// license:BSD-3-Clause // copyright-holders:hap /*************************************************************************** Sega UFO Catcher, Z80 type hardware The list underneath is not complete. A # before the name means it's not dumped yet. 1st gen * ? - # UFO Catcher (1985) 2nd gen: * ? - # UFO Catcher DX (1987) - # UFO Catcher DX II (1987) 3rd gen - UFO brd * Z80, 2 Sega 315-5296(I/O), YM3438, NEC uPD71054C - # Dream Town (1990) - New UFO Catcher (1991) (2P) - probably the most popular cabinet of all UFO Catcher series - UFO Catcher Mini (1991) (1P) - # UFO Catcher Sega Sonic (1991) - # School Kids (1993) 4th gen - EX brd * Z80, 2 Sega 315-5296(I/O), 315-5338A, YM3438, NEC uPD71054C, optional NEC uPD7759C - # Dream Palace (1992) - # Dream Kitchen (1994) - # UFO Catcher Excellent (1994) - # UFO A La Carte (1996) - UFO Catcher 21 (1996) (2P) - UFO Catcher 800 (1998) (1P) - # Baby UFO (1998) - # Prize Sensor (1998) More games were released after 2000, assumed to be on more modern hardware. TODO: - add dipswitches - prize sensor for ufo21/ufo800 ***************************************************************************/ #include "emu.h" #include "cpu/z80/z80.h" #include "machine/pit8253.h" #include "machine/315_5296.h" #include "sound/2612intf.h" #include "sound/upd7759.h" // the layouts are very similar to eachother #include "newufo.lh" #include "ufomini.lh" #include "ufo21.lh" #include "ufo800.lh" /* simulation parameters */ // x/y/z cabinet dimensions per player (motor range) #define CABINET_WIDTH 400 #define CABINET_DEPTH 400 #define CABINET_HEIGHT 300 // x/y/z motor speed in hertz #define MOTOR_SPEED 100 // crane size (stepper motor range) // note: UFO board/EX board expects this to be around 350 steps per quarter rotation #define CRANE_SIZE 350 class ufo_state : public driver_device { public: ufo_state(const machine_config &mconfig, device_type type, const char *tag) : driver_device(mconfig, type, tag), m_maincpu(*this, "maincpu"), m_io1(*this, "io1"), m_io2(*this, "io2"), m_upd(*this, "upd") { } required_device m_maincpu; required_device m_io1; required_device m_io2; optional_device m_upd; struct Player { struct Motor { UINT8 running; UINT8 direction; float position; float speed; } motor[4]; } m_player[2]; UINT8 m_stepper; void motor_tick(int p, int m); DECLARE_WRITE_LINE_MEMBER(pit_out0); DECLARE_WRITE_LINE_MEMBER(pit_out1); DECLARE_WRITE_LINE_MEMBER(pit_out2); DECLARE_READ8_MEMBER(crane_limits_r); DECLARE_WRITE8_MEMBER(stepper_w); DECLARE_WRITE8_MEMBER(cp_lamps_w); DECLARE_WRITE8_MEMBER(cp_digits_w); DECLARE_WRITE8_MEMBER(crane_xyz_w); DECLARE_WRITE8_MEMBER(ufo_lamps_w); DECLARE_READ8_MEMBER(ex_crane_limits_r); DECLARE_READ8_MEMBER(ex_crane_open_r); DECLARE_WRITE8_MEMBER(ex_stepper_w); DECLARE_WRITE8_MEMBER(ex_cp_lamps_w); DECLARE_WRITE8_MEMBER(ex_crane_xyz_w); DECLARE_WRITE8_MEMBER(ex_ufo21_lamps_w); DECLARE_WRITE8_MEMBER(ex_ufo800_lamps_w); DECLARE_READ8_MEMBER(ex_upd_busy_r); DECLARE_WRITE8_MEMBER(ex_upd_start_w); virtual void machine_reset() override; virtual void machine_start() override; TIMER_DEVICE_CALLBACK_MEMBER(simulate_xyz); TIMER_DEVICE_CALLBACK_MEMBER(update_info); }; void ufo_state::motor_tick(int p, int m) { float delta = m_player[p].motor[m].speed; if (m_player[p].motor[m].direction) delta = -delta; if (m_player[p].motor[m].running) m_player[p].motor[m].position += delta; if (m_player[p].motor[m].position < 0) m_player[p].motor[m].position = 0; if (m_player[p].motor[m].position > 1) m_player[p].motor[m].position = 