summaryrefslogtreecommitdiffstatshomepage
diff options
context:
space:
mode:
author Ivan Vangelista <mesgnet@yahoo.it>2024-03-14 19:29:30 +0100
committer Ivan Vangelista <mesgnet@yahoo.it>2024-03-14 19:29:30 +0100
commit99c9e2fff293d99ff56630078a87810287513427 (patch)
treec15dd9af30ca7a5dac9012dbea24ca14a7e21574
parent1e081e3494c9d97f9667b3d1c70f1e6e408bae8d (diff)
alba/albazg.cpp: added dip locations, verified dips for hana6pt2
-rw-r--r--src/mame/alba/albazg.cpp42
1 files changed, 21 insertions, 21 deletions
diff --git a/src/mame/alba/albazg.cpp b/src/mame/alba/albazg.cpp
index 393a6eadf82..31da4abf2e4 100644
--- a/src/mame/alba/albazg.cpp
+++ b/src/mame/alba/albazg.cpp
@@ -20,7 +20,6 @@ TODO:
0x0d to 0x80 when the screen is upside-down)
-You can actually configure the coin chutes / coin lockout active high/low (!), obviously
MAME framework isn't really suitable for it at the current time;
--DIP sheet for Hana Awase 6 Part II is available, needs translation
PCB:
- HD46505SP-2 / HD68B45SP Japan
@@ -317,34 +316,35 @@ static INPUT_PORTS_START( yumefuda )
PORT_BIT( 0x08, IP_ACTIVE_HIGH, IPT_OUTPUT ) PORT_WRITE_LINE_DEVICE_MEMBER("eeprom", eeprom_serial_93cxx_device, clk_write)
PORT_BIT( 0x04, IP_ACTIVE_HIGH, IPT_OUTPUT ) PORT_WRITE_LINE_DEVICE_MEMBER("eeprom", eeprom_serial_93cxx_device, di_write)
- // Unused, on the PCB there's just one bank
+ // Added by translating the manual (both Yumefuda and Hana Awase 6 Part II have the same DIPs)
PORT_START("DSW1")
- PORT_BIT( 0xff, IP_ACTIVE_LOW, IPT_UNUSED )
-
- // Added by translating the manual
- PORT_START("DSW2")
- PORT_DIPNAME( 0x01, 0x01, "Learn Mode" )//SW Dip-Switches
+ PORT_DIPNAME( 0x01, 0x01, "Learn Mode" ) PORT_DIPLOCATION ("DSW1:!8") //SW Dip-Switches
PORT_DIPSETTING( 0x01, DEF_STR( Off ) )
PORT_DIPSETTING( 0x00, DEF_STR( On ) )
- PORT_SERVICE( 0x02, IP_ACTIVE_LOW )
- PORT_DIPNAME( 0x04, 0x04, "Hopper Payout" )
- PORT_DIPSETTING( 0x04, "Hanafuda Type" )//hanaawase
+ PORT_SERVICE( 0x02, IP_ACTIVE_LOW ) PORT_DIPLOCATION ("DSW1:!7")
+ PORT_DIPNAME( 0x04, 0x04, "Hopper Payout" ) PORT_DIPLOCATION ("DSW1:!6")
+ PORT_DIPSETTING( 0x04, "Hanafuda Type" ) //hanaawase
PORT_DIPSETTING( 0x00, "Royal Type" )
- PORT_DIPNAME( 0x08, 0x08, "Panel Type" )
- PORT_DIPSETTING( 0x08, "Hanafuda Panel" )//hanaawase
+ PORT_DIPNAME( 0x08, 0x08, "Panel Type" ) PORT_DIPLOCATION ("DSW1:!5")
+ PORT_DIPSETTING( 0x08, "Hanafuda Panel" ) //hanaawase
PORT_DIPSETTING( 0x00, "Royal Panel" )
- PORT_DIPNAME( 0x10, 0x10, DEF_STR( Unused ) )
