// license:BSD-3-Clause // copyright-holders:Angelo Salese, Nicola Salmoria /******************************************************************************************* Fever Soccer (c) 2004 Seibu Kaihatsu A down-grade of the Seibu SPI Hardware with SH-2 as main cpu. driver by Angelo Salese & Nicola Salmoria The input routines are very convoluted in comparison to previous Seibu games, looping over a complex control structure. Could these be derived from the "Touch Panel System" DVD mahjong games Seibu released under the CATS label? TODO: - Layout including lamps - Hopper only works in "COIN HOPPER" mode - Do button 5 or remaining DIPs actually do anything outside service mode? ============================================================================ Fever Soccer (JAMMA based Gambling Game) Seibu Kaihatsu Inc. PCB (c) 2004 SYS_SH2B + SYS_SH2B Rom Board Very simple PCB contains: CPU: Hitachi SH-2 (HD6417604F28) Audio: OKI 6295 (rebadged as AD-65) GFX CHIP: RISE11 (custom graphics chip with programmable decryption) EEPROM: ST93C56A OSC: 28.63636MHz DSW: Single 4 switch Other: Battery (CR2032) Sigma XLINX 9572 JRC 6355E Serial Real Time Clock (connected to a 32.768KHz OSC) RAM: BSI BS62LV1024SC-70 (x2) EtronTech EM51256C-15J (x4) PRG0.U0139 ST M27C1001 (PCB can handle up to 27C080) PRG1.U0140 ST M27C1001 PCM.U0743 ST M27C4001 On the SYS_SH2B ROM BOARD: OBJ1.U011 ST M27C160 OBJ2.U012 ST M27C160 OBJ3.U013 ST M27C160 Not used / unpopulated: U0145 LH28F800SU (Alt program ROM near SH-2) U0744 LH28F800SU (Alt PCM ROM near AD-65) U0561 LH28F800SU OBJ1-1 (near ROM BOARD connector & RISE11 chip) U0562 LH28F800SU OBJ2-1 U0563 LH28F800SU OBJ3-1 U0564 LH28F800SU OBJ4-1 *******************************************************************************************/ #include "emu.h" #include "cpu/sh/sh2.h" #include "machine/seibuspi.h" #include "sound/okim6295.h" #include "machine/eepromser.h" #include "machine/rtc4543.h" #include "machine/nvram.h" #include "machine/ticket.h" #include "emupal.h" #include "screen.h" #include "speaker.h" class feversoc_state : public driver_device { public: feversoc_state(const machine_config &mconfig, device_type type, const char *tag) : driver_device(mconfig, type, tag), m_mainram1(*this, "workram1"), m_mainram2(*this, "workram2"), m_nvram(*this, "nvram"), m_spriteram(*this, "spriteram"), m_in(*this, {"IN1", "IN0"}), m_lamps(*this, "lamp%u", 1U), m_maincpu(*this, "maincpu"), m_oki(*this, "oki"), m_eeprom(*this, "eeprom"), m_rtc(*this, "rtc"), m_hopper(*this, "hopper"), m_gfxdecode(*this, "gfxdecode"), m_palette(*this, "palette") { } void init_feversoc(); void feversoc(machine_config &config); private: DECLARE_READ16_MEMBER(in_r); DECLARE_WRITE16_MEMBER(output_w); DECLARE_WRITE16_MEMBER(output2_w); void feversoc_map(address_map &map); uint32_t screen_update_feversoc(screen_device &screen, bitmap_ind16 &bitmap, const rectangle &cliprect); DECLARE_WRITE_LINE_MEMBER(feversoc_irq); DECLARE_WRITE16_MEMBER(feversoc_irq_ack); virtual void