// license:BSD-3-Clause // copyright-holders:Patrick Mackinlay /* * Labtam 3000 Z80 SBC card. * * Sources: * - https://arvutimuuseum.ut.ee/index.php?m=eksponaadid&id=223 * * TODO: * - serial */ /* * Part Type Function * ---- ---- -------- * MCM93422PC * 3 256x4 RAM memory mapper (8 maps of 32, 12-bit entries) * M5K4164ANP * 16 64x1 DRAM 128KiB main memory * M58725P 2048x8 SRAM resident bus RAM * WD2793A-PL02 floppy disk formatter/controller * Z80A CPU * Z80A DMA * 2 fdc and sio dma * Z80A SIO/2 * AM9513PC system timing controller * MM58167AN real time clock * AM9519APC universal interrupt controller * * D8203-1 DRAM controller * AM2946PC * 4 * DP8304BN * * 25MHz * 20MHz * 8MHz */ #include "emu.h" #include "labtam_z80sbc.h" #define VERBOSE 0 #include "logmacro.h" enum map_mux_mask : u8 { MM_ENB = 0x01, // mapper enabled MM_INT = 0x02, // interrupt map mode selected (mapnum=0) MM_PND = 0x04, // map mode change pending next non-instruction memory read }; enum mapwr1_mask : u8 { MAPWR1_MA19 = 0x10, // multibus address bit 19 MAPWR1_WP = 0x20, // write protect MAPWR1_MEM = 0x40, // memory access MAPWR1_RESB = 0x80, // resident bus select }; enum drvstatus_mask : u8 { DRVSTATUS_A = 0x01, // FD0 is mini floppy DRVSTATUS_C = 0x02, // FD1 is mini floppy DRVSTATUS_E = 0x04, // FD2 is mini floppy DRVSTATUS_G = 0x08, // FD3 is mini floppy DRVSTATUS_B = 0x10, // not used DRVSTATUS_D = 0x20, // not used DRVSTATUS_F = 0x40, // ? DRVSTATUS_DS = 0x80, // floppy is double-sided }; DEFINE_DEVICE_TYPE(LABTAM_Z80SBC, labtam_z80sbc_device, "labtam_z80sbc", "Labtam Z80 SBC") labtam_z80sbc_device::labtam_z80sbc_device(machine_config const &mconfig, char const *tag, device_t *owner, const XTAL &clock) : device_t(mconfig, LABTAM_Z80SBC, tag, owner, clock) , device_multibus_interface(mconfig, *this) , m_cpu(*this, "cpu") , m_stc(*this, "stc") , m_uic(*this, "uic") , m_rtc(*this, "rtc") , m_fdc(*this, "fdc") , m_dma(*this, "dma%u", 0U) , m_sio(*this, "sio") , m_int(*this, "int") , m_fdd(*this, "fdd%u", 0U) , m_eprom(*this, "eprom%u", 0U) , m_e15(*this, "E15%c", 'A') , m_e21(*this, "E21") , m_installed(false) { } ROM_START(labtam_z80sbc) ROM_REGION(0x2000, "eprom0", 0) ROM_LOAD("z80_boot__a85_0.u59", 0x0000, 0x2000, CRC(4453c938) SHA1(b04987a07ff7e21f7eb354162ad14b59d17096dd)) ROM_REGION(0x2000, "eprom1", 0) ROM_LOAD("z80_boot__a85_1.u53", 0x0000, 0x2000, CRC(b7d489ea) SHA1(5bd6f3dd1c1f6f3e07706293bfc46a9bfc43d1f2)) ROM_END static INPUT_PORTS_START(labtam_z80sbc) PORT_START("E15A") PORT_DIPNAME(0x00f0, 0x00f0, "I/O Low") PORT_DIPSETTING(0x0000, "0000h") PORT_DIPSETTING(0x0010, "0010h") PORT_DIPSETTING(0x0020, "0020h") PORT_DIPSETTING(0x0030, "0030h") PORT_DIPSETTING(0x0040, "0040h") PORT_DIPSETTING(0x0050, "0050h") PORT_DIPSETTING(0x0060, "0060h") PORT_DIPSETTING(0x0070, "0070h") PORT_DIPSETTING(0x0080, "0080h") PORT_DIPSETTING(0x0090, "0090h") PORT_DIPSETTING(0x00a0, "00a0h") PORT_DIPSETTING(0x00b0, "00b0h") PORT_DIPSETTING(0x00c0, "00c0h") PORT_DIPSETTING(0x00d0, "00d0h") PORT_DIPSETTING(0x00e0, "00e0h") PORT_DIPSETTING(0x00f0, "00f0h") PORT_START("E15B") PORT_DIPNAME(0x0f00, 