summaryrefslogtreecommitdiffstatshomepage
path: root/src/devices/machine/smpc.h (follow)
Commit message (Collapse)AuthorAgeFilesLines
* RTC interface updates AJR2023-02-031-1/+8
| | | | | | | - dp8573, mc146818, mm58274c, rtc65271, s3520cf, smpc, timekpr: Use device_rtc_interface to acquire base time - device_rtc_interface: Add machine configuration option for synchronizing to UTC instead of local time (was previously only an option for mc146818, and always enabled for dp8573) - mc146818: Eliminate the set_binary_time configuration parameter - mm58274c: Correct operator precedence in calculating m_clk_set; allow disabling side effects of status read
* - Removed device_timer, device_timer_id, et al in favor of direct callback ↵ MooglyGuy2022-06-041-9/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | members. (#9788) Primarily, this removes device_t::device_timer, device_t::timer_set, device_t::synchronize, device_t::timer_expired, and device_timer_id. Use of device_timer often resulted in unnecessary trampolining in addition to switch/case overhead on a driver/device level, and additional logic to manage delegated vs. ID-based timers on a core level. In the worst cases, devices were performing a switch/case with only one valid case. device_scheduler::timer_set is marked deprecated as the only remaining direct uses are via the Lua engine and a few drivers that need refactoring anyway. The remaining uses occur via device_scheduler::synchronize. As a middle ground between the extremely short timer_alloc() and the extremely long machine().scheduler().timer_alloc(timer_expired_delegate(FUNC(widget_device::contoso_tick), this)), a helper function in device_t has been added which can be invoked with the following syntax: timer_alloc(FUNC(widget_device::contoso_tick), this) - Additional changes/cleanups performed along the way: - Converted to use logmacro: * src/devices/bus/ieee488/hp9895.cpp * src/devices/bus/ieee488/remote488.cpp * src/devices/bus/isa/hdc.cpp * src/devices/bus/isa/omti8621.cpp * src/devices/bus/isa/sc499.cpp * src/devices/bus/vip/vp550.cpp * src/devices/cpu/i86/i186.cpp * src/devices/cpu/lc8670/lc8670.cpp * src/devices/machine/68230pit.cpp * src/devices/machine/corvushd.cpp * src/devices/machine/ds1994.cpp * src/devices/machine/ticket.cpp * src/mame/audio/pinsnd88.cpp * src/mame/drivers/notetaker.cpp * src/mame/machine/asic65.cpp * src/mame/machine/rmnimbus.cpp * src/mame/machine/victor9k_fdc.cpp * src/mame/video/uv201.cpp - Made usage of m_member prefix consistent: * src/devices/bus/isa/hdc.cpp * src/devices/bus/isa/omti8621.cpp * src/devices/bus/vme/vme_fccpu20.cpp * src/devices/machine/ds1386.cpp * src/devices/machine/i7220.cpp - Spacing consistency pass: * src/devices/bus/isa/hdc.cpp * src/devices/bus/isa/omti8621.cpp * src/devices/bus/thomson/nanoresau.cpp * src/devices/bus/ti99/internal/992board.cpp * src/devices/bus/ti99/internal/genkbd.cpp * src/devices/bus/ti99/internal/joyport/handset.cpp * src/devices/bus/vme/vme_fccpu20.cpp * src/devices/cpu/i86/i186.cpp * src/devices/cpu/lc8670/lc8670.cpp * src/devices/machine/68230pit.cpp * src/devices/machine/cop452.cpp * src/devices/machine/corvushd.cpp * src/devices/machine/hp_dc100_tape.cpp * src/devices/machine/hp_taco.cpp * src/devices/machine/meters.cpp * src/devices/machine/microtch.cpp * src/devices/machine/phi.cpp * src/devices/video/ef9365.cpp * src/devices/video/v9938.cpp * src/mame/drivers/alphaskop41xx.cpp * src/mame/drivers/myb3k.cpp * src/mame/drivers/notetaker.cpp * src/mame/drivers/wpc_an.cpp * src/mame/machine/midikbd.cpp * src/mame/machine/rmnimbus.cpp * src/mame/machine/wpc_lamp.cpp * src/mame/machine/wpc_out.cpp - Removed string-based ioport lookups: * src/devices/bus/ti99/internal/joyport/handset.cpp * src/devices/bus/ti99/internal/joyport/mecmouse.cpp * src/devices/bus/vme/vme_hcpu30.cpp * src/mame/machine/k7659kb.cpp * src/mame/machine/ti85.cpp - Adjustments to grammar/wording in comments * src/devices/bus/sms_ctrl/lphaser.cpp * src/devices/bus/sms_ctrl/sports.cpp * src/devices/bus/snes/event.cpp * src/devices/bus/snes/sa1.cpp * src/devices/bus/thomson/nanoresau.cpp * src/devices/bus/z88/z88.cpp * src/devices/machine/ds1386.cpp * src/devices/machine/vic_pl192.cpp - Favored BIT() macro for single-bit checks * src/devices/bus/ti99/internal/992board.cpp * src/devices/bus/ti99/joyport/handset.cpp * src/mame/drivers/notetaker.cpp * src/mame/machine/wpc_lamp.cpp * src/mame/machine/wpc_out.cpp - Removed C89-style variable declarations when noticed * src/devices/bus/isa/hdc.cpp * src/devices/bus/sms_ctrl/lphaser.cpp * src/devices/bus/ti99/joyport/mecmouse.cpp * src/devices/machine/acorn_vidc.cpp * src/devices/sound/ymz280b.cpp * src/devices/video/vic4567.cpp - Removed FUNCNAME to avoid compiler-specific #define checks in devices * src/devices/bus/vme/vme_fccpu20.cpp * src/devices/bus/vme/vme_hcpu30.cpp * src/devices/machine/68230pit.cpp * src/devices/machine/mc14411.cpp * src/mame/drivers/myb3k.cpp - Removed unecessary member prefixes/suffixes * src/devices/video/ef9340_1.cpp * src/mame/drivers/fuukifg2.cpp * src/mame/drivers/fuukifg3.cpp * src/mame/drivers/intv.cpp * src/mame/drivers/simpsons.cpp * src/mame/drivers/socrates.cpp * src/mame/drivers/special_gambl.cpp * src/mame/drivers/sprint4.cpp * src/mame/drivers/ti990_10.cpp * src/mame/drivers/tubep.cpp * src/mame/drivers/vectrex.cpp * src/mame/drivers/wpc_an.cpp * src/mame/drivers/wpc_dot.cpp * src/mame/drivers/wpc_flip1.cpp * src/mame/drivers/wpc_flip2.cpp * src/mame/machine/z80ne.cpp * src/mame/video/rollerg.cpp - Switched to lower-case hex constants * src/devices/video/ef9365.cpp * src/mame/machine/rmnimbus.cpp - Re-ordered driver overrides and function members * src/mame/drivers/boxer.cpp * src/mame/drivers/eurocom2.cpp * src/mame/drivers/exidy.cpp * src/mame/drivers/gpworld.cpp * src/mame/drivers/h19.cpp * src/mame/drivers/ibmpcjr.cpp * src/mame/drivers/mekd5.cpp * src/mame/drivers/mgolf.cpp * src/mame/drivers/myb3k.cpp * src/mame/drivers/nightmare.cpp * src/mame/drivers/notetaker.cpp * src/mame/drivers/ptcsol.cpp * src/mame/drivers/pwrview.cpp * src/mame/drivers/rabbit.cpp * src/mame/drivers/sitcom.cpp * src/mame/drivers/socrates.cpp * src/mame/drivers/sprint4.cpp * src/mame/drivers/techno.cpp * src/mame/drivers/thayers.cpp * src/mame/drivers/ti990_10.cpp * src/mame/drivers/ti990_4.cpp * src/mame/drivers/tv912.cpp * src/mame/drivers/tv990.cpp * src/mame/drivers/uchroma68.cpp * src/mame/drivers/vk100.cpp * src/mame/drivers/votrhv.cpp * src/mame/drivers/wicat.cpp * src/mame/drivers/wpc_an.cpp * src/mame/includes/abc80.h * src/mame/includes/asterix.h * src/mame/includes/fuukifg2.h * src/mame/includes/fuukifg3.h * src/mame/includes/gunbustr.h * src/mame/includes/intv.h * src/mame/includes/namcona1.h * src/mame/includes/newbrain.h * src/mame/includes/poly.h * src/mame/includes/prof80.h * src/mame/includes/rollerg.h * src/mame/includes/s11.h * src/mame/includes/segahang.h * src/mame/includes/simpsons.h * src/mame/includes/spacefb.h * src/mame/includes/tandy2k.h * src/mame/includes/trucocl.h * src/mame/includes/tubebp.h * src/mame/includes/vidbrain.h * src/mame/includes/wolfpack.h * src/mame/includes/wpc_dot.h - Made capitalization consistent on class members * src/devices/machine/meters.cpp * src/mame/drivers/namcona1.cpp * src/mame/drivers/notetaker.cpp -src/devices/bus/isa/hdc.cpp: * Removed fixed-size std::vector in favor of std::unique_ptr -src/devices/bus/isa/s3virge.cpp: * Moved unusually large (for a header) functions into .cpp from header -src/devices/bus/vip/vp550.cpp * Switched to required_device_array to simplify code paths -src/devices/machine/arm_iomd.cpp * Added initializers to constructor * Favored std::size over fixed static sizes -src/devices/machine/ds1386.cpp * Moved register #defines into header