machine_start() override; required_shared_ptr m_mainram1; required_shared_ptr m_mainram2; required_shared_ptr m_nvram; required_shared_ptr m_spriteram; required_ioport_array<2> m_in; output_finder<7> m_lamps; required_device m_maincpu; required_device m_oki; required_device m_eeprom; required_device m_rtc; required_device m_hopper; required_device m_gfxdecode; required_device m_palette; }; #define MASTER_CLOCK XTAL(28'636'363) uint32_t feversoc_state::screen_update_feversoc(screen_device &screen, bitmap_ind16 &bitmap, const rectangle &cliprect) { uint32_t *spriteram32 = m_spriteram; int offs,spr_offs,colour,sx,sy,h,w,dx,dy; bitmap.fill(m_palette->pen(0), cliprect); //black pen for(offs=(0x2000/4)-2;offs>-1;offs-=2) { spr_offs = (spriteram32[offs+0] & 0x3fff); if(spr_offs == 0) continue; sy = (spriteram32[offs+1] & 0x01ff); sx = (spriteram32[offs+1] & 0x01ff0000)>>16; colour = (spriteram32[offs+0] & 0x003f0000)>>16; w = ((spriteram32[offs+0] & 0x07000000)>>24)+1; h = ((spriteram32[offs+0] & 0x70000000)>>28)+1; if( sy & 0x100) sy-=0x200; for(dx=0;dxgfx(0)->transpen(bitmap,cliprect,spr_offs++,colour,0,0,(sx+dx*16),(sy+dy*16),0x3f); } return 0; } READ16_MEMBER(feversoc_state::in_r) { return m_in[offset]->read() & 0xffff; } WRITE16_MEMBER( feversoc_state::output_w ) { machine().bookkeeping().coin_lockout_w(0, ~data & 0x40); machine().bookkeeping().coin_lockout_w(1, ~data & 0x40); machine().bookkeeping().coin_counter_w(0, data & 1); // data & 2 coin out counter machine().bookkeeping().coin_counter_w(1, data & 4); m_hopper->motor_w((data & 0x08) >> 3); // coin hopper or prize hopper m_oki->set_rom_bank((data & 0x20) >> 5); m_eeprom->di_write((data & 0x8000) ? 1 : 0); m_eeprom->clk_write((data & 0x4000) ? ASSERT_LINE : CLEAR_LINE); m_eeprom->cs_write((data & 0x2000) ? ASSERT_LINE : CLEAR_LINE); m_rtc->data_w((data & 0x0800) ? 1 : 0); m_rtc->wr_w((data & 0x0400) ? ASSERT_LINE : CLEAR_LINE); m_rtc->clk_w((data & 0x0200) ? ASSERT_LINE : CLEAR_LINE); m_rtc->ce_w((data & 0x0100) ? ASSERT_LINE : CLEAR_LINE); } WRITE16_MEMBER( feversoc_state::output2_w ) { for (int n = 0; n < 7; n++) m_lamps[n] = BIT(data, n); // LAMP1-LAMP7 machine().bookkeeping().coin_counter_w(2, data & 0x2000); // key in //data & 0x4000 key out } void feversoc_state::feversoc_map(address_map &map) { map(0x00000000, 0x0003ffff).rom(); map(0x02000000, 0x0202ffff).ram().share("workram1"); //work ram map(0x02030000, 0x0203ffff).ram().share("nvram"); map(0x02034000, 0x0203dfff).ram().share("workram2"); //work ram map(0x0203e000, 0x0203ffff).ram().share("spriteram"); map(0x06000000, 0x06000001).w(FUNC(feversoc_state::output_w)); map(0x06000002, 0x06000003).w(FUNC(feversoc_state::output2_w)); map(0x06000006, 0x06000007).w(FUNC(feversoc_state::feversoc_irq_ack)); map(0x06000008, 0x0600000b).r(FUNC(feversoc_state::in_r)); map(0x0600000d, 0x0600000d).rw(m_oki, FUNC(okim6295_device::read), FUNC(okim6295_device::write)); //AM_RANGE(0x06010000, 0x0601007f) AM_DEVREADWRITE("obj", seibu_encrypted_sprite_device, read, write) AM_RAM