summaryrefslogtreecommitdiffstatshomepage
path: root/src/mess/drivers/fanucs15.c
diff options
context:
space:
mode:
Diffstat (limited to 'src/mess/drivers/fanucs15.c')
-rw-r--r--src/mess/drivers/fanucs15.c680
1 files changed, 339 insertions, 341 deletions
diff --git a/src/mess/drivers/fanucs15.c b/src/mess/drivers/fanucs15.c
index 8984fa3cf93..a2018291099 100644
--- a/src/mess/drivers/fanucs15.c
+++ b/src/mess/drivers/fanucs15.c
@@ -2,306 +2,306 @@
// copyright-holders:R. Belmont
/***************************************************************************
- Fanuc System 15
-
- 2014-01-04 Skeleton driver.
-
- This is a circa-1990 CNC machine with a very custom GUI, made of a
- bunch of boards plugged into a passive backplane.
-
- Possible boards include:
- A16B-2200-0020/04B : Base 2 Board (contains 12 MHz 68020 "CNC CPU" and 1 or 2 MB of DRAM)
- A16B-2200-0090/07A : Digital Servo 4-Axis Controller Board (no ROMs on this board)
- A16B-2200-0121/06C : Base 0 Board (1 ROM location but position is empty. -0120 has 6081 001A)
-
- A16B-2200-0131/11B : Base 1 Board (15 ROMs on this board, 4040, 9030, AB02)
- See detailed layout and description below.
-
- A16B-2200-0150/03A : Conversational Board (4 ROMs on this board, 5A00, probably for Mill)
- or
- A16B-2200-0150/03A : Conversational Board (4 ROMs on this board, 5C30. 5C for 2 axis Lathe)
- or
- A16B-2200-0150/03A : Conversational Board (4 ROMs on this board, 5D30. 5D for 4 axis (twin Turret) lathe)
- Fanuc FBI-A MB605111 (QFP100)
- MB1422A (DIP42 - DRAM Controller)
- 51256-10 (x18)
- MB89259A (SOP28)
- Intel 80286-8
- Intel 80287-8
- MBL82288-8 (DIP10)
- uPB8284 (DIP18)
- 24MHz & 32MHz OSC's
- 4 EPROMs
-
- A16B-2200-0160/07B : Graphic Board (3 ROMs on this board, 6082 001A, 600B 001D, 600B 002D. 600B is for Mill)
- or
- A16B-2200-0160/07B : Graphic Board (3 ROMs on this board, 6082 001A, 600A 001C, 600A 001D. 600A is for Lathe)
- Fanuc FBI-A MB605111 (QFP100)
- HD68HC000P10 (68000 @10MHz, PLCC68)
- HM62256-10 (x2)
- HM53461-12 (x3)
- HD63484 (PLCC68)
- HD6445 (PLCC44)
- Fanuc GBC MB652147 (PGA135)
- MB81464-12 (x12)
- 20MHz OSC
- 3 EPROMs. 6082 is common to both mills and lathes.
- 600A is a known EPROM version required for lathes with FAPT conversational graphics.
- 600B is unknown. Possibly for mills with FAPT.
-
- A20B-1003-0230/09C : Motherboard (dumb backplane, contains only slots)
- A20B-1003-0500/01A : Additional Graphic Board for 15TTF only (for TT, connects to A16B-2200-0160 Board. No info on this PCB)
- A20B-1003-0240/07B : Connector Assembly Unit / IO Board
- A20B-1003-0580/01A : PMC Cassette C (16000 Step + Pascal 128KB, small PCB in a yellow plastic box, contains just 2 EPROMs)
-
-
- Fanuc System 15A Base 1 Board A16B-2200-013
-
- PCB Layout
- ----------
-
- A16B-2200-0131/03B (note 1 and 03B have been added/printed later)
- |--------------| |---|
- |------| CA34 |-----|CA4|-------------------------------------|
- | |--------------|75463|---| LL LL MB81C79A|
- | (x6) LL LL |--------| |
- | HM53461(x5)|MB605117| |
- | FA8191 | | |
- |4040002E.M27 4040001E.M23 FA8191 | | |
- | |--------| |
- | |
- | MC-122-41256A9A-12 |--------| |
- |AB02142A.K27 AB02141A.K23 MC-122-41256A9A-12 |MB661128| |
- | 9030001E.J18 | | |
- | | | |
- | |--------| |
- |AB02102A.H27 AB02101A.H23 |
- | |
- | |
- | |
- |AB020C2A.F27 AB020C1A.F23 24MHz |
- | |
- | |
- | |--------| |
- |AB02082A.E27 AB02081A.E23 |------| |MB605111| |
- | |68000 | | | |
- | | | | | |
- | |---------| | | |--------| |
- | |---------| |------| |
- | CNM1 |-----------------------| |
- |------------------------------------------| CNA |--|
- |-----------------------|
- Notes:
- MC-122-41256- NEC MC-122-41256A9A-12 256k RAM SIP module (with parity) containing NEC D41256L-12 32k x8 SRAM
- 2 SIP modules populated, 9 chips per module, 18 total RAMs, total 512k
- 68000 - Hitachi HD68HC000-12 68000 CPU. Clock 24/2 (PLCC68)
- MB661128 - Fujitsu Fanuc SLC01 MB661128 (Serial Data Link Controller, PLCC68)
- MB605117 - Fujitsu Fanuc BOC MB605117U (DRAM/SRAM Interface Controller, QFP100)
- MB605111 - Fujitsu Fanuc FBI-A MB605111 (Global/Local Interface Controller, QFP100)
- HM53461 - Hitachi HM53461-12 64k x4-bit multiport CMOS video RAM (x5, SOJ24)
- MB81C79A - Fujitsu MB81C79A-35 8k x 9-bit (72k) CMOS Static RAM (SOP28)
- FA8191 - Fanuc FA8191 RV07 custom ceramic module (contains resistors and transistors, SIL16)
- 75463 - Texas Instruments SN75463 Dual High-Voltage, High-Current Peripheral Driver (DIP8)
- L - LED
- CA34 - Connector for PMC Cassette C A02B-0094-C103 (holds 2 EPROMs containing the PMC Ladder)
- The Ladder is specific and unique to each CNC machine, depending on capability and options.
