summaryrefslogtreecommitdiffstatshomepage
path: root/src/devices/video/cdp1861.cpp
Commit message (Collapse)AuthorAgeFilesLines
* emu/devcb.h: Eliminated the need to call resolve() on callbacks. (#11333) Vas Crabb2023-06-171-5/+0
| | | | | | | | | | | | Read callbacks now need a default return value supplied at construction. Replaced isnull() with isunset() which tells you if the callback wasn't configured rather than whether it isn't safe to call. Enabled validation of device callbacks (it seems it was disabled at some point, probably accidentally). Device callbacks and object finders now implement the same interface for resolution.
* - Removed device_timer, device_timer_id, et al in favor of direct callback ↵ MooglyGuy2022-06-041-66/+62
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | members. (#9788) Primarily, this removes device_t::device_timer, device_t::timer_set, device_t::synchronize, device_t::timer_expired, and device_timer_id. Use of device_timer often resulted in unnecessary trampolining in addition to switch/case overhead on a driver/device level, and additional logic to manage delegated vs. ID-based timers on a core level. In the worst cases, devices were performing a switch/case with only one valid case. device_scheduler::timer_set is marked deprecated as the only remaining direct uses are via the Lua engine and a few drivers that need refactoring anyway. The remaining uses occur via device_scheduler::synchronize. As a middle ground between the extremely short timer_alloc() and the extremely long machine().scheduler().timer_alloc(timer_expired_delegate(FUNC(widget_device::contoso_tick), this)), a helper function in device_t has been added which can be invoked with the following syntax: timer_alloc(FUNC(widget_device::contoso_tick), this) - Additional changes/cleanups performed along the way: - Converted to use logmacro: * src/devices/bus/ieee488/hp9895.cpp * src/devices/bus/ieee488/remote488.cpp * src/devices/bus/isa/hdc.cpp * src/devices/bus/isa/omti8621.cpp * src/devices/bus/isa/sc499.cpp * src/devices/bus/vip/vp550.cpp * src/devices/cpu/i86/i186.cpp * src/devices/cpu/lc8670/lc8670.cpp * src/devices/machine/68230pit.cpp * src/devices/machine/corvushd.cpp * src/devices/machine/ds1994.cpp * src/devices/machine/ticket.cpp * src/mame/audio/pinsnd88.cpp * src/mame/drivers/notetaker.cpp * src/mame/machine/asic65.cpp * src/mame/machine/rmnimbus.cpp * src/mame/machine/victor9k_fdc.cpp * src/mame/video/uv201.cpp - Made usage of m_member prefix consistent: * src/devices/bus/isa/hdc.cpp * src/devices/bus/isa/omti8621.cpp * src/devices/bus/vme/vme_fccpu20.cpp * src/devices/machine/ds1386.cpp * src/devices/machine/i7220.cpp - Spacing consistency pass: * src/devices/bus/isa/hdc.cpp * src/devices/bus/isa/omti8621.cpp * src/devices/bus/thomson/nanoresau.cpp * src/devices/bus/ti99/internal/992board.cpp * src/devices/bus/ti99/internal/genkbd.cpp * src/devices/bus/ti99/internal/joyport/handset.cpp * src/devices/bus/vme/vme_fccpu20.cpp * src/devices/cpu/i86/i186.cpp * src/devices/cpu/lc8670/lc8670.cpp * src/devices/machine/68230pit.cpp * src/devices/machine/cop452.cpp * src/devices/machine/corvushd.cpp * src/devices/machine/hp_dc100_tape.cpp * src/devices/machine/hp_taco.cpp * src/devices/machine/meters.cpp * src/devices/machine/microtch.cpp * src/devices/machine/phi.cpp * src/devices/video/ef9365.cpp * src/devices/video/v9938.cpp * src/mame/drivers/alphaskop41xx.cpp * src/mame/drivers/myb3k.cpp * src/mame/drivers/notetaker.cpp * src/mame/drivers/wpc_an.cpp * src/mame/machine/midikbd.cpp * src/mame/machine/rmnimbus.cpp * src/mame/machine/wpc_lamp.cpp * src/mame/machine/wpc_out.cpp - Removed string-based ioport lookups: * src/devices/bus/ti99/internal/joyport/handset.cpp * src/devices/bus/ti99/internal/joyport/mecmouse.cpp * src/devices/bus/vme/vme_hcpu30.cpp * src/mame/machine/k7659kb.cpp * src/mame/machine/ti85.cpp - Adjustments to grammar/wording in comments * src/devices/bus/sms_ctrl/lphaser.cpp * src/devices/bus/sms_ctrl/sports.cpp * src/devices/bus/snes/event.cpp * src/devices/bus/snes/sa1.cpp * src/devices/bus/thomson/nanoresau.cpp * src/devices/bus/z88/z88.cpp * src/devices/machine/ds1386.cpp * src/devices/machine/vic_pl192.cpp - Favored BIT() macro for single-bit checks * src/devices/bus/ti99/internal/992board.cpp * src/devices/bus/ti99/joyport/handset.cpp * src/mame/drivers/notetaker.cpp * src/mame/machine/wpc_lamp.cpp * src/mame/machine/wpc_out.cpp - Removed C89-style variable declarations when noticed * src/devices/bus/isa/hdc.cpp * src/devices/bus/sms_ctrl/lphaser.cpp * src/devices/bus/ti99/joyport/mecmouse.cpp * src/devices/machine/acorn_vidc.cpp * src/devices/sound/ymz280b.cpp * src/devices/video/vic4567.cpp - Removed FUNCNAME to avoid compiler-specific #define checks in devices * src/devices/bus/vme/vme_fccpu20.cpp * src/devices/bus/vme/vme_hcpu30.cpp * src/devices/machine/68230pit.cpp * src/devices/machine/mc14411.cpp * src/mame/drivers/myb3k.cpp - Removed unecessary member prefixes/suffixes * src/devices/video/ef9340_1.cpp * src/mame/drivers/fuukifg2.cpp * src/mame/drivers/fuukifg3.cpp * src/mame/drivers/intv.cpp * src/mame/drivers/simpsons.cpp * src/mame/drivers/socrates.cpp * src/mame/drivers/special_gambl.cpp * src/mame/drivers/sprint4.cpp * src/mame/drivers/ti990_10.cpp * src/mame/drivers/tubep.cpp * src/mame/drivers/vectrex.cpp * src/mame/drivers/wpc_an.cpp * src/mame/drivers/wpc_dot.cpp * src/mame/drivers/wpc_flip1.cpp * src/mame/drivers/wpc_flip2.cpp * src/mame/machine/z80ne.cpp * src/mame/video/rollerg.cpp - Switched to lower-case hex constants * src/devices/video/ef9365.cpp * src/mame/machine/rmnimbus.cpp - Re-ordered driver overrides and function members * src/mame/drivers/boxer.cpp * src/mame/drivers/eurocom2.cpp * src/mame/drivers/exidy.cpp * src/mame/drivers/gpworld.cpp * src/mame/drivers/h19.cpp * src/mame/drivers/ibmpcjr.cpp * src/mame/drivers/mekd5.cpp * src/mame/drivers/mgolf.cpp * src/mame/drivers/myb3k.cpp * src/mame/drivers/nightmare.cpp * src/mame/drivers/notetaker.cpp * src/mame/drivers/ptcsol.cpp * src/mame/drivers/pwrview.cpp * src/mame/drivers/rabbit.cpp * src/mame/drivers/sitcom.cpp * src/mame/drivers/socrates.cpp * src/mame/drivers/sprint4.cpp * src/mame/drivers/techno.cpp * src/mame/drivers/thayers.cpp * src/mame/drivers/ti990_10.cpp * src/mame/drivers/ti990_4.cpp * src/mame/drivers/tv912.cpp * src/mame/drivers/tv990.cpp * src/mame/drivers/uchroma68.cpp * src/mame/drivers/vk100.cpp * src/mame/drivers/votrhv.cpp * src/mame/drivers/wicat.cpp * src/mame/drivers/wpc_an.cpp * src/mame/includes/abc80.h * src/mame/includes/asterix.h * src/mame/includes/fuukifg2.h * src/mame/includes/fuukifg3.h * src/mame/includes/gunbustr.h * src/mame/includes/intv.h * src/mame/includes/namcona1.h * src/mame/includes/newbrain.h * src/mame/includes/poly.h * src/mame/includes/prof80.h * src/mame/includes/rollerg.h * src/mame/includes/s11.h * src/mame/includes/segahang.h * src/mame/includes/simpsons.h * src/mame/includes/spacefb.h * src/mame/includes/tandy2k.h * src/mame/includes/trucocl.h * src/mame/includes/tubebp.h * src/mame/includes/vidbrain.h * src/mame/includes/wolfpack.h * src/mame/includes/wpc_dot.h - Made capitalization consistent on class members * src/devices/machine/meters.cpp * src/mame/drivers/namcona1.cpp * src/mame/drivers/notetaker.cpp -src/devices/bus/isa/hdc.cpp: * Removed fixed-size std::vector in favor of std::unique_ptr -src/devices/bus/isa/s3virge.cpp: * Moved unusually large (for a header) functions into .cpp from header -src/devices/bus/vip/vp550.cpp * Switched to required_device_array to simplify code paths -src/devices/machine/arm_iomd.cpp * Added initializers to constructor * Favored std::size over fixed static sizes -src/devices/machine/ds1386.cpp * Moved register #defines into header enums -src/devices/machine/mc68901.cpp * Removed unnecessary parameters and emu_timer::enable