/*************************************************************************** didisasm.h Device disassembly interfaces. **************************************************************************** Copyright Aaron Giles All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * Neither the name 'MAME' nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY AARON GILES ''AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL AARON GILES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ***************************************************************************/ #pragma once #ifndef __EMU_H__ #error Dont include this file directly; include emu.h instead. #endif #ifndef __DIDISASM_H__ #define __DIDISASM_H__ //************************************************************************** // CONSTANTS //************************************************************************** // Disassembler constants const UINT32 DASMFLAG_SUPPORTED = 0x80000000; // are disassembly flags supported? const UINT32 DASMFLAG_STEP_OUT = 0x40000000; // this instruction should be the end of a step out sequence const UINT32 DASMFLAG_STEP_OVER = 0x20000000; // this instruction should be stepped over by setting a breakpoint afterwards const UINT32 DASMFLAG_OVERINSTMASK = 0x18000000; // number of extra instructions to skip when stepping over const UINT32 DASMFLAG_OVERINSTSHIFT = 27; // bits to shift after masking to get the value const UINT32 DASMFLAG_LENGTHMASK = 0x0000ffff; // the low 16-bits contain the actual length //************************************************************************** // MACROS //************************************************************************** #define DASMFLAG_STEP_OVER_EXTRA(x) ((x) << DASMFLAG_OVERINSTSHIFT) //************************************************************************** // TYPE DEFINITIONS //************************************************************************** // ======================> device_config_disasm_interface // class representing interface-specific configuration disasm class device_config_disasm_interface : public device_config_interface { public: // construction/destruction device_config_disasm_interface(const machine_config &mconfig, device_config &device); virtual ~device_config_disasm_interface(); // required configuration overrides UINT32 min_opcode_bytes() const { return disasm_min_opcode_bytes(); } UINT32 max_opcode_bytes() const { return disasm_max_opcode_bytes(); } protected: // required configuration overrides virtual UINT32 disasm_min_opcode_bytes() const = 0; virtual UINT32 disasm_max_opcode_bytes() const = 0; }; // ======================> device_disasm_interface // class representing interface-specific live disasm class device_disasm_interface : public device_interface { public: // construction/destruction device_disasm_interface(running_machine &machine, const device_config &config, device_t &device); virtual ~device_disasm_interface(); // configuration access const device_config_disasm_interface &disasm_config() const { return m_disasm_config; } UINT32 min_opcode_bytes() const { return m_disasm_config.min_opcode_bytes(); } UINT32 max_opcode_bytes() const { return m_disasm_config.max_opcode_bytes(); } // interface for disassembly offs_t disassemble(char *buffer, offs_t pc, const UINT8 *oprom, const UINT8 *opram, UINT32 options = 0) { return disasm_disassemble(buffer, pc, oprom, opram, options); } protected: // required operation overrides virtual offs_t disasm_disassemble(char *buffer, offs_t pc, const UINT8 *oprom, const UINT8 *opram, UINT32 options) = 0; const device_config_disasm_interface & m_disasm_config; // reference to configuration data }; #endif /* __DIDISASM_H__ */