arcade hardware http://git.redump.net/hbmame/atom/src/mame/drivers/mekd1.cpp?h=master 2022-06-04T07:14:21Z - Removed device_timer, device_timer_id, et al in favor of direct callback members. (#9788) 2022-06-04T07:14:21Z MooglyGuy MooglyGuy@users.noreply.github.com 2022-06-04T07:14:21Z urn:sha1:1bc5484698bb746c6f9f7dae58b005d2472f1215 Primarily, this removes device_t::device_timer, device_t::timer_set, device_t::synchronize, device_t::timer_expired, and device_timer_id. Use of device_timer often resulted in unnecessary trampolining in addition to switch/case overhead on a driver/device level, and additional logic to manage delegated vs. ID-based timers on a core level. In the worst cases, devices were performing a switch/case with only one valid case. device_scheduler::timer_set is marked deprecated as the only remaining direct uses are via the Lua engine and a few drivers that need refactoring anyway. The remaining uses occur via device_scheduler::synchronize. As a middle ground between the extremely short timer_alloc() and the extremely long machine().scheduler().timer_alloc(timer_expired_delegate(FUNC(widget_device::contoso_tick), this)), a helper function in device_t has been added which can be invoked with the following syntax: timer_alloc(FUNC(widget_device::contoso_tick), this) - Additional changes/cleanups performed along the way: - Converted to use logmacro: * src/devices/bus/ieee488/hp9895.cpp * src/devices/bus/ieee488/remote488.cpp * src/devices/bus/isa/hdc.cpp * src/devices/bus/isa/omti8621.cpp * src/devices/bus/isa/sc499.cpp * src/devices/bus/vip/vp550.cpp * src/devices/cpu/i86/i186.cpp * src/devices/cpu/lc8670/lc8670.cpp * src/devices/machine/68230pit.cpp * src/devices/machine/corvushd.cpp * src/devices/machine/ds1994.cpp * src/devices/machine/ticket.cpp * src/mame/audio/pinsnd88.cpp * src/mame/drivers/notetaker.cpp * src/mame/machine/asic65.cpp * src/mame/machine/rmnimbus.cpp * src/mame/machine/victor9k_fdc.cpp * src/mame/video/uv201.cpp - Made usage of m_member prefix consistent: * src/devices/bus/isa/hdc.cpp * src/devices/bus/isa/omti8621.cpp * src/devices/bus/vme/vme_fccpu20.cpp * src/devices/machine/ds1386.cpp * src/devices/machine/i7220.cpp - Spacing consistency pass: * src/devices/bus/isa/hdc.cpp * src/devices/bus/isa/omti8621.cpp * src/devices/bus/thomson/nanoresau.cpp * src/devices/bus/ti99/internal/992board.cpp * src/devices/bus/ti99/internal/genkbd.cpp * src/devices/bus/ti99/internal/joyport/handset.cpp * src/devices/bus/vme/vme_fccpu20.cpp * src/devices/cpu/i86/i186.cpp * src/devices/cpu/lc8670/lc8670.cpp * src/devices/machine/68230pit.cpp * src/devices/machine/cop452.cpp * src/devices/machine/corvushd.cpp * src/devices/machine/hp_dc100_tape.cpp * src/devices/machine/hp_taco.cpp * src/devices/machine/meters.cpp * src/devices/machine/microtch.cpp * src/devices/machine/phi.cpp * src/devices/video/ef9365.cpp * src/devices/video/v9938.cpp * src/mame/drivers/alphaskop41xx.cpp * src/mame/drivers/myb3k.cpp * src/mame/drivers/notetaker.cpp * src/mame/drivers/wpc_an.cpp * src/mame/machine/midikbd.cpp * src/mame/machine/rmnimbus.cpp * src/mame/machine/wpc_lamp.cpp * src/mame/machine/wpc_out.cpp - Removed string-based ioport lookups: * src/devices/bus/ti99/internal/joyport/handset.cpp * src/devices/bus/ti99/internal/joyport/mecmouse.cpp * src/devices/bus/vme/vme_hcpu30.cpp * src/mame/machine/k7659kb.cpp * src/mame/machine/ti85.cpp - Adjustments to grammar/wording in