0x0000, "I/O Middle") PORT_DIPSETTING(0x0000, "0000h") PORT_DIPSETTING(0x0100, "0100h") PORT_DIPSETTING(0x0200, "0200h") PORT_DIPSETTING(0x0300, "0300h") PORT_DIPSETTING(0x0400, "0400h") PORT_DIPSETTING(0x0500, "0500h") PORT_DIPSETTING(0x0600, "0600h") PORT_DIPSETTING(0x0700, "0700h") PORT_DIPSETTING(0x0800, "0800h") PORT_DIPSETTING(0x0900, "0900h") PORT_DIPSETTING(0x0a00, "0a00h") PORT_DIPSETTING(0x0b00, "0b00h") PORT_DIPSETTING(0x0c00, "0c00h") PORT_DIPSETTING(0x0d00, "0d00h") PORT_DIPSETTING(0x0e00, "0e00h") PORT_DIPSETTING(0x0f00, "0f00h") PORT_START("E15C") PORT_DIPNAME(0xf000, 0x0000, "I/O High") PORT_DIPSETTING(0x0000, "0000h") PORT_DIPSETTING(0x1000, "1000h") PORT_DIPSETTING(0x2000, "2000h") PORT_DIPSETTING(0x3000, "3000h") PORT_DIPSETTING(0x4000, "4000h") PORT_DIPSETTING(0x5000, "5000h") PORT_DIPSETTING(0x6000, "6000h") PORT_DIPSETTING(0x7000, "7000h") PORT_DIPSETTING(0x8000, "8000h") PORT_DIPSETTING(0x9000, "9000h") PORT_DIPSETTING(0xa000, "a000h") PORT_DIPSETTING(0xb000, "b000h") PORT_DIPSETTING(0xc000, "c000h") PORT_DIPSETTING(0xd000, "d000h") PORT_DIPSETTING(0xe000, "e000h") PORT_DIPSETTING(0xf000, "f000h") PORT_START("E15D") PORT_DIPNAME(0xf0000, 0xf0000, "Memory Bank 1") PORT_DIPSETTING(0x00000, "00000h") PORT_DIPSETTING(0x10000, "10000h") PORT_DIPSETTING(0x20000, "20000h") PORT_DIPSETTING(0x30000, "30000h") PORT_DIPSETTING(0x40000, "40000h") PORT_DIPSETTING(0x50000, "50000h") PORT_DIPSETTING(0x60000, "60000h") PORT_DIPSETTING(0x70000, "70000h") PORT_DIPSETTING(0x80000, "80000h") PORT_DIPSETTING(0x90000, "90000h") PORT_DIPSETTING(0xa0000, "a0000h") PORT_DIPSETTING(0xb0000, "b0000h") PORT_DIPSETTING(0xc0000, "c0000h") PORT_DIPSETTING(0xd0000, "d0000h") PORT_DIPSETTING(0xe0000, "e0000h") PORT_DIPSETTING(0xf0000, "f0000h") PORT_START("E15E") PORT_DIPNAME(0xf0000, 0xe0000, "Memory Bank 0") PORT_DIPSETTING(0x00000, "00000h") PORT_DIPSETTING(0x10000, "10000h") PORT_DIPSETTING(0x20000, "20000h") PORT_DIPSETTING(0x30000, "30000h") PORT_DIPSETTING(0x40000, "40000h") PORT_DIPSETTING(0x50000, "50000h") PORT_DIPSETTING(0x60000, "60000h") PORT_DIPSETTING(0x70000, "70000h") PORT_DIPSETTING(0x80000, "80000h") PORT_DIPSETTING(0x90000, "90000h") PORT_DIPSETTING(0xa0000, "a0000h") PORT_DIPSETTING(0xb0000, "b0000h") PORT_DIPSETTING(0xc0000, "c0000h") PORT_DIPSETTING(0xd0000, "d0000h") PORT_DIPSETTING(0xe0000, "e0000h") PORT_DIPSETTING(0xf0000, "f0000h") PORT_START("E21") PORT_DIPNAME(0x01, 0x01, "FD0 is 5.25\"") PORT_DIPLOCATION("E21:1") PORT_DIPSETTING(0x00, DEF_STR(Yes)) PORT_DIPSETTING(0x01, DEF_STR(No)) PORT_DIPNAME(0x02, 0x00, "FD1 is 5.25\"") PORT_DIPLOCATION("E21:3") PORT_DIPSETTING(0x00, DEF_STR(Yes)) PORT_DIPSETTING(0x02, DEF_STR(No)) PORT_DIPNAME(0x04, 0x00, "FD2 is 5.25\"") PORT_DIPLOCATION("E21:5") PORT_DIPSETTING(0x00, DEF_STR(Yes)) PORT_DIPSETTING(0x04, DEF_STR(No)) PORT_DIPNAME(0x08, 0x08, "FD3 is 5.25\"") PORT_DIPLOCATION("E21:7") PORT_DIPSETTING(0x00, DEF_STR(Yes)) PORT_DIPSETTING(0x08, DEF_STR(No)) PORT_DIPUNUSED_DIPLOC(0x70, 0x70, "E21:2,4,6") INPUT_PORTS_END const tiny_rom_entry *labtam_z80sbc_device::device_rom_region() const { return ROM_NAME(labtam_z80sbc); } ioport_constructor labtam_z80sbc_device::device_input_ports() const { return INPUT_PORTS_NAME(labtam_z80sbc); } void labtam_z80sbc_device::device_resolve_objects() { // TODO: Multibus interrupt lines may optionally be wire-wrapped to // Am9517 interrupt request inputs 0, 1, 3 or 7. } void labtam_z80sbc_device::device_start() { m_ram0 = std::make_unique(0x10000); m_ram1 = std::make_unique(0x10000); m_sram = std::make_unique(0x800); m_map_lo = std::make_unique(256); m_map_hi = std::make_unique(256); save_pointer(NAME(m_ram0), 0x10000); save_pointer(NAME(m_ram1), 0x10000); save_pointer(NAME(m_sram), 0x800); save_pointer(NAME(m_map_lo), 256); save_pointer(NAME(m_map_hi), 256); save_item(NAME(m_map_mux)); save_item(NAME(m_map_num)); save_item(NAME(m_map_cnt)); } void labtam_z80sbc_device::device_reset() { if (!m_installed) { u32 const ram0_select = m_e15[4]->read(); u32 const ram1_select = m_e15[3]->read(); m_bus->space(AS_PROGRAM).install_ram(ram0_select, ram0_select | 0xffff, m_ram0.get()); m_bus->space(AS_PROGRAM).install_ram(ram1_select, ram1_select | 0xffff, m_ram0.get()); u16 const pio_select = m_e15[2]->read() | m_e15[1]->read() | m_e15[0]->read(); m_bus->space(AS_IO).install_write_handler(pio_select | 0, pio_select | 0, write8smo_delegate(*this, FUNC(labtam_z80sbc_device::fdcclr_w))); m_bus->space(AS_IO).install_write_handler(pio_select | 2, pio_select | 2, write8smo_delegate(*this, FUNC(labtam_z80sbc_device::netclr_w))); m_bus->space(AS_IO).install_write_handler(pio_select | 4, pio_select | 4, write8smo_delegate(*this, FUNC(labtam_z80sbc_device::fdcattn_w))); m_bus->space(AS_IO).install_read_handler(pio_select | 8, pio_select | 8, read8smo_delegate(*this, FUNC(labtam_z80sbc_device::fdcstatus_r))); m_installed = true; } m_map_mux = 0; m_map_num = 0; m_map_cnt = 0; m_fdcstatus = 0x3c; m_dma[0]->iei_w(1); } static void z80sbc_floppies(device_slot_interface &device) { device.option_add("dssd5", FLOPPY_525_SD); device.option_add("dsdd5", FLOPPY_525_DD); device.option_add("dssd8", FLOPPY_8_DSSD); device.option_add("dsdd8", FLOPPY_8_DSDD); } static const z80_daisy_config daisy_chain[] = { { "dma0" }, { "dma1" }, { "sio" }, { nullptr } }; void labtam_z80sbc_device::device_add_mconfig(machine_config &config) { Z80(config, m_cpu, 20_MHz_XTAL / 4); m_cpu->set_addrmap(AS_PROGRAM, &labtam_z80sbc_device::cpu_mem); m_cpu->set_addrmap(AS_IO, &labtam_z80sbc_device::cpu_pio); m_cpu->irqack_cb().set([this](int state) { m_map_mux |= MM_PND; }); m_cpu->set_daisy_config(daisy_chain); m_cpu->set_irq_acknowledge_callback(m_uic, FUNC(am9519_device::iack_cb)); INPUT_MERGER_ANY_HIGH(config, m_int); m_int->output_handler().set_inputline(m_cpu, INPUT_LINE_IRQ0); /* * The Z80DMAs, Z80SIO and Am9519 are all connected to the Z80 /INT line, * with EI/EO lines used to control request priority. The Am9519 does not * support the full Z80 IM2 interrupt protocol and the RETI instruction is * not used by the system firmware. * * This logic is emulated using an input merger for the interrupt line, a * Z80 daisy-chain for the