- CA4 - Connector for cable joined to Servo Control Board A16B-2200-0090 or 16B-2200-0091
- CNA - Connector plugs into motherboard slot CNA2 (BASE 1)
- CNM1 - 40 pin flat cable joined to optional board A16B-1600-0280/02A
-
- Note about EPROMs:
- Software Series is denoted by the first 4 digits
- ROM # (possibly relating to the memory location in hex) is the next 3 digits
- Software Revision is the last letter
- Both IC locations and ROM # are printed on this board
-
- ROM IC Memory EPROM Used
- Label Location Location Type For...
- -----------------------------------------------------------------------------------------
- 9030001E J18 381 27256 Digital Servo Control Program Version 9030 Revision E
-
- 4040001E M23 001 27C1001 PMC Control Program Version 4040 Revision E
- 4040002E M27 002 27C1001
-
- AB02081A E23 081 27C1001 Boot Software Version AB02 Revision A
- AB02082A E27 082 27C1001
- AB020C1A F23 0C1 27C1001
- AB020C2A F27 0C2 27C1001
- AB02101A H23 101 27C1001
- AB02102A H27 102 27C1001
- AB02141A K23 141 27C1001
- AB02142A K27 142 27C1001
-
-
- Another identical board from a different machine contains the following EPROMs....
- 9030001F (known revisions exist up to at least rev M)
- 4040001D, 4040002D (known revisions exist up to at least rev I)
- A202081G, A202082G
- A2020C1G, A2020C2G
- A202101G, A202102G
-
- The complete boot software series is listed below:
-
- 15TA SOFTWARE SERIES (Single Turret 2 Axis Lathe)
- |------+----+---------+---+---+---+---|
- |S/W |STEP| CRT |I/O|SER|SER|DNC|
- |SERIES| | | | | | |
- | |1 2| 9M 14 9C|LNK|SPN|FB |1 2|
- +------+----+---------+---+---+---+---+
- |A201 |X | X | | | | |
- |A202 |X | X | | | | |
- |A211 | X| X | X | X | |X |
- |A212 | X| X | X | X | |X |
- |A219 | X| X | X | X | X | |
- |A220 | X| X | X | X | X | |
- |A215 | X| X | X | X | | X|
- |A216 | X| X | X | X | | X|
- |A217 | X| X | X | X | X | X|
- |A218 | X| X | X | X | X | X|
- |A221 | X| X | X | X | ? | ?|
- |------+----+---------+---+---+---+---|
- Notes:
- 9M - 9" Monochrome
- 9C - 9" Color
- 14 - 14" Color
- SER SPN - Serial Spindle
- SER FB - Serial FB ?
- DNC 1/2 - DNC (Direct NC) type 1 or type 2 for Direct PC to CNC program transfer operation
-
-
- 15TTA SOFTWARE SERIES (Twin Turret 4 Axis Lathe)
- |------+----+---------+---+---+---+---|
- |S/W |STEP| CRT |I/O|SER|SER|DNC|
- |SERIES| | | | | | |
- | |1 2| 9M 14 9C|LNK|SPN|FB |1 2|
- +------+----+---------+---+---+---+---+
- |A401 |X | X | | | | |
- |A402 |X | X | | | | |
- |A411 | X| X | X | X | |X |
- |A412 | X| X | X | X | |X |
- |A419 | X| X | X | X | X | |
- |A420 | X| X | X | X | X | |
- |------+----+---------+---+---+---+---|
-
-
- 15TTF SOFTWARE SERIES (Twin Turret 4 Axis Lathe with FAPT)
- |------+----+---------+---+---+---+---|
- |S/W |STEP| CRT |I/O|SER|SER|DNC|
- |SERIES| | | | | | |
- | |1 2| 9M 14 9C|LNK|SPN|FB |1 2|
- +------+----+---------+---+---+---+---+
- |A502 |X | X | | | | |
- |A512 | X| X | X | X | |X |
- |A520 | X| X | X | X | X | |
- |------+----+---------+---+---+---+---|
-
-
- 15MA SOFTWARE SERIES (Mill With 3 Axes minimum XYZ)
- |------+----+---------+---+---+---+---|---|
- |S/W |STEP| CRT |I/O|SER|SER|DNC|SUB|
- |SERIES| | | | | | | |
- | |1 2| 9M 14 9C|LNK|SPN|FB |1 2|CPU|
- +------+----+---------+---+---+---+---+---|
- |A001 |X | X | | | | | |
- |A002 |X | X | | | | | |
- |A00A |X | X | | | | | |
- |A00B |X | X | | | | | |
- |AA01 |X | X | | | | | X |
- |AA02 |X | X | | | | | X |
- |A011 | X| X | X | X | |X | |
- |A012 | X| X | X | X | |X | |
- |AA11 | X| X | X | X | |X | X |
- |AA12 | X| X | X | X | |X | X |
- |A017 | X| X | X | X | X | X| |
- |A018 | X| X | X | X | X | X| |
- |A019 | X| X | X | X | X | | |
- |A01A | X| X | X | X | |X | |
- |A01B | X| X | X | X | |X | |
- |A020 | X| X | X | X | X | | |
- |A021 | X| X| X | X | X | ?| |
- |A027 (NEW STANDARD) | | | | | |
- |A028 (NEW STANDARD) | | | | | |
- |A041 (FOR OSI ONLY) | | | | | |
- |A042 (FOR OSI ONLY) | | | | | |
