// license:BSD-3-Clause // copyright-holders:David Haywood /****************************************************************** Nazionale Elettronica + others (mostly Italian) Gambling games mostly based on H8/3048 + OKI 6295 or similar. . These all use MCUs with internal ROM for their programs, they can't be dumped easily, and thus we can't emulate them at the moment because there is nothing to emulate This driver is just a placeholder for the graphic / sound ROM loading ******************************************************************* --- Hardware Notes --- There are at least 4 variants for this hardware. The first 3 share the same layout, the latest is a complete redesign. --------- The oldest revision (green) is marked "H83048" with the following hardware: (note that @IC2 is unpopulated) CPU: 1x H8/3048 (HD64F3048F16) @IC1 (128KB ROM; 4KB RAM) Sound: 1x OKI 6295 or clones @IC24 1x LM358N dual operational amplifier @IC27 1x TDA2003 audio amplifier @IC26 PLDs: 1x ispLSI2064-80LJ @IC12 Clock: 1x Xtal 30.000 MHz @OSC1 1x Resonator ZTB1000J (1000 kHz) @X1 ROMs: 1x 27C010 or 27C020 (sound) @IC25 2x or 4x 27C040 (graphics) @IC17,18,19,20 RAMs: 2x SRAM 32k x 8 @IC13,14 Connectors: 1x 28x2 edge connector 1x 12 legs connector @CN1 1x 50 legs flat cable connector @CN4 Other: 1x battery @BAT1 1x 12 DIP switches bank @CN2,3 2x trimmer (VOLUME, SPARK) @P1,2 Known games on this hardware revision are: 200x Book Theatre (ver 1.2) 2000.04.12 Capitan Uncino (Ver 1.2) 2001.02 Capitani Coraggiosi (Ver 1.3) --------- A slightly newer revision (green) is marked "H83048" and adds a very small piggyback @IC2 with: Timekeeping: 1x Dallas DS1302 Trickle Charge Timekeeping Chip Clock: 1x Xtal 32.768 A jumper cable connects the piggyback with ICL7673 pin2 @IC31 Automatic battery back-up switch Known games on this hardware revision are: 200x Pin Ups (Ver 1.0 Rev.A) 200x Venezia (Ver 1.0 Rev.A) 2001 Bowling Road (Ver 1.5) - note: SRAMs are 8k x 8 instead of 32k x 8 2001 Europa 2002 (Ver 2.0, set 1) 2001 Europa 2002 (Ver 2.0, set 2) 2001 World Cup (Ver 1.5) - note: SRAMs are 8k x 8 instead of 32k x 8 2001.06 Labyrinth (Versione 1.5) 2001.11 La Perla Nera Gold (Ver 2.0) 2002.01 La Perla Nera (Ver 2.0) --------- A more recent revision (red) is marked "H83048 Rev 1.1" and removes the piggyback putting Timekeeping and Clock (X2) directly on the board. A jumper cable on the solder side connects Timekeeping pin5 to unpopulated IC2 pin11 Known games on this hardware revision are: 2001.08 Labyrinth (Versione 1.5) 2001.08.24 Abacus (Ver 1.0) 2001.11 Bowling Road (Ver 1.4) - note: SRAMs are 8k x 8 instead of 32k x 8 2002 Europa 2002 Space (Ver 3.0) 2002.12 UFO Robot (Ver 1.0 Rev.A) --------- A complete redesign (green) is marked "ND 2001 Rev 1.0" and uses smaller factor SMDs instead of traditional DIP components. CPU: 1x H8/3048 (HD64F3048F16) @IC17 (128KB ROM; 4KB RAM) Sound: 1x OKI 6295 or clones @IC15 1x LM358N dual operational amplifier @IC13 1x TDA2003 audio amplifier @IC8 PLDs: 1x ispLSI2064-80LJ @IC24 Clock: 1x Xtal 30.000 MHz @OSC1 1x Resonator ZTB1000J (1000 kHz) @X1 1x Xtal K0SoF @X2 ROMs: 1x 27C010 (sound) @IC1 2x 27C040 (graphics) @IC7,8 RAMs: 2x SRAM 32k x 8 @IC25,26 Connectors: 1x 28x2 edge connector 1x 12 legs connector @CN2 Other: 1x battery @BAT1 2x trimmer (VOLUME, SPARK) @P1,2 Known games on this hardware revision are: 2001.11 Bowling Road (Ver 1.4) 2001.12 World Cup (Ver 1.4) *******************************************************************/ #include "emu.h" #include "cpu/h8/h83048.h" #include "sound/okim6295.h" #include "emupal.h" #include "screen.h" #include "speaker.h" class itgamble_state : public driver_device { public: itgamble_state(const machine_config &mconfig, device_type type, const char *tag) : driver_device(mconfig, type, tag), m_maincpu(*this, "maincpu"), m_palette(*this, "palette") { } void mnumber(machine_config &config); void itgamble(machine_config &config); private: uint32_t screen_update(screen_device &screen, bitmap_ind16 &bitmap, const rectangle &cliprect); void itgamble_map(address_map &map); // devices required_device m_maincpu; required_device m_palette; // driver_device overrides virtual void machine_reset() override; virtual void video_start() override; }; /************************* * Video Hardware * *************************/ void itgamble_state::video_start() { } uint32_t itgamble_state::screen_update(screen_device &screen, bitmap_ind16 &bitmap, const rectangle &cliprect) { bitmap.fill(m_palette->black_pen()); return 0; } /************************* * Memory map information * *************************/ void itgamble_state::itgamble_map(address_map &map) { map.global_mask(0xffffff); map(0x000000, 0xffffff).rom(); } /************************* * Input ports * *************************/ static INPUT_PORTS_START( itgamble ) PORT_START("IN0") PORT_DIPNAME( 0x0001, 0x0001, DEF_STR( Unknown ) ) PORT_DIPSETTING( 0x0001, DEF_STR( Off ) ) PORT_DIPSETTING( 0x0000, DEF_STR( On ) ) PORT_DIPNAME( 0x0002, 0x0002, DEF_STR( Unknown ) ) PORT_DIPSETTING( 0x0002, DEF_STR( Off ) ) PORT_DIPSETTING( 0x0000, DEF_STR( On ) ) PORT_DIPNAME( 0x0004, 0x0004, DEF_STR( Unknown ) ) PORT_DIPSETTING( 0x0004, DEF_STR( Off ) ) PORT_DIPSETTING( 0x0000, DEF_STR( On ) ) PORT_DIPNAME( 0x0008, 0x0008, DEF_STR( Unknown ) ) PORT_DIPSETTING( 0x0008, DEF_STR( Off ) ) PORT_DIPSETTING( 0x0000, DEF_STR( On ) ) PORT_DIPNAME( 0x0010, 0x0010, DEF_STR( Unknown ) ) PORT_DIPSETTING( 0x0010, DEF_STR( Off ) ) PORT_DIPSETTING( 0x0000, DEF_STR( On ) ) PORT_DIPNAME( 0x0020, 0x0020, DEF_STR( Unknown ) ) PORT_DIPSETTING( 0x0020, DEF_STR( Off ) ) PORT_DIPSETTING( 0x0000, DEF_STR( On ) ) PORT_DIPNAME( 0x0040, 0x0040, DEF_STR( Unknown ) ) PORT_DIPSETTING( 0x0040, DEF_STR( Off ) ) PORT_DIPSETTING( 0x0000, DEF_STR( On ) ) PORT_DIPNAME( 0x0080, 0x0080, DEF_STR( Unknown ) ) PORT_DIPSETTING( 0x0080, DEF_STR( Off ) ) PORT_DIPSETTING( 0x0000, DEF_STR( On ) ) PORT_DIPNAME( 0x0100, 0x0100, DEF_STR( Unknown ) ) PORT_DIPSETTING( 0x0100, DEF_STR( Off ) ) PORT_DIPSETTING( 0x0000, DEF_STR( On ) ) PORT_DIPNAME( 0x0200, 0x0200, DEF_STR( Unknown ) ) PORT_DIPSETTING( 0x0200, DEF_STR( Off ) ) PORT_DIPSETTING( 0x0000, DEF_STR( On ) ) PORT_DIPNAME( 0x0400, 0x0400, DEF_STR( Unknown ) ) PORT_DIPSETTING( 0x0400, DEF_STR( Off ) ) PORT_DIPSETTING( 0x0000, DEF_STR( On ) ) PORT_DIPNAME( 0x0800, 0x0800, DEF_STR( Unknown ) ) PORT_DIPSETTING( 0x0800, DEF_STR( Off ) ) PORT_DIPSETTING( 0x0000, DEF_STR( On ) ) PORT_DIPNAME( 0x1000, 0x1000, DEF_STR( Unknown ) ) PORT_DIPSETTING( 0x1000, DEF_STR( Off ) ) PORT_DIPSETTING( 0x0000, DEF_STR( On ) ) PORT_DIPNAME( 0x2000, 0x2000, DEF_STR( Unknown ) ) PORT_DIPSETTING( 0x2000, DEF_STR( Off ) ) PORT_DIPSETTING( 0x0000, DEF_STR( On ) ) PORT_DIPNAME( 0x4000, 0x4000, DEF_STR( Unknown ) ) PORT_DIPSETTING( 0x4000, DEF_STR( Off ) ) PORT_DIPSETTING( 0x0000, DEF_STR( On ) ) PORT_DIPNAME( 0x8000, 0x8000, DEF_STR( Unknown ) ) PORT_DIPSETTING( 0x8000, DEF_STR( Off ) ) PORT_DIPSETTING( 0x0000, DEF_STR( On ) ) INPUT_PORTS_END /************************* * Graphics