// license:BSD-3-Clause // copyright-holders:Fabio Priuli /*********************************************************************************************************** NES/Famicom cartridge emulation for Action 53 Here we emulate the Multi-Discrete PCB designed by Tepples for this homebew multicart [mapper 28] ***********************************************************************************************************/ #include "emu.h" #include "act53.h" #ifdef NES_PCB_DEBUG #define VERBOSE 1 #else #define VERBOSE 0 #endif #define LOG_MMC(x) do { if (VERBOSE) logerror x; } while (0) //------------------------------------------------- // constructor //------------------------------------------------- const device_type NES_ACTION53 = &device_creator; nes_action53_device::nes_action53_device(const machine_config &mconfig, const char *tag, device_t *owner, UINT32 clock) : nes_nrom_device(mconfig, NES_ACTION53, "NES Cart Action 53 PCB", tag, owner, clock, "nes_action53", __FILE__), m_sel(0) { } void nes_action53_device::device_start() { common_start(); save_item(NAME(m_sel)); save_item(NAME(m_reg)); m_reg[0] = 0x00; m_reg[1] = 0x0f; m_reg[2] = 0x00; m_reg[3] = 0x3f; } void nes_action53_device::pcb_reset() { m_chr_source = m_vrom_chunks ? CHRROM : CHRRAM; // register content is not touched by reset update_prg(); } /*------------------------------------------------- mapper specific handlers -------------------------------------------------*/ /*------------------------------------------------- Board ACTION 53 In MESS: *VERY* preliminary support. This board uses 4 registers (reg is selected by writes to 0x5xxx) Info from nesdev wiki R:$00: [...M ..CC] C = CHR Reg M = Mirroring This bit overwrites bit 0 of R:$80, but only if bit 1 of R:$80 is clear R:$01: [...M PPPP] P = PRG Reg M = Mirroring This bit overwrites bit 0 of R:$80, but only if bit 1 of R:$80 is clear R:$80: [..GG PSMM] G = Game Size (0=32K, 1=64K, 2=128K, 3=256K) P = PRG Size (0=32k mode, 1=16k mode) S = Slot select: 0 = $C000 swappable, $8000 fixed to bottom of 32K outer bank 1 = $8000 swappable, $C000 fixed to top of 32K outer bank This bit is ignored when 'P' is clear (32k mode) M = Mirroring control: %00 = 1ScA %01 = 1ScB %10 = Vert %11 = Horz R:$81: [..BB BBBB] Outer PRG Reg -------------------------------------------------*/ void nes_action53_device::update_prg() { UINT8 prg_lo, prg_hi, helper; UINT8 out = (m_reg[3] & 0x3f) << 1; // Outer PRG reg UINT8 size = (m_reg[2] & 0x30) >> 4; // Game size UINT8 mask = (1 << (size + 1)) - 1; // Bits to be taken from PRG reg if (!BIT(m_reg[2], 3)) { helper = (out & ~mask) | ((m_reg[1] << 1) & mask); //32K mode prg_lo = (helper & 0xfe); prg_hi = (helper | 0x01); } else { helper = (out & ~mask) | (m_reg[1] & mask); if (BIT(m_reg[2], 2)) { //16K mode with fixed HI prg_lo = helper; prg_hi = (out | 0x01); } else { //16K mode with fixed LO prg_lo = (out & 0xfe); prg_hi = helper; } } // printf("banks : 0x%2X - 0x%2X\n", prg_lo, prg_hi); prg16_89ab(prg_lo); prg16_cdef(prg_hi); } void nes_action53_device::update_mirr() { switch (m_reg[2] & 0x03) { case 0: set_nt_mirroring(PPU_MIRROR_LOW); break; case 1: set_nt_mirroring(PPU_MIRROR_HIGH); break; case 2: set_nt_mirroring(PPU_MIRROR_VERT); break; case 3: set_nt_mirroring(PPU_MIRROR_HORZ); break; } } WRITE8_MEMBER(nes_action53_device::write_l) { LOG_MMC(("action 53 write_l, offset: %04x, data: %02x\n", offset, data)); offset += 0x100; if (offset >= 0x1000) m_sel = BIT(data, 0) | (BIT(data, 7) << 1); } WRITE8_MEMBER(nes_action53_device::write_h) { LOG_MMC(("action 53 write_h, offset: %04x, data: %02x\n", offset, data)); if (m_reg[m_sel] != data) { m_reg[m_sel] = data; switch (m_sel) { case 0: if (!BIT(m_reg[2],1)) { m_reg[2] &= 0xfe; m_reg[2] |= BIT(data,4); update_mirr(); } chr8(m_reg[0] & 0x03, m_chr_source); break; case 1: if (!BIT(m_reg[2],1)) { m_reg[2] &= 0xfe; m_reg[2] |= BIT(data,4); update_mirr(); } update_prg(); break; case 2: update_prg(); update_mirr(); break; case 3: update_prg(); break; } } }