calls -src/devices/machine/mccs1850.cpp * Removed inline overuse -src/devices/machine/meters.cpp * Removed unused members -src/devices/machine/mos6526.cpp * Removed inline overuse -src/devices/machine/nsc810.cpp * Converted to arrays rather than individually-numbered members -src/devices/machine/pxa255.cpp * Simplified DMA transfer code -src/devices/machine/saa1043.cpp * Removed extraneous members in favor of resolve_all_safe -src/devices/machine/vic_pl192.cpp * Shifted constructors, start-up, and maps to be at the top of the source file -src/devices/machine/z8536.cpp * Removed stray uses of device_timer_id -src/devices/sound/cdp1869.cpp * Removed inline overuse -src/devices/sound/mos7360.cpp * Converted to arrays rather than individually-numbered members -src/emu/device.cpp * Removed ID-based timer_alloc * Removed timer_set * Removed synchronize * Removed timer_expired * Added shorthand timer_alloc to avoid lengthy machine().scheduler().timer_alloc() calls -src/emu/schedule.cpp * Removed now-unused m_id and m_device members -src/mame/audio/alesis.cpp * Added initializers to constructor -src/mame/drivers/alto2.cpp * Removed custom-named driver init in favor of driver_init override * Removed octal constant in favor of more standard hex -src/mame/drivers/astinvad.cpp * Fixed 'kamizake' typo -src/mame/drivers/tm990189.cpp * Removed unnecessary machine reset override -src/mame/drivers/unichamp.cpp * Removed custom-named driver init in favor of driver_init override -src/mame/drivers/votrhv.cpp * Fixed ROM_LOAD macros and region() usage in memory maps -src/mame/machine/victor9k_fdc.cpp * Made bracing style consistent across the file -src/mame/video/gime.cpp * Removed unnecessary void specifiers in function prototypes
* Remove void *ptr parameter from emu_timer, timer_device and all related ↵ AJR2022-01-261-1/+1
| | | | callbacks
* Cleaned up bitmap API. Vas Crabb2020-09-271-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Made const-qualified pixel accessors (pix, pixt, raw_pixptr) return const-qualified references/pointers to pixesl, and added non-const versions. This makes bitmap more like standard library containers where const protects the content as well as the dimensions. Made the templated pixt accessor protected - having it public makes it too easy to inadvertently get a pointer to the wrong location. Removed the pix(8|16|32|64) accessors from the specific bitmaps. You could only use the "correct" one anyway, and having the "incorrect" ones available prevented explicit instantiations of the class template because the static assertions would fail. You can still see the pixel type in the bitmap class names, and you can't assign the result of &pix(y, x) to the wrong kind of pointer without a cast. Added fill member functions to the specific bitmap template, and added a explicit instantiations. This allows the bitmap size check to be skipped on most bitmap fills, although the clipping check is still there. Also fixed a couple of places that were trying to fill an indexed 16-bit bitmap with rgb_t::black() exposed by this (replaced with zero to get the same net effect). The explicit template instantiations in the .cpp file mean the compiler can inline the function if necessary, but don't need to generate a local out-of-line body if it chooses not to. Extended the size of the fill value parameter in the base bitmap class to 64 bits so it works correctly for 64-bit bitmaps. Fixed places where IE15 and VGM visualiser weren't accounting for row bytes potentially being larger than width. Fixed an off-by-one in an HP-DIO card where it was treating the Topcat cursor right edge as exclusive. Updated everything to work with the API changes, reduced the scope of many variables, added more const, and replaced a few fill/copy loops with stuff from <algorithm>.
* devices\video: simplify handlers for a few devices (nw) Ivan Vangelista2020-03-061-3/+3
|