1; } TIMER_DEVICE_CALLBACK_MEMBER(ufo_state::simulate_xyz) { for (int p = 0; p < 2; p++) for (int m = 0; m < 3; m++) motor_tick(p, m); } TIMER_DEVICE_CALLBACK_MEMBER(ufo_state::update_info) { // output ufo motor positions // 0 X: 000 = right, 100 = left (player 1) // 1 Y: 000 = front, 100 = back // 2 Z: 000 = up, 100 = down // 3 C: 000 = closed, 100 = open for (int p = 0; p < 2; p++) for (int m = 0; m < 4; m++) output().set_indexed_value("counter", p*4 + m, (UINT8)(m_player[p].motor[m].position * 100)); #if 0 char msg1[0x100] = {0}; char msg2[0x100] = {0}; for (int i = 0; i < 8; i++) { sprintf(msg2, "%02X ", m_io2->debug_peek_output(i)); strcat(msg1, msg2); } popmessage("%s", msg1); #endif } /*************************************************************************** I/O ***************************************************************************/ WRITE_LINE_MEMBER(ufo_state::pit_out0) { // ? } WRITE_LINE_MEMBER(ufo_state::pit_out1) { // NMI? if (state) m_maincpu->set_input_line(INPUT_LINE_NMI, PULSE_LINE); } WRITE_LINE_MEMBER(ufo_state::pit_out2) { // ? } /* generic / UFO board handlers */ /* io1 */ READ8_MEMBER(ufo_state::crane_limits_r) { int p = offset & 1; UINT8 ret = 0x7f; // d0: left limit sw (right for p2) // d1: right limit sw (left for p2) // d2: back limit sw // d3: front limit sw // d4: down limit sw // d5: up limit sw for (int m = 0; m < 3; m++) { ret ^= (m_player[p].motor[m].position >= 1) << (m*2 + 0); ret ^= (m_player[p].motor[m].position <= 0) << (m*2 + 1); } // d6: crane open sensor (reflective sticker on the stepper motor rotation disc) if (m_player[p].motor[3].position >= 0.97f) ret ^= 0x40; // d7: prize sensor (mirror?) ret |= (ioport(p ? "IN2" : "IN1")->read() & 0x80); return ret; } /* io2 */ WRITE8_MEMBER(ufo_state::stepper_w) { for (int p = 0; p < 2; p++) { // The crane stepper motor is set up as a rotating ellipse disc under the crane, // controlled with 4 output bits connected to a Toshiba TB6560AHQ motor driver. // I don't know which bits connect to which pins specifically. // To run it, the game writes a continuous sequence of $5, $9, $a, $6, .. static const UINT8 sequence[4] = { 0x5, 0x9, 0xa, 0x6 }; // d0-d3: p1, d4-d7: p2 UINT8 cur = data >> (p*4) & 0xf; UINT8 prev = m_stepper >> (p*4) & 0xf; for (int i = 0; i < 4; i++) { if (sequence[i] == prev && sequence[(i+1) & 3] == cur) { m_player[p].motor[3].running = 1; motor_tick(p, 3); // change direction after each quarter rotate if (m_player[p].motor[3].position <= 0 || m_player[p].motor[3].position >= 1) m_player[p].motor[3].direction ^= 1; break; } } } m_stepper = data; } WRITE8_MEMBER(ufo_state::cp_lamps_w) { // d0-d3: p1/p2 button lamps // other bits: ? for (int i = 0; i < 4; i++) output().set_lamp_value(i, ~data >> i & 1); } WRITE8_MEMBER(ufo_state::cp_digits_w) { static const UINT8 lut_7448[0x10] = { 0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7c,0x07,0x7f,0x67,0x58,0x4c,0x62,0x69,0x78,0x00 }; // d0-d3: cpanel digit // other bits: ? output().set_digit_value(offset & 1, lut_7448[data & 0xf]); } WRITE8_MEMBER(ufo_state::crane_xyz_w) { int p = offset & 1; // d0: x/z axis (0:x, 1:z + halt x/y) // d1: x/z direction // d2: y direction // d3: x/z running // d4: y running // other bits: ? m_player[p].motor[0].running = (data & 9) == 8; m_player[p].motor[0].direction = data & 2; m_player[p].motor[1].running = (data & 0x11) == 0x10; m_player[p].motor[1].direction = data & 4; m_player[p].motor[2].running = (data & 9) == 9; m_player[p].motor[2].direction = data & 