// license:BSD-3-Clause // copyright-holders:David Haywood,Stephane Humbert /*************************************************************************** Sega Mega Drive/Genesis-based bootlegs Games supported: * Aladdin * Mortal Kombat 3 * Super Street Fighter II - The New Challengers * Sunset Riders * Top Shooter Aladdin PCB info ================ CPU Main CPU 68000P10 Work RAM 64kB (62256 x2) Sound CPU Z80B Sound RAM 8kB (76c88-6264 x1) Sound IC YM2612 (identified by pins,code was been erased.Named on board as TA07) Other ICs Microchip PIC16C57 (probably it contains the MD modified bios) Osc 50 MHz There are present 3 flat-pack chips with code erased again and named TA04,TA05,TA06 on board,which i have identified (generically) by looking the PCB as: TA04-Intercommunication and sync generator chip TA05-Input controller TA06-VDP (probably MD clone) Uses 2x D41264 SIL package as video RAM ROMs M3,M4 main program M1,M2 graphics All EPROMs are 27C040 Notes: Dip-switch 8 x1 ------------------------ This ROMset comes from a bootleg PCB.The game is a coin-op conversion of the one developed for the Megadrive console.I cannot know gameplay differences since PCB is faulty. However,hardware is totally different.It seems to be based on Sega Mega Drive hardware with CPU clock increased, and since exists an "unlicensed" porting of the game for this system probably the "producers" are the same. Stephh's notes (based on the game M68000 code and some tests) : 1) Useful addresses - 0xffff88.b = number of credits (range 0x00-0xff but display limited to 9) - 0xff7e3c.b = lives (range 0x30-0x39) - 0xffeffa.b = energy (range 0x00-0x08) - 0xffefe0.w = apples (range 0x30-0x39 * 2 , MSB first) - 0xffefe2.w = jewels (range 0x30-0x39 * 2 , MSB first) - 0xff7e29.b to 0xff7e2e.b = score (range 0x30-0x39 * 6) - MSDigit first - 0xff7e12.b to 0xff7e15.b = ??? (range 0x30-0x33 * 3 + 0x00) - MSDigit first - see below - 0xff7e16.b to 0xff7e19.b = ??? (range 0x30-0x33 * 3 + 0x00) - MSDigit first - see below - 0xff7e21.b = difficulty (range 0x00-0x02) - see below 2) Addresses notes - I can't tell what addresses 0xff7r12.l and 0xff7e16.l are supposed to be designed for : they are written once at the beginning of each level (code at 0x1a9030) but I haven't found when they were read back (I've only played the 2 first levels though as well as the bonus level, but I also watched all demo levels till the end after the games full credits). I guess they were originally designed for bonus lives (additional and first), but no evidence. - 0xff7e21.b affects contents of 0xff7e3c.b, 0xffefe0.w, 0xff7e12.l and 0xff7e16.l : Easy Normal Hard 0xff7e21.b=0x00 0xff7e21.b=0x01 0xff7e21.b=0x02 0xff7e3c.b 0x32 0x31 0x30 0xffefe0.w 0x3035 0x3032 0x3030 0xff7e12.l 0x30313000 0x30313200 0x30313400 0xff7e16.l 0x30303900 0x30313200 0x30313500 3) MCU notes - As I don't know how it is on real hardware, MCU simulation is more a guess than anything; anyway, the game now runs correctly (coins are handled and settings change) - Difficulty Dip Switches are correct (see code at 0x1b2680) - Coinage Dip Switches might be wrong because I don't know what the possible values can be, but setting them the way I did isn't that bad (see code at 0x1b2a50) - It's possible that writes to 0x220000 are in fact a mask for what is read back from 0x330000, but I haven't found any formula (thus the "lame" read/write handlers you may investigate) 4) Controls notes - This game is a one player only game (same as the MegaDrive version); that's why I've "blanked" player 2 inputs which are never read. - I've labelled the buttons the same way as in 'g_aladj' with default options. 