- |AA19 | X| X | X | X | X | | X |
- |AA20 | X| X | X | X | X | | X |
- |AA13 | X| X | X | X | X | X| X |
- |AA14 | X| X | X | X | X | X| X |
- |AA23 | X| X | X | X | X | | X |
- |AA24 | X| X | X | X | X | | X |
- |AA26 | X| X | X | X | X | ?| X |
- |AA27 (NEW STD) | | | | | |
- |AA28 (NEW STD) | | | | | |
- |AA41 (FOR OSI ONLY) | | | | | |
- |AA42 (FOR OSI ONLY) | | | | | |
- |---------------------+---+---+---+---+---|
-
-
- Optional PCB A16B-1600-0280/02A
- -------------------------------
-
- |---------------------------|
- | 181 182 |
- | |
- | |
- | |
- | 1C1 1C2 |
- | |
- | |
- | |
- | 201 202 |
- | |
- | |
- | |
- | 241 242 |
- | |
- | |
- | |
- | 281 282 |
- | |
- | |
- | |
- | 2C1 2C2 |
- | |
- | |
- | |---------| |
- | |---------| |
- | CNM1 |
- |---------------------------|
- Notes:
- The A16B-1600-0280/02A board contains only 12 DIP32 sockets and some logic and
- bolts to the back of the BASE 1 board. The board extends the boot software memory
- storage space if additional EPROMS are required. Not all sockets are populated.
- Connector CNM1 joins with a 40 pin flat cable to the BASE 1 board connector CNM1
- IC locations are not printed on this board. Only the ROM # is printed at each
- socket location.
-
- ROM IC Memory EPROM Used For
- Label Location Location Type
- ---------------------------------------------------------------------------------
- AB02281A N/A 281 27C1001 Boot Software Version AB02 Revision A
- AB02282A N/A 282 27C1001
- AB022C1A N/A 2C1 27C1001
- AB022C2A N/A 2C2 27C1001
-
-
- 15A EPROM population and option type
- ----------------+---------+-------------------------------------------
- PCB NAME |ROM # | Option Type (Basic, Option A1/A2/A3 etc)
- ----------------|---------+-------------------------------------------
- BASE 1 main |081, 082 | B
- BASE 1 main |0C1, 0C2 | B
- BASE 1 main |101, 102 | A1 if step1 software, B if step2 software
- BASE 1 main |141, 142 | A2 (only used for foreign language option)
- BASE 1 daughter |181, 182 | A3 (if used)
- BASE 1 daughter |1C1, 1C2 | not used
- BASE 1 daughter |201, 202 | not used
- BASE 1 daughter |241, 242 | A6 (if used)
- BASE 1 daughter |281, 282 | B when subcpu used
- BASE 1 daughter |2C1, 2C2 | B when subcpu used
- --------------------------+-------------------------------------------
- Note: 2 MEG DRAM is required on BASE2 PCB when A3 or A6 is used
-
+ Fanuc System 15
+
+ 2014-01-04 Skeleton driver.
+
+ This is a circa-1990 CNC machine with a very custom GUI, made of a
+ bunch of boards plugged into a passive backplane.
+
+ Possible boards include:
+ A16B-2200-0020/04B : Base 2 Board (contains 12 MHz 68020 "CNC CPU" and 1 or 2 MB of DRAM)
+ A16B-2200-0090/07A : Digital Servo 4-Axis Controller Board (no ROMs on this board)
+ A16B-2200-0121/06C : Base 0 Board (1 ROM location but position is empty. -0120 has 6081 001A)
+
+ A16B-2200-0131/11B : Base 1 Board (15 ROMs on this board, 4040, 9030, AB02)
+ See detailed layout and description below.
+
+ A16B-2200-0150/03A : Conversational Board (4 ROMs on this board, 5A00, probably for Mill)
+ or
+ A16B-2200-0150/03A : Conversational Board (4 ROMs on this board, 5C30. 5C for 2 axis Lathe)
+ or
+ A16B-2200-0150/03A : Conversational Board (4 ROMs on this board, 5D30. 5D for 4 axis (twin Turret) lathe)
+ Fanuc FBI-A MB605111 (QFP100)
+ MB1422A (DIP42 - DRAM Controller)
+ 51256-10 (x18)
+ MB89259A (SOP28)
+ Intel 80286-8
+ Intel 80287-8
+ MBL82288-8 (DIP10)
+ uPB8284 (DIP18)
+ 24MHz & 32MHz OSC's
+ 4 EPROMs
+
+ A16B-2200-0160/07B : Graphic Board (3 ROMs on this board, 6082 001A, 600B 001D, 600B 002D. 600B is for Mill)
+ or
+ A16B-2200-0160/07B : Graphic Board (3 ROMs on this board, 6082 001A, 600A 001C, 600A 001D. 600A is for Lathe)
+ Fanuc FBI-A MB605111 (QFP100)
+ HD68HC000P10 (68000 @10MHz, PLCC68)
+ HM62256-10 (x2)
+ HM53461-12 (x3)
+ HD63484 (PLCC68)
+ HD6445 (PLCC44)
+ Fanuc GBC MB652147 (PGA135)
+ MB81464-12 (x12)
+ 20MHz OSC
+ 3 EPROMs. 6082 is common to both mills and lathes.
