summaryrefslogtreecommitdiffstatshomepage
path: root/src/devices/cpu/sh/sh2.cpp
Commit message (Collapse)AuthorAgeFilesLines
* misc cpu: no need to check debug enabled flag manually hap2025-04-111-1/+1
|
* diexec: Add callback to allow debugger to break into the middle of wait-type ↵ AJR2024-11-171-0/+1
| | | | | | | | | | instructions whose execution time is normally indefinite. When this happens, a special message may be printed to the debug console stating the location of the last actual instruction executed before the wait (if there was one). Note that since the callback ignores the current value of the program counter, this special type of debugger break cannot be entered through breakpoints or instruction stepping commands. The callback also leaves no effect on PC history tracking or trace logs. * cpu/hd61700, cpu/tms32031: Add standard IRQ callback * cpu/m68000gen.py: Change name of invoked executable to bin/python3 * cpu/m6809: Eliminate PC "massaging" for SYNC and similar instructions
* cpu/sh: Improved SH7021 SoC emulation. (#11610) [Ryan Holtz, Phil Bennett] Phil Bennett2023-10-161-94/+117
| | | | | * Added (rudimentary) SH7021 DMA, timers and GPIO, and logging for the rest. * Fixed SH2 NMIs occurring in a delay slot when using the interpreter. * Generally cleaned up code and renamed functions/macros/variables more conventionally.
* cpu/sh: Refactored SH-2 refactored code to separate onboard peripherals from ↵ 9871238791132023-08-271-510/+108
| | | | CPU core. (#11500)
* Interrupt callback rationalization AJR2023-03-111-2/+2
| | | | | | | | | | | - Make CPUs pass interrupt return PC as a second argument to standard_irq_callback - Add interrupt return PC to "Stopped at interrupt" message produced by debugger 'gint' command - Add messages to trace logs whenever interrupts are accepted - Attempt to step over interrupt routines for applicable debugger commands - Eliminate standard_irq_callback_member wrapper method - Update many CPU cores to invoke standard_irq_callback at the start of or during interrupt processing, rather than at the end or when the input line changes - Remove IRQ callbacks for some input lines that never cause interrupts - mb88xx, mcs48: Add IRQ callbacks for internal interrupts
* h8, sh2: Add exception hook calls AJR2022-09-231-0/+4
|
* - Removed device_timer, device_timer_id, et al in favor of direct callback ↵ MooglyGuy2022-06-041-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | members. (#9788) Primarily, this removes device_t::device_timer, device_t::timer_set, device_t::synchronize, device_t::timer_expired, and device_timer_id. Use of device_timer often resulted in unnecessary trampolining in addition to switch/case overhead on a driver/device level, and additional logic to manage delegated vs. ID-based timers on a core level. In the worst cases, devices were performing a switch/case with only one valid case. device_scheduler::timer_set is marked deprecated as the only remaining direct uses are via the Lua engine and a few drivers that need refactoring anyway. The remaining uses occur via device_scheduler::synchronize. As a middle ground between the extremely short timer_alloc() and the extremely long machine().scheduler().timer_alloc(timer_expired_delegate(FUNC(widget_device::contoso_tick), this)), a helper function in device_t has been added which can be invoked with the following syntax: timer_alloc(FUNC(widget_device::contoso_tick), this) - Additional changes/cleanups performed along the way: - Converted to use logmacro: * src/devices/bus/ieee488/hp9895.cpp * src/devices/bus/ieee488/remote488.cpp * src/devices/bus/isa/hdc.cpp * src/devices/bus/isa/omti8621.cpp * src/devices/bus/isa/sc499.cpp * src/devices/bus/vip/vp550.cpp * src/devices/cpu/i86/i186.cpp * src/devices/cpu/lc8670/lc8670.cpp * src/devices/machine/68230pit.cpp * src/devices/machine/corvushd.cpp * src/devices/machine/ds1994.cpp * src/devices/machine/ticket.cpp * src/mame/audio/pinsnd88.cpp * src/mame/drivers/notetaker.cpp * src/mame/machine/asic65.cpp * src/mame/machine/rmnimbus.cpp * src/mame/machine/victor9k_fdc.cpp * src/mame/video/uv201.cpp - Made usage of m_member prefix consistent: * src/devices/bus/isa/hdc.cpp * src/devices/bus/isa/omti8621.cpp * src/devices/bus/vme/vme_fccpu20.cpp * src/devices/machine/ds1386.cpp * src/devices/machine/i7220.cpp - Spacing consistency pass: * src/devices/bus/isa/hdc.cpp * src/devices/bus/isa/omti8621.cpp * src/devices/bus/thomson/nanoresau.cpp * src/devices/bus/ti99/internal/992board.cpp * src/devices/bus/ti99/internal/genkbd.cpp * src/devices/bus/ti99/internal/joyport/handset.cpp * src/devices/bus/vme/vme_fccpu20.cpp * src/devices/cpu/i86/i186.cpp * src/devices/cpu/lc8670/lc8670.cpp * src/devices/machine/68230pit.cpp * src/devices/machine/cop452.cpp * src/devices/machine/corvushd.cpp * src/devices/machine/hp_dc100_tape.cpp * src/devices/machine/hp_taco.cpp * src/devices/machine/meters.cpp * src/devices/machine/microtch.cpp * src/devices/machine/phi.cpp * src/devices/video/ef9365.cpp * src/devices/video/v9938.cpp * src/mame/drivers/alphaskop41xx.cpp * src/mame/drivers/myb3k.cpp * src/mame/drivers/notetaker.cpp * src/mame/drivers/wpc_an.cpp * src/mame/machine/midikbd.cpp * src/mame/machine/rmnimbus.cpp * src/mame/machine/wpc_lamp.cpp * src/mame/machine/wpc_out.cpp - Removed string-based ioport lookups: * src/devices/bus/ti99/internal/joyport/handset.cpp * src/devices/bus/ti99/internal/joyport/mecmouse.cpp * src/devices/bus/vme/vme_hcpu30.cpp * src/mame/machine/k7659kb.cpp * src/mame/machine/ti85.cpp - Adjustments to grammar/wording in comments * src/devices/bus/sms_ctrl/lphaser.cpp * src/devices/bus/sms_ctrl/sports.cpp * src/devices/bus/snes/event.cpp * src/devices/bus/snes/sa1.cpp * src/devices/bus/thomson/nanoresau.cpp * src/devices/bus/z88/z88.cpp * src/devices/machine/ds1386.cpp * src/devices/machine/vic_pl192.cpp - Favored BIT() macro for single-bit checks * src/devices/bus/ti99/internal/992board.cpp * src/devices/bus/ti99/joyport/handset.cpp * src/mame/drivers/notetaker.cpp * src/mame/machine/wpc_lamp.cpp * src/mame/machine/wpc_out.cpp - Removed C89-style variable declarations when noticed * src/devices/bus/isa/hdc.cpp * src/devices/bus/sms_ctrl/lphaser.cpp * src/devices/bus/ti99/joyport/mecmouse.cpp * src/devices/machine/acorn_vidc.cpp * src/devices/sound/ymz280b.cpp * src/devices/video/vic4567.cpp - Removed FUNCNAME to avoid compiler-specific #define checks in devices * src/devices/bus/vme/vme_fccpu20.cpp * src/devices/bus/vme/vme_hcpu30.cpp * src/devices/machine/68230pit.cpp * src/devices/machine/mc14411.cpp * src/mame/drivers/myb3k.cpp - Removed unecessary member prefixes/suffixes * src/devices/video/ef9340_1.cpp * src/mame/drivers/fuukifg2.cpp * src/mame/drivers/fuukifg3.cpp * src/mame/drivers/intv.cpp * src/mame/drivers/simpsons.cpp * src/mame/drivers/socrates.cpp * src/mame/drivers/special_gambl.cpp * src/mame/drivers/sprint4.cpp * src/mame/drivers/ti990_10.cpp * src/mame/drivers/tubep.cpp * src/mame/drivers/vectrex.cpp * src/mame/drivers/wpc_an.cpp * src/mame/drivers/wpc_dot.cpp * src/mame/drivers/wpc_flip1.cpp * src/mame/drivers/wpc_flip2.cpp * src/mame/machine/z80ne.cpp * src/mame/video/rollerg.cpp - Switched to lower-case hex constants * src/devices/video/ef9365.cpp * src/mame/machine/rmnimbus.cpp - Re-ordered driver overrides and function members * src/mame/drivers/boxer.cpp * src/mame/drivers/eurocom2.cpp * src/mame/drivers/exidy.cpp * src/mame/drivers/gpworld.cpp * src/mame/drivers/h19.cpp * src/mame/drivers/ibmpcjr.cpp * src/mame/drivers/mekd5.cpp * src/mame/drivers/mgolf.cpp * src/mame/drivers/myb3k.cpp * src/mame/drivers/nightmare.cpp * src/mame/drivers/notetaker.cpp * src/mame/drivers/ptcsol.cpp * src/mame/drivers/pwrview.cpp * src/mame/drivers/rabbit.cpp * src/mame/drivers/sitcom.cpp * src/mame/drivers/socrates.cpp * src/mame/drivers/sprint4.cpp * src/mame/drivers/techno.cpp * src/mame/drivers/thayers.cpp * src/mame/drivers/ti990_10.cpp * src/mame/drivers/ti990_4.cpp * src/mame/drivers/tv912.cpp * src/mame/drivers/tv990.cpp * src/mame/drivers/uchroma68.cpp * src/mame/drivers/vk100.cpp * src/mame/drivers/votrhv.cpp * src/mame/drivers/wicat.cpp * src/mame/drivers/wpc_an.cpp * src/mame/includes/abc80.h * src/mame/includes/asterix.h * src/mame/includes/fuukifg2.h * src/mame/includes/fuukifg3.h * src/mame/includes/gunbustr.h * src/mame/includes/intv.h * src/mame/includes/namcona1.h * src/mame/includes/newbrain.h * src/mame/includes/poly.h * src/mame/includes/prof80.h * src/mame/includes/rollerg.h * src/mame/includes/s11.h * src/mame/includes/segahang.h * src/mame/includes/simpsons.h * src/mame/includes/spacefb.h * src/mame/includes/tandy2k.h * src/mame/includes/trucocl.h * src/mame/includes/tubebp.h * src/mame/includes/vidbrain.h * src/mame/includes/wolfpack.h * src/mame/includes/wpc_dot.h - Made capitalization consistent on class members * src/devices/machine/meters.cpp * src/mame/drivers/namcona1.cpp * src/mame/drivers/notetaker.cpp -src/devices/bus/isa/hdc.cpp: * Removed fixed-size std::vector in favor of std::unique_ptr -src/devices/bus/isa/s3virge.cpp: * Moved unusually large (for a header) functions into .cpp from header -src/devices/bus/vip/vp550.cpp * Switched to required_device_array to simplify code paths -src/devices/machine/arm_iomd.cpp * Added initializers to constructor * Favored std::size over fixed static sizes -src/devices/machine/ds1386.cpp * Moved register #defines into header enums -src/devices/machine/mc68901.cpp * Removed unnecessary parameters and emu_timer::enable calls -src/devices/machine/mccs1850.cpp * Removed inline overuse -src/devices/machine/meters.cpp * Removed unused members -src/devices/machine/mos6526.cpp * Removed inline overuse -src/devices/machine/nsc810.cpp * Converted to arrays rather than individually-numbered members -src/devices/machine/pxa255.cpp * Simplified DMA transfer code -src/devices/machine/saa1043.cpp * Removed extraneous members in favor of resolve_all_safe -src/devices/machine/vic_pl192.cpp * Shifted constructors, start-up, and maps to be at the top of the source file -src/devices/machine/z8536.cpp * Removed stray uses of device_timer_id -src/devices/sound/cdp1869.cpp * Removed inline overuse -src/devices/sound/mos7360.cpp * Converted to arrays rather than individually-numbered members -src/emu/device.cpp * Removed ID-based timer_alloc * Removed timer_set * Removed synchronize * Removed timer_expired * Added shorthand timer_alloc to avoid lengthy machine().scheduler().timer_alloc() calls -src/emu/schedule.cpp * Removed now-unused m_id and m_device members -src/mame/audio/alesis.cpp * Added initializers to constructor -src/mame/drivers/alto2.cpp * Removed custom-named driver init in favor of driver_init override * Removed octal constant in favor of more standard hex -src/mame/drivers/astinvad.cpp * Fixed 'kamizake' typo -src/mame/drivers/tm990189.cpp * Removed unnecessary machine reset override -src/mame/drivers/unichamp.cpp * Removed custom-named driver init in favor of driver_init override -src/mame/drivers/votrhv.cpp * Fixed ROM_LOAD macros and region() usage in memory maps -src/mame/machine/victor9k_fdc.cpp * Made bracing style consistent across the file -src/mame/video/gime.cpp * Removed unnecessary void specifiers in function prototypes
* src/devices/cpu: Remove #include "debugger.h" where no longer necessary AJR2022-04-061-2/+0
|
* finally retired the READ8/16/32/64 and WRITE8/16/32/64 macros (nw) Ivan Vangelista2020-06-181-1/+1
|
* emumem: A little more speedup. cache and specific change syntax, and are ↵ Olivier Galibert2020-05-251-6/+6
| | | | | | | | | | | | | | | | not pointers anymore [O. Galibert] The last(?) two changes are: - Add a template parameter to everything (theoretically the address space width, in practice a level derived from it to keep as much compatibility between widths as possible) so that the shift size becomes a constant. - Change the syntax of declaring and initializing the caches and specifics so that they're embedded in the owner device. Solves lifetime issues and also removes one indirection (looking up the base dispatch pointer through the cache/specific pointer).