2; } WRITE8_MEMBER(ufo_state::ufo_lamps_w) { // d0-d3: ufo leds (2 bits per player) // 3 sets of two red/green leds, each set is wired to the same control 2 bits // 00 = off, off // 11 = red, red // 01 = green, red // 10 = red, green output().set_lamp_value(10, data & 3); output().set_lamp_value(11, data >> 2 & 3); // d4,d5: ? // d6,d7: coincounters machine().bookkeeping().coin_counter_w(0, data & 0x40); // 100 Y machine().bookkeeping().coin_counter_w(1, data & 0x80); // 500 Y } /* EX board specific handlers */ /* io1 */ READ8_MEMBER(ufo_state::ex_crane_limits_r) { int p = offset & 1; UINT8 ret = 0xf0; // d0: left limit sw (invert) // d1: right limit sw (invert) // d2: back limit sw (invert) // d3: front limit sw (invert) // d4: ? // d5: down limit sw // d6: up limit sw // d7: ? for (int m = 0; m < 3; m++) { int shift = (m*2) + (m == 2); ret ^= (m_player[p].motor[m].position >= 1) << shift; ret ^= (m_player[p].motor[m].position <= 0) << (shift+1); } return ret; } READ8_MEMBER(ufo_state::ex_crane_open_r) { // d0-d3: p1, d4-d7: p2 UINT8 ret = 0xff; for (int p = 0; p < 2; p++) { // d0: crane open sensor if (m_player[p].motor[3].position >= 0.97f) ret ^= (1 << (p*4)); // d1: coincounter is plugged in (ufo800 gives error 14 otherwise) // d2,d3: ? } return ret; } /* io2 */ WRITE8_MEMBER(ufo_state::ex_stepper_w) { // stepper motor sequence is: 6 c 9 3 6 c 9 3.. // which means d0 and d3 are swapped when compared with UFO board hardware stepper_w(space, offset, BITSWAP8(data,4,6,5,7,0,2,1,3)); } WRITE8_MEMBER(ufo_state::ex_cp_lamps_w) { // d0,d1,d4,d5: p1/p2 button lamps for (int i = 0; i < 4; i++) output().set_lamp_value(i, ~data >> ((i&1) + (i&2) * 2) & 1); // d2,d3,d6,d7: p1/p2 coincounters for (int i = 0; i < 4; i++) machine().bookkeeping().coin_counter_w(i, data >> (2 + (i&1) + (i&2) * 2) & 1); } WRITE8_MEMBER(ufo_state::ex_crane_xyz_w) { int p = offset & 1; // more straightforward setup than on UFO board hardware // d0: move left // d1: move right // d2: move back // d3: move front // d4: move down // d5: move up for (int m = 0; m < 3; m++) { int bits = data >> (m*2) & 3; m_player[p].motor[m].running = (bits == 1 || bits == 2) ? 1 : 0; m_player[p].motor[m].direction = bits & 2; } } WRITE8_MEMBER(ufo_state::ex_ufo800_lamps_w) { // d0-d4: 5 red leds on ufo // other bits: ? for (int i = 0; i < 5; i++) output().set_lamp_value(10 + i, data >> i & 1); } /* 315-5338A */ WRITE8_MEMBER(ufo_state::ex_ufo21_lamps_w) { // d0: ? (ufo21 reads from it too, but value is discarded) // d1-d6 are the 6 red leds on each ufo // d7: ? for (int i = 1; i < 7; i++) output().set_lamp_value(10 + offset * 10 + i, data >> i & 1); } WRITE8_MEMBER(ufo_state::ex_upd_start_w) { // d0: upd7759c start sample // other bits: unused? m_upd->start_w(~data & 1); } READ8_MEMBER(ufo_state::ex_upd_busy_r) { // d0: upd7759c busy // other bits: unused? int d0 = m_upd->busy_r() ? 1 : 0; return 0xfe | d0; } /* Memory maps */ static ADDRESS_MAP_START( ufo_map, AS_PROGRAM, 8, ufo_state ) AM_RANGE(0x0000, 0xbfff) AM_ROM AM_RANGE(0xe000, 0xffff) AM_RAM ADDRESS_MAP_END static ADDRESS_MAP_START( ufo_portmap, AS_IO, 8, ufo_state ) ADDRESS_MAP_UNMAP_HIGH ADDRESS_MAP_GLOBAL_MASK(0xff) AM_RANGE(0x00, 0x03) AM_DEVREADWRITE("pit", pit8254_device, read, write) AM_RANGE(0x40, 0x43) AM_DEVREADWRITE("ym", ym3438_device, read, write) AM_RANGE(0x80, 0xbf) AM_DEVREADWRITE("io1", sega_315_5296_device, read, write) AM_RANGE(0xc0, 0xff) AM_DEVREADWRITE("io2", sega_315_5296_device, read, write) ADDRESS_MAP_END static ADDRESS_MAP_START( ex_ufo21_portmap, AS_IO, 