map(0x06010060, 0x06010063).nopw(); // sprite buffering map(0x06018000, 0x06019fff).ram().w(m_palette, FUNC(palette_device::write32)).share("palette"); } static const gfx_layout spi_spritelayout = { 16,16, RGN_FRAC(1,3), 6, { RGN_FRAC(0,3)+0,RGN_FRAC(0,3)+8,RGN_FRAC(1,3)+0,RGN_FRAC(1,3)+8,RGN_FRAC(2,3)+0,RGN_FRAC(2,3)+8 }, { 7,6,5,4,3,2,1,0,23,22,21,20,19,18,17,16 }, { 0*32,1*32,2*32,3*32,4*32,5*32,6*32,7*32,8*32,9*32,10*32,11*32,12*32,13*32,14*32,15*32 }, 16*32 }; static GFXDECODE_START( gfx_feversoc ) GFXDECODE_ENTRY( "gfx1", 0, spi_spritelayout, 0, 0x40 ) GFXDECODE_END static INPUT_PORTS_START( feversoc ) // The "ANALIZE" input shown in test mode does not exist on this hardware. PORT_START("IN0") PORT_BIT( 0x0001, IP_ACTIVE_LOW, IPT_START1 ) PORT_BIT( 0x0002, IP_ACTIVE_LOW, IPT_COIN2 ) PORT_BIT( 0x0004, IP_ACTIVE_LOW, IPT_SERVICE ) PORT_BIT( 0x0008, IP_ACTIVE_LOW, IPT_GAMBLE_KEYIN ) PORT_NAME("Key In (Service)") PORT_BIT( 0x0010, IP_ACTIVE_LOW, IPT_COIN1 ) PORT_BIT( 0x0020, IP_ACTIVE_HIGH, IPT_CUSTOM ) PORT_READ_LINE_DEVICE_MEMBER("hopper", ticket_dispenser_device, line_r) PORT_BIT( 0x0040, IP_ACTIVE_HIGH, IPT_CUSTOM ) PORT_READ_LINE_DEVICE_MEMBER("eeprom", eeprom_serial_93cxx_device, do_read) PORT_BIT( 0x0080, IP_ACTIVE_HIGH, IPT_CUSTOM ) PORT_READ_LINE_DEVICE_MEMBER("rtc", rtc4543_device, data_r) PORT_DIPNAME( 0x0100, 0x0100, DEF_STR( Service_Mode ) ) PORT_DIPLOCATION( "DIP1:1" ) PORT_DIPSETTING( 0x0100, DEF_STR( Off ) ) PORT_DIPSETTING( 0x0000, DEF_STR( On ) ) PORT_DIPUNKNOWN_DIPLOC( 0x0200, 0x0200, "DIP1:2" ) PORT_DIPNAME( 0x0400, 0x0400, "Backup Memory" ) PORT_DIPLOCATION( "DIP1:3" ) PORT_DIPSETTING( 0x0400, "Use" ) PORT_DIPSETTING( 0x0000, "Reset" ) PORT_DIPUNKNOWN_DIPLOC( 0x0800, 0x0800, "DIP1:4" ) PORT_DIPUNKNOWN_DIPLOC( 0x1000, 0x1000, "DIP1:5" ) PORT_DIPUNKNOWN_DIPLOC( 0x2000, 0x2000, "DIP1:6" ) PORT_DIPUNKNOWN_DIPLOC( 0x4000, 0x4000, "DIP1:7" ) PORT_DIPUNKNOWN_DIPLOC( 0x8000, 0x8000, "DIP1:8" ) PORT_START("IN1") PORT_BIT( 0x0001, IP_ACTIVE_LOW, IPT_SLOT_STOP1 ) PORT_NAME("Stop 1 (BTN1)") PORT_BIT( 0x0002, IP_ACTIVE_LOW, IPT_SLOT_STOP2 ) PORT_NAME("Stop 2 (BTN2)") PORT_BIT( 0x0004, IP_ACTIVE_LOW, IPT_SLOT_STOP3 ) PORT_NAME("Stop 3 (BTN3)") PORT_BIT( 0x0008, IP_ACTIVE_LOW, IPT_GAMBLE_BET ) PORT_NAME("Bet (BTN4)") PORT_BIT( 0x0010, IP_ACTIVE_LOW, IPT_OTHER ) PORT_NAME("Unknown (BTN5)") PORT_CODE(KEYCODE_J) PORT_BIT( 0x0020, IP_ACTIVE_LOW, IPT_GAMBLE_KEYOUT ) PORT_NAME("Key Out (BTN6)") PORT_BIT( 0x0040, IP_ACTIVE_LOW, IPT_GAMBLE_PAYOUT ) PORT_NAME("Coin Out (BTN7)") PORT_BIT( 0x0080, IP_ACTIVE_LOW, IPT_MEMORY_RESET ) PORT_BIT( 0xff00, IP_ACTIVE_LOW, IPT_UNUSED ) INPUT_PORTS_END WRITE_LINE_MEMBER(feversoc_state::feversoc_irq) { if (state) m_maincpu->set_input_line(8, ASSERT_LINE); } WRITE16_MEMBER(feversoc_state::feversoc_irq_ack) { m_maincpu->set_input_line(8, CLEAR_LINE); } void feversoc_state::machine_start() { m_lamps.resolve(); } MACHINE_CONFIG_START(feversoc_state::feversoc) /* basic machine hardware */ MCFG_DEVICE_ADD("maincpu",SH2,MASTER_CLOCK) MCFG_DEVICE_PROGRAM_MAP(feversoc_map) /* video hardware */ MCFG_SCREEN_ADD("screen", RASTER) MCFG_SCREEN_REFRESH_RATE(60) MCFG_SCREEN_VBLANK_TIME(ATTOSECONDS_IN_USEC(0)) MCFG_SCREEN_SIZE(40*8, 32*8) MCFG_SCREEN_VISIBLE_AREA(0*8, 40*8-1, 0*8, 30*8-1) //dynamic resolution? MCFG_SCREEN_UPDATE_DRIVER(feversoc_state, screen_update_feversoc) MCFG_SCREEN_PALETTE(m_palette) MCFG_SCREEN_VBLANK_CALLBACK(WRITELINE(*this, feversoc_state, feversoc_irq)) GFXDECODE(config, m_gfxdecode, m_palette, gfx_feversoc); PALETTE(config, m_palette).set_format(palette_device::xBGR_555, 0x1000); /* sound hardware */ SPEAKER(config, "mono").front_center(); MCFG_DEVICE_ADD("oki", OKIM6295, MASTER_CLOCK/16, okim6295_device::PIN7_LOW) //pin 7 & frequency not verified (clock should be 28,6363 / n) MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 0.6) EEPROM_93C56_16BIT(config, "eeprom"); JRC6355E(config, m_rtc, XTAL(32'768)); NVRAM(config, "nvram", nvram_device::DEFAULT_ALL_0); MCFG_TICKET_DISPENSER_ADD("hopper", attotime::from_msec(60), TICKET_MOTOR_ACTIVE_HIGH, TICKET_STATUS_ACTIVE_HIGH ) MACHINE_CONFIG_END /*************************************************************************** Game driver(s) ***************************************************************************/ // Date of build, as displayed in service mode, is Apr 30 2004/22:44:21. // Program ROMs also contain leftover strings and tables from a previous build dated Apr 26 2004/20:25:31. ROM_START( feversoc ) ROM_REGION32_BE( 0x40000, "maincpu", 0 ) ROM_LOAD16_BYTE( "prog0.u0139", 0x00001, 0x20000, CRC(fa699503) SHA1(96a834d4f7d5b764aa51db745afc2cd9a7c9783d) ) ROM_LOAD16_BYTE( "prog1.u0140", 0x00000, 0x20000, CRC(fd4d7943) SHA1(d7d782f878656bc79d70589f9df2cbcfff0adb5e) ) ROM_REGION( 0x600000, "gfx1", 0) /* text */ ROM_LOAD("obj1.u011", 0x000000, 0x200000, CRC(d8c8dde7) SHA1(3ef815fb1e21a0bd907ee835bc7a32d80f6a9d28) ) ROM_LOAD("obj2.u012", 0x200000, 0x200000, CRC(8e93bfda) SHA1(3b4740cefb164efc320fb69f58e8800d2646fea6) ) ROM_LOAD("obj3.u013", 0x400000, 0x200000, CRC(8c8c6e8b) SHA1(bed4990d6eebb7aefa200ad2bed9b7e71e6bd064) ) ROM_REGION( 0x80000, "oki", 0 ) ROM_LOAD( "pcm.u0743", 0x00000, 0x80000, CRC(20b0c0e3) SHA1(dcf2f620a8fe695688057dbaf5c431a32a832440) ) ROM_END void feversoc_state::init_feversoc() { uint32_t *rom = (uint32_t *)memregion("maincpu")->base(); seibuspi_rise11_sprite_decrypt_feversoc(memregion("gfx1")->base(), 0x200000); m_maincpu->sh2drc_set_options(SH2DRC_FASTEST_OPTIONS); m_maincpu->sh2drc_add_fastram(0x00000000, 0x0003ffff, 1, rom); m_maincpu->sh2drc_add_fastram(0x02000000, 0x0202ffff, 0, &m_mainram1[0]); m_maincpu->sh2drc_add_fastram(0x02030000, 0x02033fff, 0, &m_nvram[0]); m_maincpu->sh2drc_add_fastram(0x02034000, 0x0203dfff, 0, &m_mainram2[0]); m_maincpu->sh2drc_add_fastram(0x0203e000, 0x0203ffff, 0, &m_spriteram[0]); } GAME( 2004, feversoc, 0, feversoc, feversoc, feversoc_state, init_feversoc, ROT0, "Seibu Kaihatsu", "Fever Soccer", 0 )