+ 600A is a known EPROM version required for lathes with FAPT conversational graphics.
+ 600B is unknown. Possibly for mills with FAPT.
+
+ A20B-1003-0230/09C : Motherboard (dumb backplane, contains only slots)
+ A20B-1003-0500/01A : Additional Graphic Board for 15TTF only (for TT, connects to A16B-2200-0160 Board. No info on this PCB)
+ A20B-1003-0240/07B : Connector Assembly Unit / IO Board
+ A20B-1003-0580/01A : PMC Cassette C (16000 Step + Pascal 128KB, small PCB in a yellow plastic box, contains just 2 EPROMs)
+
+
+ Fanuc System 15A Base 1 Board A16B-2200-013
+
+ PCB Layout
+ ----------
+
+ A16B-2200-0131/03B (note 1 and 03B have been added/printed later)
+ |--------------| |---|
+ |------| CA34 |-----|CA4|-------------------------------------|
+ | |--------------|75463|---| LL LL MB81C79A|
+ | (x6) LL LL |--------| |
+ | HM53461(x5)|MB605117| |
+ | FA8191 | | |
+ |4040002E.M27 4040001E.M23 FA8191 | | |
+ | |--------| |
+ | |
+ | MC-122-41256A9A-12 |--------| |
+ |AB02142A.K27 AB02141A.K23 MC-122-41256A9A-12 |MB661128| |
+ | 9030001E.J18 | | |
+ | | | |
+ | |--------| |
+ |AB02102A.H27 AB02101A.H23 |
+ | |
+ | |
+ | |
+ |AB020C2A.F27 AB020C1A.F23 24MHz |
+ | |
+ | |
+ | |--------| |
+ |AB02082A.E27 AB02081A.E23 |------| |MB605111| |
+ | |68000 | | | |
+ | | | | | |
+ | |---------| | | |--------| |
+ | |---------| |------| |
+ | CNM1 |-----------------------| |
+ |------------------------------------------| CNA |--|
+ |-----------------------|
+ Notes:
+ MC-122-41256- NEC MC-122-41256A9A-12 256k RAM SIP module (with parity) containing NEC D41256L-12 32k x8 SRAM
+ 2 SIP modules populated, 9 chips per module, 18 total RAMs, total 512k
+ 68000 - Hitachi HD68HC000-12 68000 CPU. Clock 24/2 (PLCC68)
+ MB661128 - Fujitsu Fanuc SLC01 MB661128 (Serial Data Link Controller, PLCC68)
+ MB605117 - Fujitsu Fanuc BOC MB605117U (DRAM/SRAM Interface Controller, QFP100)
+ MB605111 - Fujitsu Fanuc FBI-A MB605111 (Global/Local Interface Controller, QFP100)
+ HM53461 - Hitachi HM53461-12 64k x4-bit multiport CMOS video RAM (x5, SOJ24)
+ MB81C79A - Fujitsu MB81C79A-35 8k x 9-bit (72k) CMOS Static RAM (SOP28)
+ FA8191 - Fanuc FA8191 RV07 custom ceramic module (contains resistors and transistors, SIL16)
+ 75463 - Texas Instruments SN75463 Dual High-Voltage, High-Current Peripheral Driver (DIP8)
+ L - LED
+ CA34 - Connector for PMC Cassette C A02B-0094-C103 (holds 2 EPROMs containing the PMC Ladder)
+ The Ladder is specific and unique to each CNC machine, depending on capability and options.
+ CA4 - Connector for cable joined to Servo Control Board A16B-2200-0090 or 16B-2200-0091
+ CNA - Connector plugs into motherboard slot CNA2 (BASE 1)
+ CNM1 - 40 pin flat cable joined to optional board A16B-1600-0280/02A
+
+ Note about EPROMs:
+ Software Series is denoted by the first 4 digits
+ ROM # (possibly relating to the memory location in hex) is the next 3 digits
+ Software Revision is the last letter
+ Both IC locations and ROM # are printed on this board
+
+ ROM IC Memory EPROM Used
+ Label Location Location Type For...
+ -----------------------------------------------------------------------------------------
+ 9030001E J18 381 27256 Digital Servo Control Program Version 9030 Revision E
+
+ 4040001E M23 001 27C1001 PMC Control Program Version 4040 Revision E
+ 4040002E M27 002 27C1001
+
+ AB02081A E23 081 27C1001 Boot Software Version AB02 Revision A
+ AB02082A E27 082 27C1001
+ AB020C1A F23 0C1 27C1001
+ AB020C2A F27 0C2 27C1001
+ AB02101A H23 101 27C1001
+ AB02102A H27 102 27C1001
+ AB02141A K23 141 27C1001
+ AB02142A K27 142 27C1001
+
+
+ Another identical board from a different machine contains the following EPROMs....
