// BSD 3-Clause License // // Copyright (c) 2021, Aaron Giles // All rights reserved. // // Redistribution and use in source and binary forms, with or without // modification, are permitted provided that the following conditions are met: // // 1. Redistributions of source code must retain the above copyright notice, this // list of conditions and the following disclaimer. // // 2. Redistributions in binary form must reproduce the above copyright notice, // this list of conditions and the following disclaimer in the documentation // and/or other materials provided with the distribution. // // 3. Neither the name of the copyright holder nor the names of its // contributors may be used to endorse or promote products derived from // this software without specific prior written permission. // // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" // AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE // IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE // DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE // FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL // DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR // SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER // CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, // OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE // OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. #ifndef YMFM_OPQ_H #define YMFM_OPQ_H #pragma once #include "ymfm.h" #include "ymfm_fm.h" namespace ymfm { //********************************************************* // REGISTER CLASSES //********************************************************* // ======================> opq_registers // // OPQ register map: // // System-wide registers: // 03 xxxxxxxx Timer control (unknown; 0x71 causes interrupts at ~10ms) // 04 ----x--- LFO disable // -----xxx LFO frequency (0=~4Hz, 6=~10Hz, 7=~47Hz) // 05 -x------ Key on/off operator 4 // --x----- Key on/off operator 3 // ---x---- Key on/off operator 2 // ----x--- Key on/off operator 1 // -----xxx Channel select // // Per-channel registers (channel in address bits 0-2) // 10-17 x------- Pan right // -x------ Pan left // --xxx--- Feedback level for operator 1 (0-7) // -----xxx Operator connection algorithm (0-7) // 18-1F x------- Reverb // -xxx---- PM sensitivity // ------xx AM shift // 20-27 -xxx---- Block (0-7), Operator 2 & 4 // ----xxxx Frequency number upper 4 bits, Operator 2 & 4 // 28-2F -xxx---- Block (0-7), Operator 1 & 3 // ----xxxx Frequency number upper 4 bits, Operator 1 & 3 // 30-37 xxxxxxxx Frequency number lower 8 bits, Operator 2 & 4 // 38-3F xxxxxxxx Frequency number lower 8 bits, Operator 1 & 3 // // Per-operator registers (channel in address bits 0-2, operator in bits 3-4) // 40-5F 0-xxxxxx Detune value (0-63) // 1---xxxx Multiple value (0-15) // 60-7F -xxxxxxx Total level (0-127) // 80-9F xx------ Key scale rate (0-3) // ---xxxxx Attack rate (0-31) // A0-BF x------- LFO AM enable, retrigger disable // x------ Waveform select // ---xxxxx Decay rate (0-31) // C0-DF ---xxxxx Sustain rate (0-31) // E0-FF xxxx---- Sustain level (0-15) // ----xxxx Release rate (0-15) // // Diffs from OPM: // - 2 frequencies/channel // - retrigger disable // - 2 waveforms // - uses FNUM // - reverb behavior // - larger detune range // // Questions: // - timer information is pretty light // - how does echo work? // - class opq_registers : public fm_registers_base { public: // constants static constexpr uint32_t OUTPUTS = 2; static constexpr uint32_t CHANNELS = 8; static constexpr uint32_t ALL_CHANNELS = (1 << CHANNELS) - 1; static constexpr uint32_t OPERATORS = CHANNELS * 4; static constexpr uint32_t WAVEFORMS = 2; static constexpr uint32_t REGISTERS = 0x120; static constexpr uint32_t REG_MODE = 0x03; static constexpr uint32_t DEFAULT_PRESCALE = 2; static constexpr uint32_t EG_CLOCK_DIVIDER = 3; static constexpr bool EG_HAS_REVERB = true; static constexpr bool MODULATOR_DELAY = false; static constexpr uint32_t CSM_TRIGGER_MASK = ALL_CHANNELS; static constexpr uint8_t STATUS_TIMERA = 0; static constexpr uint8_t STATUS_TIMERB = 0x04; static constexpr uint8_t STATUS_BUSY = 0x80; static constexpr uint8_t STATUS_IRQ = 0; // constructor opq_registers(); // reset to initial state void reset(); // save/restore void save_restore(ymfm_saved_state &state); // map channel number to register offset static constexpr uint32_t channel_offset(uint32_t chnum) { assert(chnum < CHANNELS); return chnum; } // map operator number to register offset static constexpr uint32_t operator_offset(uint32_t opnum) { assert(opnum < OPERATORS); return opnum; } // return an array of operator indices for each channel struct operator_mapping { uint32_t chan[CHANNELS]; }; void operator_map(operator_mapping &dest) const; // handle writes to the register array bool write(uint16_t index, uint8_t data, uint32_t &chan, uint32_t &opmask); // clock the noise and LFO, if present, returning LFO PM value int32_t clock_noise_and_lfo(); // reset the LFO void reset_lfo() { m_lfo_counter = 0; } // return the AM offset from LFO