diff options
Diffstat (limited to 'trunk/src/mame/drivers/gaelco3d.c')
-rw-r--r-- | trunk/src/mame/drivers/gaelco3d.c | 1261 |
1 files changed, 1261 insertions, 0 deletions
diff --git a/trunk/src/mame/drivers/gaelco3d.c b/trunk/src/mame/drivers/gaelco3d.c new file mode 100644 index 00000000000..7bcabea184c --- /dev/null +++ b/trunk/src/mame/drivers/gaelco3d.c @@ -0,0 +1,1261 @@ +/************************************************************************* + + Driver for Gaelco 3D games + + driver by Aaron Giles + + Games supported: + * Speed Up + * Surf Planet + * Radikal Bikers + + Known bugs: + * EEPROM interface not right + +*************************************************************************** + +PCB Layout -- Radikal Bikers +---------- + +Top board + +REF. 980311 +|----------------------------------------------------------------| +| RAB.6 RAB.14 PAL RAB.48* | +| RAB.12 RAB.19 | +| RAB.23* ADSP-2115 16MHz RAB.45* | +| | +| | +| RAB.24 RAB.32 TDA1543 | +| TL074 | +| RAB.8* RAB.15* RAB.25 RAB.33 | +| RAB.9* RAB.16* | +| RAB.26 RAB.34 | +| | +| RAB.10* RAB.17* RAB.27 RAB.35 TDA1543 | +| RAB.11* RAB.18* TL074 | +| | +| | +| | +|----------------------------------------------------------------| +Notes: + Contents of RAB.24 to RAB.27 = RAB.32 to RAB.35 + * - These ROMs are surface mounted + + +Bottom board + +REF. 980512 +|----------------------------------------------------------------| +| ALTERA TMS320C31 50MHz | +|50MHz EPM7064 68EC020 CY7C199 (QFP132) | +| CY7C199 | +| CY7C199 KM4216C256 | +|93C66 CY7C199 | +| CY7C199 |--------| | +| CY7C199 |3D-3G | | +|75LBC176 |(QFP206)| | +|75LBC176 | | | +| |------------| |--------| | +| |CHIP EXPRESS| | +| |RASTER | 45MHz | +| |M1178-01 | | +| |M032541-4 | | +| CY7C199 |------------| | +| CY7C199 | +| CY7C199 | +| CY7C199 | +| KM4216C256 KM4216C256 | +| |------------| | +| |CHIP EXPRESS| KM4216C256 KM4216C256 PAL | +| |CHK1 | | +| |M1105-01 | KM4216C256 | +| |M048494-22 | | +| |------------| | +|----------------------------------------------------------------| + + +PCB Layout -- Surf Planet +---------- + +Top board + +REF. 971223 +|----------------------------------------------------------------| +| PLS.5 PLS.11 PAL PLS.37* | +| PLS.8 PLS.13 | +| PLS.18* ADSP-2115 16MHz PLS.40* | +| | +| | +| PLS.19 PLS.27 TDA1543 | +| TL074 | +| PLS.20 PLS.28 | +| | +| PLS.21 PLS.29 | +| | +| PLS.7* PLS.12* PLS.22 PLS.30 TDA1543 | +| PLS.9* PLS.15* TL074 | +| | +| TLC549 | +| LM358 | +|----------------------------------------------------------------| +Notes: + Contents of PLS.19 to PLS.22 = PLS.27 to PLS.30 + * - These ROMs are surface mounted + + +Bottom board + +REF. 970429 +|----------------------------------------------------------------| +| PAL 60MHz TMS320C31 | +| 68HC000 CY7C199 (QFP132) | +| CY7C199 | +| CY7C199 KM4216C256 | +|93C66 CY7C199 | +| CY7C199 |--------| | +| CY7C199 |3D-3G | | +|75LBC176 |(QFP206)| | +|75LBC176 | | | +| |------------| |--------| | +| |CHIP EXPRESS| | +| |RASTER | 45MHz | +| |M027851-1 | | +| |9706 CI USA | | +| CY7C199 |------------| | +| CY7C199 | +| CY7C199 | +| CY7C199 | +| KM4216C256 KM4216C256 | +| |------------| | +| |CHIP EXPRESS| KM4216C256 KM4216C256 PAL | +| |SU3DCOL | | +| |M026402-3 | KM4216C256 | +| |9647 CI USA | | +| |------------| | +|----------------------------------------------------------------| + + +6 * KM4216C256G = 6 * 256k x 16 +10 * CY7C199 = 10 * 32k x 8 + + +**************************************************************************/ + +#include "emu.h" +#include "cpu/m68000/m68000.h" +#include "includes/gaelco3d.h" +#include "cpu/tms32031/tms32031.h" +#include "cpu/adsp2100/adsp2100.h" +#include "machine/eeprom.h" +#include "machine/gaelco3d.h" +#include "sound/dmadac.h" + +#define LOG 0 + + + + + +static void adsp_tx_callback(adsp21xx_device &device, int port, INT32 data); + +static WRITE_LINE_DEVICE_HANDLER( ser_irq ) +{ + if (state) + cputag_set_input_line(device->machine(), "maincpu", 6, ASSERT_LINE); + else + cputag_set_input_line(device->machine(), "maincpu", 6, CLEAR_LINE); +} + + +static const gaelco_serial_interface serial_interface = +{ + DEVCB_LINE( ser_irq ) +}; + + + + +/************************************* + * + * Machine init + * + *************************************/ + +static MACHINE_START( gaelco3d ) +{ + gaelco3d_state *state = machine.driver_data<gaelco3d_state>(); + /* Save state support */ + state_save_register_global(machine, state->m_sound_data); + state_save_register_global(machine, state->m_sound_status); + state_save_register_global_array(machine, state->m_analog_ports); + state_save_register_global(machine, state->m_framenum); + state_save_register_global(machine, state->m_adsp_ireg); + state_save_register_global(machine, state->m_adsp_ireg_base); + state_save_register_global(machine, state->m_adsp_incs); + state_save_register_global(machine, state->m_adsp_size); +} + + +static MACHINE_RESET( common ) +{ + gaelco3d_state *state = machine.driver_data<gaelco3d_state>(); + UINT16 *src; + int i; + + state->m_framenum = 0; + + /* boot the ADSP chip */ + src = (UINT16 *)machine.region("user1")->base(); + for (i = 0; i < (src[3] & 0xff) * 8; i++) + { + UINT32 opcode = ((src[i*4+0] & 0xff) << 16) | ((src[i*4+1] & 0xff) << 8) | (src[i*4+2] & 0xff); + state->m_adsp_ram_base[i] = opcode; + } + + /* allocate a timer for feeding the autobuffer */ + state->m_adsp_autobuffer_timer = machine.device<timer_device>("adsp_timer"); + + memory_configure_bank(machine, "bank1", 0, 256, machine.region("user1")->base(), 0x4000); + memory_set_bank(machine, "bank1", 0); + + /* keep the TMS32031 halted until the code is ready to go */ + cputag_set_input_line(machine, "tms", INPUT_LINE_RESET, ASSERT_LINE); + + for (i = 0; i < SOUND_CHANNELS; i++) + { + char buffer[10]; + sprintf(buffer, "dac%d", i + 1); + state->m_dmadac[i] = machine.device<dmadac_sound_device>(buffer); + } +} + + +static MACHINE_RESET( gaelco3d ) +{ + gaelco3d_state *state = machine.driver_data<gaelco3d_state>(); + MACHINE_RESET_CALL( common ); + state->m_tms_offset_xor = 0; +} + + +static MACHINE_RESET( gaelco3d2 ) +{ + gaelco3d_state *state = machine.driver_data<gaelco3d_state>(); + MACHINE_RESET_CALL( common ); + state->m_tms_offset_xor = BYTE_XOR_BE(0); +} + + + +/************************************* + * + * IRQ handling + * + *************************************/ + +static INTERRUPT_GEN( vblank_gen ) +{ + gaelco3d_render(*device->machine().primary_screen); + device_set_input_line(device, 2, ASSERT_LINE); +} + + +static WRITE16_HANDLER( irq_ack_w ) +{ + cputag_set_input_line(space->machine(), "maincpu", 2, CLEAR_LINE); +} + +static WRITE32_HANDLER( irq_ack32_w ) +{ + if (mem_mask == 0xffff0000) + irq_ack_w(space, offset, data, mem_mask >> 16); + else if (ACCESSING_BITS_0_7) + gaelco_serial_tr_w(space->machine().device("serial"), 0, data & 0x01); + else + logerror("%06X:irq_ack_w(%02X) = %08X & %08X\n", cpu_get_pc(&space->device()), offset, data, mem_mask); +} + + +/************************************* + * + * EEPROM (93C66B) + * Serial Interface + * + *************************************/ + +static READ16_DEVICE_HANDLER( eeprom_data_r ) +{ + UINT32 result = 0xffff; + + if (ACCESSING_BITS_0_7) + { + /* bit 0 is clock */ + /* bit 1 active */ + result &= ~GAELCOSER_EXT_STATUS_MASK; + result |= gaelco_serial_status_r(device->machine().device("serial"), 0); + } + + eeprom_device *eeprom = downcast<eeprom_device *>(device); + if (eeprom->read_bit()) + result ^= 0x0004; + if (LOG) + logerror("eeprom_data_r(%02X)\n", result); + return result; +} + +static READ32_DEVICE_HANDLER( eeprom_data32_r ) +{ + if (ACCESSING_BITS_16_31) + return (eeprom_data_r(device, 0, mem_mask >> 16) << 16) | 0xffff; + else if (ACCESSING_BITS_0_7) + { + UINT8 data = gaelco_serial_data_r(device->machine().device("serial"),0); + if (LOG) + logerror("%06X:read(%02X) = %08X & %08X\n", cpu_get_pc(device->machine().device("maincpu")), offset, data, mem_mask); + return data | 0xffffff00; + } + else + logerror("%06X:read(%02X) = mask %08X\n", cpu_get_pc(device->machine().device("maincpu")), offset, mem_mask); + + return 0xffffffff; +} + + +static WRITE16_DEVICE_HANDLER( eeprom_data_w ) +{ + if (ACCESSING_BITS_0_7) + { + eeprom_device *eeprom = downcast<eeprom_device *>(device); + eeprom->write_bit(data & 0x01); + } + else if (mem_mask != 0xffff) + logerror("write mask: %08x data %08x\n", mem_mask, data); +} + + +static WRITE16_DEVICE_HANDLER( eeprom_clock_w ) +{ + if (ACCESSING_BITS_0_7) + { + eeprom_device *eeprom = downcast<eeprom_device *>(device); + eeprom->set_clock_line((data & 0x01) ? ASSERT_LINE : CLEAR_LINE); + } +} + + +static WRITE16_DEVICE_HANDLER( eeprom_cs_w ) +{ + if (ACCESSING_BITS_0_7) + { + eeprom_device *eeprom = downcast<eeprom_device *>(device); + eeprom->set_cs_line((data & 0x01) ? CLEAR_LINE : ASSERT_LINE); + } +} + + + +/************************************* + * + * Sound CPU comms + * + *************************************/ + +static TIMER_CALLBACK( delayed_sound_w ) +{ + gaelco3d_state *state = machine.driver_data<gaelco3d_state>(); + if (LOG) + logerror("delayed_sound_w(%02X)\n", param); + state->m_sound_data = param; + cputag_set_input_line(machine, "adsp", ADSP2115_IRQ2, ASSERT_LINE); +} + + +static WRITE16_HANDLER( sound_data_w ) +{ + if (LOG) + logerror("%06X:sound_data_w(%02X) = %08X & %08X\n", cpu_get_pc(&space->device()), offset, data, mem_mask); + if (ACCESSING_BITS_0_7) + space->machine().scheduler().synchronize(FUNC(delayed_sound_w), data & 0xff); +} + + +static READ16_HANDLER( sound_data_r ) +{ + gaelco3d_state *state = space->machine().driver_data<gaelco3d_state>(); + if (LOG) + logerror("sound_data_r(%02X)\n", state->m_sound_data); + cputag_set_input_line(space->machine(), "adsp", ADSP2115_IRQ2, CLEAR_LINE); + return state->m_sound_data; +} + + +static READ16_HANDLER( sound_status_r ) +{ + gaelco3d_state *state = space->machine().driver_data<gaelco3d_state>(); + if (LOG) + logerror("%06X:sound_status_r(%02X) = %02X\n", cpu_get_pc(&space->device()), offset, state->m_sound_status); + if (ACCESSING_BITS_0_7) + return state->m_sound_status; + return 0xffff; +} + + +static WRITE16_HANDLER( sound_status_w ) +{ + gaelco3d_state *state = space->machine().driver_data<gaelco3d_state>(); + if (LOG) + logerror("sound_status_w(%02X)\n", state->m_sound_data); + state->m_sound_status = data; +} + + + +/************************************* + * + * Input ports + * + *************************************/ + +static CUSTOM_INPUT( analog_bit_r ) +{ + gaelco3d_state *state = field.machine().driver_data<gaelco3d_state>(); + int which = (FPTR)param; + return (state->m_analog_ports[which] >> 7) & 0x01; +} + + +static WRITE16_HANDLER( analog_port_clock_w ) +{ + gaelco3d_state *state = space->machine().driver_data<gaelco3d_state>(); + /* a zero/one combo is written here to clock the next analog port bit */ + if (ACCESSING_BITS_0_7) + { + if (!(data & 0xff)) + { + state->m_analog_ports[0] <<= 1; + state->m_analog_ports[1] <<= 1; + state->m_analog_ports[2] <<= 1; + state->m_analog_ports[3] <<= 1; + } + } + else + { + if (LOG) + logerror("%06X:analog_port_clock_w(%02X) = %08X & %08X\n", cpu_get_pc(&space->device()), offset, data, mem_mask); + } +} + + +static WRITE16_HANDLER( analog_port_latch_w ) +{ + gaelco3d_state *state = space->machine().driver_data<gaelco3d_state>(); + /* a zero is written here to read the analog ports, and a one is written when finished */ + if (ACCESSING_BITS_0_7) + { + if (!