diff options
Diffstat (limited to 'src/mess/drivers/rambo.c')
-rw-r--r-- | src/mess/drivers/rambo.c | 227 |
1 files changed, 0 insertions, 227 deletions
diff --git a/src/mess/drivers/rambo.c b/src/mess/drivers/rambo.c deleted file mode 100644 index 8dd28468990..00000000000 --- a/src/mess/drivers/rambo.c +++ /dev/null @@ -1,227 +0,0 @@ -// license:GPL-2.0+ -// copyright-holders:Felipe Sanches -/* - RAMBo (RepRap Arduino-compatible Mother Board) by UltiMachine - for controlling desktop 3d printers - http://reprap.org/wiki/Rambo - - driver by Felipe Correa da Silva Sanches <fsanches@metamaquina.com.br> - - This driver is based on the schematics of the version 1.1b: - http://reprap.org/mediawiki/images/7/75/Rambo1-1-schematic.png - - 3d printers currently supported by this driver: - * Metamáquina 2 - - 3d printers known to use this board: - * TODO: list them all here -*/ - -#include "emu.h" -#include "cpu/avr8/avr8.h" - -#define MASTER_CLOCK 16000000 - -#define LOG_PORTS 0 - -/****************************************************\ -* I/O devices * -\****************************************************/ - -class rambo_state : public driver_device -{ -public: - rambo_state(const machine_config &mconfig, device_type type, const char *tag) - : driver_device(mconfig, type, tag), - m_maincpu(*this, "maincpu") - { - } - - UINT8 m_port_a; - UINT8 m_port_b; - UINT8 m_port_c; - UINT8 m_port_d; - UINT8 m_port_e; - UINT8 m_port_f; - UINT8 m_port_g; - UINT8 m_port_h; - UINT8 m_port_j; - UINT8 m_port_k; - UINT8 m_port_l; - required_device<avr8_device> m_maincpu; - - DECLARE_READ8_MEMBER(port_r); - DECLARE_WRITE8_MEMBER(port_w); - - DECLARE_DRIVER_INIT(rambo); - virtual void machine_start(); - virtual void machine_reset(); -}; - -void rambo_state::machine_start() -{ -} - -READ8_MEMBER(rambo_state::port_r) -{ - switch( offset ) - { - case AVR8_IO_PORTA: - { -#if LOG_PORTS - printf("[%08X] Port A READ \n", m_maincpu->m_shifted_pc); -#endif - return m_port_a; - } - default: - break; - } - return 0; -} - -WRITE8_MEMBER(rambo_state::port_w) -{ - switch( offset ) - { - case AVR8_IO_PORTA: - { - if (data == m_port_a) break; - -#if LOG_PORTS - UINT8 old_port_a = m_port_a; - UINT8 changed = data ^ old_port_a; -#endif - m_port_a = data; - break; - } - default: - break; - } -} - -/****************************************************\ -* Address maps * -\****************************************************/ - -static ADDRESS_MAP_START( rambo_prg_map, AS_PROGRAM, 8, rambo_state ) - AM_RANGE(0x0000, 0x1FFFF) AM_ROM -ADDRESS_MAP_END - -static ADDRESS_MAP_START( rambo_data_map, AS_DATA, 8, rambo_state ) - AM_RANGE(0x0200, 0x21FF) AM_RAM /* ATMEGA2560 Internal SRAM */ -ADDRESS_MAP_END - -static ADDRESS_MAP_START( rambo_io_map, AS_IO, 8, rambo_state ) - AM_RANGE(AVR8_IO_PORTA, AVR8_IO_PORTL) AM_READWRITE( port_r, port_w ) -ADDRESS_MAP_END - -/****************************************************\ -* Machine definition * -\****************************************************/ - -DRIVER_INIT_MEMBER(rambo_state, rambo) -{ -} - -void rambo_state::machine_reset() -{ - m_port_a = 0; - m_port_b = 0; - m_port_c = 0; - m_port_d = 0; - m_port_e = 0; - m_port_f = 0; - m_port_g = 0; - m_port_h = 0; - m_port_j = 0; - m_port_k = 0; - m_port_l = 0; -} - -static MACHINE_CONFIG_START( rambo, rambo_state ) - - MCFG_CPU_ADD("maincpu", ATMEGA2560, MASTER_CLOCK) - MCFG_CPU_PROGRAM_MAP(rambo_prg_map) - MCFG_CPU_DATA_MAP(rambo_data_map) - MCFG_CPU_IO_MAP(rambo_io_map) - - MCFG_CPU_AVR8_EEPROM("eeprom") - MCFG_CPU_AVR8_LFUSE(0xFF) - MCFG_CPU_AVR8_HFUSE(0xDA) - MCFG_CPU_AVR8_EFUSE(0xF4) - MCFG_CPU_AVR8_LOCK(0x0F) - - /*TODO: Add an ATMEGA32U2 for USB-Serial communications */ - /*TODO: Emulate the AD5206 digipot */ - /*TODO: Emulate the A4982 stepper motor drivers and instantiate 5 of these here - for controlling the X, Y, Z, E1 (and optionally E2) motors */ - /*TODO: Simulate the heating elements */ - /*TODO: Implement the thermistor measurements */ -MACHINE_CONFIG_END - -ROM_START( metamaq2 ) - ROM_REGION( 0x20000, "maincpu", 0 ) - ROM_DEFAULT_BIOS("20131015") - - ROM_SYSTEM_BIOS( 0, "20130619", "June 19th, 2013" ) - /* SOURCE(https://github.com/Metamaquina/Repetier-Firmware/tree/MM2_2013_06_19) */ - ROMX_LOAD("repetier-fw-metamaquina2-2013-06-19.bin", 0x0000, 0x1000e, CRC(4279b178) SHA1(e4d3c9d6421287c980639c2df32d07b754adc8fc), ROM_BIOS(1)) - - ROM_SYSTEM_BIOS( 1, "20130624", "June 24th, 2013" ) - /* SOURCE(https://github.com/Metamaquina/Repetier-Firmware/tree/MM2_RC2_RAMBo_rev10e_2013_06_24) */ - ROMX_LOAD("repetier-fw-metamaquina2-2013-06-24_mm2rc2_rambo_rev10e.bin", 0x0000, 0xcebc, CRC(82400a3c) SHA1(0781ce29406ce69b63edb93d776b9c081bed841e), ROM_BIOS(2)) - - ROM_SYSTEM_BIOS( 2, "20130625", "June 25th, 2013" ) - /* SOURCE(https://github.com/Metamaquina/Repetier-Firmware/tree/MM2_2013_06_25) */ - ROMX_LOAD("repetier-fw-metamaquina2-2013-06-25.bin", 0x0000, 0x10076, CRC(e7e4db38) SHA1(0c307bb0a0ee4e9d38253936e7030d0efb3c1845), ROM_BIOS(3)) - - ROM_SYSTEM_BIOS( 3, "20130709", "July 9th, 2013" ) - /* SOURCE(https://github.com/Metamaquina/Repetier-Firmware/tree/MM2_2013_07_09) */ - ROMX_LOAD("repetier-fw-metamaquina2-2013-07-09.bin", 0x0000, 0x10078, CRC(9a45509f) SHA1(3a2e6516b45cc0ea1aef039335b02208847aaebf), ROM_BIOS(4)) - - ROM_SYSTEM_BIOS( 4, "20130712", "July 12th, 2013" ) - /* SOURCE(https://github.com/Metamaquina/Repetier-Firmware/tree/MM2_2013_07_12) */ - ROMX_LOAD("repetier-fw-metamaquina2-2013-07-12.bin", 0x0000, 0x10184, CRC(9aeac87c) SHA1(c1441096553c214c12a34da87fa42cc3f0eaf74d), ROM_BIOS(5)) - - ROM_SYSTEM_BIOS( 5, "20130717", "July 17th, 