/*************************************************************************** Arkanoid driver - I think the MCU dump we're using with the original sets is actually from a bootleg? It's similar to the ones dumped from other bootlegs and the 2/3 of the decapped MCUs appear to be very different. Another bootleg had a dump very similar to the fresh decaps instead. This needs sorting out properly. The hookups for the different types of MCU is not identical. Japanese version support cocktail mode (DSW #7), the others don't. Here are the versions we have: arkanoid World version, probably an earlier revision arkanoidu USA version, probably a later revision; There has been code inserted, NOT patched, so I don't think it's a bootleg The 68705 code for this one was not available; I made it up from the World version changing the level data pointer table. arkanoiduo USA version, probably an earlier revision ROM a75-10.bin should be identical to the real World one. (It only differs in the country byte from A75-11.ROM) This version works fine with the real MCU ROM arkatour Tournament version The 68705 code for this one was not available; I made it up from the World version changing the level data pointer table. arkanoidj Japanese version with level selector. The 68705 code for this one was not available; I made it up from the World version changing the level data pointer table. arkbl2 Bootleg of the early Japanese version. The only difference is that the warning text has been replaced by "WAIT" ROM E2.6F should be identical to the real Japanese one. (It only differs in the country byte from A75-11.ROM) This version works fine with the real MCU ROM arkatayt Another bootleg of the early Japanese one, more heavily modified arkblock Another bootleg of the early Japanese one, more heavily modified arkbloc2 Another bootleg arkbl3 Another bootleg of the early Japanese one, more heavily modified paddle2 Another bootleg of the early Japanese one, more heavily modified arkangc Game Corporation bootleg with level selector Most if not all Arkanoid sets have a bug in their game code. It occurs on the final level where the player has to dodge falling objects. The bug resides in the collision detection routine which sometimes reads from unmapped addresses above $F000. For these addresses it is vital to read zero values, or else the player will die for no reason. Measured Clocks: Z80 - 5997077Hz (6Mhz) M68705 - 2998533Hz (3Mhz) YM2149 - 2998531Hz (3Mhz) Stephh's notes (based on the games Z80 code and some tests) : 0) Useful addresses and routines 0a) "Game Corporation" bootlegs, Tayto bootlegs, 'arkmcubl', 'ark1ball' - Basic routines : * 0x2044 : BC += A; * 0x204a : DE += A; * 0x2050 : HL += A; * 0x2056 : HL += A; DE = (HL); * 0x21f1 : Display string : Inputs : DE = string address in ROM HL = adress where the string will be displayed (most of the times in video RAM) A = colour String begins with the number of chars to display (eg: 0x02 "OK" to display "OK") * 0x210d : Display 1 char (called by previous routine) * 0x264a : Display score : Inputs : DE = score address HL = adress where the score will be displayed (most of the times in video RAM) * 0x266f : Display 1 digit (called by previous routine) * 0x67ae : Play sound (input : register A) - to be confirmed ! - Level issues : * 0xed72 : Level (0x00-0x20) * 0xed83 : Breakable bricks left (gold bricks are NOT counted) * 0x55a0 : Display level background * 0x55d9 : Display level bricks : Inputs : IY = index for bricks counter B = number of bricks to display * 0x55f6 : Display 1 background "column" * 0x5639 : Display 1 brick with its shadow * 0xed6b : Hits in the head of last level (0x00-0x10) This value is reset to 0x00 each time you lose a life. * 0x8d15 : Check if head of last level is dead - Lives issues : * 0xed71 : Current player lives * 0xed76 : Player 1 lives * 0xed7b : Player 2 lives * 0xef68 : When bit 0 set to 1, no more lives on score for player 1 * 0xef69 : When bit 0 set to 1, no more lives on score for player 2 * 0xef6a : Player 1 counter for extra lives on score * 0xef6b : Player 2 counter for extra lives on score * 0x22a0 : Draw lives at the bottom left of the screen * 0x2785 : Check player score for extra life - Score issues : * 0xc4d7 : Player 1 score / 10 (3 bytes, BCD coded, MSB first) * 0xc4db : Player 2 score / 10 (3 bytes, BCD coded, MSB first) * 0xc4df : Highscore / 10 (3 bytes, BCD coded, MSB first) * 0xef6c : Player 1 score / 1000 for next life (2 bytes, BCD coded, MSB first) * 0xef6e : Player 2 score / 1000 for next life (2 bytes, BCD coded, MSB first) * 0x2723 : Player score += DE; (BCD => 'daa' instructions) * 0x274a : Check player score for highscore - Speed issues : * 0xef63 : Speed counter which is increased each time the ball touches your paddle, any wall (up, left or right) or a brick; it is reset when speed changes or when you lose a life. * 0x094c : Speed table (16 bytes) * 0xc462 : Speed (0x01-0x0e) : Speed +1 when counter is above the value in the table (check code at 0x0900) Speed -2 when you get the slow pill ("S") (check code at 0x5423) Speed is sometimes increased when up wall is hit (check code at 0x1442 and table at 0x1462) - Pills issues : * 0xc658 : Falling pill (0x80 = none - 0x81-0x87) * 0x5474 : Pills routines table (7 * 2 bytes, LSB first) : . 0x53ff : "L" pill (laser) . 0x540d : "E" pill (enlarge) . 0x5418 : "C" pill (glue) . 0x5423 : "S" pill (slow) . 0x5436 : "B" pill (warp door) . 0x5446 : "D" pill (3 balls) . 0x5451 : "P" pill (extra life) * 0x53c8 : Check pill effect - Miscellaneous addresses : * 0xef66 : 0x00 in demo mode else 0x01 * 0xed6f : Bit 1 determines player : 0 = player 1 - 1 = player 2 * 0xc4ce : Warp door status : 0x00 = closed - 0x01 = opened * 0xc469 : Balls in play : 0x00 = 1 ball - 0x02 = 2 or 3 balls - Miscellaneous routines : * 0xa234 : Enter initials * 0xa343 : Check if player has entered "SEX" as initials; if so, replace them with "H !" (no side effect) 1) Bootlegs with MCU 1a) 'arkmcubl' - Region = 0x76 (Japan). - The bootleg is based on a Japenese early version we don't have. - The MCU is dumped, but the game doesn't run with it. However, there is no problem if I use the one from the World early version. Until I know what to do with it, I use the MCU from the World early version and "save" the existing one in "user1". Let me know if it's good. - "(c) Taito Corporation 1986". - Displays the "Arkanoid" title. - "HARDWARE TEST" message is written, tests are performed, countdown 11 to 0. - "NOTICE" screen replaces by "WAIT" without any more text. However, the text is still in the ROM at 0x7b81 with changes at the begining : * "NOTICE" -> "WAIT " * 0xbe "THIS GAME IS" -> 0x01 " " 0x7b "IS" 0xde "GAME" 0x6d "IS" IMO these changes are made to bypass the checksums - You can't select your starting level - Known bugs : NONE ! 1b) 'ark1ball' - Note from the dumper (f205v, 2005.09.29) : "It's a bootleg of "Arkanoid (Japan)", with notice screen eliminated (it only shows a black screen with a red WAIT) and a fix (no dips selection) 1 ball x game and NO starting level selection". However, there is still code in the game which tests the Dip Switches ! - Region = 0x76 (Japan). - The bootleg is based on a Japenese early version we don't have. In fact, it is completely based on 'arkmcubl' : Z:\MAME\roms>romcmp ark1ball.zip arkmcubl.zip -d 3 and 2 files e1.6d a-1.7d IDENTICAL e2.6f 2palline.7f 99.957275% 68705p3.6i NO MATCH Z:\MAME\data>fc /B e2.6f 2palline.7f Comparing files e2.6f and 2PALLINE.7F 000013BE: 20 60 00001A28: 05 02 00001A29: 03 01 00001C80: 20 60 00001C9C: 20 60 00001ED9: 53 36 00001EDA: 53 35 00001EE0: 53 33 00001EE7: 54 34 00001EE9: 52 42 00001EF7: 52 42 00001EF9: 66 46 - The MCU is not dumped, and the game doesn't run with the one from 'arkmcubl'. However, there is no problem if I use the one from the World early version. Until I know what to do with it, I use the MCU from the World early version. - This version is supposed to be a harder version : * less lives (1 or 2 instead of 3 or 5) * 60K for 1st bonus life instead of 20K - Known bugs : * Names on highscores table are wrong (ingame bug to bypass the checksums) 2) "Game Corporation" bootlegs and assimilated ones. - Region = 0x76 (Japan). - All bootlegs are based on a (bootleg) version we don't have. - Team credits have been replaced by bootleggers code. - Start of levels table at 0x7bd5 (32 * 2 bytes - MSB first) 2a) 'arkangc' - "(c) Game Corporation 1986". - Displays the "Arkanoid" title but routine to display "BLOCK" with bricks exists. - No hardware test and no "NOTICE" screen. - All reads from 0xf002 are patched. - No reads from 0xd008. - "Continue" Dip Switch has been replaced by sort of "Debug" Dip Switch : * affects ball speed at start of level (0x06 or 0x08) * affects level 2 (same as normal version or same as level 30) - You can select your starting level (between 1 and 30) but they aren't displayed like in the original Japanese set we have ('arkanoidj'). - Level 30 differs from original Japanese version - There seems to be code to edit levels (check code at 0x8082), but the routines don't seem to be called anymore. - Known bugs : * The paddle isn't centered when starting a new life and / or level; it doesn't "backup" the paddle position when a life is lost as well (I can't tell at the moment if it's an ingame bug or not) So the paddle can sometimes appear in the left wall ! * You are told be to able to select your starting level from level 1 to level 32 (ingame