(data & 0xff)) + { + state->m_analog_ports[0] = input_port_read_safe(space->machine(), "ANALOG0", 0); + state->m_analog_ports[1] = input_port_read_safe(space->machine(), "ANALOG1", 0); + state->m_analog_ports[2] = input_port_read_safe(space->machine(), "ANALOG2", 0); + state->m_analog_ports[3] = input_port_read_safe(space->machine(), "ANALOG3", 0); + } + } + else + { + if (LOG) + logerror("%06X:analog_port_latch_w(%02X) = %08X & %08X\n", cpu_get_pc(&space->device()), offset, data, mem_mask); + } + +} + + + +/************************************* + * + * TMS32031 interface + * + *************************************/ + +static READ32_HANDLER( tms_m68k_ram_r ) +{ + gaelco3d_state *state = space->machine().driver_data<gaelco3d_state>(); +// logerror("%06X:tms_m68k_ram_r(%04X) = %08X\n", cpu_get_pc(&space->device()), offset, !(offset & 1) ? ((INT32)state->m_m68k_ram_base[offset/2] >> 16) : (int)(INT16)state->m_m68k_ram_base[offset/2]); + return (INT32)(INT16)state->m_m68k_ram_base[offset ^ state->m_tms_offset_xor]; +} + + +static WRITE32_HANDLER( tms_m68k_ram_w ) +{ + gaelco3d_state *state = space->machine().driver_data<gaelco3d_state>(); + state->m_m68k_ram_base[offset ^ state->m_tms_offset_xor] = data; +} + + +static void iack_w(tms3203x_device &device, UINT8 state, offs_t addr) +{ + if (LOG) + logerror("iack_w(%d) - %06X\n", state, addr); + device.set_input_line(0, CLEAR_LINE); +} + + + +/************************************* + * + * TMS32031 control + * + *************************************/ + +static WRITE16_HANDLER( tms_reset_w ) +{ + /* this is set to 0 while data is uploaded, then set to $ffff after it is done */ + /* it does not ever appear to be touched after that */ + if (LOG) + logerror("%06X:tms_reset_w(%02X) = %08X & %08X\n", cpu_get_pc(&space->device()), offset, data, mem_mask); + cputag_set_input_line(space->machine(), "tms", INPUT_LINE_RESET, (data == 0xffff) ? CLEAR_LINE : ASSERT_LINE); +} + + +static WRITE16_HANDLER( tms_irq_w ) +{ + /* this is written twice, 0,1, in quick succession */ + /* done after uploading, and after modifying the comm area */ + if (LOG) + logerror("%06X:tms_irq_w(%02X) = %08X & %08X\n", cpu_get_pc(&space->device()), offset, data, mem_mask); + if (ACCESSING_BITS_0_7) + cputag_set_input_line(space->machine(), "tms", 0, (data & 0x01) ? CLEAR_LINE : ASSERT_LINE); +} + + +static WRITE16_HANDLER( tms_control3_w ) +{ + if (LOG) + logerror("%06X:tms_control3_w(%02X) = %08X & %08X\n", cpu_get_pc(&space->device()), offset, data, mem_mask); +} + + +static WRITE16_HANDLER( tms_comm_w ) +{ + gaelco3d_state *state = space->machine().driver_data<gaelco3d_state>(); + COMBINE_DATA(&state->m_tms_comm_base[offset ^ state->m_tms_offset_xor]); + if (LOG) + logerror("%06X:tms_comm_w(%02X) = %08X & %08X\n", cpu_get_pc(&space->device()), offset*2, data, mem_mask); +} + + + +/************************************* + * + * ADSP control registers + * + *************************************/ + +/* These are the some of the control register, we dont use them all */ +enum +{ + S1_AUTOBUF_REG = 15, + S1_RFSDIV_REG, + S1_SCLKDIV_REG, + S1_CONTROL_REG, + S0_AUTOBUF_REG, + S0_RFSDIV_REG, + S0_SCLKDIV_REG, + S0_CONTROL_REG, + S0_MCTXLO_REG, + S0_MCTXHI_REG, + S0_MCRXLO_REG, + S0_MCRXHI_REG, + TIMER_SCALE_REG, + TIMER_COUNT_REG, + TIMER_PERIOD_REG, + WAITSTATES_REG, + SYSCONTROL_REG +}; + +/* +ADSP control 3FFF W = 0008 (SYSCONTROL_REG) +ADSP control 3FFE W = 1249 (WAITSTATES_REG) +ADSP control 3FEF W = 0D82 (S1_AUTOBUF_REG) +ADSP control 3FF1 W = 0005 (S1_SCLKDIV_REG) +ADSP control 3FF2 W = 4A0F (S1_CONTROL_REG) +ADSP control 3FFF W = 0C08 (SYSCONTROL_REG) +*/ + +static WRITE16_HANDLER( adsp_control_w ) +{ + gaelco3d_state *state = space->machine().driver_data<gaelco3d_state>(); + if (LOG) + logerror("ADSP control %04X W = %04X\n", 0x3fe0 + offset, data); + + state->m_adsp_control_regs[offset] = data; + switch (offset) + { + case SYSCONTROL_REG: + /* see if SPORT1 got disabled */ + if ((data & 0x0800) == 0) + { + dmadac_enable(&state->m_dmadac[0], SOUND_CHANNELS, 0); + state->m_adsp_autobuffer_timer->reset(); + } + break; + + case S1_AUTOBUF_REG: + /* autobuffer off: nuke the timer, and disable the DAC */ + if ((data & 0x0002) == 0) + { + dmadac_enable(&state->m_dmadac[0], SOUND_CHANNELS, 0); + state->m_adsp_autobuffer_timer->reset(); + } + break; + + case S1_CONTROL_REG: + if (((data >> 4) & 3) == 2) + logerror("Oh no!, the data is compresed with u-law encoding\n"); + if (((data >> 4) & 3) == 3) + logerror("Oh no!, the data is compresed with A-law encoding\n"); + break; + } +} + + +static WRITE16_HANDLER( adsp_rombank_w ) +{ + if (LOG) + logerror("adsp_rombank_w(%d) = %04X\n", offset, data); + memory_set_bank(space->machine(), "bank1", (offset & 1) * 0x80 + (data & 0x7f)); +} + + + +/************************************* + * + * ADSP sound generation + * + *************************************/ + +static TIMER_DEVICE_CALLBACK( adsp_autobuffer_irq ) +{ + gaelco3d_state *state = timer.machine().driver_data<gaelco3d_state>(); + cpu_device *adsp = timer.machine().device<cpu_device>("adsp"); + + /* get the index register */ + int reg = adsp->state(ADSP2100_I0 + state->m_adsp_ireg); + + /* copy the current data into the buffer */ +// logerror("ADSP buffer: I%d=%04X incs=%04X size=%04X\n", state->m_adsp_ireg, reg, state->m_adsp_incs, state->m_adsp_size); + if (state->m_adsp_incs) + dmadac_transfer(&state->m_dmadac[0], SOUND_CHANNELS, state->m_adsp_incs, SOUND_CHANNELS * state->m_adsp_incs, state->m_adsp_size / (SOUND_CHANNELS * state->m_adsp_incs), (INT16 *)&state->m_adsp_fastram_base[reg - 0x3800]); + + /* increment it */ + reg += state->m_adsp_size; + + /* check for wrapping */ + if (reg >= state->m_adsp_ireg_base + state->m_adsp_size) + { + /* reset the base pointer */ + reg = state->m_adsp_ireg_base; + + /* generate the (internal, thats why the pulse) irq */ + generic_pulse_irq_line(adsp, ADSP2105_IRQ1); + } + + /* store it */ + adsp->set_state(ADSP2100_I0 + state->m_adsp_ireg, reg); +} + + +static void adsp_tx_callback(adsp21xx_device &device, int port, INT32 data) +{ + gaelco3d_state *state = device.machine().driver_data<gaelco3d_state>(); + /* check if it's for SPORT1 */ + if (port != 1) + return; + + /* check if SPORT1 is enabled */ + if (state->m_adsp_control_regs[SYSCONTROL_REG] & 0x0800) /* bit 11 */ + { + /* we only support autobuffer here (wich is what this thing uses), bail if not enabled */ + if (state->m_adsp_control_regs[S1_AUTOBUF_REG] & 0x0002) /* bit 1 */ + { + /* get the autobuffer registers */ + int mreg, lreg; + UINT16 source; + attotime sample_period; + + state->m_adsp_ireg = (state->m_adsp_control_regs[S1_AUTOBUF_REG] >> 9) & 7; + mreg = (state->m_adsp_control_regs[S1_AUTOBUF_REG] >> 7) & 3; + mreg |= state->m_adsp_ireg & 0x04; /* msb comes from ireg */ + lreg = state->m_adsp_ireg; + + /* now get the register contents in a more legible format */ + /* we depend on register indexes to be continuous (wich is the case in our core) */ + source = device.state(ADSP2100_I0 + state->m_adsp_ireg); + state->m_adsp_incs = device.state(ADSP2100_M0 + mreg); + state->m_adsp_size = device.state(ADSP2100_L0 + lreg); + + /* get the base value, since we need to keep it around for wrapping */ + source -= state->m_adsp_incs; + + /* make it go back one so we dont lose the first sample */ + device.set_state(ADSP2100_I0 + state->m_adsp_ireg, source); + + /* save it as it is now */ + state->m_adsp_ireg_base = source; + + /* calculate how long until we generate an interrupt */ + + /* period per each bit sent */ + sample_period = attotime::from_hz(device.clock()) * (2 * (state->m_adsp_control_regs[S1_SCLKDIV_REG] + 1)); + + /* now put it down to samples, so we know what the channel frequency has to be */ + sample_period *= 16 * SOUND_CHANNELS; + + dmadac_set_frequency(&state->m_dmadac[0], SOUND_CHANNELS, ATTOSECONDS_TO_HZ(sample_period.attoseconds)); + dmadac_enable(&state->m_dmadac[0], SOUND_CHANNELS, 1); + + /* fire off a timer wich will hit every half-buffer */ + sample_period = (sample_period * state->m_adsp_size) / (SOUND_CHANNELS * state->m_adsp_incs); + + state->m_adsp_autobuffer_timer->adjust(sample_period, 0, sample_period); + + return; + } + else + logerror( "ADSP SPORT1: trying to transmit and autobuffer not enabled!\n" ); + } + + /* if we get there, something went wrong. Disable playing */ + dmadac_enable(&state->m_dmadac[0], SOUND_CHANNELS, 0); + + /* remove timer */ + state->m_adsp_autobuffer_timer->reset(); +} + + + +/************************************* + * + * Unknown accesses + * + *************************************/ + + +static WRITE32_HANDLER( radikalb_lamp_w ) +{ + /* arbitrary data written */ + if (ACCESSING_BITS_0_7) + logerror("%06X:unknown_127_w = %02X\n", cpu_get_pc(&space->device()), data & 0xff); + else + logerror("%06X:unknown_127_w(%02X) = %08X & %08X\n", cpu_get_pc(&space->device()), offset, data, mem_mask); +} + +static WRITE32_HANDLER( unknown_137_w ) +{ + /* only written $00 or $ff */ + if (ACCESSING_BITS_0_7) + logerror("%06X:unknown_137_w = %02X\n", cpu_get_pc(&space->device()), data & 0xff); + else + logerror("%06X:unknown_137_w(%02X) = %08X & %08X\n", cpu_get_pc(&space->device()), offset, data, mem_mask); +} + +static WRITE32_HANDLER( unknown_13a_w ) +{ + /* only written $0000 or $0001 */ + if (ACCESSING_BITS_0_15) + logerror("%06X:unknown_13a_w = %04X\n", cpu_get_pc(&space->device()), data & 0xffff); + else + logerror("%06X:unknown_13a_w(%02X) = %08X & %08X\n", cpu_get_pc(&space->device()), offset, data, mem_mask); +} + + + +/************************************* + * + * Memory maps + * + *************************************/ + +static ADDRESS_MAP_START( main_map, AS_PROGRAM, 16 ) + ADDRESS_MAP_UNMAP_HIGH + AM_RANGE(0x000000, 0x1fffff) AM_ROM + AM_RANGE(0x400000, 0x40ffff) AM_RAM_WRITE(gaelco3d_paletteram_w) AM_BASE_GENERIC(paletteram) + AM_RANGE(0x51000c, 0x51000d) AM_READ_PORT("IN0") + AM_RANGE(0x51001c, 0x51001d) AM_READ_PORT("IN1") + AM_RANGE(0x51002c, 0x51002d) AM_READ_PORT("IN2") + AM_RANGE(0x51003c, 0x51003d) AM_READ_PORT("IN3") + AM_RANGE(0x510040, 0x510041) AM_WRITE(sound_data_w) + AM_RANGE(0x510042, 0x510043) AM_READ(sound_status_r) + AM_RANGE(0x510100, 0x510101) AM_DEVREAD("eeprom", eeprom_data_r) + AM_RANGE(0x510100, 0x510101) AM_WRITE(irq_ack_w) + AM_RANGE(0x510102, 0x510103) AM_DEVWRITE8("serial", gaelco_serial_tr_w, 0x00ff) + AM_RANGE(0x510102, 0x510103) AM_DEVREAD8("serial", gaelco_serial_data_r, 0x00ff) + AM_RANGE(0x510104, 0x510105) AM_DEVWRITE8("serial", gaelco_serial_data_w, 0x00ff) + AM_RANGE(0x51010a, 0x51010b) AM_DEVWRITE8("serial", gaelco_serial_rts_w, 0x00ff) + AM_RANGE(0x510110, 0x510113) AM_DEVWRITE("eeprom", eeprom_data_w) + AM_RANGE(0x510116, 0x510117) AM_WRITE(tms_control3_w) + AM_RANGE(0x510118, 0x51011b) AM_DEVWRITE("eeprom", eeprom_clock_w) + AM_RANGE(0x510120, 0x510123) AM_DEVWRITE("eeprom", eeprom_cs_w) + AM_RANGE(0x51012a, 0x51012b) AM_WRITE(tms_reset_w) + AM_RANGE(0x510132, 0x510133) AM_WRITE(tms_irq_w) + AM_RANGE(0x510146, 0x510147) AM_DEVWRITE8("serial", gaelco_serial_irq_enable, 0x00ff) + AM_RANGE(0x510156, 0x510157) AM_WRITE(analog_port_clock_w) + AM_RANGE(0x510166, 0x510167) AM_WRITE(analog_port_latch_w) + AM_RANGE(0x510176, 0x510177) AM_DEVWRITE8("serial", gaelco_serial_unknown_w, 