for the given channel uint32_t lfo_am_offset(uint32_t choffs) const; // return the current noise state, gated by the noise clock uint32_t noise_state() const { return 0; } // caching helpers void cache_operator_data(uint32_t choffs, uint32_t opoffs, opdata_cache &cache); // compute the phase step, given a PM value uint32_t compute_phase_step(uint32_t choffs, uint32_t opoffs, opdata_cache const &cache, int32_t lfo_raw_pm); // log a key-on event std::string log_keyon(uint32_t choffs, uint32_t opoffs); // system-wide registers uint32_t timer_a_value() const { return 0; } uint32_t timer_b_value() const { return byte(0x03, 2, 6) | 0xc0; } // ??? uint32_t csm() const { return 0; } uint32_t reset_timer_b() const { return byte(0x03, 0, 1); } // ??? uint32_t reset_timer_a() const { return 0; } uint32_t enable_timer_b() const { return byte(0x03, 0, 1); } // ??? uint32_t enable_timer_a() const { return 0; } uint32_t load_timer_b() const { return byte(0x03, 0, 1); } // ??? uint32_t load_timer_a() const { return 0; } uint32_t lfo_enable() const { return byte(0x04, 3, 1) ^ 1; } uint32_t lfo_rate() const { return byte(0x04, 0, 3); } // per-channel registers uint32_t ch_output_any(uint32_t choffs) const { return byte(0x10, 6, 2, choffs); } uint32_t ch_output_0(uint32_t choffs) const { return byte(0x10, 6, 1, choffs); } uint32_t ch_output_1(uint32_t choffs) const { return byte(0x10, 7, 1, choffs); } uint32_t ch_output_2(uint32_t choffs) const { return 0; } uint32_t ch_output_3(uint32_t choffs) const { return 0; } uint32_t ch_feedback(uint32_t choffs) const { return byte(0x10, 3, 3, choffs); } uint32_t ch_algorithm(uint32_t choffs) const { return byte(0x10, 0, 3, choffs); } uint32_t ch_reverb(uint32_t choffs) const { return byte(0x18, 7, 1, choffs); } uint32_t ch_lfo_pm_sens(uint32_t choffs) const { return byte(0x18, 4, 3, choffs); } uint32_t ch_lfo_am_sens(uint32_t choffs) const { return byte(0x18, 0, 2, choffs); } uint32_t ch_block_freq_24(uint32_t choffs) const { return word(0x20, 0, 7, 0x30, 0, 8, choffs); } uint32_t ch_block_freq_13(uint32_t choffs) const { return word(0x28, 0, 7, 0x38, 0, 8, choffs); } // per-operator registers uint32_t op_detune(uint32_t opoffs) const { return byte(0x40, 0, 6, opoffs); } uint32_t op_multiple(uint32_t opoffs) const { return byte(0x100, 0, 4, opoffs); } uint32_t op_total_level(uint32_t opoffs) const { return byte(0x60, 0, 7, opoffs); } uint32_t op_ksr(uint32_t opoffs) const { return byte(0x80, 6, 2, opoffs); } uint32_t op_attack_rate(uint32_t opoffs) const { return byte(0x80, 0, 5, opoffs); } uint32_t op_lfo_am_enable(uint32_t opoffs) const { return byte(0xa0, 7, 1, opoffs); } uint32_t op_waveform(uint32_t opoffs) const { return byte(0xa0, 6, 1, opoffs); } uint32_t op_decay_rate(uint32_t opoffs) const { return byte(0xa0, 0, 5, opoffs); } uint32_t op_sustain_rate(uint32_t opoffs) const { return byte(0xc0, 0, 5, opoffs); } uint32_t op_sustain_level(uint32_t opoffs) const { return byte(0xe0, 4, 4, opoffs); } uint32_t op_release_rate(uint32_t opoffs) const { return byte(0xe0, 0, 4, opoffs); } protected: // return a bitfield extracted from a byte uint32_t byte(uint32_t offset, uint32_t start, uint32_t count, uint32_t extra_offset = 0) const { return bitfield(m_regdata[offset + extra_offset], start, count); } // return a bitfield extracted from a pair of bytes, MSBs listed first uint32_t word(uint32_t offset1, uint32_t start1, uint32_t count1, uint32_t offset2, uint32_t start2, uint32_t count2, uint32_t extra_offset = 0) const { return (byte(offset1, start1, count1, extra_offset) << count2) | byte(offset2, start2, count2, extra_offset); } // internal state uint32_t m_lfo_counter; // LFO counter uint8_t m_lfo_am; // current LFO AM value uint8_t m_regdata[REGISTERS]; // register data uint16_t m_waveform[WAVEFORMS][WAVEFORM_LENGTH]; // waveforms }; //********************************************************* // IMPLEMENTATION CLASSES //********************************************************* // ======================> ym3806 class ym3806 { public: using fm_engine = fm_engine_base; static constexpr uint32_t OUTPUTS = fm_engine::OUTPUTS; using output_data = fm_engine::output_data; // constructor ym3806(ymfm_interface &intf); // reset void reset(); // save/restore void save_restore(ymfm_saved_state &state); // pass-through helpers uint32_t sample_rate(uint32_t input_clock) const { return m_fm.sample_rate(input_clock); } void invalidate_caches() { m_fm.invalidate_caches(); } // read access uint8_t read_status(); uint8_t read(uint32_t offset); // write access void write_address(uint8_t data) { /* not supported; only direct writes */ } void write_data(uint8_t data) { /* not supported; only direct writes */ } void write(uint32_t offset, uint8_t data); // generate one sample of sound void generate(output_data *output, uint32_t numsamples = 1); protected: // internal state fm_engine m_fm; // core FM engine }; // ======================> ym3533 class ym3533 : public ym3806 { public: // constructor ym3533(ymfm_interface &intf) : ym3806(intf) { } }; } #endif // YMFM_OPQ_H