5) MegaDrive comparaison ('g_aladj' in HazeMD) - There is no "OPTIONS" menu as the difficulty is handled via the MCU / Dip Switches. Some code has been patched but most is still there (see the texts in the ROM ares); Unfortunately, there seems to be no way to access them (no "service" button). - Even with the same settings (same value for 0xff7e21.b), lives and apples, as well as contents of 0xff7e12.l and 0xff7e16.l are really different) ! Here is the same data as above for 'g_aladj' : Easy Normal Hard 0xff7e21.b=0x00 0xff7e21.b=0x01 0xff7e21.b=0x02 0xff7e3c.b 0x35 0x33 0x32 0xffefe0.w 0x3135 0x3130 0x3035 0xff7e12.l 0x30303600 0x30303800 0x30313000 0xff7e16.l 0x30303300 0x30303600 0x30303900 But what makes the arcade version much harder is how energy is handled : in 'g_aladj', you can be hit 8 times before you lose a life, while in 'aladmdb', you lose a life as soon as you are hit ! This is done via code change at 0x1aee3c and patched code at 0x1afc00 : diff aladmdb.asm g_aladj.asm < 1AEE3C: 4EB9 001A FC00 jsr $1afc00.l > 1AEE3C: 5339 00FF EFFA subq.b #1, $ffeffa.l < 1AFC00: 0C39 0001 00FF F57C cmpi.b #$1, $fff57c.l < 1AFC08: 6700 000A beq $1afc14 < 1AFC0C: 4239 00FF EFFA clr.b $ffeffa.l < 1AFC12: 4E75 rts < 1AFC14: 5339 00FF EFFA subq.b #1, $ffeffa.l < 1AFC1A: 4E75 rts Surprisingly, when you are in "demo mode", player can be again be hit 8 times before losing a life (this is the purpose of the 0xfff57c "flag") ! **************************************************************************** Sunset Riders info ==================== - title raster effect is broken (bug in megadrive code, happens with normal set too) **************************************************************************** Top Shooter PCB info ==================== Sun Mixing board, looks like a hacked up Genesis clone. Original driver by David Haywood Inputs by Mariusz Wojcieszek Top Shooter - (c)1995 - older board, look more like an actual hacked cart system, has an MCU Not Dumped Super Bubble Bobble (a bubble bobble rip-off from Sun Mixing, looks like it may be on this hardware) TOP SHOOTER - Sun Mixing Co. Ltd. 1995 To me it seems like an original cartridge-based arcade board hacked to use an external ROM board and a standard JAMMA connector, but of course, I can be wrong. UPPER BOARD _________________________________________________________ | ___________ ___________ _____ __ | | 74LS245P |U14 Empty | |U12 ROM1 | |IC1| |B| | | 74LS245P |__________| |__________| |___| | | 74LS245P ___________ ___________ _____________ | __| |U13 Empty | |U11 ROM2 | | AT89C51 | | |_ J |__________| |__________| |____________| |_ |_ A ______________________ _____ |_ J |_ M | U10 MC68000P10 | |OSC| |_ P |_ M | Motorola | |_ 2 |_ A |______________________| 74HC00P |_ |_ 74LS245P ______________________ ________ | |_ | U9 Empty | |HM6116L | |_ | | |_______| |_ J |_ |______________________| |_ P |_ 74LS245P TD62oo3AP 74LS373P |_ 3 |_ __________ | |_ 74LS245P |GALv20V8B| | |_ ______ | |_ _____ |DIPS| |_ P | |U24 | |_ 1 | 74LS245P | | TD62oo3AP | | | |_ 97 ____________ _____| |_|_|_|_|_|_|_|_|_|_|_|_|_|_| |_|_|_|_| IC1 = Surface scracthed out, don't know what is it U24 = Surface scratched out, seems like a PROM DIPs = Fixed as: 00001000 ROMs = Toshiba TC574000AD JP2, JP3 and P1 connects both boards, also another on-board connector is used, see notes for the 68K socket for the lower board. LOWER BOARD _________________________________________________________ | ____ ____ | | ___ | I| | I| | | |I| | C| | C| | | |C| | 3| | 2| | | |1| |__| |__| | | |3| |__ | _ _________________________ __| | |_| ||||||||||||||||||||||||| __| | IC14 ---------- SLOT --------- __| | ______________________ __| | | | __| | ___ | 68K (to upper board) | _______ __| | |I| |______________________| |SE-94| __| | |C| |JDDB | _| | |1| _______ |_____| | | |2| |SE-93| IC4 | | |JDDA | | | |_____| ___________ |_ | IC8 |Z8400A PS| | | |_________| | | ______ _________ _________ | | | OSC| | IC11 | | IC7 | | | _____________ |_______| |_______| | | RST | | CN5 CN6 | |___________| |______________________________| IC3 = IC2 = Winbond W24257V IC7 = 6264LD 9440 IC11 = SE-95 JDDC IC12 = Sony CXA1634P IC13 = Sony CXA1145P IC14 = GL358 N16 RST is a reset button. OSC = 53.693175 MHz CN5 and CN6 are 9-pin connectors... serial ports? There are two wires soldered directly to two connectors of the slot, going to the upper board (via P1). The whole upper board is plugged using the 68000 socket, there is no 68K on the lower board. There is an edge connector, but it isn't JAMMA. "HK-986 (KINYO)" is written on the PCB, near the