| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
| |
ay8910: pass outputs high-impedance state with mem_mask
|
|
|
|
| |
(#12822)
|
| |
|
|
|
| |
New BSD-licensed implementation of Yamaha OPN and OPM FM audio chips, along with new device drivers for YM2203, YM2608, YM2610, YM2610B, YM2612, YM3438, and YM2151 based upon these.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Significant internal changes to sound streams:
Abstracted buffers of sound data into an internal stream_buffer class, with helper classes read_stream_view and write_stream_view which offer readable/writable "views" into the buffers
Internal sound calculations are all done using stream_buffer::sample_t, which is a 32-bit float; existing callbacks are supported through an adapter that converts to/from signed 32-bit integers
Improved behavior of dynamic stream sample rate changes to resample a short runway of data to preserve continuity across transitions
Created a new stream update callback which passes a std::vector of read_stream_views for inputs, and a std::vector of write_stream_views for outputs
Updated core mixer and speaker devices to the new stream update callback
Updated the following sound cores to the new stream update callback: ay8910, dac, k054539, msm5205, namco, netlist, okim6295, pokey, samples, sn76496, sp0250, tms5220, tms57002, upd7759, vgm_visualizer, volt_reg
Changed existing stream update callback to make inputs explicitly const and the output pointers const as well, since they are re-used across calls; fixed several engines that violated this rule
Sound_manager::stream_alloc can no longer automatically connect to a device's sound_stream_update callback; instead, the stream_alloc() on the sound_device_interface should be called; updated many violators of this rule
Streams can be created with SAMPLE_RATE_OUTPUT_ADAPTIVE, which dynamically tracks the sample rate of its first downstream output, or with SAMPLE_RATE_INPUT_ADAPTIVE, which tracks the sample rate of its first input
Changed resampling to be a separate sound_stream that is invoked as needed, opening the path for selectable resampling implementations
Added a flags parameter to the new stream allocation method that allows you to specify a that input streams should not be resampled
Exposed stream_input and stream_output classes directly, simplifying access to user gains and stream names
Added a simple dynamic compressor to sound_manager to provide nicer results when overdriven sound happens; compression does not affect speaker_report results
Improved verbose speaker_report to print a graph of peaks over time
More aggressive debugging enabled for now even in release builds (should be disabled prior to next release) via SOUND_DEBUG define in sound.h; report any assertions for fixing
|
|
|
|
|
| |
- it has Yamaha volume parameter, single sound output and internal divider.
- Developed by Yamaha
|
| |
|
|
|
|
|
|
| |
* ay8910.cpp : Fix naming
* ay8910.cpp : Fix typo
|
|
|
|
|
|
|
| |
* ay8910.cpp : Updates
Implement ay8930 expanded mode, Add notes, Add feature value for chip specific features, Add runtime pin26 handler, Use struct for tone, envelope, Reduce defines, Fix spacings, Reduce unnecessary lines
* ay8910.cpp : Revert unnecessary part
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This effectively reverts b380514764cf857469bae61c11143a19f79a74c5 and
c24473ddff715ecec2e258a6eb38960cf8c8e98e, restoring the state at
598cd5227223c3b04ca31f0dbc1981256d9ea3ff.
Before pushing, please check that what you're about to push is sane.
Check your local commit log and ensure there isn't anything out-of-place
before pushing to mainline. When things like this happen, it wastes
everyone's time. I really don't need this in a week when real work™ is
busting my balls and I'm behind where I want to be with preparing for
MAME release.
|
|
|
|
|
| |
This reverts commit c24473ddff715ecec2e258a6eb38960cf8c8e98e, reversing
changes made to 009cba4fb8102102168ef32870892438327f3705.
