// license:BSD-3-Clause // copyright-holders:Nathan Woods /*** m6809: Portable 6809 emulator ****************************************** Copyright John Butler References: 6809 Simulator V09, By L.C. Benschop, Eindhoven The Netherlands. m6809: Portable 6809 emulator, DS (6809 code in MAME, derived from the 6809 Simulator V09) 6809 Microcomputer Programming & Interfacing with Experiments" by Andrew C. Staugaard, Jr.; Howard W. Sams & Co., Inc. System dependencies: uint16_t must be 16 bit unsigned int uint8_t must be 8 bit unsigned int uint32_t must be more than 16 bits arrays up to 65536 bytes must be supported machine must be twos complement History: July 2016 ErikGav: Unify with 6309 pairs and quads (A+B=D, E+F=W, D+W=Q) March 2013 NPW: Rewrite of 6809/6309/Konami CPU; attempted to make cycle exact. 991026 HJB: Fixed missing calls to cpu_changepc() for the TFR and EXG ocpodes. Replaced m6809_slapstic checks by a macro (CHANGE_PC). ESB still needs the tweaks. 991024 HJB: Tried to improve speed: Using bit7 of cycles1/2 as flag for multi byte opcodes is gone, those opcodes now call fetch_effective_address(). Got rid of the slow/fast flags for stack (S and U) memory accesses. Minor changes to use 32 bit values as arguments to memory functions and added defines for that purpose (e.g. X = 16bit XD = 32bit). 990312 HJB: Added bugfixes according to Aaron's findings. Reset only sets CC_II and CC_IF, DP to zero and PC from reset vector. 990311 HJB: Added _info functions. Now uses static m6808_Regs struct instead of single statics. Changed the 16 bit registers to use the generic PAIR union. Registers defined using macros. Split the core into four execution loops for M6802, M6803, M6808 and HD63701. TST, TSTA and TSTB opcodes reset carry flag. Modified the read/write stack handlers to push LSB first then MSB and pull MSB first then LSB. 990228 HJB: Changed the interrupt handling again. Now interrupts are taken either right at the moment the lines are asserted or whenever an interrupt is enabled and the corresponding line is still asserted. That way the pending_interrupts checks are not needed anymore. However, the CWAI and SYNC flags still need some flags, so I changed the name to 'int_state'. This core also has the code for the old interrupt system removed. 990225 HJB: Cleaned up the code here and there, added some comments. Slightly changed the SAR opcodes (similiar to other CPU cores). Added symbolic names for the flag bits. Changed the way CWAI/Interrupt() handle CPU state saving. A new flag M6809_STATE in pending_interrupts is used to determine if a state save is needed on interrupt entry or already done by CWAI. Added M6809_IRQ_LINE and M6809_FIRQ_LINE defines to m6809.h Moved the internal interrupt_pending flags from m6809.h to m6809.c Changed CWAI cycles2[0x3c] to be 2 (plus all or at least 19 if CWAI actually pushes the entire state). Implemented undocumented TFR/EXG for undefined source and mixed 8/16 bit transfers (they should transfer/exchange the constant $ff). Removed unused jmp/jsr _slap functions from 6809ops.c, m6809_slapstick check moved into the opcode functions. *****************************************************************************/ #include "emu.h" #include "debugger.h" #include "m6809.h" #include "m6809inl.h" //************************************************************************** // PARAMETERS //************************************************************************** #define LOG_INTERRUPTS 0 // turn off 'unreferenced label' errors #if defined(__GNUC__) #pragma GCC diagnostic ignored "-Wunused-label" #endif #ifdef _MSC_VER #pragma warning( disable : 4102 ) #endif //************************************************************************** // DEVICE INTERFACE //************************************************************************** const device_type M6809 = &device_creator; const device_type M6809E = &device_creator; //------------------------------------------------- // m6809_base_device - constructor //------------------------------------------------- m6809_base_device::m6809_base_device(const machine_config &mconfig, const char *name, const char *tag, device_t *owner, uint32_t