| Commit message (Collapse) | Author | Age | Files | Lines |
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
| |
* The Linux/4004 firmware gets very upset if the CSD looks like an SDHC
Card but the card acts like an SD Card or vice versa.
-machine/spi_psram.cpp: Added SPI ram device compatible with SPI SRAM
and Pseudo-SRAM chips for small transfers. Additional functionality
will be added as use cases arise.
-cpu/mcs40: Don't log messages about NOP aliases for the 4004 (the
Linux/4004 firmware uses these for instrumentation points).
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Read callbacks now need a default return value supplied at construction.
Replaced isnull() with isunset() which tells you if the callback wasn't
configured rather than whether it isn't safe to call.
Enabled validation of device callbacks (it seems it was disabled at some
point, probably accidentally).
Device callbacks and object finders now implement the same interface for
resolution.
|
| |
|
|
|
|
|
|
|
| |
Uses decay rules, so if a delegate returns a reference and you want to
supply a referene to an object you don't want copied as the default
result, remember to use std::ref.
Updated a few devices to use resolve_safe on device delegates to
streamline code.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
not pointers anymore [O. Galibert]
The last(?) two changes are:
- Add a template parameter to everything (theoretically the address
space width, in practice a level derived from it to keep as much
compatibility between widths as possible) so that the shift size
becomes a constant.
- Change the syntax of declaring and initializing the caches and
specifics so that they're embedded in the owner device. Solves
lifetime issues and also removes one indirection (looking up the base
dispatch pointer through the cache/specific pointer).
|
| | |
|
| |
|
|
|
|
|
|
| |
"information" overrides. This also covers several time-related functions in attotime, running_machine and emu_timer. (nw)
m6805: Calculate min_cycles and max_cycles once at device_start time (Nw)
attotime: Add as_khz and as_mhz (nw)
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
fundamental change to show device delegates are configured.
Device delegates are now aware of the current device during
configuration and will resolve string tags relative to it. This means
that device delegates need a device to be supplied on construction so
they can find the machine configuration object. There's a
one-dimensional array helper to make it easier to construct arrays of
device delegates with the same owner. (I didn't make an n-dimensional
one because I didn't hit a use case, but it would be a simple addition.)
There's no more bind_relative_to member - just call resolve() like you
would for a devcb. There's also no need to cast nullptr when creating a
late bind device delegate. The flip side is that for an overloaded or
non-capturing lambda you'll need to cast to the desired type.
There is one less conditional branch in the hot path for calls for
delegates bound to a function pointer of member function pointer. This
comes at the cost of one additional unconditional branch in the hot
path for calls to delegates bound to functoids (lambdas, functions that
don't take an object reference, other callable objects). This applies
to all delegates, not just device delegates.
Address spaces will now print an error message if a late bind error is
encountered while installing a handler. This will give the range and
address range, hopefully making it easier to guess which memory map is
faulty.
For the simple case of allowing a device_delegate member to be
configured, use a member like this:
template <typename... T> void set_foo(T &&...args) { m_foo_cb.set(std::forward<T>(args)...); }
For a case where different delegates need to be used depending on the
function signature, see src/emu/screen.h (the screen update function
setters).
Device delegates now take a target specification and function pointer.
The target may be:
* Target omitted, implying the current device being configured. This
can only be used during configuration. It will work as long as the
current device is not removed/replaced.
* A tag string relative to the current device being configured. This
can only be used during configuration. It will not be callable until
.resolve() is called. It will work as long as the current device is
not removed/replaced.
* A device finder (required_device/optional_device). The delegate will
late bind to the current target of the device finder. It will not
be callable until .resolve() is called. It will work properly if the
target device is replaced, as long as the device finder's base object
isn't removed/replaced.
* A reference to an object. It will be callable immediately. It will
work as long as the target object is not removed/replaced.
The target types and restrictions are pretty similar to what you already
have on object finders and devcb, so it shouldn't cause any surprises.
Note that dereferencing a device finder will changes the effect. To
illustrate this:
...
required_device<some_device> m_dev;
...
m_dev(*this, "dev")
...
