// license:BSD-3-Clause // copyright-holders:Bryan McPhail, Aaron Giles, R. Belmont, hap, Philip Bennett /*************************************************************************** Taito Ensoniq ES5505-based sound hardware TODO: * ES5510 ESP emulation is not perfect * ES5510 Input Clock and ES5505 Output channels are same in other PCBs? (Currently these are verified from Gun Buster schematics) * Where does the MB8421 go? Taito F3 (and Super Chase) have 2 of them on the sound area, Taito JC has one. ****************************************************************************/ #include "emu.h" #include "taito_en.h" #include "speaker.h" #include DEFINE_DEVICE_TYPE(TAITO_EN, taito_en_device, "taito_en", "Taito Ensoniq Sound System") taito_en_device::taito_en_device(const machine_config &mconfig, const char *tag, device_t *owner, uint32_t clock) : device_t(mconfig, TAITO_EN, tag, owner, clock) , m_audiocpu(*this, "audiocpu") , m_ensoniq(*this, "ensoniq") , m_esp(*this, "esp") , m_pump(*this, "pump") , m_duart68681(*this, "duart68681") , m_mb87078(*this, "mb87078") , m_osram(*this, "osram") , m_osrom(*this, "audiocpu") , m_cpubank(*this, "cpubank%u", 1) { } //------------------------------------------------- // device_start - device-specific startup //------------------------------------------------- void taito_en_device::device_start() { // tell the pump about the ESP chips m_pump->set_esp(m_esp); uint8_t *ROM = m_osrom->base(); uint32_t max = (m_osrom->bytes() - 0x100000) / 0x20000; for (int i = 0; i < 3; i++) m_cpubank[i]->configure_entries(0, max, &ROM[0x100000], 0x20000); m_bankmask = (memregion(":ensoniq.0")->bytes()/0x200000)-1; } //------------------------------------------------- // device_reset - device-specific reset //------------------------------------------------- void taito_en_device::device_reset() { /* Sound cpu program loads to 0xc00000 so we use a bank */ uint32_t max = (m_osrom->bytes() - 0x100000) / 0x20000; for (int i = 0; i < 3; i++) m_cpubank[i]->set_entry(i % max); uint16_t *ROM = (uint16_t *)m_osrom->base(); std::copy(&ROM[0x80000], &ROM[0x80004], &m_osram[0]); /* Stack and Reset vectors */ /* reset CPU to catch any banking of startup vectors */ m_audiocpu->reset(); m_audiocpu->set_input_line(INPUT_LINE_RESET, ASSERT_LINE); } /************************************* * * Handlers * *************************************/ WRITE16_MEMBER( taito_en_device::en_es5505_bank_w ) { /* mask out unused bits */ data &= m_bankmask; m_ensoniq->voice_bank_w(offset,data<<20); } WRITE8_MEMBER( taito_en_device::en_volume_w ) { m_mb87078->data_w(data, offset ^ 1); } /************************************* * * 68000 memory map * *************************************/ void taito_en_device::en_sound_map(address_map &map) { map(0x000000, 0x00ffff).ram().mirror(0x30000).share("osram"); map(0x140000, 0x140fff).rw("dpram", FUNC(mb8421_device::right_r), FUNC(mb8421_device::right_w)).umask16(0xff00); map(0x200000, 0x20001f).rw("ensoniq", FUNC(es5505_device::read), FUNC(es5505_device::write)); map(0x260000, 0x2601ff).rw("esp", FUNC(es5510_device::host_r), FUNC(es5510_device::host_w)).umask16(0x00ff); map(0x280000, 0x28001f).rw("duart68681", FUNC(mc68681_device::read), FUNC(mc68681_device::write)).umask16(0x00ff); map(0x300000, 0x30003f).w(this, FUNC(taito_en_device::en_es5505_bank_w)); map(0x340000, 