summaryrefslogtreecommitdiffstatshomepage
path: root/src/devices/sound/ymz280b.h
Commit message (Collapse)AuthorAgeFilesLines
* New sound infrastructure. Olivier Galibert9 days1-1/+1
| | | | | | | | | | | | | | | | | | Should be added soon: - mute - lua hookup (with documentation) - speaker/microphone resampling To be added a little later: - compression - reverb Needs to be added by someone else: - coreaudio - direct - portaudio - xaudio2 - js
* Added ATTR_COLD to common lifecycle methods for many files in src/devices. ↵ holub2024-09-271-2/+2
| | | | (#12822)
* dirom: added pre and post rom bank change callbacks and changed almost all ↵ hap2022-10-041-1/+1
| | | | users to 'pre'
* - Removed device_timer, device_timer_id, et al in favor of direct callback ↵ MooglyGuy2022-06-041-8/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | members. (#9788) Primarily, this removes device_t::device_timer, device_t::timer_set, device_t::synchronize, device_t::timer_expired, and device_timer_id. Use of device_timer often resulted in unnecessary trampolining in addition to switch/case overhead on a driver/device level, and additional logic to manage delegated vs. ID-based timers on a core level. In the worst cases, devices were performing a switch/case with only one valid case. device_scheduler::timer_set is marked deprecated as the only remaining direct uses are via the Lua engine and a few drivers that need refactoring anyway. The remaining uses occur via device_scheduler::synchronize. As a middle ground between the extremely short timer_alloc() and the extremely long machine().scheduler().timer_alloc(timer_expired_delegate(FUNC(widget_device::contoso_tick), this)), a helper function in device_t has been added which can be invoked with the following syntax: timer_alloc(FUNC(widget_device::contoso_tick), this) - Additional changes/cleanups performed along the way: - Converted to use logmacro: * src/devices/bus/ieee488/hp9895.cpp * src/devices/bus/ieee488/remote488.cpp * src/devices/bus/isa/hdc.cpp * src/devices/bus/isa/omti8621.cpp * src/devices/bus/isa/sc499.cpp * src/devices/bus/vip/vp550.cpp * src/devices/cpu/i86/i186.cpp * src/devices/cpu/lc8670/lc8670.cpp * src/devices/machine/68230pit.cpp * src/devices/machine/corvushd.cpp * src/devices/machine/ds1994.cpp * src/devices/machine/ticket.cpp * src/mame/audio/pinsnd88.cpp * src/mame/drivers/notetaker.cpp * src/mame/machine/asic65.cpp * src/mame/machine/rmnimbus.cpp * src/mame/machine/victor9k_fdc.cpp * src/mame/video/uv201.cpp - Made usage of m_member prefix consistent: * src/devices/bus/isa/hdc.cpp * src/devices/bus/isa/omti8621.cpp * src/devices/bus/vme/vme_fccpu20.cpp * src/devices/machine/ds1386.cpp * src/devices/machine/i7220.cpp - Spacing consistency pass: * src/devices/bus/isa/hdc.cpp * src/devices/bus/isa/omti8621.cpp * src/devices/bus/thomson/nanoresau.cpp * src/devices/bus/ti99/internal/992board.cpp * src/devices/bus/ti99/internal/genkbd.cpp * src/devices/bus/ti99/internal/joyport/handset.cpp * src/devices/bus/vme/vme_fccpu20.cpp * src/devices/cpu/i86/i186.cpp * src/devices/cpu/lc8670/lc8670.cpp * src/devices/machine/68230pit.cpp * src/devices/machine/cop452.cpp * src/devices/machine/corvushd.cpp * src/devices/machine/hp_dc100_tape.cpp * src/devices/machine/hp_taco.cpp * src/devices/machine/meters.cpp * src/devices/machine/microtch.cpp * src/devices/machine/phi.cpp * src/devices/video/ef9365.cpp * src/devices/video/v9938.cpp * src/mame/drivers/alphaskop41xx.cpp * src/mame/drivers/myb3k.cpp * src/mame/drivers/notetaker.cpp * src/mame/drivers/wpc_an.cpp * src/mame/machine/midikbd.cpp * src/mame/machine/rmnimbus.cpp * src/mame/machine/wpc_lamp.cpp * src/mame/machine/wpc_out.cpp - Removed string-based ioport lookups: * src/devices/bus/ti99/internal/joyport/handset.cpp * src/devices/bus/ti99/internal/joyport/mecmouse.cpp * src/devices/bus/vme/vme_hcpu30.cpp * src/mame/machine/k7659kb.cpp * src/mame/machine/ti85.cpp - Adjustments to grammar/wording in comments * src/devices/bus/sms_ctrl/lphaser.cpp * src/devices/bus/sms_ctrl/sports.cpp * src/devices/bus/snes/event.cpp * src/devices/bus/snes/sa1.cpp * src/devices/bus/thomson/nanoresau.cpp * src/devices/bus/z88/z88.cpp * src/devices/machine/ds1386.cpp * src/devices/machine/vic_pl192.cpp - Favored BIT() macro for single-bit checks * src/devices/bus/ti99/internal/992board.cpp * src/devices/bus/ti99/joyport/handset.cpp * src/mame/drivers/notetaker.cpp * src/mame/machine/wpc_lamp.cpp * src/mame/machine/wpc_out.cpp - Removed C89-style variable declarations when noticed * src/devices/bus/isa/hdc.cpp * src/devices/bus/sms_ctrl/lphaser.cpp * src/devices/bus/ti99/joyport/mecmouse.cpp * src/devices/machine/acorn_vidc.cpp * src/devices/sound/ymz280b.cpp * src/devices/video/vic4567.cpp - Removed FUNCNAME to avoid compiler-specific #define checks in devices * src/devices/bus/vme/vme_fccpu20.cpp * src/devices/bus/vme/vme_hcpu30.cpp * src/devices/machine/68230pit.cpp * src/devices/machine/mc14411.cpp * src/mame/drivers/myb3k.cpp - Removed unecessary member prefixes/suffixes * src/devices/video/ef9340_1.cpp * src/mame/drivers/fuukifg2.cpp * src/mame/drivers/fuukifg3.cpp * src/mame/drivers/intv.cpp * src/mame/drivers/simpsons.cpp * src/mame/drivers/socrates.cpp * src/mame/drivers/special_gambl.cpp * src/mame/drivers/sprint4.cpp * src/mame/drivers/ti990_10.cpp * src/mame/drivers/tubep.cpp * src/mame/drivers/vectrex.cpp * src/mame/drivers/wpc_an.cpp * src/mame/drivers/wpc_dot.cpp * src/mame/drivers/wpc_flip1.cpp * src/mame/drivers/wpc_flip2.cpp * src/mame/machine/z80ne.cpp * src/mame/video/rollerg.cpp - Switched to lower-case hex constants * src/devices/video/ef9365.cpp * src/mame/machine/rmnimbus.cpp - Re-ordered driver overrides and function members * src/mame/drivers/boxer.cpp * src/mame/drivers/eurocom2.cpp * src/mame/drivers/exidy.cpp * src/mame/drivers/gpworld.cpp * src/mame/drivers/h19.cpp * src/mame/drivers/ibmpcjr.cpp * src/mame/drivers/mekd5.cpp * src/mame/drivers/mgolf.cpp * src/mame/drivers/myb3k.cpp * src/mame/drivers/nightmare.cpp * src/mame/drivers/notetaker.cpp * src/mame/drivers/ptcsol.cpp * src/mame/drivers/pwrview.cpp * src/mame/drivers/rabbit.cpp * src/mame/drivers/sitcom.cpp * src/mame/drivers/socrates.cpp * src/mame/drivers/sprint4.cpp * src/mame/drivers/techno.cpp * src/mame/drivers/thayers.cpp * src/mame/drivers/ti990_10.cpp * src/mame/drivers/ti990_4.cpp * src/mame/drivers/tv912.cpp * src/mame/drivers/tv990.cpp * src/mame/drivers/uchroma68.cpp * src/mame/drivers/vk100.cpp * src/mame/drivers/votrhv.cpp * src/mame/drivers/wicat.cpp * src/mame/drivers/wpc_an.cpp * src/mame/includes/abc80.h * src/mame/includes/asterix.h * src/mame/includes/fuukifg2.h * src/mame/includes/fuukifg3.h * src/mame/includes/gunbustr.h * src/mame/includes/intv.h * src/mame/includes/namcona1.h * src/mame/includes/newbrain.h * src/mame/includes/poly.h * src/mame/includes/prof80.h * src/mame/includes/rollerg.h * src/mame/includes/s11.h * src/mame/includes/segahang.h * src/mame/includes/simpsons.h * src/mame/includes/spacefb.h * src/mame/includes/tandy2k.h * src/mame/includes/trucocl.h * src/mame/includes/tubebp.h * src/mame/includes/vidbrain.h * src/mame/includes/wolfpack.h * src/mame/includes/wpc_dot.h - Made capitalization consistent on class members * src/devices/machine/meters.cpp * src/mame/drivers/namcona1.cpp * src/mame/drivers/notetaker.cpp -src/devices/bus/isa/hdc.cpp: * Removed fixed-size std::vector in favor of std::unique_ptr -src/devices/bus/isa/s3virge.cpp: * Moved unusually large (for a header) functions into .cpp from header -src/devices/bus/vip/vp550.cpp * Switched to required_device_array to simplify code paths -src/devices/machine/arm_iomd.cpp * Added initializers to constructor * Favored std::size over fixed static sizes -src/devices/machine/ds1386.cpp * Moved register #defines into header enums -src/devices/machine/mc68901.cpp * Removed unnecessary parameters and emu_timer::enable calls -src/devices/machine/mccs1850.cpp * Removed inline overuse -src/devices/machine/meters.cpp * Removed unused members -src/devices/machine/mos6526.cpp * Removed inline overuse -src/devices/machine/nsc810.cpp * Converted to arrays rather than individually-numbered members -src/devices/machine/pxa255.cpp * Simplified DMA transfer code -src/devices/machine/saa1043.cpp * Removed extraneous members in favor of resolve_all_safe -src/devices/machine/vic_pl192.cpp * Shifted constructors, start-up, and maps to be at the top of the source file -src/devices/machine/z8536.cpp * Removed stray uses of device_timer_id -src/devices/sound/cdp1869.cpp * Removed inline overuse -src/devices/sound/mos7360.cpp * Converted to arrays rather than individually-numbered members -src/emu/device.cpp * Removed ID-based timer_alloc * Removed timer_set * Removed synchronize * Removed timer_expired * Added shorthand timer_alloc to avoid lengthy machine().scheduler().timer_alloc() calls -src/emu/schedule.cpp * Removed now-unused m_id and m_device members -src/mame/audio/alesis.cpp * Added initializers to constructor -src/mame/drivers/alto2.cpp * Removed custom-named driver init in favor of driver_init override * Removed octal constant in favor of more standard hex -src/mame/drivers/astinvad.cpp * Fixed 'kamizake' typo -src/mame/drivers/tm990189.cpp * Removed unnecessary machine reset override -src/mame/drivers/unichamp.cpp * Removed custom-named driver init in favor of driver_init override -src/mame/drivers/votrhv.cpp * Fixed ROM_LOAD macros and region() usage in memory maps -src/mame/machine/victor9k_fdc.cpp * Made bracing style consistent across the file -src/mame/video/gime.cpp * Removed unnecessary void specifiers in function prototypes
* Remove void *ptr parameter from emu_timer, timer_device and all related ↵ AJR2022-01-261-1/+1
| | | | callbacks
* ym2203/ym2608/ym2610/ym2612/ymf262/ym3526/ym3812/y8950/ym2413/ymf271/ymf278b ↵ Aaron Giles2020-09-211-1/+1
| | | | /ymz280b/ymz770/zsg2: update to new stream callbacks
* Significant internal changes to sound streams (#7169) Aaron Giles2020-09-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Significant internal changes to sound streams: Abstracted buffers of sound data into an internal stream_buffer class, with helper classes read_stream_view and write_stream_view which offer readable/writable "views" into the buffers Internal sound calculations are all done using stream_buffer::sample_t, which is a 32-bit float; existing callbacks are supported through an adapter that converts to/from signed 32-bit integers Improved behavior of dynamic stream sample rate changes to resample a short runway of data to preserve continuity across transitions Created