// license:BSD-3-Clause // copyright-holders:hap /* TMS1000 family - TMS0950, TMS0970, TMS1990 */ #include "emu.h" #include "tms0970.h" #include "debugger.h" // TMS0950 is a TMS1000 with a TMS0980 style opla, it was quickly succeeded by the TMS0970 // - RAM, ROM, microinstructions is the same as TMS1000 // - 10-term inverted output PLA and segment PLA on the top-left DEFINE_DEVICE_TYPE(TMS0950, tms0950_cpu_device, "tms0950", "TMS0950") // 28-pin DIP, 8 O pins, 11? R pins // TMS0970 is a stripped-down version of the TMS0980, itself acting more like a TMS1000 // - RAM and ROM is the same as TMS1000 // - main instructions PLAs at the top half, to the right of the midline // * see TMS0980 notes, except that the fixed instruction list differs: // RETN, SETR, RBIT, SBIT, LDX, COMX, TDO, ..., redir(----0-00), LDP // - 32-term microinstructions PLA between the RAM and ROM, supporting 15 microinstructions // - 16-term inverted output PLA and segment PLA above the RAM (rotate opla 90 degrees) DEFINE_DEVICE_TYPE(TMS0970, tms0970_cpu_device, "tms0970", "TMS0970") // 28-pin DIP, 11 R pins (note: pinout may slightly differ from chip to chip) DEFINE_DEVICE_TYPE(TMS1990, tms1990_cpu_device, "tms1990", "TMS1990") // 28-pin DIP, ? R pins.. // internal memory maps static ADDRESS_MAP_START(program_10bit_8, AS_PROGRAM, 8, tms1k_base_device) AM_RANGE(0x000, 0x3ff) AM_ROM ADDRESS_MAP_END static ADDRESS_MAP_START(data_64x4, AS_DATA, 8, tms1k_base_device) AM_RANGE(0x00, 0x3f) AM_RAM ADDRESS_MAP_END // device definitions tms0970_cpu_device::tms0970_cpu_device(const machine_config &mconfig, const char *tag, device_t *owner, u32 clock) : tms0970_cpu_device(mconfig, TMS0970, tag, owner, clock, 8 /* o pins */, 11 /* r pins */, 6 /* pc bits */, 8 /* byte width */, 2 /* x width */, 10 /* prg width */, ADDRESS_MAP_NAME(program_10bit_8), 6 /* data width */, ADDRESS_MAP_NAME(data_64x4)) { } tms0970_cpu_device::tms0970_cpu_device(const machine_config &mconfig, device_type type, const char *tag, device_t *owner, u32 clock, u8 o_pins, u8 r_pins, u8 pc_bits, u8 byte_bits, u8 x_bits, int prgwidth, address_map_constructor program, int datawidth, address_map_constructor data) : tms1000_cpu_device(mconfig, type, tag, owner, clock, o_pins, r_pins, pc_bits, byte_bits, x_bits, prgwidth, program, datawidth, data) { } tms0950_cpu_device::tms0950_cpu_device(const machine_config &mconfig, const char *tag, device_t *owner, u32 clock) : tms0970_cpu_device(mconfig, TMS0950, tag, owner, clock, 8, 11, 6, 8, 2, 10, ADDRESS_MAP_NAME(program_10bit_8), 6, ADDRESS_MAP_NAME(data_64x4)) { } tms1990_cpu_device::tms1990_cpu_device(const machine_config &mconfig, const char *tag, device_t *owner, u32 clock) : tms0970_cpu_device(mconfig, TMS1990, tag, owner, clock, 8, 11, 6, 8, 2, 10, ADDRESS_MAP_NAME(program_10bit_8), 6, ADDRESS_MAP_NAME(data_64x4)) { } // machine configs MACHINE_CONFIG_MEMBER(tms0950_cpu_device::device_add_mconfig) // microinstructions PLA, output PLA, segment PLA MCFG_PLA_ADD("mpla", 8, 16, 30) MCFG_PLA_FILEFORMAT(BERKELEY) MCFG_PLA_ADD("opla", 4, 8, 10) MCFG_PLA_FILEFORMAT(BERKELEY) MCFG_PLA_ADD("spla", 3, 8, 8) MCFG_PLA_FILEFORMAT(BERKELEY) MACHINE_CONFIG_END MACHINE_CONFIG_MEMBER(tms0970_cpu_device::device_add_mconfig) // main opcodes PLA, microinstructions PLA, output PLA, segment PLA MCFG_PLA_ADD("ipla", 8, 15, 18) MCFG_PLA_FILEFORMAT(BERKELEY) MCFG_PLA_ADD("mpla", 5, 15, 32) MCFG_PLA_FILEFORMAT(BERKELEY) MCFG_PLA_ADD("opla", 4, 8, 16) MCFG_PLA_FILEFORMAT(BERKELEY) MCFG_PLA_ADD("spla", 3, 8, 8) MCFG_PLA_FILEFORMAT(BERKELEY) MACHINE_CONFIG_END // device_reset void tms0970_cpu_device::device_reset() { // common reset tms1k_base_device::device_reset(); // pre-decode instructionset m_fixed_decode.resize(0x100); memset(&m_fixed_decode[0], 0, 0x100*sizeof(u32)); m_micro_decode.resize(0x100); memset(&m_micro_decode[0], 0, 0x100*sizeof(u32)); for (int op = 0; op < 0x100; op++) { // upper half of the opcodes is always branch/call if (op & 0x80) m_fixed_decode[op] = (op & 0x40) ? F_CALL: F_BR; // 5 output bits select a microinstruction index u32 imask = m_ipla->read(op); u8 msel = imask & 0x1f; // but if (from bottom to top) term 1 is active and output bit 5 is 0, R2,R4-R7 directly select a microinstruction index if (imask & 0x40 && (imask & 0x20) == 0) msel = (op & 0xf) | (op >> 1 & 0x10); msel = BITSWAP8(msel,7,6,5,0,1,2,3,4); // lines are reversed u32 mmask = m_mpla->read(msel); mmask ^= 0x09fe; // invert active-negative // _____ _____ _____ _____ ______ _____ ______ _____ _____ const u32 md[15] = { M_CKM, M_CKP, M_YTP, M_MTP, M_ATN, M_NATN, M_MTN, M_15TN, M_CKN, M_NE, M_C8, M_CIN, M_AUTA, M_AUTY, M_STO }; for (int bit = 0; bit < 15; bit++) if (mmask & (1 << bit)) m_micro_decode[op] |= md[bit]; // the other ipla terms each select a fixed instruction const u32 id[8] = { F_LDP, F_TDO, F_COMX, F_LDX, F_SBIT, F_RBIT, F_SETR, F_RETN }; for (int bit = 0; bit < 8; bit++) if (imask & (0x80 << bit)) m_fixed_decode[op] |= id[bit]; } } // i/o handling void tms0970_cpu_device::write_o_output(u8 index) { m_o_index = index; m_o = m_spla->read(index); m_write_o(0, m_o & m_o_mask, 0xffff); } // opcode deviations void tms0970_cpu_device::op_setr() { // SETR: set output register // DDIG line is a coincidence between the selected output pla row(s) and segment pla row(s) int ddig = (~m_opla->read(m_a) & m_o) ? 0 : 1; m_r = (m_r & ~(1 << m_y)) | (ddig << m_y); } void tms0970_cpu_device::op_tdo() { // TDO: transfer digits to output write_o_output(m_a & 0x7); m_write_r(0, m_r & m_r_mask, 0xffff); }