Layouts * *************************/ static const gfx_layout gfxlayout_8x8x8 = { 8,8, RGN_FRAC(1,1), 8, { 0, 1, 2, 3, 4, 5, 6, 7 }, { 0*8, 1*8, 2*8, 3*8, 4*8, 5*8, 6*8, 7*8 }, { 0*64, 1*64, 2*64, 3*64, 4*64, 5*64, 6*64, 7*64 }, 8*64 }; /****************************** * Graphics Decode Information * ******************************/ static GFXDECODE_START( gfx_itgamble ) GFXDECODE_ENTRY( "gfx1", 0, gfxlayout_8x8x8, 0, 16 ) GFXDECODE_END /************************** * Machine Reset * **************************/ void itgamble_state::machine_reset() { /* stop the CPU, we have no code for it anyway */ m_maincpu->set_input_line(INPUT_LINE_HALT, ASSERT_LINE); } /************************** * Machine Drivers * **************************/ void itgamble_state::itgamble(machine_config &config) { /* basic machine hardware */ H83048(config, m_maincpu, 30_MHz_XTAL / 2 ); m_maincpu->set_addrmap(AS_PROGRAM, &itgamble_state::itgamble_map); /* video hardware */ screen_device &screen(SCREEN(config, "screen", SCREEN_TYPE_RASTER)); screen.set_refresh_hz(60); screen.set_vblank_time(ATTOSECONDS_IN_USEC(0)); screen.set_screen_update(FUNC(itgamble_state::screen_update)); screen.set_size(512, 256); screen.set_visarea(0, 512-1, 0, 256-1); screen.set_palette(m_palette); GFXDECODE(config, "gfxdecode", m_palette, gfx_itgamble); PALETTE(config, m_palette).set_entries(0x200); /* sound hardware */ SPEAKER(config, "mono").front_center(); okim6295_device &oki(OKIM6295(config, "oki", 1_MHz_XTAL, okim6295_device::PIN7_HIGH)); /* 1MHz resonator */ oki.add_route(ALL_OUTPUTS, "mono", 1.0); } void itgamble_state::mnumber(machine_config &config) { itgamble(config); m_maincpu->set_clock(24_MHz_XTAL / 2); /* probably the wrong CPU */ subdevice("oki")->set_clock(16_MHz_XTAL / 16); /* clock frequency & pin 7 not verified */ } /************************* * Rom Load * *************************/ /* Book Theatre (ver 1.2) PCB is marked: "CE H83048" on component side PCB is marked: "H83048 bottom" on solder side PCB is labeled: "BOOK THEATER Vers. 1.2" on component side */ ROM_START( bookthr ) ROM_REGION( 0x1000000, "maincpu", 0 ) ROM_LOAD( "bookthr_ver1.2_hd64f3048f16.mcu", 0x00000, 0x4000, NO_DUMP ) ROM_REGION( 0x100000, "gfx1", 0 ) //bigger than 8bpps? ROM_LOAD( "2.ic18", 0x000000, 0x80000, CRC(39433a74) SHA1(088944bfb43b4f239f22d0d2213efd19cea7db30) ) ROM_LOAD( "3.ic17", 0x080000, 0x80000, CRC(893abdcc) SHA1(4dd28fd46bec8be5549d679d31c771888fcb1286) ) ROM_REGION( 0x40000, "oki", 0 ) /* M6295 samples */ ROM_LOAD( "1.ic25", 0x00000, 0x40000, CRC(4fe79e43) SHA1(7c154cb00e9b64fbdcc218280f2183b816cef20b) ) //same as Abacus ROM_END /* Capitan Uncino (Ver 1.2) PCB is marked: "CE H83048" on component side PCB is marked: "ET5" and "H83048 bottom" on solder side PCB is labeled: "Capitan Uncino Vers. 1.3" and " PASSED 12/04/00" on component side -- PCB is labeled Ver 1.3, while EPROMs are labeled Ver 1.2 */ ROM_START( capunc ) ROM_REGION( 0x1000000, "maincpu", 0 ) ROM_LOAD( "capunc.ver1.2.mcu", 0x00000, 0x4000, NO_DUMP ) ROM_REGION( 0x100000, "gfx1", 0 ) ROM_LOAD( "2.ver.1.2.ic18", 0x000000, 0x80000, CRC(5030f7eb) SHA1(106b61c84e3647b8d68d6c30ee7e63ec2df1f5fd) ) ROM_LOAD( "3.ver.1.2.ic17", 0x080000, 0x80000, CRC(2b50e312) SHA1(dc901540a5e1a25fe6e7deb58b0fe01f116aaf63) ) ROM_REGION( 0x40000, "oki", 0 ) /* M6295 samples */ ROM_LOAD( "1.ic25", 0x00000, 0x40000, CRC(4fe79e43) SHA1(7c154cb00e9b64fbdcc218280f2183b816cef20b) ) ROM_END /* Capitani Coraggiosi (Ver 1.3) PCB is marked: "CE H83048" on component side PCB is marked: "H83048 bottom" on solder side PCB is labeled: "Capitani Coraggiosi Vers. 1.3" and "PASSED 02/2001" on component side */ ROM_START( capcor ) ROM_REGION( 0x1000000, "maincpu", 0 ) ROM_LOAD( "capcor.ver1.3.mcu", 0x00000, 0x4000, NO_DUMP ) ROM_REGION( 0x100000, "gfx1", 0 ) ROM_LOAD( "2.ic18", 0x000000, 0x80000, CRC(342bea85) SHA1(885080a9b55d64f9a93e3d5e31e6b13f272bdb93) ) ROM_LOAD( "3.ic17", 0x080000, 0x80000, CRC(ac530eff) SHA1(7c3a6e322311a1cd93801639a0498d5947fb14f2) ) ROM_REGION( 0x40000, "oki", 0 ) /* M6295 samples */ ROM_LOAD( "1.ic25", 0x00000, 0x40000, CRC(4fe79e43) SHA1(7c154cb00e9b64fbdcc218280f2183b816cef20b) ) ROM_END /* Bowling Road (Ver 1.5) PCB is marked: "CE H83048" on component side PCB is marked: "H83048 bottom" on solder side PCB is labeled: "Bowling Road Ver. 1.5" on component side */ ROM_START( bowlroad ) ROM_REGION( 0x1000000, "maincpu", 0 ) ROM_LOAD( "bowlroad_ver1.5_hd64f3048f16.mcu", 0x00000, 0x4000, NO_DUMP ) ROM_REGION( 0x100000, "gfx1", 0 ) //bigger than 8bpps? ROM_LOAD( "bowling road 2.ic18", 0x000000, 0x80000, CRC(bc389c0a) SHA1(26f29820cce7b984c212a44842551b2960d371ae) ) ROM_LOAD( "bowling road 3.ic17", 0x080000, 0x80000, CRC(8a306a4c) SHA1(d94e2c266fb80343028da3dabe25a35b933d9e8e) ) ROM_REGION( 0x40000, "oki", 0 ) /* M6295 samples */ ROM_LOAD( "1.ic25", 0x00000, 0x20000, CRC(e6a0854b) SHA1(394e01bb24abd1e0d2c447b4d620fc5d02257d8a) ) ROM_END /* Europa 2002 (Ver 2.0, set 1) PCB is marked: "CE H83048" on component side PCB is marked: "H83048 bottom" on solder side PCB is labeled: "EUROPA 2002 Versione 2_0" and "Non rimuovere PASSED 11/2001 Garanzia 6 MESI" on component side */ ROM_START( euro2k2 ) ROM_REGION( 0x1000000, "maincpu", 0 ) ROM_LOAD( "euro2k2_ver2.0_hd64f3048f16.mcu", 0x00000, 0x4000, NO_DUMP ) ROM_REGION( 0x180000, "gfx1", 0 ) ROM_LOAD( "4a.ic18", 0x000000, 0x80000, CRC(5decae2d) SHA1(d918aad0e2a1249b18677833f743c92fb678050a) ) ROM_LOAD( "5a.ic17", 0x080000, 0x80000, CRC(8f1bbbf3) SHA1(5efcf77674f8737fc1b98881acebacb26b10adc1) ) ROM_LOAD( "2a.ic20", 0x100000, 0x40000, CRC(f9bffb07) SHA1(efba175189d99a4548739a72f8a1f03c2782a3d0) ) ROM_LOAD( "3a.ic19", 0x140000, 0x40000, CRC(8b29cd56) SHA1(8a09e307271bceef6e9f863153d0f7a9bc6dc6bd) ) ROM_REGION( 0x40000, "oki", 0 ) /* M6295 samples */ ROM_LOAD( "1.ic25", 0x00000, 0x40000, CRC(b9b1aff0) SHA1(35622d7d099a10e5c6bcae152fded1f50692f740) ) ROM_END /* Europa 2002 (Ver 2.0, set 2) PCB is marked: "CE H83048" on component side PCB is marked: "H83048 bottom" on solder side PCB is labeled: "EUROPA 2002 Versione 2_0" and "PASSED 10/2001" on component side */ ROM_START( euro2k2a ) ROM_REGION( 0x1000000, "maincpu", 0 ) ROM_LOAD( "euro2k2a_ver2.0_hd64f3048f16.mcu", 0x00000, 0x4000, NO_DUMP ) ROM_REGION( 0x1c0000, "gfx1", 0 ) ROM_LOAD( "4a.ic18", 0x000000, 0x80000, CRC(5decae2d) SHA1(d918aad0e2a1249b18677833f743c92fb678050a) ) ROM_LOAD( "5a.ic17", 0x080000, 0x80000, CRC(8f1bbbf3) SHA1(5efcf77674f8737fc1b98881acebacb26b10adc1) ) ROM_LOAD( "2a.ic20", 0x100000, 0x40000, CRC(f9bffb07) SHA1(efba175189d99a4548739a72f8a1f03c2782a3d0) ) ROM_LOAD( "3a.ic19", 0x140000, 0x80000, CRC(56c8a73d) SHA1(49b44e5604cd8675d8f9770e5fb68dad4394e11d) ) /* identical halves */ // sldh ROM_REGION( 0x40000, "oki", 0 ) /* M6295 samples */ ROM_LOAD( "1.ic25", 0x00000, 0x40000, CRC(4fe79e43) SHA1(7c154cb00e9b64fbdcc218280f2183b816cef20b) ) // sldh ROM_END /* Labyrinth (Ver 1.5) PCB is marked: "CE H83048" on component side PCB is marked: "H83048 bottom" on solder side PCB is labeled: "LABYRINTH Versione 1.5" on component