| Commit message (Collapse) | Author | Age | Files | Lines |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
* 6522via: Don't generate a signal on PB7 when the timer 1 latch is
programmed with 0.
On the Victor 9000, the clock for the audio codec is generated by a
via6522. PB7 is connected to the codec's clock input. Non-speech
sounds (e.g. beeps, musical notes) are produced by outputting a cyclical
waveform from the codec, with the pitch determined by the frequency of
the codec clock.
Software running on the Victor 9000 has been observed to attempt to
silence the audio by writing 0 to the T1 timer latch (not by turning off
continuous mode or PB7 output). With the emulated via6522, this resulted
in a high-frequency clock signal being output on PB7, causing a
high-pitched squeal whenever notes are not being played.
From this observed behavior we could infer that the original 6522 HW
does not output a signal on PB7 when the latch value is 0, and that the
Victor 9000 software was relying on this behaviour to silence the audio
output (one would have to assume that the real hardware didn't produce
a squeal).
* mc6852: fix various transmit-related issues which were preventing
victor9k Audio output from working.
The expected behavior of mc6852 is to write the data received in the
FIFO register serially via tx_data_callback(). However, this was not
implemented, and the only way data in the transmit FIFO could be
removed and transmitted was by calling get_tx_byte(), and to then
serially transmit the data by some external mechanism.
Only m68sfdc.cpp calls get_tx_byte(), so it's hard to see how any
other device using the mc6852 would have been able to transmit data.
Software running on victor9k attempting to play audio would hang,
since it would block waiting for the TX FIFO to empty. With these
changes, Victor 9000 audio playback works as expected, with the data
getting sent serially to the Audio codec.
In order to avoid breaking m68sfdc, a new API call is added to allow
data to be sent the "old" way. m68sfdc now calls
set_tx_pull_mode(true), to get the previous behavior. As I understand
it, other devices using mc6852 must be broken, and would need to
be revisited.
* victor9k: complete Audio support, adding a low-pass filter after
the HC-55516 codec. Mark victor9k Audio as working.
|
| |
|
|
| |
mm2: remove copypasted input ports
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Read callbacks now need a default return value supplied at construction.
Replaced isnull() with isunset() which tells you if the callback wasn't
configured rather than whether it isn't safe to call.
Enabled validation of device callbacks (it seems it was disabled at some
point, probably accidentally).
Device callbacks and object finders now implement the same interface for
resolution.
|
| |
|
|
| |
function signatures. (#11283) [Ryan Holtz]
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
members. (#9788)
Primarily, this removes device_t::device_timer, device_t::timer_set,
device_t::synchronize, device_t::timer_expired, and device_timer_id.
Use of device_timer often resulted in unnecessary trampolining in
addition to switch/case overhead on a driver/device level, and
additional logic to manage delegated vs. ID-based timers on a core
level. In the worst cases, devices were performing a switch/case with
only one valid case.
device_scheduler::timer_set is marked deprecated as the only remaining
direct uses are via the Lua engine and a few drivers that need
refactoring anyway. The remaining uses occur via
device_scheduler::synchronize.
As a middle ground between the extremely short timer_alloc() and the
extremely long
machine().scheduler().timer_alloc(timer_expired_delegate(FUNC(widget_device::contoso_tick), this)),
a helper function in device_t has been added which can be invoked with
the following syntax:
timer_alloc(FUNC(widget_device::contoso_tick), this)
- Additional changes/cleanups performed along the way:
- Converted to use logmacro:
