summaryrefslogtreecommitdiffstatshomepage
path: root/src/emu/cpu/sc61860
Commit message (Collapse)AuthorAgeFilesLines
* Since nobody checks for NULLs anyway, make Aaron Giles2012-09-191-1/+1
| | | | | | | | | | | | device_memory_interface::space() assert against NULL and return a reference, and pushed references throughout all address space usage in the system. Added a has_space() method to check for those rare case when it is ambiguous. [Aaron Giles] Also reinstated the generic space and added fatal error handlers if anyone tries to actually read/write from it.
* Clean-ups and version bumpmame0147 Miodrag Milanovic2012-09-171-1/+1
| | | note: hoarded dump removed too from coco_cart.xml, this will not be tolerated
* Enum and union normalization. Aaron Giles2012-09-161-2/+2
|
* First pass at modernizing struct definitions. Aaron Giles2012-09-152-4/+2
|
* DEVINFO_* to CPU_INFO_*, and some cleanups (no whatsnew) Miodrag Milanovic2012-09-031-15/+15
|
* "English doesn't borrow from other languages. English follows other ↵ Scott Stone2011-08-232-4/+4
| | | | | | languages down dark alleys, knocks them over and goes through their pockets for loose grammar!" Hand-checked the most popular English word misspellings and made the appropriate changes. Nearly all of the changes made were in commented areas. (no whatsnew)
* Collapsed device_config and device_t into one class. Updated all Aaron Giles2011-04-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | existing modern devices and the legacy wrappers to work in this environment. This in general greatly simplifies writing a modern device. [Aaron Giles] General notes: * some more cleanup probably needs to happen behind this change, but I needed to get it in before the next device modernization or import from MESS :) * new template function device_creator which automatically defines the static function that creates the device; use this instead of creating a static_alloc_device_config function * added device_stop() method which is called at around the time the previous device_t's destructor was called; if you auto_free anything, do it here because the machine is gone when the destructor is called * changed the static_set_* calls to pass a device_t & instead of a device_config * * for many devices, the static config structure member names over- lapped the device's names for devcb_* functions; in these cases the members in the interface were renamed to have a _cb suffix * changed the driver_enumerator to only cache 100 machine_configs because caching them all took a ton of memory; fortunately this implementation detail is completely hidden behind the driver_enumerator interface * got rid of the macros for creating derived classes; doing it manually is now clean enough that it isn't worth hiding the details in a macro
* sc61860 cpu - fix for crash and cleanup, replace for internal ram Miodrag Milanovic2011-04-073-247/+296
| | | | accesses with function calls to help further debug the core in the future [Atari Ace]
* BIG update. Aaron Giles2011-03-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove redundant machine items from address_space and device_t. Neither machine nor m_machine are directly accessible anymore. Instead a new getter machine() is available which returns a machine reference. So: space->machine->xxx ==> space->machine().xxx device->machine->yyy ==> device->machine().yyy Globally changed all running_machine pointers to running_machine references. Any function/method that takes a running_machine takes it as a required parameter (1 or 2 exceptions). Being consistent here gets rid of a lot of odd &machine or *machine, but it does mean a very large bulk change across the project. Structs which have a running_machine * now have that variable renamed to m_machine, and now have a shiny new machine() method that works like the space and device methods above. Since most of these are things that should eventually be devices anyway, consider this a step in that direction. 98% of the update was done with regex searches. The changes are architected such that the compiler will catch the remaining errors: // find things that use an embedded machine directly and replace // with a machine() getter call S: ->machine-> R: ->machine\(\)\. // do the same if via a reference S: \.machine-> R: \.machine\(\)\. // convert function parameters to running_machine & S: running_machine \*machine([^;]) R: running_machine \&machine\1 // replace machine-> with machine. S: machine-> R: machine\. // replace &machine() with machine() S: \&([()->a-z0-9_]+machine\(\)) R: \1 // sanity check: look for this used as a cast (running_machine &) // and change to this: *(running_machine *)
* Created new enum type address_spacenum for specifying an address Aaron Giles2011-03-271-9/+9
| | | | | | | | | | | | space by index. Update functions and methods that accepted an address space index to take an address_spacenum instead. Note that this means you can't use a raw integer in ADDRESS_SPACE macros, so instead of 0 use the enumerated AS_0. Standardized the project on the shortened constants AS_* over the older ADDRESS_SPACE_*. Removed the latter to prevent confusion. Also centralized the location of these definitions to memory.h.