side */ ROM_START( labrinth ) ROM_REGION( 0x1000000, "maincpu", 0 ) ROM_LOAD( "labyrinth_ver1.5_hd64f3048f16.mcu", 0x00000, 0x4000, NO_DUMP ) ROM_REGION( 0x100000, "gfx1", 0 ) ROM_LOAD( "labyrinth_2.ic18", 0x000000, 0x80000, CRC(2e29606c) SHA1(29a47b05556278cdea6b35414abed5b26dcfff9b) ) ROM_LOAD( "labyrinth_3.ic17", 0x080000, 0x80000, CRC(8b5e7556) SHA1(3e8e3b2724930349e3ca121fb5f61fac0dac9fa1) ) ROM_REGION( 0x40000, "oki", 0 ) /* M6295 samples */ ROM_LOAD( "1.ic25", 0x00000, 0x40000, CRC(4fe79e43) SHA1(7c154cb00e9b64fbdcc218280f2183b816cef20b) ) ROM_END /* La Perla Nera (Ver 2.0) PCB is marked: "CE H83048" on component side PCB is marked: "H83048 bottom" on solder side PCB is labeled: "LA PERLA NERA Versione 2.0" and "Non Rimuovere PASSED 01/2002 garanzia 6 MESI" on component side */ ROM_START( laperla ) ROM_REGION( 0x1000000, "maincpu", 0 ) ROM_LOAD( "laperla_ver2.0_hd64f3048f16.mcu", 0x00000, 0x4000, NO_DUMP ) ROM_REGION( 0x100000, "gfx1", 0 ) ROM_LOAD( "2jolly.ic18", 0x000000, 0x80000, CRC(7bf3d5f2) SHA1(f3a51dd642358a20f6324f28fdf458e8ceaca7a1) ) ROM_LOAD( "3jolly.ic17", 0x080000, 0x80000, CRC(c3a8d9a0) SHA1(cc95c56ebc6137e11c82ed17be7c9f83ed7b6cfc) ) ROM_REGION( 0x40000, "oki", 0 ) /* M6295 samples */ ROM_LOAD( "1.ic25", 0x00000, 0x40000, CRC(4fe79e43) SHA1(7c154cb00e9b64fbdcc218280f2183b816cef20b) ) ROM_END /* La Perla Nera Gold (Ver 2.0) PCB is marked: "CE H83048" on component side PCB is marked: "H83048 bottom" on solder side PCB is labeled: "LA PERLA NERA GOLD Versione 2.0" and "Non Rimuovere PASSED 11/2001 garanzia 6 MESI" on component side */ ROM_START( laperlag ) ROM_REGION( 0x1000000, "maincpu", 0 ) ROM_LOAD( "laperlag_ver2.0_hd64f3048f16.mcu", 0x00000, 0x4000, NO_DUMP ) ROM_REGION( 0x100000, "gfx1", 0 ) ROM_LOAD( "ic18-laperlaneragold2.bin", 0x000000, 0x80000, CRC(ae37de44) SHA1(089f97678fa39aee1885d7c63c4bc7c88e7fe553) ) ROM_LOAD( "ic17-laperlaneragold3.bin", 0x080000, 0x80000, CRC(86da6d11) SHA1(e6b7f9ccbf2e91a60fdf38067ec7ac7e73dea8cd) ) ROM_REGION( 0x40000, "oki", 0 ) /* M6295 samples */ ROM_LOAD( "ic25-uno.bin", 0x00000, 0x20000, CRC(e6a0854b) SHA1(394e01bb24abd1e0d2c447b4d620fc5d02257d8a) ) ROM_END /* Pin Ups (Ver 1.0 Rev A) PCB is marked: "CE H83048" on component side PCB is marked: "H83048 bottom" on solder side PCB is labeled: "PIN UPS VER.1.0 REV.A" on component side */ ROM_START( pinups ) ROM_REGION( 0x1000000, "maincpu", 0 ) ROM_LOAD( "pinups_ver1.0_rev_a_hd64f3048f16.mcu", 0x00000, 0x4000, NO_DUMP ) ROM_REGION( 0x200000, "gfx1", 0 ) ROM_LOAD( "pin_ups_4.ic18", 0x000000, 0x80000, CRC(e1996e31) SHA1(5da10a0d6443410558ec1a2cfbae62ac83d85c78) ) // FIXED BITS (xxxxxxx0) ROM_LOAD( "pin_ups_5.ic17", 0x080000, 0x80000, CRC(1ac8bdb0) SHA1(9475135a13ffc7c4855b7749debbaad7800a3239) ) ROM_LOAD( "pin_ups_2-a.ic20", 0x100000, 0x80000, CRC(f106709d) SHA1(cd925059480dcda031d770db7e955f053aebb6fa) ) ROM_LOAD( "pin_ups_3-a.ic19", 0x180000, 0x80000, CRC(e2e13670) SHA1(96b6a90d8f841990f9e66ebc3b26146f8f6ee5e8) ) ROM_REGION( 0x40000, "oki", 0 ) /* M6295 samples */ ROM_LOAD( "1-a.ic25", 0x00000, 0x40000, CRC(55b73599) SHA1(20a19668392267a1cf5e148f8a9bf5970852698c) ) // 1ST AND 2ND HALF IDENTICAL, if split matches euro2k2s and uforobot ROM_END /* World Cup (Ver 1.5) PCB is marked: "CE H83048" on component side PCB is marked: "H83048 bottom" on solder side PCB is labeled: "WORLD CUP Versione 1.5" on component side --- It is the same game as World Cup (Ver 1.4) but with less RAM */ ROM_START( wcup ) ROM_REGION( 0x1000000, "maincpu", 0 ) ROM_LOAD( "wcup_ver1.5_hd64f3048f16.mcu", 0x00000, 0x4000, NO_DUMP ) ROM_REGION( 0x100000, "gfx1", 0 ) //bigger than 8bpps? ROM_LOAD( "world cup 2.ic18", 0x000000, 0x80000, CRC(4524445b) SHA1(50ec31ac9e4cd807fd4bf3d667644ed662681782) ) ROM_LOAD( "world cup 3.ic17", 0x080000, 0x80000, CRC(0df1af40) SHA1(f5050533e5a9cf2113e5aeffaeca23c7572cafae) ) ROM_REGION( 0x40000, "oki", 0 ) /* M6295 samples */ ROM_LOAD( "1.ic25", 0x00000, 0x20000, CRC(e6a0854b) SHA1(394e01bb24abd1e0d2c447b4d620fc5d02257d8a) ) // same as laperlag ROM_END /* Abacus (Ver 1.0) PCB is marked: "CE H83048" on component side PCB is marked: "bottom" and "H83048 Rev. 1.1" on solder side PCB is labeled: "ABACUS Vers. 1.0" and "FR 24.08.01" on component side */ ROM_START( abacus ) ROM_REGION( 0x1000000, "maincpu", 0 ) ROM_LOAD( "abacus_ver1.0_hd64f3048f16.mcu", 0x00000, 0x4000, NO_DUMP ) ROM_REGION( 0x100000, "gfx1", 0 ) //bigger than 8bpps? ROM_LOAD( "abacus2.ic18", 0x000000, 0x80000, CRC(9884ee09) SHA1(85875dbcd6821c8173457df0216145b4208d5c06) ) ROM_LOAD( "abacus3.ic17", 0x080000, 0x80000, CRC(ec6473c4) SHA1(49980b94ccf77fbfdaa151fccaeb3c2ddad3c119) ) ROM_REGION( 0x40000, "oki", 0 ) /* M6295 samples */ ROM_LOAD( "1.ic25", 0x00000, 0x40000, CRC(4fe79e43) SHA1(7c154cb00e9b64fbdcc218280f2183b816cef20b) ) ROM_END /* Bowling Road (Ver 1.4) PCB is marked: "CE H83048" on component side PCB is marked: "bottom" and "H83048 Rev. 1.1" on solder side PCB is labeled: "Bowling Road Ver. 1.4" and "Non Rimuovere PASSED 11/2001 Garanzia 6 MESI" on component side */ ROM_START( bowlroad14 ) ROM_REGION( 0x1000000, "maincpu", 0 ) ROM_LOAD( "bowlroad_ver1.5_hd64f3048f16.mcu", 0x00000, 0x4000, NO_DUMP ) ROM_REGION( 0x100000, "gfx1", 0 ) //bigger than 8bpps? ROM_LOAD( "bowling road 2.ic18", 0x000000, 0x80000, CRC(ee3756ea) SHA1(9f77f4ebb9f5991ee9aa54a0f7e5d1159a0e53ce) ) // sldh ROM_LOAD( "bowling road 3.ic17", 0x080000, 0x80000, CRC(fec5ad64) SHA1(b0178313fac8e2f118a8c3752ee55456a638e015) ) // sldh ROM_REGION( 0x40000, "oki", 0 ) /* M6295 samples */ ROM_LOAD( "1.ic25", 0x00000, 0x40000, CRC(4fe79e43) SHA1(7c154cb00e9b64fbdcc218280f2183b816cef20b) ) ROM_END /* Europa 2002 Space (Ver 3.0) PCB is marked: "CE H83048" on component side PCB is marked: "bottom" and "H83048 Rev. 1.1" on solder side PCB is labeled: "EUROPA 2002 SPACE Ver. 3.0" and "Non rimuovere PASSED 04/2002 Garanzia 6 MESI" on component side */ ROM_START( euro2k2s ) ROM_REGION( 0x1000000, "maincpu", 0 ) ROM_LOAD( "euro2k2s_ver3.0_hd64f3048f16.mcu", 0x00000, 0x4000, NO_DUMP ) ROM_REGION( 0x180000, "gfx1", 0 ) ROM_LOAD( "europa2002space4.ic18", 0x000000, 0x80000, CRC(cf4db4f1) SHA1(6c03e54e30eb83778d1cad5ade17c26a370ea8a3) ) ROM_LOAD( "europa2002space5.ic17", 0x080000, 0x80000, CRC(1070b4ac) SHA1(3492de52cd0c784479d2774f6050b24cf4591484) ) ROM_LOAD( "europa2002_2-a.ic20", 0x100000, 0x40000, CRC(971bc33b) SHA1(c385e5bef57cdb52a86c1e38fca471ef5ab3da7c) ) ROM_LOAD( "europa2002space3.ic19", 0x140000, 0x40000, CRC(d82dba04) SHA1(63d407dd036d3c7f190ad7b6d694288e9a9e56d0) ) /* identical halves */ ROM_REGION( 0x40000, "oki", 0 ) /* M6295 samples */ ROM_LOAD( "1-a.ic25", 0x00000, 0x20000, CRC(8fcb283d) SHA1(9e95c72967da13606eed6d16f84145273b9ffddf) ) ROM_END /* UFO Robot (Ver 1.0 Rev A) PCB is marked: "CE H83048" on component side PCB is marked: "22-01 bottom" and "H83048 Rev. 1.1" on solder side PCB is labeled: "UFO ROBOT Ver. 1.0 Rev.A" and " Non Rimuovere PASSED 12/2002 Garanzia 6 MESI" on component side */ ROM_START( uforobot ) ROM_REGION( 0x1000000, "maincpu", 0 ) ROM_LOAD( "uforobot_ver1.0_rev_a_hd64f3048f16.mcu", 0x00000, 0x4000, NO_DUMP ) ROM_REGION( 0x200000, "gfx1", 0 ) ROM_LOAD( "ufo_robot_4-a.ic18", 0x000000, 0x80000, CRC(dbd03bfc) SHA1(8d5a721869f95ee075cf3ee7743ee1b9ea9626dc) ) // FIXED BITS (xxxxxxx0) ROM_LOAD( "ufo_robot_5-a.ic17", 0x080000, 0x80000, CRC(72ebd037) SHA1(4f133bba88dacda6a1e1d8b1469e76aae7b2db15) ) ROM_LOAD( "ufo_robot_2-a.ic20", 0x100000, 0x80000, CRC(c2d3fc8f) SHA1(12dd6c77f403fcaa5331ca6f8d02fd60f223b453) ) ROM_LOAD( "ufo_robot_3-a.ic19", 0x180000, 0x80000, CRC(4991101b) SHA1(a8943fa6986799b9b039c4208301a003333cc49a) ) ROM_REGION( 0x40000, "oki", 0 ) /* M6295 samples */ ROM_LOAD( "uno-a.ic25", 0x00000, 0x20000, CRC(8fcb283d) SHA1(9e95c72967da13606eed6d16f84145273b9ffddf) ) ROM_END /* Bowling Road (Ver 1.4) (new hardware) PCB is marked: "CE ND2001" on component side PCB is marked: "ND2001 Rev. 1.0" and "bottom" on solder side PCB is labeled: "Bowling Road Ver. 1.4" and "Non Rimuovere PASSED 11/2001 Garanzia 6 MESI" on component side --- GFX ROMs are the same as Bowling Road (Ver 1.5) but ICs location are numbered differently due to a different PCB layout. Oki ROM is different. */ ROM_START( bowlroad14n ) ROM_REGION( 0x1000000, "maincpu", 0 ) ROM_LOAD( "bowlroad_ver1.4_nh_hd64f3048f16.mcu", 0x00000, 0x4000, NO_DUMP ) ROM_REGION( 0x100000, "gfx1", 0 ) //bigger than 8bpps? ROM_LOAD( "bowling road 2.ic7", 0x000000, 0x80000, CRC(bc389c0a) SHA1(26f29820cce7b984c212a44842551b2960d371ae) ) ROM_LOAD( "bowling road 3.ic6", 0x080000, 0x80000, CRC(8a306a4c) SHA1(d94e2c266fb80343028da3dabe25a35b933d9e8e) ) ROM_REGION( 0x40000, "oki", 0 ) /* M6295 samples */ ROM_LOAD( "uno.ic25", 0x00000, 0x20000, CRC(e6a0854b) SHA1(394e01bb24abd1e0d2c447b4d620fc5d02257d8a) ) ROM_END /* World Cup (Ver 1.4) PCB is marked: "CE ND2001" on component side PCB is marked: "ND2001 Rev. 1.0" and "bottom" on solder side PCB is labeled: "WORLD CUP Versione 1.4" and "Non Rimuovere PASSED 12/2001 Garanzia 6 MESI" on component side --- It is the same game as World Cup (Ver 1.5) but ICs location are numbered differently due to a different PCB layout */ ROM_START( wcup14 ) ROM_REGION( 0x1000000, "maincpu", 0 ) ROM_LOAD( "wcup_ver1.4_hd64f3048f16.mcu", 0x00000, 0x4000, NO_DUMP ) ROM_REGION( 0x100000, "gfx1", 0 ) //bigger than 8bpps? ROM_LOAD( "world cup 2.ic18", 0x000000, 0x80000, CRC(4524445b) SHA1(50ec31ac9e4cd807fd4bf3d667644ed662681782) ) ROM_LOAD( "world cup 3.ic17", 0x080000, 0x80000, CRC(0df1af40) SHA1(f5050533e5a9cf2113e5aeffaeca23c7572cafae) ) ROM_REGION( 0x40000, "oki", 0 ) /* M6295 samples */ ROM_LOAD( "1.ic25", 0x00000, 0x20000, CRC(e6a0854b) SHA1(394e01bb24abd1e0d2c447b4d620fc5d02257d8a) ) ROM_END /********** DIFFERENT HARDWARE **********/ /* Mystery Number CPU: 1x HD64F3048F16 (main)(u2) 3x XC9572 (u29,u33,u34) 1x M6295 (u5)(sound) 1x oscillator 24.000 MHz. 1x oscillator 16.000 MHz. ROMs: 4x M27C4001 (1,2,3,4)(main) 1x AM27C020 (5)(sound) Note: 1x JAMMA edge connector 1x 8 legs jumper (jp1) 1x battery 1x 8x2 DIP switches 1x trimmer (volume) */ ROM_START( mnumber ) /* clocks should be changed for this game */ ROM_REGION( 0x1000000, "maincpu", 0 ) ROM_LOAD( "mnumber_hd64f3048f16.mcu", 0x00000, 0x4000, NO_DUMP ) ROM_REGION( 0x200000, "gfx1", 0 ) /* different encoded gfx */ ROM_LOAD( "mysterynumber3.u20", 0x000000, 0x80000, CRC(251f1e11) SHA1(e8c90b289e76cea6a541b701859be6465a381668) ) ROM_LOAD( "mysterynumber4.u21", 0x080000, 0x80000, CRC(2b8744e4) SHA1(8a12c6f300818de3738e7c44c7df71c432cb9975) ) ROM_LOAD( "mysterynumber1.u22", 0x100000, 