// license:BSD-3-Clause // copyright-holders:AJR /*************************************************************************** Adaptec AHA-1740/44 and AHA-1740A/42A Fast SCSI host adapters These are actually EISA cards, though they also have a compatibility mode that provides an interface like the older ISA AHA-154X series. On the AHA-1740 and AHA-1744, the HPC microcode is stored in an EEPROM (of unknown type), allowing it to be reprogrammed by the host. This is not possible on the AHA-1740A and AHA-1744A, which use a conventional 27C256 EPROM for the microcode. In both cases the HPC copies the code to and then executes it out of RAM. Though the AHA-1740 and AHA-1740A have different board layouts, they share the following ICs: AIC-565 Bus Auxiliary Interface Chip AIC-575 EISA Configuration Chip AIC-4600 HPC (HPC46003V20) AIC-6251A SCSI Interface and Protocol Chip IDT7201 or QS7201 512x9 FIFO (2 on board) Intel 82355 Bus Master Interface Controller AHA-1742A is the same as AHA-1740A, only with the FDC populated. AHA-1744 uses the same layout as AHA-1740, but populates the area around the SCSI port with DS36F95J differential drivers. ***************************************************************************/ #include "emu.h" #include "aha174x.h" #include "bus/nscsi/devices.h" #include "machine/aic6250.h" #include "machine/i82355.h" #include "machine/nscsi_bus.h" DEFINE_DEVICE_TYPE(AHA1740, aha1740_device, "aha1740", "AHA-1740 Fast SCSI Host Adapter") DEFINE_DEVICE_TYPE(AHA1742A, aha1742a_device, "aha1742a", "AHA-1742A Fast SCSI Host Adapter") aha174x_device::aha174x_device(const machine_config &mconfig, device_type type, const char *tag, device_t *owner, u32 clock) : device_t(mconfig, type, tag, owner, clock) , device_isa16_card_interface(mconfig, *this) , m_hpc(*this, "hpc") , m_busaic(*this, "busaic") , m_fifo(*this, "fifo%u", 0U) , m_bios(*this, "bios") { } aha1740_device::aha1740_device(const machine_config &mconfig, const char *tag, device_t *owner, u32 clock) : aha174x_device(mconfig, AHA1740, tag, owner, clock) { } aha1742a_device::aha1742a_device(const machine_config &mconfig, const char *tag, device_t *owner, u32 clock) : aha174x_device(mconfig, AHA1742A, tag, owner, clock) , m_fdc(*this, "fdc") { } void aha174x_device::device_start() { } void aha174x_device::hpc_map(address_map &map) { map(0x2000, 0x2003).rw(m_busaic, FUNC(aic565_device::local_r), FUNC(aic565_device::local_w)); map(0x4000, 0x4002).rw("bmic", FUNC(i82355_device::local_r), FUNC(i82355_device::local_w)); map(0x5000, 0x500f).m("scsi:7:scsic", FUNC(aic6251a_device::map)); map(0x7000, 0x7000).w(m_fifo[0], FUNC(fifo7200_device::data_byte_w)); map(0x7001, 0x7001).w(m_fifo[1], FUNC(fifo7200_device::data_byte_w)); map(0x7002, 0x7002).r(m_fifo[0], FUNC(fifo7200_device::data_byte_r)); map(0x7003, 0x7003).r(m_fifo[1], FUNC(fifo7200_device::data_byte_r)); map(0x8000, 0xffff).rom().region("mcode", 0); } void aha174x_device::scsic_config(device_t *device) { device->set_clock(40_MHz_XTAL / 2); // divider not verified } void aha1740_device::device_add_mconfig(machine_config &config) { HPC46003(config, m_hpc, 40_MHz_XTAL / 2); m_hpc->set_addrmap(AS_PROGRAM, &aha1740_device::hpc_map); AIC565(config, m_busaic); m_busaic->hrst_callback().set_inputline(m_hpc, INPUT_LINE_RESET); //m_busaic->srst_callback().set_inputline(m_hpc, hpc_device::EI_LINE); I82355(config, "bmic", 