0x340003).w(this, FUNC(taito_en_device::en_volume_w)).umask16(0xff00); map(0xc00000, 0xc1ffff).bankr("cpubank1"); map(0xc20000, 0xc3ffff).bankr("cpubank2"); map(0xc40000, 0xc7ffff).bankr("cpubank3"); map(0xff0000, 0xffffff).ram().share("osram"); // mirror } /************************************* * * MB87078 callback * *************************************/ WRITE8_MEMBER(taito_en_device::mb87078_gain_changed) { if (offset > 1) { // TODO : ES5505 Volume control is correct? m_ensoniq->set_output_gain(offset & 1, data / 100.0); m_ensoniq->set_output_gain(2|(offset & 1), data / 100.0); m_ensoniq->set_output_gain(4|(offset & 1), data / 100.0); m_ensoniq->set_output_gain(6|(offset & 1), data / 100.0); m_pump->set_output_gain(offset & 1, data / 100.0); } } /************************************* * * M68681 callback * *************************************/ WRITE_LINE_MEMBER(taito_en_device::duart_irq_handler) { if (state == ASSERT_LINE) { m_audiocpu->set_input_line_vector(M68K_IRQ_6, m_duart68681->get_irq_vector()); m_audiocpu->set_input_line(M68K_IRQ_6, ASSERT_LINE); } else { m_audiocpu->set_input_line(M68K_IRQ_6, CLEAR_LINE); } } /************************************* * * Device interfaces * *************************************/ /* 68681 I/O pin assignments (according to Gun Buster schematics): IP0: 5V OP0-OP5: N/C IP1: 5V OP6: ESPHALT IP2: 1MHz OP7: N/C IP3: 0.5MHz IP4: 0.5MHz IP5: 1MHz */ WRITE8_MEMBER(taito_en_device::duart_output) { if (data & 0x40) { if (!m_pump->get_esp_halted()) { logerror("Asserting ESPHALT\n"); m_pump->set_esp_halted(true); } } else { if (m_pump->get_esp_halted()) { logerror("Clearing ESPHALT\n"); m_pump->set_esp_halted(false); } } } //------------------------------------------------- // device_add_mconfig - add device configuration //------------------------------------------------- MACHINE_CONFIG_START(taito_en_device::device_add_mconfig) /* basic machine hardware */ MCFG_DEVICE_ADD("audiocpu", M68000, XTAL(30'476'100) / 2) MCFG_DEVICE_PROGRAM_MAP(en_sound_map) MCFG_DEVICE_ADD("esp", ES5510, XTAL(10'000'000)) // from Gun Buster schematics MCFG_DEVICE_DISABLE() MCFG_DEVICE_ADD("duart68681", MC68681, XTAL(16'000'000) / 4) MCFG_MC68681_SET_EXTERNAL_CLOCKS(XTAL(16'000'000)/2/8, XTAL(16'000'000)/2/16, XTAL(16'000'000)/2/16, XTAL(16'000'000)/2/8) MCFG_MC68681_IRQ_CALLBACK(WRITELINE(*this, taito_en_device, duart_irq_handler)) MCFG_MC68681_OUTPORT_CALLBACK(WRITE8(*this, taito_en_device, duart_output)) MCFG_DEVICE_ADD("mb87078", MB87078, 0) MCFG_MB87078_GAIN_CHANGED_CB(WRITE8(*this, taito_en_device, mb87078_gain_changed)) MCFG_DEVICE_ADD("dpram", MB8421, 0) // host accesses this from the other side /* sound hardware */ SPEAKER(config, "lspeaker").front_left(); SPEAKER(config, "rspeaker").front_right(); MCFG_DEVICE_ADD("pump", ESQ_5505_5510_PUMP, XTAL(30'476'100) / (2 * 16 * 32)) MCFG_SOUND_ROUTE(0, "lspeaker", 1.0) MCFG_SOUND_ROUTE(1, "rspeaker", 1.0) MCFG_DEVICE_ADD("ensoniq", ES5505, XTAL(30'476'100) / 2) MCFG_ES5505_REGION0("ensoniq.0") MCFG_ES5505_REGION1("ensoniq.0") MCFG_ES5505_CHANNELS(4) MCFG_SOUND_ROUTE(0, "pump", 1.0, 0) MCFG_SOUND_ROUTE(1, "pump", 1.0, 1) MCFG_SOUND_ROUTE(2, "pump", 1.0, 2) MCFG_SOUND_ROUTE(3, "pump", 1.0, 3) MCFG_SOUND_ROUTE(4, "pump", 1.0, 4) MCFG_SOUND_ROUTE(5, "pump", 1.0, 5) MCFG_SOUND_ROUTE(6, "pump", 1.0, 6) MCFG_SOUND_ROUTE(7, "pump", 1.0, 7) MACHINE_CONFIG_END