* Make devdelegate more like devcb for configuration. This is a Vas Crabb2019-10-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | fundamental change to show device delegates are configured. Device delegates are now aware of the current device during configuration and will resolve string tags relative to it. This means that device delegates need a device to be supplied on construction so they can find the machine configuration object. There's a one-dimensional array helper to make it easier to construct arrays of device delegates with the same owner. (I didn't make an n-dimensional one because I didn't hit a use case, but it would be a simple addition.) There's no more bind_relative_to member - just call resolve() like you would for a devcb. There's also no need to cast nullptr when creating a late bind device delegate. The flip side is that for an overloaded or non-capturing lambda you'll need to cast to the desired type. There is one less conditional branch in the hot path for calls for delegates bound to a function pointer of member function pointer. This comes at the cost of one additional unconditional branch in the hot path for calls to delegates bound to functoids (lambdas, functions that don't take an object reference, other callable objects). This applies to all delegates, not just device delegates. Address spaces will now print an error message if a late bind error is encountered while installing a handler. This will give the range and address range, hopefully making it easier to guess which memory map is faulty. For the simple case of allowing a device_delegate member to be configured, use a member like this: template <typename... T> void set_foo(T &&...args) { m_foo_cb.set(std::forward<T>(args)...); } For a case where different delegates need to be used depending on the function signature, see src/emu/screen.h (the screen update function setters). Device delegates now take a target specification and function pointer. The target may be: * Target omitted, implying the current device being configured. This can only be used during configuration. It will work as long as the current device is not removed/replaced. * A tag string relative to the current device being configured. This can only be used during configuration. It will not be callable until .resolve() is called. It will work as long as the current device is not removed/replaced. * A device finder (required_device/optional_device). The delegate will late bind to the current target of the device finder. It will not be callable until .resolve() is called. It will work properly if the target device is replaced, as long as the device finder's base object isn't removed/replaced. * A reference to an object. It will be callable immediately. It will work as long as the target object is not removed/replaced. The target types and restrictions are pretty similar to what you already have on object finders and devcb, so it shouldn't cause any surprises. Note that dereferencing a device finder will changes the effect. To illustrate this: ... required_device<some_device> m_dev; ... m_dev(*this, "dev") ... // will late bind to "dev" relative to *this // will work if "dev" hasn't been created yet or is replaced later // won't work if *this is removed/replaced // won't be callable until resolve() is called cb1.set(m_dev, FUNC(some_device::w)); ... // will bind to current target of m_dev // will not work if m_dev is not resolved // will not work if "dev" is replaced later // will be callable immediately cb2.set(*m_dev, FUNC(some_device::w)); ... The order of the target and name has been reversed for functoids (lambdas and other callable objects). This allows the NAME macro to be used on lambdas and functoids. For example: foo.set_something(NAME([this] (u8 data) { m_something = data; })); I realise the diagnostic messages get ugly if you use NAME on a large lambda. You can still give a literal name, you just have to place it after the