diff options
Diffstat (limited to 'src/mame/drivers/tnzs.cpp')
-rw-r--r-- | src/mame/drivers/tnzs.cpp | 2922 |
1 files changed, 0 insertions, 2922 deletions
diff --git a/src/mame/drivers/tnzs.cpp b/src/mame/drivers/tnzs.cpp deleted file mode 100644 index a873128fab1..00000000000 --- a/src/mame/drivers/tnzs.cpp +++ /dev/null @@ -1,2922 +0,0 @@ -// license:BSD-3-Clause -// copyright-holders:Luca Elia, Mirko Buffoni, Takahiro Nogi -/*************************************************************************** - - -Notes: -- There are four versions of TNZS supported. - 1) "tnzs". New hardware revision. 3 Z80 and no M-Chip (8742 MPU). - 2) "tnzsj". New hardware revision. 3 Z80 and no M-Chip (8742 MPU). - 3) "tnzsjo". Standard hardware. 2 Z80 and the M-Chip. - 4) "tnzsop". Standard hardware. Harder gameplay, old Taito logo. Maybe a prototype? - -- TNZS hidden level select: keep service coin pressed (default:9) and reset the game. - When SERVICE SWITCH ERROR appears, release service coin and press 1 player start - three times, service coin again, and 1 player start. Use up/down to select the - starting level and press 1 player start to start. You'll also get 255 lives. - If you have enough patience and go up until the level reads "Q-1" (which corresponds - to 1-1), AND the "Invulnerability" dip switch is On, you'll be invulnerable. - Invulnerability isn't possible in 'tnzsop' (level select is stucked to level 6-1). - - -Hardware datails for the newer tnzs board (from pictures): - - Main board - M6100409A N.ZEALAND STORY (written on label) - M6100356A (written on pcb) - (note: Taito logo is the old version) - SETA X1-001A 8740KX - SETA X1-002A 8712KX - SETA X1-004 815100 - SETA X1-006 8136KX - SETA X1-007 805100 - these custom ics are also used in many other games (see drivers/seta.c, drivers/taito_x.c) - Main xtal 12.0000 MHZ - 2xZ80-B - YM2203C - sockets for U2 (Z80-B) and U35/U39/U43/U46 (LH534000) are empty and the sub board - connects to them. - - SUB PCB - K9100209A N.Z.LAND STORY (written on label) - K9100209A (written on pcb) - J9100159A (written on pcb) - (note: Taito logo is the new version) - Z80-B - - - -Stephh's notes (based on the games Z80 code and some tests) : - -1) 'plumppop' - - - Region stored at 0x7fff.b (CPU1) then 0xef49 (shared RAM) - - Sets : - * 'plumppop' : region = 0x00 - - Coinage relies on bit 0 of the region (code at 0x5141 in CPU1) : - * .......0 : TAITO_COINAGE_JAPAN_OLD - * .......1 : TAITO_COINAGE_WORLD - - Notice screen relies on bit 1 of the region (code at 0x16e8) : - * ......0. : Yes - * ......1. : No - - Copyright relies on bits 2 and 3 of the region (code at 0x276d) : - * ....00.. : "TAITO CORPORATION" / "ALL RIGHTS RESERVED" (Japan) - * ....01.. : "TAITO AMERICA CORP." / "ALL RIGHTS RESERVED" (US) - * ....10.. : "TAITO CORP. JAPAN" / "ALL RIGHTS RESERVED" (World) - * ....11.. : "TAITO CORP. JAPAN" / "LICENCED TO -------" - - -2) 'extrmatn' and clones - -2a) 'extrmatn' - - - Region stored at 0x7fff.b (CPU1) then 0x16 is stored at 0xef1d (shared RAM) ! - - Sets : - * 'extrmatn' : region = 0x16 - - New value is stored at 0xef1d (shared RAM) : - * 'extrmatn' : 0x16 - - Coinage relies on bit 0 of the region (code at 0x4703 in CPU1) : - * .......0 : TAITO_COINAGE_JAPAN_OLD - * .......1 : TAITO_COINAGE_WORLD - - Notice screen relies on bit 1 of the new value (code at 0x4285) : - * ......0. : Yes - * ......1. : No - - Copyright relies on bits 2 and 3 of the new value (code at 0x0cfe) : - * ....00.. : "TAITO CORPORATION" / " FOR U.S.A. " (Japan) - * ....01.. : "WORLD GAMES " / " FOR U.S.A. " (US) - * ....10.. : "TAITO CORP. JAPAN" / " FOR U.S.A. " (World) - * ....11.. : "TAITO CORP. JAPAN" / "LICENCED TO " - - 'ret' + modified byte to please checksum at 0x8df5 (bank = 0x07) : unknown effect - -2b) 'extrmatj' - - - Region stored at 0x7fff.b (CPU1) then 0x00 is stored at 0xef1d (shared RAM) ! - - Sets : - * 'extrmatj' : region = 0x00 - - Coinage relies on bit 0 of the region (code at 0x4703 in CPU1) : - * .......0 : TAITO_COINAGE_JAPAN_OLD - * .......1 : TAITO_COINAGE_WORLD - - Notice screen relies on bit 1 of the new value (code at 0x4285) : - * ......0. : Yes - * ......1. : No - - Copyright relies on bits 2 and 3 of the new value (code at 0x0cfe) : - * ....00.. : "TAITO CORPORATION" / "ALL RIGHTS RESERVED" (Japan) - * ....01.. : "TAITO AMERICA CORP." / "ALL RIGHTS RESERVED" (US) - * ....10.. : "TAITO CORP. JAPAN" / "ALL RIGHTS RESERVED" (World) - * ....11.. : "TAITO CORP. JAPAN" / "LICENCED TO " - - Code and data differences : - * 0x8df5 (bank = 0x07) : normal routine but still unknown effect - * 0x01e0 (CPU1) : 0x00 instead of 0x16 (value for region tests) - - -3) 'arknoid2' and clones - -3a) 'arknoid2' and 'arknid2j' - - - Region stored at 0x9fde.b (CPU1 - bank = 0x00) then stored at 0xe7f0 (shared RAM) - - Coin mode stored at 0x9fff.b (CPU1 - bank = 0x00) then stored at 0xe7f1 (shared RAM) - - Sets : - * 'arknoid2' : region = 0x02 - coin mode = 0x01 - * 'arknid2j' : region = 0x00 - coin mode = 0x00 - - Coinage relies on coin mode (code at 0x0b17 in CPU1) : - * 0x00 : TAITO_COINAGE_JAPAN_OLD - * else : TAITO_COINAGE_WORLD - - Notice screen relies on region (code at 0x495b) : - * 0x00 : Yes - * else : No - - Copyright relies on region (code at 0x4774) : - * 0x00 : "TAITO CORPORATION" / "ALL RIGHTS RESERVED" (Japan) - * 0x01 : "TAITO AMERICA CORP." / "ALL RIGHTS RESERVED" (US) - * 0x02 : "TAITO CORP. JAPAN" / "ALL RIGHTS RESERVED" (World) - * 0x03 : "TAITO AMERICA CORP." / "LICENCED TO ROMSTAR" / "FOR U.S.A." - -3b) 'arknid2u' - - - Region stored at 0x9fde.b (CPU1 - bank = 0x00) then stored at 0xe7f0 (shared RAM) - - Coin mode stored at 0x9fff.b (CPU1 - bank = 0x00) then stored at 0xe7f1 (shared RAM) - - Sets : - * 'arknid2u' : region = 0x03 - coin mode = 0x00 - - Coinage relies on coin mode (code at 0x0b17 in CPU1) : - * 0x00 : TAITO_COINAGE_JAPAN_OLD - * else : TAITO_COINAGE_WORLD - - Notice screen relies on region (code at 0x2e47) : - * 0x00 : Yes - * else : No - - Copyright relies on region (code at 0x475b) : - * 0x00 : "TAITO CORPORATION" / "ALL RIGHTS RESERVED" (Japan) - * 0x01 : "TAITO AMERICA CORP." / "ALL RIGHTS RESERVED" (US) - * 0x02 : "TAITO CORP. JAPAN" / "ALL RIGHTS RESERVED" (World) - * 0x03 : "TAITO AMERICA CORP." / "LICENCED TO ROMSTAR" / "FOR U.S.A." - - Levels differences : - * new level 1 - * levels 3 left and 17 left are swapped - * levels 17 right and 20 right are swapped - - -4) 'drtoppel' and clones - - - Region stored at 0x7fff.b (CPU1) then 0xe000 (shared RAM) - - Sets : - * 'drtoppel' : region = 0x03 - * 'drtopplu' : region = 0x02 - * 'drtopplj' : region = 0x01 - - These 3 games are 100% the same, only region differs ! - However, dumps for 'drtoppel' and 'drtopplu' are unsure (wrong ROM numbers). - - Coinage relies on region (code at 0x5141 in CPU1) : - * 0x01 and 0x02 : TAITO_COINAGE_JAPAN_OLD - * 0x03 and 0x04 : TAITO_COINAGE_WORLD - - Notice screen relies on region (code at 0x9331 - bank = 0x03) : - * 0x01 : Yes - * else : No - - Title relies on region (code at 0x90a4 - bank = 0x03) : - * 0x01 : Japanese - * else : English - - Copyright relies on region (code at 0x9b62 - bank = 0x03) : - * 0x01 : "TAITO CORPORATION" / "ALL RIGHTS RESERVED" (Japan) - * 0x02 : "TAITO AMERICA CORP." / "ALL RIGHTS RESERVED" (US) - * else : "TAITO CORP. JAPAN" / "ALL RIGHTS RESERVED" (World / ???) - - -5) 'kageki' and clones - -5a) 'kagekiu' - - - Region stored at 0x9fff.b (CPU1 - bank = 0x03) then 0xe000 (shared RAM) - - Sets : - * 'kagekiu' : region = 0x02 - - Coinage relies on region (code at 0x0099 in CPU1) : - * 0x01 and 0x02 : TAITO_COINAGE_JAPAN_OLD - * 0x03 and 0x04 : TAITO_COINAGE_WORLD - - No notice screen - - Copyright relies on region (code at 0x1eeb) : - * 0x01 : "TAITO CORPORATION" / "ALL RIGHTS RESERVED" (Japan) - * 0x02 : "TAITO AMERICA CORP." / "LICENCED TO ROMSTAR" / "FOR U.S.A." (US) - * else : "TAITO CORP. JAPAN" / "ALL RIGHTS RESERVED" (World / ???) - - English text on bad guys screens when game starts + English samples - - 2 players gameplay : players fight against each other in a best of 3 VS match, - then the winner is allowed to fight against the CPU enemies. - This is the reason why I've named DSWA bit 0 as "Unused". - Note that if there is a draw (same energy for both players), player 1 wins. - -5b) 'kagekij' - - - Region stored at 0x9fff.b (CPU1 - bank = 0x03) then 0xe000 (shared RAM) - - Sets : - * 'kagekij' : region = 0x01 - - Coinage relies on region (code at 0x0099 in CPU1) : - * 0x01 and 0x02 : TAITO_COINAGE_JAPAN_OLD - * 0x03 and 0x04 : TAITO_COINAGE_WORLD - - No notice screen - - Copyright relies on region (code at 0x1eb3) : - * 0x01 : "TAITO CORPORATION" / "ALL RIGHTS RESERVED" (Japan) - * 0x02 : "TAITO AMERICA CORP." / "ALL RIGHTS RESERVED" (US) - * else : "TAITO CORP. JAPAN" / "ALL RIGHTS RESERVED" (World / ???) - - Japanese text on bad guys screens when game starts + Japanese samples - - 2 players gameplay : players fight one after the other against CPU enemies. - Once an enemy is defeated or a player is dead, it's the other player turn. - - Code and data differences : - * CPU0 to be looked at carefully - * 0x9fff (CPU1 - bank = 0x03) : 0x01 instead of 0x02 (value for region tests) - -5c) 'kagekih' - - - Region stored at 0x9fff.b (CPU1 - bank = 0x03) then 0xe000 (shared RAM) - - Sets : - * 'kagekij' : region = 0x01 - - This set really looks like a hack : - * year has been changed from 1988 to 1992 - * the game uses Japanese ROMS, but CPU0 ROM displays English text - on bad guys screens when game starts - - Coinage relies on region (code at 0x0099 in CPU1) : - * 0x01 and 0x02 : TAITO_COINAGE_JAPAN_OLD - * 0x03 and 0x04 : TAITO_COINAGE_WORLD - - No notice screen - - Copyright relies on region (code at 0x1ee0) : - * 0x01 : "TAITO CORPORATION" / "ALL RIGHTS RESERVED" (Japan) - * 0x02 : "TAITO AMERICA CORP." / "ALL RIGHTS RESERVED" (US) - * else : "TAITO CORP. JAPAN" / "ALL RIGHTS RESERVED" (World / ???) - - English text on bad guys screens when game starts but Japanese samples ! - - 2 players gameplay : players fight against each other in a best of 3 VS match, - then the winner is allowed to fight against the CPU enemies. - This is the reason why I've named DSWA bit 0 as "Unused". - Note that if there is a draw (same energy for both players), player 1 wins. - - Code and data differences : - * CPU0 to be looked at carefully - * 0x9fff (CPU1 - bank = 0x03) : 0x01 instead of 0x02 (value for region tests) - - -6) 'chukatai' and clones - - - Region stored at 0x9fff.b (CPU1 - bank = 0x03) then 0xe01a (shared RAM) - - Sets : - * 'chukatai' : region = 0x03 - * 'chukatau' : region = 0x02 - * 'chukataj' : region = 0x01 - - These 3 games are 100% the same, only region differs ! - However, dumps for 'chukatai' and 'chukatau' are unsure (wrong ROM numbers). - - Coinage relies on region (code at 0x0114 in CPU1) : - * 0x01 and 0x02 : TAITO_COINAGE_JAPAN_OLD - * 0x03 and 0x04 : TAITO_COINAGE_WORLD - - Notice screen relies on region (code at 0x0253) : - * 0x01 : Yes - * else : No - - Copyright relies on region (code at 0x0b38) : - * 0x01 : "TAITO CORPORATION" / "ALL RIGHTS RESERVED" (Japan) - * 0x02 : "TAITO AMERICA CORPORATION" / "ALL RIGHTS RESERVED" (US) - * else : "TAITO CORPORATION JAPAN" / "ALL RIGHTS RESERVED" (World / ???) - I still need to understand how the strings are displayed though. - - Power-ups display is affected by the region - - -7) 'tnzs' and clones - -7a) 'tnzs' and 'tnzsj' - - - Region stored at 0x7fff.b (CPU1) - - Sets : - * 'tnzs' : region = 0x03 - * 'tnzsj' : region = 0x01 - - These 2 games are 100% the same, only region differs ! - - Code at 0x00fb (CPU1) changes region to another value : - * 0x01 -> 0x00 - * 0x02 -> 0x06 - * 0x03 -> 0x0b - * 0x04 -> 0x0e - This value is stored at 0xd035 (CPU1) then 0xef1d (shared RAM). - - Coinage relies on bit 0 of the new value (code at 0x0aa7 in CPU1) : - * .......0 : TAITO_COINAGE_JAPAN_OLD - * .......1 : TAITO_COINAGE_WORLD - - Notice screen relies on bit 1 of the new value (code at 0xbed0 - bank = 0x05) : - * ......0. : Yes - * ......1. : No - - Copyright relies on bits 2 and 3 of the new value (code at 0x12eb) : - * ....00.. : "TAITO CORPORATION" / "ALL RIGHTS RESERVED" (Japan) - * ....01.. : "TAITO AMERICA CORP." / "ALL RIGHTS RESERVED" (US) - * ....10.. : "TAITO CORP. JAPAN" / "ALL RIGHTS RESERVED" (World) - * ....11.. : "TAITO CORP. JAPAN" / "LICENCED TO " - - New Taito logo - -7b) 'tnzsjo' - - - Region stored at 0x7fff.b (CPU1) - - Sets : - * 'tnzsjo' : region = 0x01 - - Code at 0x00f7 (CPU1) changes region to another value : - * 0x01 -> 0x00 - * 0x02 -> 0x06 - * 0x03 -> 0x0b - * 0x04 -> 0x0e - This value is stored at 0xd035 (CPU1) then 0xef1d (shared RAM). - - Coinage relies on bit 0 of the new value (code at 0x5f68 in CPU1) : - * .......0 : TAITO_COINAGE_JAPAN_OLD - * .......1 : TAITO_COINAGE_WORLD - - Notice screen relies on bit 1 of the new value (code at 0xbbb5 - bank = 0x05) : - * ......0. : Yes - * ......1. : No - - Copyright relies on bits 2 and 3 of the new value (code at 0x12ed) : - * ....00.. : "TAITO CORPORATION" / "ALL RIGHTS RESERVED" (Japan) - * ....01.. : "TAITO AMERICA CORP." / "ALL RIGHTS RESERVED" (US) - * ....10.. : "TAITO CORP. JAPAN" / "ALL RIGHTS RESERVED" (World) - * ....11.. : "TAITO CORP. JAPAN" / "LICENCED TO " - - New Taito logo - - levels are different from 'tnzs' - -7c) 'tnzsop' - - - Region stored at 0x7fff.b (CPU1) - - Sets : - * 'tnzso' : region = 0x03 - - Code at 0x021e (CPU1) changes region to another value : - * 0x01 -> 0x00 - * 0x02 -> 0x06 - * 0x03 -> 0x0b - * 0x04 -> 0x0e - This value is stored at 0xd46b (CPU1) then 0xef1d (shared RAM). - - Coinage relies on bit 0 of the new value (code at 0x5d91 in CPU1) : - * .......0 : TAITO_COINAGE_JAPAN_OLD - * .......1 : TAITO_COINAGE_WORLD - - Notice screen relies on bit 1 of the new value (code at 0x0cdd) : - * ......0. : Yes - * ......1. : No - - Copyright relies on bits 2 and 3 of the new value (code at 0x1062) : - * ....00.. : "TAITO CORPORATION" / "ALL RIGHTS RESERVED" (Japan) - * ....01.. : "TAITO AMERICA CORP." / "ALL RIGHTS RESERVED" (US) - * ....10.. : "TAITO