bug - check code at 0x3425) 2b) 'arkangc2' - "(c) Game Corporation 1986". - Displays the "Arkanoid" title but routine to display "BLOCK" with bricks exists. - No hardware test and no "NOTICE" screen. - No reads from 0xf002. - Reads bit 1 from 0xd008. - "Continue" Dip Switch has been replaced by sort of "Debug" Dip Switch : * affects ball speed at start of level (0x04 or 0x06) * affects level 2 (same as normal version or same as level 30) - You can select your starting level (between 1 and 30) but they aren't displayed like in the original Japanese set we have ('arkanoidj'). No "What round do you want to start from ?" message though. - Level 30 differs from original Japanese version (it also differs from 'arkangc') - The routine to handle the paddle is completely different as in 'arkangc' and any other bootlegs (check code at 0x96b0) - There seems to be code to edit levels (check code at 0x8082), but the routines don't seem to be called anymore. - Known bugs : * The paddle isn't centered when starting a new life and / or level; it doesn't "backup" the paddle position when a life is lost as well (I can't tell at the moment if it's an ingame bug or not) So the paddle can sometimes appear in the left wall ! * You are told be to able to select your starting level from level 1 to level 32 (ingame bug - check code at 0x3425) * The "test mode" display is completely corrupted (ingame bug - check unused code at 0x2f00 instead of standard text) But you can still press the buttons and test the paddle and the Dip Switches. 2c) 'block2' - " S. P. A. CO. ". - Displays "BLOCK II" with "bricks". - Colored bricks have been replaced with aliens (ripped from "Space Invaders" ?) - No standard hardware test and no "NOTICE" screen. - Specific hardware test which reads back at 0xf000 values written to 0xd018 (check code at 0x035e); the game enters a loop until good values are returned. - No reads from 0xf002. - Reads bit 1 from 0xd008. - "Continue" Dip Switch has been replaced by sort of "Debug" Dip Switch as in 'arkangc'; however, this has no effect due to newly patched code at 0x06e9 ! - You can select your starting level (between 1 and 30) but they aren't displayed like in the original Japanese set we have ('arkanoidj'). - Levels 1, 2, 3, 4, 6, 7, 11, 14, 30, 31 and 32 differ from original Japanese version; level 1 starts at a different offset (0x90a8 instead of 0xbf15). - Complerely different initials on high-scores table, but scores and rounds are the same as in the original Japanese set we have ('arkanoidj'). - There seems to be code to edit levels (check code at 0x8082), but the routines don't seem to be called anymore. - Known bugs : * The paddle isn't centered when starting a new life and / or level; it doesn't "backup" the paddle position when a life is lost as well (I can't tell at the moment if it's an ingame bug or not) So the paddle can sometimes appear in the left wall ! * The "test mode" display is completely corrupted (ingame bug - check unused code at 0x2f00 instead of standard text) But you can still press the buttons and test the paddle and the Dip Switches. 2d) 'arkblock' - Same as 'arkangc', the only difference is that it displays "BLOCK" with bricks instead of displaying the "Arkanoid" title : Z:\MAME\dasm>diff arkangc.asm arkblock.asm 8421,8422c8421,8424 < 32EF: 21 80 03 ld hl,$0380 < 32F2: CD D1 20 call $20D1 --- > 32EF: F3 di > 32F0: CD 90 7C call $7C90 > 32F3: C9 ret > 32F4: 14 inc d 2e) 'arkbloc2' - "(c) Game Corporation 1986". - Displays "BLOCK" with bricks. - No hardware test and no "NOTICE" screen. - All reads from 0xf002 are patched. - Reads bit 5 from 0xd008. - You can select your starting level (between 1 and 30) but they aren't displayed like in the original Japanese set we have ('arkanoidj'). - "Continue" Dip Switch has been replaced by sort of "Debug" Dip Switch : * affects ball speed at start of level (0x06 or 0x08) * affects level 2 (same as normal version or same as level 30) - You can select your starting level (between 1 and 30) but they aren't displayed like in the original Japanese set we have ('arkanoidj'). - Level 30 differs from original Japanese version (same as the one from 'arkangc2') - Known bugs : * You can go from one side of the screen to the other through the walls (I can't tell at the moment if it's an ingame bug or not) * You are told be to able to select your starting level from level 1 to level 32 (ingame bug - check code at 0x3425) 2f) 'arkgcbl' - "1986 ARKANOID 1986". - Displays the "Arkanoid" title but routine to display "BLOCK" with bricks exists. - No hardware test and no "NOTICE" screen. - Most reads from 0xf002 are patched. I need to fix the remaining ones (0x8a and 0xff). - Reads bits 1 and 5 from 0xd008. - "Continue" Dip Switch has been replaced by "Round Select" Dip Switch ("debug" functions from 'arkangc' have been patched). - Different "Bonus Lives" Dip Switch : * "60K 100K 60K+" or "60K" when you start a new game * "20K 60K 60K+" or "20K" when you continue - Different "Lives" Dip Switch (check table at 0x9a28) - Specific coinage (always 2C_1C) - If Dip Switch is set, you can select your starting level (between 1 and 30) but they aren't displayed like in the original Japanese set we have ('arkanoidj'). - Same level 30 as original Japanese version - Known bugs : * You can go from one side of the screen to the other through the walls (I can't tell at the moment if it's an ingame bug or not) * You are told be to able to select your starting level from level 1 to level 32 (ingame bug - check code at 0x3425) * Sound in "Demo Mode" if 1 coin is inserted (ingame bug - check code at 0x0283) * Red square on upper middle left "led" when it is supposed to be yellow (ingame bug) 2g) 'paddle2' - Different title, year, and inside texts but routine to display "BLOCK" with bricks exists. - No hardware test and no "NOTICE" screen. - I need to fix ALL reads from 0xf002. - Reads bits 0 to 3 and 5 from 0xd008. - "Continue" Dip Switch has been replaced by "Round Select" Dip Switch ("debug" functions from 'arkangc' have been patched). - No more "Service Mode" Dip Switch (even if code is still there for it). This Dip Switch now selects how spinners are handled : * bit 2 = 0 => read from 0xd018 only * bit 2 = 1 => read from 0xd018 + read from 0xd008 I set its default to 1 as parts of the game still branch to 0x96b0. - Different "Bonus Lives" Dip Switch : * "60K 100K 60K+" or "60K" when you start a new game * "20K 60K 60K+" or "20K" when you continue - Different "Lives" Dip Switch (check table at 0x9a28) - If Dip Switch is set, you can select your starting level (between 1 and 30) but they aren't displayed like in the original Japanese set we have ('arkanoidj'). - Levels are based on the ones from "Arkanoid II". - Known bugs : * You can go from one side of the screen to the other through the walls (I can't tell at the moment if it's an ingame bug or not) * You can't correctly enter your initials at the end of the game (ingame bug ? check code at 0xa23e and difference at 0xa273) * On intro and last screen, colour around main ship is yellow instead of red (ingame bug due to numerous patches) 3) "Tayto" bootlegs and assimilated ones. - Region = 0x76 (Japan). - All bootlegs are based on a Japenese early version we don't have. - Start of levels table at 0xbd75 (32 * 2 bytes - LSB first) 3a) 'arkatayt' - "(c) Tayto Corporation 1986" but the Taito original logo is displayed. - Displays the "Arkanoid" title. - "HARDWARE TEST" message is written, tests are performed, but no countdown. - "NOTICE" screen replaces by "WAIT" without any more text. However, the text is still in the ROM at 0x7b81 with changes at the begining : * "NOTICE" -> "WAIT " * 0xbe "THIS" -> 0x01 " HIS" IMO these changes are made to bypass the checksums - You can't select your starting level - Known bugs : * level 16 is corrupted with extra bricks (ingame bug due to extra code from 0x5042 to 0x5086) * level 25 is shifted 8 "columns" to the right (ingame bug due to bad level offset at 0xbda5 : 0xe5 instead of 0xed) 3b) 'arktayt2' - This version is supposed to be a harder version of 'arkatayt' : * less lives (2 or 3 instead of 3 or 5) * 60K for 1st bonus life instead of 20K Same as 'arkatayt' otherwise - Known bugs : * level 16 is corrupted with extra bricks (ingame bug due to extra code from 0x5042 to 0x5086) * level 25 is shifted 8 "columns" to the right (ingame bug due to bad level offset at 0xbda5 : 0xe5 instead of 0xed) * Names on highscores table are wrong (ingame bug to bypass the checksums) TO DO (2006.09.12) : - Check the following Taito sets (adresses, routines and Dip Switches) : * 'arkanoid' = 'arkanoiduo' * 'arkanoidj' * 'arkanoidu' * 'arkatour' - Add more notes about main addresses and routines in the Z80 - Try to understand the problem with the MCU in the following sets : * 'arkmcubl' * 'ark1ball' Stephh's log (2006.09.05) : - Interverted 'arkblock' and 'arkbloc2' sets for better comparaison - Renamed sets : * 'arkbl2' -> 'arkmcubl' * 'arkbl3' -> 'arkgcbl' - Changed some games descriptions - Removed flags from the following sets : * 'arkbloc2' (old 'arkblock') * 'arkgcbl' (old 'arkbl3') * 'paddle2' This way, even if emulation isn't perfect, people can try them and report bugs. Stephh's log (2006.09.12) : - Renamed sets : * 'arkatayt' -> 'arktayt2' - Changed some games descriptions - Added sets : * 'ark1ball' * 'arkangc2' * 'arkatayt' - Removed flags from the following sets : * 'arkmcubl' This way, even if emulation isn't