summaryrefslogtreecommitdiffstatshomepage
path: root/src/devices/cpu/cosmac
Commit message (Collapse)AuthorAgeFilesLines
* misc cpu: no need to check debug enabled flag manually hap2025-04-111-1/+1
|
* cosmac: add pull callbacks for int/dmain/out hap2025-02-052-3/+46
|
* cosmac: fix load init phase [Robbbert] hap2025-01-111-1/+1
|
* diexec: Add callback to allow debugger to break into the middle of wait-type ↵ AJR2024-11-171-0/+2
| | | | | | | | | | instructions whose execution time is normally indefinite. When this happens, a special message may be printed to the debug console stating the location of the last actual instruction executed before the wait (if there was one). Note that since the callback ignores the current value of the program counter, this special type of debugger break cannot be entered through breakpoints or instruction stepping commands. The callback also leaves no effect on PC history tracking or trace logs. * cpu/hd61700, cpu/tms32031: Add standard IRQ callback * cpu/m68000gen.py: Change name of invoked executable to bin/python3 * cpu/m6809: Eliminate PC "massaging" for SYNC and similar instructions
* Added ATTR_COLD to common lifecycle methods for many files in src/devices. ↵ holub2024-09-271-2/+2
| | | | (#12822)
* diexec: remove vestigal execute_input_lines() hap2024-09-182-12/+0
|
* cosmac: Fix disassembly of LBNQ, LBNZ and LBNF AJR2024-02-171-3/+3
|
* emu/devcb.h: Eliminated the need to call resolve() on callbacks. (#11333) Vas Crabb2023-06-171-35/+25
| | | | | | | | | | | | Read callbacks now need a default return value supplied at construction. Replaced isnull() with isunset() which tells you if the callback wasn't configured rather than whether it isn't safe to call. Enabled validation of device callbacks (it seems it was disabled at some point, probably accidentally). Device callbacks and object finders now implement the same interface for resolution.
* emu/device.h: Removed device (READ|WRITE)_LINE_MEMBER in favor of explicit ↵ MooglyGuy2023-06-011-9/+9
| | | | function signatures. (#11283) [Ryan Holtz]
* Interrupt callback rationalization AJR2023-03-111-6/+2
| | | | | | | | | | | - Make CPUs pass interrupt return PC as a second argument to standard_irq_callback - Add interrupt return PC to "Stopped at interrupt" message produced by debugger 'gint' command - Add messages to trace logs whenever interrupts are accepted - Attempt to step over interrupt routines for applicable debugger commands - Eliminate standard_irq_callback_member wrapper method - Update many CPU cores to invoke standard_irq_callback at the start of or during interrupt processing, rather than at the end or when the input line changes - Remove IRQ callbacks for some input lines that never cause interrupts - mb88xx, mcs48: Add IRQ callbacks for internal interrupts
* ssensor4,const: add chess symbols to internal artwork hap2022-07-181-4/+4
|
* cosmac: add 1804 counter timer hap2022-07-182-35/+157
|
* src/devices/cpu: Remove #include "debugger.h" where no longer necessary AJR2022-04-061-1/+0
|
* Debugger feature improvements AJR2022-03-271-27/+27
| | | | | | | | - Add 'gbt' and 'gbf' debugger commands to step until a true or false conditional branch has been detected. - Update over 100 of the disassemblers in MAME to output a new STEP_COND flag for all conditional branches. Besides being used for execution of the new 'gbt' and 'gbf' commands, this flag also now helps the debugger 'out' command to properly handle conditional return instructions. - Remove STEP_OVER from many instructions that aren't actually subroutine calls (e.g. DJNZ on Z80). A 'gni' debugger command (go next instruction) has been added to accommodate some of the misuse. - Add instruction flag support to several more disassemblers that lacked them entirely (e.g. st62xx) - Don't pass over delay slots for debugging in ASAP core
* Miscellaneous #include cleanup AJR2021-11-201-1/+0
|
* Eliminate ARRAY_LENGTH template in favor of C++17's std::size AJR2021-02-141-2/+2
| | | | | | | | | | * osdcomm.h: Move definition of EQUIVALENT_ARRAY to coretmpl.h * sharc.cpp, gt64xxx.cpp, ym2413.cpp, gb_lcd.cpp, snes_ppu.cpp: Use STRUCT_MEMBER for save state registration * gio/newport.cpp, megadrive/svp.cpp, nes_ctrl/bcbattle.cpp, arm7.cpp, tms9995.cpp, pckeybrd.cpp, sa1110.cpp, sa1111.cpp, jangou_blitter.cpp, vic4567.cpp: Use std::fill(_n) instead of memset * emucore.h: Remove obsolete typedef
* Enable GCC implicit fallthrough warning. Vas Crabb2020-11-151-2/+2
| | | | | | I've guessed whether break or [[fallthrough]] is appropriate. In cases where it looked particularly suspicious, I added a FIXME comment. All of these changes should be reviewed by someone familiar with the code.