comments * src/devices/bus/sms_ctrl/lphaser.cpp * src/devices/bus/sms_ctrl/sports.cpp * src/devices/bus/snes/event.cpp * src/devices/bus/snes/sa1.cpp * src/devices/bus/thomson/nanoresau.cpp * src/devices/bus/z88/z88.cpp * src/devices/machine/ds1386.cpp * src/devices/machine/vic_pl192.cpp - Favored BIT() macro for single-bit checks * src/devices/bus/ti99/internal/992board.cpp * src/devices/bus/ti99/joyport/handset.cpp * src/mame/drivers/notetaker.cpp * src/mame/machine/wpc_lamp.cpp * src/mame/machine/wpc_out.cpp - Removed C89-style variable declarations when noticed * src/devices/bus/isa/hdc.cpp * src/devices/bus/sms_ctrl/lphaser.cpp * src/devices/bus/ti99/joyport/mecmouse.cpp * src/devices/machine/acorn_vidc.cpp * src/devices/sound/ymz280b.cpp * src/devices/video/vic4567.cpp - Removed FUNCNAME to avoid compiler-specific #define checks in devices * src/devices/bus/vme/vme_fccpu20.cpp * src/devices/bus/vme/vme_hcpu30.cpp * src/devices/machine/68230pit.cpp * src/devices/machine/mc14411.cpp * src/mame/drivers/myb3k.cpp - Removed unecessary member prefixes/suffixes * src/devices/video/ef9340_1.cpp * src/mame/drivers/fuukifg2.cpp * src/mame/drivers/fuukifg3.cpp * src/mame/drivers/intv.cpp * src/mame/drivers/simpsons.cpp * src/mame/drivers/socrates.cpp * src/mame/drivers/special_gambl.cpp * src/mame/drivers/sprint4.cpp * src/mame/drivers/ti990_10.cpp * src/mame/drivers/tubep.cpp * src/mame/drivers/vectrex.cpp * src/mame/drivers/wpc_an.cpp * src/mame/drivers/wpc_dot.cpp * src/mame/drivers/wpc_flip1.cpp * src/mame/drivers/wpc_flip2.cpp * src/mame/machine/z80ne.cpp * src/mame/video/rollerg.cpp - Switched to lower-case hex constants * src/devices/video/ef9365.cpp * src/mame/machine/rmnimbus.cpp - Re-ordered driver overrides and function members * src/mame/drivers/boxer.cpp * src/mame/drivers/eurocom2.cpp * src/mame/drivers/exidy.cpp * src/mame/drivers/gpworld.cpp * src/mame/drivers/h19.cpp * src/mame/drivers/ibmpcjr.cpp * src/mame/drivers/mekd5.cpp * src/mame/drivers/mgolf.cpp * src/mame/drivers/myb3k.cpp * src/mame/drivers/nightmare.cpp * src/mame/drivers/notetaker.cpp * src/mame/drivers/ptcsol.cpp * src/mame/drivers/pwrview.cpp * src/mame/drivers/rabbit.cpp * src/mame/drivers/sitcom.cpp * src/mame/drivers/socrates.cpp * src/mame/drivers/sprint4.cpp * src/mame/drivers/techno.cpp * src/mame/drivers/thayers.cpp * src/mame/drivers/ti990_10.cpp * src/mame/drivers/ti990_4.cpp * src/mame/drivers/tv912.cpp * src/mame/drivers/tv990.cpp * src/mame/drivers/uchroma68.cpp * src/mame/drivers/vk100.cpp * src/mame/drivers/votrhv.cpp * src/mame/drivers/wicat.cpp * src/mame/drivers/wpc_an.cpp * src/mame/includes/abc80.h * src/mame/includes/asterix.h * src/mame/includes/fuukifg2.h * src/mame/includes/fuukifg3.h * src/mame/includes/gunbustr.h * src/mame/includes/intv.h * src/mame/includes/namcona1.h * src/mame/includes/newbrain.h * src/mame/includes/poly.h * src/mame/includes/prof80.h * src/mame/includes/rollerg.h * src/mame/includes/s11.h * src/mame/includes/segahang.h * src/mame/includes/simpsons.h * src/mame/includes/spacefb.h * src/mame/includes/tandy2k.h * src/mame/includes/trucocl.h * src/mame/includes/tubebp.h * src/mame/includes/vidbrain.h * src/mame/includes/wolfpack.h * src/mame/includes/wpc_dot.h - Made capitalization consistent on class members * src/devices/machine/meters.cpp * src/mame/drivers/namcona1.cpp * src/mame/drivers/notetaker.cpp -src/devices/bus/isa/hdc.cpp: * Removed fixed-size std::vector