+ 9030001F (known revisions exist up to at least rev M)
+ 4040001D, 4040002D (known revisions exist up to at least rev I)
+ A202081G, A202082G
+ A2020C1G, A2020C2G
+ A202101G, A202102G
+
+ The complete boot software series is listed below:
+
+ 15TA SOFTWARE SERIES (Single Turret 2 Axis Lathe)
+ |------+----+---------+---+---+---+---|
+ |S/W |STEP| CRT |I/O|SER|SER|DNC|
+ |SERIES| | | | | | |
+ | |1 2| 9M 14 9C|LNK|SPN|FB |1 2|
+ +------+----+---------+---+---+---+---+
+ |A201 |X | X | | | | |
+ |A202 |X | X | | | | |
+ |A211 | X| X | X | X | |X |
+ |A212 | X| X | X | X | |X |
+ |A219 | X| X | X | X | X | |
+ |A220 | X| X | X | X | X | |
+ |A215 | X| X | X | X | | X|
+ |A216 | X| X | X | X | | X|
+ |A217 | X| X | X | X | X | X|
+ |A218 | X| X | X | X | X | X|
+ |A221 | X| X | X | X | ? | ?|
+ |------+----+---------+---+---+---+---|
+ Notes:
+ 9M - 9" Monochrome
+ 9C - 9" Color
+ 14 - 14" Color
+ SER SPN - Serial Spindle
+ SER FB - Serial FB ?
+ DNC 1/2 - DNC (Direct NC) type 1 or type 2 for Direct PC to CNC program transfer operation
+
+
+ 15TTA SOFTWARE SERIES (Twin Turret 4 Axis Lathe)
+ |------+----+---------+---+---+---+---|
+ |S/W |STEP| CRT |I/O|SER|SER|DNC|
+ |SERIES| | | | | | |
+ | |1 2| 9M 14 9C|LNK|SPN|FB |1 2|
+ +------+----+---------+---+---+---+---+
+ |A401 |X | X | | | | |
+ |A402 |X | X | | | | |
+ |A411 | X| X | X | X | |X |
+ |A412 | X| X | X | X | |X |
+ |A419 | X| X | X | X | X | |
+ |A420 | X| X | X | X | X | |
+ |------+----+---------+---+---+---+---|
+
+
+ 15TTF SOFTWARE SERIES (Twin Turret 4 Axis Lathe with FAPT)
+ |------+----+---------+---+---+---+---|
+ |S/W |STEP| CRT |I/O|SER|SER|DNC|
+ |SERIES| | | | | | |
+ | |1 2| 9M 14 9C|LNK|SPN|FB |1 2|
+ +------+----+---------+---+---+---+---+
+ |A502 |X | X | | | | |
+ |A512 | X| X | X | X | |X |
+ |A520 | X| X | X | X | X | |
+ |------+----+---------+---+---+---+---|
+
+
+ 15MA SOFTWARE SERIES (Mill With 3 Axes minimum XYZ)
+ |------+----+---------+---+---+---+---|---|
+ |S/W |STEP| CRT |I/O|SER|SER|DNC|SUB|
+ |SERIES| | | | | | | |
+ | |1 2| 9M 14 9C|LNK|SPN|FB |1 2|CPU|
+ +------+----+---------+---+---+---+---+---|
+ |A001 |X | X | | | | | |
+ |A002 |X | X | | | | | |
+ |A00A |X | X | | | | | |
+ |A00B |X | X | | | | | |
+ |AA01 |X | X | | | | | X |
+ |AA02 |X | X | | | | | X |
+ |A011 | X| X | X | X | |X | |
+ |A012 | X| X | X | X | |X | |
+ |AA11 | X| X | X | X | |X | X |
+ |AA12 | X| X | X | X | |X | X |
+ |A017 | X| X | X | X | X | X| |
+ |A018 | X| X | X | X | X | X| |
+ |A019 | X| X | X | X | X | | |
+ |A01A | X| X | X | X | |X | |
+ |A01B | X| X | X | X | |X | |
+ |A020 | X| X | X | X | X | | |
+ |A021 | X| X| X | X | X | ?| |
+ |A027 (NEW STANDARD) | | | | | |
+ |A028 (NEW STANDARD) | | | | | |
+ |A041 (FOR OSI ONLY) | | | | | |
+ |A042 (FOR OSI ONLY) | | | | | |
+ |AA19 | X| X | X | X | X | | X |
+ |AA20 | X| X | X | X | X | | X |
+ |AA13 | X| X | X | X | X | X| X |
+ |AA14 | X| X | X | X | X | X| X |
+ |AA23 | X| X | X | X | X | | X |
+ |AA24 | X| X | X | X | X | | X |
+ |AA26 | X| X | X | X | X | ?| X |
+ |AA27 (NEW STD) | | | | | |
+ |AA28 (NEW STD) | | | | | |
+ |AA41 (FOR OSI ONLY) | | | | | |
+ |AA42 (FOR OSI ONLY) | | | | | |
+ |---------------------+---+---+---+---+---|
+
+
+ Optional PCB A16B-1600-0280/02A
+ -------------------------------
+
+ |---------------------------|
+ | 181 182 |
+ | |
+ | |
+ | |
+ | 1C1 1C2 |
+ | |
+ | |
+ | |
+ | 201 202 |
+ | |
+ | |
+ | |
+ | 241 242 |
+ | |
+ | |
+ | |
+ | 281 282 |
+ | |
+ | |
+ | |
+ | 2C1 2C2 |
+ | |
+ | |
+ | |---------| |
+ | |---------| |
+ | CNM1 |
+ |---------------------------|
+ Notes:
+ The A16B-1600-0280/02A board contains only 12 DIP32 sockets and some logic and
+ bolts to the back of the BASE 1 board. The board extends the boot software memory
+ storage space if additional EPROMS are required. Not all sockets are populated.
+ Connector CNM1 joins with a 40 pin flat cable to the BASE 1 board connector CNM1
+ IC locations are not printed on this board. Only the ROM # is printed at each
+ socket location.