0x00ff) + AM_RANGE(0xfe7f80, 0xfe7fff) AM_WRITE(tms_comm_w) AM_BASE_MEMBER(gaelco3d_state, m_tms_comm_base) + AM_RANGE(0xfe0000, 0xfeffff) AM_RAM AM_BASE_MEMBER(gaelco3d_state, m_m68k_ram_base) +ADDRESS_MAP_END + + +static ADDRESS_MAP_START( main020_map, AS_PROGRAM, 32 ) + AM_RANGE(0x000000, 0x1fffff) AM_ROM + AM_RANGE(0x400000, 0x40ffff) AM_RAM_WRITE(gaelco3d_paletteram_020_w) AM_BASE_GENERIC(paletteram) + AM_RANGE(0x51000c, 0x51000f) AM_READ_PORT("IN0") + AM_RANGE(0x51001c, 0x51001f) AM_READ_PORT("IN1") + AM_RANGE(0x51002c, 0x51002f) AM_READ_PORT("IN2") + AM_RANGE(0x51003c, 0x51003f) AM_READ_PORT("IN3") + AM_RANGE(0x510040, 0x510043) AM_READ16(sound_status_r, 0x0000ffff) + AM_RANGE(0x510040, 0x510043) AM_WRITE16(sound_data_w, 0xffff0000) + AM_RANGE(0x510100, 0x510103) AM_DEVREAD("eeprom", eeprom_data32_r) + AM_RANGE(0x510100, 0x510103) AM_WRITE(irq_ack32_w) + AM_RANGE(0x510104, 0x510107) AM_DEVWRITE8("serial", gaelco_serial_data_w, 0x00ff0000) + AM_RANGE(0x510108, 0x51010b) AM_DEVWRITE8("serial", gaelco_serial_rts_w, 0x000000ff) + AM_RANGE(0x510110, 0x510113) AM_DEVWRITE16("eeprom", eeprom_data_w, 0x0000ffff) + AM_RANGE(0x510114, 0x510117) AM_WRITE16(tms_control3_w, 0x0000ffff) + AM_RANGE(0x510118, 0x51011b) AM_DEVWRITE16("eeprom", eeprom_clock_w, 0x0000ffff) + AM_RANGE(0x510120, 0x510123) AM_DEVWRITE16("eeprom", eeprom_cs_w, 0x0000ffff) + AM_RANGE(0x510124, 0x510127) AM_WRITE(radikalb_lamp_w) + AM_RANGE(0x510128, 0x51012b) AM_WRITE16(tms_reset_w, 0x0000ffff) + AM_RANGE(0x510130, 0x510133) AM_WRITE16(tms_irq_w, 0x0000ffff) + AM_RANGE(0x510134, 0x510137) AM_WRITE(unknown_137_w) + AM_RANGE(0x510138, 0x51013b) AM_WRITE(unknown_13a_w) + AM_RANGE(0x510144, 0x510147) AM_DEVWRITE8("serial", gaelco_serial_irq_enable, 0x000000ff) + AM_RANGE(0x510154, 0x510157) AM_WRITE16(analog_port_clock_w, 0x0000ffff) + AM_RANGE(0x510164, 0x510167) AM_WRITE16(analog_port_latch_w, 0x0000ffff) + AM_RANGE(0x510174, 0x510177) AM_DEVWRITE8("serial", gaelco_serial_unknown_w, 0x000000ff) + AM_RANGE(0xfe7f80, 0xfe7fff) AM_WRITE16(tms_comm_w, 0xffffffff) AM_BASE_MEMBER(gaelco3d_state, m_tms_comm_base) + AM_RANGE(0xfe0000, 0xfeffff) AM_RAM AM_BASE_MEMBER(gaelco3d_state, m_m68k_ram_base) +ADDRESS_MAP_END + +static ADDRESS_MAP_START( tms_map, AS_PROGRAM, 32 ) + AM_RANGE(0x000000, 0x007fff) AM_READWRITE(tms_m68k_ram_r, tms_m68k_ram_w) + AM_RANGE(0x400000, 0x5fffff) AM_ROM AM_REGION("user2", 0) + AM_RANGE(0xc00000, 0xc00007) AM_WRITE(gaelco3d_render_w) +ADDRESS_MAP_END + + +static ADDRESS_MAP_START( adsp_program_map, AS_PROGRAM, 32 ) + AM_RANGE(0x0000, 0x03ff) AM_RAM AM_BASE_MEMBER(gaelco3d_state, m_adsp_ram_base) /* 1k words internal RAM */ + AM_RANGE(0x37ff, 0x37ff) AM_READNOP /* speedup hammers this for no apparent reason */ +ADDRESS_MAP_END + +static ADDRESS_MAP_START( adsp_data_map, AS_DATA, 16 ) + AM_RANGE(0x0000, 0x0001) AM_WRITE(adsp_rombank_w) + AM_RANGE(0x0000, 0x1fff) AM_ROMBANK("bank1") + AM_RANGE(0x2000, 0x2000) AM_READWRITE(sound_data_r, sound_status_w) + AM_RANGE(0x3800, 0x39ff) AM_RAM AM_BASE_MEMBER(gaelco3d_state, m_adsp_fastram_base) /* 512 words internal RAM */ + AM_RANGE(0x3fe0, 0x3fff) AM_WRITE(adsp_control_w) AM_BASE_MEMBER(gaelco3d_state, m_adsp_control_regs) +ADDRESS_MAP_END + + + +/************************************* + * + * Input ports + * + *************************************/ + +static INPUT_PORTS_START( speedup ) + PORT_START("IN0") + PORT_BIT( 0x0001, IP_ACTIVE_LOW, IPT_VOLUME_UP ) + PORT_BIT( 0x0002, IP_ACTIVE_LOW, IPT_VOLUME_DOWN ) + PORT_BIT( 0x0004, IP_ACTIVE_LOW, IPT_BUTTON5 ) + PORT_BIT( 0x0008, IP_ACTIVE_LOW, IPT_BUTTON4 ) + PORT_BIT( 0x0010, IP_ACTIVE_LOW, IPT_BUTTON3 ) PORT_CODE(KEYCODE_LSHIFT) // view + PORT_BIT( 0x0020, IP_ACTIVE_LOW, IPT_BUTTON1 ) PORT_CODE(KEYCODE_LALT) // brake + PORT_BIT( 0x0040, IP_ACTIVE_LOW, IPT_BUTTON2 ) PORT_CODE(KEYCODE_SPACE) PORT_TOGGLE // gear (low=1 high=2) + PORT_BIT( 0x0080, IP_ACTIVE_LOW, IPT_START1 ) // start + PORT_BIT( 0xff00, IP_ACTIVE_LOW, IPT_UNKNOWN ) + + PORT_START("IN1") + PORT_BIT( 0xffff, IP_ACTIVE_LOW, IPT_UNKNOWN ) + + PORT_START("IN2") + PORT_BIT( 0x00ff, IP_ACTIVE_LOW, IPT_UNKNOWN ) + PORT_BIT( 0x0100, IP_ACTIVE_LOW, IPT_COIN1 ) // verified + PORT_BIT( 0x0200, IP_ACTIVE_LOW, IPT_BUTTON2 ) PORT_PLAYER(2) // checked after reading analog from port 1 + PORT_BIT( 0x0400, IP_ACTIVE_LOW, IPT_BUTTON3 ) PORT_PLAYER(2) // checked after reading analog from port 2 + PORT_BIT( 0x0800, IP_ACTIVE_LOW, IPT_BUTTON4 ) PORT_PLAYER(2) // checked after reading analog from port 3 + PORT_BIT( 0x1000, IP_ACTIVE_HIGH, IPT_SPECIAL) PORT_CUSTOM(analog_bit_r, (void *)0) + PORT_BIT( 0x2000, IP_ACTIVE_HIGH, IPT_SPECIAL) PORT_CUSTOM(analog_bit_r, (void *)1) + PORT_BIT( 0x4000, IP_ACTIVE_HIGH, IPT_SPECIAL) PORT_CUSTOM(analog_bit_r, (void *)2) + PORT_BIT( 0x8000, IP_ACTIVE_HIGH, IPT_SPECIAL) PORT_CUSTOM(analog_bit_r, (void *)3) + + PORT_START("IN3") + PORT_BIT( 0x0100, IP_ACTIVE_LOW, IPT_COIN2 ) // verified + PORT_SERVICE_NO_TOGGLE( 0x0200, IP_ACTIVE_LOW ) // verified + PORT_BIT( 0xfc00, IP_ACTIVE_LOW, IPT_UNKNOWN ) + + PORT_START("ANALOG0") + PORT_BIT( 0xff, 0x80, IPT_PADDLE ) PORT_MINMAX(0x10,0xf0) PORT_SENSITIVITY(25) PORT_KEYDELTA(25) + + PORT_START("ANALOG1") + PORT_BIT( 0xff, 0x00, IPT_PEDAL ) PORT_SENSITIVITY(25) PORT_KEYDELTA(20) +INPUT_PORTS_END + + +static INPUT_PORTS_START( surfplnt ) + PORT_START("IN0") + PORT_BIT( 0x0001, IP_ACTIVE_LOW, IPT_VOLUME_UP ) // low two bits read, compared against 3 + PORT_BIT( 0x0002, IP_ACTIVE_LOW, IPT_VOLUME_DOWN ) // low four bits read, compared against f + PORT_BIT( 0x0004, IP_ACTIVE_LOW, IPT_UNKNOWN ) + PORT_BIT( 0x0008, IP_ACTIVE_LOW, IPT_UNKNOWN ) + PORT_BIT( 0x0010, IP_ACTIVE_LOW, IPT_UNKNOWN ) + PORT_BIT( 0x0020, IP_ACTIVE_LOW, IPT_UNKNOWN ) // checked + PORT_BIT( 0x0040, IP_ACTIVE_LOW, IPT_UNKNOWN ) + PORT_BIT( 0x0080, IP_ACTIVE_LOW, IPT_START1 ) // start + PORT_BIT( 0xff00, IP_ACTIVE_LOW, IPT_UNKNOWN ) + + PORT_START("IN1") + PORT_BIT( 0xffff, IP_ACTIVE_LOW, IPT_UNKNOWN ) + + PORT_START("IN2") + PORT_BIT( 0x00ff, IP_ACTIVE_LOW, IPT_UNKNOWN ) + PORT_BIT( 0x0100, IP_ACTIVE_LOW, IPT_COIN1 ) // coin + PORT_BIT( 0x0200, IP_ACTIVE_LOW, IPT_UNKNOWN ) + PORT_BIT( 0x0400, IP_ACTIVE_LOW, IPT_SERVICE1 ) + PORT_SERVICE_NO_TOGGLE( 0x0800, IP_ACTIVE_LOW ) + PORT_BIT( 0x1000, IP_ACTIVE_HIGH, IPT_SPECIAL) PORT_CUSTOM(analog_bit_r, (void *)0) + PORT_BIT( 0x2000, IP_ACTIVE_HIGH, IPT_SPECIAL) PORT_CUSTOM(analog_bit_r, (void *)1) + PORT_BIT( 0x4000, IP_ACTIVE_HIGH, IPT_SPECIAL) PORT_CUSTOM(analog_bit_r, (void *)2) + PORT_BIT( 0x8000, IP_ACTIVE_HIGH, IPT_SPECIAL) PORT_CUSTOM(analog_bit_r, (void *)3) + + PORT_START("IN3") + PORT_BIT( 0xffff, IP_ACTIVE_LOW, IPT_UNKNOWN ) + + PORT_START("ANALOG0") + PORT_BIT( 0xff, 0x80, IPT_PADDLE ) PORT_MINMAX(0x10,0xf0) PORT_SENSITIVITY(25) PORT_KEYDELTA(25) +INPUT_PORTS_END + + +static INPUT_PORTS_START( radikalb ) + PORT_START("IN0") + PORT_BIT( 0x0000ffff, IP_ACTIVE_HIGH, IPT_UNKNOWN ) + PORT_BIT( 0x00010000, IP_ACTIVE_LOW, IPT_VOLUME_UP ) + PORT_BIT( 0x00020000, IP_ACTIVE_LOW, IPT_VOLUME_DOWN ) + PORT_BIT( 0x00040000, IP_ACTIVE_LOW, IPT_UNKNOWN ) + PORT_BIT( 0x00080000, IP_ACTIVE_LOW, IPT_JOYSTICK_UP ) // handle up + PORT_BIT( 0x00100000, IP_ACTIVE_LOW, IPT_BUTTON3 ) // view + PORT_BIT( 0x00200000, IP_ACTIVE_LOW, IPT_BUTTON2 ) // brake + PORT_BIT( 0x00400000, IP_ACTIVE_LOW, IPT_BUTTON1 ) // accel + PORT_BIT( 0x00800000, IP_ACTIVE_LOW, IPT_START1 ) // start + PORT_BIT( 0xff000000, IP_ACTIVE_LOW, IPT_UNKNOWN ) + + PORT_START("IN1") + PORT_BIT( 0x0000ffff, IP_ACTIVE_HIGH, IPT_UNKNOWN ) + PORT_BIT( 0xffff0000, IP_ACTIVE_LOW, IPT_UNKNOWN ) + + PORT_START("IN2") + PORT_BIT( 0x0000ffff, IP_ACTIVE_HIGH, IPT_UNKNOWN ) + PORT_BIT( 0x00ff0000, IP_ACTIVE_LOW, IPT_UNKNOWN ) + PORT_BIT( 0x01000000, IP_ACTIVE_LOW, IPT_COIN1 ) // coin + PORT_BIT( 0x02000000, IP_ACTIVE_LOW, IPT_UNKNOWN ) + PORT_BIT( 0x04000000, IP_ACTIVE_LOW, IPT_SERVICE1 ) + PORT_SERVICE_NO_TOGGLE( 0x08000000, IP_ACTIVE_LOW ) + PORT_BIT( 0x10000000, IP_ACTIVE_HIGH, IPT_SPECIAL) PORT_CUSTOM(analog_bit_r, (void *)0) + PORT_BIT( 0x20000000, IP_ACTIVE_HIGH, IPT_SPECIAL) PORT_CUSTOM(analog_bit_r, (void *)1) + PORT_BIT( 0x40000000, IP_ACTIVE_HIGH, IPT_SPECIAL) PORT_CUSTOM(analog_bit_r, (void *)2) + PORT_BIT( 0x80000000, IP_ACTIVE_HIGH, IPT_SPECIAL) PORT_CUSTOM(analog_bit_r, (void *)3) + + PORT_START("IN3") + PORT_BIT( 0x0000ffff, IP_ACTIVE_HIGH, IPT_UNKNOWN ) + PORT_BIT( 0xffff0000, IP_ACTIVE_LOW, IPT_UNKNOWN ) + + PORT_START("ANALOG0") + PORT_BIT( 0xff, 0x80, IPT_PADDLE ) PORT_MINMAX(0x10,0xf0) PORT_SENSITIVITY(25) PORT_KEYDELTA(25) +INPUT_PORTS_END + + + +/************************************* + * + * Machine drivers + * + *************************************/ + +static const adsp21xx_config adsp_config = +{ + NULL, /* callback for serial receive */ + adsp_tx_callback, /* callback for serial transmit */ + NULL /* callback for timer fired */ +}; + +static const tms3203x_config tms_config = +{ + 0x1000, + 0, + 0, + iack_w +}; + + +static MACHINE_CONFIG_START( gaelco3d, gaelco3d_state ) + + /* basic machine hardware */ + MCFG_CPU_ADD("maincpu", M68000, 15000000) + MCFG_CPU_PROGRAM_MAP(main_map) + MCFG_CPU_VBLANK_INT("screen", vblank_gen) + + MCFG_CPU_ADD("tms", TMS32031, 60000000) + MCFG_TMS3203X_CONFIG(tms_config) + MCFG_CPU_PROGRAM_MAP(tms_map) + + MCFG_CPU_ADD("adsp", ADSP2115, 16000000) + MCFG_ADSP21XX_CONFIG(adsp_config) + MCFG_CPU_PROGRAM_MAP(adsp_program_map) + MCFG_CPU_DATA_MAP(adsp_data_map) + + MCFG_MACHINE_START(gaelco3d) + MCFG_MACHINE_RESET(gaelco3d) + + MCFG_EEPROM_93C66B_ADD("eeprom") + + MCFG_QUANTUM_TIME(attotime::from_hz(6000)) + + MCFG_TIMER_ADD("adsp_timer", adsp_autobuffer_irq) + MCFG_GAELCO_SERIAL_ADD("serial", 0, serial_interface) + + /* video hardware */ + MCFG_SCREEN_ADD("screen", RASTER) + MCFG_SCREEN_REFRESH_RATE(60) + MCFG_SCREEN_VBLANK_TIME(ATTOSECONDS_IN_USEC(2500) /* not accurate */) + MCFG_SCREEN_FORMAT(BITMAP_FORMAT_INDEXED16) + MCFG_SCREEN_SIZE(576, 432) + MCFG_SCREEN_VISIBLE_AREA(0, 575, 0, 431) + MCFG_SCREEN_UPDATE(gaelco3d) + + MCFG_PALETTE_LENGTH(32768) + + MCFG_PALETTE_INIT(RRRRR_GGGGG_BBBBB) + MCFG_VIDEO_START(gaelco3d) + + /* sound hardware */ + MCFG_SPEAKER_STANDARD_MONO("mono") + + MCFG_SOUND_ADD("dac1", DMADAC, 0) + MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 1.0) /* speedup: front mono */ + + MCFG_SOUND_ADD("dac2", DMADAC, 0) + MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 1.0) /* speedup: left rear */ + + MCFG_SOUND_ADD("dac3", DMADAC, 0) + MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 1.0) /* speedup: right rear */ + + MCFG_SOUND_ADD("dac4", DMADAC, 0) + MCFG_SOUND_ROUTE(ALL_OUTPUTS, "mono", 1.0) /* speedup: seat speaker */ +MACHINE_CONFIG_END + + +static MACHINE_CONFIG_DERIVED( gaelco3d2, gaelco3d ) + + /* basic machine hardware */ + MCFG_CPU_REPLACE("maincpu", M68EC020, 25000000) + MCFG_CPU_PROGRAM_MAP(main020_map) + MCFG_CPU_VBLANK_INT("screen", vblank_gen) + + MCFG_CPU_MODIFY("tms") + MCFG_CPU_CLOCK(50000000) + + MCFG_MACHINE_RESET(gaelco3d2) +MACHINE_CONFIG_END + + + +/************************************* + * + * ROM definitions + * + *************************************/ + +ROM_START( speedup ) + ROM_REGION( 0x200000, "maincpu", 0 ) /* 68000 code */ + ROM_LOAD16_BYTE( "sup10.bin", 0x000000, 0x80000, CRC(07e70bae) SHA1(17013d859ec075e12518b094040a056d850b3271) ) + ROM_LOAD16_BYTE( "sup15.bin", 0x000001, 