0); //bmic.lint_callback().set_inputline(m_hpc, hpc_device::I2_LINE); IDT7201(config, m_fifo[0]); IDT7201(config, m_fifo[1]); NSCSI_BUS(config, "scsi"); NSCSI_CONNECTOR(config, "scsi:0", default_scsi_devices, nullptr); NSCSI_CONNECTOR(config, "scsi:1", default_scsi_devices, nullptr); NSCSI_CONNECTOR(config, "scsi:2", default_scsi_devices, nullptr); NSCSI_CONNECTOR(config, "scsi:3", default_scsi_devices, nullptr); NSCSI_CONNECTOR(config, "scsi:4", default_scsi_devices, nullptr); NSCSI_CONNECTOR(config, "scsi:5", default_scsi_devices, nullptr); NSCSI_CONNECTOR(config, "scsi:6", default_scsi_devices, nullptr); NSCSI_CONNECTOR(config, "scsi:7").option_set("scsic", AIC6251A) .machine_config([this] (device_t *device) { scsic_config(device); }); } void aha1742a_device::device_add_mconfig(machine_config &config) { HPC46003(config, m_hpc, 40_MHz_XTAL / 2); m_hpc->set_addrmap(AS_PROGRAM, &aha1742a_device::hpc_map); AIC565(config, m_busaic); m_busaic->hrst_callback().set_inputline(m_hpc, INPUT_LINE_RESET); //m_busaic->srst_callback().set_inputline(m_hpc, hpc_device::EI_LINE); I82355(config, "bmic", 0); //bmic.lint_callback().set_inputline(m_hpc, hpc_device::I2_LINE); IDT7201(config, m_fifo[0]); IDT7201(config, m_fifo[1]); NSCSI_BUS(config, "scsi"); NSCSI_CONNECTOR(config, "scsi:0", default_scsi_devices, nullptr); NSCSI_CONNECTOR(config, "scsi:1", default_scsi_devices, nullptr); NSCSI_CONNECTOR(config, "scsi:2", default_scsi_devices, nullptr); NSCSI_CONNECTOR(config, "scsi:3", default_scsi_devices, nullptr); NSCSI_CONNECTOR(config, "scsi:4", default_scsi_devices, nullptr); NSCSI_CONNECTOR(config, "scsi:5", default_scsi_devices, nullptr); NSCSI_CONNECTOR(config, "scsi:6", default_scsi_devices, nullptr); NSCSI_CONNECTOR(config, "scsi:7").option_set("scsic", AIC6251A) .machine_config([this] (device_t *device) { scsic_config(device); }); N82077AA(config, m_fdc, 24_MHz_XTAL); } ROM_START(aha1740) ROM_REGION(0x4000, "bios", 0) ROM_LOAD("b_dc00.bin", 0x0000, 0x4000, CRC(056d75ec) SHA1(8ca143adfc7d20ad5d49f14dedabc8276454bf9e)) ROM_REGION16_LE(0x8000, "mcode", 0) ROM_SYSTEM_BIOS(0, "v140st", "BIOS v1.40 (Standard Mode)") ROMX_LOAD("standard.bin", 0x0000, 0x8000, CRC(8c15c6a2) SHA1(77e15b0244e3a814f53f957270e6474a8a839955), ROM_BIOS(0)) ROM_SYSTEM_BIOS(1, "v140en", "BIOS v1.40 (Enhanced Mode)") ROMX_LOAD("enhanced.bin", 0x0000, 0x8000, CRC(84b3df89) SHA1(a718c3ea5443a609b4b20bfe48be18193737ad25), ROM_BIOS(1)) // Adaptec's help file claims that "the EEPROM on the board can hold firmware for both modes simultaneously." // The AHA-174XA firmware images obviously have this, but the files provided here do not agree. ROM_END ROM_START(aha1742a) ROM_REGION(0x4000, "bios", 0) ROM_DEFAULT_BIOS("v140") ROM_SYSTEM_BIOS(0, "v134", "BIOS v1.34") ROMX_LOAD("adaptec_inc_450214-00_a_bios_8800_1991.u47", 0x0000, 0x4000, CRC(6cf06151) SHA1(0da45634b12b33fc886920d065cc8ffb2cf376b8), ROM_BIOS(0)) ROM_SYSTEM_BIOS(1, "v140", "BIOS v1.40") ROMX_LOAD("adaptec_inc_450216-00_a_bios_dc00_1992.u47", 0x0000, 0x4000, CRC(056d75ec) SHA1(8ca143adfc7d20ad5d49f14dedabc8276454bf9e), ROM_BIOS(1)) ROM_SYSTEM_BIOS(2, "v140s", "BIOS v1.40 (Extended Timeout)") ROMX_LOAD("b_f100.bin", 0x0000, 0x4000, CRC(b695acc0) SHA1(683112fafdf83d5eb89237d9215f7d6eacc6eeaf), ROM_BIOS(2)) ROM_REGION16_LE(0x8000, "mcode", 0) ROMX_LOAD("adaptec_inc_450117-00_c_mcode_23a8_1991.u10", 0x0000, 0x8000, NO_DUMP, ROM_BIOS(0)) ROMX_LOAD("adaptec_inc_450113-00_d_mcode_b7d6_1992.u10", 0x0000, 0x8000, CRC(0a55a555) SHA1(ff400f56b33f0ad94e34564d7715a0773b335844), ROM_BIOS(1)) ROMX_LOAD("m_c7b8.bin", 0x0000, 0x8000, CRC(21282e86) SHA1(18cb3960dc47f2c14beb88f9680c1f66c4652b04), ROM_BIOS(2)) ROM_END const tiny_rom_entry *aha1740_device::device_rom_region() const { return ROM_NAME(aha1740); } const tiny_rom_entry *aha1742a_device::device_rom_region() const { return ROM_NAME(aha1742a); }