CORP. JAPAN" / "ALL RIGHTS RESERVED" (World) - * ....11.. : "TAITO CORP. JAPAN" / "LICENCED TO " - - Old Taito logo - - levels are different from 'tnzs' and 'tnzsjo' - - -8) 'kabukiz' and clones - - - No region byte : a value is loaded in register A each time it is needed ! - - Sets : - * 'kabukiz' : value = 0x02 - * 'kabukizj' : value = 0x00 - - Coinage relies on register A (code at 0x016c in CPU1) - * 0x02 : TAITO_COINAGE_WORLD - * else : TAITO_COINAGE_JAPAN_OLD - - Notice screen relies on register A (code at 0x0b30 in CPU1) : - * 0x00 : Yes - * else : No - - Copyright relies on register A (code at 0x0d4e in CPU1) - * 0x00 : "TAITO CORPORATION" / "ALL RIGHTS RESERVED" (Japan) - * 0x01 : "TAITO AMERICA CORP." / "ALL RIGHTS RESERVED" (US) - * else : "TAITO CORP. JAPAN" / "ALL RIGHTS RESERVED" (World) - - 'babukizj' has extra code in CPU1 to be looked at carefully. - - -9) 'insectx' - - - Region stored at 0x9fff.b (CPU1 - bank = 0x03) then 0xec21 (shared RAM) - - Sets : - * 'insectx' : region = 0x03 - - Coinage relies on region (code at 0x025b in CPU1) : - * 0x01 : TAITO_COINAGE_JAPAN_OLD - * 0x02 : TAITO_COINAGE_US - * else : TAITO_COINAGE_WORLD - - Notice screen relies on region (code at 0x0a6c) : - * 0x01 : Yes - * else : No - - Copyright relies on region (code at 0xac16 - bank = 0x02) : - * 0x01 : "TAITO CORPORATION" / "ALL RIGHTS RESERVED" (Japan) - * 0x02 : "TAITO AMERICA CORPORATION" / "ALL RIGHTS RESERVED" (US) - * else : "TAITO CORPORATION JAPAN" / "ALL RIGHTS RESERVED" (World) - - This game doesn't use standard settings for "Difficulty" Dip Switch : - look at table at 0x1b86 (4 * 2 bytes) and especially table at 0x4731 - (4 bytes) which determines end of level boss energy via code at 0x46e2, - and you'll notice that "Easy" and "Hard" settings are swapped. - End of level boss energy is stored at 0xe484 and 0xe485 (LSB first). - - -10) 'jpopnics' - - - Region stored at 0x7fff.b (CPU1) then 0xef49 (shared RAM) - - Sets : - * 'jpopnics' : region = 0x00 - - Coinage relies on bit 0 of the region (code at 0x5141 in CPU1) : - * .......0 : TAITO_COINAGE_JAPAN_OLD - * .......1 : TAITO_COINAGE_WORLD - However, coinage is in fact always 1C_1C for both coin slots due to - 'ret' instruction at 0x5151 and way coins are handled at 0x4f60. - - Notice screen relies on bit 1 of the region (code at 0x16e8) : - * ......0. : Yes - * ......1. : No - Notice screen displays "Korea" instead of "Japan". - - Copyright relies on bits 2 and 3 of the region (code at 0x276d), - but table at 0x2781 is the same for any combinaison : - * ....??.. : "NICS CO. LTD. 1992" / "ALL RIGHTS RESERVED" - - -TODO: ------ -- Find out how the hardware credit-counter works (MPU) -- Fix MCU simulation errors : - * avoid credits to be increased when in "test mode" to avoid coin lockout - (needed to complete special test mode in 'extrmatn' and 'arknoid2') - * why are credits limited to 9 in some games ? - pressing SERVICE1 allows to go up to 100 and cause this : - . 'plumppop' : freeze - . 'extrmatn' : reset - . 'arknoid2' : coin overflow -- Fix video offsets (See Dr Toppel in Flip-Screen - also affects Chuka Taisen) -- Video scroll side flicker in Chuka Taisen, Insector X, Dr Toppel, Kabuki Z -- Sprite/background sync during scrolling, e.g. insectx, kabukiz. -- Merge video driver with seta.c (it's the same thing but seta.c assumes a 16-bit CPU) -- Figure out remaining unknown Dip Switches in 'plumppop' and 'jpopnics' -- Get rid of the COMMON_* macros to use generic INPUT_PORTS definition - and PORT_INCLUDE macro by changing the ym2203_config definition - - -Arkanoid 2: - - What do writes at $f400 do ? - - Why does the game zero the $fd00 area ? -Extrmatn: - - What do reads from $f600 do ? (discarded) -Chuka Taisen: - - What do writes at $f400 do ? (value 40h) - - What do reads from $f600 do in service mode ? -Dr Toppel: - - What do writes at $f400 do ? (value 40h) - - What do reads from $f600 do in service mode ? - -**************************************************************************** - -extrmatn and arknoid2 have a special test mode. The correct procedure to make -it succeed is as follows: -- enter service mode -- on the color test screen, press 2 (player 2 start) -- set dip switch 1 and dip switch 2 so that they read 00000001 -- reset the emulation, and skip the previous step. -- press 5 (coin 1). Text at the bottom will change to "CHECKING NOW". -- use all the inputs, including tilt, until all inputs are OK -- press 5 (coin 1) - to confirm that coin lockout 1 works -- press 5 (coin 1) - to confirm that coin lockout 2 works -- set dip switch 1 to 00000000 -- set dip switch 1 to 10101010 -- set dip switch 1 to 11111111 -- set dip switch 2 to 00000000 -- set dip switch 2 to 10101010 -- set dip switch 2 to 11111111 -- speaker should now output a tone -- press 5 (coin 1), to confirm that OPN works -- press 5 (coin 1), to confirm that SSGCH1 works -- press 5 (coin 1), to confirm that SSGCH2 works -- press 5 (coin 1), to confirm that SSGCH3 works -- finished ("CHECK ALL OK!") - -**************************************************************************** - -The New Zealand Story memory map (preliminary) - -CPU #1 -0000-7fff ROM -8000-bfff banked - banks 0-1 RAM; banks 2-7 ROM -c000-dfff object RAM, including: - c000-c1ff sprites (code, low byte) - c200-c3ff sprites (x-coord, low byte) - c400-c5ff tiles (code, low byte) - - d000-d1ff sprites (code, high byte) - d200-d3ff sprites (x-coord and colour, high byte) - d400-d5ff tiles (code, high byte) - d600-d7ff tiles (colour) -e000-efff RAM shared with CPU #2 -f000-ffff VDC RAM, including: - f000-f1ff sprites (y-coord) - f200-f2ff scrolling info - f300-f301 vdc controller - f302-f303 scroll x-coords (high bits) - f600 bankswitch - f800-fbff palette - -CPU #2 -0000-7fff ROM -8000-9fff banked ROM -a000 bankswitch -b000-b001 YM2203 interface (with DIPs on YM2203 ports) -c000-c001 I8742 MCU -e000-efff RAM shared with CPU #1 -f000-f003 inputs (used only by Arkanoid 2) - -****************************************************************************/ -/*************************************************************************** - - Arkanoid 2 - Revenge of Doh! - (C) 1987 Taito - - driver by - - Luca Elia (l.elia@tin.it) - Mirko Buffoni - -- The game doesn't write to f800-fbff (static palette) - - - - Interesting routines (main cpu) - ------------------------------- - -1ed prints the test screen (first string at 206) - -47a prints dipsw1&2 e 1p&2p paddleL values: - e821 IN DIPSW1 e823-4 1P PaddleL (lo-hi) - e822 IN DIPSW2 e825-6 2P PaddleL (lo-hi) - -584 prints OK or NG on each entry: - if (*addr)!=0 { if (*addr)!