DMA and SIO devices and a regular interrupt * acknowledge callback handler for the UIC. This has the side-effect of * making the UIC the lowest-priority device despite not emulating and * connecting its EI/EO lines. */ Z80DMA(config, m_dma[0], 20_MHz_XTAL / 4); m_dma[0]->out_int_callback().set(m_int, FUNC(input_merger_any_high_device::in_w<0>)); m_dma[0]->out_ieo_callback().set(m_dma[1], FUNC(z80dma_device::iei_w)); m_dma[0]->out_busreq_callback().set(m_dma[0], FUNC(z80dma_device::bai_w)); m_dma[0]->in_mreq_callback().set(FUNC(labtam_z80sbc_device::map_r<7>)); m_dma[0]->out_mreq_callback().set(FUNC(labtam_z80sbc_device::map_w<7>)); m_dma[0]->in_iorq_callback().set(m_fdc, FUNC(wd2793_device::data_r)); m_dma[0]->out_iorq_callback().set(m_fdc, FUNC(wd2793_device::data_w)); Z80DMA(config, m_dma[1], 20_MHz_XTAL / 4); m_dma[1]->out_int_callback().set(m_int, FUNC(input_merger_any_high_device::in_w<1>)); //m_dma[1]->out_ieo_callback().set(m_sio, FUNC(z80sio_device::iei_w)); m_dma[1]->out_busreq_callback().set(m_dma[1], FUNC(z80dma_device::bai_w)); m_dma[1]->in_mreq_callback().set(FUNC(labtam_z80sbc_device::map_r<7>)); m_dma[1]->out_mreq_callback().set(FUNC(labtam_z80sbc_device::map_w<7>)); // TODO: implement iei/ieo on z80sio Z80SIO(config, m_sio, 20_MHz_XTAL / 4); m_sio->out_int_callback().set(m_int, FUNC(input_merger_any_high_device::in_w<2>)); //m_sio->out_ieo_callback().set(m_uic, FUNC(am9519_device::iei_w)); // TODO: implement iei/ieo on am9519 AM9519(config, m_uic); m_uic->out_int_callback().set(m_int, FUNC(input_merger_any_high_device::in_w<3>)); WD2793(config, m_fdc, XTAL::u(2'000'000)); m_fdc->intrq_wr_callback().set(FUNC(labtam_z80sbc_device::fdcint_w)); m_fdc->drq_wr_callback().set(m_dma[0], FUNC(z80dma_device::rdy_w)); // WD1002 irq -> Am9519 ireq3 AM9513(config, m_stc, XTAL::u(4'000'000)); m_stc->out4_cb().set(m_uic, FUNC(am9519_device::ireq5_w)); MM58167(config, m_rtc, 32.768_kHz_XTAL); m_rtc->irq().set(m_uic, FUNC(am9519_device::ireq6_w)); FLOPPY_CONNECTOR(config, m_fdd[0], z80sbc_floppies, "dsdd8", floppy_image_device::default_mfm_floppy_formats).enable_sound(true); FLOPPY_CONNECTOR(config, m_fdd[1], z80sbc_floppies, nullptr, floppy_image_device::default_mfm_floppy_formats).enable_sound(true); FLOPPY_CONNECTOR(config, m_fdd[2], z80sbc_floppies, nullptr, floppy_image_device::default_mfm_floppy_formats).enable_sound(true); FLOPPY_CONNECTOR(config, m_fdd[3], z80sbc_floppies, nullptr, floppy_image_device::default_mfm_floppy_formats).enable_sound(true); } void labtam_z80sbc_device::cpu_mem(address_map &map) { /* * Resident Bus Decoding * 2000..27ff sram * 4000..5fff eprom 1 * e000..ffff eprom 0 */ map(0x0000, 0xffff).rw(FUNC(labtam_z80sbc_device::mem_r), FUNC(labtam_z80sbc_device::mem_w)); } void labtam_z80sbc_device::cpu_pio(address_map &map) { map(0x0000, 0x0000).lw8([this](u8 data) { LOG("fdcset 0x%02x (%s)\n", data, machine().describe_context()); }, "fdcset"); //map(0x0008, 0x0008); // TODO: serset: set sio interrupt map(0x0010, 0x0010).select(0xff00).lw8([this](offs_t offset, u8 data) { m_map_lo[offset >> 8] = data; }, "mapwr0"); map(0x0018, 