perfect, people can try them and report bugs. Stephh's log (2009.10.07) : - Added set : * 'block2' *************************************************************************** Stephh's notes on 'tetrsark' (based on the game Z80 code and some tests) : - No reads from 0xd00c, 0xd010 nor 0xd018. - "Cabinet" Dip Switch : * when set to "Upright" : . each player can join and play on its half screen while the other is already playing . the screen is never flipped * when set to "Cocktail" : . only one player can play : the other player has to wait until current player is "GAME OVER" to press the Start button . screen is flipped when player 2 is playing and it remains flipped until player 1 starts a game (so "demo mode" can be upside down) - Credits : even if display is limited to 9, the value still increases; so if you insert too many coins, it can be reset to 0 ! - Routines : * 0x56e3 : Play sound (input : register A) - to be confirmed ! - Adresses : * 0xc52b : credits * 0xc541 : ~(IN5) - test for coins "buttons" (code at 0x0232) * 0xc516 : ~(IN5) * 0xc517 : ~(IN4) - Known bugs : * Coins "buttons" don't work - we need to use fake BUTTON2 for each player **************************************************************************** HEXA This hardware is derived from Arkanoid's hardware. The 1986 date found in the roms probably comes from Arkanoid. This is a Columns style game and the original Columns wasn't released until 1990 and I find it hard to believe that this would pre-date Columns. driver by Howie Cohen Memory map (prelim) 0000 7fff ROM 8000 bfff bank switch rom space?? c000 c7ff RAM e000 e7ff video ram e800-efff unused RAM read: d001 AY8910 read f000 ??????? write: d000 AY8910 control d001 AY8910 write d008 bit0/1 = flip screen x/y bit 4 = ROM bank?? bit 5 = char bank other bits???????? d010 watchdog reset, or IRQ acknowledge, or both f000 ???????? main hardware consists of..... sub board with Z80 x2, 2 ROMs and a scratched 18 pin chip (probably a PIC) main board has.... 12MHz xtal ay3-8910 8 position DSW x1 ROMs x4 6116 SRAM x3 82S123 PROMs x3 *************************************************************************** DIP locations verified for: - arkanoidj - arkanoid ***************************************************************************/ #include "emu.h" #include "cpu/z80/z80.h" #include "includes/arkanoid.h" #include "sound/ay8910.h" #include "cpu/m6805/m6805.h" /***************************************************************************/ /* Memory Maps */ static ADDRESS_MAP_START( arkanoid_map, AS_PROGRAM, 8 ) AM_RANGE(0x0000, 0xbfff) AM_ROM AM_RANGE(0xc000, 0xc7ff) AM_RAM AM_RANGE(0xd000, 0xd001) AM_DEVWRITE("aysnd", ay8910_address_data_w) AM_RANGE(0xd001, 0xd001) AM_DEVREAD("aysnd", ay8910_r) AM_RANGE(0xd008, 0xd008) AM_WRITE(arkanoid_d008_w) /* gfx bank, flip screen etc. */ AM_RANGE(0xd00c, 0xd00c) AM_READ_PORT("SYSTEM") /* 2 bits from the 68705 */ AM_RANGE(0xd010, 0xd010) AM_READ_PORT("BUTTONS") AM_WRITE(watchdog_reset_w) AM_RANGE(0xd018, 0xd018) AM_READWRITE(arkanoid_Z80_mcu_r, arkanoid_Z80_mcu_w) /* input from the 68705 */ AM_RANGE(0xe000, 0xe7ff) AM_RAM_WRITE(arkanoid_videoram_w) AM_BASE_MEMBER(arkanoid_state, m_videoram) AM_RANGE(0xe800, 0xe83f) AM_RAM AM_BASE_SIZE_MEMBER(arkanoid_state, m_spriteram, m_spriteram_size) AM_RANGE(0xe840, 0xefff) AM_RAM AM_RANGE(0xf000, 0xffff) AM_READNOP /* fixes instant death in final level */ ADDRESS_MAP_END static ADDRESS_MAP_START( bootleg_map, AS_PROGRAM, 8 ) AM_RANGE(0x0000, 0xbfff) AM_ROM AM_RANGE(0xc000, 0xc7ff) AM_RAM AM_RANGE(0xd000, 0xd000) AM_DEVWRITE("aysnd", ay8910_address_w) AM_RANGE(0xd001, 0xd001) AM_DEVREADWRITE("aysnd", ay8910_r, ay8910_data_w) AM_RANGE(0xd008, 0xd008) AM_WRITE(arkanoid_d008_w) /* gfx bank, flip screen etc. */ AM_RANGE(0xd00c, 0xd00c) AM_READ_PORT("SYSTEM") AM_RANGE(0xd010, 0xd010) AM_READ_PORT("BUTTONS") AM_WRITE(watchdog_reset_w) AM_RANGE(0xd018, 0xd018) AM_READ_PORT("MUX") AM_WRITENOP AM_RANGE(0xe000, 0xe7ff) AM_RAM_WRITE(arkanoid_videoram_w) AM_BASE_MEMBER(arkanoid_state, m_videoram) AM_RANGE(0xe800, 0xe83f) AM_RAM AM_BASE_SIZE_MEMBER(arkanoid_state, m_spriteram, m_spriteram_size) AM_RANGE(0xe840, 0xefff) AM_RAM AM_RANGE(0xf000, 0xffff) AM_READNOP /* fixes instant death in final level */ ADDRESS_MAP_END static ADDRESS_MAP_START( hexa_map, AS_PROGRAM, 8 ) AM_RANGE(0x0000, 0x7fff) AM_ROM AM_RANGE(0x8000, 0xbfff) AM_ROMBANK("bank1") AM_RANGE(0xc000, 0xc7ff) AM_RAM AM_RANGE(0xd001, 0xd001) AM_DEVREAD("aysnd", ay8910_r) AM_RANGE(0xd000, 0xd001) AM_DEVWRITE("aysnd", ay8910_address_data_w) AM_RANGE(0xd008, 0xd008) AM_WRITE(hexa_d008_w) AM_RANGE(0xd010, 0xd010) AM_WRITE(watchdog_reset_w) /* or IRQ acknowledge, or both */ AM_RANGE(0xe000, 0xe7ff) AM_RAM_WRITE(arkanoid_videoram_w) AM_BASE_SIZE_MEMBER(arkanoid_state, m_videoram, m_videoram_size) ADDRESS_MAP_END static ADDRESS_MAP_START( brixian_map, AS_PROGRAM, 8 ) AM_RANGE(0x0000, 0xbfff) AM_ROM AM_RANGE(0xc000, 0xc7ff) AM_RAM AM_RANGE(0xd000, 0xd000) AM_DEVWRITE("aysnd", ay8910_address_w) AM_RANGE(0xd001, 0xd001) AM_DEVREADWRITE("aysnd", ay8910_r, ay8910_data_w) AM_RANGE(0xd008, 0xd008) AM_WRITE(arkanoid_d008_w) /* gfx bank, flip screen etc. */ AM_RANGE(0xd00c, 0xd00c) AM_READ_PORT("SYSTEM") AM_RANGE(0xd010, 0xd010) AM_READ_PORT("BUTTONS") AM_WRITE(watchdog_reset_w) AM_RANGE(0xd018, 0xd018) AM_READ_PORT("MUX") AM_WRITENOP AM_RANGE(0xe000, 0xe7ff) AM_RAM_WRITE(arkanoid_videoram_w) AM_BASE_MEMBER(arkanoid_state, m_videoram) AM_RANGE(0xe800, 0xe83f) AM_RAM AM_BASE_SIZE_MEMBER(arkanoid_state, m_spriteram, m_spriteram_size) AM_RANGE(0xe840, 0xefff) AM_RAM AM_RANGE(0xf000, 0xffff) AM_READNOP /* fixes instant death in final level */ // Interesting locations: // c105=0a @ title displays each piece // c110=01 - Title, 02 - Start Game, 04 - Select Stage ADDRESS_MAP_END static ADDRESS_MAP_START( mcu_map, AS_PROGRAM, 8 ) ADDRESS_MAP_GLOBAL_MASK(0x7ff) AM_RANGE(0x0000, 0x0000) AM_READWRITE(arkanoid_68705_port_a_r, arkanoid_68705_port_a_w) AM_RANGE(0x0001, 0x0001) AM_READ_PORT("MUX") AM_RANGE(0x0002, 0x0002) AM_READWRITE(arkanoid_68705_port_c_r, arkanoid_68705_port_c_w) AM_RANGE(0x0004, 0x0004) AM_WRITE(arkanoid_68705_ddr_a_w) AM_RANGE(0x0006, 0x0006) AM_WRITE(arkanoid_68705_ddr_c_w) AM_RANGE(0x0010, 0x007f) AM_RAM AM_RANGE(0x0080, 0x07ff) AM_ROM ADDRESS_MAP_END /***************************************************************************/ /* Input Ports */ static INPUT_PORTS_START( arkanoid ) PORT_START("SYSTEM") PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_START1 ) PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_START2 ) PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_SERVICE1 ) PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_TILT ) PORT_BIT( 0x10, IP_ACTIVE_HIGH, IPT_COIN1 ) PORT_BIT( 0x20, IP_ACTIVE_HIGH, IPT_COIN2 ) PORT_BIT( 0xc0, IP_ACTIVE_HIGH, IPT_SPECIAL ) PORT_CUSTOM(arkanoid_68705_input_r, NULL) /* Inputs from the 68705 */ PORT_START("BUTTONS") PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_BUTTON1 ) PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_UNKNOWN ) PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_BUTTON1 ) PORT_COCKTAIL PORT_BIT( 0xf8, IP_ACTIVE_LOW, IPT_UNKNOWN ) PORT_START("MUX") PORT_BIT( 0xff, IP_ACTIVE_HIGH, IPT_SPECIAL ) PORT_CUSTOM(arkanoid_input_mux, "P1\0P2") PORT_START("DSW") PORT_DIPNAME( 0x01, 0x00, DEF_STR( Allow_Continue ) ) PORT_DIPLOCATION("SW1:8") PORT_DIPSETTING( 0x01, DEF_STR( No ) ) PORT_DIPSETTING( 0x00, DEF_STR( Yes ) ) PORT_DIPNAME( 0x02, 0x02, DEF_STR( Flip_Screen ) ) PORT_DIPLOCATION("SW1:7") PORT_DIPSETTING( 0x02, DEF_STR( Off ) ) PORT_DIPSETTING( 0x00, DEF_STR( On ) ) PORT_SERVICE_DIPLOC(0x04, IP_ACTIVE_LOW, "SW1:6" ) PORT_DIPNAME( 0x08, 0x08, DEF_STR( Difficulty ) ) PORT_DIPLOCATION("SW1:5") PORT_DIPSETTING( 0x08, DEF_STR( Easy ) ) PORT_DIPSETTING( 0x00, DEF_STR( Hard ) ) PORT_DIPNAME( 0x10, 0x10, DEF_STR( Bonus_Life ) ) PORT_DIPLOCATION("SW1:4") PORT_DIPSETTING( 0x10, "20K 60K 60K+" ) PORT_DIPSETTING( 0x00, "20K" ) PORT_DIPNAME( 0x20, 0x20, DEF_STR( Lives ) ) PORT_DIPLOCATION("SW1:3") /* Table at 0x9a28 */ PORT_DIPSETTING( 0x20, "3" ) PORT_DIPSETTING( 0x00, "5" ) PORT_DIPNAME( 0xc0, 0xc0, DEF_STR( Coinage ) ) PORT_DIPLOCATION("SW1:1,2") /* Table at 0x0328 */ PORT_DIPSETTING( 0x40, DEF_STR( 2C_1C ) ) PORT_DIPSETTING( 0xc0, DEF_STR( 1C_1C ) ) PORT_DIPSETTING( 0x80, DEF_STR( 1C_2C ) ) PORT_DIPSETTING( 0x00, DEF_STR( 1C_6C ) ) PORT_START("UNUSED") /* This is read in ay8910_interface */ PORT_BIT( 0xff, IP_ACTIVE_LOW, IPT_UNUSED ) PORT_START("P1") /* Spinner Player 1 */ PORT_BIT( 0xff, 0x00, IPT_DIAL ) PORT_SENSITIVITY(30) PORT_KEYDELTA(15) PORT_START("P2") /* Spinner Player 2 */ PORT_BIT( 0xff, 0x00, IPT_DIAL ) PORT_SENSITIVITY(30) PORT_KEYDELTA(15) PORT_COCKTAIL INPUT_PORTS_END /* Different coinage and additional "Cabinet" Dip Switch */ static INPUT_PORTS_START( arkanoidj ) PORT_INCLUDE( arkanoid ) PORT_MODIFY("DSW") PORT_DIPNAME( 0x40, 0x40, DEF_STR( Coinage ) ) PORT_DIPLOCATION("SW1:2") /* Table at 0x0320 */ PORT_DIPSETTING( 0x40, DEF_STR( 1C_1C ) ) PORT_DIPSETTING( 0x00, DEF_STR( 1C_2C ) ) PORT_DIPNAME( 0x80, 0x00, DEF_STR( Cabinet ) ) PORT_DIPLOCATION("SW1:1") PORT_DIPSETTING( 0x00, DEF_STR( Upright ) ) PORT_DIPSETTING( 0x80, DEF_STR( Cocktail ) ) INPUT_PORTS_END static INPUT_PORTS_START( ark1ball ) PORT_INCLUDE( arkanoidj ) PORT_MODIFY("DSW") PORT_DIPNAME( 0x10, 0x10, DEF_STR( Bonus_Life ) ) PORT_DIPLOCATION("SW1:4") /* "ld a,$60" at 0x93bd and "ld a,$60" at 0x9c7f and 0x9c9b */ PORT_DIPSETTING( 