2013" ) - /* SOURCE(https://github.com/Metamaquina/Repetier-Firmware/tree/MM2_2013_07_17) */ - ROMX_LOAD("repetier-fw-metamaquina2-2013-07-17.bin", 0x0000, 0x10180, CRC(7c053ed0) SHA1(7abeabcbfdb411b6e681e2d0c9398c40b142f76b), ROM_BIOS(6)) - - ROM_SYSTEM_BIOS( 6, "20130806", "August 6th, 2013" ) - /* SOURCE(https://github.com/Metamaquina/Repetier-Firmware/tree/MM2_2013_08_06) */ - ROMX_LOAD("repetier-fw-metamaquina2-2013-08-06.bin", 0x0000, 0x1017e, CRC(6aaf5a14) SHA1(93cebee8ab9eda9d81e70504b407268a198577f0), ROM_BIOS(7)) - - ROM_SYSTEM_BIOS( 7, "20130809", "August 9th, 2013" ) - /* SOURCE(https://github.com/Metamaquina/Repetier-Firmware/tree/MM2_2013_08_09) */ - ROMX_LOAD("repetier-fw-metamaquina2-2013-08-09.bin", 0x0000, 0x1018a, CRC(ee53a011) SHA1(666d09fe69220a172528fe8d1c358e3ddaaa743a), ROM_BIOS(8)) - - ROM_SYSTEM_BIOS( 8, "20130822", "August 22nd, 2013" ) - /* SOURCE(https://github.com/Metamaquina/Repetier-Firmware/tree/MM2_2013_08_22) */ - ROMX_LOAD("repetier-fw-metamaquina2-2013-08-22.bin", 0x0000, 0x1018a, CRC(70a5a3c9) SHA1(20e52ea7bf40e71020b815b9fb6385d880677927), ROM_BIOS(9)) - - ROM_SYSTEM_BIOS( 9, "20130913", "September 13th, 2013" ) - /* source code for this one is unavailable as it was an unreleased internal development build */ - ROMX_LOAD("repetier-fw-metamaquina2-2013-09-13-devel.bin", 0x0000, 0x101bc, CRC(5e7c7933) SHA1(5b9bfe919daf705ad7a9a2de3cf4c51e3338ec47), ROM_BIOS(10)) - - ROM_SYSTEM_BIOS( 10, "20130920", "September 20th, 2013" ) - /* SOURCE(https://github.com/Metamaquina/Repetier-Firmware/tree/MM2_2013_09_20) */ - ROMX_LOAD("repetier-fw-metamaquina2-2013-09-20.bin", 0x0000, 0x10384, CRC(48378e58) SHA1(513f0a0c65219875cc467420cc091e3489b58919), ROM_BIOS(11)) - - ROM_SYSTEM_BIOS( 11, "20131015", "October 15th, 2013" ) - /* SOURCE(https://github.com/Metamaquina/Repetier-Firmware/tree/MM2_2013_10_15) */ - ROMX_LOAD("repetier-fw-metamaquina2-2013-10-15.bin", 0x0000, 0x102c8, CRC(520134bd) SHA1(dfe2251aad06972f237eb4920ce14ccb32da5af0), ROM_BIOS(12)) - - /*Arduino MEGA bootloader */ - /* This is marked as a BAD_DUMP because we're not sure this is the bootloader we're actually using. - This is inherited from the Replicator 1 driver. - A proper dump would be good. - Also, it is not clear whether there's any difference in the bootloader - between the ATMEGA1280 and the ATMEGA2560 MCUs */ - ROM_LOAD( "atmegaboot_168_atmega1280.bin", 0x1f000, 0x0f16, BAD_DUMP CRC(c041f8db) SHA1(d995ebf360a264cccacec65f6dc0c2257a3a9224) ) - - /* on-die 4kbyte eeprom */ - ROM_REGION( 0x1000, "eeprom", ROMREGION_ERASEFF ) -ROM_END - -/* YEAR NAME PARENT COMPAT MACHINE INPUT CLASS INIT COMPANY FULLNAME */ -COMP(2012, metamaq2, 0, 0, rambo, 0, rambo_state, rambo, "Metamaquina", "Metamaquina 2 desktop 3d printer", GAME_NOT_WORKING | GAME_NO_SOUND) |