clock, const device_type type, int divider, const char *shortname, const char *source) : cpu_device(mconfig, type, name, tag, owner, clock, shortname, source), m_lic_func(*this), m_program_config("program", ENDIANNESS_BIG, 8, 16), m_sprogram_config("decrypted_opcodes", ENDIANNESS_BIG, 8, 16), m_clock_divider(divider) { m_mintf = nullptr; } //------------------------------------------------- // device_start - device-specific startup //------------------------------------------------- void m6809_base_device::device_start() { if (!m_mintf) m_mintf = new mi_default; m_mintf->m_program = &space(AS_PROGRAM); m_mintf->m_sprogram = has_space(AS_DECRYPTED_OPCODES) ? &space(AS_DECRYPTED_OPCODES) : m_mintf->m_program; m_mintf->m_direct = &m_mintf->m_program->direct(); m_mintf->m_sdirect = &m_mintf->m_sprogram->direct(); m_lic_func.resolve_safe(); // register our state for the debugger state_add(STATE_GENPCBASE, "CURPC", m_ppc.w).callimport().noshow(); state_add(STATE_GENFLAGS, "CURFLAGS", m_cc).formatstr("%8s").noshow(); state_add(M6809_PC, "PC", m_pc.w).callimport().mask(0xffff); state_add(M6809_S, "S", m_s.w).mask(0xffff); state_add(M6809_CC, "CC", m_cc).mask(0xff); state_add(M6809_DP, "DP", m_dp).mask(0xff); if (is_6809()) { state_add(M6809_A, "A", m_q.r.a).mask(0xff); state_add(M6809_B, "B", m_q.r.b).mask(0xff); state_add(M6809_D, "D", m_q.r.d).mask(0xffff); state_add(M6809_X, "X", m_x.w).mask(0xffff); state_add(M6809_Y, "Y", m_y.w).mask(0xffff); state_add(M6809_U, "U", m_u.w).mask(0xffff); } // initialize variables m_cc = 0; m_pc.w = 0; m_s.w = 0; m_u.w = 0; m_q.q = 0; m_x.w = 0; m_y.w = 0; m_dp = 0; m_reg = 0; m_reg8 = nullptr; m_reg16 = nullptr; // setup regtable save_item(NAME(m_pc.w)); save_item(NAME(m_ppc.w)); save_item(NAME(m_q.q)); save_item(NAME(m_dp)); save_item(NAME(m_u.w)); save_item(NAME(m_s.w)); save_item(NAME(m_x.w)); save_item(NAME(m_y.w)); save_item(NAME(m_cc)); save_item(NAME(m_temp.w)); save_item(NAME(m_opcode)); save_item(NAME(m_nmi_asserted)); save_item(NAME(m_nmi_line)); save_item(NAME(m_firq_line)); save_item(NAME(m_irq_line)); save_item(NAME(m_lds_encountered)); save_item(NAME(m_state)); save_item(NAME(m_ea.w)); save_item(NAME(m_addressing_mode)); save_item(NAME(m_reg)); save_item(NAME(m_cond)); // set our instruction counter m_icountptr = &m_icount; m_icount = 0; } //------------------------------------------------- // device_reset - device-specific reset //------------------------------------------------- void m6809_base_device::device_reset() { m_nmi_line = false; m_nmi_asserted = false; m_firq_line = false; m_irq_line = false; m_lds_encountered = false; m_dp = 0x00; // reset direct page register m_cc |= CC_I; // IRQ disabled m_cc |= CC_F; // FIRQ disabled m_pc.b.h = space(AS_PROGRAM).read_byte(VECTOR_RESET_FFFE + 0); m_pc.b.l = space(AS_PROGRAM).read_byte(VECTOR_RESET_FFFE + 1); // reset sub-instruction state reset_state(); } //------------------------------------------------- // device_pre_save - device-specific pre-save //------------------------------------------------- void m6809_base_device::device_pre_save() { if (m_reg8 == &m_q.r.a) m_reg = M6809_A; else if (m_reg8 == &m_q.r.b) m_reg = M6809_B; else if (m_reg16 == &m_q.p.d) m_reg = M6809_D; else if (m_reg16 == &m_x) m_reg = M6809_X; else if (m_reg16 == &m_y) m_reg = M6809_Y; else if (m_reg16 == &m_u) m_reg = M6809_U; else if (m_reg16 == &m_s) m_reg = M6809_S; else m_reg = 0; } //------------------------------------------------- // device_post_load - device-specific post-load //------------------------------------------------- void m6809_base_device::device_post_load() { m_reg8 = nullptr; m_reg16 = nullptr; switch(m_reg) { case M6809_A: set_regop8(m_q.r.a); break; case M6809_B: set_regop8(m_q.r.b); break; case M6809_D: set_regop16(m_q.p.d); break; case M6809_X: set_regop16(m_x); break; case M6809_Y: set_regop16(m_y); break; case M6809_U: set_regop16(m_u); break; case M6809_S: set_regop16(m_s); break; } } //------------------------------------------------- // memory_space_config - return the configuration // of the specified address space, or nullptr if // the space doesn't exist //------------------------------------------------- const