diff options
Diffstat (limited to 'trunk/src/mame/drivers/aleck64.c')
-rw-r--r-- | trunk/src/mame/drivers/aleck64.c | 1081 |
1 files changed, 1081 insertions, 0 deletions
diff --git a/trunk/src/mame/drivers/aleck64.c b/trunk/src/mame/drivers/aleck64.c new file mode 100644 index 00000000000..c95812b55b3 --- /dev/null +++ b/trunk/src/mame/drivers/aleck64.c @@ -0,0 +1,1081 @@ +/* 'Aleck64' and similar boards */ +/* N64 based hardware */ +/* + +If you want to boot eleven beat on any n64 emu ?(tested on nemu, 1964 +and project64) patch the rom : +write 0 to offset $67b,$67c,$67d,$67e + +*/ + +/* + +Eleven Beat World Tournament +Hudson Soft, 1998 + +This game runs on Nintendo 64-based hardware which is manufactured by Seta. +It's very similar to the hardware used for 'Magical Tetris Featuring Mickey' +(Seta E90 main board) except the game software is contained in a cart that +plugs into a slot on the main board. The E92 board also has more RAM than +the E90 board. +The carts are not compatible with standard N64 console carts. + +PCB Layout +---------- + + Seta E92 Mother PCB + |---------------------------------------------| + --| VOL_POT | + |R|TA8139S | + RCA --| TA8201 BU9480 | + AUDIO | | + PLUGS --| AMP-NUS | + |L| | + --| BU9480 | + | TD62064 | + | UPD555 4050 | + | | + | AD813 DSW1 TC59S1616AFT-10 | + |J DSW2 TC59S1616AFT-10 | + |A 4.9152MHz | + |M | + |M | + |A SETA | + | ST-0043 | + | SETA NINTENDO | + | ST-0042 CPU-NUS A| + | | + | | + | | + | 14.31818MHz | + |X | + | MAX232 NINTENDO| + |X RDRAM18-NUS RDRAM18-NUS RCP-NUS | + | RDRAM18-NUS RDRAM18-NUS | + |X LVX125 | + | 14.705882MHz | + |X PIF-NUS | + | ------------------------------- | + | O | | | + | ------------------------------- | + |---------------------------------------------| + +Notes: + Hsync : 15.73kHz + VSync : 60Hz + O : Push-button reset switch + X : Connectors for special (Aleck64) digital joysticks + CPU-NUS A : Labelled on the PCB as "VR4300" + +The cart contains: + CIC-NUS-5101: Boot protection chip + BK4D-NUS : Similar to the save chip used in N64 console carts + NUS-ZHAJ.U3 : 64Mbit 28 pin DIP serial MASKROM + + - RCA audio plugs output stereo sound. Regular mono sound is output + via the standard JAMMA connector also. + + - ALL components are listed for completeness. However, many are power or + logic devices that most people need not be concerned about :-) + +*/ + + + +/* + +Magical Tetris Challenge Featuring Mickey +Capcom, 1998 + +This game runs on Nintendo 64-based hardware which is manufactured +by Seta. On bootup, it has the usual Capcom message.... + + +Magical Tetris Challenge + Featuring Mickey + + 981009 + + JAPAN + + +On bootup, they also mention 'T.L.S' (Temporary Landing System), which seems +to be the hardware system, designed by Arika Co. Ltd. + + +PCB Layout +---------- + + Seta E90 Main PCB Rev. B + |--------------------------------------------| + --| VOL_POT * | + |R|TA8139S TET-01M.U5 | + RCA --| TA8201 BU9480 | + AUDIO | SETA | + PLUGS --| AMP-NUS ST-0039 | + |L| 42.95454MHz | + --| BU9480 | + | TD62064 QS32X384 | + | UPD555 4050 QS32X384 | + | | + | AD813 | + |J | + |A 4.9152MHz | + |M | + |M | + |A SETA | + | SETA ST-0035 | + | ST-0042 NINTENDO | + | MX8330 CPU-NUS A | + | 14.31818MHz | + | | + |X AT24C01.U34 NINTENDO | + | RDRAM18-NUS | + |X | + | MAX232 NINTENDO NINTENDO | + |X LT1084 RDRAM18-NUS RCP-NUS | + | LVX125 MX8330 | + |X PIF-NUS 14.31818MHz | + | O CIC-NUS-5101 BK4D-NUS NUS-CZAJ.U4 | + |--------------------------------------------| + +Notes: + Hsync : 15.73kHz + VSync : 60Hz + * : Unpopulated socket for 8M - 32M 42 pin DIP MASKROM + O : Push-button reset switch + X : Connectors for special (Aleck64?) digital joysticks + CPU-NUS A : Labelled on the PCB as "VR4300" + BK4D-NUS : Similar to the save chip used in N64 console carts + + ROMs + ---- + TET-01M.U5 : 8Mbit 42 pin MASKROM + NUS-CZAJ.U4: 128Mbit 28 pin DIP serial MASKROM + AT24C01.U34: 128bytes x 8 bit serial EEPROM + + - RCA audio plugs output stereo sound. Regular mono sound is output + via the standard JAMMA connector also. + + - ALL components are listed for completeness. However, many are power or + logic devices that most people need not be concerned about :-) + + - The Seta/N64 Aleck64 hardware is similar also, but instead of the hich capacity + serial MASKROM being on the main board, it's in a cart that plugs into a slot. + +*/ + +#include "emu.h" +#include "cpu/rsp/rsp.h" +#include "cpu/mips/mips3.h" +#include "sound/dmadac.h" +#include "includes/n64.h" + +static UINT32 dip_read_offset = 0; +static WRITE32_HANDLER( aleck_dips_w ) +{ + /* + mtetrisc uses offset 0x1c and 0x03 a good bit in conjunction with reading INMJ. + (See Test menu GAME DATA and MEMORY CHECK/S2D Ram test, also CONFIGURATION/save & exit. eeprom? Serial2DRAM?) + + srmvs uses 0x40, communications? + */ + + switch( offset ) + { + case 2: + dip_read_offset = data; + break; + + default: + logerror("Unknown aleck_dips_w(0x%08x, 0x%08x, %08x) @ 0x%08x PC=%08x\n", offset, data, mem_mask, 0xc0800000 + offset*4, cpu_get_pc(&space->device())); + } +} + +static READ32_HANDLER( aleck_dips_r ) +{ + // srmvs uses 0x40, communications? + + switch( offset ) + { + case 0: + return (space->machine().root_device().ioport("IN0")->read()); /* mtetrisc has regular inputs here */ + case 1: + return (space->machine().root_device().ioport("IN1")->read()); + case 2: + { + UINT32 val = space->machine().root_device().ioport("INMJ")->read(); + + switch( dip_read_offset >> 8 & 0xff ) + { + case 1: + return val; + + case 2: + return val << 8; + + case 4: + return val << 16; + + case 8: + return val >> 8; + + default: + logerror("Unexpected read from INMJ with no dip_read_offset set.