slot. ****************************************************************************/ #include "emu.h" #include "includes/megadriv.h" #include "includes/megadriv_acbl.h" /************************************ Megadrive Bootlegs *************************************/ // smaller ROM region because some bootlegs check for RAM there (used by topshoot and hshavoc) void md_boot_state::md_bootleg_map(address_map &map) { map(0x000000, 0x0fffff).rom(); /* Cartridge Program Rom */ map(0x200000, 0x2023ff).ram(); // tested map(0xa00000, 0xa01fff).rw(this, FUNC(md_boot_state::megadriv_68k_read_z80_ram), FUNC(md_boot_state::megadriv_68k_write_z80_ram)); map(0xa02000, 0xa03fff).w(this, FUNC(md_boot_state::megadriv_68k_write_z80_ram)); map(0xa04000, 0xa04003).rw(this, FUNC(md_boot_state::megadriv_68k_YM2612_read), FUNC(md_boot_state::megadriv_68k_YM2612_write)); map(0xa06000, 0xa06001).w(this, FUNC(md_boot_state::megadriv_68k_z80_bank_write)); map(0xa10000, 0xa1001f).rw(this, FUNC(md_boot_state::megadriv_68k_io_read), FUNC(md_boot_state::megadriv_68k_io_write)); map(0xa11100, 0xa11101).rw(this, FUNC(md_boot_state::megadriv_68k_check_z80_bus), FUNC(md_boot_state::megadriv_68k_req_z80_bus)); map(0xa11200, 0xa11201).w(this, FUNC(md_boot_state::megadriv_68k_req_z80_reset)); map(0xc00000, 0xc0001f).rw(m_vdp, FUNC(sega315_5313_device::vdp_r), FUNC(sega315_5313_device::vdp_w)); map(0xd00000, 0xd0001f).rw(m_vdp, FUNC(sega315_5313_device::vdp_r), FUNC(sega315_5313_device::vdp_w)); map(0xe00000, 0xe0ffff).ram().mirror(0x1f0000).share("megadrive_ram"); } MACHINE_CONFIG_START(md_boot_state::md_bootleg) md_ntsc(config); MCFG_DEVICE_MODIFY("maincpu") MCFG_DEVICE_PROGRAM_MAP(md_bootleg_map) MACHINE_CONFIG_END /************************************* * * Games memory handlers * *************************************/ WRITE16_MEMBER(md_boot_state::aladmdb_w ) { /* Values returned from the log file : - aladmdb_w : 1b2a6c - data = 6600 (each time a coin is inserted) - aladmdb_w : 1b2a82 - data = 0000 (each time a coin is inserted) - aladmdb_w : 1b2d18 - data = aa00 (only once on reset) - aladmdb_w : 1b2d42 - data = 0000 (only once on reset) */ logerror("aladmdb_w : %06x - data = %04x\n",m_maincpu->pc(),data); } READ16_MEMBER(md_boot_state::aladmdb_r ) { if (m_maincpu->pc()==0x1b2a56) { m_aladmdb_mcu_port = ioport("MCU")->read(); if (m_aladmdb_mcu_port & 0x100) return ((m_aladmdb_mcu_port & 0x0f) | 0x100); // coin inserted, calculate the number of coins else return (0x100); //MCU status, needed if you fall into a pitfall } if (m_maincpu->pc()==0x1b2a72) return 0x0000; if (m_maincpu->pc()==0x1b2d24) return (ioport("MCU")->read() & 0x00f0) | 0x1200; // difficulty if (m_maincpu->pc()==0x1b2d4e) return 0x0000; logerror("aladbl_r : %06x\n",m_maincpu->pc()); return 0x0000; } READ16_MEMBER(md_boot_state::mk3mdb_dsw_r ) { static const char *const dswname[3] = { "DSWA", "DSWB", "DSWC" }; return ioport(dswname[offset])->read(); } READ16_MEMBER(md_boot_state::ssf2mdb_dsw_r ) { static const char *const dswname[3] = { "DSWA", "DSWB", "DSWC" }; return ioport(dswname[offset])->read(); } READ16_MEMBER(md_boot_state::srmdb_dsw_r ) { static const char *const dswname[3] = { "DSWA", "DSWB", "DSWC" }; return ioport(dswname[offset])->read(); } READ16_MEMBER(md_boot_state::topshoot_200051_r ) { return -0x5b; } // jzth protection WRITE16_MEMBER(md_boot_state::bl_710000_w) { int pc = m_maincpu->pc(); logerror("%06x writing to bl_710000_w %04x %04x\n", pc, data, mem_mask); // protection value is read from 0x710000 after a series of writes.. and stored at ff0007 // startup /* 059ce0 writing to bl_710000_w ff08 ffff 059d04 writing to bl_710000_w 000a ffff 059d04 writing to bl_710000_w 000b ffff 059d04 writing to bl_710000_w 000c ffff 059d04 writing to bl_710000_w 000f ffff 059d1c writing to bl_710000_w ff09 ffff 059d2a reading from bl_710000_r (wants 0xe) 059ce0 writing to bl_710000_w ff08 ffff 059d04 writing to bl_710000_w 000a ffff 059d04 writing to bl_710000_w 000b ffff 059d04 writing to bl_710000_w 000c ffff 059d04 writing to bl_710000_w 000f ffff 059d1c writing to bl_710000_w ff09 ffff 059d2a reading from bl_710000_r (wants 0xe) */ // before lv stage 3 /* 059ce0 writing to