address_space_config *m6809_base_device::memory_space_config(address_spacenum spacenum) const { switch(spacenum) { case AS_PROGRAM: return &m_program_config; case AS_DECRYPTED_OPCODES: return has_configured_map(AS_DECRYPTED_OPCODES) ? &m_sprogram_config : nullptr; default: return nullptr; } } //------------------------------------------------- // state_import - import state into the device, // after it has been set //------------------------------------------------- void m6809_base_device::state_import(const device_state_entry &entry) { switch (entry.index()) { case M6809_PC: m_ppc.w = m_pc.w; break; case STATE_GENPCBASE: m_pc.w = m_ppc.w; break; } } //------------------------------------------------- // state_string_export - export state as a string // for the debugger //------------------------------------------------- void m6809_base_device::state_string_export(const device_state_entry &entry, std::string &str) const { switch (entry.index()) { case STATE_GENFLAGS: str = string_format("%c%c%c%c%c%c%c%c", (m_cc & 0x80) ? 'E' : '.', (m_cc & 0x40) ? 'F' : '.', (m_cc & 0x20) ? 'H' : '.', (m_cc & 0x10) ? 'I' : '.', (m_cc & 0x08) ? 'N' : '.', (m_cc & 0x04) ? 'Z' : '.', (m_cc & 0x02) ? 'V' : '.', (m_cc & 0x01) ? 'C' : '.'); break; } } //------------------------------------------------- // disasm_min_opcode_bytes - return the length // of the shortest instruction, in bytes //------------------------------------------------- uint32_t m6809_base_device::disasm_min_opcode_bytes() const { return 1; } //------------------------------------------------- // disasm_max_opcode_bytes - return the length // of the longest instruction, in bytes //------------------------------------------------- uint32_t m6809_base_device::disasm_max_opcode_bytes() const { return 5; } //------------------------------------------------- // disasm_disassemble - call the disassembly // helper function //------------------------------------------------- offs_t m6809_base_device::disasm_disassemble(char *buffer, offs_t pc, const uint8_t *oprom, const uint8_t *opram, uint32_t options) { extern CPU_DISASSEMBLE( m6809 ); return CPU_DISASSEMBLE_NAME(m6809)(this, buffer, pc, oprom, opram, options); } //************************************************************************** // CORE EXECUTION LOOP //************************************************************************** //------------------------------------------------- // execute_clocks_to_cycles - convert the raw // clock into cycles per second //------------------------------------------------- uint64_t m6809_base_device::execute_clocks_to_cycles(uint64_t clocks) const { return (clocks + m_clock_divider - 1) / m_clock_divider; } //------------------------------------------------- // execute_cycles_to_clocks - convert a cycle // count back to raw clocks //------------------------------------------------- uint64_t m6809_base_device::execute_cycles_to_clocks(uint64_t cycles) const { return cycles * m_clock_divider; } //------------------------------------------------- // execute_min_cycles - return minimum number of // cycles it takes for one instruction to execute //------------------------------------------------- uint32_t m6809_base_device::execute_min_cycles() const { return 1; } //------------------------------------------------- // execute_max_cycles - return maximum number of // cycles it takes for one instruction to execute //------------------------------------------------- uint32_t m6809_base_device::execute_max_cycles() const { return 19; } //------------------------------------------------- // execute_input_lines - return the number of // input/interrupt lines //------------------------------------------------- uint32_t m6809_base_device::execute_input_lines() const { return 3; } //------------------------------------------------- // execute_set_input - act on a changed input/ // interrupt line //------------------------------------------------- void m6809_base_device::execute_set_input(int inputnum, int state) { if (LOG_INTERRUPTS) logerror("%s: inputnum=%s state=%d totalcycles=%d\n", machine().describe_context(), inputnum_string(inputnum), state, (int) attotime_to_clocks(machine().time())); switch(inputnum) { case