lambda rather than before. This is uglier, but it's intentional. I'm trying to drive developers away from a certain style. While it's nice that you can put half the driver code in the memory map, it detracts from readability. It's hard to visualise the memory range mappings if the memory map functions are punctuated by large lambdas. There's also slightly higher overhead for calling a delegate bound to a functoid. If the code is prettier for trivial lambdas but uglier for non-trivial lambdas in address maps, it will hopefully steer people away from putting non-trivial lambdas in memory maps. There were some devices that were converted from using plain delegates without adding bind_relative_to calls. I fixed some of them (e.g. LaserDisc) but I probably missed some. These will likely crash on unresolved delegate calls. There are some devices that reset delegates at configuration complete or start time, preventing them from being set up during configuration (e.g. src/devices/video/ppu2c0x.cpp and src/devices/machine/68307.cpp). This goes against the design principles of how device delegates should be used, but I didn't change them because I don't trust myself to find all the places they're used. I've definitely broken some stuff with this (I know about asterix), so report issues and bear with me until I get it all fixed.
* cosmac: Fixed long branch instruction timing. [Curt Coder] Curt Coder2019-05-101-7/+0
|
* (nw) studio2 : notes; fixed mpt02h; patch to get studio2 working Robbbert2019-05-101-0/+37
|
* screen.h: Fix have_screen_update(), which was broken and returned false ↵ AJR2018-08-221-1/+1
| | | | | | under any valid configuration, and rename the function has_screen_update(). This fixes regressions in granny and other drivers using custom update functions with CDP1861, CDP1864 and TMS992x VDPs. tms9928a: Eliminate the clock validity check, which has fulfilled its purpose (nw)
* divideo: Fetch screen to be potentially configured during ↵ AJR2018-08-211-5/+18
| | | | | | | | | | device_config_complete (nw) - Allow device finder to be used as an argument for set_screen (nw) screen: Calculate physical aspect ratio whenever required, not in device_config_complete, since the renderer caches the result anyway (nw) cdp1861, cdp1864: Eliminate the "magic reference" constructors, doing their work in device_config_complete instead (nw)
* cdp1861, cdp1864: Hook in screens efficiently without using MCFG (nw) AJR2018-08-171-0/+8
|
* cdp1861, cdp1862: Convert callbacks to devcb3 (nw) AJR2018-08-171-6/+6
|
* Privatize m_screen and other variables of device_video_interface (nw) AJR2018-01-051-12/+12
|
* coverity, cleanup, constructor delegation (nw) Vas Crabb2017-06-031-9/+9
|
* Move static data out of devices into the device types. This is a ↵ Vas Crabb2017-05-141-20/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | significant change, so please pay attention. The core changes are: * Short name, full name and source file are no longer members of device_t, they are part of the device type * MACHINE_COFIG_START no longer needs a driver class * MACHINE_CONFIG_DERIVED_CLASS is no longer necessary * Specify the state class you want in the GAME/COMP/CONS line * The compiler will work out the base class where the driver init member is declared * There is one static device type object per driver rather than one per machine configuration Use DECLARE_DEVICE_TYPE or DECLARE_DEVICE_TYPE_NS to declare device type. * DECLARE_DEVICE_TYPE forward-declares teh device type and class, and declares extern object finders. * DECLARE_DEVICE_TYPE_NS is for devices classes in namespaces - it doesn't forward-declare the device type. Use DEFINE_DEVICE_TYPE or DEFINE_DEVICE_TYPE_NS to define device types. * These macros declare storage for the static data, and instantiate the device type and device finder templates. The rest of the changes are mostly just moving stuff out of headers that shouldn't be