+
+ ROM IC Memory EPROM Used For
+ Label Location Location Type
+ ---------------------------------------------------------------------------------
+ AB02281A N/A 281 27C1001 Boot Software Version AB02 Revision A
+ AB02282A N/A 282 27C1001
+ AB022C1A N/A 2C1 27C1001
+ AB022C2A N/A 2C2 27C1001
+
+
+ 15A EPROM population and option type
+ ----------------+---------+-------------------------------------------
+ PCB NAME |ROM # | Option Type (Basic, Option A1/A2/A3 etc)
+ ----------------|---------+-------------------------------------------
+ BASE 1 main |081, 082 | B
+ BASE 1 main |0C1, 0C2 | B
+ BASE 1 main |101, 102 | A1 if step1 software, B if step2 software
+ BASE 1 main |141, 142 | A2 (only used for foreign language option)
+ BASE 1 daughter |181, 182 | A3 (if used)
+ BASE 1 daughter |1C1, 1C2 | not used
+ BASE 1 daughter |201, 202 | not used
+ BASE 1 daughter |241, 242 | A6 (if used)
+ BASE 1 daughter |281, 282 | B when subcpu used
+ BASE 1 daughter |2C1, 2C2 | B when subcpu used
+ --------------------------+-------------------------------------------
+ Note: 2 MEG DRAM is required on BASE2 PCB when A3 or A6 is used
+
****************************************************************************/
#include "emu.h"
@@ -313,10 +313,10 @@ class fanucs15_state : public driver_device
public:
fanucs15_state(const machine_config &mconfig, device_type type, const char *tag)
: driver_device(mconfig, type, tag)
- , m_maincpu(*this, "maincpu") // main 68020
- , m_pmccpu(*this, "pmccpu") // sub 68000-12
- , m_gfxcpu(*this, "gfxcpu") // gfx 68000-10
- , m_convcpu(*this, "convcpu") // conversational 80286-8
+ , m_maincpu(*this, "maincpu") // main 68020
+ , m_pmccpu(*this, "pmccpu") // sub 68000-12
+ , m_gfxcpu(*this, "gfxcpu") // gfx 68000-10
+ , m_convcpu(*this, "convcpu") // conversational 80286-8
{ }
required_device<m68020_device> m_maincpu;
@@ -330,8 +330,8 @@ private:
static ADDRESS_MAP_START(maincpu_mem, AS_PROGRAM, 32, fanucs15_state)
AM_RANGE(0x00000000, 0x0017ffff) AM_ROM AM_REGION("base1b", 0)
- AM_RANGE(0x000f8000, 0x000fffff) AM_RAM // filled with 0x96 on boot
- AM_RANGE(0xffff0000, 0xffffffff) AM_RAM // initial stack
+ AM_RANGE(0x000f8000, 0x000fffff) AM_RAM // filled with 0x96 on boot
+ AM_RANGE(0xffff0000, 0xffffffff) AM_RAM // initial stack
ADDRESS_MAP_END
static ADDRESS_MAP_START(pmccpu_mem, AS_PROGRAM, 16, fanucs15_state)
@@ -369,57 +369,55 @@ static MACHINE_CONFIG_START( fanucs15, fanucs15_state )
MCFG_CPU_PROGRAM_MAP(pmccpu_mem)
MCFG_DEVICE_DISABLE()
- MCFG_CPU_ADD("gfxcpu", M68000, XTAL_10MHz) // wants bit 15 of 70500 to be set
+ MCFG_CPU_ADD("gfxcpu", M68000, XTAL_10MHz) // wants bit 15 of 70500 to be set
MCFG_CPU_PROGRAM_MAP(gfxcpu_mem)
MCFG_DEVICE_DISABLE()
- MCFG_CPU_ADD("convcpu", I80286, XTAL_8MHz) // wants 70500 to return 0x8000 (same as what gfxcpu looks for, basically)
+ MCFG_CPU_ADD("convcpu", I80286, XTAL_8MHz) // wants 70500 to return 0x8000 (same as what gfxcpu looks for, basically)
MCFG_CPU_PROGRAM_MAP(convcpu_mem)
MACHINE_CONFIG_END
/* ROM definition */
-ROM_START( fanucs15 )
- ROM_REGION16_BE( 0x50000, "base1a", 0 ) // 68000 sub CPU code and data on base 1 board (verified)
- ROM_LOAD16_BYTE( "4040_001e_001.23m", 0x000001, 0x020000, CRC(2e12109f) SHA1(83ed846d3d59ab0d81b2e2e2231d1a444e462590) )
- ROM_LOAD16_BYTE( "4040_002e_002.27m", 0x000000, 0x020000, CRC(a5469692) SHA1(31c44edb36fb69d3d418a97e32e4a2769d1ec9e7) )
+ROM_START( fanucs15 )
+ ROM_REGION16_BE( 0x50000, "base1a", 0 ) // 68000 sub CPU code and data on base 1 board (verified)