0x80000, CRC(d2ce1f61) SHA1(8f30407050fc102191747996258d4b5da3a0d994) ) ROM_LOAD( "mysterynumber2.u19", 0x180000, 0x80000, CRC(7b3a3b32) SHA1(9db46aa12077a48951056705491da1cce747c374) ) /* identical halves */ ROM_REGION( 0x40000, "oki", 0 ) /* M6295 samples */ ROM_LOAD( "mysterynumber5.u6", 0x00000, 0x40000, CRC(80aba466) SHA1(e9bf7e1c3d1c6b1b0dba43dd79a71f89e63df814) ) ROM_END /************************* * Game Drivers * *************************/ // YEAR NAME PARENT MACHINE INPUT STATE INIT ROT COMPANY FULLNAME FLAGS /* hardware green H83048*/ GAME( 200?, bookthr, 0, itgamble, itgamble, itgamble_state, empty_init, ROT0, "Nazionale Elettronica", "Book Theatre (Ver 1.2)", MACHINE_IS_SKELETON ) GAME( 2000, capunc, 0, itgamble, itgamble, itgamble_state, empty_init, ROT0, "Nazionale Elettronica", "Capitan Uncino (Nazionale Elettronica, Ver 1.2)", MACHINE_IS_SKELETON ) GAME( 2001, capcor, 0, itgamble, itgamble, itgamble_state, empty_init, ROT0, "Nazionale Elettronica", "Capitani Coraggiosi (Ver 1.3)", MACHINE_IS_SKELETON ) /* hardware green H83048 + piggyback for timekeeping*/ GAME( 2001, bowlroad, 0, itgamble, itgamble, itgamble_state, empty_init, ROT0, "Nazionale Elettronica", "Bowling Road (Ver 1.5)", MACHINE_IS_SKELETON ) GAME( 2001, euro2k2, 0, itgamble, itgamble, itgamble_state, empty_init, ROT0, "Nazionale Elettronica", "Europa 2002 (Ver 2.0, set 1)", MACHINE_IS_SKELETON ) GAME( 2001, euro2k2a, euro2k2, itgamble, itgamble, itgamble_state, empty_init, ROT0, "Nazionale Elettronica", "Europa 2002 (Ver 2.0, set 2)", MACHINE_IS_SKELETON ) GAME( 2001, labrinth, 0, itgamble, itgamble, itgamble_state, empty_init, ROT0, "Nazionale Elettronica", "Labyrinth (Ver 1.5)", MACHINE_IS_SKELETON ) GAME( 2002, laperla, 0, itgamble, itgamble, itgamble_state, empty_init, ROT0, "Nazionale Elettronica", "La Perla Nera (Ver 2.0)", MACHINE_IS_SKELETON ) GAME( 2001, laperlag, 0, itgamble, itgamble, itgamble_state, empty_init, ROT0, "Nazionale Elettronica", "La Perla Nera Gold (Ver 2.0)", MACHINE_IS_SKELETON ) GAME( 200?, pinups, 0, itgamble, itgamble, itgamble_state, empty_init, ROT0, "Nazionale Elettronica", "Pin Ups (Ver 1.0 Rev A)", MACHINE_IS_SKELETON ) GAME( 2001, wcup, 0, itgamble, itgamble, itgamble_state, empty_init, ROT0, "Nazionale Elettronica", "World Cup (Ver 1.5)", MACHINE_IS_SKELETON ) /* hardware red H83048 Rev 1.1 + timekeeping on board*/ GAME( 2001, abacus, 0, itgamble, itgamble, itgamble_state, empty_init, ROT0, "Nazionale Elettronica", "Abacus (Ver 1.0)", MACHINE_IS_SKELETON ) GAME( 2001, bowlroad14, bowlroad, itgamble, itgamble, itgamble_state, empty_init, ROT0, "Nazionale Elettronica", "Bowling Road (Ver 1.4)", MACHINE_IS_SKELETON ) GAME( 2002, euro2k2s, euro2k2, itgamble, itgamble, itgamble_state, empty_init, ROT0, "Nazionale Elettronica", "Europa 2002 Space (Ver 3.0)", MACHINE_IS_SKELETON ) GAME( 2001, uforobot, 0, itgamble, itgamble, itgamble_state, empty_init, ROT0, "Nazionale Elettronica", "UFO Robot (Ver 1.0 Rev A)", MACHINE_IS_SKELETON ) /* hardware green ND2001 Rev 1.0*/ GAME( 2001, bowlroad14n, bowlroad, itgamble, itgamble, itgamble_state, empty_init, ROT0, "Nazionale Elettronica", "Bowling Road (Ver 1.4, ND2001 hardware)", MACHINE_IS_SKELETON ) GAME( 2001, wcup14, wcup, itgamble, itgamble, itgamble_state, empty_init, ROT0, "Nazionale Elettronica", "World Cup (Ver 1.4)", MACHINE_IS_SKELETON ) /* different hardware */ GAME( 2000, mnumber, 0, mnumber, itgamble, itgamble_state, empty_init, ROT0, "MM / BRL Bologna", "Mystery Number", MACHINE_IS_SKELETON )