0x10, "60K 100K 60K+" ) PORT_DIPSETTING( 0x00, "60K" ) PORT_DIPNAME( 0x20, 0x20, DEF_STR( Lives ) ) PORT_DIPLOCATION("SW1:3") /* Table at 0x9a28 */ PORT_DIPSETTING( 0x20, "1" ) PORT_DIPSETTING( 0x00, "2" ) INPUT_PORTS_END /* Bootlegs do not read from the MCU */ static INPUT_PORTS_START( arkatayt ) PORT_INCLUDE( arkanoidj ) PORT_MODIFY("SYSTEM") PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_SPECIAL ) /* Some bootlegs need it to be 1 */ PORT_BIT( 0x80, IP_ACTIVE_HIGH, IPT_SPECIAL ) /* Some bootlegs need it to be 0 */ INPUT_PORTS_END static INPUT_PORTS_START( arkangc ) PORT_INCLUDE( arkatayt ) PORT_MODIFY("DSW") PORT_DIPNAME( 0x01, 0x01, "Ball Speed" ) PORT_DIPLOCATION("SW1:8") /* Speed at 0xc462 (code at 0x18aa) - Also affects level 2 (code at 0x7b82) */ PORT_DIPSETTING( 0x01, DEF_STR( Normal ) ) /* 0xc462 = 0x06 - Normal level 2 */ PORT_DIPSETTING( 0x00, "Faster" ) /* 0xc462 = 0x08 - Level 2 same as level 30 */ INPUT_PORTS_END static INPUT_PORTS_START( arkangc2 ) PORT_INCLUDE( arkatayt ) PORT_MODIFY("DSW") PORT_DIPNAME( 0x01, 0x01, "Ball Speed" ) PORT_DIPLOCATION("SW1:8") /* Speed at 0xc462 (code at 0x18aa) - Also affects level 2 (code at 0x7b82) */ PORT_DIPSETTING( 0x01, "Slower" ) /* 0xc462 = 0x04 - Normal level 2 */ PORT_DIPSETTING( 0x00, DEF_STR ( Normal ) ) /* 0xc462 = 0x06 - Level 2 same as level 30 */ INPUT_PORTS_END static INPUT_PORTS_START( block2 ) PORT_INCLUDE( arkatayt ) PORT_MODIFY("DSW") PORT_DIPUNUSED_DIPLOC( 0x01, 0x01, "SW1:8" ) /* Speed at 0xc462 (code at 0x06fc) : always = 0x06 */ INPUT_PORTS_END static INPUT_PORTS_START( arkgcbl ) PORT_INCLUDE( arkatayt ) PORT_MODIFY("DSW") PORT_DIPNAME( 0x01, 0x00, "Round Select" ) PORT_DIPLOCATION("SW1:8") /* Check code at 0x7bc2 - Speed at 0xc462 (code at 0x18aa) */ PORT_DIPSETTING( 0x01, DEF_STR( Off ) ) /* 0xc462 = 0x06 */ PORT_DIPSETTING( 0x00, DEF_STR( On ) ) /* 0xc462 = 0x06 */ PORT_DIPNAME( 0x10, 0x10, DEF_STR( Bonus_Life ) ) PORT_DIPLOCATION("SW1:4") /* "ld a,$60" at 0x93bd and "ld a,$20" at 0x9c7f and 0x9c9b */ PORT_DIPSETTING( 0x10, "60K 100K 60K+" ) /* But "20K 60K 60K+" when continue */ PORT_DIPSETTING( 0x00, "60K" ) /* But "20K" when continue */ PORT_DIPNAME( 0x20, 0x20, DEF_STR( Lives ) ) PORT_DIPLOCATION("SW1:3") PORT_DIPSETTING( 0x00, "2" ) PORT_DIPSETTING( 0x20, "3" ) PORT_DIPUNUSED_DIPLOC( 0x40, 0x40, "SW1:2" ) /* Always 2C_1C - check code at 0x7d5e */ INPUT_PORTS_END static INPUT_PORTS_START( paddle2 ) PORT_INCLUDE( arkatayt ) PORT_MODIFY("DSW") PORT_DIPNAME( 0x01, 0x00, "Round Select" ) PORT_DIPLOCATION("SW1:8") /* Check code at 0x7bc2 - Speed at 0xc462 (code at 0x18aa) */ PORT_DIPSETTING( 0x01, DEF_STR( Off ) ) /* 0xc462 = 0x06 */ PORT_DIPSETTING( 0x00, DEF_STR( On ) ) /* 0xc462 = 0x06 */ PORT_DIPNAME( 0x04, 0x04, "Controls ?" ) PORT_DIPLOCATION("SW1:6") /* Check code at 0x96a1 and read notes */ PORT_DIPSETTING( 0x04, DEF_STR( Normal ) ) PORT_DIPSETTING( 0x00, DEF_STR( Alternate ) ) PORT_DIPNAME( 0x10, 0x10, DEF_STR( Bonus_Life ) ) PORT_DIPLOCATION("SW1:4") /* "ld a,$60" at 0x93bd and "ld a,$20" at 0x9c7f and 0x9c9b */ PORT_DIPSETTING( 0x10, "60K 100K 60K+" ) /* But "20K 60K 60K+" when continue */ PORT_DIPSETTING( 0x00, "60K" ) /* But "20K" when continue */ PORT_DIPNAME( 0x20, 0x20, DEF_STR( Lives ) ) PORT_DIPLOCATION("SW1:3") /* Table at 0x9a28 */ PORT_DIPSETTING( 0x00, "2" ) PORT_DIPSETTING( 0x20, "3" ) INPUT_PORTS_END static INPUT_PORTS_START( arktayt2 ) PORT_INCLUDE( arkatayt ) PORT_MODIFY("DSW") PORT_DIPNAME( 0x10, 0x10, DEF_STR( Bonus_Life ) ) PORT_DIPLOCATION("SW1:4") /* "ld a,$60" at 0x93bd and "ld a,$60" at 0x9c7f and 0x9c9b */ PORT_DIPSETTING( 0x10, "60K 100K 60K+" ) PORT_DIPSETTING( 0x00, "60K" ) PORT_DIPNAME( 0x20, 0x20, DEF_STR( Lives ) ) PORT_DIPLOCATION("SW1:3") /* Table at 0x9a28 */ PORT_DIPSETTING( 0x20, "2" ) PORT_DIPSETTING( 0x00, "3" ) PORT_DIPNAME( 0x40, 0x40, DEF_STR( Coinage ) ) PORT_DIPLOCATION("SW1:2") /* Table at 0x0320 */ PORT_DIPSETTING( 0x00, DEF_STR( 2C_1C ) ) PORT_DIPSETTING( 0x40, DEF_STR( 1C_1C ) ) INPUT_PORTS_END static INPUT_PORTS_START( tetrsark ) PORT_START("SYSTEM") PORT_BIT( 0xff, IP_ACTIVE_LOW, IPT_UNUSED ) PORT_START("BUTTONS") PORT_BIT( 0xff, IP_ACTIVE_LOW, IPT_UNUSED ) PORT_START("MUX") PORT_BIT( 0xff, IP_ACTIVE_LOW, IPT_UNUSED ) /* Inputs are read by the ay8910. For simplicity, we use tags from other sets (even if not appropriate) */ PORT_START("DSW") PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_JOYSTICK_DOWN ) PORT_PLAYER(2) PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_JOYSTICK_LEFT ) PORT_PLAYER(2) PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_JOYSTICK_RIGHT ) PORT_PLAYER(2) PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_BUTTON1 ) PORT_PLAYER(2) // or up? it rotates the piece. PORT_DIPNAME( 0x10, 0x10, DEF_STR( Cabinet ) ) /* Also affects numbers of players - read notes */ PORT_DIPSETTING( 0x10, DEF_STR( Upright ) ) PORT_DIPSETTING( 0x00, DEF_STR( Cocktail ) ) PORT_DIPNAME( 0x20, 0x00, DEF_STR( Demo_Sounds ) ) PORT_DIPSETTING( 0x20, DEF_STR( Off ) ) PORT_DIPSETTING( 0x00, DEF_STR( On ) ) PORT_DIPNAME( 0xc0, 0xc0, DEF_STR( Coinage ) ) /* Table at 0x0207 */ PORT_DIPSETTING( 0xc0, DEF_STR( 1C_1C ) ) PORT_DIPSETTING( 0x80, DEF_STR( 1C_2C ) ) PORT_DIPSETTING( 0x40, DEF_STR( 1C_3C ) ) PORT_DIPSETTING( 0x00, DEF_STR( 1C_5C ) ) PORT_START("UNUSED") PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_JOYSTICK_DOWN ) PORT_PLAYER(1) PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_JOYSTICK_LEFT ) PORT_PLAYER(1) PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_JOYSTICK_RIGHT ) PORT_PLAYER(1) PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_BUTTON1 ) PORT_PLAYER(1) // or up? it rotates the piece. PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_START1 ) PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_START2 ) PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_COIN1 ) PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_COIN2 ) INPUT_PORTS_END static INPUT_PORTS_START( hexa ) PORT_START("INPUTS") PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_JOYSTICK_UP ) PORT_4WAY PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_JOYSTICK_DOWN ) PORT_4WAY PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_JOYSTICK_LEFT ) PORT_4WAY PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_JOYSTICK_RIGHT ) PORT_4WAY PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_BUTTON1 ) PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_START1 ) PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_COIN1 ) PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_BUTTON2 ) PORT_START("DSW") PORT_DIPNAME( 0x03, 0x03, DEF_STR( Coinage ) ) PORT_DIPLOCATION("SW1:1,2") PORT_DIPSETTING( 0x00, DEF_STR( 3C_1C ) ) PORT_DIPSETTING( 0x01, DEF_STR( 2C_1C ) ) PORT_DIPSETTING( 0x03, DEF_STR( 1C_1C ) ) PORT_DIPSETTING( 0x02, DEF_STR( 1C_2C ) ) PORT_DIPNAME( 0x04, 0x00, "Naughty Pics" ) PORT_DIPLOCATION("SW1:3") PORT_DIPSETTING( 0x04, DEF_STR( Off ) ) PORT_DIPSETTING( 0x00, DEF_STR( On ) ) PORT_DIPNAME( 0x08, 0x08, DEF_STR( Flip_Screen ) ) PORT_DIPLOCATION("SW1:4") PORT_DIPSETTING( 0x08, DEF_STR( Off ) ) PORT_DIPSETTING( 0x00, DEF_STR( On ) ) PORT_DIPNAME( 0x30, 0x30, "Difficulty?" ) PORT_DIPLOCATION("SW1:5,6") PORT_DIPSETTING( 0x30, "Easy?" ) PORT_DIPSETTING( 0x20, "Medium?" ) PORT_DIPSETTING( 0x10, "Hard?" ) PORT_DIPSETTING( 0x00, "Hardest?" ) PORT_DIPNAME( 0x40, 0x40, "Pobys" ) PORT_DIPLOCATION("SW1:7") PORT_DIPSETTING( 0x40, "2" ) PORT_DIPSETTING( 0x00, "4" ) PORT_DIPNAME( 0x80, 0x80, DEF_STR( Demo_Sounds ) ) PORT_DIPLOCATION("SW1:8") PORT_DIPSETTING( 0x00, DEF_STR( Off ) ) PORT_DIPSETTING( 0x80, DEF_STR( On ) ) INPUT_PORTS_END static INPUT_PORTS_START( brixian ) PORT_START("SYSTEM") PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_UNKNOWN ) PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_UNKNOWN ) PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_UNKNOWN ) PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_UNKNOWN ) PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_UNKNOWN ) PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_UNKNOWN ) PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_COIN2 ) PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_COIN1 ) PORT_START("BUTTONS") PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_START1 ) PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_JOYSTICK_UP ) PORT_4WAY PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_JOYSTICK_DOWN ) PORT_4WAY PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_JOYSTICK_LEFT ) PORT_4WAY PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_JOYSTICK_RIGHT ) PORT_4WAY PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_BUTTON1 ) PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_BUTTON2 ) PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_BUTTON3 ) PORT_START("MUX") PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_START2 ) PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_JOYSTICK_UP ) PORT_4WAY PORT_PLAYER(2) PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_JOYSTICK_DOWN ) PORT_4WAY PORT_PLAYER(2) PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_JOYSTICK_LEFT ) PORT_4WAY PORT_PLAYER(2) PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_JOYSTICK_RIGHT ) PORT_4WAY PORT_PLAYER(2) PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_BUTTON1 ) PORT_PLAYER(2) PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_BUTTON2 ) PORT_PLAYER(2) PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_BUTTON3 ) PORT_PLAYER(2) PORT_START("DSW") PORT_DIPNAME( 0x0f, 0x01, DEF_STR( Lives ) ) PORT_DIPLOCATION("SW1:1,2,3,4") PORT_DIPSETTING( 0x00, "2" ) PORT_DIPSETTING( 0x01, "3" ) PORT_DIPSETTING( 0x03, "4" ) PORT_DIPSETTING( 0x07, "5" ) PORT_DIPSETTING( 0x0f, "6" ) PORT_DIPNAME( 0x30, 0x00, "Speed of Elevator" ) PORT_DIPLOCATION("SW1:5,6") PORT_DIPSETTING( 0x00, "Slow" ) PORT_DIPSETTING( 0x30, "Fast" ) PORT_DIPNAME( 0xc0, 0x40, "Time Left" ) PORT_DIPLOCATION("SW1:7,8") PORT_DIPSETTING( 0x00, "Half" ) PORT_DIPSETTING( 0x40, DEF_STR( Normal ) ) PORT_DIPSETTING( 0xc0, "Double" ) PORT_START("UNUSED") PORT_BIT( 0xff, IP_ACTIVE_LOW, IPT_UNUSED ) INPUT_PORTS_END /***************************************************************************/ /* Graphics Layouts */ static const gfx_layout charlayout = { 8,8, /* 8*8 characters */ 4096, /* 4096 characters */ 3, /* 3 bits per pixel */ { 2*4096*8*8, 4096*8*8, 0 }, /* the two bitplanes are separated */ { 0, 1, 2, 3, 4, 5, 6, 7 }, { 0*8, 1*8, 2*8, 3*8, 4*8, 5*8, 6*8, 7*8 }, 8*8 /* every char takes 8 consecutive bytes */ }; /* Graphics Decode Information */ static GFXDECODE_START( arkanoid ) GFXDECODE_ENTRY( "gfx1", 0, charlayout, 0, 64 ) // sprites use the same characters above, but are 16x8 GFXDECODE_END static GFXDECODE_START( hexa ) GFXDECODE_ENTRY( "gfx1", 0x0000, charlayout, 0 , 32 ) GFXDECODE_END /* Sound Interfaces */ static const ay8910_interface ay8910_config = { AY8910_LEGACY_OUTPUT, AY8910_DEFAULT_LOADS, DEVCB_INPUT_PORT("UNUSED"), DEVCB_INPUT_PORT("DSW"), DEVCB_NULL, DEVCB_NULL }; static const ay8910_interface hexa_ay8910_config = { AY8910_LEGACY_OUTPUT, AY8910_DEFAULT_LOADS, DEVCB_INPUT_PORT("INPUTS"), DEVCB_INPUT_PORT("DSW"), DEVCB_NULL, DEVCB_NULL }; /* Machine Drivers */ static MACHINE_START( arkanoid ) { arkanoid_state *state = machine.driver_data(); state->m_mcu = machine.device("mcu"); state->save_item(NAME(state->m_bootleg_cmd)); state->save_item(NAME(state->m_paddle_select)); state->save_item(NAME(state->m_z80write)); state->save_item(NAME(state->m_fromz80)); state->save_item(NAME(state->m_m68705write)); state->save_item(NAME(state->m_toz80)); state->save_item(NAME(state->m_port_a_in)); state->save_item(NAME(state->m_port_a_out)); state->save_item(NAME(state->m_ddr_a)); state->save_item(NAME(state->m_port_c_out)); state->save_item(NAME(state->m_ddr_c)); state->save_item(NAME(state->m_gfxbank)); state->save_item(NAME(state->m_palettebank)); } static MACHINE_RESET( arkanoid ) { arkanoid_state *state = machine.driver_data(); state->m_port_a_in = 0; state->m_port_a_out = 0; state->m_z80write = 0; state->m_m68705write = 0; state->m_bootleg_cmd = 0; state->m_paddle_select = 0; state->m_fromz80 = 0; state->m_toz80 = 0; state->m_ddr_a = 0; state->m_ddr_c = 0; state->m_port_c_out = 0; state->m_gfxbank = 0; state->m_palettebank = 0; } static MACHINE_CONFIG_START( arkanoid, arkanoid_state ) /* basic machine hardware */ MCFG_CPU_ADD("maincpu", Z80, XTAL_12MHz/2) /* verified on pcb */ MCFG_CPU_PROGRAM_MAP(arkanoid_map) MCFG_CPU_VBLANK_INT("screen", irq0_line_hold) MCFG_CPU_ADD("mcu", M68705, XTAL_12MHz/4) /* verified on pcb */ MCFG_CPU_PROGRAM_MAP(mcu_map) MCFG_QUANTUM_TIME(attotime::from_hz(6000)) // 100 CPU slices per second to synchronize between the MCU and the main CPU MCFG_MACHINE_START(arkanoid) MCFG_MACHINE_RESET(arkanoid) /* video hardware */ MCFG_SCREEN_ADD("screen", RASTER) MCFG_SCREEN_REFRESH_RATE(60) MCFG_SCREEN_VBLANK_TIME(ATTOSECONDS_IN_USEC(0)) MCFG_SCREEN_FORMAT(BITMAP_FORMAT_INDEXED16) MCFG_SCREEN_SIZE(32*8, 32*8) MCFG_SCREEN_VISIBLE_AREA(0*8, 32*8-1, 2*8, 30*8-1) MCFG_SCREEN_UPDATE(arkanoid) MCFG_GFXDECODE(arkanoid) MCFG_PALETTE_LENGTH(512) MCFG_PALETTE_INIT(RRRR_GGGG_BBBB) MCFG_VIDEO_START(arkanoid) /* sound hardware */ MCFG_SPEAKER_STANDARD_MONO("mono") MCFG_SOUND_ADD("aysnd", YM2149, XTAL_12MHz/4/2) /* YM2149 clock is 3mhz, pin 26 is low so 3mhz/2 */ MCFG_SOUND_CONFIG(ay8910_config) MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 0.33) MACHINE_CONFIG_END static MACHINE_CONFIG_START( hexa, arkanoid_state ) /* basic machine hardware */ MCFG_CPU_ADD("maincpu", Z80, XTAL_12MHz/2) /* Imported from arkanoid - correct? */ MCFG_CPU_PROGRAM_MAP(hexa_map) MCFG_CPU_VBLANK_INT("screen", irq0_line_hold) MCFG_MACHINE_START(arkanoid) MCFG_MACHINE_RESET(arkanoid) /* video hardware */ MCFG_SCREEN_ADD("screen", RASTER) MCFG_SCREEN_REFRESH_RATE(60) MCFG_SCREEN_VBLANK_TIME(ATTOSECONDS_IN_USEC(0)) MCFG_SCREEN_FORMAT(BITMAP_FORMAT_INDEXED16) MCFG_SCREEN_SIZE(32*8, 32*8) MCFG_SCREEN_VISIBLE_AREA(0*8, 32*8-1, 2*8, 30*8-1) MCFG_SCREEN_UPDATE(hexa) MCFG_GFXDECODE(hexa) MCFG_PALETTE_LENGTH(256) MCFG_PALETTE_INIT(RRRR_GGGG_BBBB) MCFG_VIDEO_START(arkanoid) /* sound hardware */ MCFG_SPEAKER_STANDARD_MONO("mono") MCFG_SOUND_ADD("aysnd", AY8910, XTAL_12MHz/4/2) /* Imported from arkanoid - correct? */ MCFG_SOUND_CONFIG(hexa_ay8910_config) MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 0.50) MACHINE_CONFIG_END static MACHINE_CONFIG_DERIVED( bootleg, arkanoid ) /* basic machine hardware */ MCFG_CPU_MODIFY("maincpu") MCFG_CPU_PROGRAM_MAP(bootleg_map) MCFG_DEVICE_REMOVE("mcu") MACHINE_CONFIG_END // todo static MACHINE_CONFIG_DERIVED( brixian, arkanoid ) /* basic machine hardware */ MCFG_CPU_MODIFY("maincpu") MCFG_CPU_PROGRAM_MAP(brixian_map) MCFG_CPU_VBLANK_INT("screen", irq0_line_hold) MCFG_DEVICE_REMOVE("mcu") MACHINE_CONFIG_END /***************************************************************************/ /* ROMs */ ROM_START( arkanoid ) ROM_REGION( 0x10000, "maincpu", 0 ) ROM_LOAD( "a75-01-1.ic17", 0x0000, 0x8000, CRC(5bcda3b0) SHA1(52cadd38b5f8e8856f007a9c602d6b508f30be65) ) ROM_LOAD( "a75-11.ic16", 0x8000, 0x8000, CRC(eafd7191) SHA1(d2f8843b716718b1de209e97a874e8ce600f3f87) ) ROM_REGION( 0x0800, "mcu", 0 ) /* 2k for the microcontroller */ ROM_LOAD( "arkanoid.ic14", 0x0000, 0x0800, CRC(515d77b6) SHA1(a302937683d11f663abd56a2fd7c174374e4d7fb) ) /* The real MCU should be A75-06 @ IC14 */ ROM_REGION( 0x18000, "gfx1", 0 ) ROM_LOAD( "a75-03.ic64", 0x00000, 0x8000, CRC(038b74ba) SHA1(ac053cc4908b4075f918748b89570e07a0ba5116) ) ROM_LOAD( "a75-04.ic63", 0x08000, 0x8000, CRC(71fae199) SHA1(5d253c46ccf4cd2976a5fb8b8713f0f345443d06) ) ROM_LOAD( "a75-05.ic62", 0x10000, 0x8000, CRC(c76374e2) SHA1(7520dd48de20db60a2038f134dcaa454988e7874) ) ROM_REGION( 0x0600, "proms", 0 ) /* BPROMs are silkscreened as 7621, actual BPROMs used are MMI 6306-1N */ ROM_LOAD( "a75-07.ic24", 0x0000, 0x0200, CRC(0af8b289) SHA1(6bc589e8a609b4cf450aebedc8ce02d5d45c970f) ) /* red component */ ROM_LOAD( "a75-08.ic23", 0x0200, 0x0200, CRC(abb002fb) SHA1(c14f56b8ef103600862e7930709d293b0aa97a73) ) /* green component */ ROM_LOAD( "a75-09.ic22", 0x0400, 0x0200, CRC(a7c6c277) SHA1(adaa003dcd981576ea1cc5f697d709b2d6b2ea29) ) /* blue component */ // these were decapped, sort them! ROM_REGION( 0x0800, "alt_mcus", 0 ) /* 2k for the microcontroller */ ROM_LOAD( "arkanoid1_68705p3.ic14", 0x0000, 0x0800, CRC(1b68e2d8) SHA1(f642a7cb624ee14fb0e410de5ae1fc799d2fa1c2) ) // this is close to the supported MCU, is it a bootleg? ROM_LOAD( "arkanoid_mcu.ic14", 0x0000, 0x0800, CRC(4e44b50a) SHA1(c61e7d158dc8e2b003c8158053ec139b904599af) ) // this has a more genuine Programmed By Yasu 1986 string in it with 0x00 fill near the end ROM_LOAD( "arkanoid_68705p5.ic14", 0x0000, 0x0800, CRC(0be83647) SHA1(625fd1e6061123df612f115ef14a06cd6009f5d1) ) // same as above, but with 0xff fill ROM_END ROM_START( arkanoidu ) ROM_REGION( 0x10000, "maincpu", 0 ) ROM_LOAD( "a75-19.ic17", 0x0000, 0x8000, CRC(d3ad37d7) SHA1(a172a1ef5bb83ee2d8ed2842ef8968af19ad411e) ) ROM_LOAD( "a75-18.ic16", 0x8000, 0x8000, CRC(cdc08301) SHA1(05f54353cc8333af14fa985a2764960e20e8161a) ) ROM_REGION( 0x0800, "mcu", 0 ) /* 2k for the microcontroller */ ROM_LOAD( "arknoidu.ic14", 0x0000, 0x0800, BAD_DUMP CRC(de518e47) SHA1(b8eddd1c566505fb69e3d1207c7a9720dfb9f503) ) /* The real MCU should be A75-15 @ IC14?? */ ROM_REGION( 0x18000, "gfx1", 0 ) ROM_LOAD( "a75-03.ic64", 0x00000, 0x8000, CRC(038b74ba) SHA1(ac053cc4908b4075f918748b89570e07a0ba5116) ) ROM_LOAD( "a75-04.ic63", 0x08000, 0x8000, CRC(71fae199) SHA1(5d253c46ccf4cd2976a5fb8b8713f0f345443d06) ) ROM_LOAD( "a75-05.ic62", 0x10000, 0x8000, CRC(c76374e2) SHA1(7520dd48de20db60a2038f134dcaa454988e7874) ) ROM_REGION( 0x0600, "proms", 0 ) /* BPROMs are silkscreened as 7621, actual BPROMs used are MMI 6306-1N */ ROM_LOAD( "a75-07.ic24", 0x0000, 0x0200, CRC(0af8b289) SHA1(6bc589e8a609b4cf450aebedc8ce02d5d45c970f) ) /* red component */ ROM_LOAD( "a75-08.ic23", 0x0200, 0x0200, CRC(abb002fb) SHA1(c14f56b8ef103600862e7930709d293b0aa97a73) ) /* green component */ ROM_LOAD( "a75-09.ic22", 0x0400, 0x0200, CRC(a7c6c277) SHA1(adaa003dcd981576ea1cc5f697d709b2d6b2ea29) ) /* blue component */ ROM_END ROM_START( arkanoiduo ) ROM_REGION( 0x10000, "maincpu", 0 ) ROM_LOAD( "a75-01-1.ic17", 0x0000, 0x8000, CRC(5bcda3b0) SHA1(52cadd38b5f8e8856f007a9c602d6b508f30be65) ) ROM_LOAD( "a75-10.ic16", 0x8000, 0x8000, CRC(a1769e15) SHA1(fbb45731246a098b29eb08de5d63074b496aaaba) ) ROM_REGION( 0x0800, "mcu", 0 ) /* 2k for the microcontroller */ ROM_LOAD( "arkanoid.ic14", 0x0000, 0x0800, CRC(515d77b6) SHA1(a302937683d11f663abd56a2fd7c174374e4d7fb) ) /* The real MCU should be A75-06 @ IC14 */ ROM_REGION( 0x18000, "gfx1", 0 ) ROM_LOAD( "a75-03.ic64", 0x00000, 0x8000, CRC(038b74ba) SHA1(ac053cc4908b4075f918748b89570e07a0ba5116) ) ROM_LOAD( "a75-04.ic63", 0x08000, 0x8000, CRC(71fae199) SHA1(5d253c46ccf4cd2976a5fb8b8713f0f345443d06) ) ROM_LOAD( "a75-05.ic62", 0x10000, 