* Convert emu_timers to objects. Move implementation and management of Aaron Giles2011-02-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | timers into the scheduler. Retain TIMER devices as a separate wrapper in timer.c/.h. Inline wrappers are currently provided for all timer operations; a future update will bulk clean these up. Rather than using macros which hide generation of a string-ified name for callback functions, the new methods require passing both a function pointer plus a name string. A new macro FUNC() can be used to output both, and another macro MFUNC() can be used to output a stub-wrapped class member as a callback. Also added a time() method on the machine, so that machine->time() gives the current emulated time. A wrapper for timer_get_time is currently provided but will be bulk replaced in the future. For this update, convert all classic timer_alloc, timer_set, timer_pulse, and timer_call_after_resynch calls into method calls on the scheduler. For new device timers, added methods to the device_t class that make creating and managing these much simpler. Modern devices were updated to use these. Here are the regexes used; some manual cleanup (compiler-caught) will be needed since regex doesn't handle nested parentheses cleanly 1. Convert timer_call_after_resynch calls timer_call_after_resynch( *)\(( *)([^,;]+), *([^,;]+), *([^,;]+), *([^);]+)\) \3->scheduler().synchronize\1\(\2FUNC(\6), \5, \4\) 2. Clean up trailing 0, NULL parameters (synchronize[^;]+), 0, NULL\) \1) 3. Clean up trailing NULL parameters (synchronize[^;]+), NULL\) \1) 4. Clean up completely empty parameter lists synchronize\(FUNC\(NULL\)\) synchronize() 5. Convert timer_set calls timer_set( *)\(( *)([^,;]+), *([^,;]+), *([^,;]+), *([^,;]+), *([^);]+)\) \3->scheduler().timer_set\1\(\2\4, FUNC(\7), \6, \5\) 6. Clean up trailing 0, NULL parameters (timer_set[^;]+), 0, NULL\) \1) 7. Clean up trailing NULL parameters (timer_set[^;]+), NULL\) \1) 8. Convert timer_set calls timer_pulse( *)\(( *)([^,;]+), *([^,;]+), *([^,;]+), *([^,;]+), *([^);]+)\) \3->scheduler().timer_pulse\1\(\2\4, FUNC(\7), \6, \5\) 9. Clean up trailing 0, NULL parameters (timer_pulse[^;]+), 0, NULL\) \1) 10. Clean up trailing NULL parameters (timer_pulse[^;]+), NULL\) \1) 11. Convert timer_alloc calls timer_alloc( *)\(( *)([^,;]+), *([^,;]+), *([^);]+)\) \3->scheduler().timer_alloc\1\(\2FUNC(\4), \5\) 12. Clean up trailing NULL parameters (timer_alloc[^;]+), NULL\) \1) 13. Clean up trailing 0 parameters (timer_alloc[^;]+), 0\) \1) 14. Fix oddities introduced \&m_machine->scheduler() m_machine.scheduler()
* Attotime bulk conversion step: Aaron Giles2011-02-031-1/+1
| | | | | | | | | | | | | | | | | | attotime_zero => attotime::zero attotime_never => attotime::never ATTOTIME_IN_SEC(s) => attotime::from_seconds(s) ATTOTIME_IN_MSEC(m) => attotime::from_msec(m) ATTOTIME_IN_USEC(u) => attotime::from_usec(u) ATTOTIME_IN_NSEC(n) => attotime::from_nsec(n) ATTOTIME_IN_HZ(h) => attotime::from_hz(h) Also, changed the following MCFG macros to require a full attotime specification: MCFG_TIMER_ADD_PERIODIC MCFG_QUANTUM_TIME MCFG_WATCHDOG_TIME_INIT
* running_device -> device_t Aaron Giles2010-12-312-11/+11
| | | | | They both already existed. No sense in having two names for the same object type.
* Remove final set of legacy inlines from memory.h. Mostly affects CPU Aaron Giles2010-08-192-4/+6
| | | | | cores, which all now cache a copy of space->direct() and use it for direct accesses.