* emumem: A little more speedup. cache and specific change syntax, and are ↵ Olivier Galibert2020-05-252-15/+12
| | | | | | | | | | | | | | | | not pointers anymore [O. Galibert] The last(?) two changes are: - Add a template parameter to everything (theoretically the address space width, in practice a level derived from it to keep as much compatibility between widths as possible) so that the shift size becomes a constant. - Change the syntax of declaring and initializing the caches and specifics so that they're embedded in the owner device. Solves lifetime issues and also removes one indirection (looking up the base dispatch pointer through the cache/specific pointer).
* sweeten most of the remaining arrays of delegates (nw) Vas Crabb2020-02-072-4/+3
|
* Make many device_execute_interface functions noexcept, including the ↵ AJR2019-11-092-6/+6
| | | | | | | | "information" overrides. This also covers several time-related functions in attotime, running_machine and emu_timer. (nw) m6805: Calculate min_cycles and max_cycles once at device_start time (Nw) attotime: Add as_khz and as_mhz (nw)
* cosmac: Attach following byte to disassembly of OUT instruction when P = X AJR2019-08-174-22/+33
|
* Machine promoted to working hap2019-08-132-15/+21
| | | | | | ------- Mephisto MM I [hap, Berger] Mephisto Mirage [hap, Berger]
* cosmac: Use conventional decimal numbering for registers AJR2019-08-122-19/+19
|
* cdp1805, cdp1806: Use new 1805 disassembler (nw) AJR2019-08-122-0/+9
|
* cosmac: add very preliminary 1804/5/6 (nw) hap2019-08-132-27/+246
|
* cosmac: Add disassembler support for CDP1805 with extended instruction set AJR2019-08-122-2/+76
|
* coreutil: remove single-use (and savestate unsafe) rand_memory function (nw) hap2019-08-011-1/+3
|
* (nw) cosmac: removed out-of-date comment Robbbert2019-05-151-1/+0
|
* cosmac: Fixed long branch instruction timing. [Curt Coder] Curt Coder2019-05-101-2/+0
|
* (nw) Clean up the mess on master Vas Crabb2019-03-261-0/+2
| | | | | | | | | | | | | This effectively reverts b380514764cf857469bae61c11143a19f79a74c5 and c24473ddff715ecec2e258a6eb38960cf8c8e98e, restoring the state at 598cd5227223c3b04ca31f0dbc1981256d9ea3ff. Before pushing, please check that what you're about to push is sane. Check your local commit log and ensure there isn't anything out-of-place before pushing to mainline. When things like this happen, it wastes everyone's time. I really don't need this in a week when real work™ is busting my balls and I'm behind where I want to be with preparing for MAME release.
* Revert "conflict resolution (nw)" andreasnaive2019-03-251-2/+0
| | | | | This reverts commit c24473ddff715ecec2e258a6eb38960cf8c8e98e, reversing changes made to 009cba4fb8102102168ef32870892438327f3705.
* cosmac: Don't skip over instructions in debugger after DMA cycles AJR2019-02-121-0/+2
| | | | (nw) This does nothing to fix MT #7232, but could make the problem easier to debug.
