// license:BSD-3-Clause // copyright-holders:Aaron Giles /*************************************************************************** eeprompar.c Parallel EEPROM devices. **************************************************************************** Parallel EEPROMs are generally simpler than serial EEPROMs, though they require more pins to provide the full set of address and data lines necessary. They also require more pins the larger the EEPROM is, whereas serial EEPROMs all share the same pinout regardless of size. At a basic level, there are 5 sets of signals involved: * /CE = chip enable * /OE = output enable * /WE = write enable * D0-Dn = data lines * A0-An = address lines To access the chip, the various enable states must be asserted or cleared. Note that these are generally active-low, so asserted means pulled to GND, and cleared means pulled to Vcc: /CE /OE /WE Action ASSERT ASSERT CLEAR Read (D0-Dn contain output data) ASSERT CLEAR ASSERT Write/Erase (D0-Dn are input data) Erase is performed by doing a write with D0-Dn all set to 1. In general, it is slow to write or erase (9ms is quoted in the 2816A datasheet, for example), and the /WE must be held low for the entire write/erase duration in order to guarantee the data is written. ***************************************************************************/ #include "emu.h" #include "machine/eeprompar.h" //************************************************************************** // BASE DEVICE IMPLEMENTATION //************************************************************************** //------------------------------------------------- // eeprom_parallel_base_device - constructor //------------------------------------------------- eeprom_parallel_base_device::eeprom_parallel_base_device(const machine_config &mconfig, device_type devtype, const char *name, const char *tag, device_t *owner, const char *shortname, const char *file) : eeprom_base_device(mconfig, devtype, name, tag, owner, shortname, file) { } //------------------------------------------------- // device_start - device-specific startup //------------------------------------------------- void eeprom_parallel_base_device::device_start() { // start the base class eeprom_base_device::device_start(); } //------------------------------------------------- // device_reset - device-specific reset //------------------------------------------------- void eeprom_parallel_base_device::device_reset() { // reset the base class eeprom_base_device::device_reset(); } //************************************************************************** // 28XX INTERFACE IMPLEMENTATION //************************************************************************** //------------------------------------------------- // eeprom_parallel_28xx_device - constructor //------------------------------------------------- eeprom_parallel_28xx_device::eeprom_parallel_28xx_device(const machine_config &mconfig, device_type devtype, const char *name, const char *tag, device_t *owner, const char *shortname, const char *file) : eeprom_parallel_base_device(mconfig, devtype, name, tag, owner, shortname, file) { } //------------------------------------------------- // read/write - read/write handlers //------------------------------------------------- WRITE8_MEMBER(eeprom_parallel_28xx_device::write) { eeprom_base_device::write(offset, data); } READ8_MEMBER(eeprom_parallel_28xx_device::read) { return eeprom_base_device::read(offset); } //************************************************************************** // DERIVED TYPES //************************************************************************** // macro for defining a new device class #define DEFINE_PARALLEL_EEPROM_DEVICE(_baseclass, _lowercase, _uppercase, _bits, _cells) \ eeprom_parallel_##_lowercase##_device::eeprom_parallel_##_lowercase##_device(const machine_config &mconfig, const char *tag, device_t *owner, uint32_t clock) \ : eeprom_parallel_##_baseclass##_device(mconfig, EEPROM_PARALLEL_##_uppercase, "Parallel EEPROM " #_uppercase " (" #_cells "x" #_bits ")", tag, owner, #_lowercase, __FILE__) \ { \ static_set_size(*this, _cells, _bits); \ } \ const device_type EEPROM_PARALLEL_##_uppercase = device_creator; // standard 28XX class of 8-bit EEPROMs DEFINE_PARALLEL_EEPROM_DEVICE(28xx, 2804, 2804, 8, 512) DEFINE_PARALLEL_EEPROM_DEVICE(28xx, 2816, 2816, 8, 2048) DEFINE_PARALLEL_EEPROM_DEVICE(28xx, 2864, 2864, 8, 8192) DEFINE_PARALLEL_EEPROM_DEVICE(28xx, 28256, 28256, 8, 32768) DEFINE_PARALLEL_EEPROM_DEVICE(28xx, 28512, 28512, 8, 65536) DEFINE_PARALLEL_EEPROM_DEVICE(28xx, 28010, 28010, 8, 131072) DEFINE_PARALLEL_EEPROM_DEVICE(28xx, 28020, 28020, 8, 262144) DEFINE_PARALLEL_EEPROM_DEVICE(28xx, 28040, 28040, 8, 524288)