* Remove memory_read/write_byte/word/dword/qword* variants. Again, this is mostly Aaron Giles2010-08-191-2/+2
| | | | | | | | | | | | | | | | | | bulk search & replace: S: memory_read_([bytewordq]+)_[0-9lbe_maskd]+( *)\(( *)([^,]+)( *),( *) R: \4->read_\1\2\(\3 S: memory_read_([bytewordq]+)( *)\(( *)([^,]+)( *),( *) R: \4->read_\1\2\(\3 S: memory_write_([bytewordq]+)_[0-9lbe_maskd]+( *)\(( *)([^,]+)( *),( *) R: \4->write_\1\2\(\3 S: memory_write_([bytewordq]+)( *)\(( *)([^,]+)( *),( *) R: \4->write_\1\2\(\3 Gets 99% of the cases.
* Replace "const address_space" with "address_space" throughout the system. Aaron Giles2010-08-191-1/+1
| | | | | | | | | | | The purpose of making it const before was to discourage direct tampering, but private/protected does a better job of that now anyhow, and it is annoying now. s/const[ \t]+address_space\b/address_space/g; Is basically what I did.
* Created CPU-specific device types for all CPUs, using new macros Aaron Giles2010-07-032-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | DECLARE_LEGACY_CPU_DEVICE and DEFINE_LEGACY_CPU_DEVICE. Changed CPUs to be their own device types, rather than all of type CPU with a special internal subtype. Note that as part of this process I removed the CPU_ prefix from the ALL-CAPS device name, so CPU_Z80 is just plain old Z80 now. This required changing a couple of names like 8080 to I8080 so that there was an alphabetic first character. Added memory interfaces to the list of fast-access interfaces. To do this properly I had to add a separate method to devices which is called immediately after construction, when it is possible to perform dynamic_casts on fully-constructed objects. (This is just internal, no changes necessary to the devices themselves.) Some additional notes: * SH2 and SH4 had typedefs that conflicted with their CPU_-less names so I bulk renamed to structures to sh2_state and sh4_state; RB, feel free to choose alternate names if you don't like 'em * SCSP was caught doing something to the 3rd indexed CPU. Since several systems that use SCSP don't even have 3 CPUs, I had no idea what this was supposed to do, so I changed to it reference "audiocpu" assuming that stv was the assumed target. This is really gross and should be a configuration parameter, not a hard-coded assumption.
* Change cpu_device into a base class. Rename old cpu_device to legacy_cpu_device. Aaron Giles2010-06-171-2/+2
| | | | Update interfaces as appropriate.
* Change cpu execute function to just use the icount stuffed by Aaron Giles2010-06-091-4/+0
| | | | | the scheduler, rather than manging an incoming cycle count. It was confusing to have multiple sources of cycle counts.
* Changed CPU callbacks to use cpu_device, eliminating a bunch of casting. Aaron Giles2010-06-081-3/+3
|
* WARNING: There are likely to be regressions in both functionality and Aaron Giles2010-06-081-6/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | performance as a result of this change. Do not panic; report issues to the list in the short term and I will look into them. There are probably also some details I forgot to mention. Please ask questions if anything is not clear. NOTE: This is a major internal change to the way devices are handled in MAME. There is a small impact on drivers, but the bulk of the changes are to the devices themselves. Full documentation on the new device handling is in progress at http://mamedev.org/devwiki/index.php/MAME_Device_Basics Defined two new casting helpers: [Aaron Giles] downcast<type>(value) should be used for safe and efficient downcasting from a base class to a derived class. It wraps static_cast<> by adding an assert that a matching dynamic_cast<> returns the same result in debug builds. crosscast<type>(value) should be used for safe casting from one type to another in multiple inheritance scenarios. It compiles to a dynamic_cast<> plus an assert on the result. Since it does not optimize down to static_cast<>, you should prefer downcast<> over crosscast<> when you can. Redefined running_device to be a proper C++ class (now called device_t). Same for device_config (still called device_config). All devices and device_configs must now be derived from these base classes. This means each device type now has a pair of its own unique classes that describe the device. Drivers are encouraged to use the specific device types instead of the generic running_device or device_t classes. Drivers that have a state class defined in their header file are encouraged to use initializers off the constructor to locate devices. [Aaron Giles] Removed the following fields from the device and device configuration classes as they never were necessary or provided any use: device class, device family, source file, version, credits. [Aaron Giles] Added templatized variant of machine->device() which performs a downcast as part of