// license:BSD-3-Clause // copyright-holders:Fabio Priuli /********************************************************************** Nintendo Family Computer & Entertainment System Joypads The original Famicom had two hardwired controller, with the second controller slightly different from the first one: it featured no Start nor Select buttons, but had a built-in microphone (with very limited capabilities, since it basically only detected two states: something blowing into it / nothing blowing into it) for some games to react to users "talking" into it Crazy Climber Pads are not really a kind of separate controllers, but just a couple of small sticks to be put on top of d-pads of the regular controllers. Users should then control the game by using both controllers, turned 90 degrees, as a couple of dual sticks like in the arcade control panel. However, we emulate them separately so to map the controls to a friendlier default. The Arcade Stick we emulate is a controller (apparently manufactured by Hori, but possibly licensed by Nintendo, since it use the official logo and brand) which fits into the expansion port and allows to daisy chain a second controller to the first one, to play 4players game (an image of such connection is shown e.g. in Nekketsu Koukou Dodgeball Bu manual) **********************************************************************/ #include "emu.h" #include "joypad.h" //************************************************************************** // DEVICE DEFINITIONS //************************************************************************** DEFINE_DEVICE_TYPE(NES_JOYPAD, nes_joypad_device, "nes_joypad", "Nintendo NES / FC Control Pad") DEFINE_DEVICE_TYPE(NES_FCPAD_P2, nes_fcpad2_device, "nes_fcpad2", "Nintendo Family Computer P2 Pad") DEFINE_DEVICE_TYPE(NES_CCPAD_LEFT, nes_ccpadl_device, "nes_ccpadl", "FC Crazy Climber Left Pad") DEFINE_DEVICE_TYPE(NES_CCPAD_RIGHT, nes_ccpadr_device, "nes_ccpadr", "FC Crazy Climber Right Pad") DEFINE_DEVICE_TYPE(NES_ARCSTICK, nes_arcstick_device, "nes_arcstick", "Nintendo Family Computer Arcade Stick") static INPUT_PORTS_START( nes_joypad ) PORT_START("JOYPAD") PORT_BIT( 0x01, IP_ACTIVE_HIGH, IPT_BUTTON2 ) PORT_NAME("A") PORT_BIT( 0x02, IP_ACTIVE_HIGH, IPT_BUTTON1 ) PORT_NAME("B") PORT_BIT( 0x04, IP_ACTIVE_HIGH, IPT_SELECT ) PORT_BIT( 0x08, IP_ACTIVE_HIGH, IPT_START ) PORT_BIT( 0x10, IP_ACTIVE_HIGH, IPT_JOYSTICK_UP ) PORT_8WAY PORT_BIT( 0x20, IP_ACTIVE_HIGH, IPT_JOYSTICK_DOWN ) PORT_8WAY PORT_BIT( 0x40, IP_ACTIVE_HIGH, IPT_JOYSTICK_LEFT ) PORT_8WAY PORT_BIT( 0x80, IP_ACTIVE_HIGH, IPT_JOYSTICK_RIGHT ) PORT_8WAY INPUT_PORTS_END static INPUT_PORTS_START( nes_fcpad_p2 ) PORT_START("JOYPAD") PORT_BIT( 0x01, IP_ACTIVE_HIGH, IPT_BUTTON2 ) PORT_NAME("A") PORT_BIT( 0x02, IP_ACTIVE_HIGH, IPT_BUTTON1 ) PORT_NAME("B") PORT_BIT( 0x04, IP_ACTIVE_HIGH, IPT_SELECT ) PORT_NAME("Microphone") PORT_BIT( 0x08, IP_ACTIVE_HIGH, IPT_UNUSED ) PORT_BIT( 0x10, IP_ACTIVE_HIGH, IPT_JOYSTICK_UP ) PORT_8WAY PORT_BIT( 0x20, IP_ACTIVE_HIGH, IPT_JOYSTICK_DOWN ) PORT_8WAY PORT_BIT( 0x40, IP_ACTIVE_HIGH, IPT_JOYSTICK_LEFT ) PORT_8WAY PORT_BIT( 0x80, IP_ACTIVE_HIGH, IPT_JOYSTICK_RIGHT ) PORT_8WAY INPUT_PORTS_END static INPUT_PORTS_START( nes_ccpad_left ) PORT_START("JOYPAD") PORT_BIT( 0x01, IP_ACTIVE_HIGH, IPT_UNUSED ) PORT_BIT( 0x02, IP_ACTIVE_HIGH, IPT_UNUSED ) PORT_BIT( 0x04, IP_ACTIVE_HIGH, IPT_SELECT ) PORT_BIT( 0x08, IP_ACTIVE_HIGH, IPT_START ) PORT_BIT( 0x10, IP_ACTIVE_HIGH, IPT_JOYSTICKLEFT_RIGHT ) PORT_8WAY PORT_BIT( 0x20, IP_ACTIVE_HIGH, IPT_JOYSTICKLEFT_LEFT ) PORT_8WAY PORT_BIT( 0x40, IP_ACTIVE_HIGH, IPT_JOYSTICKLEFT_UP ) PORT_8WAY PORT_BIT( 0x80, IP_ACTIVE_HIGH, IPT_JOYSTICKLEFT_DOWN ) PORT_8WAY INPUT_PORTS_END static INPUT_PORTS_START( nes_ccpad_right ) PORT_START("JOYPAD") PORT_BIT( 0x01, IP_ACTIVE_HIGH, IPT_UNUSED ) PORT_BIT( 0x02, IP_ACTIVE_HIGH, IPT_UNUSED ) PORT_BIT( 0x04, IP_ACTIVE_HIGH, IPT_UNUSED ) PORT_BIT( 0x08, IP_ACTIVE_HIGH, IPT_UNUSED ) PORT_BIT( 0x10, IP_ACTIVE_HIGH, IPT_JOYSTICKRIGHT_RIGHT ) PORT_8WAY PORT_BIT( 0x20, IP_ACTIVE_HIGH, IPT_JOYSTICKRIGHT_LEFT ) PORT_8WAY PORT_BIT( 0x40, IP_ACTIVE_HIGH, IPT_JOYSTICKRIGHT_UP ) PORT_8WAY PORT_BIT( 0x80, IP_ACTIVE_HIGH, IPT_JOYSTICKRIGHT_DOWN ) PORT_8WAY INPUT_PORTS_END static INPUT_PORTS_START( nes_arcstick ) PORT_START("CONFIG") PORT_CONFNAME( 0x01, 0x01, "4 Way / 8 Way Joystick") PORT_CONFSETTING( 0x00, "4 Way" ) PORT_CONFSETTING( 0x01, "8 Way" ) PORT_CONFNAME( 0x02, 0x00, "Player ID") PORT_CONFSETTING( 0x00, "Player I" ) PORT_CONFSETTING( 0x02, "Player II" ) PORT_START("JOYPAD") PORT_BIT( 0x01, IP_ACTIVE_HIGH, IPT_BUTTON2 ) PORT_NAME("A") PORT_BIT( 0x02, IP_ACTIVE_HIGH, IPT_BUTTON1 ) PORT_NAME("B") PORT_BIT( 0x04, IP_ACTIVE_HIGH, IPT_SELECT ) PORT_BIT( 0x08, IP_ACTIVE_HIGH, IPT_START ) PORT_BIT( 0x10, IP_ACTIVE_HIGH, IPT_JOYSTICK_UP ) PORT_8WAY PORT_CONDITION("CONFIG", 0x01, EQUALS, 0x01) PORT_BIT( 0x20, IP_ACTIVE_HIGH, IPT_JOYSTICK_DOWN ) PORT_8WAY PORT_CONDITION("CONFIG", 0x01, EQUALS, 0x01) PORT_BIT( 0x40, IP_ACTIVE_HIGH, IPT_JOYSTICK_LEFT ) PORT_8WAY PORT_CONDITION("CONFIG", 0x01, EQUALS, 0x01) PORT_BIT( 0x80, IP_ACTIVE_HIGH, IPT_JOYSTICK_RIGHT ) PORT_8WAY PORT_CONDITION("CONFIG", 0x01, EQUALS, 0x01) PORT_BIT( 0x10, IP_ACTIVE_HIGH, IPT_JOYSTICK_UP ) PORT_4WAY PORT_CONDITION("CONFIG", 0x01, EQUALS, 0x00) PORT_BIT( 0x20, IP_ACTIVE_HIGH, IPT_JOYSTICK_DOWN ) PORT_4WAY PORT_CONDITION("CONFIG", 0x01, EQUALS, 0x00) PORT_BIT( 0x40, IP_ACTIVE_HIGH, IPT_JOYSTICK_LEFT ) PORT_4WAY PORT_CONDITION("CONFIG", 0x01, EQUALS, 0x00) PORT_BIT( 0x80, IP_ACTIVE_HIGH, IPT_JOYSTICK_RIGHT ) PORT_4WAY PORT_CONDITION("CONFIG", 0x01, EQUALS, 0x00) INPUT_PORTS_END //------------------------------------------------- // input_ports - device-specific input ports //------------------------------------------------- ioport_constructor nes_joypad_device::device_input_ports() const { return INPUT_PORTS_NAME( nes_joypad ); } ioport_constructor nes_fcpad2_device::device_input_ports() const { return INPUT_PORTS_NAME( nes_fcpad_p2 ); } ioport_constructor nes_ccpadl_device::device_input_ports() const { return INPUT_PORTS_NAME( nes_ccpad_left ); } ioport_constructor nes_ccpadr_device::device_input_ports() const { return INPUT_PORTS_NAME( nes_ccpad_right ); } ioport_constructor nes_arcstick_device::device_input_ports() const { return INPUT_PORTS_NAME( nes_arcstick ); } static void arcstick_daisy(device_slot_interface &device) { device.option_add("arcstick", NES_ARCSTICK); } //------------------------------------------------- // device_add_mconfig - add device configuration //------------------------------------------------- void nes_arcstick_device::device_add_mconfig(machine_config &config) { // expansion port to allow daisy chaining NES_CONTROL_PORT(config, m_daisychain, arcstick_daisy, nullptr); if (m_port != nullptr) m_daisychain->set_screen_tag(m_port->m_screen); } //************************************************************************** // LIVE DEVICE //************************************************************************** //------------------------------------------------- // nes_joypad_device - constructor //------------------------------------------------- nes_joypad_device::nes_joypad_device(const machine_config &mconfig, device_type type, const char *tag, device_t *owner, uint32_t clock) : device_t(mconfig, type, tag, owner, clock), device_nes_control_port_interface(mconfig, *this), m_joypad(*this, "JOYPAD"), m_latch(0) { } nes_joypad_device::nes_joypad_device(const machine_config &mconfig, const char *tag, device_t *owner, uint32_t clock) : nes_joypad_device(mconfig, NES_JOYPAD, tag, owner, clock) { } nes_fcpad2_device::nes_fcpad2_device(const machine_config &mconfig, const char *tag, device_t *owner, uint32_t clock) : nes_joypad_device(mconfig, NES_FCPAD_P2, tag, owner, clock) { } nes_ccpadl_device::nes_ccpadl_device(const machine_config &mconfig, const char *tag, device_t *owner, uint32_t clock) : nes_joypad_device(mconfig, NES_CCPAD_LEFT, tag, owner, clock) { } nes_ccpadr_device::nes_ccpadr_device(const machine_config &mconfig, const char *tag, device_t *owner, uint32_t clock) : nes_joypad_device(mconfig, NES_CCPAD_RIGHT, tag, owner, clock) { } nes_arcstick_device::nes_arcstick_device(const machine_config &mconfig, const char *tag, device_t *owner, uint32_t clock) : nes_joypad_device(mconfig, NES_ARCSTICK, tag, owner, clock), m_daisychain(*this, "subexp"), m_cfg(*this, "CONFIG") { } //------------------------------------------------- // device_start //------------------------------------------------- void nes_joypad_device::device_start() { save_item(NAME(m_latch)); } //------------------------------------------------- // device_reset //------------------------------------------------- void nes_joypad_device::device_reset() { m_latch = 0; } //------------------------------------------------- // read //------------------------------------------------- uint8_t nes_joypad_device::read_bit0() { uint8_t ret = m_latch & 1; m_latch >>= 1; return ret; } uint8_t nes_fcpad2_device::read_exp(offs_t offset) { uint8_t ret = 0; if (!offset) // microphone input ret |= m_joypad->read() & 0x04; return ret; } // NOTE: I haven't found any documentation about what happens when // users connect two arcade stick both set as P1 or P2 in config. // does the FC only acknowledge the first one, or do they conflict // with each other? currently, we only support the following setup: // if the first pad is set as P1, the daisy chained pad is checked // for P2 only, and vice versa. uint8_t nes_arcstick_device::read_exp(offs_t offset) { uint8_t ret = 0; if (offset == 0) //$4016 { if ((m_cfg->read() & 2) == 0) // we are P1 input { ret |= (m_latch & 1) << 1; m_latch >>= 1; } else ret |= m_daisychain->read_exp(0); } else //$4017 { if ((m_cfg->read() & 2) == 2) // we are P2 input { ret |= (m_latch & 1) << 1; m_latch >>= 1; } else ret |= m_daisychain->read_exp(1); } return ret; } //------------------------------------------------- // write //------------------------------------------------- void nes_joypad_device::write(uint8_t data) { if (data & 0x01) return; m_latch = m_joypad->read(); } void nes_fcpad2_device::write(uint8_t data) { if (data & 0x01) return; // microphone is hooked to expansion bits, not to the controller bit m_latch = m_joypad->read() & ~0x04; } void nes_arcstick_device::write(uint8_t data) { m_daisychain->write(data); if (data & 0x01) return; m_latch = m_joypad->read(); }