INPUT_LINE_NMI: // NMI is edge triggered m_nmi_asserted = m_nmi_asserted || ((state != CLEAR_LINE) && !m_nmi_line && m_lds_encountered); m_nmi_line = (state != CLEAR_LINE); break; case M6809_FIRQ_LINE: // FIRQ is line triggered m_firq_line = (state != CLEAR_LINE); break; case M6809_IRQ_LINE: // IRQ is line triggered m_irq_line = (state != CLEAR_LINE); break; } } //------------------------------------------------- // inputnum_string //------------------------------------------------- const char *m6809_base_device::inputnum_string(int inputnum) { switch(inputnum) { case INPUT_LINE_NMI: return "NMI"; case M6809_FIRQ_LINE: return "FIRQ"; case M6809_IRQ_LINE: return "IRQ"; default: return "???"; } } //------------------------------------------------- // read_exgtfr_register //------------------------------------------------- m6809_base_device::exgtfr_register m6809_base_device::read_exgtfr_register(uint8_t reg) { exgtfr_register result; result.byte_value = 0xFF; result.word_value = 0x00FF; switch(reg & 0x0F) { case 0: result.word_value = m_q.r.d; break; // D case 1: result.word_value = m_x.w; break; // X case 2: result.word_value = m_y.w; break; // Y case 3: result.word_value = m_u.w; break; // U case 4: result.word_value = m_s.w; break; // S case 5: result.word_value = m_pc.w; break; // PC case 8: result.byte_value = m_q.r.a; break; // A case 9: result.byte_value = m_q.r.b; break; // B case 10: result.byte_value = m_cc; break; // CC case 11: result.byte_value = m_dp; break; // DP } return result; } //------------------------------------------------- // write_exgtfr_register //------------------------------------------------- void m6809_base_device::write_exgtfr_register(uint8_t reg, m6809_base_device::exgtfr_register value) { switch(reg & 0x0F) { case 0: m_q.r.d = value.word_value; break; // D case 1: m_x.w = value.word_value; break; // X case 2: m_y.w = value.word_value; break; // Y case 3: m_u.w = value.word_value; break; // U case 4: m_s.w = value.word_value; break; // S case 5: m_pc.w = value.word_value; break; // PC case 8: m_q.r.a = value.byte_value; break; // A case 9: m_q.r.b = value.byte_value; break; // B case 10: m_cc = value.byte_value; break; // CC case 11: m_dp = value.byte_value; break; // DP } } //------------------------------------------------- // log_illegal - used to log hits to illegal // instructions (except for HD6309 which traps) //------------------------------------------------- void m6809_base_device::log_illegal() { logerror("%s: illegal opcode at %04x\n", machine().describe_context(), (unsigned) m_pc.w); } //------------------------------------------------- // execute_one - try to execute a single instruction //------------------------------------------------- void m6809_base_device::execute_one() { switch(pop_state()) { #include "cpu/m6809/m6809.hxx" } } //------------------------------------------------- // execute_run - execute a timeslice's worth of // opcodes //------------------------------------------------- void m6809_base_device::execute_run() { do { execute_one(); } while(m_icount > 0); } uint8_t m6809_base_device::mi_default::read(uint16_t adr) { return m_program->read_byte(adr); } uint8_t m6809_base_device::mi_default::read_opcode(uint16_t adr) { return m_sdirect->read_byte(adr); } uint8_t m6809_base_device::mi_default::read_opcode_arg(uint16_t adr) { return m_direct->read_byte(adr); } void m6809_base_device::mi_default::write(uint16_t adr, uint8_t val) { m_program->write_byte(adr, val); } //------------------------------------------------- // m6809_device //------------------------------------------------- m6809_device::m6809_device(const machine_config &mconfig, const char *tag, device_t *owner, uint32_t clock) : m6809_base_device(mconfig, "M6809", tag, owner, clock, M6809, 1, "m6809", __FILE__) { } //------------------------------------------------- // m6809e_device //------------------------------------------------- m6809e_device::m6809e_device(const machine_config &mconfig, const char *tag, device_t *owner, uint32_t clock) : m6809_base_device(mconfig, "M6809E", tag, owner, clock, M6809E, 4, "m6809e", __FILE__) { }