the device fetch. Thus machine->device<timer_device>("timer") will locate a device named "timer", downcast it to a timer_device, and assert if the downcast fails. [Aaron Giles] Removed most publically accessible members of running_device/device_t in favor of inline accessor functions. The only remaining public member is machine. Thus all references to device->type are now device->type(), etc. [Aaron Giles] Created a number of device interface classes which are designed to be mix- ins for the device classes, providing specific extended functionality and information. There are standard interface classes for sound, execution, state, nvram, memory, and disassembly. Devices can opt into 0 or more of these classes. [Aaron Giles] Converted the classic CPU device to a standard device that uses the execution, state, memory, and disassembly interfaces. Used this new class (cpu_device) to implement the existing CPU device interface. In the future it will be possible to convert each CPU core to its own device type, but for now they are still all CPU devices with a cpu_type() that specifies exactly which kind of CPU. [Aaron Giles] Created a new header devlegcy.h which wraps the old device interface using some special template classes. To use these with an existing device, simply remove from the device header the DEVICE_GET_INFO() declaration and the #define mapping the ALL_CAPS name to the DEVICE_GET_INFO. In their place #include "devlegcy.h" and use the DECLARE_LEGACY_DEVICE() macro. In addition, there is a DECLARE_LEGACY_SOUND_DEVICE() macro for wrapping existing sound devices into new-style devices, and a DECLARE_LEGACY_NVRAM_DEVICE() for wrapping NVRAM devices. Also moved the token and inline_config members to the legacy device class, as these are not used in modern devices. [Aaron Giles] Converted the standard base devices (VIDEO_SCREEN, SPEAKER, and TIMER) from legacy devices to the new C++ style. Also renamed VIDEO_SCREEN to simply SCREEN. The various global functions that were previously used to access information or modify the state of these devices are now replaced by methods on the device classes. Specifically: video_screen_configure() == screen->configure() video_screen_set_visarea() == screen->set_visible_area() video_screen_update_partial() == screen->update_partial() video_screen_update_now() == screen->update_now() video_screen_get_vpos() == screen->vpos() video_screen_get_hpos() == screen->hpos() video_screen_get_vblank() == screen->vblank() video_screen_get_hblank() == screen->hblank() video_screen_get_width() == screen->width() video_screen_get_height() == screen->height() video_screen_get_visible_area() == screen->visible_area() video_screen_get_time_until_pos() == screen->time_until_pos() video_screen_get_time_until_vblank_start() == screen->time_until_vblank_start() video_screen_get_time_until_vblank_end() == screen->time_until_vblank_end() video_screen_get_time_until_update() == screen->time_until_update() video_screen_get_scan_period() == screen->scan_period() video_screen_get_frame_period() == screen->frame_period() video_screen_get_frame_number() == screen->frame_number() timer_device_adjust_oneshot() == timer->adjust() timer_device_adjust_periodic() == timer->adjust() timer_device_reset() == timer->reset() timer_device_enable() == timer->enable() timer_device_enabled() == timer->enabled() timer_device_get_param() == timer->param() timer_device_set_param() == timer->set_param() timer_device_get_ptr() == timer->get_ptr() timer_device_set_ptr() == timer->set_ptr() timer_device_timeelapsed() == timer->time_elapsed() timer_device_timeleft() == timer->time_left() timer_device_starttime() == timer->start_time() timer_device_firetime() == timer->fire_time() Updated all drivers that use the above functions to fetch the specific device type (timer_device or screen_device) and call the appropriate method. [Aaron Giles] Changed machine->primary_screen and the 'screen' parameter to VIDEO_UPDATE to specifically pass in a screen_device object. [Aaron Giles] Defined a new custom interface for the Z80 daisy chain. This interface behaves like the standard interfaces, and can be added to any device that implements the Z80 daisy chain behavior. Converted all existing Z80 daisy chain devices to new-style devices that inherit this interface. [Aaron Giles] Changed the way CPU state tables are built up. Previously, these were data structures defined by a CPU core which described all the registers and how to output them. This functionality is now part of the state interface and is implemented via the device_state_entry class. Updated all CPU cores which were using the old data structure to use the new form. The syntax is currently awkward, but will be cleaner for CPUs that are native new devices. [Aaron Giles] Converted the okim6295 and eeprom devices to the new model. These were necessary