\n"); + return 0; + } + } + default: + { + logerror("Unknown aleck_dips_r(0x%08x, 0x%08x) @ 0x%08x PC=%08x\n", offset, 0xc0800000 + offset*4, mem_mask, cpu_get_pc(&space->device())); + return 0; + } + } +} + +/* + + The TLB entries made by all games show that the programmers put in extra mappings. + Some of these are big, every game adds a mapping for 4MB at 0xc0000000 physical. + Some add more than one 4MB mapping. As some of the boards are only 4MB RAM, + it seems likely that the programmers expected main RAM to be mirrored at 0xc0000000. + Some of the games have a further 4MB mapping to a pgysical segment contiguous with + the first at 0xc0000000, so if these games are on the E92 8MB boards, this would + add a bit of support to the mirror idea. + + Adding the mirror makes everything go pretty well, + it makes doncdoon, hipai, kurufev, srmvs, twrshaft boot. + + There's still a couple of problems though: + - srmvs and vivdolls system test screen actually check "SDRAM" at 0xc0000000. + This all goes well until they overwrite the RAM test code which is running from + virtual memory backed by the same physical memory as it's testing. + (maybe this is related to the fact that the check code is executing from a cacheable kseg0 range, + and the TLB entry for 0xc0000000 is in kuseg and flagged as non-cache?) + - srmvs reads a jump vector from memory mapped to physical segment at 0xc0000000 that's been overwritten + by a boot up memory test of that segment, so it crashes with a bad access during the intro. + + Both these problems go away by adding new RAM at 0xc0000000 physical, but maybe they are related to + caching? + + Here's a full list of the physical addresses mapped by tlb entries, along with the names of the games + that make the mappings and which games actually use them. + + 4MB @ 0xc0000000 - 0xc03fffff ALL : used by doncdoon, hipai, kurufev, srmvs, twrshaft + 4MB @ 0xc0400000 - 0xc07fffff mayjin3, vivdolls, 11beat, starsldr, mtetrisc : unused + 4MB @ 0xc0401000 - 0xc0800fff 11beat, starsldr (odd-page entry, overlaps inputs) : unused + 4KB @ 0xc0800000 - 0xc0800fff ALL (inputs) + 4KB @ 0xc0801000 - 0xc0801fff mayjin3, vivdolls, 11beat, starsldr, mtetrisc : unused + 4KB @ 0xc0810000 - 0xc0810fff 11beat, starsldr, mtetrisc : unused + 4KB @ 0xc0811000 - 0xc0811fff 11beat, starsldr, mtetrisc : unused + 4KB @ 0xc0c00000 - 0xc0c00fff doncdoon, hipai, kurufev, twrshaft, srmvs, mayjin3, vivdolls : unused + 4KB @ 0xc0c01000 - 0xc0c01fff mayjin3, vivdolls : unused + 1MB @ 0xd0000000 - 0xd00fffff mtetrisc : used but write only + 1MB @ 0xd0100000 - 0xd01fffff mtetrisc : unused + 4MB @ 0xd0800000 - 0xd0bfffff doncdoon, hipai, kurufev, twrshaft, srmvs : unused + */ + +static ADDRESS_MAP_START( n64_map, AS_PROGRAM, 32, n64_state ) + AM_RANGE(0x00000000, 0x007fffff) AM_RAM /*AM_MIRROR(0xc0000000)*/ AM_BASE_LEGACY(&rdram) // RDRAM + + AM_RANGE(0x03f00000, 0x03f00027) AM_DEVREADWRITE("rcp", n64_periphs, rdram_reg_r, rdram_reg_w) + AM_RANGE(0x04000000, 0x04000fff) AM_RAM AM_SHARE("dmem") // RSP DMEM + AM_RANGE(0x04001000, 0x04001fff) AM_RAM AM_SHARE("imem") // RSP IMEM + AM_RANGE(0x04040000, 0x040fffff) AM_DEVREADWRITE_LEGACY("rsp", n64_sp_reg_r, n64_sp_reg_w) // RSP + AM_RANGE(0x04100000, 0x041fffff) AM_DEVREADWRITE_LEGACY("rsp", n64_dp_reg_r, n64_dp_reg_w) // RDP + AM_RANGE(0x04300000, 0x043fffff) AM_DEVREADWRITE("rcp", n64_periphs, mi_reg_r, mi_reg_w) // MIPS Interface + AM_RANGE(0x04400000, 0x044fffff) AM_DEVREADWRITE("rcp", n64_periphs, vi_reg_r, vi_reg_w) // Video Interface + AM_RANGE(0x04500000, 0x045fffff) AM_DEVREADWRITE("rcp", n64_periphs, ai_reg_r, ai_reg_w) // Audio Interface + AM_RANGE(0x04600000, 0x046fffff) AM_DEVREADWRITE("rcp", n64_periphs, pi_reg_r, pi_reg_w) // Peripheral Interface + AM_RANGE(0x04700000, 0x047fffff) AM_DEVREADWRITE("rcp", n64_periphs, ri_reg_r, ri_reg_w) // RDRAM Interface + AM_RANGE(0x04800000, 0x048fffff) AM_DEVREADWRITE("rcp", n64_periphs, si_reg_r, si_reg_w) // Serial Interface + AM_RANGE(0x10000000, 0x13ffffff) AM_ROM AM_REGION("user2", 0) // Cartridge + AM_RANGE(0x1fc00000, 0x1fc007bf) AM_ROM AM_REGION("user1", 0) // PIF ROM + AM_RANGE(0x1fc007c0, 0x1fc007ff) AM_DEVREADWRITE("rcp", n64_periphs, pif_ram_r, pif_ram_w) + + /* + Surely this should mirror main ram? srmvs crashes, and + vivdolls overwrites it's memory test code if it does mirror + */ + AM_RANGE(0xc0000000, 0xc07fffff) AM_RAM + + AM_RANGE(0xc0800000, 0xc0800fff) AM_READWRITE_LEGACY(aleck_dips_r,aleck_dips_w) + AM_RANGE(0xd0000000, 0xd00fffff) AM_RAM // mtetrisc, write only, mirror? + +ADDRESS_MAP_END + +static ADDRESS_MAP_START( rsp_map, AS_PROGRAM, 32, n64_state ) + AM_RANGE(0x00000000, 0x00000fff) AM_RAM AM_SHARE("dmem") + AM_RANGE(0x00001000, 0x00001fff) AM_RAM AM_SHARE("imem") + AM_RANGE(0x04000000, 0x04000fff) AM_RAM AM_BASE_LEGACY(&rsp_dmem) AM_SHARE("dmem") + AM_RANGE(0x04001000, 0x04001fff) AM_RAM AM_BASE_LEGACY(&rsp_imem) AM_SHARE("imem") +ADDRESS_MAP_END + +static INPUT_PORTS_START( aleck64 ) + PORT_START("P1") + PORT_BIT( 0x8000, IP_ACTIVE_HIGH, IPT_BUTTON1 ) PORT_PLAYER(1) // Button A + PORT_BIT( 0x4000, IP_ACTIVE_HIGH, IPT_BUTTON2 ) PORT_PLAYER(1) // Button B + PORT_BIT( 0x2000, IP_ACTIVE_HIGH, IPT_BUTTON3 ) PORT_PLAYER(1) // Button Z + PORT_BIT( 0x1000, IP_ACTIVE_HIGH, IPT_START1 ) // Start + PORT_BIT( 0x0800, IP_ACTIVE_HIGH, IPT_JOYSTICK_UP ) PORT_PLAYER(1) // Joypad Up + PORT_BIT( 0x0400, IP_ACTIVE_HIGH, IPT_JOYSTICK_DOWN ) PORT_PLAYER(1) // Joypad Down + PORT_BIT( 0x0200, IP_ACTIVE_HIGH, IPT_JOYSTICK_LEFT ) PORT_PLAYER(1) // Joypad Left + PORT_BIT( 0x0100, IP_ACTIVE_HIGH, IPT_JOYSTICK_RIGHT ) PORT_PLAYER(1) // Joypad Right + PORT_BIT( 0x00c0, IP_ACTIVE_HIGH, IPT_UNUSED ) + PORT_BIT( 0x0020, IP_ACTIVE_HIGH, IPT_BUTTON4 ) PORT_PLAYER(1) // Pan Left + PORT_BIT( 0x0010, IP_ACTIVE_HIGH, IPT_BUTTON5 ) PORT_PLAYER(1) // Pan Right + PORT_BIT( 0x0008, IP_ACTIVE_HIGH, IPT_BUTTON6 ) PORT_PLAYER(1) // C Button Up + PORT_BIT( 0x0004, IP_ACTIVE_HIGH, IPT_BUTTON7 ) PORT_PLAYER(1) // C Button Down + PORT_BIT( 0x0002, IP_ACTIVE_HIGH, IPT_BUTTON8 ) PORT_PLAYER(1) // C Button Left + PORT_BIT( 0x0001, IP_ACTIVE_HIGH, IPT_BUTTON9 ) PORT_PLAYER(1) // C Button Right + + PORT_START("P1_ANALOG_X") + PORT_BIT( 0xff, 0x80, IPT_AD_STICK_X ) PORT_SENSITIVITY(30) PORT_KEYDELTA(30) PORT_PLAYER(1) + + PORT_START("P1_ANALOG_Y") + PORT_BIT( 0xff, 0x80, IPT_AD_STICK_Y ) PORT_MINMAX(0xff,0x00) PORT_SENSITIVITY(30) PORT_KEYDELTA(30) PORT_PLAYER(1) + + PORT_START("P2") + PORT_BIT( 0x8000, IP_ACTIVE_HIGH, IPT_BUTTON1 ) PORT_PLAYER(2) // Button A + PORT_BIT( 0x4000, IP_ACTIVE_HIGH, IPT_BUTTON2 ) PORT_PLAYER(2) // Button B + PORT_BIT( 0x2000, IP_ACTIVE_HIGH, IPT_BUTTON3 ) PORT_PLAYER(2) // Button Z + PORT_BIT( 0x1000, IP_ACTIVE_HIGH, IPT_START2 ) // Start + PORT_BIT( 0x0800, IP_ACTIVE_HIGH, IPT_JOYSTICK_UP ) PORT_PLAYER(2) // Joypad Up + PORT_BIT( 0x0400, IP_ACTIVE_HIGH, IPT_JOYSTICK_DOWN ) PORT_PLAYER(2) // Joypad Down + PORT_BIT( 0x0200, IP_ACTIVE_HIGH, IPT_JOYSTICK_LEFT ) PORT_PLAYER(2) // Joypad Left + PORT_BIT( 0x0100, IP_ACTIVE_HIGH, IPT_JOYSTICK_RIGHT ) PORT_PLAYER(2) // Joypad Right + PORT_BIT( 0x00c0, IP_ACTIVE_HIGH, IPT_UNUSED ) + PORT_BIT( 0x0020, IP_ACTIVE_HIGH, IPT_BUTTON4 ) PORT_PLAYER(2) // Pan Left + PORT_BIT( 0x0010, IP_ACTIVE_HIGH, IPT_BUTTON5 ) PORT_PLAYER(2) // Pan Right + PORT_BIT( 0x0008, IP_ACTIVE_HIGH, IPT_BUTTON6 ) PORT_PLAYER(2) // C Button Up + PORT_BIT( 0x0004, IP_ACTIVE_HIGH, IPT_BUTTON7 ) PORT_PLAYER(2) // C Button Down + PORT_BIT( 0x0002, IP_ACTIVE_HIGH, IPT_BUTTON8 ) PORT_PLAYER(2) // C Button Left + PORT_BIT( 0x0001, IP_ACTIVE_HIGH, IPT_BUTTON9 ) PORT_PLAYER(2) // C Button Right + + PORT_START("P2_ANALOG_X") + PORT_BIT( 0xff, 0x80, IPT_AD_STICK_X ) PORT_SENSITIVITY(30) PORT_KEYDELTA(30) PORT_PLAYER(2) + + PORT_START("P2_ANALOG_Y") + PORT_BIT( 0xff, 0x80, IPT_AD_STICK_Y ) PORT_MINMAX(0xff,0x00) PORT_SENSITIVITY(30) PORT_KEYDELTA(30) PORT_PLAYER(2) + + PORT_START("IN0") + PORT_DIPNAME( 0x80000000, 0x80000000, "DIPSW1 #8" ) PORT_DIPLOCATION("SW1:8") + PORT_DIPSETTING( 0x80000000, DEF_STR( Off ) ) + PORT_DIPSETTING( 0x00000000, DEF_STR( On ) ) + PORT_DIPNAME( 0x40000000, 0x40000000, "DIPSW1 #7" ) PORT_DIPLOCATION("SW1:7") + PORT_DIPSETTING( 0x40000000, DEF_STR( Off ) ) + PORT_DIPSETTING( 0x00000000, DEF_STR( On ) ) + PORT_DIPNAME( 0x20000000, 0x20000000, "DIPSW1 #6" ) PORT_DIPLOCATION("SW1:6") + PORT_DIPSETTING( 0x20000000, DEF_STR( Off ) ) + PORT_DIPSETTING( 0x00000000, DEF_STR( On ) ) + PORT_DIPNAME( 0x10000000, 0x10000000, "DIPSW1 #5" ) PORT_DIPLOCATION("SW1:5") + PORT_DIPSETTING( 0x10000000, DEF_STR( Off ) ) + PORT_DIPSETTING( 0x00000000, DEF_STR( On ) ) + PORT_DIPNAME( 0x08000000, 0x08000000, "DIPSW1 #4" ) PORT_DIPLOCATION("SW1:4") + PORT_DIPSETTING( 0x08000000, DEF_STR( Off ) ) + PORT_DIPSETTING( 0x00000000, DEF_STR( On ) ) + PORT_DIPNAME( 0x04000000, 0x04000000, "DIPSW1 #3" ) PORT_DIPLOCATION("SW1:3") + PORT_DIPSETTING( 0x04000000, DEF_STR( Off ) ) + PORT_DIPSETTING( 0x00000000, DEF_STR( On ) ) + PORT_DIPNAME( 0x02000000, 0x02000000, "DIPSW1 #2" ) PORT_DIPLOCATION("SW1:2") + PORT_DIPSETTING( 0x02000000, DEF_STR( Off ) ) + PORT_DIPSETTING( 0x00000000, DEF_STR( On ) ) + PORT_DIPNAME( 0x01000000, 0x01000000, "DIPSW1 #1" ) PORT_DIPLOCATION("SW1:1") + PORT_DIPSETTING( 0x01000000, DEF_STR( Off ) ) + PORT_DIPSETTING( 0x00000000, DEF_STR( On ) ) + PORT_DIPNAME( 0x00800000, 0x00800000, "Test Mode" ) PORT_DIPLOCATION("SW2:8") + PORT_DIPSETTING( 0x00800000, DEF_STR( Off ) ) + PORT_DIPSETTING( 0x00000000, DEF_STR( On ) ) + PORT_DIPNAME( 0x00400000, 0x00400000, "DIPSW2 #7" ) PORT_DIPLOCATION("SW2:7") + PORT_DIPSETTING( 0x00400000, DEF_STR( Off ) ) + PORT_DIPSETTING( 0x00000000, DEF_STR( On ) ) + PORT_DIPNAME( 0x00200000, 0x00200000, "DIPSW2 #6" ) PORT_DIPLOCATION("SW2:6") + PORT_DIPSETTING( 0x00200000, DEF_STR( Off ) ) + PORT_DIPSETTING( 0x00000000, DEF_STR( On ) ) + PORT_DIPNAME( 0x00100000, 0x00100000, "DIPSW2 #5" ) PORT_DIPLOCATION("SW2:5") + PORT_DIPSETTING( 0x00100000, DEF_STR( Off ) ) + PORT_DIPSETTING( 0x00000000, DEF_STR( On ) ) + PORT_DIPNAME( 0x00080000, 0x00080000, "DIPSW2 #4" ) PORT_DIPLOCATION("SW2:4") + PORT_DIPSETTING( 0x00080000, DEF_STR( Off ) ) + PORT_DIPSETTING( 0x00000000, DEF_STR( On ) ) + PORT_DIPNAME( 0x00040000, 0x00040000, "DIPSW2 #3" ) PORT_DIPLOCATION("SW2:3") + PORT_DIPSETTING( 0x00040000, DEF_STR( Off ) ) + PORT_DIPSETTING( 0x00000000, DEF_STR( On ) ) + PORT_DIPNAME( 0x00020000, 0x00020000, "DIPSW2 #2" ) PORT_DIPLOCATION("SW2:2") + PORT_DIPSETTING( 0x00020000, DEF_STR( Off ) ) + PORT_DIPSETTING( 0x00000000, DEF_STR( On ) ) + PORT_DIPNAME( 0x00010000, 0x00010000, "DIPSW2 #1" ) PORT_DIPLOCATION("SW2:1") + PORT_DIPSETTING( 0x00010000, DEF_STR( Off ) ) + PORT_DIPSETTING( 0x00000000, DEF_STR( On ) ) + PORT_BIT(0x0000ffff, IP_ACTIVE_LOW, IPT_UNUSED ) + + PORT_START("IN1") + PORT_BIT( 0xff00ffff, IP_ACTIVE_LOW, IPT_UNUSED ) + PORT_SERVICE_NO_TOGGLE( 0x00200000, IP_ACTIVE_LOW ) + PORT_BIT( 0x00100000, IP_ACTIVE_LOW, IPT_SERVICE ) PORT_NAME("Service Button") PORT_CODE(KEYCODE_7) + PORT_BIT( 0x00080000, IP_ACTIVE_LOW, IPT_COIN2 ) + PORT_BIT( 0x00040000, IP_ACTIVE_LOW, IPT_COIN1 ) +INPUT_PORTS_END + +static INPUT_PORTS_START( 11beat ) + PORT_INCLUDE( aleck64 ) + + PORT_MODIFY("P1_ANALOG_Y") + PORT_BIT( 0xff, IP_ACTIVE_HIGH, IPT_UNUSED ) + PORT_MODIFY("P2_ANALOG_X") + PORT_BIT( 0xff, IP_ACTIVE_HIGH, IPT_UNUSED ) + PORT_MODIFY("P2_ANALOG_Y") + PORT_BIT( 0xff, IP_ACTIVE_HIGH, IPT_UNUSED ) + PORT_MODIFY("P1_ANALOG_X") + PORT_BIT( 0xff, IP_ACTIVE_HIGH, IPT_UNUSED ) + + PORT_MODIFY("P1") + PORT_BIT( 0x2000, IP_ACTIVE_HIGH, IPT_UNUSED ) + PORT_BIT( 0x0020, IP_ACTIVE_HIGH, IPT_UNUSED ) + PORT_BIT( 0x0010, IP_ACTIVE_HIGH, IPT_BUTTON3 ) PORT_PLAYER(1) + PORT_BIT( 0x0008, IP_ACTIVE_HIGH, IPT_UNUSED ) + PORT_BIT( 0x0004, IP_ACTIVE_HIGH, IPT_UNUSED ) + PORT_BIT( 0x0002, IP_ACTIVE_HIGH, IPT_UNUSED ) + PORT_BIT( 0x0001, IP_ACTIVE_HIGH, IPT_BUTTON4 ) PORT_PLAYER(1) + + PORT_MODIFY("P2") + PORT_BIT( 0x2000, IP_ACTIVE_HIGH, IPT_UNUSED ) + PORT_BIT( 0x0020, IP_ACTIVE_HIGH, IPT_UNUSED ) + PORT_BIT( 0x0010, IP_ACTIVE_HIGH, IPT_BUTTON3 ) PORT_PLAYER(2) + PORT_BIT( 0x0008, IP_ACTIVE_HIGH, IPT_UNUSED ) + PORT_BIT( 0x0004, IP_ACTIVE_HIGH, IPT_UNUSED ) + PORT_BIT( 0x0002, IP_ACTIVE_HIGH, IPT_UNUSED ) + PORT_BIT( 0x0001, IP_ACTIVE_HIGH, IPT_BUTTON4 ) PORT_PLAYER(2) + +INPUT_PORTS_END + +static INPUT_PORTS_START( mtetrisc ) + // The basic N64 controls are unused in this game + PORT_START("P1") + PORT_START("P1_ANALOG_X") + PORT_START("P1_ANALOG_Y") + PORT_START("P2") + PORT_START("P2_ANALOG_X") + PORT_START("P2_ANALOG_Y") + PORT_START("INMJ") + + PORT_START("IN0") + PORT_BIT( 0xffff0000, IP_ACTIVE_LOW, IPT_UNUSED ) + PORT_BIT( 0x00008000, IP_ACTIVE_LOW, IPT_START2 ) + PORT_BIT( 0x00004000, IP_ACTIVE_LOW, IPT_UNUSED ) + PORT_BIT( 0x00002000, IP_ACTIVE_LOW, IPT_BUTTON2 ) PORT_PLAYER(2) + PORT_BIT( 0x00001000, IP_ACTIVE_LOW, IPT_BUTTON1 ) PORT_PLAYER(2) + PORT_BIT( 0x00000800, IP_ACTIVE_LOW, IPT_JOYSTICK_RIGHT ) PORT_PLAYER(2) + PORT_BIT( 0x00000400, IP_ACTIVE_LOW, IPT_JOYSTICK_LEFT ) PORT_PLAYER(2) + PORT_BIT( 0x00000200, IP_ACTIVE_LOW, IPT_JOYSTICK_DOWN ) PORT_PLAYER(2) + PORT_BIT( 0x00000100, IP_ACTIVE_LOW, IPT_JOYSTICK_UP ) PORT_PLAYER(2) + PORT_BIT( 0x00000080, IP_ACTIVE_LOW, IPT_START1 ) + PORT_BIT( 0x00000040, IP_ACTIVE_LOW, IPT_UNUSED ) + PORT_BIT( 0x00000020, IP_ACTIVE_LOW, IPT_BUTTON2 ) PORT_PLAYER(1) + PORT_BIT( 0x00000010, IP_ACTIVE_LOW, IPT_BUTTON1 ) PORT_PLAYER(1) + PORT_BIT( 0x00000008, IP_ACTIVE_LOW, IPT_JOYSTICK_RIGHT ) PORT_PLAYER(1) + PORT_BIT( 0x00000004, IP_ACTIVE_LOW, IPT_JOYSTICK_LEFT ) PORT_PLAYER(1) + PORT_BIT( 0x00000002, IP_ACTIVE_LOW, IPT_JOYSTICK_DOWN ) PORT_PLAYER(1) + PORT_BIT( 0x00000001, IP_ACTIVE_LOW, IPT_JOYSTICK_UP ) PORT_PLAYER(1) + + PORT_START("IN1") + PORT_BIT( 0xffcc, IP_ACTIVE_LOW, IPT_UNUSED ) + PORT_SERVICE_NO_TOGGLE( 0x0020, IP_ACTIVE_LOW ) + PORT_BIT( 0x0010, IP_ACTIVE_LOW, IPT_SERVICE ) PORT_NAME("Service Button") PORT_CODE(KEYCODE_7) + PORT_BIT( 0x0002, IP_ACTIVE_LOW, IPT_COIN2 ) + PORT_BIT( 0x0001, IP_ACTIVE_LOW, IPT_COIN1 ) +INPUT_PORTS_END + +static INPUT_PORTS_START( starsldr ) + PORT_START("P1") + PORT_BIT( 0x8000, IP_ACTIVE_HIGH, IPT_BUTTON1 ) PORT_PLAYER(1) // Button A + PORT_BIT( 0x4000, IP_ACTIVE_HIGH, IPT_BUTTON2 ) PORT_PLAYER(1) // Button B + PORT_BIT( 0x2000, IP_ACTIVE_HIGH, IPT_UNUSED ) + PORT_BIT( 0x1000, IP_ACTIVE_HIGH, IPT_START1 ) // Start + PORT_BIT( 0x0800, IP_ACTIVE_HIGH, IPT_JOYSTICK_UP ) PORT_PLAYER(1) // Joypad Up + PORT_BIT( 0x0400, IP_ACTIVE_HIGH, IPT_JOYSTICK_DOWN ) PORT_PLAYER(1) // Joypad Down + PORT_BIT( 0x0200, IP_ACTIVE_HIGH, IPT_JOYSTICK_LEFT ) PORT_PLAYER(1) // Joypad Left + PORT_BIT( 0x0100, IP_ACTIVE_HIGH, IPT_JOYSTICK_RIGHT ) PORT_PLAYER(1) // Joypad Right + PORT_BIT( 0x00c0, IP_ACTIVE_HIGH, IPT_UNUSED ) + PORT_BIT( 0x0020, IP_ACTIVE_HIGH, IPT_UNUSED ) + PORT_BIT( 0x0010, IP_ACTIVE_HIGH, IPT_BUTTON3 ) PORT_PLAYER(1) // Button C + PORT_BIT( 0x0008, IP_ACTIVE_HIGH, IPT_UNUSED ) + PORT_BIT( 0x0004, IP_ACTIVE_HIGH, IPT_UNUSED ) + PORT_BIT( 0x0002, IP_ACTIVE_HIGH, IPT_UNUSED ) + PORT_BIT( 0x0001, IP_ACTIVE_HIGH, IPT_BUTTON4 ) PORT_PLAYER(1) // Button D + + PORT_START("P1_ANALOG_X") + PORT_BIT( 0xff, 0x80, IPT_AD_STICK_X ) PORT_SENSITIVITY(30) PORT_KEYDELTA(30) PORT_PLAYER(1) + + PORT_START("P1_ANALOG_Y") + PORT_BIT( 0xff, 0x80, IPT_AD_STICK_Y ) PORT_MINMAX(0xff,0x00) PORT_SENSITIVITY(30) PORT_KEYDELTA(30) PORT_PLAYER(1) + + PORT_START("P2") + PORT_BIT( 0x8000, IP_ACTIVE_HIGH, IPT_BUTTON1 ) PORT_PLAYER(2) // Button A + PORT_BIT( 0x4000, IP_ACTIVE_HIGH, IPT_BUTTON2 ) PORT_PLAYER(2) // Button B + PORT_BIT( 0x2000, IP_ACTIVE_HIGH, IPT_UNUSED ) + PORT_BIT( 0x1000, IP_ACTIVE_HIGH, IPT_START2 ) // Start + PORT_BIT( 0x0800, IP_ACTIVE_HIGH, IPT_JOYSTICK_UP ) PORT_PLAYER(2) // Joypad Up + PORT_BIT( 0x0400, IP_ACTIVE_HIGH, IPT_JOYSTICK_DOWN ) PORT_PLAYER(2) // Joypad Down + PORT_BIT( 0x0200, IP_ACTIVE_HIGH, IPT_JOYSTICK_LEFT ) PORT_PLAYER(2) // Joypad Left + PORT_BIT( 0x0100, IP_ACTIVE_HIGH, IPT_JOYSTICK_RIGHT ) PORT_PLAYER(2) // Joypad Right + PORT_BIT( 0x00c0, IP_ACTIVE_HIGH, IPT_UNUSED ) + PORT_BIT( 0x0020, IP_ACTIVE_HIGH, IPT_UNUSED ) + PORT_BIT( 0x0010, IP_ACTIVE_HIGH, IPT_BUTTON3 ) PORT_PLAYER(2) // Button C + PORT_BIT( 0x0008, IP_ACTIVE_HIGH, IPT_UNUSED ) + PORT_BIT( 0x0004, IP_ACTIVE_HIGH, IPT_UNUSED ) + PORT_BIT( 0x0002, IP_ACTIVE_HIGH, IPT_UNUSED ) + PORT_BIT( 0x0001, IP_ACTIVE_HIGH, IPT_BUTTON4 ) PORT_PLAYER(2) // Button D + + PORT_START("P2_ANALOG_X") + PORT_BIT( 0xff, 0x80, IPT_AD_STICK_X ) PORT_SENSITIVITY(30) PORT_KEYDELTA(30) PORT_PLAYER(2) + + PORT_START("P2_ANALOG_Y") + PORT_BIT( 0xff, 0x80, IPT_AD_STICK_Y ) PORT_MINMAX(0xff,0x00) PORT_SENSITIVITY(30) PORT_KEYDELTA(30) PORT_PLAYER(2) + + + PORT_START("IN0") + PORT_DIPNAME( 0x80000000, 0x00000000, DEF_STR(Joystick) ) PORT_DIPLOCATION("SW1:8") + PORT_DIPSETTING( 0x00000000, DEF_STR(Joystick) ) + PORT_DIPSETTING( 0x80000000, "3D" ) + PORT_DIPNAME( 0x60000000, 0x60000000, "Auto Level" ) PORT_DIPLOCATION("SW1:6,7") + PORT_DIPSETTING( 0x60000000, DEF_STR(Normal) ) + PORT_DIPSETTING( 0x40000000, "Slow" ) + PORT_DIPSETTING( 0x20000000, "Fast1" ) + PORT_DIPSETTING( 0x00000000, "Fast2" ) + PORT_DIPNAME( 0x18000000, 0x18000000, "Player" ) PORT_DIPLOCATION("SW1:4,5") + PORT_DIPSETTING( 0x18000000, "3" ) + PORT_DIPSETTING( 0x10000000, "4" ) + PORT_DIPSETTING( 0x08000000, "2" ) + PORT_DIPSETTING( 0x00000000, "1" ) + PORT_DIPNAME( 0x07000000, 0x07000000, DEF_STR(Coinage) ) PORT_DIPLOCATION("SW1:1,2,3") + PORT_DIPSETTING( 0x00000000, DEF_STR( 5C_1C ) ) + PORT_DIPSETTING( 0x01000000, DEF_STR( 4C_1C ) ) + PORT_DIPSETTING( 0x02000000, DEF_STR( 3C_1C ) ) + PORT_DIPSETTING( 0x03000000, DEF_STR( 2C_1C ) ) + PORT_DIPSETTING( 0x07000000, DEF_STR( 1C_1C ) ) + PORT_DIPSETTING( 0x06000000, DEF_STR( 1C_2C ) ) + PORT_DIPSETTING( 0x05000000, DEF_STR( 1C_3C ) ) + PORT_DIPSETTING( 0x04000000, DEF_STR( 1C_4C ) ) + PORT_DIPNAME( 0x00800000, 0x00800000, "DIPSW2 #8" ) PORT_DIPLOCATION("SW2:8") + PORT_DIPSETTING( 0x00800000, DEF_STR( Off ) ) + PORT_DIPSETTING( 0x00000000, DEF_STR( On ) ) + PORT_DIPNAME( 0x00400000, 0x00400000, DEF_STR(Language) ) PORT_DIPLOCATION("SW2:7") + PORT_DIPSETTING( 0x00400000, DEF_STR(English) ) + PORT_DIPSETTING( 0x00000000, DEF_STR(Japanese) ) + PORT_DIPNAME( 0x00200000, 0x00000000, "Demosound" ) PORT_DIPLOCATION("SW2:6") + PORT_DIPSETTING( 0x00200000, DEF_STR( Off ) ) + PORT_DIPSETTING( 0x00000000, DEF_STR( On ) ) + PORT_DIPNAME( 0x00100000, 0x00100000, "Rapid" ) PORT_DIPLOCATION("SW2:5") + PORT_DIPSETTING( 0x00000000, DEF_STR( Off ) ) + PORT_DIPSETTING( 0x00100000, DEF_STR( On ) ) + PORT_DIPNAME( 0x000c0000, 0x000c0000, "Extend" ) PORT_DIPLOCATION("SW2:3,4") + PORT_DIPSETTING( 0x000c0000, "Every 30000000" ) + PORT_DIPSETTING( 0x00080000, "Every 50000000" ) + PORT_DIPSETTING( 0x00040000, "Every 70000000" ) + PORT_DIPSETTING( 0x00000000, "Non" ) + PORT_DIPNAME( 0x00030000, 0x00030000, DEF_STR(Difficulty) ) PORT_DIPLOCATION("SW2:1,2") + PORT_DIPSETTING( 0x00030000, DEF_STR(Normal) ) + PORT_DIPSETTING( 0x00020000, DEF_STR(Easy) ) + PORT_DIPSETTING( 0x00010000, "Hard1" ) + PORT_DIPSETTING( 0x00000000, "Hard2" ) + PORT_BIT(0x0000ffff, IP_ACTIVE_LOW, IPT_UNUSED ) + + PORT_START("IN1") + PORT_BIT( 0xff00ffff, IP_ACTIVE_LOW, IPT_UNUSED ) + PORT_SERVICE_NO_TOGGLE( 0x00200000, IP_ACTIVE_LOW ) + PORT_BIT( 0x00100000, IP_ACTIVE_LOW, IPT_SERVICE ) PORT_NAME("Service Button") PORT_CODE(KEYCODE_7) + PORT_BIT( 0x00080000, IP_ACTIVE_LOW, IPT_COIN2 ) + PORT_BIT( 0x00040000, IP_ACTIVE_LOW, IPT_COIN1 ) +INPUT_PORTS_END + + static INPUT_PORTS_START( doncdoon ) + PORT_START("P1") + PORT_START("P1_ANALOG_X") + PORT_START("P1_ANALOG_Y") + PORT_START("P2") + PORT_START("P2_ANALOG_X") + PORT_START("P2_ANALOG_Y") + + PORT_START("IN0") + PORT_BIT(0xfcff8080, IP_ACTIVE_LOW, IPT_UNUSED ) + PORT_DIPNAME( 0x02000000, 0x02000000, "DIP SW2" ) + PORT_DIPSETTING( 0x02000000, DEF_STR( Off ) ) + PORT_DIPSETTING( 0x00000000, DEF_STR( On ) ) + PORT_DIPNAME( 0x01000000, 0x01000000, "Test Mode" ) + PORT_DIPSETTING( 0x01000000, DEF_STR( Off ) ) + PORT_DIPSETTING( 0x00000000, DEF_STR( On ) ) + PORT_BIT( 0x00004000, IP_ACTIVE_LOW, IPT_BUTTON3 ) PORT_PLAYER(2) + PORT_BIT( 0x00002000, IP_ACTIVE_LOW, IPT_BUTTON2 ) PORT_PLAYER(2) + PORT_BIT( 0x00001000, IP_ACTIVE_LOW, IPT_BUTTON1 ) PORT_PLAYER(2) + PORT_BIT( 0x00000800, IP_ACTIVE_LOW, IPT_JOYSTICK_RIGHT ) PORT_PLAYER(2) + PORT_BIT( 0x00000400, IP_ACTIVE_LOW, IPT_JOYSTICK_LEFT ) PORT_PLAYER(2) + PORT_BIT( 0x00000200, IP_ACTIVE_LOW, IPT_JOYSTICK_DOWN ) PORT_PLAYER(2) + PORT_BIT( 0x00000100, IP_ACTIVE_LOW, IPT_JOYSTICK_UP ) PORT_PLAYER(2) + PORT_BIT( 0x00000040, IP_ACTIVE_LOW, IPT_BUTTON3 ) PORT_PLAYER(1) + PORT_BIT( 0x00000020, IP_ACTIVE_LOW, IPT_BUTTON2 ) PORT_PLAYER(1) + PORT_BIT( 0x00000010, IP_ACTIVE_LOW, IPT_BUTTON1 ) PORT_PLAYER(1) + PORT_BIT( 0x00000008, IP_ACTIVE_LOW, IPT_JOYSTICK_RIGHT ) PORT_PLAYER(1) + PORT_BIT( 0x00000004, IP_ACTIVE_LOW, IPT_JOYSTICK_LEFT ) PORT_PLAYER(1) + PORT_BIT( 0x00000002, IP_ACTIVE_LOW, IPT_JOYSTICK_DOWN ) PORT_PLAYER(1) + PORT_BIT( 0x00000001, IP_ACTIVE_LOW, IPT_JOYSTICK_UP ) PORT_PLAYER(1) + + PORT_START("IN1") + PORT_BIT(0xffc0ffff, IP_ACTIVE_LOW, IPT_UNUSED ) + PORT_BIT( 0x00200000, IP_ACTIVE_LOW, IPT_SERVICE ) PORT_NAME("Test Button") + PORT_BIT( 0x00100000, IP_ACTIVE_LOW, IPT_SERVICE ) PORT_NAME("Service Button") PORT_CODE(KEYCODE_7) + PORT_BIT( 0x00080000, IP_ACTIVE_LOW, IPT_COIN2 ) + PORT_BIT( 0x00040000, IP_ACTIVE_LOW, IPT_COIN1 ) + PORT_BIT( 0x00020000, IP_ACTIVE_LOW, IPT_START2 ) + PORT_BIT( 0x00010000, IP_ACTIVE_LOW, IPT_START1 ) +INPUT_PORTS_END + +static INPUT_PORTS_START( kurufev ) + PORT_INCLUDE( doncdoon ) + + PORT_MODIFY("IN0") + PORT_BIT(0x00004040, IP_ACTIVE_LOW, IPT_UNUSED ) +INPUT_PORTS_END + +static INPUT_PORTS_START( twrshaft ) + PORT_START("P1") + PORT_START("P1_ANALOG_X") + PORT_START("P1_ANALOG_Y") + PORT_START("P2") + PORT_START("P2_ANALOG_X") + PORT_START("P2_ANALOG_Y") + PORT_START("INMJ") + + PORT_START("IN0") + PORT_BIT(0xff7fffe0, IP_ACTIVE_LOW, IPT_UNUSED ) + PORT_BIT( 0x00000010, IP_ACTIVE_LOW, IPT_BUTTON1 ) PORT_PLAYER(1) + PORT_BIT( 0x00000008, IP_ACTIVE_LOW, IPT_JOYSTICK_RIGHT ) PORT_PLAYER(1) + PORT_BIT( 0x00000004, IP_ACTIVE_LOW, IPT_JOYSTICK_LEFT ) PORT_PLAYER(1) + PORT_BIT( 0x00000002, IP_ACTIVE_LOW, IPT_JOYSTICK_DOWN ) PORT_PLAYER(1) + PORT_BIT( 0x00000001, IP_ACTIVE_LOW, IPT_JOYSTICK_UP ) PORT_PLAYER(1) + PORT_DIPNAME( 0x00800000, 0x00800000, "Test Mode" ) + PORT_DIPSETTING( 0x00800000, DEF_STR( Off ) ) + PORT_DIPSETTING( 0x00000000, DEF_STR( On ) ) + + PORT_START("IN1") + PORT_BIT( 0x00200000, IP_ACTIVE_LOW, IPT_SERVICE ) PORT_NAME("Test Button") + PORT_BIT( 0x00100000, IP_ACTIVE_LOW, IPT_SERVICE ) PORT_NAME("Service Button") PORT_CODE(KEYCODE_7) + PORT_BIT( 0x00080000, IP_ACTIVE_LOW, IPT_COIN2 ) + PORT_BIT( 0x00040000, IP_ACTIVE_LOW, IPT_COIN1 ) + PORT_BIT( 0x00010000, IP_ACTIVE_LOW, IPT_START1 ) +INPUT_PORTS_END + +static INPUT_PORTS_START( hipai ) + PORT_START("P1") + PORT_START("P1_ANALOG_X") + PORT_START("P1_ANALOG_Y") + PORT_START("P2") + PORT_START("P2_ANALOG_X") + PORT_START("P2_ANALOG_Y") + +PORT_START("INMJ") + PORT_BIT( 0xe1c1c0c1, IP_ACTIVE_LOW, IPT_UNUSED ) + PORT_BIT( 0x00000100, IP_ACTIVE_LOW, IPT_START1 ) + PORT_BIT( 0x00000200, IP_ACTIVE_LOW, IPT_MAHJONG_A ) + PORT_BIT( 0x00020000, IP_ACTIVE_LOW, IPT_MAHJONG_B ) + PORT_BIT( 0x00000002, IP_ACTIVE_LOW, IPT_MAHJONG_C ) + PORT_BIT( 0x02000000, IP_ACTIVE_LOW, IPT_MAHJONG_D ) + PORT_BIT( 0x00000400, IP_ACTIVE_LOW, IPT_MAHJONG_E ) + PORT_BIT( 0x00040000, IP_ACTIVE_LOW, IPT_MAHJONG_F ) + PORT_BIT( 0x00000004, IP_ACTIVE_LOW, IPT_MAHJONG_G ) + PORT_BIT( 0x04000000, IP_ACTIVE_LOW, IPT_MAHJONG_H ) + PORT_BIT( 0x00000800, IP_ACTIVE_LOW, IPT_MAHJONG_I ) + PORT_BIT( 0x00080000, IP_ACTIVE_LOW, IPT_MAHJONG_J ) + PORT_BIT( 0x00000008, IP_ACTIVE_LOW, IPT_MAHJONG_K ) + PORT_BIT( 0x08000000, IP_ACTIVE_LOW, IPT_MAHJONG_L ) + PORT_BIT( 0x00001000, IP_ACTIVE_LOW, IPT_MAHJONG_M ) + PORT_BIT( 0x00100000, IP_ACTIVE_LOW, IPT_MAHJONG_N ) + PORT_BIT( 0x00002000, IP_ACTIVE_LOW, IPT_MAHJONG_KAN ) + PORT_BIT( 0x10000000, IP_ACTIVE_LOW, IPT_MAHJONG_PON ) + PORT_BIT( 0x00000010, IP_ACTIVE_LOW, IPT_MAHJONG_CHI ) + PORT_BIT( 0x00200000, IP_ACTIVE_LOW, IPT_MAHJONG_REACH ) + PORT_BIT( 0x00000020, IP_ACTIVE_LOW, IPT_MAHJONG_RON ) + + PORT_START("IN0") + PORT_BIT( 0x0000ffff, IP_ACTIVE_LOW, IPT_UNUSED ) + PORT_DIPNAME( 0x80000000, 0x80000000, DEF_STR( Free_Play ) ) PORT_DIPLOCATION("SW1:8") + PORT_DIPSETTING( 0x80000000, DEF_STR( Off ) ) + PORT_DIPSETTING( 0x00000000, DEF_STR( On ) ) + PORT_DIPNAME( 0x40000000, 0x40000000, DEF_STR( Unused ) ) PORT_DIPLOCATION("SW1:7") + PORT_DIPSETTING( 0x40000000, DEF_STR( Off ) ) + PORT_DIPSETTING( 0x00000000, DEF_STR( On ) ) + PORT_DIPNAME( 0x20000000, 0x20000000, DEF_STR( Unused ) ) PORT_DIPLOCATION("SW1:6") + PORT_DIPSETTING( 0x20000000, DEF_STR( Off ) ) + PORT_DIPSETTING( 0x00000000, DEF_STR( On ) ) + PORT_DIPNAME( 0x10000000, 0x10000000, DEF_STR( Unused ) ) PORT_DIPLOCATION("SW1:5") + PORT_DIPSETTING( 0x10000000, DEF_STR( Off ) ) + PORT_DIPSETTING( 0x00000000, DEF_STR( On ) ) + PORT_DIPNAME( 0x08000000, 0x08000000, DEF_STR( Unused ) ) PORT_DIPLOCATION("SW1:4") + PORT_DIPSETTING( 0x08000000, DEF_STR( Off ) ) + PORT_DIPSETTING( 0x00000000, DEF_STR( On ) ) + PORT_DIPNAME( 0x07000000, 0x07000000, DEF_STR( Coinage ) ) PORT_DIPLOCATION("SW1:1,2,3") + PORT_DIPSETTING( 0x00000000, DEF_STR( 5C_1C ) ) + PORT_DIPSETTING( 0x01000000, DEF_STR( 4C_1C ) ) + PORT_DIPSETTING( 0x02000000, DEF_STR( 3C_1C ) ) + PORT_DIPSETTING( 0x03000000, DEF_STR( 2C_1C ) ) + PORT_DIPSETTING( 0x07000000, DEF_STR( 1C_1C ) ) + PORT_DIPSETTING( 0x06000000, DEF_STR( 1C_2C ) ) + PORT_DIPSETTING( 0x05000000, DEF_STR( 1C_3C ) ) + PORT_DIPSETTING( 0x04000000, DEF_STR( 1C_4C ) ) + PORT_DIPNAME( 0x00800000, 0x00800000, DEF_STR( Test ) ) PORT_DIPLOCATION("SW2:8") + PORT_DIPSETTING( 0x00800000, DEF_STR( Off ) ) + PORT_DIPSETTING( 0x00000000, DEF_STR( On ) ) + PORT_DIPNAME( 0x00400000, 0x00400000, DEF_STR( Unused ) ) PORT_DIPLOCATION("SW2:7") + PORT_DIPSETTING( 0x00400000, DEF_STR( Off ) ) + PORT_DIPSETTING( 0x00000000, DEF_STR( On ) ) + PORT_DIPNAME( 0x00200000, 0x00000000, DEF_STR( Demo_Sounds ) ) PORT_DIPLOCATION("SW2:6") + PORT_DIPSETTING( 0x00200000, DEF_STR( Off ) ) + PORT_DIPSETTING( 0x00000000, DEF_STR( On ) ) + PORT_DIPNAME( 0x00100000, 0x00100000, DEF_STR( Allow_Continue ) ) PORT_DIPLOCATION("SW2:5") + PORT_DIPSETTING( 0x00000000, DEF_STR( Off ) ) + PORT_DIPSETTING( 0x00100000, DEF_STR( On ) ) + PORT_DIPNAME( 0x00080000, 0x00080000, "Kuitan" ) PORT_DIPLOCATION("SW2:4") + PORT_DIPSETTING( 0x00000000, DEF_STR( Off ) ) + PORT_DIPSETTING( 0x00080000, DEF_STR( On ) ) + PORT_DIPNAME( 0x00070000, 0x00070000, DEF_STR( Difficulty ) ) PORT_DIPLOCATION("SW2:1,2,3") + PORT_DIPSETTING( 0x00000000, DEF_STR( Hardest ) ) + PORT_DIPSETTING( 0x00010000, DEF_STR( Very_Hard ) ) + PORT_DIPSETTING( 0x00020000, DEF_STR( Hard ) ) + PORT_DIPSETTING( 0x00030000, "Normal+" ) + PORT_DIPSETTING( 0x00040000, DEF_STR( Easy ) ) + PORT_DIPSETTING( 0x00050000, DEF_STR( Very_Easy ) ) + PORT_DIPSETTING( 0x00060000, DEF_STR( Easiest ) ) + PORT_DIPSETTING( 0x00070000, DEF_STR( Normal ) ) + + PORT_START("IN1") + PORT_BIT( 0xffebffff, IP_ACTIVE_LOW, IPT_UNUSED ) + PORT_BIT( 0x00100000, IP_ACTIVE_LOW, IPT_SERVICE ) PORT_NAME("Service Button") PORT_CODE(KEYCODE_7) + PORT_BIT( 0x00040000, IP_ACTIVE_LOW, IPT_COIN1 ) +INPUT_PORTS_END + +static INPUT_PORTS_START( srmvs ) + PORT_INCLUDE( hipai ) + + PORT_MODIFY("IN0") + PORT_DIPNAME( 0x80000000, 0x80000000, DEF_STR( Unknown ) ) PORT_DIPLOCATION("SW1:8") + PORT_DIPSETTING( 0x80000000, DEF_STR( Off ) ) + PORT_DIPSETTING( 0x00000000, DEF_STR( On ) ) + PORT_DIPNAME( 0x40000000, 0x40000000, DEF_STR( Unknown ) ) PORT_DIPLOCATION("SW1:7") + PORT_DIPSETTING( 0x40000000, DEF_STR( Off ) ) + PORT_DIPSETTING( 0x00000000, DEF_STR( On ) ) + PORT_DIPNAME( 0x20000000, 0x20000000, DEF_STR( Unknown ) ) PORT_DIPLOCATION("SW1:6") + PORT_DIPSETTING( 0x20000000, DEF_STR( Off ) ) + PORT_DIPSETTING( 0x00000000, DEF_STR( On ) ) + PORT_DIPNAME( 0x10000000, 0x10000000, DEF_STR( Unknown ) ) PORT_DIPLOCATION("SW1:5") + PORT_DIPSETTING( 0x10000000, DEF_STR( Off ) ) + PORT_DIPSETTING( 0x00000000, DEF_STR( On ) ) + PORT_DIPNAME( 0x08000000, 0x08000000, DEF_STR( Unknown ) ) PORT_DIPLOCATION("SW1:4") + PORT_DIPSETTING( 0x08000000, DEF_STR( Off ) ) + PORT_DIPSETTING( 0x00000000, DEF_STR( On ) ) + PORT_DIPNAME( 0x00400000, 0x00400000, DEF_STR( Unknown ) ) PORT_DIPLOCATION("SW2:7") + PORT_DIPSETTING( 0x00400000, DEF_STR( Off ) ) + PORT_DIPSETTING( 0x00000000, DEF_STR( On ) ) + PORT_DIPNAME( 0x00100000, 0x00100000, DEF_STR( Unknown ) ) PORT_DIPLOCATION("SW2:5") + PORT_DIPSETTING( 0x00100000, DEF_STR( Off ) ) + PORT_DIPSETTING( 0x00000000, DEF_STR( On ) ) + PORT_DIPNAME( 0x00080000, 0x00080000, DEF_STR( Unknown ) ) PORT_DIPLOCATION("SW2:4") + PORT_DIPSETTING( 0x00080000, DEF_STR( Off ) ) + PORT_DIPSETTING( 0x00000000, DEF_STR( On ) ) + PORT_DIPNAME( 0x00040000, 0x00040000, DEF_STR( Unknown ) ) PORT_DIPLOCATION("SW2:3") + PORT_DIPSETTING( 0x00040000, DEF_STR( Off ) ) + PORT_DIPSETTING( 0x00000000, DEF_STR( On ) ) + PORT_DIPNAME( 0x00020000, 0x00020000, DEF_STR( Unknown ) ) PORT_DIPLOCATION("SW2:2") + PORT_DIPSETTING( 0x00020000, DEF_STR( Off ) ) + PORT_DIPSETTING( 0x00000000, DEF_STR( On ) ) + PORT_DIPNAME( 0x00010000, 0x00010000, DEF_STR( Unknown ) ) PORT_DIPLOCATION("SW2:1") + PORT_DIPSETTING( 0x00010000, DEF_STR( Off ) ) + PORT_DIPSETTING( 0x00000000, DEF_STR( On ) ) +INPUT_PORTS_END + +/* ?? */ +static const mips3_config vr4300_config = +{ + 16384, /* code cache size */ + 8192, /* data cache size */ + 62500000 /* system clock */ +}; + +static MACHINE_CONFIG_START( aleck64, n64_state ) + + /* basic machine hardware */ + MCFG_CPU_ADD("maincpu", VR4300BE, 93750000) + MCFG_CPU_CONFIG(vr4300_config) + MCFG_CPU_PROGRAM_MAP(n64_map) + + MCFG_CPU_ADD("rsp", RSP, 62500000) + MCFG_CPU_CONFIG(n64_rsp_config) + MCFG_CPU_PROGRAM_MAP(rsp_map) + + MCFG_MACHINE_START( n64 ) + MCFG_MACHINE_RESET( n64 ) + + MCFG_SCREEN_ADD("screen", RASTER) + MCFG_SCREEN_REFRESH_RATE(60) + MCFG_SCREEN_VBLANK_TIME(ATTOSECONDS_IN_USEC(0)) + MCFG_SCREEN_SIZE(640, 525) + MCFG_SCREEN_VISIBLE_AREA(0, 639, 0, 239) + MCFG_SCREEN_UPDATE_STATIC(n64) + + MCFG_PALETTE_LENGTH(0x1000) + + MCFG_VIDEO_START(n64) + + MCFG_SPEAKER_STANDARD_STEREO("lspeaker", "rspeaker") + + MCFG_SOUND_ADD("dac1", DMADAC, 0) + MCFG_SOUND_ROUTE(ALL_OUTPUTS, "lspeaker", 1.0) + MCFG_SOUND_ADD("dac2", DMADAC, 0) + MCFG_SOUND_ROUTE(ALL_OUTPUTS, "rspeaker", 1.0) + + MCFG_N64_PERIPHS_ADD("rcp"); +MACHINE_CONFIG_END + +static DRIVER_INIT( aleck64 ) +{ + UINT8 *rom = machine.root_device().memregion("user2")->base(); + + rom[0x67c] = 0; + rom[0x67d] = 0; + rom[0x67e] = 0; + rom[0x67f] = 0; +} + +#define PIF_BOOTROM ROM_LOAD( "pifdata.bin", 0x0000, 0x0800, CRC(5ec82be9) SHA1(9174eadc0f0ea2654c95fd941406ab46b9dc9bdd) ) + +ROM_START( aleck64 ) + ROM_REGION32_BE( 0x800, "user1", 0 ) + ROM_LOAD( "pifdata.bin", 0x0000, 0x0800, CRC(5ec82be9) SHA1(9174eadc0f0ea2654c95fd941406ab46b9dc9bdd) ) + + ROM_REGION32_BE( 0x4000000, "user2", ROMREGION_ERASE00 ) + ROM_REGION32_BE( 0x100000, "user3", ROMREGION_ERASE00 ) + ROM_REGION32_BE( 0x80, "user4", ROMREGION_ERASE00 ) + + ROM_REGION16_BE( 0x80, "normpoint", 0 ) + ROM_LOAD( "normpnt.rom", 0x00, 0x80, CRC(e7f2a005) SHA1(c27b4a364a24daeee6e99fd286753fd6216362b4) ) + + ROM_REGION16_BE( 0x80, "normslope", 0 ) + ROM_LOAD( "normslp.rom", 0x00, 0x80, CRC(4f2ae525) SHA1(eab43f8cc52c8551d9cff6fced18ef80eaba6f05) ) +ROM_END + +ROM_START( 11beat ) + ROM_REGION32_BE( 0x800, "user1", ROMREGION_ERASE00 ) + PIF_BOOTROM + + ROM_REGION32_BE( 0x4000000, "user2", 0 ) + ROM_LOAD16_WORD_SWAP( "nus-zhaj.u3", 0x000000, 0x0800000, CRC(95258ba2) SHA1(0299b8fb9a8b1b24428d0f340f6bf1cfaf99c672) ) + + ROM_REGION16_BE( 0x80, "normpoint", 0 ) + ROM_LOAD( "normpnt.rom", 0x00, 0x80, CRC(e7f2a005) SHA1(c27b4a364a24daeee6e99fd286753fd6216362b4) ) + + ROM_REGION16_BE( 0x80, "normslope", 0 ) + ROM_LOAD( "normslp.rom", 0x00, 0x80, CRC(4f2ae525) SHA1(eab43f8cc52c8551d9cff6fced18ef80eaba6f05) ) +ROM_END + +ROM_START( mtetrisc ) + ROM_REGION32_BE( 0x800, "user1", ROMREGION_ERASE00 ) + PIF_BOOTROM + + ROM_REGION32_BE( 0x4000000, "user2", 0 ) + ROM_LOAD16_WORD_SWAP( "nus-zcaj.u4", 0x000000, 0x1000000, CRC(ec4563fc) SHA1(4d5a30873a5850cf4cd1c0bdbe24e1934f163cd0) ) + + ROM_REGION32_BE( 0x100000, "user3", 0 ) + ROM_LOAD ( "tet-01m.u5", 0x000000, 0x100000, CRC(f78f859b) SHA1(b07c85e0453869fe43792f42081f64a5327e58e6) ) + + ROM_REGION32_BE( 0x80, "user4", 0 ) + ROM_LOAD ( "at24c01.u34", 0x000000, 0x80, CRC(ba7e503f) SHA1(454aa4fdde7d8694d1affaf25cd750fa678686bb) ) + + ROM_REGION16_BE( 0x80, "normpoint", 0 ) + ROM_LOAD( "normpnt.rom", 0x00, 0x80, CRC(e7f2a005) SHA1(c27b4a364a24daeee6e99fd286753fd6216362b4) ) + + ROM_REGION16_BE( 0x80, "normslope", 0 ) + ROM_LOAD( "normslp.rom", 0x00, 0x80, CRC(4f2ae525) SHA1(eab43f8cc52c8551d9cff6fced18ef80eaba6f05) ) +ROM_END + + +/* +Star Soldier Vanishing Earth for Aleck64 +Uses standard PCB '3D ROM PCB-2A' containing... (PCB Labels in brackets) +1x Macronix MX23C9602CZ 96MBit Serial EEPROM @ U3 (NUS96M) +1x CIC-NUS-5101 Protection Chip (CIC-NUS) +1x BK4D-NUS (BU9850) +*/ + +ROM_START( starsldr ) + ROM_REGION32_BE( 0x800, "user1", ROMREGION_ERASE00 ) + PIF_BOOTROM + + ROM_REGION32_BE( 0x4000000, "user2", 0 ) + ROM_LOAD16_WORD_SWAP( "nus-zhbj-0.u3", 0x000000, 0xc00000, CRC(a4edac93) SHA1(3794606c008fb69f5d16dcccece94d03da23bf8a) ) + + ROM_REGION16_BE( 0x80, "normpoint", 0 ) + ROM_LOAD( "normpnt.rom", 0x00, 0x80, CRC(e7f2a005) SHA1(c27b4a364a24daeee6e99fd286753fd6216362b4) ) + + ROM_REGION16_BE( 0x80, "normslope", 0 ) + ROM_LOAD( "normslp.rom", 0x00, 0x80, CRC(4f2ae525) SHA1(eab43f8cc52c8551d9cff6fced18ef80eaba6f05) ) + +ROM_END + +ROM_START( srmvs ) + ROM_REGION32_BE( 0x800, "user1", ROMREGION_ERASE00 ) + PIF_BOOTROM + + ROM_REGION32_BE( 0x4000000, "user2", 0 ) + ROM_LOAD16_WORD_SWAP( "nus-zsej-0.u2", 0x000000, 0x2000000, CRC(44f40102) SHA1(a78de955f2fcd99dda14e782984368b320eb5415) ) + + ROM_REGION16_BE( 0x80, "normpoint", 0 ) + ROM_LOAD( "normpnt.rom", 0x00, 0x80, CRC(e7f2a005) SHA1(c27b4a364a24daeee6e99fd286753fd6216362b4) ) + + ROM_REGION16_BE( 0x80, "normslope", 0 ) + ROM_LOAD( "normslp.rom", 0x00, 0x80, CRC(4f2ae525) SHA1(eab43f8cc52c8551d9cff6fced18ef80eaba6f05) ) + +ROM_END + + +/* +Vivid Dolls for Aleck64 +Uses standard PCB '3D ROM PCB-2A' containing... (PCB Labels in brackets) +1x CIC-NUS-5101 Protection Chip (U1 CIC-NUS) +1x BK4D-NUS (U2 BU9850) +1x Macronix MX23C6402CZ 64MBit Serial EEPROM (U3 NUS64M) +*/ + +ROM_START( vivdolls ) + ROM_REGION32_BE( 0x800, "user1", ROMREGION_ERASE00 ) + PIF_BOOTROM + + ROM_REGION32_BE( 0x4000000, "user2", 0 ) + ROM_LOAD16_WORD_SWAP( "nus-zsaj-0.u3", 0x000000, 0x800000, CRC(f3220e29) SHA1(06d8b808cc19378b046803f4dc75c7d791b7767f) ) + + ROM_REGION16_BE( 0x80, "normpoint", 0 ) + ROM_LOAD( "normpnt.rom", 0x00, 0x80, CRC(e7f2a005) SHA1(c27b4a364a24daeee6e99fd286753fd6216362b4) ) + + ROM_REGION16_BE( 0x80, "normslope", 0 ) + ROM_LOAD( "normslp.rom", 0x00, 0x80, CRC(4f2ae525) SHA1(eab43f8cc52c8551d9cff6fced18ef80eaba6f05) ) + +ROM_END + + +/* +Tower And Shaft for Aleck64 +Uses custom PCB 