+ ROM_LOAD16_BYTE( "4040_001e_001.23m", 0x000001, 0x020000, CRC(2e12109f) SHA1(83ed846d3d59ab0d81b2e2e2231d1a444e462590) )
+ ROM_LOAD16_BYTE( "4040_002e_002.27m", 0x000000, 0x020000, CRC(a5469692) SHA1(31c44edb36fb69d3d418a97e32e4a2769d1ec9e7) )
ROM_LOAD16_BYTE( "9030_001e_381.18j", 0x040001, 0x008000, CRC(9f10a022) SHA1(dc4a242f7611143cc2d9564993fd5fa52f0ac13a) )
- ROM_REGION32_BE( 0x180000, "base1b", 0 ) // 68020 main CPU code and data on base 1 board (verified)
- ROM_LOAD16_BYTE( "ab02_081a_081.23e", 0x000001, 0x020000, CRC(5328b023) SHA1(661f2908f3287f7cd2b215cd29962f2789f7d99a) )
- ROM_LOAD16_BYTE( "ab02_082a_082.27e", 0x000000, 0x020000, CRC(ad37740f) SHA1(e65cc0a8b4e515fcf5fcefde99e95d100d310018) )
- ROM_LOAD16_BYTE( "ab02_0c1a_0c1.23f", 0x040001, 0x020000, CRC(62566569) SHA1(dd85b6e7875d996759b833552b00e1b3a0e3696b) )
- ROM_LOAD16_BYTE( "ab02_0c2a_0c2.27f", 0x040000, 0x020000, CRC(a4ade1fe) SHA1(44ef5358b34d3538fb061f235b8a14bac6b5faa8) )
- ROM_LOAD16_BYTE( "ab02_101a_101.23h", 0x080001, 0x020000, CRC(96f5d00e) SHA1(f5de3621df536435d27a0aac1c9d25e69601bd40) )
- ROM_LOAD16_BYTE( "ab02_102a_102.27h", 0x080000, 0x020000, CRC(e23a5414) SHA1(f6aff51dfd6d976b7cd33399c7aa3d06c7c06919) )
- ROM_LOAD16_BYTE( "ab02_141a_141.23k", 0x0c0001, 0x020000, CRC(3ceb6809) SHA1(7e37b18847b35f81c08b7b2ab62e99fa3a737c32) )
+ ROM_REGION32_BE( 0x180000, "base1b", 0 ) // 68020 main CPU code and data on base 1 board (verified)
+ ROM_LOAD16_BYTE( "ab02_081a_081.23e", 0x000001, 0x020000, CRC(5328b023) SHA1(661f2908f3287f7cd2b215cd29962f2789f7d99a) )
+ ROM_LOAD16_BYTE( "ab02_082a_082.27e", 0x000000, 0x020000, CRC(ad37740f) SHA1(e65cc0a8b4e515fcf5fcefde99e95d100d310018) )
+ ROM_LOAD16_BYTE( "ab02_0c1a_0c1.23f", 0x040001, 0x020000, CRC(62566569) SHA1(dd85b6e7875d996759b833552b00e1b3a0e3696b) )
+ ROM_LOAD16_BYTE( "ab02_0c2a_0c2.27f", 0x040000, 0x020000, CRC(a4ade1fe) SHA1(44ef5358b34d3538fb061f235b8a14bac6b5faa8) )
+ ROM_LOAD16_BYTE( "ab02_101a_101.23h", 0x080001, 0x020000, CRC(96f5d00e) SHA1(f5de3621df536435d27a0aac1c9d25e69601bd40) )
+ ROM_LOAD16_BYTE( "ab02_102a_102.27h", 0x080000, 0x020000, CRC(e23a5414) SHA1(f6aff51dfd6d976b7cd33399c7aa3d06c7c06919) )
+ ROM_LOAD16_BYTE( "ab02_141a_141.23k", 0x0c0001, 0x020000, CRC(3ceb6809) SHA1(7e37b18847b35f81c08b7b2ab62e99fa3a737c32) )
ROM_LOAD16_BYTE( "ab02_142a_142.27k", 0x0c0000, 0x020000, CRC(1d8a4d7d) SHA1(580322e2927742bbcbf0bb2757730e2817b320e1) )
// this appears to be a different version of the 081a/0c1a ROM program. it's definitely for a 68020 (32-bit pointers everywhere)
ROM_LOAD16_BYTE( "ab02_281a_281.8a", 0x100001, 0x020000, CRC(cec79742) SHA1(1233ff920d607206a80c8d187745e3d657a8635d) )
- ROM_LOAD16_BYTE( "ab02_282a_282.8d", 0x100000, 0x020000, CRC(63eacc0e) SHA1(1f25b99280112c720d778219b4610f556f33a7f1) )
- ROM_LOAD16_BYTE( "ab02_2c1a_2c1.10a", 0x140001, 0x020000, CRC(66eb74dd) SHA1(f256763cb15b4524c09bd09b88df46a1498846ef) )
- ROM_LOAD16_BYTE( "ab02_2c2a_2c2.10d", 0x140000, 0x020000, CRC(6edf4ff3) SHA1(9cbf7c6555cc27def3b580f5a7b0ff580984206d) )
-
- ROM_REGION16_LE( 0x80000, "conversational", 0 ) // 80286 ROMs, 5a00 for Mill
- ROM_LOAD16_BYTE( "5a00_041b.041", 0x000000, 0x020000, CRC(bf22c0a3) SHA1(56ab70bfd5794cb4db1d87c8becf7af522687564) )
- ROM_LOAD16_BYTE( "5a00_042b.042", 0x000001, 0x020000, CRC(7abc9d6b) SHA1(5cb6ad08ce93aa99391d1ce46ac8db8ba2e0f94a) )
- ROM_LOAD16_BYTE( "5a00_001b.001", 0x040000, 0x020000, CRC(cd2a2839) SHA1(bc20fd9ae9d071e1df835244aea85648d1bd1dbc) )