0x0018).select(0xff00).lw8([this](offs_t offset, u8 data) { m_map_hi[offset >> 8] = data & 0xf0; }, "mapwr1"); map(0x0020, 0x0020).mirror(0xff00).w(FUNC(labtam_z80sbc_device::intswt_w)); map(0x0028, 0x0028).mirror(0xff00).w(FUNC(labtam_z80sbc_device::mapnum_w)); map(0x0030, 0x0037).mirror(0xff00).w(FUNC(labtam_z80sbc_device::drive_w)); map(0x0038, 0x0038).mirror(0xff00).lw8([this](u8 data) { LOG("reset drive fault\n"); }, "fltrest"); map(0x0040, 0x0043).mirror(0xff00).rw(m_fdc, FUNC(wd2793_device::read), FUNC(wd2793_device::write)); map(0x0048, 0x004b).mirror(0xff00).rw(m_sio, FUNC(z80sio_device::ba_cd_r), FUNC(z80sio_device::ba_cd_w)); map(0x0050, 0x0051).mirror(0xff00).rw(m_stc, FUNC(am9513_device::read8), FUNC(am9513_device::write8)); map(0x0058, 0x0058).mirror(0xff00).rw(m_uic, FUNC(am9519_device::data_r), FUNC(am9519_device::data_w)); map(0x0059, 0x0059).mirror(0xff00).rw(m_uic, FUNC(am9519_device::stat_r), FUNC(am9519_device::cmd_w)); //map(0x0060, 0x0067); // TODO: wd1001 map(0x0068, 0x0068).mirror(0xff00).r(FUNC(labtam_z80sbc_device::drvstatus_r)); map(0x0070, 0x0070).select(0xff00).lr8([this](offs_t offset) { return m_map_lo[offset >> 8]; }, "maprd0"); map(0x0078, 0x0078).select(0xff00).lr8([this](offs_t offset) { return m_map_hi[offset >> 8] | m_map_num; }, "maprd1"); map(0x0080, 0x0080).mirror(0xff00).rw(m_dma[0], FUNC(z80dma_device::read), FUNC(z80dma_device::write)); map(0x00a0, 0x00a0).mirror(0xff00).rw(m_dma[1], FUNC(z80dma_device::read), FUNC(z80dma_device::write)); map(0x00e0, 0x00ff).mirror(0xff00).rw(m_rtc, FUNC(mm58167_device::read), FUNC(mm58167_device::write)); } u8 labtam_z80sbc_device::mem_r(offs_t offset) { // check for and complete pending map number change if ((m_map_mux & MM_PND) && !machine().side_effects_disabled()) { if (m_map_cnt == 0) { m_map_mux &= ~MM_PND; m_map_mux ^= MM_INT; } else m_map_cnt--; } if (m_map_mux & MM_ENB) { if (m_map_mux & MM_INT) return map_r(0, offset); else return map_r(m_map_num, offset); } else // Theory: when mapper is deactivated, its outputs are all forced high, resulting // in set RESB|MEM|WP flags and resident bus address |= 0xf800. return m_eprom[0][0x1800 | (offset & 0x7ff)]; } void labtam_z80sbc_device::mem_w(offs_t offset, u8 data) { if (m_map_mux & MM_ENB) { if (m_map_mux & MM_INT) map_w(0, offset, data); else map_w(m_map_num, offset, data); } else LOG("mem_w unmapped offset 0x%04x data 0x%02x (%s)\n", offset, data, machine().describe_context()); } u8 labtam_z80sbc_device::map_r(unsigned map_num, offs_t offset) { u8 const entry = ((offset >> 8) & 0xf8) | (map_num & 0x07); u8 const lo = m_map_lo[entry]; u8 const hi = m_map_hi[entry]; u32 const address = u32(hi & MAPWR1_MA19) << 15 | u32(lo) << 11 | (offset & 0x7ff); if (hi & MAPWR1_RESB) { // TODO: use address space to decode resident bus switch (address & 0xf000) { case 0x2000: return m_sram[address & 0x7ff]; case 0x4000: case 0x5000: return m_eprom[1][address & 0x1fff]; case 0xe000: case 0xf000: return m_eprom[0][address & 0x1fff]; default: LOG("map_r hi 0x%02x lo 0x%02x address 0x%05x (%s)\n", hi, lo, address, machine().describe_context()); return 0; } } else return m_bus->space((hi & MAPWR1_MEM) ? AS_PROGRAM : AS_IO).read_byte(address); } void labtam_z80sbc_device::map_w(unsigned map_num, offs_t offset, u8 data) { u8 const entry = ((offset >> 8) & 0xf8) | (map_num & 0x07); u8 const lo = m_map_lo[entry]; u8 const hi = m_map_hi[entry]; u32 const address = u32(hi & MAPWR1_MA19) << 15 | u32(lo) << 11 | (offset & 0x7ff); if (!