=2 OK else NG } - e880 1P PADDLEL e88a IN SERVICE - e881 1P PADDLER e88b IN TILT - e882 1P BUTTON e88c OUT LOCKOUT1 - e883 1P START e88d OUT LOCKOUT2 - e884 2P PADDLEL e88e IN DIP-SW1 - e885 2P PADDLER e88f IN DIP-SW2 - e886 2P BUTTON e890 SND OPN - e887 2P START e891 SND SSGCH1 - e888 IN COIN1 e892 SND SSGCH2 - e889 IN COIN2 e893 SND SSGCH3 - -672 prints a char -715 prints a string (0 terminated) - - Shared Memory (values written mainly by the sound cpu) - ------------------------------------------------------ - -e001=dip-sw A e399=coin counter value e72c-d=1P paddle (lo-hi) -e002=dip-sw B e3a0-2=1P score/10 (BCD) e72e-f=2P paddle (lo-hi) -e008=level=2*(shown_level-1)+x <- remember it's a binary tree (42 last) -e7f0=country code(from 9fde in sound ROM) -e807=counter, reset by sound cpu, increased by main cpu each vblank -e80b=test progress=0(start) 1(first 8) 2(all ok) 3(error) -ec09-a~=ed05-6=xy pos of cursor in hi-scores -ec81-eca8=hi-scores(8bytes*5entries) - -addr bit name active addr bit name active -e72d 6 coin[1] low e729 1 2p select low - 5 service high 0 1p select low - 4 coin[2] low - -addr bit name active addr bit name active -e730 7 tilt low e7e7 4 1p fire low - 0 2p fire low - - Interesting routines (sound cpu) - -------------------------------- - -4ae check starts B73,B7a,B81,B99 coin related -8c1 check coins 62e lockout check 664 dsw check - - Interesting locations (sound cpu) - --------------------------------- - -d006=each bit is on if a corresponding location (e880-e887) has changed -d00b=(c001)>>4=tilt if 0E (security sequence must be reset?) -addr bit name active -d00c 7 tilt - 6 ?service? - 5 coin2 low - 4 coin1 low - -d00d=each bit is on if the corresponding location (e880-e887) is 1 (OK) -d00e=each of the 4 MSBs is on if .. -d00f=FF if tilt, 00 otherwise -d011=if 00 checks counter, if FF doesn't -d23f=input port 1 value - -***************************************************************************/ -/*************************************************************************** - -Kageki -(c) 1988 Taito Corporation - -Driver by Takahiro Nogi (nogi@kt.rim.or.jp) 1999/11/06 - -***************************************************************************/ - -/*************************************************************************** - Jumping Pop - - added by David Haywood, thanks to Robin Cooper - - This is not a Taito board, it's a copy, it contains no original Taito or - Seta components. - - The game is a bootleg of Plump Pop produced by NICs of Korea, it has new - graphics, sounds etc. - - Uses a YM2151 instead of the YM2203, has no MCU - - Uses Palette RAM instead of PROMs. - - ToDo: - - Palette format (or gfx decode?) appears to be incorrect, some colours - clearly don't match the screenshot. - - Frequencies have not been measured - - The bar behind the players flickers first boot / first attract levels, bug? - - Inputs might be wrong, should be joystick not spinner? (can't select character) - -***************************************************************************/ - -#include "emu.h" -#include "includes/tnzs.h" -#include "includes/taitoipt.h" - -#include "cpu/z80/z80.h" -#include "sound/2203intf.h" -#include "sound/volt_reg.h" -#include "sound/ym2151.h" -#include "screen.h" -#include "speaker.h" - - -SAMPLES_START_CB_MEMBER(kageki_state::init_samples) -{ - uint8_t *src = memregion("samples")->base() + 0x0090; - for (int i = 0; i < MAX_SAMPLES; i++) - { - int start = (src[(i * 2) + 1] * 256) + src[(i * 2)]; - uint8_t *scan = &src[start]; - int size = 0; - - // check sample length - while (*scan++ != 0x00) - size++; - - /* 2009-11 FP: should these be saved? */ - m_sampledata[i] = std::make_unique<int16_t[]>(size); - m_samplesize[i] = size; - - if (start < 0x100) - start = size = 0; - - // signed 8-bit sample to unsigned 8-bit sample convert - int16_t *dest = m_sampledata[i].get(); - scan = &src[start]; - for (int n = 0; n < size; n++) - { - *dest++ = (int8_t)((*scan++) ^ 0x80) * 256; - } - // logerror("samples num:%02X ofs:%04X lng:%04X\n", i, start, size); - } -} - - -READ8_MEMBER(kageki_state::csport_r) -{ - int dsw, dsw1, dsw2; - - dsw1 = m_dswa->read(); - dsw2 = m_dswb->read(); - - switch (m_csport_sel) - { - case 0x00: // DSW2 5,1 / DSW1 5,1 - dsw = (((dsw2 & 0x10) >> 1) | ((dsw2 & 0x01) << 2) | ((dsw1 & 0x10) >> 3) | ((dsw1 & 0x01) >> 0)); - break; - case 0x01: // DSW2 7,3 / DSW1 7,3 - dsw = (((dsw2 & 0x40) >> 3) | ((dsw2 & 0x04) >> 0) | ((dsw1 & 0x40) >> 5) | ((dsw1 & 0x04) >> 2)); - break; - case 0x02: // DSW2 6,2 / DSW1 6,2 - dsw = (((dsw2 & 0x20) >> 2) | ((dsw2 & 0x02) << 1) | ((dsw1 & 0x20) >> 4) | ((dsw1 & 0x02) >> 1)); - break; - case 0x03: // DSW2 8,4 / DSW1 8,4 - dsw = (((dsw2 & 0x80) >> 4) | ((dsw2 & 0x08) >> 1) | ((dsw1 & 0x80) >> 6) | ((dsw1 & 0x08) >> 3)); - break; - default: - dsw = 0x00; - // logerror("csport_sel error !! (0x%08X)\n", m_csport_sel); - } - - return (dsw & 0xff); -} - -WRITE8_MEMBER(kageki_state::csport_w) -{ - char mess[80]; - - if (data > 0x3f) - { - // read dipsw port - m_csport_sel = (data & 0x03); - } - else - { - if (data > MAX_SAMPLES) - { - // stop samples - m_samples->stop(0); - sprintf(mess, "VOICE:%02X STOP", data); - } - else - { - // play samples - m_samples->start_raw(0, m_sampledata[data].get(), m_samplesize[data], 7000); - sprintf(mess, "VOICE:%02X PLAY", data); - } - // popmessage(mess); - } -} - -void tnzs_base_state::main_map(address_map &map) -{ - map(0x0000, 0x7fff).rom(); - map(0x8000, 0xbfff).m(m_mainbank, FUNC(address_map_bank_device::amap8)); - map(0xc000, 0xcfff).ram().rw(m_seta001, FUNC(seta001_device::spritecodelow_r8), FUNC(seta001_device::spritecodelow_w8)); - map(0xd000, 0xdfff).ram().rw(m_seta001, FUNC(seta001_device::spritecodehigh_r8), FUNC(seta001_device::spritecodehigh_w8)); - map(0xe000, 0xefff).ram().share("share1"); - map(0xf000, 0xf2ff).ram().rw(m_seta001, FUNC(seta001_device::spriteylow_r8), FUNC(seta001_device::spriteylow_w8)); - map(0xf300, 0xf303).mirror(0xfc).w(m_seta001, FUNC(seta001_device::spritectrl_w8)); /* control registers (0x80 mirror used by Arkanoid 2) */ - map(0xf400, 0xf400).w(m_seta001, FUNC(seta001_device::spritebgflag_w8)); /* enable / disable background transparency */ - map(0xf600, 0xf600).nopr().w(FUNC(tnzs_base_state::ramrom_bankswitch_w)); - map(0xf800, 0xfbff).ram().w(m_palette, FUNC(palette_device::write8)).share("palette"); -} - -void extrmatn_state::prompal_main_map(address_map &map) -{ - main_map(map); - /* arknoid2, extrmatn, plumppop and drtoppel have PROMs instead of RAM */ - /* drtoppel writes here anyway! (maybe leftover from tests during development) */ - map(0xf800, 0xfbff).nopw(); -} - -void tnzsb_state::tnzsb_main_map(address_map &map) -{ - map(0x0000, 0x7fff).rom(); - map(0x8000, 0xbfff).m(m_mainbank, FUNC(address_map_bank_device::amap8)); - map(0xc000, 0xcfff).ram().rw(m_seta001, FUNC(seta001_device::spritecodelow_r8), FUNC(seta001_device::spritecodelow_w8)); - map(0xd000, 0xdfff).ram().rw(m_seta001, FUNC(seta001_device::spritecodehigh_r8), FUNC(seta001_device::spritecodehigh_w8)); - map(0xe000, 0xefff).ram().share("share1"); - map(0xf000, 0xf2ff).ram().rw(m_seta001, FUNC(seta001_device::spriteylow_r8), FUNC(seta001_device::spriteylow_w8)); - map(0xf300, 0xf303).mirror(0xfc).w(m_seta001, FUNC(seta001_device::spritectrl_w8)); /* control registers (0x80 mirror used by Arkanoid 2) */ - map(0xf400, 0xf400).w(m_seta001, FUNC(seta001_device::spritebgflag_w8)); /* enable / disable background