bl_710000_w 0008 ffff 059d04 writing to bl_710000_w 000b ffff 059d04 writing to bl_710000_w 000f ffff 059d1c writing to bl_710000_w ff09 ffff 059d2a reading from bl_710000_r (wants 0x4) */ // start level 3 /* 059ce0 writing to bl_710000_w ff08 ffff 059d04 writing to bl_710000_w 000b ffff 059d04 writing to bl_710000_w 000c ffff 059d04 writing to bl_710000_w 000e ffff 059d1c writing to bl_710000_w ff09 ffff 059d2a reading from bl_710000_r (wants 0x5) // after end sequence 059ce0 writing to bl_710000_w 0008 ffff 059d04 writing to bl_710000_w 000a ffff 059d04 writing to bl_710000_w 000b ffff 059d04 writing to bl_710000_w 000c ffff 059d04 writing to bl_710000_w 000f ffff 059d1c writing to bl_710000_w ff09 ffff 059d2a reading from bl_710000_r (wants 0xe) */ m_protcount++; } READ16_MEMBER(md_boot_state::bl_710000_r) { uint16_t ret; int pc = m_maincpu->pc(); logerror("%06x reading from bl_710000_r\n", pc); if (m_protcount==6) { ret = 0xe; } else if (m_protcount==5) { ret = 0x5; } else if (m_protcount==4) { ret = 0x4; } else ret = 0xf; m_protcount = 0; return ret; } /************************************* * * Game-specific port definitions * *************************************/ /* verified from M68000 code */ INPUT_PORTS_START( ssf2mdb ) PORT_INCLUDE( md_common ) PORT_MODIFY("PAD1") PORT_BIT( 0x0010, IP_ACTIVE_LOW, IPT_BUTTON2 ) PORT_PLAYER(1) PORT_BIT( 0x0020, IP_ACTIVE_LOW, IPT_BUTTON3 ) PORT_PLAYER(1) PORT_BIT( 0x0040, IP_ACTIVE_LOW, IPT_BUTTON1 ) PORT_PLAYER(1) PORT_BIT( 0x0080, IP_ACTIVE_LOW, IPT_START1 ) PORT_MODIFY("PAD2") PORT_BIT( 0x0010, IP_ACTIVE_LOW, IPT_BUTTON2 ) PORT_PLAYER(2) PORT_BIT( 0x0020, IP_ACTIVE_LOW, IPT_BUTTON3 ) PORT_PLAYER(2) PORT_BIT( 0x0040, IP_ACTIVE_LOW, IPT_BUTTON1 ) PORT_PLAYER(2) PORT_BIT( 0x0080, IP_ACTIVE_LOW, IPT_START2 ) PORT_START("EXTRA1") /* Extra buttons for Joypad 1 (6 button + start + mode) NOT READ DIRECTLY */ PORT_BIT( 0x0001, IP_ACTIVE_LOW, IPT_BUTTON6 ) PORT_PLAYER(1) PORT_BIT( 0x0002, IP_ACTIVE_LOW, IPT_BUTTON5 ) PORT_PLAYER(1) PORT_BIT( 0x0004, IP_ACTIVE_LOW, IPT_BUTTON4 ) PORT_PLAYER(1) PORT_BIT( 0x0008, IP_ACTIVE_LOW, IPT_UNUSED ) PORT_START("EXTRA2") /* Extra buttons for Joypad 2 (6 button + start + mode) NOT READ DIRECTLY */ PORT_BIT( 0x0001, IP_ACTIVE_LOW, IPT_BUTTON6 ) PORT_PLAYER(2) PORT_BIT( 0x0002, IP_ACTIVE_LOW, IPT_BUTTON5 ) PORT_PLAYER(2) PORT_BIT( 0x0004, IP_ACTIVE_LOW, IPT_BUTTON4 ) PORT_PLAYER(2) PORT_BIT( 0x0008, IP_ACTIVE_LOW, IPT_UNUSED ) PORT_START("IN0") /* 3rd I/O port */ PORT_BIT( 0x0001, IP_ACTIVE_LOW, IPT_COIN1 ) PORT_BIT( 0x0002, IP_ACTIVE_LOW, IPT_COIN2 ) PORT_START("DSWA") PORT_DIPNAME( 0x07, 0x07, DEF_STR( Coinage ) ) PORT_DIPSETTING( 0x01, DEF_STR( 4C_1C ) ) PORT_DIPSETTING( 0x02, DEF_STR( 3C_1C ) ) PORT_DIPSETTING( 0x03, DEF_STR( 2C_1C ) ) PORT_DIPSETTING( 0x07, DEF_STR( 1C_1C ) ) PORT_DIPSETTING( 0x06, DEF_STR( 1C_2C ) ) PORT_DIPSETTING( 0x05, DEF_STR( 1C_3C ) ) PORT_DIPSETTING( 0x04, DEF_STR( 1C_4C ) ) // PORT_DIPSETTING( 0x00, DEF_STR( 1C_1C ) ) PORT_START("DSWB") PORT_DIPNAME( 0x07, 0x03, DEF_STR( Difficulty ) ) PORT_DIPSETTING( 0x07, "0 (Easiest)" ) PORT_DIPSETTING( 0x06, "1" ) PORT_DIPSETTING( 0x05, "2" ) PORT_DIPSETTING( 0x04, "3" ) PORT_DIPSETTING( 0x03, "4" ) PORT_DIPSETTING( 0x02, "5" ) PORT_DIPSETTING( 0x01, "6" ) PORT_DIPSETTING( 0x00, "7 (Hardest)" ) PORT_START("DSWC") PORT_DIPNAME( 0x0f, 0x0b, "Speed" ) PORT_DIPSETTING( 0x0f, "0 (Slowest)" ) PORT_DIPSETTING( 0x0e, "1" ) PORT_DIPSETTING( 0x0d, "2" ) PORT_DIPSETTING( 0x0c, "3" ) PORT_DIPSETTING( 0x0b, "4" ) PORT_DIPSETTING( 0x0a, "5" ) PORT_DIPSETTING( 0x09, "6" ) PORT_DIPSETTING( 0x08, "7" ) PORT_DIPSETTING( 0x07, "8" ) PORT_DIPSETTING( 0x06, "9" ) PORT_DIPSETTING( 0x05, "10 (Fastest)" ) // PORT_DIPSETTING( 0x04, "10 (Fastest)" ) // PORT_DIPSETTING( 0x03, "10 (Fastest)" ) // PORT_DIPSETTING( 0x02, "10 (Fastest)" ) // PORT_DIPSETTING( 0x01, "10 (Fastest)" ) // PORT_DIPSETTING( 0x00, "10 (Fastest)" ) INPUT_PORTS_END /* verified from M68000 code */ INPUT_PORTS_START( mk3mdb ) PORT_INCLUDE( md_common ) PORT_MODIFY("PAD1") PORT_BIT( 0x0010, IP_ACTIVE_LOW, IPT_BUTTON2 ) PORT_PLAYER(1) PORT_BIT( 0x0020, IP_ACTIVE_LOW, IPT_BUTTON3 ) PORT_PLAYER(1) PORT_BIT( 0x0040, IP_ACTIVE_LOW, IPT_BUTTON1 ) PORT_PLAYER(1) PORT_BIT( 0x0080, IP_ACTIVE_LOW, IPT_START1 ) PORT_MODIFY("PAD2") PORT_BIT( 0x0010, IP_ACTIVE_LOW, IPT_BUTTON2 ) PORT_PLAYER(2) PORT_BIT( 0x0020, IP_ACTIVE_LOW, IPT_BUTTON3 ) PORT_PLAYER(2) PORT_BIT( 0x0040, IP_ACTIVE_LOW, IPT_BUTTON1 ) PORT_PLAYER(2) PORT_BIT( 0x0080, IP_ACTIVE_LOW, IPT_START2 ) PORT_START("EXTRA1") /* Extra buttons for Joypad 1 (6 button + start + mode) NOT READ DIRECTLY */ PORT_BIT( 0x0001, IP_ACTIVE_LOW, IPT_BUTTON6 ) PORT_PLAYER(1) PORT_BIT( 0x0002, IP_ACTIVE_LOW, IPT_BUTTON5 ) PORT_PLAYER(1) PORT_BIT( 0x0004, IP_ACTIVE_LOW, IPT_BUTTON4 ) PORT_PLAYER(1) PORT_BIT( 0x0008, IP_ACTIVE_LOW, IPT_UNUSED ) PORT_START("EXTRA2") /* Extra buttons for Joypad 2 (6 button + start + mode) NOT READ DIRECTLY */ PORT_BIT( 0x0001, IP_ACTIVE_LOW, IPT_BUTTON6 ) PORT_PLAYER(2) PORT_BIT( 0x0002, IP_ACTIVE_LOW, IPT_BUTTON5 ) PORT_PLAYER(2) PORT_BIT( 0x0004, IP_ACTIVE_LOW, IPT_BUTTON4 ) PORT_PLAYER(2) PORT_BIT( 0x0008, IP_ACTIVE_LOW, IPT_UNUSED ) PORT_START("IN0") PORT_BIT( 0x0001, IP_ACTIVE_LOW, IPT_COIN1 ) PORT_BIT( 0x0002, IP_ACTIVE_LOW, IPT_COIN2 ) PORT_START("DSWA") PORT_DIPNAME( 0x07, 0x07, DEF_STR( Coinage ) ) PORT_DIPSETTING( 0x01, DEF_STR( 4C_1C ) ) PORT_DIPSETTING( 0x02, DEF_STR( 3C_1C ) ) PORT_DIPSETTING( 0x03, DEF_STR( 2C_1C ) ) PORT_DIPSETTING( 0x07, DEF_STR( 1C_1C ) ) PORT_DIPSETTING( 0x06, DEF_STR( 1C_2C ) ) PORT_DIPSETTING( 0x05, DEF_STR( 1C_3C ) ) PORT_DIPSETTING( 0x04, DEF_STR( 1C_4C ) ) // PORT_DIPSETTING( 0x00, DEF_STR( 1C_1C ) ) PORT_START("DSWB") PORT_DIPNAME( 0x07, 0x07, DEF_STR( Difficulty ) ) PORT_DIPSETTING( 0x07, DEF_STR( Easiest ) ) PORT_DIPSETTING( 0x06, DEF_STR( Easy ) ) PORT_DIPSETTING( 0x05, DEF_STR( Medium ) ) PORT_DIPSETTING( 0x04, DEF_STR( Hard ) ) PORT_DIPSETTING( 0x03, DEF_STR( Hardest ) ) // PORT_DIPSETTING( 0x02, DEF_STR( Hardest ) ) // PORT_DIPSETTING( 0x01, DEF_STR( Hardest ) ) // PORT_DIPSETTING( 0x00, DEF_STR( Hardest ) ) PORT_DIPUNUSED( 0x08, IP_ACTIVE_HIGH ) PORT_DIPUNUSED( 0x10, IP_ACTIVE_HIGH ) PORT_DIPUNUSED( 0x20, IP_ACTIVE_HIGH ) PORT_DIPNAME( 0x40, 0x40, DEF_STR( Demo_Sounds ) ) PORT_DIPSETTING( 0x00, DEF_STR( Off ) ) PORT_DIPSETTING( 0x40, DEF_STR( On ) ) PORT_DIPNAME( 0x80, 0x80, "Blood" ) PORT_DIPSETTING( 0x00, DEF_STR( Off ) ) PORT_DIPSETTING( 0x80, DEF_STR( On ) ) PORT_START("DSWC") /* not even read in this set */ INPUT_PORTS_END /* verified from M68000 code */ INPUT_PORTS_START( aladmdb ) PORT_INCLUDE( md_common ) PORT_MODIFY("PAD1") /* Joypad 1 (3 button + start) NOT READ DIRECTLY */ PORT_BIT( 0x0010, IP_ACTIVE_LOW, IPT_BUTTON1 ) PORT_PLAYER(1) PORT_NAME("P1 Throw") // a PORT_BIT( 0x0020, IP_ACTIVE_LOW, IPT_BUTTON2 ) PORT_PLAYER(1) PORT_NAME("P1 Sword") // b PORT_BIT( 0x0040, IP_ACTIVE_LOW, IPT_BUTTON3 ) PORT_PLAYER(1) PORT_NAME("P1 Jump") // c PORT_BIT( 0x0080, IP_ACTIVE_LOW, IPT_START1 ) // start PORT_MODIFY("PAD2") /* Joypad 2 (3 button + start) NOT READ DIRECTLY - not used */ PORT_BIT( 0x00ff, IP_ACTIVE_LOW, IPT_UNUSED ) /* As I don't know how it is on real hardware, this is more a guess than anything */ PORT_START("MCU") PORT_DIPNAME( 0x07, 0x01, DEF_STR( Coinage ) ) /* code at 0x1b2a50 - unsure if there are so many settings */ // PORT_DIPSETTING( 0x00, "INVALID" ) /* adds 0 credit */ PORT_DIPSETTING( 0x01, DEF_STR( 1C_1C ) ) PORT_DIPSETTING( 0x02, DEF_STR( 1C_2C ) ) PORT_DIPSETTING( 0x03, DEF_STR( 1C_3C ) ) PORT_DIPSETTING( 0x04, DEF_STR( 1C_4C ) ) PORT_DIPSETTING( 0x05, DEF_STR( 1C_5C ) ) PORT_DIPSETTING( 0x06, DEF_STR( 1C_6C ) ) PORT_DIPSETTING( 0x07, DEF_STR( 1C_7C ) ) // PORT_BIT( 0x0010, IP_ACTIVE_HIGH, IPT_CUSTOM ) /* to avoid it being changed and corrupting Coinage settings */ PORT_DIPNAME( 0x30, 0x00, DEF_STR( Difficulty ) ) /* code at 0x1b2680 */ PORT_DIPSETTING( 0x10, DEF_STR( Easy ) ) /* "PRACTICE" */ PORT_DIPSETTING( 0x00, DEF_STR( Normal ) ) /* "NORMAL" */ PORT_DIPSETTING( 0x20, DEF_STR( Hard ) ) /* "DIFFICULT" */ // PORT_DIPSETTING( 0x30, DEF_STR( Normal ) ) PORT_DIPUNUSED( 0x40, IP_ACTIVE_HIGH ) PORT_DIPUNUSED( 0x80, IP_ACTIVE_HIGH ) PORT_BIT( 0x0100, IP_ACTIVE_HIGH, IPT_COIN1 ) PORT_IMPULSE(1) /* needed to avoid credits getting