0x80000, CRC(7947c28d) SHA1(46efb56d0f7fe2e92d0d04dcd2f130aef3be436d) ) + + ROM_REGION16_LE( 0x400000, "user1", 0 ) /* ADSP-2115 code & data */ + ROM_LOAD( "sup25.bin", 0x0000000, 0x400000, CRC(284c7cd1) SHA1(58fbe73195aac9808a347c543423593e17ad3a10) ) + + ROM_REGION32_LE( 0x800000, "user2", 0 ) + ROM_LOAD32_WORD( "sup32.bin", 0x000000, 0x200000, CRC(aed151de) SHA1(a139d4451d3758aa70621a25289d64c98c26d5c0) ) + ROM_LOAD32_WORD( "sup33.bin", 0x000002, 0x200000, CRC(9be6ab7d) SHA1(8bb07f2a096d1f8989a5a409f87b35b7d771de88) ) + + ROM_REGION( 0x1000000, "gfx1", 0 ) + ROM_LOAD( "sup12.bin", 0x0000000, 0x400000, CRC(311f3247) SHA1(95014ea177011521a01df85fb511e5e6673dbdcb) ) + ROM_LOAD( "sup14.bin", 0x0400000, 0x400000, CRC(3ad3c089) SHA1(1bd577679ed436251995a100aece2c26c0214fd8) ) + ROM_LOAD( "sup11.bin", 0x0800000, 0x400000, CRC(b993e65a) SHA1(b95bd4c1eac7fba1d2429250446b58f741350bb3) ) + ROM_LOAD( "sup13.bin", 0x0c00000, 0x400000, CRC(ad00023c) SHA1(9d7cce280fff38d7e0dac21e7a1774809d9758bd) ) + + ROM_REGION( 0x0080000, "gfx2", 0 ) + ROM_LOAD( "ic35.bin", 0x0000000, 0x020000, CRC(34737d1d) SHA1(e9109a88e211aa49851e72a6fa3417f1cad1cb8b) ) + ROM_LOAD( "ic34.bin", 0x0020000, 0x020000, CRC(e89e829b) SHA1(50c99bd9667d78a61252eaad5281a2e7f57be85a) ) + /* these 2 are copies of the previous 2 */ +// ROM_LOAD( "ic43.bin", 0x0000000, 0x020000, CRC(34737d1d) SHA1(e9109a88e211aa49851e72a6fa3417f1cad1cb8b) ) +// ROM_LOAD( "ic42.bin", 0x0020000, 0x020000, CRC(e89e829b) SHA1(50c99bd9667d78a61252eaad5281a2e7f57be85a) ) +ROM_END + + +ROM_START( surfplnt ) + ROM_REGION( 0x200000, "maincpu", 0 ) /* 68000 code */ + ROM_LOAD16_BYTE( "surfplnt.u5", 0x000000, 0x80000, CRC(c96e0a18) SHA1(b313d02d1d1bff8717b3d798e6ae681baefc1061) ) + ROM_LOAD16_BYTE( "surfplnt.u11", 0x000001, 0x80000, CRC(99211d2d) SHA1(dee5b157489ce9c6988c8eec92fa91fff60d521c) ) + ROM_LOAD16_BYTE( "surfplnt.u8", 0x100000, 0x80000, CRC(aef9e1d0) SHA1(15258e62fbf61e21e7d77aa7a81fdbf842fd4560) ) + ROM_LOAD16_BYTE( "surfplnt.u13", 0x100001, 0x80000, CRC(d9754369) SHA1(0d82569cb925402a9f4634e52f15435112ec4878) ) + + ROM_REGION16_LE( 0x400000, "user1", 0 ) /* ADSP-2115 code & data */ + ROM_LOAD( "pls.18", 0x0000000, 0x400000, CRC(a1b64695) SHA1(7487cd51305e30a5b55aada0bae9161fcb3fcd19) ) + + ROM_REGION32_LE( 0x800000, "user2", 0 ) + ROM_LOAD32_WORD( "pls.40", 0x000000, 0x400000, CRC(26877ad3) SHA1(2e0c15b0e060e0b3d5b5cdaf1e22b9ec8e1abc9a) ) + ROM_LOAD32_WORD( "pls.37", 0x000002, 0x400000, CRC(75893062) SHA1(81f10243336a309f8cc8532ee9a130ecc35bbcd6) ) + + ROM_REGION( 0x1000000, "gfx1", 0 ) + ROM_LOAD( "pls.7", 0x0000000, 0x400000, CRC(04bd1605) SHA1(4871758e57af5132c30137cd6c46f1a3a567b640) ) + ROM_LOAD( "pls.9", 0x0400000, 0x400000, CRC(f4400160) SHA1(206557cd4c73b6b3a04bd35b48de736c7546c5e1) ) + ROM_LOAD( "pls.12", 0x0800000, 0x400000, CRC(edc2e826) SHA1(48d428f928a9805a62bbeaecffcac21aaa76ce77) ) + ROM_LOAD( "pls.15", 0x0c00000, 0x400000, CRC(b0f6b8da) SHA1(7404ec7455adf145919a28907443994f6a5706a1) ) + + ROM_REGION( 0x0080000, "gfx2", 0 ) + ROM_LOAD( "surfplnt.u19", 0x0000000, 0x020000, CRC(691bd7a7) SHA1(2ff404b3974a64097372ed15fb5fbbe52c503265) ) + ROM_LOAD( "surfplnt.u20", 0x0020000, 0x020000, CRC(fb293318) SHA1(d255fe3db1b91ec7cc744b0158e70503bca5ceab) ) + ROM_LOAD( "surfplnt.u21", 0x0040000, 0x020000, CRC(b80611fb) SHA1(70d6767ddfb04e94cf2796e3f7090f89fd36fe8c) ) + ROM_LOAD( "surfplnt.u22", 0x0060000, 0x020000, CRC(ccf88f7e) SHA1(c6a3bb9d6cf14a93a36ed20a47b7c068ccd630aa) ) + /* these 4 are copies of the previous 4 */ +// ROM_LOAD( "surfplnt.u27", 0x0000000, 0x020000, CRC(691bd7a7) SHA1(2ff404b3974a64097372ed15fb5fbbe52c503265) ) +// ROM_LOAD( "surfplnt.u28", 0x0020000, 0x020000, CRC(fb293318) SHA1(d255fe3db1b91ec7cc744b0158e70503bca5ceab) ) +// ROM_LOAD( "surfplnt.u29", 0x0040000, 0x020000, CRC(b80611fb) SHA1(70d6767ddfb04e94cf2796e3f7090f89fd36fe8c) ) +// ROM_LOAD( "surfplnt.u30", 0x0060000, 0x020000, CRC(ccf88f7e) SHA1(c6a3bb9d6cf14a93a36ed20a47b7c068ccd630aa) ) +ROM_END + + +ROM_START( surfplnt40 ) + ROM_REGION( 0x200000, "maincpu", 0 ) /* 68000 code */ + ROM_LOAD16_BYTE( "surfpl40.u5", 0x000000, 0x80000, CRC(572e0343) SHA1(badb08a5a495611b5fd2d821d4299348b2c9f308) ) + ROM_LOAD16_BYTE( "surfpl40.u11", 0x000001, 0x80000, CRC(6056edaa) SHA1(9bc2df54d1367b9d58272a8f506e523e74110361) ) + ROM_LOAD16_BYTE( "surfplnt.u8", 0x100000, 0x80000, CRC(aef9e1d0) SHA1(15258e62fbf61e21e7d77aa7a81fdbf842fd4560) ) + ROM_LOAD16_BYTE( "surfplnt.u13", 0x100001, 0x80000, CRC(d9754369) SHA1(0d82569cb925402a9f4634e52f15435112ec4878) ) + + ROM_REGION16_LE( 0x400000, "user1", 0 ) /* ADSP-2115 code & data */ + ROM_LOAD( "pls.18", 0x0000000, 0x400000, CRC(a1b64695) SHA1(7487cd51305e30a5b55aada0bae9161fcb3fcd19) ) + + ROM_REGION32_LE( 0x800000, "user2", 0 ) + ROM_LOAD32_WORD( "pls.40", 0x000000, 0x400000, CRC(26877ad3) SHA1(2e0c15b0e060e0b3d5b5cdaf1e22b9ec8e1abc9a) ) + ROM_LOAD32_WORD( "pls.37", 0x000002, 0x400000, CRC(75893062) SHA1(81f10243336a309f8cc8532ee9a130ecc35bbcd6) ) + + ROM_REGION( 0x1000000, "gfx1", 0 ) + ROM_LOAD( "pls.7", 0x0000000, 0x400000, CRC(04bd1605) SHA1(4871758e57af5132c30137cd6c46f1a3a567b640) ) + ROM_LOAD( "pls.9", 0x0400000, 0x400000, CRC(f4400160) SHA1(206557cd4c73b6b3a04bd35b48de736c7546c5e1) ) + ROM_LOAD( "pls.12", 0x0800000, 0x400000, CRC(edc2e826) SHA1(48d428f928a9805a62bbeaecffcac21aaa76ce77) ) + ROM_LOAD( "pls.15", 0x0c00000, 0x400000, CRC(b0f6b8da) SHA1(7404ec7455adf145919a28907443994f6a5706a1) ) + + ROM_REGION( 0x0080000, "gfx2", 0 ) + ROM_LOAD( "surfplnt.u19", 0x0000000, 0x020000, CRC(691bd7a7) SHA1(2ff404b3974a64097372ed15fb5fbbe52c503265) ) + ROM_LOAD( "surfplnt.u20", 0x0020000, 0x020000, CRC(fb293318) SHA1(d255fe3db1b91ec7cc744b0158e70503bca5ceab) ) + ROM_LOAD( "surfplnt.u21", 