* cpu\sh2: initialize stuff (nw) Ivan Vangelista2019-12-141-0/+2
|
* sh2: implement watchdog timer MetalliC2019-11-071-0/+2
|
* Make devdelegate more like devcb for configuration. This is a Vas Crabb2019-10-261-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | fundamental change to show device delegates are configured. Device delegates are now aware of the current device during configuration and will resolve string tags relative to it. This means that device delegates need a device to be supplied on construction so they can find the machine configuration object. There's a one-dimensional array helper to make it easier to construct arrays of device delegates with the same owner. (I didn't make an n-dimensional one because I didn't hit a use case, but it would be a simple addition.) There's no more bind_relative_to member - just call resolve() like you would for a devcb. There's also no need to cast nullptr when creating a late bind device delegate. The flip side is that for an overloaded or non-capturing lambda you'll need to cast to the desired type. There is one less conditional branch in the hot path for calls for delegates bound to a function pointer of member function pointer. This comes at the cost of one additional unconditional branch in the hot path for calls to delegates bound to functoids (lambdas, functions that don't take an object reference, other callable objects). This applies to all delegates, not just device delegates. Address spaces will now print an error message if a late bind error is encountered while installing a handler. This will give the range and address range, hopefully making it easier to guess which memory map is faulty. For the simple case of allowing a device_delegate member to be configured, use a member like this: template <typename... T> void set_foo(T &&...args) { m_foo_cb.set(std::forward<T>(args)...); } For a case where different delegates need to be used depending on the function signature, see src/emu/screen.h (the screen update function setters). Device delegates now take a target specification and function pointer. The target may be: * Target omitted, implying the current device being configured. This can only be used during configuration. It will work as long as the current device is not removed/replaced. * A tag string relative to the current device being configured. This can only be used during configuration. It will not be callable until .resolve() is called. It will work as long as the current device is not removed/replaced. * A device finder (required_device/optional_device). The delegate will late bind to the current target of the device finder. It will not be callable until .resolve() is called. It will work properly if the target device is replaced, as long as the device finder's base object isn't removed/replaced. * A reference to an object. It will be callable immediately. It will work as long as the target object is not removed/replaced. The target types and restrictions are pretty similar to what you already have on object finders and devcb, so it shouldn't cause any surprises. Note that dereferencing a device finder will changes the effect. To illustrate this: ... required_device<some_device> m_dev; ... m_dev(*this, "dev") ... // will late bind to "dev" relative to *this // will work if "dev" hasn't been created yet or is replaced later // won't work if *this is removed/replaced // won't be callable until resolve() is called cb1.set(m_dev, FUNC(some_device::w)); ... // will bind to current target of m_dev // will not work if m_dev is not resolved // will not work if "dev" is replaced later // will be callable immediately cb2.set(*m_dev, FUNC(some_device::w)); ... The order of the target and name has been reversed for functoids (lambdas and other callable objects). This allows the NAME macro to be used on lambdas and functoids. For example: foo.set_something(NAME([this] (u8 data) { m_something = data; })); I realise the diagnostic messages get ugly if you use NAME on a large lambda. You can still give a literal name, you just have to place it after the lambda rather than before. This is uglier, but it's intentional. I'm trying to drive developers away from a certain style. While it's nice that you can put half the driver code in the memory map, it detracts from readability. It's hard to visualise the memory range mappings if the memory map functions are punctuated by large lambdas. There's also slightly higher overhead for calling a delegate bound to a functoid. If the code is prettier for trivial lambdas but uglier for non-trivial lambdas in address maps, it will hopefully steer people away from putting non-trivial lambdas in memory maps. There were some devices that were converted from using plain delegates without adding bind_relative_to calls. I fixed some of them (e.g. LaserDisc) but I probably missed some. These will likely crash on unresolved delegate calls. There are some devices that reset delegates at configuration complete or start time, preventing them from being set up during configuration (e.g. src/devices/video/ppu2c0x.cpp and src/devices/machine/68307.cpp). This goes against the design principles of how device delegates should be used, but I didn't change them because I don't trust myself to find all the places they're used. I've definitely broken some stuff with this (I know about asterix), so report issues and bear with me until I get it all fixed.
