// license:MAME // copyright-holders:Robbbert /*************************************************************************** Dolphin / Dauphin 2010-04-08 Skeleton driver. 2012-05-20 Fixed keyboard, added notes & speaker [Robbbert] 2013-11-03 Added cassette [Robbbert] Minimal Setup: 0000-00FF ROM "MO" (74S471) 0100-01FF ROM "MONI" (74S471) 0200-02FF RAM (2x 2112) 18 pushbuttons for programming (0-F, ADR, NXT). 4-digit LED display. Other options: 0400-07FF Expansion RAM (8x 2112) 0800-08FF Pulse for operation of an optional EPROM programmer 0C00-0FFF ROM "MONA" (2708) LEDs connected to all Address and Data Lines LEDs connected to WAIT and FLAG lines. Speaker with a LED wired across it. PAUSE switch. RUN/STOP switch. STEP switch. CLOCK switch. Cassette player connected to SENSE and FLAG lines. Keyboard encoder: AY-5-2376 (57 keys) CRT interface: (512 characters on a separate bus) 2114 video ram (one half holds the lower 4 data bits, other half the upper bits) 74LS175 holds the upper bits for the 74LS472 74LS472 Character Generator NOTE: a rom is missing, when the ADR button (- key) is pressed, it causes a freeze in nodebug mode, and a crash in debug mode. To see it, start in debug mode. g 6c. In the emulation, press the minus key. The debugger will stop and you can see an instruction referencing location 0100, which is in the missing rom. Keys: 0-9,A-F hexadecimal numbers UP - (NXT) to enter data and advance to the next address MINUS - (ADR) to change the address to what is shown in the data side Special keys: Hold UP, hold 0, release UP, release 0 - execute program at the current address (i.e. 2xx) Hold UP, hold 1, release UP, release 1 - execute program at address 0C00 (rom MONA) Hold UP, hold 2, release UP, release 2 - play a tune with the keys Hold UP, hold 3, release UP, release 3 - decrement the address by 2 Hold MINUS, hold any hex key, release MINUS, release other key - execute program at the current address-0x100 (i.e. 1xx). If you want to scan through other areas of memory (e.g. the roms), alter the data at address 2F9 (high byte) and 2FA (low byte). How to Use: The red digits are the address, and the orange digits are the data. The address range is 200-2FF (the 2 isn't displayed). To select an address, either press the UP key until you get there, or type the address and press minus. The orange digits show the current data at that address. To alter data, just type it in and press UP. To play the reflexes game, hold UP, press 1, release UP, release 1. The display will show A--0 (or some random number in the last position). Press any odd-numbered key (B is convenient), and read off the reaction time. After a short delay it will show '--' again, this is the signal to react. It doesn't seem to reset the counters each time around. TODO: - Find missing roms - Add optional hardware listed above - Cassette is added, but no idea how to operate it. Thanks to Amigan site for various documents. ****************************************************************************/ #include "emu.h" #include "cpu/s2650/s2650.h" #include "sound/speaker.h" #include "imagedev/cassette.h" #include "sound/wave.h" #include "dolphunk.lh" class dauphin_state : public driver_device { public: dauphin_state(const machine_config &mconfig, device_type type, const char *tag) : driver_device(mconfig, type, tag) , m_maincpu(*this, "maincpu") , m_speaker(*this, "speaker") , m_cass(*this, "cassette") { } DECLARE_READ8_MEMBER(cass_r); DECLARE_WRITE_LINE_MEMBER(cass_w); DECLARE_READ8_MEMBER(port07_r); DECLARE_WRITE8_MEMBER(port00_w); DECLARE_WRITE8_MEMBER(port06_w); TIMER_DEVICE_CALLBACK_MEMBER(dauphin_c); private: UINT8 m_cass_data; UINT8 m_last_key; bool m_cass_state; bool m_cassold; bool m_speaker_state; required_device m_maincpu; required_device m_speaker; required_device m_cass; }; READ8_MEMBER( dauphin_state::cass_r ) { return (m_cass->input() > 0.03) ? 