(hi & MAPWR1_WP)) { if (hi & MAPWR1_RESB) { // TODO: use address space to decode resident bus switch (address & 0xf000) { case 0x2000: m_sram[address & 0x7ff] = data; break; default: LOG("map_w hi 0x%02x lo 0x%02x address 0x%05x data 0x%02x (%s)\n", hi, lo, address, data, machine().describe_context()); break; } } else m_bus->space((hi & MAPWR1_MEM) ? AS_PROGRAM : AS_IO).write_byte(address, data); } } void labtam_z80sbc_device::intswt_w(u8 data) { /* * Writing to this port deactivates the interrupt map after the next three * Z80 memory read cycles. This delay supports interrupt return, allowing * the standard epilogue of NOP, EI, and RET to be fetched and executed * from map 0, before the return address is fetched from the non-interrupt * memory map. */ LOG("intswt map 0x%02x mux 0x%02x (%s)\n", m_map_num, m_map_mux, machine().describe_context()); m_map_mux |= MM_PND; m_map_cnt = 3; } void labtam_z80sbc_device::mapnum_w(u8 data) { LOG("mapnum 0x%02x (%s)\n", data, machine().describe_context()); m_map_mux |= MM_ENB; // TODO: what are bits 3, 4 and 5 used for? m_map_num = data & 0x07; } void labtam_z80sbc_device::fdcint_w(int state) { if (state) m_fdcstatus |= 1U << 0; else m_fdcstatus &= ~(1U << 0); m_uic->ireq2_w(state); int_w<3>(state); } void labtam_z80sbc_device::drive_w(offs_t offset, u8 data) { switch (offset) { case 0: case 1: case 2: case 3: if (BIT(data, 0)) { LOG("drive_w select drive %d (%s)\n", offset, machine().describe_context()); m_drive = offset; m_fdc->set_floppy(m_fdd[*m_drive]->get_device()); } else { m_drive.reset(); m_fdc->set_floppy(nullptr); } break; case 4: m_fdc->dden_w(BIT(data, 0)); break; case 5: // FIXME: make side select persistent if (m_drive) { LOG("drive_w select side %d (%s)\n", BIT(data, 0), machine().describe_context()); m_fdd[*m_drive]->get_device()->ss_w(BIT(data, 0)); } break; case 6: // TODO: precomp break; case 7: LOG("drive_w mini-floppy %s (%s)\n", BIT(data, 0) ? "disable" : "enable", machine().describe_context()); m_fdc->enmf_w(BIT(data, 0)); break; } } void labtam_z80sbc_device::fdcclr_w(u8 data) { m_uic->ireq4_w(0); } void labtam_z80sbc_device::netclr_w(u8 data) { LOG("netclr_w 0x%02x (%s)\n", data, machine().describe_context()); } void labtam_z80sbc_device::fdcattn_w(u8 data) { LOG("fdcattn_w 0x%02x (%s)\n", data, machine().describe_context()); m_uic->ireq4_w(1); } u8 labtam_z80sbc_device::fdcstatus_r() { LOG("fdcstatus_r (%s)\n", machine().describe_context()); return m_fdcstatus; } u8 labtam_z80sbc_device::drvstatus_r() { u8 data = m_e21->read(); if (m_drive) { floppy_image_device *fid = m_fdd[*m_drive]->get_device(); if (fid && !fid->twosid_r()) data |= DRVSTATUS_DS; } return data; }