// license:BSD-3-Clause // copyright-holders:Nigel Barnes /*************************************************************************** Intel SBC 80/30 Single Board Computer System Initialization (Reset): The USART clock is initially set at 9600 baud. Two "U" characters are used to check for baud rate. When the first "U" character is entered it is checked for 9600, 4800, 2400, and 1200 baud rate. If a match is found then that baud rate is set into the clock. If not, then a second "U" character must be entered. The second "U" character is checked for 600, 300, 150, and 110 baud. When the baud rate has been successfully determined, the sign -on message "80/30 MONITOR" will be displayed on the console. When the monitor is ready for a command, it will prompt with a period ".". Download the User Manual to get the operating procedures. Monitor Commands: D Display memory command G Program execute command N Single step command I Insert instruction into memory M Move memory command R Read hexadecimal file S Substitute memory command W Write hexadecimal file X Examine and modify CPU registers ****************************************************************************/ #include "emu.h" #include "cpu/i8085/i8085.h" #include "machine/pic8259.h" #include "machine/pit8253.h" #include "machine/i8255.h" #include "machine/i8251.h" #include "machine/clock.h" #include "bus/rs232/rs232.h" #define I8259A_TAG "pic8259" #define I8253_TAG "pit8253" #define I8255A_TAG "ppi8255" #define I8251A_TAG "usart" #define I8251A_BAUD_TAG "usart_baud" #define RS232_TAG "rs232" class isbc8030_state : public driver_device { public: isbc8030_state(const machine_config &mconfig, device_type type, const char *tag) : driver_device(mconfig, type, tag) , m_maincpu(*this, "maincpu") , m_usart(*this, I8251A_TAG) , m_ppi(*this, I8255A_TAG) , m_pic(*this, I8259A_TAG) , m_pit(*this, I8253_TAG) , m_rs232(*this, RS232_TAG) , m_usart_baud_rate(*this, I8251A_BAUD_TAG) , m_usart_divide_counter(0) , m_usart_clock_state(0) { } DECLARE_WRITE_LINE_MEMBER( usart_clock_tick ); DECLARE_WRITE_LINE_MEMBER( isbc8030_tmr2_w ); private: required_device m_maincpu; required_device m_usart; required_device m_ppi; required_device m_pic; required_device m_pit; required_device m_rs232; required_ioport m_usart_baud_rate; UINT8 m_usart_divide_counter; UINT8 m_usart_clock_state; }; static ADDRESS_MAP_START(isbc8030_mem, AS_PROGRAM, 8, isbc8030_state) ADDRESS_MAP_UNMAP_HIGH AM_RANGE(0x0000, 0x1fff) AM_ROM AM_RANGE(0x2000, 0xffff) AM_RAM ADDRESS_MAP_END static ADDRESS_MAP_START(isbc8030_io, AS_IO, 8, isbc8030_state) ADDRESS_MAP_UNMAP_HIGH ADDRESS_MAP_GLOBAL_MASK(0xff) AM_RANGE(0xd8, 0xd9) AM_DEVREADWRITE(I8259A_TAG, pic8259_device, read, write) AM_RANGE(0xdc, 0xdf) AM_DEVREADWRITE(I8253_TAG, pit8253_device, read, write) AM_RANGE(0xe8, 0xeb) AM_DEVREADWRITE(I8255A_TAG, i8255_device, read, write) AM_RANGE(0xec, 0xec) AM_MIRROR(0x02) AM_DEVREADWRITE(I8251A_TAG, i8251_device, data_r, data_w) AM_RANGE(0xed, 0xed) AM_MIRROR(0x02) AM_DEVREADWRITE(I8251A_TAG, i8251_device, status_r, control_w) ADDRESS_MAP_END