because they both require multiple interfaces to operate and it didn't make sense to create legacy device templates for these single cases. (okim6295 needs the sound interface and the memory interface, while eeprom requires both the nvram and memory interfaces). [Aaron Giles] Changed parameters in a few callback functions from pointers to references in situations where they are guaranteed to never be NULL. [Aaron Giles] Removed MDRV_CPU_FLAGS() which was only used for disabling a CPU. Changed it to MDRV_DEVICE_DISABLE() instead. Updated drivers. [Aaron Giles] Reorganized the token parsing for machine configurations. The core parsing code knows how to create/replace/remove devices, but all device token parsing is now handled in the device_config class, which in turn will make use of any interface classes or device-specific token handling for custom token processing. [Aaron Giles] Moved many validity checks out of validity.c and into the device interface classes. For example, address space validation is now part of the memory interface class. [Aaron Giles] Consolidated address space parameters (bus width, endianness, etc.) into a single address_space_config class. Updated all code that queried for address space parameters to use the new mechanism. [Aaron Giles]
* Remove some aliases between CPUINFO_ and DEVINFO_ to help clarify Aaron Giles2010-01-211-9/+9
| | | | | | usage. Also converted a few more places to use the new accessors.
* Correct a long-standing design flaw: device configuration state Aaron Giles2010-01-182-13/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | is now separate from runtime device state. I have larger plans for devices, so there is some temporary scaffolding to hold everything together, but this first step does separate things out. There is a new class 'running_device' which represents the state of a live device. A list of these running_devices sits in machine->devicelist and is created when a running_machine is instantiated. To access the configuration state, use device->baseconfig() which returns a reference to the configuration. The list of running_devices in machine->devicelist has a 1:1 correspondance with the list of device configurations in machine->config->devicelist, and most navigation options work equally on either (scanning by class, type, etc.) For the most part, drivers will now deal with running_device objects instead of const device_config objects. In fact, in order to do this patch, I did the following global search & replace: const device_config -> running_device device->static_config -> device->baseconfig().static_config device->inline_config -> device->baseconfig().inline_config and then fixed up the compiler errors that fell out. Some specifics: Removed device_get_info_* functions and replaced them with methods called get_config_*. Added methods for get_runtime_* to access runtime state from the running_device. DEVICE_GET_INFO callbacks are only passed a device_config *. This means they have no access to the token or runtime state at all. For most cases this is fine. Added new DEVICE_GET_RUNTIME_INFO callback that is passed the running_device for accessing data that is live at runtime. In the future this will go away to make room for a cleaner mechanism. Cleaned up the handoff of memory regions from the memory subsystem to the devices.
* Within src/emu, basic conversions: Aaron Giles2010-01-121-1/+1
| | | | | | devtag_get_device ... machine->device() memory_find_address_space ... device->space()
* First round of an attempted cleanup of header files in the system. Aaron Giles2010-01-103-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Created new central header "emu.h"; this should be included by pretty much any driver or device as the first include. This file in turn includes pretty much everything a driver or device will need, minus any other devices it references. Note that emu.h should *never* be included by another header file. - Updated all files in the core (src/emu) to use emu.h. - Removed a ton of redundant and poorly-tracked header includes from within other header files. - Temporarily changed driver.h to map to emu.h until we update files outside of the core. Added class wrapper around tagmap so it can be directly included and accessed within objects that need it. Updated all users to embed tagmap objects and changed them to call through the class. Added nicer functions for finding devices, ports, and regions in a machine: machine->device("tag") -- return the named device, or NULL machine->port("tag") -- return the named port, or NULL machine->region("tag"[, &length[, &flags]]) -- return the named region and optionally its length and flags Made the device tag an astring. This required touching a lot of code that printed the device to explicitly fetch the C-string from it. (Thank you gcc for flagging that issue!)