there, renaming stuff for consistency, and scoping stuff down where appropriate. Things I've actually messed with substantially: * More descriptive names for a lot of devices * Untangled the fantasy sound from the driver state, which necessitates breaking up sound/flip writes * Changed DECO BSMT2000 ready callback into a device delegate * Untangled Microprose 3D noise from driver state * Used object finders for CoCo multipak, KC85 D002, and Irem sound subdevices * Started to get TI-99 stuff out of the TI-990 directory and arrange bus devices properly * Started to break out common parts of Samsung ARM SoC devices * Turned some of FM, SID, SCSP DSP, EPIC12 and Voodoo cores into something resmbling C++ * Tried to make Z180 table allocation/setup a bit safer * Converted generic keyboard/terminal to not use WRITE8 - space/offset aren't relevant * Dynamically allocate generic terminal buffer so derived devices (e.g. teleprinter) can specify size * Imporved encapsulation of Z80DART channels * Refactored the SPC7110 bit table generator loop to make it more readable * Added wrappers for SNES PPU operations so members can be made protected * Factored out some boilerplate for YM chips with PSG * toaplan2 gfx * stic/intv resolution * Video System video * Out Run/Y-board sprite alignment * GIC video hookup * Amstrad CPC ROM box members * IQ151 ROM cart region * MSX cart IRQ callback resolution time * SMS passthrough control devices starting subslots I've smoke-tested several drivers, but I've probably missed something. Things I've missed will likely blow up spectacularly with failure to bind errors and the like. Let me know if there's more subtle breakage (could have happened in FM or Voodoo). And can everyone please, please try to keep stuff clean. In particular, please stop polluting the global namespace. Keep things out of headers that don't need to be there, and use things that can be scoped down rather than macros. It feels like an uphill battle trying to get this stuff under control while more of it's added.
* Self-registering devices prep: Vas Crabb2017-02-271-1/+1
| | | | | | | | | | | | | | * Make device_creator a variable template and get rid of the ampersands * Remove screen.h and speaker.h from emu.h and add where necessary * Centralise instantiations of screen and speaker finder templates * Add/standardise #include guards in many hearers * Remove many redundant #includes * Order #includesr to help catch headers that can't be #included alone (nw) This changes #include order to be prefix, unit header if applicable then other stuff roughly in order from most dependent to least dependent library. This helps catch headers that don't #include things that they use.
* Erase bitmap_rgb32::erase (nw) AJR2016-10-221-1/+1
|
* Improvements to rgb_t (nw) AJR2016-10-221-2/+2
| | | | | | | - Make most class methods constexpr - Make color constants (white, black, etc.) into constexpr factory methods, in order to fix a static initialization problem discussed on the MAMEWorld forums. (Note that while C++14 allows constexpr member variables to be initialized outside classes, current compilers' support for C++14 constexpr rules has proven to be lamentably deficient.) - Create bitmap_rgb32::erase to simplify syntax in update handlers
* NOTICE (TYPE NAME CONSOLIDATION) Miodrag Milanovic2016-10-221-2/+2
| | | | | Use standard uint64_t, uint32_t, uint16_t or uint8_t instead of UINT64, UINT32, UINT16 or UINT8 also use standard int64_t, int32_t, int16_t or int8_t instead of INT64, INT32, INT16 or INT8
* reverting: Miodrag Milanovic2016-01-201-1/+1
| | | | | | | SHA-1: 1f90ceab075c4869298e963bf0a14a0aac2f1caa * tags are now strings (nw) fix start project for custom builds in Visual Studio (nw)
* tags are now strings (nw) Miodrag Milanovic2016-01-161-1/+1
| | | | fix start project for custom builds in Visual Studio (nw)
* Rename *.c -> *.cpp in our source (nw) Miodrag Milanovic2015-11-081-0/+253