// will late bind to "dev" relative to *this
// will work if "dev" hasn't been created yet or is replaced later
// won't work if *this is removed/replaced
// won't be callable until resolve() is called
cb1.set(m_dev, FUNC(some_device::w));
...
// will bind to current target of m_dev
// will not work if m_dev is not resolved
// will not work if "dev" is replaced later
// will be callable immediately
cb2.set(*m_dev, FUNC(some_device::w));
...
The order of the target and name has been reversed for functoids
(lambdas and other callable objects). This allows the NAME macro to
be used on lambdas and functoids. For example:
foo.set_something(NAME([this] (u8 data) { m_something = data; }));
I realise the diagnostic messages get ugly if you use NAME on a large
lambda. You can still give a literal name, you just have to place it
after the lambda rather than before. This is uglier, but it's
intentional. I'm trying to drive developers away from a certain style.
While it's nice that you can put half the driver code in the memory map,
it detracts from readability. It's hard to visualise the memory range
mappings if the memory map functions are punctuated by large lambdas.
There's also slightly higher overhead for calling a delegate bound to a
functoid.
If the code is prettier for trivial lambdas but uglier for non-trivial
lambdas in address maps, it will hopefully steer people away from
putting non-trivial lambdas in memory maps.
There were some devices that were converted from using plain delegates
without adding bind_relative_to calls. I fixed some of them (e.g.
LaserDisc) but I probably missed some. These will likely crash on
unresolved delegate calls.
There are some devices that reset delegates at configuration complete or
start time, preventing them from being set up during configuration (e.g.
src/devices/video/ppu2c0x.cpp and src/devices/machine/68307.cpp). This
goes against the design principles of how device delegates should be
used, but I didn't change them because I don't trust myself to find all
the places they're used.
I've definitely broken some stuff with this (I know about asterix), so
report issues and bear with me until I get it all fixed.
|
| |
|
|
| |
now-superfluous .get() in many drivers/devices (nw)
|
| |
|
|
| |
template on more information (data width, endianness) to make it possible to turn it into an handler cache eventually, and not just a memory block cache. Make it capable of large and unaligned accesses. [O. Galibert]
|
| |
|
|
|
|
| |
* Move around the debugger hooks to get a small but measurable performance increase
* Remove emucore from external tools
* Improve performance of DSP16 interpreter a little by generating six variants of execution loop
|
| | |
|
| |
|
|
|
| |
-------------------------------
Sartorius-Werke GmbH 3733 [Mike McBike, rfka01, Vas Crabb]
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
* direct_read_data is now a template which takes the address bus shift
as a parameter.
* address_space::direct<shift>() is now a template method that takes
the shift as a parameter and returns a pointer instead of a
reference
* the address to give to {read|write}_* on address_space or
direct_read_data is now the address one wants to access
Longer explanation:
Up until now, the {read|write}_* methods required the caller to give
the byte offset instead of the actual address. That's the same on
byte-addressing CPUs, e.g. the ones everyone knows, but it's different
on the word/long/quad addressing ones (tms, sharc, etc...) or the
bit-addressing one (tms340x0). Changing that required templatizing
the direct access interface on the bus addressing granularity,
historically called address bus shift. Also, since everybody was
taking the address of the reference returned by direct(), and
structurally didn't have much choice in the matter, it got changed to
return a pointer directly.
Longest historical explanation:
In a cpu core, the hottest memory access, by far, is the opcode
fetching. It's also an access with very good locality (doesn't move
much, tends to stay in the same rom/ram zone even when jumping around,
tends not to hit handlers), which makes efficient caching worthwhile
(as in, 30-50% faster core iirc on something like the 6502, but that
was 20 years ago and a number of things changed since then). In fact,
opcode fetching was, in the distant past, just an array lookup indexed
by pc on an offset pointer, which was updated on branches. It didn't
stay that way because more elaborate access is often needed (handlers,
banking with instructions crossing a bank...) but it still ends up with
a frontend of "if the address is still in the current range read from
pointer+address otherwise do the slowpath", e.g. two usually correctly
predicted branches plus the read most of the time.