static INPUT_PORTS_START( isbc8030 ) PORT_START(I8251A_BAUD_TAG) PORT_DIPNAME( 0x3f, 0x01, "i8251 Baud Rate" ) PORT_DIPSETTING( 0x01, "4800") PORT_DIPSETTING( 0x02, "2400") PORT_DIPSETTING( 0x04, "1200") PORT_DIPSETTING( 0x08, "600") PORT_DIPSETTING( 0x10, "300") PORT_DIPSETTING( 0x20, "150") PORT_DIPSETTING( 0x40, "75") INPUT_PORTS_END WRITE_LINE_MEMBER( isbc8030_state::usart_clock_tick ) { UINT8 old_counter = m_usart_divide_counter; m_usart_divide_counter++; UINT8 transition = (old_counter ^ m_usart_divide_counter) & m_usart_baud_rate->read(); if (transition) { m_usart->write_txc(m_usart_clock_state); m_usart->write_rxc(m_usart_clock_state); m_usart_clock_state ^= 1; } } WRITE_LINE_MEMBER( isbc8030_state::isbc8030_tmr2_w ) { m_usart->write_rxc(state); m_usart->write_txc(state); } static DEVICE_INPUT_DEFAULTS_START( terminal ) // set up terminal to default to 4800 DEVICE_INPUT_DEFAULTS( "RS232_RXBAUD", 0xff, RS232_BAUD_4800 ) DEVICE_INPUT_DEFAULTS( "RS232_TXBAUD", 0xff, RS232_BAUD_4800 ) DEVICE_INPUT_DEFAULTS( "RS232_STARTBITS", 0xff, RS232_STARTBITS_1 ) DEVICE_INPUT_DEFAULTS( "RS232_DATABITS", 0xff, RS232_DATABITS_8 ) DEVICE_INPUT_DEFAULTS( "RS232_PARITY", 0xff, RS232_PARITY_NONE ) DEVICE_INPUT_DEFAULTS( "RS232_STOPBITS", 0xff, RS232_STOPBITS_1 ) DEVICE_INPUT_DEFAULTS_END static MACHINE_CONFIG_START( isbc8030, isbc8030_state ) /* basic machine hardware */ MCFG_CPU_ADD("maincpu", I8085A, XTAL_22_1184MHz / 4) MCFG_CPU_PROGRAM_MAP(isbc8030_mem) MCFG_CPU_IO_MAP(isbc8030_io) MCFG_PIC8259_ADD(I8259A_TAG, INPUTLINE(":maincpu", 0), VCC, NOOP) MCFG_DEVICE_ADD(I8253_TAG, PIT8253, 0) MCFG_PIT8253_CLK0(XTAL_22_1184MHz / 18) MCFG_PIT8253_OUT0_HANDLER(DEVWRITELINE(I8259A_TAG, pic8259_device, ir0_w)) MCFG_PIT8253_CLK1(XTAL_22_1184MHz / 18) MCFG_PIT8253_CLK2(XTAL_22_1184MHz / 18) MCFG_PIT8253_OUT2_HANDLER(WRITELINE(isbc8030_state, isbc8030_tmr2_w)) MCFG_DEVICE_ADD(I8251A_TAG, I8251, 0) MCFG_I8251_TXD_HANDLER(DEVWRITELINE(RS232_TAG, rs232_port_device, write_txd)) MCFG_I8251_DTR_HANDLER(DEVWRITELINE(RS232_TAG, rs232_port_device, write_dtr)) MCFG_I8251_RTS_HANDLER(DEVWRITELINE(RS232_TAG, rs232_port_device, write_rts)) MCFG_DEVICE_ADD(I8255A_TAG, I8255A, 0) MCFG_RS232_PORT_ADD(RS232_TAG, default_rs232_devices, "terminal") MCFG_RS232_RXD_HANDLER(DEVWRITELINE(I8251A_TAG, i8251_device, write_rxd)) MCFG_RS232_DSR_HANDLER(DEVWRITELINE(I8251A_TAG, i8251_device, write_dsr)) MCFG_RS232_CTS_HANDLER(DEVWRITELINE(I8251A_TAG, i8251_device, write_cts)) MCFG_DEVICE_CARD_DEVICE_INPUT_DEFAULTS("terminal", terminal) MCFG_DEVICE_ADD("usart_clock", CLOCK, XTAL_18_432MHz/60) MCFG_CLOCK_SIGNAL_HANDLER(WRITELINE(isbc8030_state, usart_clock_tick)) MACHINE_CONFIG_END /* ROM definition */ ROM_START( isbc8030 ) ROM_REGION( 0x10000, "maincpu", ROMREGION_ERASEFF ) ROM_LOAD( "mon830.bin", 0x0000, 0x0800, CRC(cda15115) SHA1(242dad14a919568178b363c3e27f22ec0a5849b3)) ROM_END /* YEAR NAME PARENT COMPAT MACHINE INPUT CLASS INIT COMPANY FULLNAME FLAGS */ COMP( 1978, isbc8030, 0, 0, isbc8030, isbc8030, driver_device, 0, "Intel", "iSBC 80/30", MACHINE_NO_SOUND_HW )