* cdp1802: Eliminate devcb2 MCFG macros (nw) AJR2018-08-171-47/+0
|
* cosmac.cpp: Clarify some minor stuff (nw) AJR2018-07-191-1/+6
|
* cosmac.cpp: Interface overhaul (nw) AJR2018-07-193-82/+143
| | | | | | | | | | | - Split execution of long branch/long skip instructions into two separate states - Eliminate reset state - Sample pushed EF lines at the right time - Implement a few CDP1801 differences - Correct disassembly of destinations for skip instructions - SC callback also includes state of N lines for I/O instructions - TPB callback added (not used yet) - Callbacks can be configured through devcb3 bindings
* cosmac.cpp: More helper functions (nw) AJR2018-07-142-3/+25
|
* cosmac: Fix disassembly; very minor cleanup (nw) AJR2018-07-133-14/+12
|
* devcb3 Vas Crabb2018-07-071-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are multiple issues with the current device callbacks: * They always dispatch through a pointer-to-member * Chained callbacks are a linked list so the branch unit can't predict the early * There's a runtime decision made on the left/right shift direction * There are runtime NULL checks on various objects * Binding a lambda isn't practical * Arbitrary transformations are not supported * When chaining callbacks it isn't clear what the MCFG_DEVCB_ modifiers apply to * It isn't possible to just append to a callback in derived configuration * The macros need a magic, hidden local called devcb * Moving code that uses the magic locals around is error-prone * Writing the MCFG_ macros to make a device usable is a pain * You can't discover applicable MCFG_ macros with intellisense * Macros are not scoped * Using an inappropriate macro isn't detected at compile time * Lots of other things This changeset overcomes the biggest obstacle to remving MCFG_ macros altogether. Essentially, to allow a devcb to be configured, call .bind() and expose the result (a bind target for the callback). Bind target methods starting with "set" repace the current callbacks; methods starting with "append" append to them. You can't reconfigure a callback after resolving it. There's no need to use a macro matching the handler signatures - use FUNC for everything. Current device is implied if no tag/finder is supplied (no need for explicit this). Lambdas are supported, and the memory space and offset are optional. These kinds of things work: * .read_cb().set([this] () { return something; }); * .read_cb().set([this] (offs_t offset) { return ~offset; }); * .write_cb().set([this] (offs_t offset, u8 data) { m_array[offset] = data; }); * .write_cb().set([this] (int state) { some_var = state; }); Arbitrary transforms are allowed, and they can modify offset/mask for example: * .read_cb().set(FUNC(my_state::handler)).transform([] (u8 data) { return bitswap<4>(data, 1, 3, 0, 2); }); * .read_cb().set(m_dev, FUNC(some_device::member)).transform([] (offs_t &offset, u8 data) { offset ^= 3; return data; }); It's possible to stack arbitrary transforms, at the cost of compile time (the whole transform stack gets inlined at compile time). Shifts count as an arbitrary transform, but mask/exor does not. Order of mask/shift/exor now matters. Modifications are applied in the specified order. These are NOT EQUIVALENT: * .read_cb().set(FUNC(my_state::handler)).mask(0x06).lshift(2); * .read_cb().set(FUNC(my_state::handler)).lshift(2).mask(0x06); The bit helper no longer reverses its behaviour for read callbacks, and I/O ports are no longer aware of the field mask. Binding a read callback to no-op is not supported - specify a constant. The GND and VCC aliases have been removed intentionally - they're TTL-centric, and were already being abused. Other quirks have been preserved, including write logger only logging when the data is non-zero (quite unhelpful in many of the cases where it's used). Legacy syntax is still supported for simple cases, but will be phased out. New devices should not have MCFG_ macros. I don't think I've missed any fundamental issues, but if I've broken something, let me know.