8, ufo_state ) AM_RANGE(0x20, 0x20) AM_DEVWRITE("upd", upd7759_device, port_w) AM_RANGE(0x60, 0x60) AM_WRITE(ex_upd_start_w) AM_READNOP AM_RANGE(0x61, 0x61) AM_READ(ex_upd_busy_r) AM_RANGE(0x64, 0x65) AM_WRITE(ex_ufo21_lamps_w) AM_READNOP // AM_RANGE(0x68, 0x68) AM_WRITENOP // ? AM_IMPORT_FROM( ufo_portmap ) ADDRESS_MAP_END static ADDRESS_MAP_START( ex_ufo800_portmap, AS_IO, 8, ufo_state ) // AM_RANGE(0x60, 0x67) AM_NOP // unused? // AM_RANGE(0x68, 0x68) AM_WRITENOP // ? AM_IMPORT_FROM( ufo_portmap ) ADDRESS_MAP_END /*************************************************************************** Inputs ***************************************************************************/ static INPUT_PORTS_START( newufo ) PORT_START("IN1") PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_COIN1 ) PORT_NAME("P1 Coin 1") // 100 Y PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_COIN3 ) PORT_NAME("P1 Coin 2") // 500 Y PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_SERVICE ) PORT_NAME("P1 Test") PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_SERVICE1 ) PORT_NAME("P1 Service Coin") PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_SERVICE3 ) PORT_NAME("P1 Credit Clear") PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_BUTTON1 ) PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_BUTTON2 ) PORT_BIT( 0x80, IP_ACTIVE_HIGH, IPT_BUTTON3 ) PORT_NAME("P1 Prize Sensor") PORT_START("IN2") PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_COIN2 ) PORT_NAME("P2 Coin 1") // 100 Y PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_COIN4 ) PORT_NAME("P2 Coin 2") // 500 Y PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_OTHER ) PORT_NAME("P2 Test") PORT_CODE(KEYCODE_F1) PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_SERVICE2 ) PORT_NAME("P2 Service Coin") PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_SERVICE4 ) PORT_NAME("P2 Credit Clear") PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_BUTTON1 ) PORT_PLAYER(2) PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_BUTTON2 ) PORT_PLAYER(2) PORT_BIT( 0x80, IP_ACTIVE_HIGH, IPT_BUTTON3 ) PORT_PLAYER(2) PORT_NAME("P2 Prize Sensor") PORT_START("DSW1") // coinage PORT_DIPNAME( 0x01, 0x01, "UNK1-01" ) PORT_DIPSETTING( 0x01, DEF_STR( Off ) ) PORT_DIPSETTING( 0x00, DEF_STR( On ) ) PORT_DIPNAME( 0x02, 0x02, "UNK1-02" ) PORT_DIPSETTING( 0x02, DEF_STR( Off ) ) PORT_DIPSETTING( 0x00, DEF_STR( On ) ) PORT_DIPNAME( 0x04, 0x04, "UNK1-04" ) PORT_DIPSETTING( 0x04, DEF_STR( Off ) ) PORT_DIPSETTING( 0x00, DEF_STR( On ) ) PORT_DIPNAME( 0x08, 0x08, "UNK1-08" ) PORT_DIPSETTING( 0x08, DEF_STR( Off ) ) PORT_DIPSETTING( 0x00, DEF_STR( On ) ) PORT_DIPNAME( 0x10, 0x10, "UNK1-10" ) PORT_DIPSETTING( 0x10, DEF_STR( Off ) ) PORT_DIPSETTING( 0x00, DEF_STR( On ) ) PORT_DIPNAME( 0x20, 0x20, "UNK1-20" ) PORT_DIPSETTING( 0x20, DEF_STR( Off ) ) PORT_DIPSETTING( 0x00, DEF_STR( On ) ) PORT_DIPNAME( 0x40, 0x40, "UNK1-40" ) PORT_DIPSETTING( 0x40, DEF_STR( Off ) ) PORT_DIPSETTING( 0x00, DEF_STR( On ) ) PORT_DIPNAME( 0x80, 0x80, "UNK1-80" ) PORT_DIPSETTING( 0x80, DEF_STR( Off ) ) PORT_DIPSETTING( 0x00, DEF_STR( On ) ) PORT_START("DSW2") PORT_DIPNAME( 0x01, 0x01, "UNK2-01 Demo Music Off" ) PORT_DIPSETTING( 0x01, DEF_STR( Off ) ) PORT_DIPSETTING( 0x00, DEF_STR( On ) ) PORT_DIPNAME( 0x02, 0x02, "UNK2-02" ) PORT_DIPSETTING( 0x02, DEF_STR( Off ) ) PORT_DIPSETTING( 0x00, DEF_STR( On ) ) PORT_DIPNAME( 0x04, 0x04, "UNK2-04 Initial Motor Test" ) PORT_DIPSETTING( 0x04, DEF_STR( Off ) ) PORT_DIPSETTING( 0x00, DEF_STR( On ) ) PORT_DIPNAME( 0x08, 0x08, "UNK2-08" ) PORT_DIPSETTING( 0x08, DEF_STR( Off ) ) PORT_DIPSETTING( 0x00, DEF_STR( On ) ) PORT_DIPNAME( 0x10, 0x10, "UNK2-10 Disable Prize Sensor" ) PORT_DIPSETTING( 0x10, DEF_STR( Off ) ) PORT_DIPSETTING( 0x00, DEF_STR( On ) ) PORT_DIPNAME( 0x20, 0x20, "UNK2-20" ) PORT_DIPSETTING( 0x20, DEF_STR( Off ) ) PORT_DIPSETTING( 0x00, DEF_STR( On ) ) PORT_DIPNAME( 0x40, 0x40, "UNK2-40" ) PORT_DIPSETTING( 0x40, DEF_STR( Off ) ) PORT_DIPSETTING( 0x00, DEF_STR( On ) ) PORT_DIPNAME( 0x80, 0x80, "UNK2-80" ) PORT_DIPSETTING( 0x80, DEF_STR( Off ) ) PORT_DIPSETTING( 0x00, DEF_STR( On ) ) INPUT_PORTS_END static INPUT_PORTS_START( ufomini ) PORT_INCLUDE( newufo ) PORT_MODIFY("IN2") PORT_BIT( 0xff, IP_ACTIVE_LOW, IPT_UNUSED ) INPUT_PORTS_END static INPUT_PORTS_START( ufo21 ) PORT_START("IN1") PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_SERVICE ) PORT_NAME("Test Button") PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_SERVICE1 ) PORT_NAME("P1 Service Coin") PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_COIN1 ) PORT_NAME("P1 Coin 1") PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_UNUSED ) PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_UNKNOWN ) PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_SERVICE2 ) PORT_NAME("P2 Service Coin") PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_COIN2 ) PORT_NAME("P2 Coin 1") PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_UNUSED ) PORT_START("IN2") PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_BUTTON1 ) PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_BUTTON2 ) PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_UNKNOWN ) PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_UNKNOWN ) PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_BUTTON1 ) PORT_PLAYER(2) PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_BUTTON2 ) PORT_PLAYER(2) PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_UNKNOWN ) PORT_PLAYER(2) PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_UNKNOWN ) PORT_PLAYER(2) PORT_START("DSW1") // coinage PORT_DIPNAME( 0x01, 0x01, "UNK1-01" ) PORT_DIPSETTING( 0x01, DEF_STR( Off ) ) PORT_DIPSETTING( 0x00, DEF_STR( On ) ) PORT_DIPNAME( 0x02, 0x02, "UNK1-02" ) PORT_DIPSETTING( 0x02, DEF_STR( Off ) ) PORT_DIPSETTING( 0x00, DEF_STR( On ) ) PORT_DIPNAME( 0x04, 0x04, "UNK1-04" ) PORT_DIPSETTING( 0x04, DEF_STR( Off ) ) PORT_DIPSETTING( 0x00, DEF_STR( On ) ) PORT_DIPNAME( 0x08, 0x08, "UNK1-08" ) PORT_DIPSETTING( 0x08, DEF_STR( Off ) ) PORT_DIPSETTING( 0x00, DEF_STR( On ) ) PORT_DIPNAME( 0x10, 0x10, "UNK1-10" ) PORT_DIPSETTING( 0x10, DEF_STR( Off ) ) PORT_DIPSETTING( 0x00, DEF_STR( On ) ) PORT_DIPNAME( 0x20, 0x20, "UNK1-20" ) PORT_DIPSETTING( 0x20, DEF_STR( Off ) ) PORT_DIPSETTING( 0x00, DEF_STR( On ) ) PORT_DIPNAME( 0x40, 0x40, "UNK1-40" ) PORT_DIPSETTING( 0x40, DEF_STR( Off ) ) PORT_DIPSETTING( 0x00, DEF_STR( On ) ) PORT_DIPNAME( 0x80, 0x80, "UNK1-80" ) PORT_DIPSETTING( 0x80, DEF_STR( Off ) ) PORT_DIPSETTING( 0x00, DEF_STR( On ) ) PORT_START("DSW2") PORT_DIPNAME( 0x01, 0x01, "UNK2-01" ) PORT_DIPSETTING( 0x01, DEF_STR( Off ) ) PORT_DIPSETTING( 0x00, DEF_STR( On ) ) PORT_DIPNAME( 0x02, 0x02, "UNK2-02" ) PORT_DIPSETTING( 0x02, DEF_STR( Off ) ) PORT_DIPSETTING( 0x00, DEF_STR( On ) ) PORT_DIPNAME( 0x04, 0x04, "UNK2-04" ) PORT_DIPSETTING( 0x04, DEF_STR( Off ) ) PORT_DIPSETTING( 0x00, DEF_STR( On ) ) PORT_DIPNAME( 0x08, 0x08, "UNK2-08 Demo Music On" ) PORT_DIPSETTING( 0x08, DEF_STR( Off ) ) PORT_DIPSETTING( 0x00, DEF_STR( On ) ) PORT_DIPNAME( 0x10, 0x10, "UNK2-10" ) PORT_DIPSETTING( 0x10, DEF_STR( Off ) ) PORT_DIPSETTING( 0x00, DEF_STR( On ) ) PORT_DIPNAME( 0x20, 0x20, "UNK2-20" ) PORT_DIPSETTING( 0x20, DEF_STR( Off ) ) PORT_DIPSETTING( 0x00, DEF_STR( On ) ) PORT_DIPNAME( 0x40, 0x40, "UNK2-40" ) PORT_DIPSETTING( 0x40, DEF_STR( Off ) ) PORT_DIPSETTING( 0x00, DEF_STR( On ) ) PORT_DIPNAME( 0x80, 0x80, "UNK2-80" ) PORT_DIPSETTING( 0x80, DEF_STR( Off ) ) PORT_DIPSETTING( 0x00, DEF_STR( On ) ) INPUT_PORTS_END static INPUT_PORTS_START( ufo800 ) PORT_START("IN1") PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_SERVICE ) PORT_NAME("Test Button") PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_SERVICE1 ) PORT_NAME("P1 Service Coin") PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_COIN1 ) PORT_NAME("P1 Coin 1") PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_COIN3 ) PORT_NAME("P1 Coin 2") PORT_BIT( 0xf0, IP_ACTIVE_LOW, IPT_UNUSED ) PORT_START("IN2") PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_BUTTON1 ) PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_BUTTON2 ) PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_UNKNOWN ) PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_UNKNOWN ) PORT_BIT( 0xf0, IP_ACTIVE_LOW, IPT_UNUSED ) PORT_START("DSW1") // coinage PORT_DIPNAME( 0x01, 0x01, "UNK1-01" ) PORT_DIPSETTING( 0x01, DEF_STR( Off ) ) PORT_DIPSETTING( 0x00, DEF_STR( On ) ) PORT_DIPNAME( 0x02, 0x02, "UNK1-02" ) PORT_DIPSETTING( 0x02, DEF_STR( Off ) ) PORT_DIPSETTING( 0x00, DEF_STR( On ) ) PORT_DIPNAME( 0x04, 0x04, "UNK1-04" ) PORT_DIPSETTING( 0x04, DEF_STR( Off ) ) PORT_DIPSETTING( 0x00, DEF_STR( On ) ) PORT_DIPNAME( 0x08, 0x08, "UNK1-08" ) PORT_DIPSETTING( 0x08, DEF_STR( Off ) ) PORT_DIPSETTING( 0x00, DEF_STR( On ) ) PORT_DIPNAME( 0x10, 0x10, "UNK1-10" ) PORT_DIPSETTING( 0x10, DEF_STR( Off ) ) PORT_DIPSETTING( 0x00, DEF_STR( On ) ) PORT_DIPNAME( 0x20, 0x20, "UNK1-20" ) PORT_DIPSETTING( 0x20, DEF_STR( Off ) ) PORT_DIPSETTING( 0x00, DEF_STR( On ) ) PORT_DIPNAME( 0x40, 0x40, "UNK1-40" ) PORT_DIPSETTING( 0x40, DEF_STR( Off ) ) PORT_DIPSETTING( 0x00, DEF_STR( On ) ) PORT_DIPNAME( 0x80, 0x80, "UNK1-80" ) PORT_DIPSETTING( 0x80, DEF_STR( Off ) ) PORT_DIPSETTING( 0x00, DEF_STR( On ) ) PORT_START("DSW2") PORT_DIPNAME( 0x01, 0x01, "UNK2-01 BGM Select" ) PORT_DIPSETTING( 0x01, DEF_STR( Off ) ) PORT_DIPSETTING( 0x00, DEF_STR( On ) ) PORT_DIPNAME( 0x02, 0x02, "UNK2-02 BGM Select" ) PORT_DIPSETTING( 0x02, DEF_STR( Off ) ) PORT_DIPSETTING( 0x00, DEF_STR( On ) ) PORT_DIPNAME( 0x04, 0x04, "UNK2-04" ) PORT_DIPSETTING( 0x04, DEF_STR( Off ) ) PORT_DIPSETTING( 0x00, DEF_STR( On ) ) PORT_DIPNAME( 0x08, 0x08, "UNK2-08" ) PORT_DIPSETTING( 0x08, DEF_STR( Off ) ) PORT_DIPSETTING( 0x00, DEF_STR( On ) ) PORT_DIPNAME( 0x10, 0x10, "UNK2-10" ) PORT_DIPSETTING( 0x10, DEF_STR( Off ) ) PORT_DIPSETTING( 0x00, DEF_STR( On ) ) PORT_DIPNAME( 0x20, 0x20, "UNK2-20" ) PORT_DIPSETTING( 0x20, DEF_STR( Off ) ) PORT_DIPSETTING( 0x00, DEF_STR( On ) ) PORT_DIPNAME( 0x40, 0x40, "UNK2-40" ) PORT_DIPSETTING( 0x40, DEF_STR( Off ) ) PORT_DIPSETTING( 0x00, DEF_STR( On ) ) PORT_DIPNAME( 0x80, 0x80, "UNK2-80" ) PORT_DIPSETTING( 0x80, DEF_STR( Off ) ) PORT_DIPSETTING( 0x00, DEF_STR( On ) ) INPUT_PORTS_END /*************************************************************************** Machine Config ***************************************************************************/ void ufo_state::machine_reset() { } void ufo_state::machine_start() { // init/zerofill/register