mad */ INPUT_PORTS_END /* verified from M68000 code */ INPUT_PORTS_START( srmdb ) PORT_INCLUDE( md_common ) PORT_MODIFY("PAD1") PORT_BIT( 0x0010, IP_ACTIVE_LOW, IPT_BUTTON1 ) PORT_PLAYER(1) PORT_NAME("P1 Shoot") // a PORT_BIT( 0x0020, IP_ACTIVE_LOW, IPT_BUTTON2 ) PORT_PLAYER(1) PORT_NAME("P1 Jump") // b PORT_BIT( 0x0040, IP_ACTIVE_LOW, IPT_UNUSED ) // c (duplicate shoot button) PORT_BIT( 0x0080, IP_ACTIVE_LOW, IPT_START1 ) // start PORT_MODIFY("PAD2") PORT_BIT( 0x0010, IP_ACTIVE_LOW, IPT_BUTTON1 ) PORT_PLAYER(2) PORT_NAME("P2 Shoot") // a PORT_BIT( 0x0020, IP_ACTIVE_LOW, IPT_BUTTON2 ) PORT_PLAYER(2) PORT_NAME("P2 Jump") // b PORT_BIT( 0x0040, IP_ACTIVE_LOW, IPT_UNUSED ) // c (duplicate shoot button) PORT_BIT( 0x0080, IP_ACTIVE_LOW, IPT_START2 ) PORT_START("IN0") /* 3rd I/O port */ PORT_BIT( 0x0001, IP_ACTIVE_LOW, IPT_COIN1 ) PORT_BIT( 0x0002, IP_ACTIVE_LOW, IPT_COIN2 ) PORT_START("DSWA") PORT_DIPNAME( 0x07, 0x00, DEF_STR( Coinage ) ) PORT_DIPSETTING( 0x01, DEF_STR( 4C_1C ) ) PORT_DIPSETTING( 0x02, DEF_STR( 3C_1C ) ) PORT_DIPSETTING( 0x03, DEF_STR( 2C_1C ) ) PORT_DIPSETTING( 0x00, DEF_STR( 1C_1C ) ) PORT_DIPSETTING( 0x07, DEF_STR( 1C_2C ) ) PORT_DIPSETTING( 0x06, DEF_STR( 1C_3C ) ) PORT_DIPSETTING( 0x05, DEF_STR( 1C_4C ) ) PORT_DIPSETTING( 0x04, DEF_STR( 1C_5C ) ) PORT_START("DSWB") PORT_DIPNAME( 0x03, 0x03, DEF_STR( Difficulty ) ) PORT_DIPSETTING( 0x03, DEF_STR( Easy ) ) PORT_DIPSETTING( 0x02, DEF_STR( Medium ) ) PORT_DIPSETTING( 0x01, DEF_STR( Hard ) ) PORT_DIPSETTING( 0x00, DEF_STR( Hardest ) ) PORT_START("DSWC") PORT_DIPNAME( 0x03, 0x03, DEF_STR( Lives ) ) PORT_DIPSETTING( 0x03, "3" ) PORT_DIPSETTING( 0x02, "4" ) PORT_DIPSETTING( 0x01, "5" ) PORT_DIPSETTING( 0x00, "6" ) INPUT_PORTS_END static INPUT_PORTS_START( topshoot ) /* Top Shooter Input Ports */ PORT_START("IN0") PORT_BIT( 0x4f, IP_ACTIVE_LOW, IPT_UNKNOWN ) PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_BUTTON2 ) PORT_NAME("Bet") PORT_IMPULSE(1) PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_BUTTON3 ) PORT_NAME("Start") PORT_IMPULSE(1) PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_BUTTON1 ) PORT_NAME("Fire") PORT_IMPULSE(1) PORT_START("IN1") PORT_BIT( 0xe7, IP_ACTIVE_LOW, IPT_UNKNOWN ) PORT_SERVICE_NO_TOGGLE( 0x08, IP_ACTIVE_LOW ) PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_BUTTON4 ) PORT_NAME("Test mode down") PORT_IMPULSE(1) PORT_START("IN2") PORT_BIT( 0xfd, IP_ACTIVE_LOW, IPT_UNKNOWN ) PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_COIN1 ) PORT_IMPULSE(1) PORT_START("IN3") PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_COIN2 ) PORT_IMPULSE(1) PORT_BIT( 0xfe, IP_ACTIVE_LOW, IPT_UNKNOWN ) INPUT_PORTS_END /************************************* * * Machine Configuration * *************************************/ MACHINE_CONFIG_START(md_boot_state::megadrvb) md_ntsc(config); MCFG_MACHINE_START_OVERRIDE(md_boot_state, md_bootleg) MACHINE_CONFIG_END MACHINE_START_MEMBER(md_boot_state, md_6button) { MACHINE_START_CALL_MEMBER(md_bootleg); m_io_pad_6b[0] = ioport("EXTRA1"); m_io_pad_6b[1] = ioport("EXTRA2"); m_io_pad_6b[2] = ioport("IN0"); m_io_pad_6b[3] = ioport("UNK"); // setup timers for 6 button pads for (int i = 0; i < 3; i++) m_io_timeout[i] = machine().scheduler().timer_alloc(timer_expired_delegate(FUNC(md_base_state::io_timeout_timer_callback),this), (void*)(uintptr_t)i); } MACHINE_CONFIG_START(md_boot_state::megadrvb_6b) md_ntsc(config); MCFG_MACHINE_START_OVERRIDE(md_boot_state, md_6button) MACHINE_CONFIG_END /************************************* * * ROM definition(s) * *************************************/ ROM_START( aladmdb ) ROM_REGION( 0x400000, "maincpu", 0 ) /* 68000 Code */ ROM_LOAD16_BYTE( "m1.bin", 0x000001, 0x080000, CRC(5e2671e4) SHA1(54705c7614fc7b5a1065478fa41f51dd1d8045b7) ) ROM_LOAD16_BYTE( "m2.bin", 0x000000, 0x080000, CRC(142a0366) SHA1(6c94aa9936cd11ccda503b52019a6721e64a32f0) ) ROM_LOAD16_BYTE( "m3.bin", 0x100001, 0x080000, CRC(0feeeb19) SHA1(bd567a33077ab9997871d21736066140d50e3d70) ) ROM_LOAD16_BYTE( "m4.bin", 0x100000, 0x080000, CRC(bc712661) SHA1(dfd554d000399e17b4ddc69761e572195ed4e1f0)) ROM_END ROM_START( mk3mdb ) // roms are