* emumem: Rename direct_read_handler to memory_access_cache. Parametrize the ↵ Olivier Galibert2018-05-112-4/+4
| | | | template on more information (data width, endianness) to make it possible to turn it into an handler cache eventually, and not just a memory block cache. Make it capable of large and unaligned accesses. [O. Galibert]
* Reshuffle some stuff: Vas Crabb2018-03-281-2/+2
| | | | | | * Move around the debugger hooks to get a small but measurable performance increase * Remove emucore from external tools * Improve performance of DSP16 interpreter a little by generating six variants of execution loop
* don't pass so many naked pointers around (nw) Vas Crabb2018-03-252-6/+6
|
* destaticify initializations (nw) (#3289) wilbertpol2018-03-041-20/+20
| | | | | | * destaticify initializations (nw) * fix this->set_screen (nw)
* emumem: API change [O. Galibert] Olivier Galibert2017-11-292-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * direct_read_data is now a template which takes the address bus shift as a parameter. * address_space::direct<shift>() is now a template method that takes the shift as a parameter and returns a pointer instead of a reference * the address to give to {read|write}_* on address_space or direct_read_data is now the address one wants to access Longer explanation: Up until now, the {read|write}_* methods required the caller to give the byte offset instead of the actual address. That's the same on byte-addressing CPUs, e.g. the ones everyone knows, but it's different on the word/long/quad addressing ones (tms, sharc, etc...) or the bit-addressing one (tms340x0). Changing that required templatizing the direct access interface on the bus addressing granularity, historically called address bus shift. Also, since everybody was taking the address of the reference returned by direct(), and structurally didn't have much choice in the matter, it got changed to return a pointer directly. Longest historical explanation: In a cpu core, the hottest memory access, by far, is the opcode fetching. It's also an access with very good locality (doesn't move much, tends to stay in the same rom/ram zone even when jumping around, tends not to hit handlers), which makes efficient caching worthwhile (as in, 30-50% faster core iirc on something like the 6502, but that was 20 years ago and a number of things changed since then). In fact, opcode fetching was, in the distant past, just an array lookup indexed by pc on an offset pointer, which was updated on branches. It didn't stay that way because more elaborate access is often needed (handlers, banking with instructions crossing a bank...) but it still ends up with a frontend of "if the address is still in the current range read from pointer+address otherwise do the slowpath", e.g. two usually correctly predicted branches plus the read most of the time. Then the >8 bits cpus arrived. That was ok, it just required to do the add to a u8 *, then convert to a u16/u32 * and do the read. At the asm level, it was all identical except for the final read, and read_byte/word/long being separate there was no test (and associated overhead) added in the path. Then the word-addressing CPUs arrived with, iirc, the tms cpus used in atari games. They require, to read from the pointer, to shift the address, either explicitely, or implicitely through indexing a u16 *. There were three possibilities: 1- create a new read_* method for each size and granularity. That amounts to a lot of copy/paste in the end, and functions with identical prototypes so the compiler can't detect you're using the wrong one. 2- put a variable shift in the read path. That was too expensive especially since the most critical cpus are byte-addressing (68000 at the time was the key). Having bit-adressing cpus which means the shift can either be right or left depending on the variable makes things even worse. 3- require the caller to do the shift himself when needed. The last solution was chosen, and starting that day the address was a byte offset and not the real address. Which is, actually, quite surprising when writing a new cpu core or, worse, when using the read/write methods from the driver code. But since then, C++ happened. And, in particular, templates with non-type parameters. Suddendly, solution 1 can be done without the copy/paste and with different types allowing to detect (at runtime, but systematically and at startup) if you got it wrong, while still generating optimal code. So it was time to switch to that solution and makes the address parameter sane again. Especially since it makes mucking in the rest of the memory subsystem code a lot more understandable.
* dvdisasm: Overhaul [O. Galibert] Olivier Galibert2017-11-264-101/+111
| | | | | | | | Disassemblers are now independant classes. Not only the code is cleaner, but unidasm has access to all the cpu cores again. The interface to the disassembly method has changed from byte buffers to objects that give a result to read methods. This also adds support for lfsr and/or paged PCs.