a new stream update callback which passes a std::vector of read_stream_views for inputs, and a std::vector of write_stream_views for outputs Updated core mixer and speaker devices to the new stream update callback Updated the following sound cores to the new stream update callback: ay8910, dac, k054539, msm5205, namco, netlist, okim6295, pokey, samples, sn76496, sp0250, tms5220, tms57002, upd7759, vgm_visualizer, volt_reg Changed existing stream update callback to make inputs explicitly const and the output pointers const as well, since they are re-used across calls; fixed several engines that violated this rule Sound_manager::stream_alloc can no longer automatically connect to a device's sound_stream_update callback; instead, the stream_alloc() on the sound_device_interface should be called; updated many violators of this rule Streams can be created with SAMPLE_RATE_OUTPUT_ADAPTIVE, which dynamically tracks the sample rate of its first downstream output, or with SAMPLE_RATE_INPUT_ADAPTIVE, which tracks the sample rate of its first input Changed resampling to be a separate sound_stream that is invoked as needed, opening the path for selectable resampling implementations Added a flags parameter to the new stream allocation method that allows you to specify a that input streams should not be resampled Exposed stream_input and stream_output classes directly, simplifying access to user gains and stream names Added a simple dynamic compressor to sound_manager to provide nicer results when overdriven sound happens; compression does not affect speaker_report results Improved verbose speaker_report to print a graph of peaks over time More aggressive debugging enabled for now even in release builds (should be disabled prior to next release) via SOUND_DEBUG define in sound.h; report any assertions for fixing
* ymz280b.cpp: Modernize save state, Fix frequency calculation (#6922) cam9002020-07-101-48/+48
| | | Allow side effects, Reduce unnecessary defines, Use shorter/correct type names, Fix spacings, Add notes
* emumem: A little more speedup. cache and specific change syntax, and are ↵ Olivier Galibert2020-05-251-1/+2
| | | | | | | | | | | | | | | | not pointers anymore [O. Galibert] The last(?) two changes are: - Add a template parameter to everything (theoretically the address space width, in practice a level derived from it to keep as much compatibility between widths as possible) so that the shift size becomes a constant. - Change the syntax of declaring and initializing the caches and specifics so that they're embedded in the owner device. Solves lifetime issues and also removes one indirection (looking up the base dispatch pointer through the cache/specific pointer).
* (nw) Clean up the mess on master Vas Crabb2019-03-261-2/+2
| | | | | | | | | | | | | This effectively reverts b380514764cf857469bae61c11143a19f79a74c5 and c24473ddff715ecec2e258a6eb38960cf8c8e98e, restoring the state at 598cd5227223c3b04ca31f0dbc1981256d9ea3ff. Before pushing, please check that what you're about to push is sane. Check your local commit log and ensure there isn't anything out-of-place before pushing to mainline. When things like this happen, it wastes everyone's time. I really don't need this in a week when real work™ is busting my balls and I'm behind where I want to be with preparing for MAME release.
* Revert "conflict resolution (nw)" andreasnaive2019-03-251-2/+2
| | | | | This reverts commit c24473ddff715ecec2e258a6eb38960cf8c8e98e, reversing changes made to 009cba4fb8102102168ef32870892438327f3705.