* src/devices/bus/ieee488/hp9895.cpp
* src/devices/bus/ieee488/remote488.cpp
* src/devices/bus/isa/hdc.cpp
* src/devices/bus/isa/omti8621.cpp
* src/devices/bus/isa/sc499.cpp
* src/devices/bus/vip/vp550.cpp
* src/devices/cpu/i86/i186.cpp
* src/devices/cpu/lc8670/lc8670.cpp
* src/devices/machine/68230pit.cpp
* src/devices/machine/corvushd.cpp
* src/devices/machine/ds1994.cpp
* src/devices/machine/ticket.cpp
* src/mame/audio/pinsnd88.cpp
* src/mame/drivers/notetaker.cpp
* src/mame/machine/asic65.cpp
* src/mame/machine/rmnimbus.cpp
* src/mame/machine/victor9k_fdc.cpp
* src/mame/video/uv201.cpp
- Made usage of m_member prefix consistent:
* src/devices/bus/isa/hdc.cpp
* src/devices/bus/isa/omti8621.cpp
* src/devices/bus/vme/vme_fccpu20.cpp
* src/devices/machine/ds1386.cpp
* src/devices/machine/i7220.cpp
- Spacing consistency pass:
* src/devices/bus/isa/hdc.cpp
* src/devices/bus/isa/omti8621.cpp
* src/devices/bus/thomson/nanoresau.cpp
* src/devices/bus/ti99/internal/992board.cpp
* src/devices/bus/ti99/internal/genkbd.cpp
* src/devices/bus/ti99/internal/joyport/handset.cpp
* src/devices/bus/vme/vme_fccpu20.cpp
* src/devices/cpu/i86/i186.cpp
* src/devices/cpu/lc8670/lc8670.cpp
* src/devices/machine/68230pit.cpp
* src/devices/machine/cop452.cpp
* src/devices/machine/corvushd.cpp
* src/devices/machine/hp_dc100_tape.cpp
* src/devices/machine/hp_taco.cpp
* src/devices/machine/meters.cpp
* src/devices/machine/microtch.cpp
* src/devices/machine/phi.cpp
* src/devices/video/ef9365.cpp
* src/devices/video/v9938.cpp
* src/mame/drivers/alphaskop41xx.cpp
* src/mame/drivers/myb3k.cpp
* src/mame/drivers/notetaker.cpp
* src/mame/drivers/wpc_an.cpp
* src/mame/machine/midikbd.cpp
* src/mame/machine/rmnimbus.cpp
* src/mame/machine/wpc_lamp.cpp
* src/mame/machine/wpc_out.cpp
- Removed string-based ioport lookups:
* src/devices/bus/ti99/internal/joyport/handset.cpp
* src/devices/bus/ti99/internal/joyport/mecmouse.cpp
* src/devices/bus/vme/vme_hcpu30.cpp
* src/mame/machine/k7659kb.cpp
* src/mame/machine/ti85.cpp
- Adjustments to grammar/wording in comments
* src/devices/bus/sms_ctrl/lphaser.cpp
* src/devices/bus/sms_ctrl/sports.cpp
* src/devices/bus/snes/event.cpp
* src/devices/bus/snes/sa1.cpp
* src/devices/bus/thomson/nanoresau.cpp
* src/devices/bus/z88/z88.cpp
* src/devices/machine/ds1386.cpp
* src/devices/machine/vic_pl192.cpp
- Favored BIT() macro for single-bit checks
* src/devices/bus/ti99/internal/992board.cpp
* src/devices/bus/ti99/joyport/handset.cpp
* src/mame/drivers/notetaker.cpp
* src/mame/machine/wpc_lamp.cpp
* src/mame/machine/wpc_out.cpp
- Removed C89-style variable declarations when noticed
* src/devices/bus/isa/hdc.cpp
* src/devices/bus/sms_ctrl/lphaser.cpp
* src/devices/bus/ti99/joyport/mecmouse.cpp
* src/devices/machine/acorn_vidc.cpp
* src/devices/sound/ymz280b.cpp
* src/devices/video/vic4567.cpp
- Removed FUNCNAME to avoid compiler-specific #define checks in devices
* src/devices/bus/vme/vme_fccpu20.cpp
* src/devices/bus/vme/vme_hcpu30.cpp
* src/devices/machine/68230pit.cpp
* src/devices/machine/mc14411.cpp
* src/mame/drivers/myb3k.cpp
- Removed unecessary member prefixes/suffixes
* src/devices/video/ef9340_1.cpp
* src/mame/drivers/fuukifg2.cpp
* src/mame/drivers/fuukifg3.cpp
* src/mame/drivers/intv.cpp
* src/mame/drivers/simpsons.cpp
* src/mame/drivers/socrates.cpp
* src/mame/drivers/special_gambl.cpp
* src/mame/drivers/sprint4.cpp
* src/mame/drivers/ti990_10.cpp
* src/mame/drivers/tubep.cpp
* src/mame/drivers/vectrex.cpp
* src/mame/drivers/wpc_an.cpp
* src/mame/drivers/wpc_dot.cpp
* src/mame/drivers/wpc_flip1.cpp
* src/mame/drivers/wpc_flip2.cpp
* src/mame/machine/z80ne.cpp
* src/mame/video/rollerg.cpp
- Switched to lower-case hex constants
* src/devices/video/ef9365.cpp
* src/mame/machine/rmnimbus.cpp
- Re-ordered driver overrides and function members
* src/mame/drivers/boxer.cpp
* src/mame/drivers/eurocom2.cpp
* src/mame/drivers/exidy.cpp
* src/mame/drivers/gpworld.cpp
* src/mame/drivers/h19.cpp