Then the >8 bits cpus arrived. That was ok, it just required to do
the add to a u8 *, then convert to a u16/u32 * and do the read. At
the asm level, it was all identical except for the final read, and
read_byte/word/long being separate there was no test (and associated
overhead) added in the path.
Then the word-addressing CPUs arrived with, iirc, the tms cpus used in
atari games. They require, to read from the pointer, to shift the
address, either explicitely, or implicitely through indexing a u16 *.
There were three possibilities:
1- create a new read_* method for each size and granularity. That
amounts to a lot of copy/paste in the end, and functions with
identical prototypes so the compiler can't detect you're using the
wrong one.
2- put a variable shift in the read path. That was too expensive
especially since the most critical cpus are byte-addressing (68000 at
the time was the key). Having bit-adressing cpus which means the
shift can either be right or left depending on the variable makes
things even worse.
3- require the caller to do the shift himself when needed.
The last solution was chosen, and starting that day the address was a
byte offset and not the real address. Which is, actually, quite
surprising when writing a new cpu core or, worse, when using the
read/write methods from the driver code.
But since then, C++ happened. And, in particular, templates with
non-type parameters. Suddendly, solution 1 can be done without the
copy/paste and with different types allowing to detect (at runtime,
but systematically and at startup) if you got it wrong, while still
generating optimal code. So it was time to switch to that solution
and makes the address parameter sane again. Especially since it makes
mucking in the rest of the memory subsystem code a lot more
understandable.
|
| |
|
|
|
|
|
|
| |
Disassemblers are now independant classes. Not only the code is
cleaner, but unidasm has access to all the cpu cores again. The
interface to the disassembly method has changed from byte buffers to
objects that give a result to read methods. This also adds support
for lfsr and/or paged PCs.
|
| |
|
|
| |
to avoid nested templates everywhere (nw)
|
| |
|
|
| |
bounds/color in layouts
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
| |
* Split ROM and RAM port address spaces
* Split RAM memory and status address spaces (no more read/modify/write)
* Fixed bug in FIN handling
* Exposed cycle callback
* Implemented most of intelc440 front panel
* Added preliminary internal artwork for intlc440
* Re-implmented flicker I/O based on how hardware actually works
* Corrected flicker RAM size
* Hooked up flicker playfield lamp outputs - this really needs PWM
|
| | |
|
| | |
|
| |
|
|
|
|
|
|
|
|
| |
* Implemented front panel mode switches/LEDs and reset switch
* Added skeleton bus for "universal" slots and connected control lines
(nw) Default keyboard mapping is annoying because left shift, Z and X
are used both for typing into the TTY and switching program bank. You're
better off changing the mapping to make it less annoying or using a
socket and talking to it with telnet.
|
| |
|
|
| |
buttons in INTELLEC 4/MOD 40
|
| |
|
|
|
|
| |
* can't use opram when program and opcodes are not related in the slightest
* check for disabled side-effects!
* better reflection of 4289 timings for performing program read/write
|
| |
|
|
|
|
|
|
|
|
|
|
| |
* Make disassembler/debugger use syntax closer to what ASL accepts
* Use 2D lookup to make debugger tables more compact
* Allow 4-bit registers to be set independently
* Save state fixes
* Implement WPM/RPM instructions
* Expose some signals from a 4008/4009 or 4289
* Implement RAM read/write mechanism for INTELLEC 4/MOD 40
- Can test with S and D commands in monitor
* Connect INTELLEC 4/MOD 40 paper tape run output to RTS on RS232 port
|
| | |
|
|
|
* Renamed to MCS-40.
* Emulated 8-clock instruction cycle, interruptible at any point.
* Converted TEST input to an input line.
* Added SYNC and CM output lines.
* Added support for 4040 CY output, logical operations, extended registers, ROM banking and disassembly.
* Made I/O space mapping more flexible to support the variety of peripherals available.
* Notable missing features are 4040 interrupt and halt, and "program memory" space.
|