* Results of running the latest srcclean. Aaron Giles2009-12-281-4/+4
|
* Another step. Moved the address-space related get_info constants Aaron Giles2009-07-081-6/+6
| | | | | | to devintrf (including endianness). Removed space array from the CPU class header. Made the memory system much more device-neutral. Various other cleanups along the way.
* CPU cores now compile cleanly. Aaron Giles2009-03-151-7/+16
|
* More cleanup. Added address-space-specific constants for the various Aaron Giles2008-12-201-9/+9
| | | | | | | | | | | | | | bus width and shift CPU interface constants. Changed all the cores to use them. Minor spacing cleanup in Z80, Z180, TMS34010, ADSP21xx cores. Changed ADSP21xx cores to accept a configuration struct instead of using set_info to specify serial port callbacks. Simplified the ADSP21xx get/set info significantly. Removed support for only including certain variants of the chips; they are now either all supported or all unsupported.
* Renamed CPUINFO_PTR_* to CPUINFO_FCT_* for function get infos. Aaron Giles2008-12-191-6/+6
| | | | Changed Z80 over to the new cpu_state_table mechanism.
* From: Atari Ace [atari_ace@verizon.net] Aaron Giles2008-12-171-0/+1
| | | | | | | | | | | | | | | | | | | | | Sent: Tuesday, December 16, 2008 12:20 PM To: submit@mamedev.org Cc: atariace@hotmail.com Subject: [patch] Migrate CPU defines to cpu header files Hi mamedev, This patch migrates all the CPU definitions into the cpu header files. The #defines and CPU_GET_INFO declarations were added by hand to the cpu cores in the first patch, plus a few partly related fixes to the non-DRC cores. The second patch was produced by the attached script which inserts all needed #includes, except for two that were added by hand in the first patch. The first patch also removed an extra define of N2A03_DEFAULTCLOCK that would have caused problems with the second patch. ~aa
* Cleanups and version bump. Aaron Giles2008-12-151-1/+1
|
* Removed get context/set context calls from the CPU interface entirely. Aaron Giles2008-12-111-2/+0
| | | | Pointer-ified the TMS99xx core (missed that one!)
* Pointer-ified the sc61860 core. Aaron Giles2008-12-104-562/+557
|
* CPU_IS_LE -> ENDIANNESS_LITTLE Aaron Giles2008-12-041-1/+1
| | | | | | CPU_IS_BE -> ENDIANNESS_BIG Also fixed help for step over/in to specify correct keys.
* Changed timer_alloc, timer_set, timer_pulse, timer_call_after_resynch, Aaron Giles2008-11-261-1/+1
| | | | | and timer_get_time to pass the machine parameter. Moved timer globals to hang off of the running_machine.
* Cleanups and version bump for 0.128u4.mame0128u4 Aaron Giles2008-11-241-1/+1
|
* change_pc? What change_pc? Aaron Giles2008-11-242-13/+1
|
* Removed NO_LEGACY_MEMORY_HANDLERS defines. Aaron Giles2008-11-241-1/+0
|
* Removed memory context switch. Let the fun begin. Aaron Giles2008-11-241-2/+0
|
* More memory conversions. Aaron Giles2008-11-232-6/+12
|
* Debugger interfaces cleanup. Still more to do but this compiles and Aaron Giles2008-11-211-1/+1
| | | | | | | works. Added callback parameters to the expression engine. Improved CPU parsing so you can use a CPU tag or index in most commands that take one. Switched to passing CPU and address space objects around where appropriate. Lots of other minor tweaks.
* Generalized the concept of opbase access into "direct" access. Aaron Giles2008-11-172-5/+5
| | | | | | | | Removed opbase globals to the address_space structure. Cleaned up names of pointers (decrypted and raw versus rom and ram). Added inline functions to read/write data via any address space. Added macros for existing functions to point them to the new functions. Other related cleanups.