|
|
|
|
|
|
|
| |
Use shorter / correct type values, Remove unnecessary arguments in handlers, Duplicates
device/bus/coco/cococart.cpp : Allow various types of delegates for install handler
5clown.cpp : Remove unnecessary arguments in some handler
kchamp.cpp : Remove unnecessary arguments in some handler
|
|
|
|
|
|
|
|
|
|
|
|
| |
* ay8910.cpp : Add notes for AY8930 expanded mode
* ay8910.cpp : Additional logs
* add mode register for debugging
* ay8910.cpp : Minor fix
* ay8910.cpp : Additional fix
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
There are multiple issues with the current device callbacks:
* They always dispatch through a pointer-to-member
* Chained callbacks are a linked list so the branch unit can't predict the early
* There's a runtime decision made on the left/right shift direction
* There are runtime NULL checks on various objects
* Binding a lambda isn't practical
* Arbitrary transformations are not supported
* When chaining callbacks it isn't clear what the MCFG_DEVCB_ modifiers apply to
* It isn't possible to just append to a callback in derived configuration
* The macros need a magic, hidden local called devcb
* Moving code that uses the magic locals around is error-prone
* Writing the MCFG_ macros to make a device usable is a pain
* You can't discover applicable MCFG_ macros with intellisense
* Macros are not scoped
* Using an inappropriate macro isn't detected at compile time
* Lots of other things
This changeset overcomes the biggest obstacle to remving MCFG_ macros
altogether. Essentially, to allow a devcb to be configured, call
.bind() and expose the result (a bind target for the callback). Bind
target methods starting with "set" repace the current callbacks; methods
starting with "append" append to them. You can't reconfigure a callback
after resolving it. There's no need to use a macro matching the
handler signatures - use FUNC for everything. Current device is implied
if no tag/finder is supplied (no need for explicit this).
Lambdas are supported, and the memory space and offset are optional.
These kinds of things work:
* .read_cb().set([this] () { return something; });
* .read_cb().set([this] (offs_t offset) { return ~offset; });
* .write_cb().set([this] (offs_t offset, u8 data) { m_array[offset] = data; });
* .write_cb().set([this] (int state) { some_var = state; });
Arbitrary transforms are allowed, and they can modify offset/mask for example:
* .read_cb().set(FUNC(my_state::handler)).transform([] (u8 data) { return bitswap<4>(data, 1, 3, 0, 2); });
* .read_cb().set(m_dev, FUNC(some_device::member)).transform([] (offs_t &offset, u8 data) { offset ^= 3; return data; });
It's possible to stack arbitrary transforms, at the cost of compile
time (the whole transform stack gets inlined at compile time). Shifts
count as an arbitrary transform, but mask/exor does not.
Order of mask/shift/exor now matters. Modifications are applied in the
specified order. These are NOT EQUIVALENT:
* .read_cb().set(FUNC(my_state::handler)).mask(0x06).lshift(2);
* .read_cb().set(FUNC(my_state::handler)).lshift(2).mask(0x06);
The bit helper no longer reverses its behaviour for read callbacks, and
I/O ports are no longer aware of the field mask. Binding a read
callback to no-op is not supported - specify a constant. The GND and
VCC aliases have been removed intentionally - they're TTL-centric, and
were already being abused.
Other quirks have been preserved, including write logger only logging
when the data is non-zero (quite unhelpful in many of the cases where
it's used). Legacy syntax is still supported for simple cases, but will
be phased out. New devices should not have MCFG_ macros.
I don't think I've missed any fundamental issues, but if I've broken
something, let me know.
|
|
|
|
|
|
|
| |
suddenly silenced
* streamline templates in addrmap.h
* get rid of overloads on read/write member names - this will become even more important in the near future
|
| |
|
| |
|
|
|
|
| |
member arrays at device_start time instead [Phil Bennett]
|
|
|
|
| |
links to decaps and documentation (nw)
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
significant change, so please pay attention.
The core changes are:
* Short name, full name and source file are no longer members of device_t, they are part of the device type
* MACHINE_COFIG_START no longer needs a driver class
* MACHINE_CONFIG_DERIVED_CLASS is no longer necessary
* Specify the state class you want in the GAME/COMP/CONS line
* The compiler will work out the base class where the driver init member is declared
* There is one static device type object per driver rather than one per machine configuration
Use DECLARE_DEVICE_TYPE or DECLARE_DEVICE_TYPE_NS to declare device type.