scrambled, we take care of the address descramble in the ROM load, and the data descramble in the init // this is bootlegged from "Mortal Kombat 3 (4) [!].bin" ROM_REGION( 0x400000, "maincpu", ROMREGION_ERASE00 ) /* 68000 Code */ ROM_LOAD16_BYTE( "1.u1", 0x080001, 0x020000, CRC(0dc01b23) SHA1(f1aa7ac88c8e3deb5a0a065862722e9d27b87b4c) ) ROM_CONTINUE( 0x000001, 0x020000) ROM_CONTINUE( 0x0c0001, 0x020000) ROM_CONTINUE( 0x040001, 0x020000) ROM_LOAD16_BYTE( "2.u3", 0x180001, 0x040000, CRC(50250235) SHA1(9f9e06f26163b92c76397fde43b38b3536bcb637) ) ROM_CONTINUE( 0x100001, 0x040000) ROM_LOAD16_BYTE( "3.u9", 0x280001, 0x040000, CRC(493404c1) SHA1(73f4bd1eeeee3f175f4378ab406a97f94f88880b) ) ROM_CONTINUE( 0x200001, 0x040000) ROM_LOAD16_BYTE( "4.u11",0x380001, 0x040000, CRC(a52156b8) SHA1(0990ef1fb3427a5d3c262e264feb25c1db75ed33) ) ROM_CONTINUE( 0x300001, 0x040000) ROM_LOAD16_BYTE( "6.u2", 0x080000, 0x020000, CRC(9852fd6f) SHA1(348befeca5129c5ea2c142760ec93511f98f23cc) ) ROM_CONTINUE( 0x000000, 0x020000) ROM_CONTINUE( 0x0c0000, 0x020000) ROM_CONTINUE( 0x040000, 0x020000) ROM_LOAD16_BYTE( "5.u4", 0x180000, 0x040000, CRC(ed6a6d13) SHA1(eaab912ee035ece03f7cfceb1b546004399daad5) ) ROM_CONTINUE( 0x100000, 0x040000) ROM_LOAD16_BYTE( "7.u10",0x280000, 0x040000, CRC(a124d8d1) SHA1(d391b130992701d0fae7e827ba314b8368d809de) ) ROM_CONTINUE( 0x200000, 0x040000) ROM_LOAD16_BYTE( "8.u12",0x380000, 0x040000, CRC(8176f7cc) SHA1(375e1e982b97ba709fb160b04f56f6aa2d580104) ) ROM_CONTINUE( 0x300000, 0x040000) ROM_END ROM_START( ssf2mdb ) ROM_REGION( 0x1400000, "maincpu", 0 ) /* 68000 Code */ /* Special Case, custom PCB, linear ROM mapping of 5meg */ ROM_LOAD16_BYTE( "rom_a", 0x000000, 0x200000, CRC(59726521) SHA1(3120bac17f56c01ffb9d3f9e31efa0263e3774af) ) ROM_LOAD16_BYTE( "rom_b", 0x000001, 0x200000, CRC(7dad5540) SHA1(9279068b2218d239fdd557dd959ac70e74853178) ) ROM_LOAD16_BYTE( "rom_c", 0x400000, 0x080000, CRC(deb48624) SHA1(39ffa7de7b808e0b95cb039bb381705d77420933) ) ROM_LOAD16_BYTE( "rom_d", 0x400001, 0x080000, CRC(b99f6a5b) SHA1(adbe28a7522024bc66328ac86fecf9ded3310e8e) ) ROM_END ROM_START( srmdb ) ROM_REGION( 0x400000, "maincpu", 0 ) /* 68000 Code */ ROM_LOAD16_BYTE( "u1", 0x000001, 0x020000, CRC(c59f33bd) SHA1(bd5bce7698a70ea005b79ab34bcdb056872ef980) ) ROM_LOAD16_BYTE( "u2", 0x000000, 0x020000, CRC(9125c054) SHA1(c73bdeb6b11c59d2b5f5968959b02697957ca894) ) ROM_LOAD16_BYTE( "u3", 0x040001, 0x020000, CRC(0fee0fbe) SHA1(001e0fda12707512aad537e533acf28e726e6107) ) ROM_LOAD16_BYTE( "u4", 0x040000, 0x020000, CRC(fc2aed41) SHA1(27eb3957f5ed26ee5276523b1df46fa7eb298e1f)) ROM_END ROM_START( topshoot ) /* Top Shooter (c)1995 Sun Mixing */ ROM_REGION( 0x200000, "maincpu", 0 ) ROM_LOAD16_BYTE( "tc574000ad_u11_2.bin", 0x000000, 0x080000, CRC(b235c4d9) SHA1(fbb308a5f6e769f3277824cb6a3b50c308969ac2) ) ROM_LOAD16_BYTE( "tc574000ad_u12_1.bin", 0x000001, 0x080000, CRC(e826f6ad) SHA1(23ec8bb608f954d3b915f061e7076c0c63b8259e) ) // not hooked up yet ROM_REGION( 0x1000, "mcu", 0 ) ROM_LOAD( "89c51.bin", 0x0000, 0x1000, CRC(595475c8) SHA1(8313819ba06cc92b54f88c1ca9f34be8d1ec94d0) ) ROM_END ROM_START( sonic2mb ) ROM_REGION( 0x400000, "maincpu", 0 ) /* 68000 Code */ ROM_LOAD16_BYTE( "m1", 0x000001, 0x080000, CRC(7b40aa24) SHA1(247882cd1f412366d61aeb4d85bbeefd5f108e1d) ) ROM_LOAD16_BYTE( "m2", 0x000000, 0x080000, CRC(84b3f758) SHA1(19846b9d951db6f78f3e155d33f1b6349fb87f1a) ) ROM_END /************************************* * * Game-specific driver inits * *************************************/ #define ENERGY_CONSOLE_MODE 0 void md_boot_state::init_aladmdb() { /* * Game does a check @ 1afc00 with work RAM fff57c that makes it play like the original console version (i.e. 8 energy hits instead of 2) */ #if ENERGY_CONSOLE_MODE uint16_t *rom = (uint16_t *)memregion("maincpu")->base(); rom[0x1afc08/2] = 0x6600; #endif // 220000 = writes to mcu? 330000 = reads? m_maincpu->space(AS_PROGRAM).install_write_handler(0x220000, 0x220001, write16_delegate(FUNC(md_boot_state::aladmdb_w),this)); m_maincpu->space(AS_PROGRAM).install_read_handler(0x330000, 0x330001, read16_delegate(FUNC(md_boot_state::aladmdb_r),this)); init_megadrij(); } // this