* ymz280b.cpp : Remove unnecessary arguments in handlers cam9002019-02-021-2/+2
|
* -bus/a7800/a78_slot, bus/astrocde/exp, slot, pc_joy/pc_joy, vcs/vcs_slot, : ↵ mooglyguy2018-12-181-4/+0
| | | | | | | | | | | | | | | | | Removed MCFG macros. [Ryan Holtz] -bus/a7800/hiscore, xboard, isa/gblaster, sb16, sblaster, ssi2001, stereo_fx, bus/msx_cart/moonsound: Removed MACHINE_CONFIG macros. [Ryan Holtz] -sound/astrocde, es5506, qs1000, saa1099, t6721a, tc8830f, tiaintf, tms3615, upd7752, ymf278b, ymz280b: Removed MCFG macros. [Ryan Holtz] -video/ef9369: Removed MCFG macros. [Ryan Holtz] -drivers/a2600, a7800, astrocde, astrohome, bingor, bishi, eolith, esqasr, esqmr, fuukifg3, ghosteo, guab, jpmsys5, limenko, lordgun, macrossp, mastboy, mpu4vid, psikyo, psikyo4, psikyosh, samcoupe, ssv, timeplt, vamphalf, vegaeo, xorworld: Removed MCFG macros. [Ryan Holtz] -drivers/cave: Removed MCFG macros and moved common config into common functions. [Ryan Holtz] -drivers/tourtabl: Removed MCFG macros and corrected CPU type. [Ryan Holtz]
* devcb3 Vas Crabb2018-07-071-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are multiple issues with the current device callbacks: * They always dispatch through a pointer-to-member * Chained callbacks are a linked list so the branch unit can't predict the early * There's a runtime decision made on the left/right shift direction * There are runtime NULL checks on various objects * Binding a lambda isn't practical * Arbitrary transformations are not supported * When chaining callbacks it isn't clear what the MCFG_DEVCB_ modifiers apply to * It isn't possible to just append to a callback in derived configuration * The macros need a magic, hidden local called devcb * Moving code that uses the magic locals around is error-prone * Writing the MCFG_ macros to make a device usable is a pain * You can't discover applicable MCFG_ macros with intellisense * Macros are not scoped * Using an inappropriate macro isn't detected at compile time * Lots of other things This changeset overcomes the biggest obstacle to remving MCFG_ macros altogether. Essentially, to allow a devcb to be configured, call .bind() and expose the result (a bind target for the callback). Bind target methods starting with "set" repace the current callbacks; methods starting with "append" append to them. You can't reconfigure a callback after resolving it. There's no need to use a macro matching the handler signatures - use FUNC for everything. Current device is implied if no tag/finder is supplied (no need for explicit this). Lambdas are supported, and the memory space and offset are optional. These kinds of things work: * .read_cb().set([this] () { return something; }); * .read_cb().set([this] (offs_t offset) { return ~offset; }); * .write_cb().set([this] (offs_t offset, u8 data) { m_array[offset] = data; }); * .write_cb().set([this] (int state) { some_var = state; }); Arbitrary transforms are allowed, and they can modify offset/mask for example: * .read_cb().set(FUNC(my_state::handler)).transform([] (u8 data) { return bitswap<4>(data, 1, 3, 0, 2); }); * .read_cb().set(m_dev, FUNC(some_device::member)).transform([] (offs_t &offset, u8 data) { offset ^= 3; return data; }); It's possible to stack arbitrary transforms, at the cost of compile time (the whole transform stack gets inlined at compile time). Shifts count as an arbitrary transform, but mask/exor does not. Order of mask/shift/exor now matters. Modifications are applied in the specified order. These are NOT EQUIVALENT: * .read_cb().set(FUNC(my_state::handler)).mask(0x06).lshift(2); * .read_cb().set(FUNC(my_state::handler)).lshift(2).mask(0x06); The bit helper no longer reverses its behaviour for read callbacks, and I/O ports are no longer aware of the field mask. Binding a read callback to no-op is not supported - specify a constant. The GND and VCC aliases have been removed intentionally - they're TTL-centric, and were already being abused. Other quirks have been preserved, including write logger only logging when the data is non-zero (quite unhelpful in many of the cases where it's used). Legacy syntax is still supported for simple cases, but will be phased out. New devices should not have MCFG_ macros. I don't think I've missed any fundamental issues, but if I've broken something, let me know.