1 : 0; } WRITE_LINE_MEMBER( dauphin_state::cass_w ) { m_cass_state = state; // get flag bit } WRITE8_MEMBER( dauphin_state::port00_w ) { output_set_digit_value(offset, data); } WRITE8_MEMBER( dauphin_state::port06_w ) { m_speaker_state ^=1; m_speaker->level_w(m_speaker_state); } READ8_MEMBER( dauphin_state::port07_r ) { UINT8 keyin, i, data = 0x40; keyin = ioport("X0")->read(); if (keyin != 0xff) for (i = 0; i < 8; i++) if BIT(~keyin, i) data = i | 0xc0; keyin = ioport("X1")->read(); if (keyin != 0xff) for (i = 0; i < 8; i++) if BIT(~keyin, i) data = i | 0xc8; if (data == m_last_key) data &= 0x7f; else m_last_key = data; data |= ioport("X2")->read(); return data; } TIMER_DEVICE_CALLBACK_MEMBER(dauphin_state::dauphin_c) { m_cass_data++; if (m_cass_state != m_cassold) { m_cass_data = 0; m_cassold = m_cass_state; } if (m_cass_state) m_cass->output(BIT(m_cass_data, 1) ? -1.0 : +1.0); // 1000Hz else m_cass->output(BIT(m_cass_data, 0) ? -1.0 : +1.0); // 2000Hz } static ADDRESS_MAP_START( dauphin_mem, AS_PROGRAM, 8, dauphin_state ) ADDRESS_MAP_UNMAP_HIGH AM_RANGE( 0x0000, 0x01ff) AM_ROM AM_RANGE( 0x0200, 0x02ff) AM_RAM AM_RANGE( 0x0c00, 0x0fff) AM_ROM ADDRESS_MAP_END static ADDRESS_MAP_START( dauphin_io, AS_IO, 8, dauphin_state ) ADDRESS_MAP_UNMAP_HIGH AM_RANGE(0x00, 0x03) AM_WRITE(port00_w) // 4-led display AM_RANGE(0x06, 0x06) AM_WRITE(port06_w) // speaker (NOT a keyclick) AM_RANGE(0x07, 0x07) AM_READ(port07_r) // pushbuttons AM_RANGE(S2650_SENSE_PORT, S2650_SENSE_PORT) AM_READ(cass_r) AM_RANGE(0x102, 0x103) AM_NOP // stops error log filling up while using debug ADDRESS_MAP_END /* Input ports */ static INPUT_PORTS_START( dauphin ) PORT_START("X0") PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("0") PORT_CODE(KEYCODE_0) PORT_CHAR('0') PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("1") PORT_CODE(KEYCODE_1) PORT_CHAR('1') PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("2") PORT_CODE(KEYCODE_2) PORT_CHAR('2') PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("3") PORT_CODE(KEYCODE_3) PORT_CHAR('3') PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("4") PORT_CODE(KEYCODE_4) PORT_CHAR('4') PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("5") PORT_CODE(KEYCODE_5) PORT_CHAR('5') PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("6") PORT_CODE(KEYCODE_6) PORT_CHAR('6') PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("7") PORT_CODE(KEYCODE_7) PORT_CHAR('7') PORT_START("X1") PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("8") PORT_CODE(KEYCODE_8) PORT_CHAR('8') PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("9") PORT_CODE(KEYCODE_9) PORT_CHAR('9') PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("A") PORT_CODE(KEYCODE_A) PORT_CHAR('A') PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("B") PORT_CODE(KEYCODE_B) PORT_CHAR('B') PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("C") PORT_CODE(KEYCODE_C) PORT_CHAR('C') PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("D") PORT_CODE(KEYCODE_D) PORT_CHAR('D') PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("E") PORT_CODE(KEYCODE_E) PORT_CHAR('E') PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("F") PORT_CODE(KEYCODE_F) PORT_CHAR('F') PORT_START("X2") PORT_BIT( 0x10, IP_ACTIVE_HIGH, IPT_KEYBOARD ) PORT_NAME("NXT") PORT_CODE(KEYCODE_UP) PORT_CHAR('^') PORT_BIT( 0x20, IP_ACTIVE_HIGH, IPT_KEYBOARD ) PORT_NAME("ADR") PORT_CODE(KEYCODE_MINUS) PORT_CHAR('-') INPUT_PORTS_END static MACHINE_CONFIG_START( dauphin, dauphin_state ) /* basic machine hardware */ MCFG_CPU_ADD("maincpu",S2650, XTAL_1MHz) MCFG_CPU_PROGRAM_MAP(dauphin_mem) MCFG_CPU_IO_MAP(dauphin_io) MCFG_S2650_FLAG_HANDLER(WRITELINE(dauphin_state, cass_w)) /* video hardware */ MCFG_DEFAULT_LAYOUT(layout_dolphunk) /* sound hardware */ MCFG_SPEAKER_STANDARD_MONO("mono") MCFG_SOUND_ADD("speaker", SPEAKER_SOUND, 0) MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 1.00) /* cassette */ MCFG_CASSETTE_ADD( "cassette" ) MCFG_SOUND_WAVE_ADD(WAVE_TAG, "cassette") MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 0.25) MCFG_TIMER_DRIVER_ADD_PERIODIC("dauphin_c", dauphin_state, dauphin_c, attotime::from_hz(4000)) MACHINE_CONFIG_END /* ROM definition */ ROM_START( dauphin ) ROM_REGION( 0x8000, "maincpu", 0 ) ROM_LOAD( "dolphin_mo.rom", 0x0000, 0x0100, CRC(a8811f48) SHA1(233c629dc20fac286c8c1559e461bb0b742a675e) ) // This one is used in winarcadia but it is a bad dump, we use the corrected one above //ROM_LOAD( "dolphin_mo.rom", 0x0000, 0x0100, BAD_DUMP CRC(1ac4ac18) SHA1(62a63de6fcd6cd5fcee930d31c73fe603647f06c) ) ROM_LOAD( "dolphin_moni.rom", 0x0100, 0x0100, NO_DUMP ) //ROM_LOAD_OPTIONAL( "dolphin_mona.rom", 0x0c00, 0x0400, NO_DUMP ) // This rom is a bugfixed and relocated version of the game found on the Amigan site ROM_LOAD_OPTIONAL( "reflexes.bin", 0x0c00, 0x0400, CRC(14a1557d) SHA1(789d10551f1bb3472057901fa3cee0c6bfe220ac) ) // This the original //ROM_LOAD( "reflexes.bin", 0x0c00, 0x0072, CRC(c4bed94b) SHA1(cf525755a1dbce6a4681353be692ddf0346f323b) ) ROM_END /* Driver */ /* YEAR NAME PARENT COMPAT MACHINE INPUT CLASS INIT COMPANY FULLNAME FLAGS */ COMP( 1979, dauphin, 0, 0, dauphin, dauphin, driver_device, 0, "LCD EPFL Stoppani", "Dauphin", 0 )