0x0040000, 0x020000, CRC(b80611fb) SHA1(70d6767ddfb04e94cf2796e3f7090f89fd36fe8c) ) + ROM_LOAD( "surfplnt.u22", 0x0060000, 0x020000, CRC(ccf88f7e) SHA1(c6a3bb9d6cf14a93a36ed20a47b7c068ccd630aa) ) + /* these 4 are copies of the previous 4 */ +// ROM_LOAD( "surfplnt.u27", 0x0000000, 0x020000, CRC(691bd7a7) SHA1(2ff404b3974a64097372ed15fb5fbbe52c503265) ) +// ROM_LOAD( "surfplnt.u28", 0x0020000, 0x020000, CRC(fb293318) SHA1(d255fe3db1b91ec7cc744b0158e70503bca5ceab) ) +// ROM_LOAD( "surfplnt.u29", 0x0040000, 0x020000, CRC(b80611fb) SHA1(70d6767ddfb04e94cf2796e3f7090f89fd36fe8c) ) +// ROM_LOAD( "surfplnt.u30", 0x0060000, 0x020000, CRC(ccf88f7e) SHA1(c6a3bb9d6cf14a93a36ed20a47b7c068ccd630aa) ) +ROM_END + + +ROM_START( radikalb ) + ROM_REGION( 0x200000, "maincpu", 0 ) /* 68020 code */ + ROM_LOAD32_BYTE( "rab.6", 0x000000, 0x80000, CRC(ccac98c5) SHA1(43a30caf9880f48aba79676f9e746fdc6258139d) ) + ROM_LOAD32_BYTE( "rab.12", 0x000001, 0x80000, CRC(26199506) SHA1(1b7b44895aa296eab8061ae85cbb5b0d30119dc7) ) + ROM_LOAD32_BYTE( "rab.14", 0x000002, 0x80000, CRC(4a0ac8cb) SHA1(4883e5eddb833dcd39376be435aa8e8e2ec47ab5) ) + ROM_LOAD32_BYTE( "rab.19", 0x000003, 0x80000, CRC(2631bd61) SHA1(57331ad49e7284b82073f696049de109b7683b03) ) + + ROM_REGION16_LE( 0x400000, "user1", 0 ) /* ADSP-2115 code & data */ + ROM_LOAD( "rab.23", 0x0000000, 0x400000, CRC(dcf52520) SHA1(ab54421c182436660d2a56a334c1aa335424644a) ) + + ROM_REGION32_LE( 0x800000, "user2", 0 ) + ROM_LOAD32_WORD( "rab.48", 0x000000, 0x400000, CRC(9c56a06a) SHA1(54f12d8b55fa14446c47e31684c92074c4157fe1) ) + ROM_LOAD32_WORD( "rab.45", 0x000002, 0x400000, CRC(7e698584) SHA1(a9423835a126396902c499e9f7df3b68c2ab28a8) ) + + ROM_REGION( 0x2000000, "gfx1", 0 ) + ROM_LOAD( "rab.8", 0x0000000, 0x400000, CRC(4fbd4737) SHA1(594438d3edbe00682290986cc631615d7bef67f3) ) + ROM_LOAD( "rab.10", 0x0800000, 0x400000, CRC(870b0ce4) SHA1(75910dca87d2eb3a6b4a28f6e9c63a6b6700de84) ) + ROM_LOAD( "rab.15", 0x1000000, 0x400000, CRC(edb9d409) SHA1(1f8df507e990eee197f2779b45bd8f143d1bd439) ) + ROM_LOAD( "rab.17", 0x1800000, 0x400000, CRC(e120236b) SHA1(37d7996530eda3df0c19bca1cbf26e5ba58b0977) ) + + ROM_LOAD( "rab.9", 0x0400000, 0x400000, CRC(9e3e038d) SHA1(4a5f0b3c54c508d7f310f270dbd11bffb2bcfa89) ) + ROM_LOAD( "rab.11", 0x0c00000, 0x400000, CRC(75672271) SHA1(ebbdf089b4a4d5ead7d62555bb5c9a921aaa1c22) ) + ROM_LOAD( "rab.16", 0x1400000, 0x400000, CRC(9d595e46) SHA1(b985332974e1fb0b9d20d521da0d7deceea93a8a) ) + ROM_LOAD( "rab.18", 0x1c00000, 0x400000, CRC(3084bc49) SHA1(9da43482293eeb08ceae67455b2fcd97b6ef5109) ) + + ROM_REGION( 0x0080000, "gfx2", 0 ) + ROM_LOAD( "rab.24", 0x0000000, 0x020000, CRC(2984bc1d) SHA1(1f62bdaa86feeff96640e325f8241b9c5f383a44) ) + ROM_LOAD( "rab.25", 0x0020000, 0x020000, CRC(777758e3) SHA1(bd334b1ba46189ac8509eee3a4ab295c121400fd) ) + ROM_LOAD( "rab.26", 0x0040000, 0x020000, CRC(bd9c1b54) SHA1(c9ef679cf7eca9ed315ea62a7ada452bc85f7a6a) ) + ROM_LOAD( "rab.27", 0x0060000, 0x020000, CRC(bbcf6977) SHA1(0282c8ba79c35ed1240711d5812bfb590d151738) ) + /* these 4 are copies of the previous 4 */ +// ROM_LOAD( "rab.32", 0x0000000, 0x020000, CRC(2984bc1d) SHA1(1f62bdaa86feeff96640e325f8241b9c5f383a44) ) +// ROM_LOAD( "rab.33", 0x0020000, 0x020000, CRC(777758e3) SHA1(bd334b1ba46189ac8509eee3a4ab295c121400fd) ) +// ROM_LOAD( "rab.34", 0x0040000, 0x020000, CRC(bd9c1b54) SHA1(c9ef679cf7eca9ed315ea62a7ada452bc85f7a6a) ) +// ROM_LOAD( "rab.35", 0x0060000, 0x020000, CRC(bbcf6977) SHA1(0282c8ba79c35ed1240711d5812bfb590d151738) ) +ROM_END + + + +/************************************* + * + * Driver init + * + *************************************/ + +static DRIVER_INIT( gaelco3d ) +{ + gaelco3d_state *state = machine.driver_data<gaelco3d_state>(); + UINT8 *src, *dst; + int x, y; + + /* allocate memory */ + state->m_texture_size = machine.region("gfx1")->bytes(); + state->m_texmask_size = machine.region("gfx2")->bytes() * 8; + state->m_texture = auto_alloc_array(machine, UINT8, state->m_texture_size); + state->m_texmask = auto_alloc_array(machine, UINT8, state->m_texmask_size); + + /* first expand the pixel data */ + src = machine.region("gfx1")->base(); + dst = state->m_texture; + for (y = 0; y < state->m_texture_size/4096; y += 2) + for (x = 0; x < 4096; x += 2) + { + dst[(y + 0) * 4096 + (x + 1)] = src[0*state->m_texture_size/4 + (y/2) * 2048 + (x/2)]; + dst[(y + 1) * 4096 + (x + 1)] = src[1*state->m_texture_size/4 + (y/2) * 2048 + (x/2)]; + dst[(y + 0) * 4096 + (x + 0)] = src[2*state->m_texture_size/4 + (y/2) * 2048 + (x/2)]; + dst[(y + 1) * 4096 + (x + 0)] = src[3*state->m_texture_size/4 + (y/2) * 2048 + (x/2)]; + } + + /* then expand the mask data */ + src = machine.region("gfx2")->base(); + dst = state->m_texmask; + for (y = 0; y < state->m_texmask_size/4096; y++) + for (x = 0; x < 4096; x++) + dst[y * 4096 + x] = (src[(x / 1024) * (state->m_texmask_size/8/4) + (y * 1024 + x % 1024) / 8] >> (x % 8)) & 1; +} + + + +/************************************* + * + * Game drivers + * + *************************************/ + +GAME( 1996, speedup, 0, gaelco3d, speedup, gaelco3d, ROT0, "Gaelco", "Speed Up (Version 1.20)", GAME_IMPERFECT_GRAPHICS | GAME_SUPPORTS_SAVE ) +GAME( 1997, surfplnt, 0, gaelco3d, surfplnt, gaelco3d, ROT0, "Gaelco", "Surf Planet (Version 4.1)", GAME_IMPERFECT_GRAPHICS | GAME_SUPPORTS_SAVE) +GAME( 1997, surfplnt40, surfplnt, gaelco3d, surfplnt, gaelco3d, ROT0, "Gaelco", "Surf Planet (Version 4.0)", GAME_IMPERFECT_GRAPHICS | GAME_SUPPORTS_SAVE) +GAME( 1998, radikalb, 0, gaelco3d2, radikalb, gaelco3d, ROT0, "Gaelco", "Radikal Bikers (Version 2.02)", GAME_IMPERFECT_GRAPHICS | GAME_SUPPORTS_SAVE) |