0x8000, CRC(c76374e2) SHA1(7520dd48de20db60a2038f134dcaa454988e7874) ) ROM_REGION( 0x0600, "proms", 0 ) /* BPROMs are silkscreened as 7621, actual BPROMs used are MMI 6306-1N */ ROM_LOAD( "a75-07.ic24", 0x0000, 0x0200, CRC(0af8b289) SHA1(6bc589e8a609b4cf450aebedc8ce02d5d45c970f) ) /* red component */ ROM_LOAD( "a75-08.ic23", 0x0200, 0x0200, CRC(abb002fb) SHA1(c14f56b8ef103600862e7930709d293b0aa97a73) ) /* green component */ ROM_LOAD( "a75-09.ic23", 0x0400, 0x0200, CRC(a7c6c277) SHA1(adaa003dcd981576ea1cc5f697d709b2d6b2ea29) ) /* blue component */ ROM_END ROM_START( arkatour ) ROM_REGION( 0x10000, "maincpu", 0 ) ROM_LOAD( "a75-27.ic17", 0x0000, 0x8000, CRC(e3b8faf5) SHA1(4c09478fa41881fa89ee6afb676aeb780f17ac2e) ) ROM_LOAD( "a75-28.ic16", 0x8000, 0x8000, CRC(326aca4d) SHA1(5a194b7a0361236d471b24905dc6434372f81252) ) ROM_REGION( 0x0800, "mcu", 0 ) /* 2k for the microcontroller */ ROM_LOAD( "a75-32.ic14", 0x0000, 0x0800, BAD_DUMP CRC(d3249559) SHA1(b1542764450016614e9e03cedd6a2f1e59961789) ) ROM_REGION( 0x18000, "gfx1", 0 ) ROM_LOAD( "a75-29.ic64", 0x00000, 0x8000, CRC(5ddea3cf) SHA1(58f16515898b7cc2697bf7663a60d9ca0db6da95) ) ROM_LOAD( "a75-30.ic63", 0x08000, 0x8000, CRC(5fcf2e85) SHA1(f721f0afb0550cc64bff26681856a7576398d9b5) ) ROM_LOAD( "a75-31.ic62", 0x10000, 0x8000, CRC(7b76b192) SHA1(a68aa08717646a6c322cf3455df07f50df9e9f33) ) ROM_REGION( 0x0600, "proms", 0 ) /* BPROMs are silkscreened as 7621, actual BPROMs used are MMI 6306-1N */ ROM_LOAD( "a75-33.ic24", 0x0000, 0x0200, CRC(b4bf3c81) SHA1(519188937ac9728c653fabac877e37dc43c3f71a) ) /* red component */ ROM_LOAD( "a75-34.ic23", 0x0200, 0x0200, CRC(de85a803) SHA1(325214995996de36a0470fbfc00e4e393c0b17ad) ) /* green component */ ROM_LOAD( "a75-35.ic22", 0x0400, 0x0200, CRC(38acfd3b) SHA1(2841e9db047aa039eff8567a518b6250b355507b) ) /* blue component */ ROM_END ROM_START( arkanoidj ) ROM_REGION( 0x10000, "maincpu", 0 ) ROM_LOAD( "a75-21.ic17", 0x0000, 0x8000, CRC(bf0455fc) SHA1(250522b84b9f491c3f4efc391bf6aa6124361369) ) ROM_LOAD( "a75-22.ic16", 0x8000, 0x8000, CRC(3a2688d3) SHA1(9633a661352def3d85f95ca830f6d761b0b5450e) ) ROM_REGION( 0x0800, "mcu", 0 ) /* 2k for the microcontroller */ ROM_LOAD( "arknoidj.uc", 0x0000, 0x0800, BAD_DUMP CRC(0a4abef6) SHA1(fdce0b7a2eab7fd4f1f4fc3b93120b1ebc16078e) ) ROM_REGION( 0x18000, "gfx1", 0 ) ROM_LOAD( "a75-03.ic64", 0x00000, 0x8000, CRC(038b74ba) SHA1(ac053cc4908b4075f918748b89570e07a0ba5116) ) ROM_LOAD( "a75-04.ic63", 0x08000, 0x8000, CRC(71fae199) SHA1(5d253c46ccf4cd2976a5fb8b8713f0f345443d06) ) ROM_LOAD( "a75-05.ic62", 0x10000, 0x8000, CRC(c76374e2) SHA1(7520dd48de20db60a2038f134dcaa454988e7874) ) ROM_REGION( 0x0600, "proms", 0 ) /* BPROMs are silkscreened as 7621, actual BPROMs used are MMI 6306-1N */ ROM_LOAD( "a75-07.ic24", 0x0000, 0x0200, CRC(0af8b289) SHA1(6bc589e8a609b4cf450aebedc8ce02d5d45c970f) ) /* red component */ ROM_LOAD( "a75-08.ic23", 0x0200, 0x0200, CRC(abb002fb) SHA1(c14f56b8ef103600862e7930709d293b0aa97a73) ) /* green component */ ROM_LOAD( "a75-09.ic22", 0x0400, 0x0200, CRC(a7c6c277) SHA1(adaa003dcd981576ea1cc5f697d709b2d6b2ea29) ) /* blue component */ ROM_END ROM_START( arkmcubl ) ROM_REGION( 0x10000, "maincpu", 0 ) ROM_LOAD( "e1.6d", 0x0000, 0x8000, CRC(dd4f2b72) SHA1(399a8636030a702dafc1da926f115df6f045bef1) ) ROM_LOAD( "e2.6f", 0x8000, 0x8000, CRC(bbc33ceb) SHA1(e9b6fef98d0d20e77c7a1c25eff8e9a8c668a258) ) /* MCU from the World early version ('arkanoid'), so the game is playable */ ROM_REGION( 0x0800, "mcu", 0 ) /* 2k for the microcontroller */ ROM_LOAD( "arkmcubl.uc", 0x0000, 0x0800, BAD_DUMP CRC(515d77b6) SHA1(a302937683d11f663abd56a2fd7c174374e4d7fb) ) ROM_REGION( 0x18000, "gfx1", 0 ) ROM_LOAD( "a75-03.rom", 0x00000, 0x8000, CRC(038b74ba) SHA1(ac053cc4908b4075f918748b89570e07a0ba5116) ) ROM_LOAD( "a75-04.rom", 0x08000, 0x8000, CRC(71fae199) SHA1(5d253c46ccf4cd2976a5fb8b8713f0f345443d06) ) ROM_LOAD( "a75-05.rom", 0x10000, 0x8000, CRC(c76374e2) SHA1(7520dd48de20db60a2038f134dcaa454988e7874) ) ROM_REGION( 0x0600, "proms", 0 ) ROM_LOAD( "a75-07.bpr", 0x0000, 0x0200, CRC(0af8b289) SHA1(6bc589e8a609b4cf450aebedc8ce02d5d45c970f) ) /* red component */ ROM_LOAD( "a75-08.bpr", 0x0200, 0x0200, CRC(abb002fb) SHA1(c14f56b8ef103600862e7930709d293b0aa97a73) ) /* green component */ ROM_LOAD( "a75-09.bpr", 0x0400, 0x0200, CRC(a7c6c277) SHA1(adaa003dcd981576ea1cc5f697d709b2d6b2ea29) ) /* blue component */ /* Until we know what this MCU is supposed to do, we put it here */ ROM_REGION( 0x0800, "user1", 0 ) ROM_LOAD( "68705p3.6i", 0x0000, 0x0800, CRC(389a8cfb) SHA1(9530c051b61b5bdec7018c6fdc1ea91288a406bd) ) // this has the 1986 by Yasu copyright like some of the new decaps loaded in the parent set! ROM_END ROM_START( ark1ball ) ROM_REGION( 0x10000, "maincpu", 0 ) ROM_LOAD( "a-1.7d", 0x0000, 0x8000, CRC(dd4f2b72) SHA1(399a8636030a702dafc1da926f115df6f045bef1) ) ROM_LOAD( "2palline.7f", 0x8000, 0x8000, CRC(ed6b62ab) SHA1(4d4991b422756bd304fc5ef236aac1422fe1f999) ) /* MCU from the World early version ('arkanoid'), so the game is playable */ ROM_REGION( 0x0800, "mcu", 0 ) /* 2k for the microcontroller */ ROM_LOAD( "ark1ball.uc", 0x0000, 0x0800, BAD_DUMP CRC(515d77b6) SHA1(a302937683d11f663abd56a2fd7c174374e4d7fb) ) ROM_REGION( 0x18000, "gfx1", 0 ) ROM_LOAD( "a-3.3a", 0x00000, 0x8000, CRC(038b74ba) SHA1(ac053cc4908b4075f918748b89570e07a0ba5116) ) ROM_LOAD( "a-4.3d", 0x08000, 0x8000, CRC(71fae199) SHA1(5d253c46ccf4cd2976a5fb8b8713f0f345443d06) ) ROM_LOAD( "a-5.3f", 0x10000, 0x8000, CRC(c76374e2) SHA1(7520dd48de20db60a2038f134dcaa454988e7874) ) ROM_REGION( 0x0600, "proms", 0 ) ROM_LOAD( "a75-07.bpr", 0x0000, 0x0200, CRC(0af8b289) SHA1(6bc589e8a609b4cf450aebedc8ce02d5d45c970f) ) /* red component */ ROM_LOAD( "a75-08.bpr", 0x0200, 0x0200, CRC(abb002fb) SHA1(c14f56b8ef103600862e7930709d293b0aa97a73) ) /* green component */ ROM_LOAD( "a75-09.bpr", 0x0400, 0x0200, CRC(a7c6c277) SHA1(adaa003dcd981576ea1cc5f697d709b2d6b2ea29) ) /* blue component */ ROM_END ROM_START( arkangc ) ROM_REGION( 0x10000, "maincpu", 0 ) ROM_LOAD( "arkgc.1", 0x0000, 0x8000, CRC(c54232e6) SHA1(beb759cee68009a06824b755d2aa26d7d436b5b0) ) ROM_LOAD( "arkgc.2", 0x8000, 0x8000, CRC(9f0d4754) SHA1(731c9224616a338084edd6944c754d68eabba7f2) ) ROM_REGION( 0x18000, "gfx1", 0 ) ROM_LOAD( "a75-03.rom", 0x00000, 0x8000, CRC(038b74ba) SHA1(ac053cc4908b4075f918748b89570e07a0ba5116) ) ROM_LOAD( "a75-04.rom", 0x08000, 0x8000, CRC(71fae199) SHA1(5d253c46ccf4cd2976a5fb8b8713f0f345443d06) ) ROM_LOAD( "a75-05.rom", 0x10000, 0x8000, CRC(c76374e2) SHA1(7520dd48de20db60a2038f134dcaa454988e7874) ) ROM_REGION( 0x0600, "proms", 0 ) ROM_LOAD( "a75-07.bpr", 0x0000, 0x0200, CRC(0af8b289) SHA1(6bc589e8a609b4cf450aebedc8ce02d5d45c970f) ) /* red component */ ROM_LOAD( "a75-08.bpr", 0x0200, 0x0200, CRC(abb002fb) SHA1(c14f56b8ef103600862e7930709d293b0aa97a73) ) /* green component */ ROM_LOAD( "a75-09.bpr", 0x0400, 0x0200, CRC(a7c6c277) SHA1(adaa003dcd981576ea1cc5f697d709b2d6b2ea29) ) /* blue component */ ROM_END ROM_START( arkangc2 ) ROM_REGION( 0x10000, "maincpu", 0 ) ROM_LOAD( "1.81", 0x0000, 0x8000, CRC(bd6eb996) SHA1(a048ff01156166595dca0b6bee46344f7db548a8) ) ROM_LOAD( "2.82", 0x8000, 0x8000, CRC(29dbe452) SHA1(b99cb98549bddf1e673e2e715c80664001581f9f) ) ROM_REGION( 0x18000, "gfx1", 0 ) ROM_LOAD( "a75-03.rom", 0x00000, 0x8000, CRC(038b74ba) SHA1(ac053cc4908b4075f918748b89570e07a0ba5116) ) ROM_LOAD( "a75-04.rom", 0x08000, 0x8000, CRC(71fae199) SHA1(5d253c46ccf4cd2976a5fb8b8713f0f345443d06) ) ROM_LOAD( "a75-05.rom", 0x10000, 0x8000, CRC(c76374e2) SHA1(7520dd48de20db60a2038f134dcaa454988e7874) ) ROM_REGION( 0x0600, "proms", 0 ) ROM_LOAD( "a75-07.bpr", 0x0000, 0x0200, CRC(0af8b289) SHA1(6bc589e8a609b4cf450aebedc8ce02d5d45c970f) ) /* red component */ ROM_LOAD( "a75-08.bpr", 0x0200, 0x0200, CRC(abb002fb) SHA1(c14f56b8ef103600862e7930709d293b0aa97a73) ) /* green component */ ROM_LOAD( "a75-09.bpr", 0x0400, 0x0200, CRC(a7c6c277) SHA1(adaa003dcd981576ea1cc5f697d709b2d6b2ea29) ) /* blue component */ ROM_END ROM_START( block2 ) ROM_REGION( 0x18000, "maincpu", 0 ) ROM_LOAD( "1.bin", 0x00000, 0x8000, CRC(2b026cae) SHA1(73d1d5d3e6d65fbe378ce85ff501610573ae5e95) ) ROM_LOAD( "2.bin", 0x08000, 0x8000, CRC(e3843fea) SHA1(8c654dcf78d9e4f4c6a7a7d384fdf622536234c1) ) ROM_REGION( 0x8000, "unknown", 0 ) /* is it more data or something else like sound or palette ? not Z80 code nor levels anyway */ ROM_LOAD( "3.bin", 0x00000, 0x8000, CRC(e336c219) SHA1(e1dce37727e7084a83e73f15a138312ab6224061) ) ROM_REGION( 0x18000, "gfx1", 0 ) ROM_LOAD( "4.bin", 0x00000, 0x8000, CRC(6d2c6123) SHA1(26f32099d363ab2c8505722513638b827e49a8fc) ) ROM_LOAD( "5.bin", 0x08000, 0x8000, CRC(09a1f9d9) SHA1(c7e21aba6efb51c5501aa1428f6d9a817cb86555) ) ROM_LOAD( "6.bin", 0x10000, 0x8000, CRC(dfb9f7e2) SHA1(8d938ee6f8dcac0a564d5fa7cd5da34e0db07c71) ) // no proms were present in this set.. assumed to be the same ROM_REGION( 0x0600, "proms", 0 ) ROM_LOAD( "a75-07.bpr", 0x0000, 0x0200, CRC(0af8b289) SHA1(6bc589e8a609b4cf450aebedc8ce02d5d45c970f) ) /* red component */ ROM_LOAD( "a75-08.bpr", 0x0200, 0x0200, CRC(abb002fb) SHA1(c14f56b8ef103600862e7930709d293b0aa97a73) ) /* green component */ ROM_LOAD( "a75-09.bpr", 0x0400, 0x0200, CRC(a7c6c277) SHA1(adaa003dcd981576ea1cc5f697d709b2d6b2ea29) ) /* blue component */ ROM_END // this set has the same 'space invader' scrambled block gfx, and unknown (sound?) rom as the one above // sadly no mention of what chip it might be for in the readme. ROM_START( arkbloc3 ) ROM_REGION( 0x18000, "maincpu", 0 ) ROM_LOAD( "blockbl.001", 0x00000, 0x8000, CRC(bf7197a0) SHA1(4fbc0cbc09d292ab0f2e4a35b30505b2f7e4dc0d) ) ROM_LOAD( "blockbl.002", 0x08000, 0x8000, CRC(29dbe452) SHA1(b99cb98549bddf1e673e2e715c80664001581f9f) ) ROM_REGION( 0x8000, "unknown", 0 ) /* is it more data or something else like sound or palette ? not Z80 code nor levels anyway */ ROM_LOAD( "blockbl.006", 0x00000, 0x8000, CRC(e336c219) SHA1(e1dce37727e7084a83e73f15a138312ab6224061) ) ROM_REGION( 0x18000, "gfx1", 0 ) ROM_LOAD( "blockbl.003", 0x00000, 0x8000, CRC(6d2c6123) SHA1(26f32099d363ab2c8505722513638b827e49a8fc) ) ROM_LOAD( "blockbl.004", 0x08000, 0x8000, CRC(09a1f9d9) SHA1(c7e21aba6efb51c5501aa1428f6d9a817cb86555) ) ROM_LOAD( "blockbl.005", 0x10000, 0x8000, CRC(dfb9f7e2) SHA1(8d938ee6f8dcac0a564d5fa7cd5da34e0db07c71) ) // no proms were present in this set.. assumed to be the same ROM_REGION( 0x0600, "proms", 0 ) ROM_LOAD( "a75-07.bpr", 0x0000, 0x0200, CRC(0af8b289) SHA1(6bc589e8a609b4cf450aebedc8ce02d5d45c970f) ) /* red component */ ROM_LOAD( "a75-08.bpr", 0x0200, 0x0200, CRC(abb002fb) SHA1(c14f56b8ef103600862e7930709d293b0aa97a73) ) /* green component */ ROM_LOAD( "a75-09.bpr", 0x0400, 0x0200, CRC(a7c6c277) SHA1(adaa003dcd981576ea1cc5f697d709b2d6b2ea29) ) /* blue component */ ROM_END ROM_START( arkblock ) ROM_REGION( 0x10000, "maincpu", 0 ) ROM_LOAD( "ark-6.bin", 0x0000, 0x8000, CRC(0be015de) SHA1(f4209085b59d2c96a62ac9657c7bf097da55362b) ) ROM_LOAD( "arkgc.2", 0x8000, 0x8000, CRC(9f0d4754) SHA1(731c9224616a338084edd6944c754d68eabba7f2) ) ROM_REGION( 0x18000, "gfx1", 0 ) ROM_LOAD( "a75-03.rom", 0x00000, 0x8000, CRC(038b74ba) SHA1(ac053cc4908b4075f918748b89570e07a0ba5116) ) ROM_LOAD( "a75-04.rom", 0x08000, 0x8000, CRC(71fae199) SHA1(5d253c46ccf4cd2976a5fb8b8713f0f345443d06) ) ROM_LOAD( "a75-05.rom", 0x10000, 0x8000, CRC(c76374e2) SHA1(7520dd48de20db60a2038f134dcaa454988e7874) ) ROM_REGION( 0x0600, "proms", 0 ) ROM_LOAD( "a75-07.bpr", 0x0000, 0x0200, CRC(0af8b289) SHA1(6bc589e8a609b4cf450aebedc8ce02d5d45c970f) ) /* red component */ ROM_LOAD( "a75-08.bpr", 0x0200, 0x0200, CRC(abb002fb) SHA1(c14f56b8ef103600862e7930709d293b0aa97a73) ) /* green component */ ROM_LOAD( "a75-09.bpr", 0x0400, 0x0200, CRC(a7c6c277) SHA1(adaa003dcd981576ea1cc5f697d709b2d6b2ea29) ) /* blue component */ ROM_END ROM_START( arkbloc2 ) ROM_REGION( 0x10000, "maincpu", 0 ) ROM_LOAD( "block01.bin", 0x0000, 0x8000, CRC(5be667e1) SHA1(fbc5c97d836c404a2e6c007c3836e36b52ae75a1) ) ROM_LOAD( "block02.bin", 0x8000, 0x8000, CRC(4f883ef1) SHA1(cb090a57fc75f17a3e2ba637f0e3ec93c1d02cea) ) ROM_REGION( 0x18000, "gfx1", 0 ) ROM_LOAD( "a75-03.rom", 0x00000, 0x8000, CRC(038b74ba) SHA1(ac053cc4908b4075f918748b89570e07a0ba5116) ) ROM_LOAD( "a75-04.rom", 0x08000, 0x8000, CRC(71fae199) SHA1(5d253c46ccf4cd2976a5fb8b8713f0f345443d06) ) ROM_LOAD( "a75-05.rom", 0x10000, 0x8000, CRC(c76374e2) SHA1(7520dd48de20db60a2038f134dcaa454988e7874) ) ROM_REGION( 0x0600, "proms", 0 ) ROM_LOAD( "a75-07.bpr", 0x0000, 0x0200, CRC(0af8b289) SHA1(6bc589e8a609b4cf450aebedc8ce02d5d45c970f) ) /* red component */ ROM_LOAD( "a75-08.bpr", 0x0200, 0x0200, CRC(abb002fb) SHA1(c14f56b8ef103600862e7930709d293b0aa97a73) ) /* green component */ ROM_LOAD( "a75-09.bpr", 0x0400, 0x0200, CRC(a7c6c277) SHA1(adaa003dcd981576ea1cc5f697d709b2d6b2ea29) ) /* blue component */ ROM_END /* arkgcbl - dump from citylan: Anno 1986 N.revisione 06.09.86 CPU: 1x MK3880N-4-Z80CPU (main) 1x AY-3-8910A (sound) 1x oscillator 12.000MHz ROMs: 5x TNS27256JL 5x PROM N82S129N 1x PROM MMI63S141N Note: 1x 28x2 EDGE connector (not Jamma) 1x trimmer (volume) 1x 8 switches dip Dumped 19/03/2006 */ ROM_START( arkgcbl ) ROM_REGION( 0x10000, "maincpu", 0 ) ROM_LOAD( "16.6e", 0x0000, 0x8000, CRC(b0f73900) SHA1(2c9a36cc1d2a3f33ec81d63c1c325554b818d2d3) ) ROM_LOAD( "17.6f", 0x8000, 0x8000, CRC(9827f297) SHA1(697874e73e045eb5a7bf333d7310934b239c0adf) ) ROM_REGION( 0x18000, "gfx1", 0 ) ROM_LOAD( "a75-03.rom", 0x00000, 0x8000, CRC(038b74ba) SHA1(ac053cc4908b4075f918748b89570e07a0ba5116) ) ROM_LOAD( "a75-04.rom", 0x08000, 0x8000, CRC(71fae199) SHA1(5d253c46ccf4cd2976a5fb8b8713f0f345443d06) ) ROM_LOAD( "a75-05.rom", 0x10000, 0x8000, CRC(c76374e2) SHA1(7520dd48de20db60a2038f134dcaa454988e7874) ) ROM_REGION( 0x0600, "proms", 0 ) ROM_LOAD( "82s129.5k", 0x0000, 0x0100, CRC(fa70b64d) SHA1(273669d05f793cf1ee0741b175be281307fa9b5e) ) /* red component + */ ROM_LOAD( "82s129.5jk", 0x0100, 0x0100, CRC(cca69884) SHA1(fdcd66110c8eb901a401f8618821c7980946a511) ) /* red component = a75-07.bpr*/ ROM_LOAD( "82s129.5l", 0x0200, 0x0100, CRC(3e4d2bf5) SHA1(c475887302dd137d6965769070b7d55f488c1b25) ) /* green component + */ ROM_LOAD( "82s129.5kl", 0x0300, 0x0100, CRC(085d625a) SHA1(26c96a1c1b7562fed84c31dd92fdf7829e96a9c7) ) /* green component = a75-08.bpr*/ ROM_LOAD( "82s129.5mn", 0x0400, 0x0100, CRC(0fe0b108) SHA1(fcf27619208922345a1e42b3a219b4274f66968d) ) /* blue component + */ ROM_LOAD( "63s141.5m", 0x0500, 0x0100, CRC(5553f675) SHA1(c50255af8d99664b92e0bb34a527fd42ebf7e759) ) /* blue component = a75-09.bpr*/ ROM_REGION( 0x0200, "pal", 0 ) ROM_LOAD( "pal16r8.5f", 0x0000, 0x0104, CRC(36471917) SHA1(d0f295a94d480b44416e66be4b480b299aad5c3c) ) ROM_END /* this one still has the original copyright intact */ ROM_START( arkgcbla ) ROM_REGION( 0x10000, "maincpu", 0 ) ROM_LOAD( "k101.e7", 0x0000, 0x8000, CRC(892a556e) SHA1(10d1a92f8ab1b8184b05182a2de070b163a603e2) ) ROM_LOAD( "k102.f7", 0x8000, 0x8000, CRC(d208d05c) SHA1(0aa99a0cb8211e7b90d681c91cc77aa7078a0ccc) ) ROM_REGION( 0x18000, "gfx1", 0 ) ROM_LOAD( "a75-03.rom", 0x00000, 0x8000, CRC(038b74ba) SHA1(ac053cc4908b4075f918748b89570e07a0ba5116) ) ROM_LOAD( "a75-04.rom", 0x08000, 0x8000, CRC(71fae199) SHA1(5d253c46ccf4cd2976a5fb8b8713f0f345443d06) ) ROM_LOAD( "a75-05.rom", 0x10000, 0x8000, CRC(c76374e2) SHA1(7520dd48de20db60a2038f134dcaa454988e7874) ) ROM_REGION( 0x0600, "proms", 0 ) ROM_LOAD( "82s129.5k", 0x0000, 0x0100, CRC(fa70b64d) SHA1(273669d05f793cf1ee0741b175be281307fa9b5e) ) /* red component + */ ROM_LOAD( "82s129.5jk", 0x0100, 0x0100, CRC(cca69884) SHA1(fdcd66110c8eb901a401f8618821c7980946a511) ) /* red component = a75-07.bpr*/ ROM_LOAD( "82s129.5l", 0x0200, 0x0100, CRC(3e4d2bf5) SHA1(c475887302dd137d6965769070b7d55f488c1b25) ) /* green component + */ ROM_LOAD( "82s129.5kl", 0x0300, 0x0100, CRC(085d625a) SHA1(26c96a1c1b7562fed84c31dd92fdf7829e96a9c7) ) /* green component = a75-08.bpr*/ ROM_LOAD( "82s129.5mn", 0x0400, 0x0100, CRC(0fe0b108) SHA1(fcf27619208922345a1e42b3a219b4274f66968d) ) /* blue component + */ ROM_LOAD( "63s141.5m", 0x0500, 0x0100, CRC(5553f675) SHA1(c50255af8d99664b92e0bb34a527fd42ebf7e759) ) /* blue component = a75-09.bpr*/ ROM_REGION( 0x0200, "pal", 0 ) ROM_LOAD( "pal16r8.5f", 0x0000, 0x0104, CRC(36471917) SHA1(d0f295a94d480b44416e66be4b480b299aad5c3c) ) ROM_END ROM_START( paddle2 ) ROM_REGION( 0x10000, "maincpu", 0 ) ROM_LOAD( "paddle2.16", 0x0000, 0x8000, CRC(a286333c) SHA1(0b2c9cb0df236f327413d0c541453e1ba979ea38) ) ROM_LOAD( "paddle2.17", 0x8000, 0x8000, CRC(04c2acb5) SHA1(7ce8ba31224f705b2b6ed0200404ef5f8f688001) ) ROM_REGION( 0x18000, "gfx1", 0 ) ROM_LOAD( "a75-03.rom", 0x00000, 0x8000, CRC(038b74ba) SHA1(ac053cc4908b4075f918748b89570e07a0ba5116) ) ROM_LOAD( "a75-04.rom", 0x08000, 0x8000, CRC(71fae199) SHA1(5d253c46ccf4cd2976a5fb8b8713f0f345443d06) ) ROM_LOAD( "a75-05.rom", 0x10000, 0x8000, CRC(c76374e2) SHA1(7520dd48de20db60a2038f134dcaa454988e7874) ) ROM_REGION( 0x0600, "proms", 0 ) ROM_LOAD( "a75-07.bpr", 0x0000, 0x0200, CRC(0af8b289) SHA1(6bc589e8a609b4cf450aebedc8ce02d5d45c970f) ) /* red component */ ROM_LOAD( "a75-08.bpr", 0x0200, 0x0200, CRC(abb002fb) SHA1(c14f56b8ef103600862e7930709d293b0aa97a73) ) /* green component */ ROM_LOAD( "a75-09.bpr", 0x0400, 0x0200, CRC(a7c6c277) SHA1(adaa003dcd981576ea1cc5f697d709b2d6b2ea29) ) /* blue component */ ROM_END ROM_START( arkatayt ) ROM_REGION( 0x10000, "maincpu", 0 ) ROM_LOAD( "ic81-v.3f", 0x0000, 0x8000, CRC(154e2c6f) SHA1(dce3ae1ca83b5071ebec96f3ae18b96abe828ce5) ) ROM_LOAD( "ic82-w.5f", 0x8000, 0x8000, CRC(4fa8cefa) SHA1(fb825834da9c8638e6a328784922b5dc23f16564) ) ROM_REGION( 0x18000, "gfx1", 0 ) ROM_LOAD( "1-ic33.2c", 0x00000, 0x8000, CRC(038b74ba) SHA1(ac053cc4908b4075f918748b89570e07a0ba5116) ) ROM_LOAD( "2-ic34.3c", 0x08000, 0x8000, CRC(71fae199) SHA1(5d253c46ccf4cd2976a5fb8b8713f0f345443d06) ) ROM_LOAD( "3-ic35.5c", 0x10000, 0x8000, CRC(c76374e2) SHA1(7520dd48de20db60a2038f134dcaa454988e7874) ) ROM_REGION( 0x0600, "proms", 0 ) ROM_LOAD( "ic73.11e", 0x0000, 0x0200, CRC(0af8b289) SHA1(6bc589e8a609b4cf450aebedc8ce02d5d45c970f) ) /* red component */ ROM_LOAD( "ic74.12e", 0x0200, 0x0200, CRC(abb002fb) SHA1(c14f56b8ef103600862e7930709d293b0aa97a73) ) /* green component */ ROM_LOAD( "ic75.13e", 0x0400, 0x0200, CRC(a7c6c277) SHA1(adaa003dcd981576ea1cc5f697d709b2d6b2ea29) ) /* blue component */ ROM_END ROM_START( arktayt2 ) ROM_REGION( 0x10000, "maincpu", 0 ) ROM_LOAD( "ic81.3f", 0x0000, 0x8000, CRC(6e0a2b6f) SHA1(5227d7a944cb1e815f60ec87a67f7462870ff9fe) ) ROM_LOAD( "ic82.5f", 0x8000, 0x8000, CRC(5a97dd56) SHA1(b71c7b5ced2b0eebbcc5996dd21a1bb1c2da4819) ) ROM_REGION( 0x18000, "gfx1", 0 ) ROM_LOAD( "1-ic33.2c", 0x00000, 0x8000, CRC(038b74ba) SHA1(ac053cc4908b4075f918748b89570e07a0ba5116) ) ROM_LOAD( "2-ic34.3c", 0x08000, 0x8000, CRC(71fae199) SHA1(5d253c46ccf4cd2976a5fb8b8713f0f345443d06) ) ROM_LOAD( "3-ic35.5c", 0x10000, 0x8000, CRC(c76374e2) SHA1(7520dd48de20db60a2038f134dcaa454988e7874) ) ROM_REGION( 0x0600, "proms", 0 ) ROM_LOAD( "ic73.11e", 0x0000, 