* (nw) removed every remaining AM_ macro I could find in comments, but one in ↵ Ivan Vangelista2019-10-101-3/+3
| | | | emu\memarray.h cause I didn't want to cause a full recompile for this (nw)
* sh2.cpp/sh4.cpp: Don't emit fast RAM accesses when the debugger is enabled ↵ Philip Bennett2019-09-241-43/+46
| | | | [Phil Bennett]
* SH2 clock multiplier docs MetalliC2019-08-291-1/+1
|
* srcclean (nw) Vas Crabb2019-06-231-14/+14
|
* mega32x.cpp: refactor and convert read/write handlers to 16-bit space ↵ Angelo Salese2019-06-221-2/+2
| | | | [Angelo Salese]
* sh2.cpp: first pass over SH7604 SoC refactoring [Angelo Salese] Angelo Salese2019-06-211-29/+178
| | | | * Fixed division unit overflow flag clearance;
* (nw) Clean up the mess on master Vas Crabb2019-03-261-1/+1
| | | | | | | | | | | | | This effectively reverts b380514764cf857469bae61c11143a19f79a74c5 and c24473ddff715ecec2e258a6eb38960cf8c8e98e, restoring the state at 598cd5227223c3b04ca31f0dbc1981256d9ea3ff. Before pushing, please check that what you're about to push is sane. Check your local commit log and ensure there isn't anything out-of-place before pushing to mainline. When things like this happen, it wastes everyone's time. I really don't need this in a week when real work™ is busting my balls and I'm behind where I want to be with preparing for MAME release.
* Revert "conflict resolution (nw)" andreasnaive2019-03-251-1/+1
| | | | | This reverts commit c24473ddff715ecec2e258a6eb38960cf8c8e98e, reversing changes made to 009cba4fb8102102168ef32870892438327f3705.
* sh2: Fix interpreter for cps3 [O. Galibert] Olivier Galibert2019-01-191-1/+1
|
* as if millions of this pointers suddenly cried out in terror, and were ↵ Vas Crabb2018-06-081-9/+9
| | | | | | | suddenly silenced * streamline templates in addrmap.h * get rid of overloads on read/write member names - this will become even more important in the near future
* emumem: Rename direct_read_handler to memory_access_cache. Parametrize the ↵ Olivier Galibert2018-05-111-1/+17
| | | | template on more information (data width, endianness) to make it possible to turn it into an handler cache eventually, and not just a memory block cache. Make it capable of large and unaligned accesses. [O. Galibert]
* Make MCFG_DEVICE_ADD and callable device types more flexible: Vas Crabb2018-05-041-0/+4
| | | | | | | | | | | | | | | | | | | | | * Allows defaulted clocks (see subtle example with vboy) * Allows additional constructors (see RS232 port in tranz330) * Allows use of device finder in place of tag in MCFG_DEVICE_ADD * Requires out-of-line destructor for devices using incomplete types * Requires XTAL or explicit u32 for clocks for devices with private types Devices must still define the standard constructor. When writing additional constructors, be aware that the constructor runs before device_add_mconfig in the context of the existing device, not the new device. See osborne1, zorba, tranz330, and vboy for examples of this in use. Compilation is a bit slower, but this is temporary while refactoring is in progress. Eliminated the need for MCFG_SOUND_ROUTE_EX. Removed macros from slot option configuration - they just obfuscated code and slowed it down with needless dynamic casts, but didn't actually simplify it.