transparency */ - map(0xf600, 0xf600).w(FUNC(tnzsb_state::ramrom_bankswitch_w)); - /* kabukiz still writes here but it's not used (it's palette RAM in type1 map) */ - map(0xf800, 0xfbff).nopw(); -} - -void tnzs_base_state::base_sub_map(address_map &map) -{ - map(0x0000, 0x7fff).rom(); - map(0x8000, 0x9fff).bankr("subbank"); - map(0xa000, 0xa000).w(FUNC(tnzs_base_state::bankswitch1_w)); - map(0xb000, 0xb001).rw("ymsnd", FUNC(ym2203_device::read), FUNC(ym2203_device::write)); - map(0xd000, 0xdfff).ram(); - map(0xe000, 0xefff).ram().share("share1"); -} - -void tnzs_mcu_state::tnzs_sub_map(address_map &map) -{ - base_sub_map(map); - map(0xc000, 0xc001).rw(FUNC(tnzs_mcu_state::mcu_r), FUNC(tnzs_mcu_state::mcu_w)); /* not present in insectx */ - map(0xa000, 0xa000).w(FUNC(tnzs_mcu_state::bankswitch1_w)); - map(0xf000, 0xf003).r(FUNC(tnzs_mcu_state::analog_r)); /* paddles in arkanoid2/plumppop. The ports are */ - /* read but not used by the other games, and are not read at */ - /* all by insectx. */ -} - -void arknoid2_state::arknoid2_sub_map(address_map &map) -{ - tnzs_sub_map(map); - map(0xc000, 0xc001).rw(FUNC(arknoid2_state::mcu_r), FUNC(arknoid2_state::mcu_w)); -} - -void kageki_state::kageki_sub_map(address_map &map) -{ - base_sub_map(map); - map(0xc000, 0xc000).portr("IN0"); - map(0xc001, 0xc001).portr("IN1"); - map(0xc002, 0xc002).portr("IN2"); -} - -void insectx_state::insectx_sub_map(address_map &map) -{ - base_sub_map(map); - map(0xc000, 0xc000).portr("IN0"); - map(0xc001, 0xc001).portr("IN1"); - map(0xc002, 0xc002).portr("IN2"); -} - -/* the later board is different, it has a third CPU (and of course no mcu) */ - -void tnzsb_state::tnzsb_base_sub_map(address_map &map) -{ - map(0x0000, 0x7fff).rom(); - map(0x8000, 0x9fff).bankr("subbank"); - map(0xa000, 0xa000).w(FUNC(tnzsb_state::bankswitch1_w)); - map(0xb002, 0xb002).portr("DSWA"); - map(0xb003, 0xb003).portr("DSWB"); - map(0xb004, 0xb004).w(FUNC(tnzsb_state::sound_command_w)); - map(0xc000, 0xc000).portr("IN0"); - map(0xc001, 0xc001).portr("IN1"); - map(0xc002, 0xc002).portr("IN2"); - map(0xd000, 0xdfff).ram(); - map(0xe000, 0xefff).ram().share("share1"); -} - -void tnzsb_state::tnzsb_sub_map(address_map &map) -{ - tnzsb_base_sub_map(map); - map(0xf000, 0xf3ff).ram().w(m_palette, FUNC(palette_device::write8)).share("palette"); -} - -void kabukiz_state::kabukiz_sub_map(address_map &map) -{ - tnzsb_base_sub_map(map); - map(0xf800, 0xfbff).ram().w(m_palette, FUNC(palette_device::write8)).share("palette"); -} - -void tnzsb_state::tnzsb_cpu2_map(address_map &map) -{ - map(0x0000, 0x7fff).rom(); - map(0xc000, 0xdfff).ram(); -} - -void kabukiz_state::kabukiz_cpu2_map(address_map &map) -{ - map(0x0000, 0x7fff).rom(); - map(0x8000, 0xbfff).bankr("audiobank"); - map(0xe000, 0xffff).ram(); -} - -void tnzsb_state::tnzsb_io_map(address_map &map) -{ - map.global_mask(0xff); - map(0x00, 0x01).rw("ymsnd", FUNC(ym2203_device::read), FUNC(ym2203_device::write)); - map(0x02, 0x02).r(m_soundlatch, FUNC(generic_latch_8_device::read)); -} - -void jpopnics_state::jpopnics_main_map(address_map &map) -{ - map(0x0000, 0x7fff).rom(); - map(0x8000, 0xbfff).m(m_mainbank, FUNC(address_map_bank_device::amap8)); - map(0xc000, 0xcfff).ram().rw(m_seta001, FUNC(seta001_device::spritecodelow_r8), FUNC(seta001_device::spritecodelow_w8)); - map(0xd000, 0xdfff).ram().rw(m_seta001, FUNC(seta001_device::spritecodehigh_r8), FUNC(seta001_device::spritecodehigh_w8)); - map(0xe000, 0xefff).ram().share("share1"); /* WORK RAM (shared by the 2 z80's) */ - map(0xf000, 0xf2ff).ram().rw(m_seta001, FUNC(seta001_device::spriteylow_r8), FUNC(seta001_device::spriteylow_w8)); - map(0xf300, 0xf303).mirror(0xfc).w(m_seta001, FUNC(seta001_device::spritectrl_w8)); /* control registers (0x80 mirror used by Arkanoid 2) */ - map(0xf400, 0xf400).w(m_seta001, FUNC(seta001_device::spritebgflag_w8)); /* enable / disable background transparency */ - map(0xf600, 0xf600).nopr().w(FUNC(jpopnics_state::ramrom_bankswitch_w)); - map(0xf800, 0xffff).ram().w(m_palette, FUNC(palette_device::write8)).share("palette"); -} - -void jpopnics_state::jpopnics_sub_map(address_map &map) -{ - map(0x0000, 0x7fff).rom(); - map(0x8000, 0x9fff).bankr("subbank"); - - map(0xa000, 0xa000).w(FUNC(jpopnics_state::subbankswitch_w)); - map(0xb000, 0xb001).rw("ymsnd", FUNC(ym2151_device::read), FUNC(ym2151_device::write)); - map(0xc000, 0xc000).portr("IN1"); - map(0xc001, 0xc001).portr("IN2"); - map(0xc600, 0xc600).portr("DSWA"); - map(0xc601, 0xc601).portr("DSWB"); - - map(0xd000, 0xdfff).ram(); - map(0xe000, 0xefff).ram().share("share1"); - - map(0xf000, 0xf003).r(m_upd4701, FUNC(upd4701_device::read_xy)); -} - -/* RAM/ROM bank that maps at 0x8000-0xbfff on maincpu */ -void tnzs_base_state::mainbank_map(address_map &map) -{ - map(0x00000, 0x07fff).ram(); // instead of the first two banks of ROM being repeated redundantly the hardware maps RAM here - map(0x08000, 0x1ffff).rom().region(":maincpu", 0x8000); -} - -void tnzs_base_state::tnzs_mainbank(machine_config &config) -{ - ADDRESS_MAP_BANK(config, "mainbank").set_map(&tnzs_base_state::mainbank_map).set_options(ENDIANNESS_LITTLE, 8, 17, 0x4000); -} - -#define COMMON_IN2\ - PORT_START("IN2")\ - PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_SERVICE1 )\ - PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_TILT )\ - PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_UNKNOWN )\ - PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_UNKNOWN )\ - PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_UNKNOWN )\ - PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_UNKNOWN )\ - PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_UNKNOWN )\ - PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_UNKNOWN ) - -static INPUT_PORTS_START( plumppop ) - /* 0xb001 (CPU1) port 0 -> 0xef0e (shared RAM) */ - PORT_START("DSWA") - PORT_DIPNAME( 0x01, 0x01, DEF_STR( Unknown ) ) PORT_DIPLOCATION("SWA:1") /* code at 0x6e99 - is it ever called ? */ - PORT_DIPSETTING( 0x01, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - TAITO_DSWA_BITS_1_TO_3_LOC(SWA) - TAITO_COINAGE_JAPAN_OLD_LOC(SWA) - - /* 0xb001 (CPU1) port 1 -> 0xef0f (shared RAM) */ - PORT_START("DSWB") - TAITO_DIFFICULTY_LOC(SWB) - PORT_DIPNAME( 0x0c, 0x0c, DEF_STR( Bonus_Life ) ) PORT_DIPLOCATION("SWB:3,4") /* table at 0x2b86 */ - PORT_DIPSETTING( 0x08, "50k 200k 150k+" ) - PORT_DIPSETTING( 0x0c, "50k 250k 200k+" ) - PORT_DIPSETTING( 0x04, "100k 300k 200k+" ) - PORT_DIPSETTING( 0x00, "100k 400k 300k+" ) - PORT_DIPNAME( 0x30, 0x30, DEF_STR( Lives ) ) PORT_DIPLOCATION("SWB:5,6") - PORT_DIPSETTING( 0x20, "2" ) - PORT_DIPSETTING( 0x30, "3" ) - PORT_DIPSETTING( 0x10, "4" ) - PORT_DIPSETTING( 0x00, "5" ) - PORT_DIPNAME( 0x40, 0x40, "P1 & P2 Children Collision" ) PORT_DIPLOCATION("SWB:7") /* code at 0x3dcc */ - PORT_DIPSETTING( 0x40, DEF_STR( No ) ) // both players' children collide with each other / Off=No / On=Yes - PORT_DIPSETTING( 0x00, DEF_STR( Yes ) ) - PORT_DIPNAME( 0x80, 0x80, DEF_STR( Allow_Continue ) ) PORT_DIPLOCATION("SWB:8") - PORT_DIPSETTING( 