* DECLARE_DEVICE_TYPE forward-declares teh device type and class, and declares extern object finders.
* DECLARE_DEVICE_TYPE_NS is for devices classes in namespaces - it doesn't forward-declare the device type.
Use DEFINE_DEVICE_TYPE or DEFINE_DEVICE_TYPE_NS to define device types.
* These macros declare storage for the static data, and instantiate the device type and device finder templates.
The rest of the changes are mostly just moving stuff out of headers that shouldn't be there, renaming stuff for consistency, and scoping stuff down where appropriate.
Things I've actually messed with substantially:
* More descriptive names for a lot of devices
* Untangled the fantasy sound from the driver state, which necessitates breaking up sound/flip writes
* Changed DECO BSMT2000 ready callback into a device delegate
* Untangled Microprose 3D noise from driver state
* Used object finders for CoCo multipak, KC85 D002, and Irem sound subdevices
* Started to get TI-99 stuff out of the TI-990 directory and arrange bus devices properly
* Started to break out common parts of Samsung ARM SoC devices
* Turned some of FM, SID, SCSP DSP, EPIC12 and Voodoo cores into something resmbling C++
* Tried to make Z180 table allocation/setup a bit safer
* Converted generic keyboard/terminal to not use WRITE8 - space/offset aren't relevant
* Dynamically allocate generic terminal buffer so derived devices (e.g. teleprinter) can specify size
* Imporved encapsulation of Z80DART channels
* Refactored the SPC7110 bit table generator loop to make it more readable
* Added wrappers for SNES PPU operations so members can be made protected
* Factored out some boilerplate for YM chips with PSG
* toaplan2 gfx
* stic/intv resolution
* Video System video
* Out Run/Y-board sprite alignment
* GIC video hookup
* Amstrad CPC ROM box members
* IQ151 ROM cart region
* MSX cart IRQ callback resolution time
* SMS passthrough control devices starting subslots
I've smoke-tested several drivers, but I've probably missed something. Things I've missed will likely blow up spectacularly with failure to bind errors and the like. Let me know if there's more subtle breakage (could have happened in FM or Voodoo).
And can everyone please, please try to keep stuff clean. In particular, please stop polluting the global namespace. Keep things out of headers that don't need to be there, and use things that can be scoped down rather than macros.
It feels like an uphill battle trying to get this stuff under control while more of it's added.
|
| |
|
|
|
|
| |
ay8910.
|
| |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Per Vas' request. If the compile fails for you (i'm thinking osx and
windows native debuggers here in particular), add '#include "emu.h"'
as first include of the cpp files that fail.
Due to our use of precompilation and forced inclusion, emu.h must be
included as the very first non-comment thing we do if we want to be
sure msvc compiles are identical to gcc/clang ones. Doing it directly
instead of through an include increases the correctness probability by
a magnitude.
|
|
|
|
|
| |
Use standard uint64_t, uint32_t, uint16_t or uint8_t instead of UINT64, UINT32, UINT16 or UINT8
also use standard int64_t, int32_t, int16_t or int8_t instead of INT64, INT32, INT16 or INT8
|
|
|
|
| |
be ordered from the factory with id's other than 0 (allowing you to chain multiple chips without adding extra address lines. Don't hardcode AY8910 into logerror, using name() instead. [smf]
|
| |
|
| |
|
|
|
|
| |
vgmplay, nw
|
|
|
|
|
|
|
| |
SHA-1: 1f90ceab075c4869298e963bf0a14a0aac2f1caa
* tags are now strings (nw)
fix start project for custom builds in Visual Studio (nw)
|
|
|
|
| |
This reverts commit caba131d844ade3f2b30d6be24ea6cf46b2949d7.
|
| |
|
|
|
|
| |
fix start project for custom builds in Visual Studio (nw)
|
| |
|
|
|