+ PORT_DIPNAME( 0x10, 0x10, DEF_STR( Unused ) ) PORT_DIPLOCATION ("DSW1:!4")
PORT_DIPSETTING( 0x10, DEF_STR( Off ) )
PORT_DIPSETTING( 0x00, DEF_STR( On ) )
- PORT_DIPNAME( 0x20, 0x20, DEF_STR( Unused ) )
+ PORT_DIPNAME( 0x20, 0x20, DEF_STR( Unused ) ) PORT_DIPLOCATION ("DSW1:!3")
PORT_DIPSETTING( 0x20, DEF_STR( Off ) )
PORT_DIPSETTING( 0x00, DEF_STR( On ) )
- PORT_DIPNAME( 0x40, 0x40, DEF_STR( Flip_Screen ) )//Screen Orientation
+ PORT_DIPNAME( 0x40, 0x40, DEF_STR( Flip_Screen ) ) PORT_DIPLOCATION ("DSW1:!2") //Screen Orientation
PORT_DIPSETTING( 0x40, DEF_STR( Off ) )
PORT_DIPSETTING( 0x00, DEF_STR( On ) )
- PORT_DIPNAME( 0x80, 0x80, DEF_STR( Cabinet ) )//Screen Flip
+ PORT_DIPNAME( 0x80, 0x80, DEF_STR( Cabinet ) ) PORT_DIPLOCATION ("DSW1:!1") //Screen Flip
PORT_DIPSETTING( 0x80, DEF_STR( Upright ) )
- PORT_DIPSETTING( 0x00, DEF_STR( Cocktail ) )//pressing Flip-Flop button makes the screen flip
+ PORT_DIPSETTING( 0x00, DEF_STR( Cocktail ) ) //pressing Flip-Flop button makes the screen flip
+
+ // Unused, on the PCB there's just one bank
+ PORT_START("DSW2")
+ PORT_BIT( 0xff, IP_ACTIVE_LOW, IPT_UNUSED )
+
INPUT_PORTS_END
/***************************************************************************************/
@@ -405,8 +405,8 @@ void albazg_state::yumefuda(machine_config &config)
SPEAKER(config, "mono").front_center();
ay8910_device &aysnd(AY8910(config, "aysnd", 12_MHz_XTAL / 16)); // guessed to use the same xtal as the crtc
- aysnd.port_a_read_callback().set_ioport("DSW1");
- aysnd.port_b_read_callback().set_ioport("DSW2");
+ aysnd.port_a_read_callback().set_ioport("DSW2");
+ aysnd.port_b_read_callback().set_ioport("DSW1");
aysnd.port_a_write_callback().set(FUNC(albazg_state::output_w));
aysnd.add_route(ALL_OUTPUTS, "mono", 0.50);
}
@@ -429,12 +429,12 @@ ROM_START( yumefuda )
ROM_LOAD("zg1-007.u13", 0x000, 0x104, NO_DUMP ) // PAL
ROM_END
-ROM_START( hana6pt2 )
+ROM_START( hana6pt2 ) // P0-066A PCB
ROM_REGION( 0x10000, "maincpu", 0 ) // code
ROM_LOAD("zg006p11.u42", 0x00000, 0x10000, CRC(4e455ac5) SHA1(df3a327acd2eb8f566ba6b86342d8fb6f7e89560))
// u43 empty on this PCB
- ROM_REGION( 0x10000, "tiles", 0 )
+ ROM_REGION( 0x10000, "tiles", 0 ) // same GFX as Yumefuda
ROM_LOAD("zg001003.u3", 0x0000, 0x4000, CRC(5822ff27) SHA1(d40fa0790de3c912f770ef8f610bd8c42bc3500f))
ROM_LOAD("zg001004.u4", 0x4000, 0x4000, CRC(d8676435) SHA1(9b6df5378948f492717e1a4d9c833ddc5a9e8225))
ROM_LOAD("zg001005.u5", 0x8000, 0x4000, CRC(158b6cde) SHA1(3e335b7dc1bbae2edb02722025180f32ab91f69f))