* src/mame/drivers/ibmpcjr.cpp
* src/mame/drivers/mekd5.cpp
* src/mame/drivers/mgolf.cpp
* src/mame/drivers/myb3k.cpp
* src/mame/drivers/nightmare.cpp
* src/mame/drivers/notetaker.cpp
* src/mame/drivers/ptcsol.cpp
* src/mame/drivers/pwrview.cpp
* src/mame/drivers/rabbit.cpp
* src/mame/drivers/sitcom.cpp
* src/mame/drivers/socrates.cpp
* src/mame/drivers/sprint4.cpp
* src/mame/drivers/techno.cpp
* src/mame/drivers/thayers.cpp
* src/mame/drivers/ti990_10.cpp
* src/mame/drivers/ti990_4.cpp
* src/mame/drivers/tv912.cpp
* src/mame/drivers/tv990.cpp
* src/mame/drivers/uchroma68.cpp
* src/mame/drivers/vk100.cpp
* src/mame/drivers/votrhv.cpp
* src/mame/drivers/wicat.cpp
* src/mame/drivers/wpc_an.cpp
* src/mame/includes/abc80.h
* src/mame/includes/asterix.h
* src/mame/includes/fuukifg2.h
* src/mame/includes/fuukifg3.h
* src/mame/includes/gunbustr.h
* src/mame/includes/intv.h
* src/mame/includes/namcona1.h
* src/mame/includes/newbrain.h
* src/mame/includes/poly.h
* src/mame/includes/prof80.h
* src/mame/includes/rollerg.h
* src/mame/includes/s11.h
* src/mame/includes/segahang.h
* src/mame/includes/simpsons.h
* src/mame/includes/spacefb.h
* src/mame/includes/tandy2k.h
* src/mame/includes/trucocl.h
* src/mame/includes/tubebp.h
* src/mame/includes/vidbrain.h
* src/mame/includes/wolfpack.h
* src/mame/includes/wpc_dot.h
- Made capitalization consistent on class members
* src/devices/machine/meters.cpp
* src/mame/drivers/namcona1.cpp
* src/mame/drivers/notetaker.cpp
-src/devices/bus/isa/hdc.cpp:
* Removed fixed-size std::vector in favor of std::unique_ptr
-src/devices/bus/isa/s3virge.cpp:
* Moved unusually large (for a header) functions into .cpp from header
-src/devices/bus/vip/vp550.cpp
* Switched to required_device_array to simplify code paths
-src/devices/machine/arm_iomd.cpp
* Added initializers to constructor
* Favored std::size over fixed static sizes
-src/devices/machine/ds1386.cpp
* Moved register #defines into header enums
-src/devices/machine/mc68901.cpp
* Removed unnecessary parameters and emu_timer::enable calls
-src/devices/machine/mccs1850.cpp
* Removed inline overuse
-src/devices/machine/meters.cpp
* Removed unused members
-src/devices/machine/mos6526.cpp
* Removed inline overuse
-src/devices/machine/nsc810.cpp
* Converted to arrays rather than individually-numbered members
-src/devices/machine/pxa255.cpp
* Simplified DMA transfer code
-src/devices/machine/saa1043.cpp
* Removed extraneous members in favor of resolve_all_safe
-src/devices/machine/vic_pl192.cpp
* Shifted constructors, start-up, and maps to be at the top of the source file
-src/devices/machine/z8536.cpp
* Removed stray uses of device_timer_id
-src/devices/sound/cdp1869.cpp
* Removed inline overuse
-src/devices/sound/mos7360.cpp
* Converted to arrays rather than individually-numbered members
-src/emu/device.cpp
* Removed ID-based timer_alloc
* Removed timer_set
* Removed synchronize
* Removed timer_expired
* Added shorthand timer_alloc to avoid lengthy machine().scheduler().timer_alloc() calls
-src/emu/schedule.cpp
* Removed now-unused m_id and m_device members
-src/mame/audio/alesis.cpp
* Added initializers to constructor
-src/mame/drivers/alto2.cpp
* Removed custom-named driver init in favor of driver_init override
* Removed octal constant in favor of more standard hex
-src/mame/drivers/astinvad.cpp
* Fixed 'kamizake' typo
-src/mame/drivers/tm990189.cpp
* Removed unnecessary machine reset override
-src/mame/drivers/unichamp.cpp
* Removed custom-named driver init in favor of driver_init override
-src/mame/drivers/votrhv.cpp
* Fixed ROM_LOAD macros and region() usage in memory maps
-src/mame/machine/victor9k_fdc.cpp
* Made bracing style consistent across the file
-src/mame/video/gime.cpp
* Removed unnecessary void specifiers in function prototypes
|
| |
|
|
| |
readca1_handler/readca2_handler/readcb1_handler hookups [smf]
|
| |
|
|
| |
callbacks
|
| | |
|
|
|
New WORKING machines
--------------------------
Motorola M6800 EXORciser (M68SDT) [68bit]
|