* de-staticify initializations for src/devices/sound (nw) Wilbert Pol2018-02-251-3/+3
|
* ymz280b : Add device_rom_interface instead external memory handlers (#3242) cam9002018-02-191-14/+4
| | | | | | | * ymz280b : Add device_rom_interface instead external memory handlers firebeat.cpp : Minor cleanups, Split main CPU memory maps related for number of allocated gcu chips in PCB * ymz280b : Fix compile
* ymz280b: Implement device_clock_changed (nw) AJR2017-06-271-0/+1
|
* Move static data out of devices into the device types. This is a ↵ Vas Crabb2017-05-141-14/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | significant change, so please pay attention. The core changes are: * Short name, full name and source file are no longer members of device_t, they are part of the device type * MACHINE_COFIG_START no longer needs a driver class * MACHINE_CONFIG_DERIVED_CLASS is no longer necessary * Specify the state class you want in the GAME/COMP/CONS line * The compiler will work out the base class where the driver init member is declared * There is one static device type object per driver rather than one per machine configuration Use DECLARE_DEVICE_TYPE or DECLARE_DEVICE_TYPE_NS to declare device type. * DECLARE_DEVICE_TYPE forward-declares teh device type and class, and declares extern object finders. * DECLARE_DEVICE_TYPE_NS is for devices classes in namespaces - it doesn't forward-declare the device type. Use DEFINE_DEVICE_TYPE or DEFINE_DEVICE_TYPE_NS to define device types. * These macros declare storage for the static data, and instantiate the device type and device finder templates. The rest of the changes are mostly just moving stuff out of headers that shouldn't be there, renaming stuff for consistency, and scoping stuff down where appropriate. Things I've actually messed with substantially: * More descriptive names for a lot of devices * Untangled the fantasy sound from the driver state, which necessitates breaking up sound/flip writes * Changed DECO BSMT2000 ready callback into a device delegate * Untangled Microprose 3D noise from driver state * Used object finders for CoCo multipak, KC85 D002, and Irem sound subdevices * Started to get TI-99 stuff out of the TI-990 directory and arrange bus devices properly * Started to break out common parts of Samsung ARM SoC devices * Turned some of FM, SID, SCSP DSP, EPIC12 and Voodoo cores into something resmbling C++ * Tried to make Z180 table allocation/setup a bit safer * Converted generic keyboard/terminal to not use WRITE8 - space/offset aren't relevant * Dynamically allocate generic terminal buffer so derived devices (e.g. teleprinter) can specify size * Imporved encapsulation of Z80DART channels * Refactored the SPC7110 bit table generator loop to make it more readable * Added wrappers for SNES PPU operations so members can be made protected * Factored out some boilerplate for YM chips with PSG * toaplan2 gfx * stic/intv resolution * Video System video * Out Run/Y-board sprite alignment * GIC video hookup * Amstrad CPC ROM box members * IQ151 ROM cart region * MSX cart IRQ callback resolution time * SMS passthrough control devices starting subslots I've smoke-tested several drivers, but I've probably missed something. Things I've missed will likely blow up spectacularly with failure to bind errors and the like. Let me know if there's more subtle breakage (could have happened in FM or Voodoo). And can everyone please, please try to keep stuff clean. In particular, please stop polluting the global namespace. Keep things out of headers that don't need to be there, and use things that can be scoped down rather than macros. It feels like an uphill battle trying to get this stuff under control while more of it's added.
* Remove emu.h from headers (nw) Olivier Galibert2017-02-111-1/+0
| | | | | | | | | | | | Per Vas' request. If the compile fails for you (i'm thinking osx and windows native debuggers here in particular), add '#include "emu.h"' as first include of the cpp files that fail. Due to our use of precompilation and forced inclusion, emu.h must be included as the very first non-comment thing we do if we want to be sure msvc compiles are identical to gcc/clang ones. Doing it directly instead of through an include increases the correctness probability by a magnitude.
* Remove device_config_complete from numerous devices that don't really need ↵ AJR2017-02-091-1/+0
| | | | it (nw)
* NOTICE (TYPE NAME CONSOLIDATION) Miodrag Milanovic2016-10-221-47/+47
| | | | | Use standard uint64_t, uint32_t, uint16_t or uint8_t instead of UINT64, UINT32, UINT16 or UINT8 also use standard int64_t, int32_t, int16_t or int8_t instead of INT64, INT32, INT16 or INT8
* reverting: Miodrag Milanovic2016-01-201-1/+1
| | | | | | | SHA-1: 1f90ceab075c4869298e963bf0a14a0aac2f1caa * tags are now strings (nw) fix start project for custom builds in Visual Studio (nw)
* tags are now strings (nw) Miodrag Milanovic2016-01-161-1/+1
| | | | fix start project for custom builds in Visual Studio (nw)
* removed auto_bitmap_ind*_alloc and auto_bitmap_rgb32_alloc and replaced with ↵ Miodrag Milanovic2015-12-171-1/+1
| | | | | | | std::unique_ptr (nw) auto_alloc_array to unique_ptr Added make_unique_clear
* override part 3 (nw) Miodrag Milanovic2015-12-051-6/+6
|
* Move all devices into separate part of src tree (nw) Miodrag Milanovic2015-09-131-0/+133