0x00, DEF_STR( No ) ) - PORT_DIPSETTING( 0x80, DEF_STR( Yes ) ) - - PORT_START("IN0") - PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_UNKNOWN ) - PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_UNKNOWN ) - PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_UNKNOWN ) - PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_UNKNOWN ) - PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_BUTTON1 ) PORT_PLAYER(1) - PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_BUTTON2 ) PORT_PLAYER(1) PORT_NAME("P1 Button 2 (Cheat)") - PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_UNKNOWN ) - PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_START1 ) - - PORT_START("IN1") - PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_UNKNOWN ) - PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_UNKNOWN ) - PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_UNKNOWN ) - PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_UNKNOWN ) - PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_BUTTON1 ) PORT_PLAYER(2) - PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_BUTTON2 ) PORT_PLAYER(2) PORT_NAME("P2 Button 2 (Cheat)") /* not working ? */ - PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_UNKNOWN ) - PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_START2 ) - - PORT_START("IN2") - PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_SERVICE1 ) - PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_TILT ) - PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_UNKNOWN ) - PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_UNKNOWN ) - PORT_BIT( 0x10, IP_ACTIVE_HIGH, IPT_COIN1 ) - PORT_BIT( 0x20, IP_ACTIVE_HIGH, IPT_COIN2 ) - PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_UNKNOWN ) - PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_UNKNOWN ) - - PORT_START("COIN1") - PORT_BIT( 1, IP_ACTIVE_HIGH, IPT_COIN1 ) - - PORT_START("COIN2") - PORT_BIT( 1, IP_ACTIVE_HIGH, IPT_COIN2 ) - - PORT_START("AN1") /* spinner 1 - read at f000/1 */ - PORT_BIT( 0x0fff, 0x0000, IPT_DIAL ) PORT_SENSITIVITY(70) PORT_KEYDELTA(15) PORT_PLAYER(1) PORT_RESET - - PORT_START("AN2") /* spinner 2 - read at f002/3 */ - PORT_BIT( 0x0fff, 0x0000, IPT_DIAL ) PORT_SENSITIVITY(70) PORT_KEYDELTA(15) PORT_PLAYER(2) PORT_RESET -INPUT_PORTS_END - - -static INPUT_PORTS_START( extrmatn ) - /* 0xb001 (CPU1) port 0 -> 0xef0e (shared RAM) */ - PORT_START("DSWA") - PORT_DIPUNUSED_DIPLOC( 0x01, IP_ACTIVE_LOW, "SWA:1" ) - PORT_DIPNAME( 0x02, 0x02, DEF_STR( Flip_Screen ) ) PORT_DIPLOCATION("SWA:2") - PORT_DIPSETTING( 0x02, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_SERVICE_DIPLOC( 0x04, IP_ACTIVE_LOW, "SWA:3" ) - PORT_DIPUNUSED_DIPLOC( 0x08, IP_ACTIVE_LOW, "SWA:4" ) - TAITO_COINAGE_JAPAN_OLD_LOC(SWA) - - /* 0xb001 (CPU1) port 1 -> 0xef0f (shared RAM) */ - PORT_START("DSWB") - TAITO_DIFFICULTY_LOC(SWB) - PORT_DIPUNUSED_DIPLOC( 0x04, IP_ACTIVE_LOW, "SWB:3" ) - PORT_DIPUNUSED_DIPLOC( 0x08, IP_ACTIVE_LOW, "SWB:4" ) - PORT_DIPUNUSED_DIPLOC( 0x10, IP_ACTIVE_LOW, "SWB:5" ) - PORT_DIPUNUSED_DIPLOC( 0x20, IP_ACTIVE_LOW, "SWB:6" ) - PORT_DIPNAME( 0xc0, 0xc0, "Damage Multiplier" ) PORT_DIPLOCATION("SWB:7,8") - PORT_DIPSETTING( 0xc0, "*1" ) - PORT_DIPSETTING( 0x80, "*1.5" ) - PORT_DIPSETTING( 0x40, "*2" ) - PORT_DIPSETTING( 0x00, "*3" ) - - PORT_START("IN0") - TAITO_JOY_LRUD_2_BUTTONS_START( 1 ) - - PORT_START("IN1") - TAITO_JOY_LRUD_2_BUTTONS_START( 2 ) - - COMMON_IN2 - - PORT_START("COIN1") - PORT_BIT( 1, IP_ACTIVE_HIGH, IPT_COIN1 ) - - PORT_START("COIN2") - PORT_BIT( 1, IP_ACTIVE_HIGH, IPT_COIN2 ) -INPUT_PORTS_END - - -static INPUT_PORTS_START( arknoid2 ) - /* 0xb001 (CPU1) port 0 -> 0xe001 (shared RAM) */ - PORT_START("DSWA") - TAITO_MACHINE_COCKTAIL_LOC(SWA) - TAITO_COINAGE_WORLD_LOC(SWA) - - /* 0xb001 (CPU1) port 1 -> 0xe002 (shared RAM) */ - PORT_START("DSWB") - TAITO_DIFFICULTY_LOC(SWB) - PORT_DIPNAME( 0x0c, 0x0c, DEF_STR( Bonus_Life ) ) PORT_DIPLOCATION("SWB:3,4") /* table at 0x6f1e (W and J) or 0x6f1b (Romstar) */ - PORT_DIPSETTING( 0x00, "50k 150k 150k+" ) - PORT_DIPSETTING( 0x0c, "100k 200k 200k+" ) - PORT_DIPSETTING( 0x04, "50k only" ) - PORT_DIPSETTING( 0x08, "100k only" ) - PORT_DIPNAME( 0x30, 0x30, DEF_STR( Lives ) ) PORT_DIPLOCATION("SWB:5,6") - PORT_DIPSETTING( 0x20, "2" ) - PORT_DIPSETTING( 0x30, "3" ) - PORT_DIPSETTING( 0x10, "4" ) - PORT_DIPSETTING( 0x00, "5" ) - PORT_DIPUNUSED_DIPLOC( 0x40, IP_ACTIVE_LOW, "SWB:7" ) - PORT_DIPNAME( 0x80, 0x00, DEF_STR( Allow_Continue ) ) PORT_DIPLOCATION("SWB:8") - PORT_DIPSETTING( 0x80, DEF_STR( No ) ) - PORT_DIPSETTING( 0x00, DEF_STR( Yes ) ) - - PORT_START("IN0") /* read at c000 (sound cpu) */ - PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_BUTTON1 ) PORT_PLAYER(2) - PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_UNKNOWN ) - PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_UNKNOWN ) - PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_START2 ) - PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_BUTTON1 ) - PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_UNKNOWN ) - PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_UNKNOWN ) - PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_START1 ) - - PORT_START("IN1") - PORT_BIT( 0xff, IP_ACTIVE_LOW, IPT_UNUSED ) - - PORT_START("IN2") - PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_SERVICE1 ) PORT_WRITE_LINE_DEVICE_MEMBER("upd4701", upd4701_device, right_w) - PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_TILT ) - PORT_BIT( 0xfc, IP_ACTIVE_LOW, IPT_UNUSED ) - - PORT_START("COIN1") - PORT_BIT( 1, IP_ACTIVE_HIGH, IPT_COIN1 ) PORT_WRITE_LINE_DEVICE_MEMBER("upd4701", upd4701_device, left_w) - - PORT_START("COIN2") - PORT_BIT( 1, IP_ACTIVE_HIGH, IPT_COIN2 ) PORT_WRITE_LINE_DEVICE_MEMBER("upd4701", upd4701_device, middle_w) - - PORT_START("AN1") /* spinner 1 - read at f000/1 */ - PORT_BIT( 0x0fff, 0x0000, IPT_DIAL ) PORT_SENSITIVITY(70) PORT_KEYDELTA(15) PORT_PLAYER(1) PORT_RESET - - PORT_START("AN2") /* spinner 2 - read at f002/3 */ - PORT_BIT( 0x0fff, 0x0000, IPT_DIAL ) PORT_SENSITIVITY(70) PORT_KEYDELTA(15) PORT_PLAYER(2) PORT_RESET -INPUT_PORTS_END - -static INPUT_PORTS_START( arknid2u ) - PORT_INCLUDE( arknoid2 ) - - PORT_MODIFY("DSWA") - TAITO_COINAGE_JAPAN_OLD_LOC(SWA) -INPUT_PORTS_END - - -static INPUT_PORTS_START( drtoppel ) - /* 0xb001 (CPU1) port 0 -> 0xe042 (shared RAM) */ - PORT_START("DSWA") - TAITO_MACHINE_COCKTAIL_LOC(SWA) - TAITO_COINAGE_WORLD_LOC(SWA) - - /* 0xb001 (CPU1) port 1 -> 0xe043 (shared RAM) */ - PORT_START("DSWB") - TAITO_DIFFICULTY_LOC(SWB) - PORT_DIPNAME( 0x0c, 0x0c, DEF_STR( Bonus_Life ) ) PORT_DIPLOCATION("SWB:3,4") /* table at 0x256d (4 * 9 bytes) */ - PORT_DIPSETTING( 0x0c, "30k 100k 200k 100k+" ) /* 30k 100k 200k 300k 400k 500k 600k 700k */ - PORT_DIPSETTING( 0x00, "50k 100k 200k 200k+" ) /* 50k 100k 200k 400k 600k 800k 1000k 1200k */ - PORT_DIPSETTING( 0x04, "30k 100k" ) - PORT_DIPSETTING( 0x08, "30k only" ) - PORT_DIPNAME( 0x30, 0x30, DEF_STR( Lives ) ) PORT_DIPLOCATION("SWB:5,6") - PORT_DIPSETTING( 0x20, "2" ) - PORT_DIPSETTING( 