// license:BSD-3-Clause // copyright-holders:Curt Coder, Robbbert /****************************************************************************************** Commodore C900 UNIX prototype http://www.zimmers.net/cbmpics/c900.html http://www.zimmers.net/cbmpics/cbm/900/c900-chips.txt Chips: Z8001 CPU, Z8010 MMU, Z8030 SCC, Z8036 CIO. Crystal: 12MHz The Z8030 runs 2 serial ports. The Z8036 runs the IEEE interface and the speaker. The FDC is an intelligent device that communicates with the main board via the MMU. It has a 6508 CPU. Disk drive is a Matsushita JA-560-012 Increasing the amount of RAM stops the error message, however it still keeps running into the weeds (jumps to 00000). Due to lack of banking, the stack is pointing at rom. To Do: - Banking - Pretty much everything - Need schematics, technical manuals and so on. - Eventually, will need software. - Disassembler needs fixing *******************************************************************************************/ #include "emu.h" #include "cpu/z8000/z8000.h" #include "cpu/m6502/m6510.h" #include "machine/z80scc.h" #include "bus/rs232/rs232.h" #include "machine/z8536.h" #include "sound/spkrdev.h" #include "emupal.h" #include "speaker.h" class c900_state : public driver_device { public: c900_state(const machine_config &mconfig, device_type type, const char *tag) : driver_device(mconfig, type, tag) , m_maincpu(*this, "maincpu") , m_fdcpu(*this, "fdcpu") , m_spkrdev(*this, "speaker") { } void c900(machine_config &config); private: void sound_pb_w(u8 data); void data_map(address_map &map); void io_map(address_map &map); void special_io_map(address_map &map); void mem_map(address_map &map); void fdc_map(address_map &map); required_device m_maincpu; required_device m_fdcpu; required_device m_spkrdev; }; void c900_state::sound_pb_w(u8 data) { m_spkrdev->level_w(BIT(data, 0)); } void c900_state::mem_map(address_map &map) { map(0x00000, 0x07fff).rom().region("roms", 0); } void c900_state::data_map(address_map &map) { map(0x00000, 0x07fff).rom().region("roms", 0); map(0x08000, 0x6ffff).ram(); map(0xf0000, 0xf1fff).ram(); } void c900_state::io_map(address_map &map) { map(0x0000, 0x007f).rw("cio", FUNC(z8036_device::read), FUNC(z8036_device::write)).umask16(0x00ff); map(0x0100, 0x013f).rw("scc", FUNC(scc8030_device::zbus_r), FUNC(scc8030_device::zbus_w)).umask16(0x00ff); } void c900_state::special_io_map(address_map &map) { // TODO: Z8010 MMU } void c900_state::fdc_map(address_map &map) { map(0x0000, 0x01ff).noprw(); // internal map(0xe000, 0xffff).rom().region("fdc", 0); } static INPUT_PORTS_START( c900 ) INPUT_PORTS_END /* F4 Character Displayer */ static const gfx_layout c900_charlayout = { 8, 16, /* 8 x 16 characters */ 256, /* 256 characters */ 1, /* 1 bits per pixel */ { 0 }, /* no bitplanes */ /* x offsets */ { 0, 1, 2, 3, 4, 5, 6, 7 }, /* y offsets */ { 0*8, 1*8, 2*8, 3*8, 4*8, 5*8, 6*8, 7*8, 8*8, 9*8, 10*8, 11*8, 12*8, 13*8, 14*8, 15*8 }, 8*16 /* every char takes 16 bytes */ }; static GFXDECODE_START( gfx_c900 ) GFXDECODE_ENTRY( "chargen", 0x0000, c900_charlayout, 0, 1 ) GFXDECODE_END void c900_state::c900(machine_config &config) { /* basic machine hardware */ Z8001(config, m_maincpu, 12_MHz_XTAL / 2); m_maincpu->set_addrmap(AS_PROGRAM, &c900_state::mem_map); m_maincpu->set_addrmap(AS_DATA, &c900_state::data_map); m_maincpu->set_addrmap(AS_IO, &c900_state::io_map); m_maincpu->set_addrmap(z8001_device::AS_SIO, &c900_state::special_io_map); M6508(config, m_fdcpu, 12_MHz_XTAL / 8); // PH1/PH2 = 1.5 MHz m_fdcpu->set_addrmap(AS_PROGRAM, &c900_state::fdc_map); GFXDECODE(config, "gfxdecode", "palette", gfx_c900); PALETTE(config, "palette", palette_device::MONOCHROME); z8036_device &cio(Z8036(config, "cio", 12_MHz_XTAL / 16)); // SNDCLK = 750kHz cio.pb_wr_cb().set(FUNC(c900_state::sound_pb_w)); scc8030_device &scc(SCC8030(config, "scc", 12_MHz_XTAL / 2)); // 5'850'000 is the ideal figure /* Port B */ scc.out_txdb_callback().set("rs232", FUNC(rs232_port_device::write_txd)); scc.out_dtrb_callback().set("rs232", FUNC(rs232_port_device::write_dtr)); scc.out_rtsb_callback().set("rs232", FUNC(rs232_port_device::write_rts)); //scc.out_int_callback().set("rs232", FUNC(c900_state::scc_int)); rs232_port_device &rs232(RS232_PORT(config, "rs232", default_rs232_devices, "terminal")); rs232.rxd_handler().set("scc", FUNC(scc8030_device::rxb_w)); rs232.cts_handler().set("scc", FUNC(scc8030_device::ctsb_w)); SPEAKER(config, "mono").front_center(); SPEAKER_SOUND(config, m_spkrdev).add_route(ALL_OUTPUTS, "mono", 0.05); } ROM_START( c900 ) ROM_REGION16_BE( 0x8000, "roms", 0 ) ROM_LOAD16_BYTE( "c 900 boot-h v 1.0.bin.u17", 0x0000, 0x4000, CRC(c3aa7fc1) SHA1(ff12dd100fa7b1e7e931e9a8ef4c4f5cc056e099) ) ROM_LOAD16_BYTE( "c 900 boot-l v 1.0.bin.u18", 0x0001, 0x4000, CRC(0aa39272) SHA1(b2c5da4586d38fc66bb33aafeae4dbda36080f1e) ) ROM_REGION( 0x2000, "fdc", 0 ) ROM_LOAD( "s41_6-20-85.bin", 0x0000, 0x2000, CRC(ec245721) SHA1(4cc19014b4887833a56b1236dc5fe39cc5d7b5c3) ) ROM_REGION( 0x1000, "chargen", 0 ) // this must be for the c900 terminal as the mainframe has no video output ROM_LOAD( "380217-01.u2", 0x0000, 0x1000, CRC(64cb4171) SHA1(e60d796170addfd27e2c33090f9c512c7e3f99f5) ) ROM_END /* YEAR NAME PARENT COMPAT MACHINE INPUT CLASS INIT COMPANY FULLNAME FLAGS */ COMP( 1985, c900, 0, 0, c900, c900, c900_state, empty_init, "Commodore", "Commodore 900", MACHINE_IS_SKELETON )