0x0200, CRC(0af8b289) SHA1(6bc589e8a609b4cf450aebedc8ce02d5d45c970f) ) /* red component */ ROM_LOAD( "ic74.12e", 0x0200, 0x0200, CRC(abb002fb) SHA1(c14f56b8ef103600862e7930709d293b0aa97a73) ) /* green component */ ROM_LOAD( "ic75.13e", 0x0400, 0x0200, CRC(a7c6c277) SHA1(adaa003dcd981576ea1cc5f697d709b2d6b2ea29) ) /* blue component */ ROM_END ROM_START( tetrsark ) ROM_REGION( 0x18000, "maincpu", 0 ) ROM_LOAD( "ic17.1", 0x00000, 0x8000, CRC(1a505eda) SHA1(92f171a12cf0c326d29c244514718df04b998426) ) ROM_LOAD( "ic16.2", 0x08000, 0x8000, CRC(157bc4df) SHA1(b2c704148e7e3ca61ab51308ee0d66ea1088bff3) ) ROM_REGION( 0x18000, "gfx1", 0 ) ROM_LOAD( "ic64.3", 0x00000, 0x8000, CRC(c3e9b290) SHA1(6e99520606c654e531dbeb9a598cfbb443c24dff) ) ROM_LOAD( "ic63.4", 0x08000, 0x8000, CRC(de9a368f) SHA1(ffbb2479200648da3f3e7ab7cebcdb604f6dfb3d) ) ROM_LOAD( "ic62.5", 0x10000, 0x8000, CRC(c8e80a00) SHA1(4bee4c36ee768ae68ebc64e639fdc43f61c74f92) ) ROM_REGION( 0x0600, "proms", 0 ) ROM_LOAD( "a75-07.bpr", 0x0000, 0x0200, CRC(0af8b289) SHA1(6bc589e8a609b4cf450aebedc8ce02d5d45c970f) ) /* red component */ ROM_LOAD( "a75-08.bpr", 0x0200, 0x0200, CRC(abb002fb) SHA1(c14f56b8ef103600862e7930709d293b0aa97a73) ) /* green component */ ROM_LOAD( "a75-09.bpr", 0x0400, 0x0200, CRC(a7c6c277) SHA1(adaa003dcd981576ea1cc5f697d709b2d6b2ea29) ) /* blue component */ ROM_END ROM_START( hexa ) ROM_REGION( 0x18000, "maincpu", 0 ) /* 64k for code + 32k for banked ROM */ ROM_LOAD( "hexa.20", 0x00000, 0x8000, CRC(98b00586) SHA1(3591a3b0486d720f0aaa9f0bf4be352cd0ffcbc7) ) ROM_LOAD( "hexa.21", 0x10000, 0x8000, CRC(3d5d006c) SHA1(ad4eadab82024b122182eacb5a322cfd6e476a70) ) ROM_REGION( 0x18000, "gfx1", 0 ) ROM_LOAD( "hexa.17", 0x00000, 0x8000, CRC(f6911dd6) SHA1(b12ea27ecddd60820a32d4346afab0cc9d06fa57) ) ROM_LOAD( "hexa.18", 0x08000, 0x8000, CRC(6e3d95d2) SHA1(6399b7b5d088ceda08fdea9cf650f6b405f038e7) ) ROM_LOAD( "hexa.19", 0x10000, 0x8000, CRC(ffe97a31) SHA1(f16b5d2b9ace09bcbbfe3dfb73db7fa377d1af7f) ) ROM_REGION( 0x0300, "proms", 0 ) ROM_LOAD( "hexa.001", 0x0000, 0x0100, CRC(88a055b4) SHA1(eee86a7930d0a251f3e5c2134532cd1dede2026c) ) ROM_LOAD( "hexa.003", 0x0100, 0x0100, CRC(3e9d4932) SHA1(9a336dba7134400312985b9902c77b4141105853) ) ROM_LOAD( "hexa.002", 0x0200, 0x0100, CRC(ff15366c) SHA1(7feaf1c768bfe76432fb80991585e13d95960b34) ) ROM_END ROM_START( brixian ) ROM_REGION( 0x18000, "maincpu", 0 ) ROM_LOAD( "b1.bin", 0x00000, 0x8000, CRC(3d167d09) SHA1(1d5bd098b655b8d2f956cfcb718213915bee3e41) ) ROM_LOAD( "e7.bin", 0x08000, 0x2000, CRC(9e3707ab) SHA1(a04fb4824239f8ed1ef1de2f3c0f9d749320b2ba) ) // this is near a 6116 RAM bank, unknown purpose ROM_REGION( 0x18000, "gfx1", 0 ) ROM_LOAD( "b4.bin", 0x00000, 0x8000, CRC(34a7a693) SHA1(793fa6dd065a158bedcd0fdc494cc8fc793ae8be) ) ROM_LOAD( "c4.bin", 0x08000, 0x8000, CRC(d422eda5) SHA1(4874b57ec8a8aa29937f5ccc2a734ffeb7834d8a) ) ROM_LOAD( "e4.bin", 0x10000, 0x8000, CRC(9b2e79d6) SHA1(8a40e0ef2a792efc37ea50eec01cf3fb5a3e3215) ) ROM_REGION( 0x0600, "proms", 0 ) ROM_LOAD( "n82s131n.6l", 0x0000, 0x0200, CRC(0fa51a5b) SHA1(8c5cb69fbff8a3ba90f945c35f72754f9cc8f18c) ) ROM_LOAD( "n82s131n.6p", 0x0200, 0x0200, CRC(d833ad33) SHA1(a7c17c96a670916e7102afc94dc2f0cb0455f0ce) ) ROM_LOAD( "n82s131n.6m", 0x0400, 0x0200, CRC(05297649) SHA1(35f99cf8dddd66e26e2110619eb46bd6ccff41df) ) ROM_REGION( 0x0800, "mcu", 0 ) ROM_LOAD( "68705p5", 0x0000, 0x0800, NO_DUMP ) // this appears to be providing ~0x200 bytes of code at c600, like most semicom games. ROM_END /* Driver Initialization */ static void arkanoid_bootleg_init( running_machine &machine ) { machine.device("maincpu")->memory().space(AS_PROGRAM)->install_legacy_read_handler(0xf000, 0xf000, FUNC(arkanoid_bootleg_f000_r) ); machine.device("maincpu")->memory().space(AS_PROGRAM)->install_legacy_read_handler(0xf002, 0xf002, FUNC(arkanoid_bootleg_f002_r) ); machine.device("maincpu")->memory().space(AS_PROGRAM)->install_legacy_write_handler(0xd018, 0xd018, FUNC(arkanoid_bootleg_d018_w) ); machine.device("maincpu")->memory().space(AS_PROGRAM)->install_legacy_read_handler(0xd008, 0xd008, FUNC(arkanoid_bootleg_d008_r) ); } static DRIVER_INIT( arkangc ) { arkanoid_state *state = machine.driver_data(); state->m_bootleg_id = ARKANGC; arkanoid_bootleg_init(machine); } static DRIVER_INIT( arkangc2 ) { arkanoid_state *state = machine.driver_data(); state->m_bootleg_id = ARKANGC2; arkanoid_bootleg_init(machine); } static DRIVER_INIT( block2 ) { arkanoid_state *state = machine.driver_data(); // the graphics on this bootleg have the data scrambled int tile; UINT8* srcgfx = machine.region("gfx1")->base(); UINT8* buffer = auto_alloc_array(machine, UINT8, 0x18000); for (tile = 0; tile < 0x3000; tile++) { int srctile; // combine these into a single swap.. srctile = BITSWAP16(tile,15,14,13,12, 11,10,9,8, 7,5,6,3, 1,2,4,0); srctile = BITSWAP16(srctile,15,14,13,12, 11,9,10,5, 7,6,8,4, 3,2,1,0); srctile = srctile ^ 0xd4; memcpy(&buffer[tile * 8], &srcgfx[srctile * 8], 8); } memcpy(srcgfx, buffer, 0x18000); auto_free(machine, buffer); state->m_bootleg_id = BLOCK2; arkanoid_bootleg_init(machine); } static DRIVER_INIT( arkblock ) { arkanoid_state *state = machine.driver_data(); state->m_bootleg_id = ARKBLOCK; arkanoid_bootleg_init(machine); } static DRIVER_INIT( arkbloc2 ) { arkanoid_state *state = machine.driver_data(); state->m_bootleg_id = ARKBLOC2; arkanoid_bootleg_init(machine); } static DRIVER_INIT( arkgcbl ) { arkanoid_state *state = machine.driver_data(); state->m_bootleg_id = ARKGCBL; arkanoid_bootleg_init(machine); } static DRIVER_INIT( paddle2 ) { arkanoid_state *state = machine.driver_data(); state->m_bootleg_id = PADDLE2; arkanoid_bootleg_init(machine); } static DRIVER_INIT( tetrsark ) { UINT8 *ROM = machine.region("maincpu")->base(); int x; for (x = 0; x < 0x8000; x++) { ROM[x] = ROM[x] ^ 0x94; } machine.device("maincpu")->memory().space(AS_PROGRAM)->install_legacy_write_handler(0xd008, 0xd008, FUNC(tetrsark_d008_w) ); } static DRIVER_INIT( hexa ) { UINT8 *RAM = machine.region("maincpu")->base(); #if 0 /* Hexa is not protected or anything, but it keeps writing 0x3f to register */ /* 0x07 of the AY8910, to read the input ports. This causes clicks in the */ /* music since the output channels are continuously disabled and reenabled. */ /* To avoid that, we just NOP out the 0x3f write. */ RAM[0x0124] = 0x00; RAM[0x0125] = 0x00; RAM[0x0126] = 0x00; #endif memory_configure_bank(machine, "bank1", 0, 2, &RAM[0x10000], 0x4000); } /* Game Drivers */ GAME( 1986, arkanoid, 0, arkanoid, arkanoid, 0, ROT90, "Taito Corporation Japan", "Arkanoid (World)", GAME_SUPPORTS_SAVE ) GAME( 1986, arkanoidu, arkanoid, arkanoid, arkanoid, 0, ROT90, "Taito America Corporation (Romstar license)", "Arkanoid (US)", GAME_SUPPORTS_SAVE ) GAME( 1986, arkanoiduo, arkanoid, arkanoid, arkanoid, 0, ROT90, "Taito America Corporation (Romstar license)", "Arkanoid (US, older)", GAME_SUPPORTS_SAVE ) GAME( 1986, arkanoidj, arkanoid, arkanoid, arkanoidj,0, ROT90, "Taito Corporation", "Arkanoid (Japan)", GAME_SUPPORTS_SAVE ) GAME( 1986, arkmcubl, arkanoid, arkanoid, arkanoidj,0, ROT90, "bootleg", "Arkanoid (bootleg with MCU)", GAME_SUPPORTS_SAVE ) GAME( 1986, ark1ball, arkanoid, arkanoid, ark1ball, 0, ROT90, "bootleg", "Arkanoid (bootleg with MCU, harder)", GAME_SUPPORTS_SAVE ) GAME( 1986, arkangc, arkanoid, bootleg, arkangc, arkangc, ROT90, "bootleg (Game Corporation)", "Arkanoid (Game Corporation bootleg, set 1)", GAME_SUPPORTS_SAVE ) GAME( 1986, arkangc2, arkanoid, bootleg, arkangc2, arkangc2, ROT90, "bootleg (Game Corporation)", "Arkanoid (Game Corporation bootleg, set 2)", GAME_SUPPORTS_SAVE ) GAME( 1986, arkblock, arkanoid, bootleg, arkangc, arkblock, ROT90, "bootleg (Game Corporation)", "Block (Game Corporation bootleg, set 1)", GAME_SUPPORTS_SAVE ) GAME( 1986, arkbloc2, arkanoid, bootleg, arkangc, arkbloc2, ROT90, "bootleg (Game Corporation)", "Block (Game Corporation bootleg, set 2)", GAME_SUPPORTS_SAVE ) GAME( 1986, arkbloc3, arkanoid, bootleg, block2, block2, ROT90, "bootleg (Game Corporation)", "Block (Game Corporation bootleg, set 3)", GAME_SUPPORTS_SAVE ) // Both these sets have an extra unknown rom GAME( 1986, block2, arkanoid, bootleg, block2, block2, ROT90, "bootleg (S.P.A. Co.)", "Block 2 (S.P.A. Co. bootleg)", GAME_SUPPORTS_SAVE ) // and scrambled gfx roms with 'space invader' themed gfx GAME( 1986, arkgcbl, arkanoid, bootleg, arkgcbl, arkgcbl, ROT90, "bootleg", "Arkanoid (bootleg on Block hardware, set 1)", GAME_SUPPORTS_SAVE ) GAME( 1986, arkgcbla, arkanoid, bootleg, arkgcbl, arkgcbl, ROT90, "bootleg", "Arkanoid (bootleg on Block hardware, set 2)", GAME_SUPPORTS_SAVE ) GAME( 1988, paddle2, arkanoid, bootleg, paddle2, paddle2, ROT90, "bootleg", "Paddle 2 (bootleg on Block hardware)", GAME_SUPPORTS_SAVE ) GAME( 1986, arkatayt, arkanoid, bootleg, arkatayt, 0, ROT90, "bootleg (Tayto)", "Arkanoid (Tayto bootleg)", GAME_SUPPORTS_SAVE ) GAME( 1986, arktayt2, arkanoid, bootleg, arktayt2, 0, ROT90, "bootleg (Tayto)", "Arkanoid (Tayto bootleg, harder)", GAME_SUPPORTS_SAVE ) GAME( 1987, arkatour, arkanoid, arkanoid, arkanoid, 0, ROT90, "Taito America Corporation (Romstar license)", "Tournament Arkanoid (US)", GAME_SUPPORTS_SAVE ) GAME( 19??, tetrsark, 0, bootleg, tetrsark, tetrsark, ROT0, "D.R. Korea", "Tetris (D.R. Korea)", GAME_SUPPORTS_SAVE ) GAME( 199?, hexa, 0, hexa, hexa, hexa, ROT0, "D.R. Korea", "Hexa", GAME_IMPERFECT_SOUND | GAME_SUPPORTS_SAVE ) GAME( 1993, brixian, 0, brixian, brixian, 0, ROT0, "Cheil Computer System", "Brixian", GAME_SUPPORTS_SAVE|GAME_NOT_WORKING )