should be correct, the areas of the ROM that differ to the original // after this decode look like intentional changes void md_boot_state::init_mk3mdb() { uint8_t *rom = memregion("maincpu")->base(); for (int x = 0x000001; x < 0x100001; x += 2) { if (x & 0x80000) { rom[x] = rom[x] ^ 0xff; rom[x] = bitswap<8>(rom[x], 0,3,2,5,4,6,7,1); } else { rom[x] = rom[x] ^ 0xff; rom[x] = bitswap<8>(rom[x], 4,0,7,1,3,6,2,5); } } for (int x = 0x100001; x < 0x400000; x += 2) { if (x & 0x80000) { rom[x] = rom[x] ^ 0xff; rom[x] = bitswap<8>(rom[x], 2,7,5,4,1,0,3,6); } else { rom[x] = bitswap<8>(rom[x], 6,1,4,2,7,0,3,5); } } // boot vectors don't seem to be valid, so they are patched... rom[0x01] = 0x01; rom[0x00] = 0x00; rom[0x03] = 0x00; rom[0x02] = 0x00; rom[0x05] = 0x00; rom[0x04] = 0x00; rom[0x07] = 0x02; rom[0x06] = 0x10; m_maincpu->space(AS_PROGRAM).install_read_handler(0x770070, 0x770075, read16_delegate(FUNC(md_boot_state::mk3mdb_dsw_r),this)); init_megadriv(); // 6 button game, so overwrite 3 button io handlers m_megadrive_io_read_data_port_ptr = read8_delegate(FUNC(md_base_state::megadrive_io_read_data_port_6button),this); m_megadrive_io_write_data_port_ptr = write16_delegate(FUNC(md_base_state::megadrive_io_write_data_port_6button),this); } void md_boot_state::init_ssf2mdb() { m_maincpu->space(AS_PROGRAM).nop_write(0xA130F0, 0xA130FF); // custom banking is disabled (!) m_maincpu->space(AS_PROGRAM).install_read_bank(0x400000, 0x5fffff, "bank5"); m_maincpu->space(AS_PROGRAM).unmap_write(0x400000, 0x5fffff); membank("bank5")->set_base(memregion( "maincpu" )->base() + 0x400000 ); m_maincpu->space(AS_PROGRAM).install_read_handler(0x770070, 0x770075, read16_delegate(FUNC(md_boot_state::ssf2mdb_dsw_r),this)); init_megadrij(); // 6 button game, so overwrite 3 button io handlers m_megadrive_io_read_data_port_ptr = read8_delegate(FUNC(md_base_state::megadrive_io_read_data_port_6button),this); m_megadrive_io_write_data_port_ptr = write16_delegate(FUNC(md_base_state::megadrive_io_write_data_port_6button),this); } void md_boot_state::init_srmdb() { uint8_t* rom = memregion("maincpu")->base(); for (int x = 0x00001; x < 0x40000; x += 2) { rom[x] = bitswap<8>(rom[x] ^ 0xff, 5,1,6,2,4,3,7,0); } for (int x = 0x40001; x < 0x80000; x += 2) { rom[x] = bitswap<8>(rom[x] ^ 0x00, 2,6,1,5,0,7,3,4); } // boot vectors don't seem to be valid, so they are patched... rom[0x01] = 0x01; rom[0x00] = 0x00; rom[0x03] = 0x00; rom[0x02] = 0x00; rom[0x06] = 0xd2; rom[0x07] = 0x00; m_maincpu->space(AS_PROGRAM).install_read_handler(0x770070, 0x770075, read16_delegate(FUNC(md_boot_state::srmdb_dsw_r),this)); init_megadriv(); } void md_boot_state::init_topshoot() { m_maincpu->space(AS_PROGRAM).install_read_handler(0x200050, 0x200051, read16_delegate(FUNC(md_boot_state::topshoot_200051_r),this)); m_maincpu->space(AS_PROGRAM).install_read_port(0x200042, 0x200043, "IN0"); m_maincpu->space(AS_PROGRAM).install_read_port(0x200044, 0x200045, "IN1"); m_maincpu->space(AS_PROGRAM).install_read_port(0x200046, 0x200047, "IN2"); m_maincpu->space(AS_PROGRAM).install_read_port(0x200048, 0x200049, "IN3"); init_megadriv(); } /************************************* * * Game driver(s) * *************************************/ GAME( 1993, aladmdb, 0, megadrvb, aladmdb, md_boot_state, init_aladmdb, ROT0, "bootleg / Sega", "Aladdin (bootleg of Japanese Megadrive version)", 0) GAME( 1996, mk3mdb, 0, megadrvb_6b, mk3mdb, md_boot_state, init_mk3mdb, ROT0, "bootleg / Midway", "Mortal Kombat 3 (bootleg of Megadrive version)", 0) GAME( 1994, ssf2mdb, 0, megadrvb_6b, ssf2mdb, md_boot_state, init_ssf2mdb, ROT0, "bootleg / Capcom", "Super Street Fighter II - The New Challengers (bootleg of Japanese MegaDrive version)", 0) GAME( 1993, srmdb, 0, megadrvb, srmdb, md_boot_state, init_srmdb, ROT0, "bootleg / Konami", "Sunset Riders (bootleg of Megadrive version)", 0) GAME( 1995, topshoot, 0, md_bootleg, topshoot, md_boot_state, init_topshoot, ROT0, "Sun Mixing", "Top Shooter", 0) GAME( 1993, sonic2mb, 0, megadrvb, aladmdb, md_boot_state, init_aladmdb, ROT0, "bootleg / Sega", "Sonic The Hedgehog 2 (bootleg of Megadrive version)", MACHINE_NOT_WORKING )