for savestates static const float motor_speeds[4] = { 1.0f/CABINET_WIDTH, 1.0f/CABINET_DEPTH, 1.0f/CABINET_HEIGHT, 1.0f/CRANE_SIZE }; for (int m = 0; m < 4; m++) { for (auto & elem : m_player) { elem.motor[m].running = 0; elem.motor[m].direction = 0; elem.motor[m].position = 0.5; elem.motor[m].speed = motor_speeds[m]; } save_item(NAME(m_player[0].motor[m].running), m); save_item(NAME(m_player[0].motor[m].direction), m); save_item(NAME(m_player[0].motor[m].position), m); save_item(NAME(m_player[1].motor[m].running), m); save_item(NAME(m_player[1].motor[m].direction), m); save_item(NAME(m_player[1].motor[m].position), m); } m_stepper = 0; save_item(NAME(m_stepper)); } static MACHINE_CONFIG_START( newufo, ufo_state ) /* basic machine hardware */ MCFG_CPU_ADD("maincpu", Z80, XTAL_16MHz/2) MCFG_CPU_PROGRAM_MAP(ufo_map) MCFG_CPU_IO_MAP(ufo_portmap) MCFG_TIMER_DRIVER_ADD_PERIODIC("motor_timer", ufo_state, simulate_xyz, attotime::from_hz(MOTOR_SPEED)) MCFG_TIMER_DRIVER_ADD_PERIODIC("update_timer", ufo_state, update_info, attotime::from_hz(60)) MCFG_DEVICE_ADD("io1", SEGA_315_5296, XTAL_16MHz) // all ports set to input MCFG_315_5296_IN_PORTA_CB(READ8(ufo_state, crane_limits_r)) MCFG_315_5296_IN_PORTB_CB(READ8(ufo_state, crane_limits_r)) MCFG_315_5296_IN_PORTE_CB(IOPORT("IN1")) MCFG_315_5296_IN_PORTF_CB(IOPORT("DSW1")) MCFG_315_5296_IN_PORTG_CB(IOPORT("DSW2")) MCFG_315_5296_IN_PORTH_CB(IOPORT("IN2")) MCFG_DEVICE_ADD("io2", SEGA_315_5296, XTAL_16MHz) // all ports set to output MCFG_315_5296_OUT_PORTA_CB(WRITE8(ufo_state, stepper_w)) MCFG_315_5296_OUT_PORTB_CB(WRITE8(ufo_state, cp_lamps_w)) MCFG_315_5296_OUT_PORTC_CB(WRITE8(ufo_state, cp_digits_w)) MCFG_315_5296_OUT_PORTD_CB(WRITE8(ufo_state, cp_digits_w)) MCFG_315_5296_OUT_PORTE_CB(WRITE8(ufo_state, crane_xyz_w)) MCFG_315_5296_OUT_PORTF_CB(WRITE8(ufo_state, crane_xyz_w)) MCFG_315_5296_OUT_PORTG_CB(WRITE8(ufo_state, ufo_lamps_w)) MCFG_DEVICE_ADD("pit", PIT8254, XTAL_16MHz/2) // uPD71054C, configuration is unknown MCFG_PIT8253_CLK0(XTAL_16MHz/2/256) MCFG_PIT8253_OUT0_HANDLER(WRITELINE(ufo_state, pit_out0)) MCFG_PIT8253_CLK1(XTAL_16MHz/2/256) MCFG_PIT8253_OUT1_HANDLER(WRITELINE(ufo_state, pit_out1)) MCFG_PIT8253_CLK2(XTAL_16MHz/2/256) MCFG_PIT8253_OUT2_HANDLER(WRITELINE(ufo_state, pit_out2)) /* no video! */ /* sound hardware */ MCFG_SPEAKER_STANDARD_MONO("mono") MCFG_SOUND_ADD("ym", YM3438, XTAL_16MHz/2) MCFG_YM2612_IRQ_HANDLER(INPUTLINE("maincpu", 0)) MCFG_SOUND_ROUTE(0, "mono", 0.40) MCFG_SOUND_ROUTE(1, "mono", 0.40) MACHINE_CONFIG_END static MACHINE_CONFIG_DERIVED( ufomini, newufo ) /* basic machine hardware */ MCFG_DEVICE_MODIFY("io1") MCFG_315_5296_IN_PORTC_CB(IOPORT("IN1")) MCFG_315_5296_IN_PORTE_CB(NOOP) MCFG_315_5296_IN_PORTH_CB(NOOP) MACHINE_CONFIG_END static MACHINE_CONFIG_DERIVED( ufo21, newufo ) /* basic machine hardware */ MCFG_CPU_MODIFY("maincpu") MCFG_CPU_IO_MAP(ex_ufo21_portmap) MCFG_DEVICE_MODIFY("io1") MCFG_315_5296_IN_PORTA_CB(READ8(ufo_state, ex_crane_limits_r)) MCFG_315_5296_IN_PORTB_CB(READ8(ufo_state, ex_crane_limits_r)) MCFG_315_5296_IN_PORTC_CB(READ8(ufo_state, ex_crane_open_r)) MCFG_DEVICE_MODIFY("io2") MCFG_315_5296_OUT_PORTA_CB(WRITE8(ufo_state, ex_stepper_w)) MCFG_315_5296_OUT_PORTB_CB(WRITE8(ufo_state, ex_cp_lamps_w)) MCFG_315_5296_OUT_PORTE_CB(WRITE8(ufo_state, ex_crane_xyz_w)) MCFG_315_5296_OUT_PORTF_CB(WRITE8(ufo_state, ex_crane_xyz_w)) MCFG_315_5296_OUT_PORTG_CB(NOOP) /* sound hardware */ MCFG_SOUND_ADD("upd", UPD7759, UPD7759_STANDARD_CLOCK) MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 