enums -src/devices/machine/mc68901.cpp * Removed unnecessary parameters and emu_timer::enable calls -src/devices/machine/mccs1850.cpp * Removed inline overuse -src/devices/machine/meters.cpp * Removed unused members -src/devices/machine/mos6526.cpp * Removed inline overuse -src/devices/machine/nsc810.cpp * Converted to arrays rather than individually-numbered members -src/devices/machine/pxa255.cpp * Simplified DMA transfer code -src/devices/machine/saa1043.cpp * Removed extraneous members in favor of resolve_all_safe -src/devices/machine/vic_pl192.cpp * Shifted constructors, start-up, and maps to be at the top of the source file -src/devices/machine/z8536.cpp * Removed stray uses of device_timer_id -src/devices/sound/cdp1869.cpp * Removed inline overuse -src/devices/sound/mos7360.cpp * Converted to arrays rather than individually-numbered members -src/emu/device.cpp * Removed ID-based timer_alloc * Removed timer_set * Removed synchronize * Removed timer_expired * Added shorthand timer_alloc to avoid lengthy machine().scheduler().timer_alloc() calls -src/emu/schedule.cpp * Removed now-unused m_id and m_device members -src/mame/audio/alesis.cpp * Added initializers to constructor -src/mame/drivers/alto2.cpp * Removed custom-named driver init in favor of driver_init override * Removed octal constant in favor of more standard hex -src/mame/drivers/astinvad.cpp * Fixed 'kamizake' typo -src/mame/drivers/tm990189.cpp * Removed unnecessary machine reset override -src/mame/drivers/unichamp.cpp * Removed custom-named driver init in favor of driver_init override -src/mame/drivers/votrhv.cpp * Fixed ROM_LOAD macros and region() usage in memory maps -src/mame/machine/victor9k_fdc.cpp * Made bracing style consistent across the file -src/mame/video/gime.cpp * Removed unnecessary void specifiers in function prototypes
* Remove void *ptr parameter from emu_timer, timer_device and all related ↵ AJR2022-01-261-1/+1
| | | | callbacks
* devices/machine, sound and video: removed read and write macros (nw) Ivan Vangelista2020-06-171-4/+4
|
* devices/machine: simplified handlers for various devices (nw) Ivan Vangelista2020-03-241-16/+16
|
* scudsp, sega_scu, serflash, smartmed, smc91c9x, smioc, smpc : removed MCFG ↵ Ivan Vangelista2018-10-261-96/+19
| | | | macros (nw)
* devcb3 Vas Crabb2018-07-071-12/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are multiple issues with the current device callbacks: * They always dispatch through a pointer-to-member * Chained callbacks are a linked list so the branch unit can't predict the early * There's a runtime decision made on the left/right shift direction * There are runtime NULL checks on various objects * Binding a lambda isn't practical * Arbitrary transformations are not supported * When chaining callbacks it isn't clear what the MCFG_DEVCB_ modifiers apply to * It isn't possible to just append to a callback in derived configuration * The macros need a magic, hidden local called devcb * Moving code that uses the magic locals around is error-prone * Writing the MCFG_ macros to make a device usable is a pain * You can't discover applicable MCFG_ macros with intellisense * Macros are not scoped * Using an inappropriate macro isn't detected at compile time * Lots of other things This changeset overcomes the biggest obstacle to remving MCFG_ macros altogether. Essentially, to allow a devcb to be configured, call .bind() and expose the result (a bind target for the callback). Bind target methods starting with "set" repace the current callbacks; methods starting with "append" append to them. You can't reconfigure a callback after resolving it. There's no need to use a macro matching the handler signatures - use FUNC for everything. Current device is implied if no tag/finder is supplied (no need for explicit this). Lambdas are supported, and the memory space and offset are optional. These kinds of