* cosmac: Added WAIT/CLEAR input lines. [Curt Coder] Curt Coder2017-11-112-6/+20
|
* explicit sizes for enums used in save states - one should always do this to ↵ Vas Crabb2017-07-162-62/+62
| | | | maximise save state compatibility - also enum class (nw)
* make device_memory_interface slightly less of a special case, use a typedef ↵ Vas Crabb2017-07-102-3/+3
| | | | to avoid nested templates everywhere (nw)
* dimemory: Lift the cap on the number of address spaces per device [O. Galibert] Olivier Galibert2017-07-032-13/+6
|
* Move static data out of devices into the device types. This is a ↵ Vas Crabb2017-05-142-58/+60
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | significant change, so please pay attention. The core changes are: * Short name, full name and source file are no longer members of device_t, they are part of the device type * MACHINE_COFIG_START no longer needs a driver class * MACHINE_CONFIG_DERIVED_CLASS is no longer necessary * Specify the state class you want in the GAME/COMP/CONS line * The compiler will work out the base class where the driver init member is declared * There is one static device type object per driver rather than one per machine configuration Use DECLARE_DEVICE_TYPE or DECLARE_DEVICE_TYPE_NS to declare device type. * DECLARE_DEVICE_TYPE forward-declares teh device type and class, and declares extern object finders. * DECLARE_DEVICE_TYPE_NS is for devices classes in namespaces - it doesn't forward-declare the device type. Use DEFINE_DEVICE_TYPE or DEFINE_DEVICE_TYPE_NS to define device types. * These macros declare storage for the static data, and instantiate the device type and device finder templates. The rest of the changes are mostly just moving stuff out of headers that shouldn't be there, renaming stuff for consistency, and scoping stuff down where appropriate. Things I've actually messed with substantially: * More descriptive names for a lot of devices * Untangled the fantasy sound from the driver state, which necessitates breaking up sound/flip writes * Changed DECO BSMT2000 ready callback into a device delegate * Untangled Microprose 3D noise from driver state * Used object finders for CoCo multipak, KC85 D002, and Irem sound subdevices * Started to get TI-99 stuff out of the TI-990 directory and arrange bus devices properly * Started to break out common parts of Samsung ARM SoC devices * Turned some of FM, SID, SCSP DSP, EPIC12 and Voodoo cores into something resmbling C++ * Tried to make Z180 table allocation/setup a bit safer * Converted generic keyboard/terminal to not use WRITE8 - space/offset aren't relevant * Dynamically allocate generic terminal buffer so derived devices (e.g. teleprinter) can specify size * Imporved encapsulation of Z80DART channels * Refactored the SPC7110 bit table generator loop to make it more readable * Added wrappers for SNES PPU operations so members can be made protected * Factored out some boilerplate for YM chips with PSG * toaplan2 gfx * stic/intv resolution * Video System video * Out Run/Y-board sprite alignment * GIC video hookup * Amstrad CPC ROM box members * IQ151 ROM cart region * MSX cart IRQ callback resolution time * SMS passthrough control devices starting subslots I've smoke-tested several drivers, but I've probably missed something. Things I've missed will likely blow up spectacularly with failure to bind errors and the like. Let me know if there's more subtle breakage (could have happened in FM or Voodoo). And can everyone please, please try to keep stuff clean. In particular, please stop polluting the global namespace. Keep things out of headers that don't need to be there, and use things that can be scoped down rather than macros. It feels like an uphill battle trying to get this stuff under control while more of it's added.
* Self-registering devices prep: Vas Crabb2017-02-271-2/+2
| | | | | | | | | | | | | | * Make device_creator a variable template and get rid of the ampersands * Remove screen.h and speaker.h from emu.h and add where necessary * Centralise instantiations of screen and speaker finder templates * Add/standardise #include guards in many hearers * Remove many redundant #includes * Order #includesr to help catch headers that can't be #included alone (nw) This changes #include order to be prefix, unit header if applicable then other stuff roughly in order from most dependent to least dependent library. This helps catch headers that don't #include things that they use.