0.75) MACHINE_CONFIG_END static MACHINE_CONFIG_DERIVED( ufo800, newufo ) /* basic machine hardware */ MCFG_CPU_MODIFY("maincpu") MCFG_CPU_IO_MAP(ex_ufo800_portmap) MCFG_DEVICE_MODIFY("io1") MCFG_315_5296_IN_PORTA_CB(READ8(ufo_state, ex_crane_limits_r)) MCFG_315_5296_IN_PORTB_CB(IOPORT("IN2")) MCFG_315_5296_IN_PORTC_CB(READ8(ufo_state, ex_crane_open_r)) MCFG_315_5296_IN_PORTD_CB(IOPORT("IN1")) MCFG_315_5296_IN_PORTE_CB(NOOP) MCFG_315_5296_IN_PORTH_CB(NOOP) MCFG_DEVICE_MODIFY("io2") MCFG_315_5296_OUT_PORTA_CB(WRITE8(ufo_state, ex_stepper_w)) MCFG_315_5296_OUT_PORTB_CB(WRITE8(ufo_state, ex_cp_lamps_w)) MCFG_315_5296_OUT_PORTE_CB(WRITE8(ufo_state, ex_crane_xyz_w)) MCFG_315_5296_OUT_PORTF_CB(WRITE8(ufo_state, ex_ufo800_lamps_w)) MCFG_315_5296_OUT_PORTG_CB(NOOP) MACHINE_CONFIG_END /*************************************************************************** Game drivers ***************************************************************************/ ROM_START( newufo ) ROM_REGION( 0x10000, "maincpu", 0 ) ROM_LOAD( "epr-13896.bin", 0x000000, 0x010000, CRC(ca94be57) SHA1(acb6a22940c5e9ce639c7c30eb3948324b223090) ) ROM_END ROM_START( newufo_sonic ) ROM_REGION( 0x10000, "maincpu", 0 ) ROM_LOAD( "epr-14124.bin", 0x000000, 0x010000, CRC(2bdbad89) SHA1(10de4b266471a68083ec4bc439b301b6587ccfd6) ) ROM_END ROM_START( newufo_nfl ) ROM_REGION( 0x10000, "maincpu", 0 ) ROM_LOAD( "epr-15261.bin", 0x000000, 0x010000, CRC(338c00d3) SHA1(03152956c6f1e4d5a1a11ee49f94a8c5eb550815) ) ROM_END ROM_START( newufo_xmas ) ROM_REGION( 0x10000, "maincpu", 0 ) ROM_LOAD( "epr-15340.bin", 0x000000, 0x010000, CRC(6287c9ac) SHA1(bc6bc84bb432424e1d25e01113e8e331fa64f96f) ) ROM_END ROM_START( ufomini ) ROM_REGION( 0x10000, "maincpu", 0 ) ROM_LOAD( "epr-14355.bin", 0x000000, 0x010000, CRC(fbc969c5) SHA1(4a99dcd36bc48b6472988e0bc679fd61af17359c) ) ROM_END ROM_START( ufo21 ) ROM_REGION( 0x10000, "maincpu", 0 ) ROM_LOAD( "epr-19063a.bin", 0x000000, 0x010000, CRC(2e13e3e9) SHA1(6908f7db79c1a1da4ebc0456afc50ff18f2e8cf3) ) ROM_REGION( 0x40000, "upd", 0 ) ROM_LOAD( "epr-19064.bin", 0x000000, 0x040000, CRC(ab62c1f0) SHA1(8791a88546ae69e710e128ffc2ea6e9b464f0631) ) ROM_END ROM_START( ufo800 ) ROM_REGION( 0x10000, "maincpu", 0 ) ROM_LOAD( "epr-20413a.bin", 0x000000, 0x010000, CRC(36e9da6d) SHA1(8e1dbf8b24bc31be7de28f4d562838c291af7c7b) ) ROM_END GAMEL( 1991, newufo, 0, newufo, newufo, driver_device, 0, ROT0, "Sega", "New UFO Catcher (standard)", MACHINE_MECHANICAL | MACHINE_SUPPORTS_SAVE, layout_newufo ) GAMEL( 1991, newufo_sonic, newufo, newufo, newufo, driver_device, 0, ROT0, "Sega", "New UFO Catcher (Sonic The Hedgehog)", MACHINE_MECHANICAL | MACHINE_SUPPORTS_SAVE, layout_newufo ) GAMEL( 1991, newufo_nfl, newufo, newufo, newufo, driver_device, 0, ROT0, "Sega", "New UFO Catcher (Team NFL)", MACHINE_MECHANICAL | MACHINE_SUPPORTS_SAVE, layout_newufo ) GAMEL( 1991, newufo_xmas, newufo, newufo, newufo, driver_device, 0, ROT0, "Sega", "New UFO Catcher (Christmas season ROM kit)", MACHINE_MECHANICAL | MACHINE_SUPPORTS_SAVE, layout_newufo ) GAMEL( 1991, ufomini, 0, ufomini, ufomini, driver_device, 0, ROT0, "Sega", "UFO Catcher Mini", MACHINE_MECHANICAL | MACHINE_SUPPORTS_SAVE, layout_ufomini ) GAMEL( 1996, ufo21, 0, ufo21, ufo21, driver_device, 0, ROT0, "Sega", "UFO Catcher 21", MACHINE_MECHANICAL | MACHINE_SUPPORTS_SAVE, layout_ufo21 ) GAMEL( 1998, ufo800, 0, ufo800, ufo800, driver_device, 0, ROT0, "Sega", "UFO Catcher 800", MACHINE_MECHANICAL | MACHINE_SUPPORTS_SAVE, layout_ufo800 )