'ALK-ROM01 ARUZE' containing... (PCB Labels in brackets) +1x Macronix MX23C6402CZ 64MBit Serial EEPROM (U1) Note - This ROM is mostly empty. +1x Altera MAX EPM3128ATC144-10 CPLD/FPGA labelled AL01 (U2) +1x Fujitsu MSP55LV128 128MBit SOP44 FlashROM labelled UA3012-ALL02-U3 (U3) +1x BK4D-NUS BU9850 (U5) +1x CIC-NUS-5101 Protection Chip (U6) +1x 74F245 Logic Chip +Some transistors +*/ + +ROM_START( twrshaft ) + ROM_REGION32_BE( 0x800, "user1", ROMREGION_ERASE00 ) + PIF_BOOTROM + + ROM_REGION32_BE( 0x4000000, "user2", 0 ) + ROM_LOAD16_WORD_SWAP( "ua3012--all02.u3", 0x000000, 0x1000000, CRC(904a91a7) SHA1(7dfa3447d2c489c0448c4004dc12d3037c05a0f3) ) + + ROM_REGION32_BE( 0x800000, "user3", 0 ) + ROM_LOAD16_WORD_SWAP( "nus-zsij-0.u1", 0x000000, 0x800000, CRC(2389576f) SHA1(dc22b2eab4d7a02cb918827a62e6c120b3a84e6c) ) + + ROM_REGION16_BE( 0x80, "normpoint", 0 ) + ROM_LOAD( "normpnt.rom", 0x00, 0x80, CRC(e7f2a005) SHA1(c27b4a364a24daeee6e99fd286753fd6216362b4) ) + + ROM_REGION16_BE( 0x80, "normslope", 0 ) + ROM_LOAD( "normslp.rom", 0x00, 0x80, CRC(4f2ae525) SHA1(eab43f8cc52c8551d9cff6fced18ef80eaba6f05) ) +ROM_END + + +ROM_START( hipai ) + ROM_REGION32_BE( 0x800, "user1", ROMREGION_ERASE00 ) + PIF_BOOTROM + + ROM_REGION32_BE( 0x4000000, "user2", 0 ) + ROM_LOAD16_WORD_SWAP( "ua2011-all02.u3", 0x0000000, 0x1000000, CRC(eb4b96d0) SHA1(e909ea5b71b81087da07821c4f57244576363678) ) + ROM_LOAD16_WORD_SWAP( "ua2011-alh02.u4", 0x1000000, 0x1000000, CRC(b8e35ddf) SHA1(7c3e59f6520dc3f0aa592e682fa82e30ffd1f4d0) ) + + ROM_REGION32_BE( 0x800000, "user3", 0 ) + ROM_LOAD16_WORD_SWAP( "nus-nsij-0.u1", 0x000000, 0x800000, CRC(94cf9f8d) SHA1(cd624d1f5de2be3bec3ece06556a2e39bef66d77) ) + + ROM_REGION16_BE( 0x80, "normpoint", 0 ) + ROM_LOAD( "normpnt.rom", 0x00, 0x80, CRC(e7f2a005) SHA1(c27b4a364a24daeee6e99fd286753fd6216362b4) ) + + ROM_REGION16_BE( 0x80, "normslope", 0 ) + ROM_LOAD( "normslp.rom", 0x00, 0x80, CRC(4f2ae525) SHA1(eab43f8cc52c8551d9cff6fced18ef80eaba6f05) ) +ROM_END + + +ROM_START( kurufev ) + ROM_REGION32_BE( 0x800, "user1", ROMREGION_ERASE00 ) + PIF_BOOTROM + + ROM_REGION32_BE( 0x4000000, "user2", 0 ) + ROM_LOAD16_WORD_SWAP( "ua3088-all01.u3", 0x0000000, 0x1000000, CRC(00db4dbc) SHA1(824fdce01fffdfcbcc9b1fbda4ab389a10b2b418) ) + ROM_LOAD16_WORD_SWAP( "ua3088-alh04.u4", 0x1000000, 0x1000000, CRC(c96bc7c0) SHA1(2b6ca1a769dee74e112c2b287dacd0bf46dda091) ) + + ROM_REGION32_BE( 0x800000, "user3", 0 ) + ROM_LOAD16_WORD_SWAP( "nus-zsij-0.u1", 0x000000, 0x800000, CRC(2389576f) SHA1(dc22b2eab4d7a02cb918827a62e6c120b3a84e6c) ) // same as tower & shaft + + ROM_REGION16_BE( 0x80, "normpoint", 0 ) + ROM_LOAD( "normpnt.rom", 0x00, 0x80, CRC(e7f2a005) SHA1(c27b4a364a24daeee6e99fd286753fd6216362b4) ) + + ROM_REGION16_BE( 0x80, "normslope", 0 ) + ROM_LOAD( "normslp.rom", 0x00, 0x80, CRC(4f2ae525) SHA1(eab43f8cc52c8551d9cff6fced18ef80eaba6f05) ) +ROM_END + +ROM_START( doncdoon ) + ROM_REGION32_BE( 0x800, "user1", ROMREGION_ERASE00 ) + PIF_BOOTROM + + ROM_REGION32_BE( 0x4000000, "user2", 0 ) + ROM_LOAD16_WORD_SWAP( "ua3003-all01.u3", 0x0000000, 0x1000000, CRC(f362fa82) SHA1(4f41ee23edc18110be1218ba333d1c58376ab175) ) + ROM_LOAD16_WORD_SWAP( "ua3003-alh01.u4", 0x1000000, 0x1000000, CRC(47c56387) SHA1(c8cc6c0a456b593aef711d0a75b2342ba2f8203f) ) + + ROM_REGION32_BE( 0x800000, "user3", 0 ) + ROM_LOAD16_WORD_SWAP( "nus-zsij-0.u1", 0x000000, 0x800000, CRC(547d8122) SHA1(347f0785767265acb0f0c21646e06cbe6f561821) ) + + ROM_REGION16_BE( 0x80, "normpoint", 0 ) + ROM_LOAD( "normpnt.rom", 0x00, 0x80, CRC(e7f2a005) SHA1(c27b4a364a24daeee6e99fd286753fd6216362b4) ) + + ROM_REGION16_BE( 0x80, "normslope", 0 ) + ROM_LOAD( "normslp.rom", 0x00, 0x80, CRC(4f2ae525) SHA1(eab43f8cc52c8551d9cff6fced18ef80eaba6f05) ) +ROM_END + + +ROM_START( mayjin3 ) + ROM_REGION32_BE( 0x800, "user1", ROMREGION_ERASE00 ) + PIF_BOOTROM + + ROM_REGION32_BE( 0x4000000, "user2", 0 ) + ROM_LOAD16_WORD_SWAP( "nus-zscj.u3", 0x000000, 0x800000, CRC(8b36eb91) SHA1(179745625c16c6813d5f8d29bfd7628783d55806) ) + + ROM_REGION16_BE( 0x80, "normpoint", 0 ) + ROM_LOAD( "normpnt.rom", 0x00, 0x80, CRC(e7f2a005) SHA1(c27b4a364a24daeee6e99fd286753fd6216362b4) ) + + ROM_REGION16_BE( 0x80, "normslope", 0 ) + ROM_LOAD( "normslp.rom", 0x00, 0x80, CRC(4f2ae525) SHA1(eab43f8cc52c8551d9cff6fced18ef80eaba6f05) ) + +ROM_END + + + + +// BIOS +GAME( 1998, aleck64, 0, aleck64, aleck64, aleck64, ROT0, "Nintendo / Seta", "Aleck64 PIF BIOS", GAME_IS_BIOS_ROOT) + +// games +GAME( 1998, 11beat, aleck64, aleck64, 11beat, aleck64, ROT0, "Hudson", "Eleven Beat", GAME_NOT_WORKING|GAME_NO_SOUND ) +GAME( 1998, mtetrisc, aleck64, aleck64, mtetrisc, aleck64, ROT0, "Capcom", "Magical Tetris Challenge (981009 Japan)", GAME_NOT_WORKING|GAME_IMPERFECT_GRAPHICS ) +GAME( 1998, starsldr, aleck64, aleck64, starsldr, aleck64, ROT0, "Hudson / Seta", "Star Soldier: Vanishing Earth", GAME_IMPERFECT_GRAPHICS ) +GAME( 1998, vivdolls, aleck64, aleck64, aleck64, aleck64, ROT0, "Visco", "Vivid Dolls", GAME_IMPERFECT_GRAPHICS ) +GAME( 1999, srmvs, aleck64, aleck64, srmvs, aleck64, ROT0, "Seta", "Super Real Mahjong VS", GAME_NOT_WORKING|GAME_IMPERFECT_GRAPHICS ) +GAME( 2003, twrshaft, aleck64, aleck64, twrshaft, aleck64, ROT0, "Aruze", "Tower & Shaft", GAME_NOT_WORKING|GAME_IMPERFECT_GRAPHICS ) +GAME( 2003, hipai, aleck64, aleck64, hipai, aleck64, ROT0, "Aruze / Seta", "Hi Pai Paradise", GAME_NOT_WORKING|GAME_IMPERFECT_GRAPHICS ) +GAME( 2003, doncdoon, aleck64, aleck64, doncdoon, aleck64, ROT0, "Aruze", "Hanabi de Doon! - Don-chan Puzzle", GAME_NOT_WORKING|GAME_IMPERFECT_GRAPHICS ) +GAME( 2003, kurufev, aleck64, aleck64, kurufev, aleck64, ROT0, "Aruze / Takumi", "Kurukuru Fever", GAME_NOT_WORKING|GAME_IMPERFECT_GRAPHICS ) +GAME( 2000, mayjin3, aleck64, aleck64, aleck64, aleck64, ROT0, "Seta / Able Corporation", "Mayjinsen 3", GAME_NOT_WORKING|GAME_NO_SOUND ) + |