* This patch replaces the Machine parameter where an running_machine * Aaron Giles2008-11-131-2/+1
| | | | | | is available and removes the deprecat.h where unnecessary. [Oliver Stoeneberg]
* Massive API cleanup/change. The primary goal is that all CPU- Aaron Giles2008-11-131-23/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | related APIs now take a device pointer instead of an index. All functions that take a CPU device are prefixed with cpu_* All functions that are globally related to cpu execution are prefixed with cpuexec_*. Below is a list of some of the mappings: cpu_boost_interleave -> cpuexec_boost_interleave cpunum_suspend -> cpu_suspend cpunum_resume -> cpu_resume cpunum_is_suspended -> cpu_is_suspended cpunum_get_clock -> cpu_get_clock cpunum_set_clock -> cpu_set_clock cpunum_get_clockscale -> cpu_get_clockscale cpunum_set_clockscale -> cpu_set_clockscale cpunum_get_localtime -> cpu_get_local_time cpunum_gettotalcycles -> cpu_get_total_cycles activecpu_eat_cycles -> cpu_eat_cycles activecpu_adjust_icount -> cpu_adjust_icount cpu_trigger -> cpuexec_trigger cpu_triggertime -> cpuexec_triggertime cpunum_set_input_line -> cpu_set_input_line cpunum_set_irq_callback -> cpu_set_irq_callback In addition, a number of functions retain the same name but now require a specific CPU parameter to be passed in: cpu_yield cpu_spin cpu_spinuntil_time cpu_spinuntil_int cpu_spinuntil_trigger cpu_triggerint Merged cpuint.c into cpuexec.c. One side-effect of this change is that driver reset callbacks are called AFTER the CPUs and devices are reset. This means that if you make changes to the CPU state and expect the reset vectors to recognize the changes in your reset routine, you will need to manually reset the CPU after making the change (since it has already been reset). Added a number of inline helper functions to cpuintrf.h for managing addresses Removed cpu_gettotalcpu(). This information is rarely needed outside of the core and can be obtained by looking at the machine->cpu[] array. Changed CPU interrupt acknowledge callbacks to pass a CPU device instead of machine/cpunum pair. Changed VBLANK and periodic timer callbacks to pass a CPU device instead of machine/cpunum pair. Renamed all information getters from cpu_* to cpu_get_* and from cputype_* to cputype_get_*.
* Populated tag and static_config parts of fake CPU device. Removed 'config' Aaron Giles2008-11-091-1/+1
| | | | | parameter from CPU_INIT. Modified CPU cores to pull config from the device static_config.
* Added macros for all CPU callbacks to ease future changes. Aaron Giles2008-11-083-22/+22
| | | | Updated all CPU cores to use them.
* WARNING: This is a significant change. If you are risk-averse and Aaron Giles2008-11-061-6/+6
| | | | | | | | | | | | | | | | | | | | | working on something, hold off syncing. Defined macros for core CPU functions: CPU_INIT, CPU_RESET, CPU_EXIT, CPU_EXECUTE, along with macros for the name and for calling, in the spirit of the devintrf.h macros. More will come later. Changed init, reset, exit, and execute interfaces to be passed a const device_config * object. This is a fake object for the moment, but encapsulates the machine pointer and token. Eventually this will be a real device. Changed the CPU IRQ callbacks to a proper type, and added a device parameter to them. Updated all CPU cores to the new macros and parameters. Note that this changes the way we "pointer"-ify cores. I'll send an update shortly.
* From Oliver Stoeneberg [oliverst@online.de] Aaron Giles2008-09-041-0/+1
| | | | | | | | | | | | | | | | | | | | | | | This contains three different patches: 20080829.patch Introducing the running_machine* parameter in a few more places. Next step would be to make the execute_* function aware of it, if that's OK. Also used the machine parameter in memory.c were it's available. 20080829_1.patch The already discussed and probably being rejected removal of dreprecat.h from debugger.h. I think this is a low-risk patch (we had worse cleanups) and it lowers the risk of new code using deprecated function beign introduced in MAME/MESS, because there is no invisible inclusion of deprecat.h anymore (I think one driver - kofball.c - got it with deprecated code). 20080829_2.patch The last Machine -> machine conversion I had sitting in my local tree. I know the proper way is to turn them into devices, but I still haven't looked into that.
* Final CPU header updates. Mostly just re-naming the re-inclusions. Derrick Renaud2008-08-134-9/+16
| | | | | The structures/names were getting too complex for my macros to handle. They would require hand editing and my computer is too slow to keep re-compiling. Passes a clean compile.