diff options
Diffstat (limited to 'src/mess/drivers/softbox.c')
-rw-r--r-- | src/mess/drivers/softbox.c | 106 |
1 files changed, 53 insertions, 53 deletions
diff --git a/src/mess/drivers/softbox.c b/src/mess/drivers/softbox.c index 994d803a62a..b8d232db107 100644 --- a/src/mess/drivers/softbox.c +++ b/src/mess/drivers/softbox.c @@ -5,81 +5,81 @@ http://mikenaberezny.com/hardware/pet-cbm/sse-softbox-z80-computer/ - Using the Corvus hard disk - -------------------------- + Using the Corvus hard disk + -------------------------- - The SoftBox distribution disk (softbox-distrib.d80) is configured for - a CBM 8050 as CP/M drives A/B and a 10MB Corvus hard disk as drives C/D. + The SoftBox distribution disk (softbox-distrib.d80) is configured for + a CBM 8050 as CP/M drives A/B and a 10MB Corvus hard disk as drives C/D. - Use the CHDMAN utility to create a 10MB hard disk image for the Corvus: + Use the CHDMAN utility to create a 10MB hard disk image for the Corvus: - $ chdman createhd -o /path/to/corvus10mb.chd -chs 358,3,20 -ss 512 + $ chdman createhd -o /path/to/corvus10mb.chd -chs 358,3,20 -ss 512 - Start the SoftBox emulator with the floppy and hard disk images mounted: + Start the SoftBox emulator with the floppy and hard disk images mounted: - $ mess softbox -flop1 /path/to/softbox-distrib.d80 \ - -hard1 /path/to/corvus10mb.chd + $ mess softbox -flop1 /path/to/softbox-distrib.d80 \ + -hard1 /path/to/corvus10mb.chd - Before the Corvus can be used under CP/M, it must be prepared - by running DIAG.COM and FORMAT.COM. + Before the Corvus can be used under CP/M, it must be prepared + by running DIAG.COM and FORMAT.COM. - DIAG.COM + DIAG.COM - Enter "diag" (no arguments) at the CP/M prompt to run the Corvus diagnostics - program. This program will perform the Corvus low-level format. + Enter "diag" (no arguments) at the CP/M prompt to run the Corvus diagnostics + program. This program will perform the Corvus low-level format. - Select option 6 (Update Controller Code) at the menu. - Enter "corvb184.fmt" when prompted for the filename. - Enter "y" at the confirmation prompts. - Enter "1" for the Corvus drive number (two prompts). - After formatting is complete, it will return to the menu. + Select option 6 (Update Controller Code) at the menu. + Enter "corvb184.fmt" when prompted for the filename. + Enter "y" at the confirmation prompts. + Enter "1" for the Corvus drive number (two prompts). + After formatting is complete, it will return to the menu. - Select option 3 (Read Controller Code Version #) at the menu. - Enter "1" for the Corvus drive number. - It should report "V18.4AP" and then return to the menu. + Select option 3 (Read Controller Code Version #) at the menu. + Enter "1" for the Corvus drive number. + It should report "V18.4AP" and then return to the menu. - Select option 9 to return to CP/M. + Select option 9 to return to CP/M. - FORMAT.COM + FORMAT.COM - Enter "format" (no arguments) at the CP/M prompt to run the SoftBox disk - format program. This program will perform the CP/M filesystem format. + Enter "format" (no arguments) at the CP/M prompt to run the SoftBox disk + format program. This program will perform the CP/M filesystem format. - Enter drive letter "c" at the prompt. - Enter "y" to confirm the format. - After formatting is complete, it will prompt for a drive letter again. + Enter drive letter "c" at the prompt. + Enter "y" to confirm the format. + After formatting is complete, it will prompt for a drive letter again. - Enter drive letter "d" at the prompt. - Enter "y" to confirm the format. - After formatting is complete, it will prompt for a drive letter again. + Enter drive letter "d" at the prompt. + Enter "y" to confirm the format. + After formatting is complete, it will prompt for a drive letter again. - Press RETURN to return to CP/M. + Press RETURN to return to CP/M. - STAT.COM + STAT.COM - After all steps are completed, drives C and D should be usable from - CP/M. Each drive is one half of the Corvus 10MB disk. Running the - command "stat c: dsk:" should show 4712 kilobyte drive capacity. - Drive D should show the same information. + After all steps are completed, drives C and D should be usable from + CP/M. Each drive is one half of the Corvus 10MB disk. Running the + command "stat c: dsk:" should show 4712 kilobyte drive capacity. + Drive D should show the same information. - Using other Corvus hard disk sizes - ---------------------------------- + Using other Corvus hard disk sizes + ---------------------------------- - The SoftBox supports 5, 10, and 20 MB hard disks. The distribution disk - is configured for 10 MB as explained above. To use other sizes, make - a new image with CHDMAN. See the top of src/mess/includes/corvushd.h - for the parameters for the other drives. + The SoftBox supports 5, 10, and 20 MB hard disks. The distribution disk + is configured for 10 MB as explained above. To use other sizes, make + a new image with CHDMAN. See the top of src/mess/includes/corvushd.h + for the parameters for the other drives. - After the image has been created and the SoftBox emulator started with - it mounted, the SoftBox BIOS needs to be told what size Corvus hard - disk is attached. Use the NEWSYS.COM utility to reconfigure the drive - size. When NEWSYS prompts for a source drive, enter "a" (the drive letter - of the CP/M distribution disk). Use option "d" (Disk drive assignment) - to reconfigure the Corvus size. After the change has been made, use option - "s" (Save new system) to write the configuration to the floppy (drive A) and - option "e" (Execute new system) to restart CP/M with the configuration. - DIAG.COM and FORMAT.COM can then be used to format the hard disk. + After the image has been created and the SoftBox emulator started with + it mounted, the SoftBox BIOS needs to be told what size Corvus hard + disk is attached. Use the NEWSYS.COM utility to reconfigure the drive + size. When NEWSYS prompts for a source drive, enter "a" (the drive letter + of the CP/M distribution disk). Use option "d" (Disk drive assignment) + to reconfigure the Corvus size. After the change has been made, use option + "s" (Save new system) to write the configuration to the floppy (drive A) and + option "e" (Execute new system) to restart CP/M with the configuration. + DIAG.COM and FORMAT.COM can then be used to format the hard disk. */ |