things work: * .read_cb().set([this] () { return something; }); * .read_cb().set([this] (offs_t offset) { return ~offset; }); * .write_cb().set([this] (offs_t offset, u8 data) { m_array[offset] = data; }); * .write_cb().set([this] (int state) { some_var = state; }); Arbitrary transforms are allowed, and they can modify offset/mask for example: * .read_cb().set(FUNC(my_state::handler)).transform([] (u8 data) { return bitswap<4>(data, 1, 3, 0, 2); }); * .read_cb().set(m_dev, FUNC(some_device::member)).transform([] (offs_t &offset, u8 data) { offset ^= 3; return data; }); It's possible to stack arbitrary transforms, at the cost of compile time (the whole transform stack gets inlined at compile time). Shifts count as an arbitrary transform, but mask/exor does not. Order of mask/shift/exor now matters. Modifications are applied in the specified order. These are NOT EQUIVALENT: * .read_cb().set(FUNC(my_state::handler)).mask(0x06).lshift(2); * .read_cb().set(FUNC(my_state::handler)).lshift(2).mask(0x06); The bit helper no longer reverses its behaviour for read callbacks, and I/O ports are no longer aware of the field mask. Binding a read callback to no-op is not supported - specify a constant. The GND and VCC aliases have been removed intentionally - they're TTL-centric, and were already being abused. Other quirks have been preserved, including write logger only logging when the data is non-zero (quite unhelpful in many of the cases where it's used). Legacy syntax is still supported for simple cases, but will be phased out. New devices should not have MCFG_ macros. I don't think I've missed any fundamental issues, but if I've broken something, let me know.
* Set finder tag relative to current device being configured rather than Vas Crabb2018-04-301-1/+1
| | | | | | | | | | | | | | the finder's owner. This meand you no longer need to care about the your relationship to the object being configured and a lot of ^ and : can disappear. There's a bit reduction in string pasting in macros from this. Yes, I have to make this apply to devcb etc. as well, but that's a job for another day. There's probably at least one thing broken by this where optional objects are involved. Most things can be solved by just getting rid of the now-problematic ^ and : prefixes.
* Remove first_screen from smpc, nw mooglyguy2018-03-101-4/+9
|
* destaticify initializations (nw) (#3289) wilbertpol2018-03-041-27/+70
| | | | | | * destaticify initializations (nw) * fix this->set_screen (nw)
* devices/machine: some private-ization (nw) Ivan Vangelista2018-02-151-15/+17
| | | | + removed some duplication
* API change: Memory maps are now methods of the owner class [O. Galibert] Olivier Galibert2018-02-121-1/+2
| | | | | Also, a lot more freedom happened, that's going to be more visible soon.
* srcclean (nw) Vas Crabb2017-10-221-13/+13
|
* Improve previous commit (nw) angelosa2017-10-061-2/+1
|
* smpc.cpp: simulate SETTIME bit behaviour if an invalid NVRAM data is found ↵ angelosa2017-10-051-2/+2
| | | | | | for Sega Saturn like original HW does. [Angelo Salese] * Now all Sega Saturn romsets calls the BIOS setup if NVRAM is uninitialized. This is intended behaviour and sets up proper defaults like Japanese language for saturnjp set.
* saturn.cpp: rewritten SMPC into a device [Angelo Salese] angelosa2017-10-051-29/+38
| | | | (out-of-whatsnew: added remaining devices, removed almost all trampolines, cleanups, merge implementations between ST-V and Saturn)
* smpc.cpp: execute commands internal to the device for ST-V (nw) angelosa2017-10-051-4/+48
|
* smpc.cpp: move IREG & OREG to internal device state (nw) angelosa2017-10-051-2/+9
|
* smpc.cpp: reset/halt/nmi lines delegation (nw) angelosa2017-10-051-10/+69
|
* saturn.cpp: SMPC device-ification part 1 (nw) angelosa2017-10-051-0/+109
|
* Move all devices into separate part of src tree (nw) Miodrag Milanovic2015-09-131-0/+7