* maps: Finish devices/cpu (nw) Olivier Galibert2018-04-201-15/+18
|
* Reshuffle some stuff: Vas Crabb2018-03-281-1/+1
| | | | | | * Move around the debugger hooks to get a small but measurable performance increase * Remove emucore from external tools * Improve performance of DSP16 interpreter a little by generating six variants of execution loop
* don't pass so many naked pointers around (nw) Vas Crabb2018-03-251-27/+22
|
* Blind faith fixed long names for almost all CPUs (nw) angelosa2018-03-151-3/+3
| | | | mb86235.cpp: renamed pcs_ptr into pcp, and added a file for future interpreter core (nw)
* API change: Memory maps are now methods of the owner class [O. Galibert] Olivier Galibert2018-02-121-6/+6
| | | | | Also, a lot more freedom happened, that's going to be more visible soon.
* API change: Memory maps are now "last entry wins" [O. Galibert] Olivier Galibert2018-01-311-2/+2
| | | | | | | This allows for the much more natural "import another map and patch it" structure, or "cover a whole region then punch holes in it". Our previous first-entry-wins rule was always a surprise to newcomers, and oldcomers too.
* emumem: API change [O. Galibert] Olivier Galibert2017-11-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * direct_read_data is now a template which takes the address bus shift as a parameter. * address_space::direct<shift>() is now a template method that takes the shift as a parameter and returns a pointer instead of a reference * the address to give to {read|write}_* on address_space or direct_read_data is now the address one wants to access Longer explanation: Up until now, the {read|write}_* methods required the caller to give the byte offset instead of the actual address. That's the same on byte-addressing CPUs, e.g. the ones everyone knows, but it's different on the word/long/quad addressing ones (tms, sharc, etc...) or the bit-addressing one (tms340x0). Changing that required templatizing the direct access interface on the bus addressing granularity, historically called address bus shift. Also, since everybody was taking the address of the reference returned by direct(), and structurally didn't have much choice in the matter, it got changed to return a pointer directly. Longest historical explanation: In a cpu core, the hottest memory access, by far, is the opcode fetching. It's also an access with very good locality (doesn't move much, tends to stay in the same rom/ram zone even when jumping around, tends not to hit handlers), which makes efficient caching worthwhile (as in, 30-50% faster core iirc on something like the 6502, but that was 20 years ago and a number of things changed since then). In fact, opcode fetching was, in the distant past, just an array lookup indexed by pc on an offset pointer, which was updated on branches. It didn't stay that way because more elaborate access is often needed (handlers, banking with instructions crossing a bank...) but it still ends up with a frontend of "if the address is still in the current range read from pointer+address otherwise do the slowpath", e.g. two usually correctly predicted branches plus the read most of the time. Then the >8 bits cpus arrived. That was ok, it just required to do the add to a u8 *, then convert to a u16/u32 * and do the read. At the asm level, it was all identical except for the final read, and read_byte/word/long being separate there was no test (and associated overhead) added in the path. Then the word-addressing CPUs arrived with, iirc, the tms cpus used in atari games. They require, to read from the pointer, to shift the address, either explicitely, or implicitely through indexing a u16 *. There were three possibilities: 1- create a new read_* method for each size and granularity. That amounts to a lot of copy/paste in the end, and functions with identical prototypes so the compiler can't detect you're using the wrong one. 2- put a variable shift in the read path. That was too expensive especially since the most critical cpus are byte-addressing (68000 at the time was the key). Having bit-adressing cpus which means the shift can either be right or left depending on the variable makes things even worse. 3- require the caller to do the shift himself when needed. The last solution was chosen, and starting that day the address was a byte offset and not the real address. Which is, actually, quite surprising when writing a new cpu core or, worse, when using the read/write methods from the driver code. But since then, C++ happened. And, in particular, templates with non-type parameters. Suddendly, solution 1 can be done without the copy/paste and with different types allowing to detect (at runtime, but systematically and at startup) if you got it wrong, while still generating optimal code. So it was time to switch to that solution and makes the address parameter sane again. Especially since it makes mucking in the rest of the memory subsystem code a lot more understandable.
* dvdisasm: Overhaul [O. Galibert] Olivier Galibert2017-11-261-5/+3
| | | | | | | | Disassemblers are now independant classes. Not only the code is cleaner, but unidasm has access to all the cpu cores again. The interface to the disassembly method has changed from byte buffers to objects that give a result to read methods. This also adds support for lfsr and/or paged PCs.
* srcclean (nw) Vas Crabb2017-10-221-2/+2
|
* Preliminary SH3 / SH4 recompiler [David Haywood] (#2711) David Haywood2017-10-111-2116/+406
|
* use 'sh' instead of 'superh' David Haywood2017-10-021-0/+2704