0x30, "3" ) - PORT_DIPSETTING( 0x10, "4" ) - PORT_DIPSETTING( 0x00, "5" ) - PORT_DIPUNUSED_DIPLOC( 0x40, IP_ACTIVE_LOW, "SWB:7" ) - PORT_DIPUNUSED_DIPLOC( 0x80, IP_ACTIVE_LOW, "SWB:8" ) - - PORT_START("IN0") - TAITO_JOY_LRUD_2_BUTTONS_START( 1 ) - - PORT_START("IN1") - TAITO_JOY_LRUD_2_BUTTONS_START( 2 ) - - COMMON_IN2 - - PORT_START("COIN1") - PORT_BIT( 1, IP_ACTIVE_HIGH, IPT_COIN1 ) - - PORT_START("COIN2") - PORT_BIT( 1, IP_ACTIVE_HIGH, IPT_COIN2 ) -INPUT_PORTS_END - -static INPUT_PORTS_START( drtopplu ) - PORT_INCLUDE( drtoppel ) - - PORT_MODIFY("DSWA") - TAITO_COINAGE_JAPAN_OLD_LOC(SWA) -INPUT_PORTS_END - - -static INPUT_PORTS_START( kageki ) - /* special (see kageki_csport_* handlers) -> 0xe03b (shared RAM) */ - PORT_START("DSWA") - TAITO_MACHINE_NO_COCKTAIL_LOC(SWA) /* see notes */ - TAITO_COINAGE_WORLD_LOC(SWA) - - /* special (see kageki_csport_* handlers) -> 0xe03c (shared RAM) */ - PORT_START("DSWB") - TAITO_DIFFICULTY_LOC(SWB) - PORT_DIPUNUSED_DIPLOC( 0x04, IP_ACTIVE_LOW, "SWB:3" ) - PORT_DIPUNUSED_DIPLOC( 0x08, IP_ACTIVE_LOW, "SWB:4" ) - PORT_DIPUNUSED_DIPLOC( 0x10, IP_ACTIVE_LOW, "SWB:5" ) - PORT_DIPUNUSED_DIPLOC( 0x20, IP_ACTIVE_LOW, "SWB:6" ) - PORT_DIPUNUSED_DIPLOC( 0x40, IP_ACTIVE_LOW, "SWB:7" ) - PORT_DIPNAME( 0x80, 0x80, DEF_STR( Allow_Continue ) ) PORT_DIPLOCATION("SWB:8") - PORT_DIPSETTING( 0x00, DEF_STR( No ) ) - PORT_DIPSETTING( 0x80, DEF_STR( Yes ) ) - - PORT_START("IN0") - TAITO_JOY_LRUD_2_BUTTONS_START( 1 ) - - PORT_START("IN1") - TAITO_JOY_LRUD_2_BUTTONS_START( 2 ) - - PORT_START("IN2") - PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_SERVICE1 ) - PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_TILT ) - PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_UNKNOWN ) - PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_UNKNOWN ) - PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_COIN1 ) - PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_COIN2 ) - PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_UNKNOWN ) - PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_UNKNOWN ) -INPUT_PORTS_END - -static INPUT_PORTS_START( kagekiu ) - PORT_INCLUDE( kageki ) - - PORT_MODIFY("DSWA") - TAITO_COINAGE_JAPAN_OLD_LOC(SWA) -INPUT_PORTS_END - -static INPUT_PORTS_START( kagekij ) - PORT_INCLUDE( kagekiu ) - - PORT_MODIFY("DSWA") - TAITO_MACHINE_COCKTAIL_LOC(SWA) /* see notes */ -INPUT_PORTS_END - - -static INPUT_PORTS_START( chukatai ) - /* 0xb001 (CPU1) port 0 -> 0xe015 (shared RAM) */ - PORT_START("DSWA") - TAITO_MACHINE_COCKTAIL_LOC(SWA) - TAITO_COINAGE_WORLD_LOC(SWA) - - /* 0xb001 (CPU1) port 1 -> 0xe016 (shared RAM) */ - PORT_START("DSWB") - TAITO_DIFFICULTY_LOC(SWB) - PORT_DIPNAME( 0x0c, 0x0c, DEF_STR( Bonus_Life ) ) PORT_DIPLOCATION("SWB:3,4") /* tables : 1st at 0xb070 (bank = 0x02) and inc. at 0x09df */ - PORT_DIPSETTING( 0x08, "40k 240k 200k+" ) - PORT_DIPSETTING( 0x0c, "60k 360k 300k+" ) - PORT_DIPSETTING( 0x04, "100k 500k 400k+" ) - PORT_DIPSETTING( 0x00, "150k 650k 500k+" ) - PORT_DIPNAME( 0x30, 0x30, DEF_STR( Lives ) ) PORT_DIPLOCATION("SWB:5,6") - PORT_DIPSETTING( 0x00, "1" ) - PORT_DIPSETTING( 0x10, "2" ) - PORT_DIPSETTING( 0x30, "3" ) - PORT_DIPSETTING( 0x20, "4" ) - PORT_DIPUNUSED_DIPLOC( 0x40, IP_ACTIVE_LOW, "SWB:7" ) - PORT_DIPUNUSED_DIPLOC( 0x80, IP_ACTIVE_LOW, "SWB:8" ) - - PORT_START("IN0") - TAITO_JOY_LRUD_2_BUTTONS_START( 1 ) - - PORT_START("IN1") - TAITO_JOY_LRUD_2_BUTTONS_START( 2 ) - - COMMON_IN2 - - PORT_START("COIN1") - PORT_BIT( 1, IP_ACTIVE_HIGH, IPT_COIN1 ) - - PORT_START("COIN2") - PORT_BIT( 1, IP_ACTIVE_HIGH, IPT_COIN2 ) -INPUT_PORTS_END - -static INPUT_PORTS_START( chukatau ) - PORT_INCLUDE( chukatai ) - - PORT_MODIFY("DSWA") - TAITO_COINAGE_JAPAN_OLD_LOC(SWA) -INPUT_PORTS_END - - -static INPUT_PORTS_START( tnzs ) - /* 0xb002 (CPU1) -> 0xef0e (shared RAM) */ - PORT_START("DSWA") - PORT_DIPNAME( 0x01, 0x00, DEF_STR( Cabinet ) ) PORT_DIPLOCATION("SWA:1") - PORT_DIPSETTING( 0x00, DEF_STR( Upright ) ) - PORT_DIPSETTING( 0x01, DEF_STR( Cocktail ) ) - PORT_DIPNAME( 0x02, 0x02, DEF_STR( Flip_Screen ) ) PORT_DIPLOCATION("SWA:2") - PORT_DIPSETTING( 0x02, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_SERVICE_DIPLOC( 0x04, IP_ACTIVE_LOW, "SWA:3" ) - PORT_DIPNAME( 0x08, 0x08, "Invulnerability (Debug)" ) PORT_DIPLOCATION("SWA:4") // see notes - PORT_DIPSETTING( 0x08, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - TAITO_COINAGE_WORLD_LOC(SWA) - - /* 0xb003 (CPU1) -> 0xef0f (shared RAM) */ - PORT_START("DSWB") - TAITO_DIFFICULTY_LOC(SWB) - PORT_DIPNAME( 0x0c, 0x0c, DEF_STR( Bonus_Life ) ) PORT_DIPLOCATION("SWB:3,4") /* table at 0x09c84 */ - PORT_DIPSETTING( 0x00, "50k 150k 150k+" ) - PORT_DIPSETTING( 0x0c, "70k 200k 200k+" ) - PORT_DIPSETTING( 0x04, "100k 250k 250k+" ) - PORT_DIPSETTING( 0x08, "200k 300k 300k+" ) - PORT_DIPNAME( 0x30, 0x30, DEF_STR( Lives ) ) PORT_DIPLOCATION("SWB:5,6") - PORT_DIPSETTING( 0x20, "2" ) - PORT_DIPSETTING( 0x30, "3" ) - PORT_DIPSETTING( 0x00, "4" ) - PORT_DIPSETTING( 0x10, "5" ) - PORT_DIPNAME( 0x40, 0x40, DEF_STR( Allow_Continue ) ) PORT_DIPLOCATION("SWB:7") - PORT_DIPSETTING( 0x00, DEF_STR( No ) ) - PORT_DIPSETTING( 0x40, DEF_STR( Yes ) ) - PORT_DIPUNUSED_DIPLOC( 0x80, IP_ACTIVE_LOW, "SWB:8" ) - - PORT_START("IN0") - TAITO_JOY_LRUD_2_BUTTONS_START( 1 ) - - PORT_START("IN1") - TAITO_JOY_LRUD_2_BUTTONS_START( 2 ) - - PORT_START("IN2") - PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_SERVICE1 ) - PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_TILT ) - PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_UNKNOWN ) - PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_UNKNOWN ) - PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_COIN1 ) - PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_COIN2 ) - PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_UNKNOWN ) - PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_UNKNOWN ) -INPUT_PORTS_END - -static INPUT_PORTS_START( tnzsj ) - PORT_INCLUDE( tnzs ) - - PORT_MODIFY("DSWA") - TAITO_COINAGE_JAPAN_OLD_LOC(SWA) -INPUT_PORTS_END - -static INPUT_PORTS_START( tnzsjo ) - /* 0xb001 (CPU1) port 0 -> 0xef0e (shared RAM) */ - PORT_START("DSWA") - PORT_DIPNAME( 0x01, 0x00, DEF_STR( Cabinet ) ) PORT_DIPLOCATION("SWA:1") - PORT_DIPSETTING( 0x00, DEF_STR( Upright ) ) - PORT_DIPSETTING( 0x01, DEF_STR( Cocktail ) ) - PORT_DIPNAME( 0x02, 0x02, DEF_STR( Flip_Screen ) ) PORT_DIPLOCATION("SWA:2") - PORT_DIPSETTING( 0x02, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_SERVICE_DIPLOC( 0x04, IP_ACTIVE_LOW, "SWA:3" ) - PORT_DIPNAME( 0x08, 0x08, "Invulnerability (Debug)" ) PORT_DIPLOCATION("SWA:4") // see notes - PORT_DIPSETTING( 0x08, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - TAITO_COINAGE_JAPAN_OLD_LOC(SWA) - - /* 0xb001 (CPU1) port 1 -> 0xef0f (shared RAM) */ - PORT_START("DSWB") - TAITO_DIFFICULTY_LOC(SWB) - PORT_DIPNAME( 0x0c, 0x0c, DEF_STR( Bonus_Life ) ) PORT_DIPLOCATION("SWB:3,4") /* table at 0x09caf */ - PORT_DIPSETTING( 0x00, "50k 150k 150k+" ) - PORT_DIPSETTING( 0x0c, "70k 200k 200k+" ) - PORT_DIPSETTING( 0x04, "100k 250k 250k+" ) - PORT_DIPSETTING( 