- ROM_LOAD16_BYTE( "5a00_002b.002", 0x040001, 0x020000, CRC(d9ebbb4a) SHA1(9c3d96e9b88848472210beacdf9d300ddd42d16e) )
-
- ROM_REGION16_BE( 0x50000, "gfxboard", 0 ) // graphics board 68000 code/data. 600a for lathe, 600b for mill, 6082 common to both
- ROM_LOAD16_BYTE( "600b_001d_low.3l", 0x000001, 0x010000, CRC(50566c5c) SHA1(966c8d90d09a9c50c5dedebe9c67f1755846b234) )
- ROM_LOAD16_BYTE( "600b_002d_high.3j", 0x000000, 0x010000, CRC(304e1ecb) SHA1(1e4b149b306550750fc03bd80bd399f239f68657) )
- ROM_LOAD16_BYTE( "600a_001c.bin", 0x020001, 0x010000, CRC(63d9fc2f) SHA1(280e825ba7b79e7c38282a4f4b762d2219fd873b) )
- ROM_LOAD16_BYTE( "600a_002c.bin", 0x020000, 0x010000, CRC(4d78e702) SHA1(a89bd07dc1ae030bdee5a541777825eaadbc2307) )
+ ROM_LOAD16_BYTE( "ab02_282a_282.8d", 0x100000, 0x020000, CRC(63eacc0e) SHA1(1f25b99280112c720d778219b4610f556f33a7f1) )
+ ROM_LOAD16_BYTE( "ab02_2c1a_2c1.10a", 0x140001, 0x020000, CRC(66eb74dd) SHA1(f256763cb15b4524c09bd09b88df46a1498846ef) )
+ ROM_LOAD16_BYTE( "ab02_2c2a_2c2.10d", 0x140000, 0x020000, CRC(6edf4ff3) SHA1(9cbf7c6555cc27def3b580f5a7b0ff580984206d) )
+
+ ROM_REGION16_LE( 0x80000, "conversational", 0 ) // 80286 ROMs, 5a00 for Mill
+ ROM_LOAD16_BYTE( "5a00_041b.041", 0x000000, 0x020000, CRC(bf22c0a3) SHA1(56ab70bfd5794cb4db1d87c8becf7af522687564) )
+ ROM_LOAD16_BYTE( "5a00_042b.042", 0x000001, 0x020000, CRC(7abc9d6b) SHA1(5cb6ad08ce93aa99391d1ce46ac8db8ba2e0f94a) )
+ ROM_LOAD16_BYTE( "5a00_001b.001", 0x040000, 0x020000, CRC(cd2a2839) SHA1(bc20fd9ae9d071e1df835244aea85648d1bd1dbc) )
+ ROM_LOAD16_BYTE( "5a00_002b.002", 0x040001, 0x020000, CRC(d9ebbb4a) SHA1(9c3d96e9b88848472210beacdf9d300ddd42d16e) )
+
+ ROM_REGION16_BE( 0x50000, "gfxboard", 0 ) // graphics board 68000 code/data. 600a for lathe, 600b for mill, 6082 common to both
+ ROM_LOAD16_BYTE( "600b_001d_low.3l", 0x000001, 0x010000, CRC(50566c5c) SHA1(966c8d90d09a9c50c5dedebe9c67f1755846b234) )
+ ROM_LOAD16_BYTE( "600b_002d_high.3j", 0x000000, 0x010000, CRC(304e1ecb) SHA1(1e4b149b306550750fc03bd80bd399f239f68657) )
+ ROM_LOAD16_BYTE( "600a_001c.bin", 0x020001, 0x010000, CRC(63d9fc2f) SHA1(280e825ba7b79e7c38282a4f4b762d2219fd873b) )
+ ROM_LOAD16_BYTE( "600a_002c.bin", 0x020000, 0x010000, CRC(4d78e702) SHA1(a89bd07dc1ae030bdee5a541777825eaadbc2307) )
// font or tilemap data?
- ROM_LOAD( "6082_001a_cg.12b", 0x040000, 0x010000, CRC(f3d10cf9) SHA1(bc5bc88dcb5f347e1442aa4a0897747958a53413) )
+ ROM_LOAD( "6082_001a_cg.12b", 0x040000, 0x010000, CRC(f3d10cf9) SHA1(bc5bc88dcb5f347e1442aa4a0897747958a53413) )
- ROM_REGION16_BE( 0x40000, "cassette", 0 ) // "PMC Cassette C", ROM cartridge that plugs into the Base 1 board
- ROM_LOAD16_BYTE( "pmc_high.a2", 0x000000, 0x020000, CRC(7b8f9a96) SHA1(08d828b612c45bb3f2f7a56df418cd8e34731bf4) )
- ROM_LOAD16_BYTE( "pmc_low.a1", 0x000001, 0x020000, CRC(3ab261f8) SHA1(20b7eef96deb91a3a867f9ac4165b0c188fbcff3) )
+ ROM_REGION16_BE( 0x40000, "cassette", 0 ) // "PMC Cassette C", ROM cartridge that plugs into the Base 1 board
+ ROM_LOAD16_BYTE( "pmc_high.a2", 0x000000, 0x020000, CRC(7b8f9a96) SHA1(08d828b612c45bb3f2f7a56df418cd8e34731bf4) )
+ ROM_LOAD16_BYTE( "pmc_low.a1", 0x000001, 0x020000, CRC(3ab261f8) SHA1(20b7eef96deb91a3a867f9ac4165b0c188fbcff3) )
ROM_END
/* Driver */
/* YEAR NAME PARENT COMPAT MACHINE INPUT CLASS INIT COMPANY FULLNAME FLAGS */
COMP( 1990, fanucs15, 0, 0, fanucs15, fanucs15, driver_device, 0, "Fanuc", "System 15", GAME_NOT_WORKING | GAME_NO_SOUND)
-
-