in favor of std::unique_ptr -src/devices/bus/isa/s3virge.cpp: * Moved unusually large (for a header) functions into .cpp from header -src/devices/bus/vip/vp550.cpp * Switched to required_device_array to simplify code paths -src/devices/machine/arm_iomd.cpp * Added initializers to constructor * Favored std::size over fixed static sizes -src/devices/machine/ds1386.cpp * Moved register #defines into header enums -src/devices/machine/mc68901.cpp * Removed unnecessary parameters and emu_timer::enable calls -src/devices/machine/mccs1850.cpp * Removed inline overuse -src/devices/machine/meters.cpp * Removed unused members -src/devices/machine/mos6526.cpp * Removed inline overuse -src/devices/machine/nsc810.cpp * Converted to arrays rather than individually-numbered members -src/devices/machine/pxa255.cpp * Simplified DMA transfer code -src/devices/machine/saa1043.cpp * Removed extraneous members in favor of resolve_all_safe -src/devices/machine/vic_pl192.cpp * Shifted constructors, start-up, and maps to be at the top of the source file -src/devices/machine/z8536.cpp * Removed stray uses of device_timer_id -src/devices/sound/cdp1869.cpp * Removed inline overuse -src/devices/sound/mos7360.cpp * Converted to arrays rather than individually-numbered members -src/emu/device.cpp * Removed ID-based timer_alloc * Removed timer_set * Removed synchronize * Removed timer_expired * Added shorthand timer_alloc to avoid lengthy machine().scheduler().timer_alloc() calls -src/emu/schedule.cpp * Removed now-unused m_id and m_device members -src/mame/audio/alesis.cpp * Added initializers to constructor -src/mame/drivers/alto2.cpp * Removed custom-named driver init in favor of driver_init override * Removed octal constant in favor of more standard hex -src/mame/drivers/astinvad.cpp * Fixed 'kamizake' typo -src/mame/drivers/tm990189.cpp * Removed unnecessary machine reset override -src/mame/drivers/unichamp.cpp * Removed custom-named driver init in favor of driver_init override -src/mame/drivers/votrhv.cpp * Fixed ROM_LOAD macros and region() usage in memory maps -src/mame/machine/victor9k_fdc.cpp * Made bracing style consistent across the file -src/mame/video/gime.cpp * Removed unnecessary void specifiers in function prototypes Remove void *ptr parameter from emu_timer, timer_device and all related callbacks 2022-01-26T13:56:03Z AJR ajrhacker@users.noreply.github.com 2022-01-26T13:47:06Z urn:sha1:ca79d71af4bca7c1b8acc1df9e5dbb5b987d1542 rs232: HLE updates 2021-01-26T19:48:07Z AJR ajrhacker@users.noreply.github.com 2021-01-26T19:48:07Z urn:sha1:a7e6ae77d2b8116d3d5f768534e5421411764784 - Remove option to change the number of start bits (1 was always the default, and the RS232 protocol requires one start bit) - Add many historically significant baud rates ranging from 50 to 7200 * ccs2810.cpp, sb8085.cpp: Update notes a little more macro removal (nw) 2020-05-18T17:29:39Z Ivan Vangelista mesgnet@yahoo.it 2020-05-18T17:29:39Z urn:sha1:07a0b64f7a6cb05b2224876fabdd074e1993894b meks: save state, port change, rs232 ctrl lines, cleanup 2019-11-08T02:33:24Z 68bit info@68bit.org 2019-11-08T00:42:00Z urn:sha1:143385e2f2b44ae4904f55bd30803c1f739bb503 MEK6800D1: early Motorola 6800 design evaluation board 2019-10-07T16:47:02Z 68bit info@68bit.org 2019-10-06T09:27:09Z urn:sha1:92d7227ec0cde61a7283d8b303035e10ca502bab The MIKBUG monitor is working. The terminal support for reading and 'punching' tapes is not yet implemented.