0x08, "200k 300k 300k+" ) - PORT_DIPNAME( 0x30, 0x30, DEF_STR( Lives ) ) PORT_DIPLOCATION("SWB:5,6") - PORT_DIPSETTING( 0x20, "2" ) - PORT_DIPSETTING( 0x30, "3" ) - PORT_DIPSETTING( 0x00, "4" ) - PORT_DIPSETTING( 0x10, "5" ) - PORT_DIPNAME( 0x40, 0x40, DEF_STR( Allow_Continue ) ) PORT_DIPLOCATION("SWB:7") - PORT_DIPSETTING( 0x00, DEF_STR( No ) ) - PORT_DIPSETTING( 0x40, DEF_STR( Yes ) ) - PORT_DIPUNUSED_DIPLOC( 0x80, IP_ACTIVE_LOW, "SWB:8" ) - - PORT_START("IN0") - TAITO_JOY_LRUD_2_BUTTONS_START( 1 ) - - PORT_START("IN1") - TAITO_JOY_LRUD_2_BUTTONS_START( 2 ) - - COMMON_IN2 - - PORT_START("COIN1") - PORT_BIT( 1, IP_ACTIVE_LOW, IPT_COIN1 ) - - PORT_START("COIN2") - PORT_BIT( 1, IP_ACTIVE_LOW, IPT_COIN2 ) -INPUT_PORTS_END - -static INPUT_PORTS_START( tnzsop ) - PORT_INCLUDE( tnzsjo ) - - PORT_MODIFY("DSWA") - PORT_DIPUNUSED_DIPLOC( 0x08, IP_ACTIVE_LOW, "SWA:4" ) /* value read at 0x356b but not tested nor stored elsewhere */ - TAITO_COINAGE_WORLD_LOC(SWA) - - PORT_MODIFY("DSWB") - PORT_DIPNAME( 0x0c, 0x0c, DEF_STR( Bonus_Life ) ) PORT_DIPLOCATION("SWB:3,4") /* table at 0x09afb */ - PORT_DIPSETTING( 0x00, "10k 100k 100k+" ) - PORT_DIPSETTING( 0x0c, "10k 150k 150k+" ) - PORT_DIPSETTING( 0x04, "10k 200k 200k+" ) - PORT_DIPSETTING( 0x08, "10k 300k 300k+" ) -INPUT_PORTS_END - - -static INPUT_PORTS_START( kabukiz ) - /* 0xb002 (CPU1) */ - PORT_START("DSWA") - TAITO_MACHINE_COCKTAIL_LOC(SWA) - PORT_DIPUNUSED_DIPLOC( 0x10, IP_ACTIVE_LOW, "SWA:5" ) - PORT_DIPUNUSED_DIPLOC( 0x20, IP_ACTIVE_LOW, "SWA:6" ) - PORT_DIPUNUSED_DIPLOC( 0x40, IP_ACTIVE_LOW, "SWA:7" ) - PORT_DIPNAME( 0x80, 0x80, DEF_STR( Allow_Continue ) ) PORT_DIPLOCATION("SWA:8") - PORT_DIPSETTING( 0x00, DEF_STR( No ) ) - PORT_DIPSETTING( 0x80, DEF_STR( Yes ) ) - - /* 0xb003 (CPU1) */ - PORT_START("DSWB") - PORT_DIPNAME( 0x03, 0x02, DEF_STR( Difficulty ) ) PORT_DIPLOCATION("SWB:1,2") // different from many other taito - PORT_DIPSETTING( 0x03, DEF_STR( Easy ) ) // other taito : [ On Off ] < [ Off Off ] < [ Off On ] < [ On On ] - PORT_DIPSETTING( 0x02, DEF_STR( Medium ) ) // kabukiz : [ Off Off ] < [ On Off ] < [ Off On ] < [ On On ] - PORT_DIPSETTING( 0x01, DEF_STR( Hard ) ) - PORT_DIPSETTING( 0x00, DEF_STR( Hardest ) ) - PORT_DIPUNUSED_DIPLOC( 0x04, IP_ACTIVE_LOW, "SWB:3" ) - PORT_DIPUNUSED_DIPLOC( 0x08, IP_ACTIVE_LOW, "SWB:4" ) - TAITO_COINAGE_WORLD_LOC(SWB) - - PORT_START("IN0") - TAITO_JOY_LRUD_2_BUTTONS_START( 1 ) - - PORT_START("IN1") - TAITO_JOY_LRUD_2_BUTTONS_START( 2 ) - - PORT_START("IN2") - PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_SERVICE1 ) - PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_UNKNOWN ) - PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_UNKNOWN ) - PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_UNKNOWN ) - PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_COIN1 ) - PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_COIN2 ) - PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_UNKNOWN ) - PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_UNKNOWN ) -INPUT_PORTS_END - -static INPUT_PORTS_START( kabukizj ) - PORT_INCLUDE( kabukiz ) - - PORT_MODIFY("DSWB") - TAITO_COINAGE_JAPAN_OLD_LOC(SWB) -INPUT_PORTS_END - - -static INPUT_PORTS_START( insectx ) - /* 0xb001 (CPU1) port 0 -> 0xec06 (shared RAM) */ - PORT_START("DSWA") - TAITO_MACHINE_COCKTAIL_LOC(SWA) - TAITO_COINAGE_WORLD_LOC(SWA) - - /* 0xb001 (CPU1) port 1 -> 0xec07 (shared RAM) */ - PORT_START("DSWB") - PORT_DIPNAME( 0x03, 0x03, DEF_STR( Difficulty ) ) PORT_DIPLOCATION("SWB:1,2") /* see notes */ - PORT_DIPSETTING( 0x01, DEF_STR( Easy ) ) // other taito : [ On Off ] < [ Off Off ] < [ Off On ] < [ On On ] - PORT_DIPSETTING( 0x03, DEF_STR( Medium ) ) // notes : [ Off On ] < [ Off Off ] < [ On Off ] < [ On On ] - PORT_DIPSETTING( 0x02, DEF_STR( Hard ) ) // manual : [ Off Off ] < [ On Off ] < [ Off On ] < [ On On ] - PORT_DIPSETTING( 0x00, DEF_STR( Hardest ) ) - PORT_DIPNAME( 0x0c, 0x0c, DEF_STR( Bonus_Life ) ) PORT_DIPLOCATION("SWB:3,4") /* code at 0xaacc - bank = 0x02 */ - PORT_DIPSETTING( 0x08, "40k 240k 200k+" ) - PORT_DIPSETTING( 0x0c, "60k 360k 300k+" ) - PORT_DIPSETTING( 0x04, "100k 500k 400k+" ) - PORT_DIPSETTING( 0x00, "150k 650k 500k+" ) - PORT_DIPNAME( 0x30, 0x30, DEF_STR( Lives ) ) PORT_DIPLOCATION("SWB:5,6") - PORT_DIPSETTING( 0x00, "1" ) - PORT_DIPSETTING( 0x10, "2" ) - PORT_DIPSETTING( 0x30, "3" ) - PORT_DIPSETTING( 0x20, "4" ) - PORT_DIPUNUSED_DIPLOC( 0x40, IP_ACTIVE_LOW, "SWB:7" ) - PORT_DIPUNUSED_DIPLOC( 0x80, IP_ACTIVE_LOW, "SWB:8" ) - - PORT_START("IN0") - TAITO_JOY_LRUD_2_BUTTONS_START( 1 ) - - PORT_START("IN1") - TAITO_JOY_LRUD_2_BUTTONS_START( 2 ) - - PORT_START("IN2") - PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_SERVICE1 ) - PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_TILT ) - PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_COIN2 ) - PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_COIN1 ) - PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_UNKNOWN ) - PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_UNKNOWN ) - PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_UNKNOWN ) - PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_UNKNOWN ) -INPUT_PORTS_END - -static INPUT_PORTS_START( insectxj ) - PORT_INCLUDE( insectx ) - - PORT_MODIFY("DSWA") - TAITO_COINAGE_JAPAN_OLD_LOC(SWA) -INPUT_PORTS_END - - -static INPUT_PORTS_START( jpopnics ) - /* 0xc600 (CPU1) -> 0xef0e (shared RAM) */ - PORT_START("DSWA") - PORT_DIPNAME( 0x01, 0x01, DEF_STR( Unknown ) ) PORT_DIPLOCATION("SWA:1") /* code at 0x6e99 - is it ever called ? */ - PORT_DIPSETTING( 0x01, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - TAITO_DSWA_BITS_1_TO_3 - PORT_DIPUNUSED_DIPLOC( 0x10, IP_ACTIVE_LOW, "SWA:5" ) /* see notes */ - PORT_DIPUNUSED_DIPLOC( 0x20, IP_ACTIVE_LOW, "SWA:6" ) /* see notes */ - PORT_DIPUNUSED_DIPLOC( 0x40, IP_ACTIVE_LOW, "SWA:7" ) /* see notes */ - PORT_DIPUNUSED_DIPLOC( 0x80, IP_ACTIVE_LOW, "SWA:8" ) /* see notes */ - - /* 0xc601 (CPU1) -> 0xef0f (shared RAM) */ - PORT_START("DSWB") - TAITO_DIFFICULTY_LOC(SWB) - PORT_DIPNAME( 0x0c, 0x0c, DEF_STR( Bonus_Life ) ) PORT_DIPLOCATION("SWB:3,4") /* table at 0x2b86 */ - PORT_DIPSETTING( 0x08, "50k 200k 150k+" ) - PORT_DIPSETTING( 0x0c, "50k 250k 200k+" ) - PORT_DIPSETTING( 0x04, "100k 300k 200k+" ) - PORT_DIPSETTING( 0x00, "100k 400k 300k+" ) - PORT_DIPNAME( 0x30, 0x30, DEF_STR( Lives ) ) PORT_DIPLOCATION("SWB:5,6") - PORT_DIPSETTING( 0x20, "2" ) - PORT_DIPSETTING( 0x30, "3" ) - PORT_DIPSETTING( 0x10, "4" ) - PORT_DIPSETTING( 0x00, "5" ) - PORT_DIPNAME( 0x40, 0x40, "P1 & P2 Children Collision" ) PORT_DIPLOCATION("SWB:7") /* code at 0x3dcc */ - PORT_DIPSETTING( 0x40, DEF_STR( No ) ) // both players' children collide with each other / Off=No / On=Yes - PORT_DIPSETTING( 0x00, DEF_STR( Yes ) ) - PORT_DIPNAME( 0x80, 0x80, DEF_STR( Allow_Continue ) ) PORT_DIPLOCATION("SWB:8") - PORT_DIPSETTING( 0x00, DEF_STR( No ) ) - PORT_DIPSETTING( 0x80, DEF_STR( Yes ) ) - - PORT_START("IN0") - PORT_BIT( 0xff, IP_ACTIVE_LOW, IPT_UNUSED ) - - PORT_START("IN1") - PORT_BIT( 0x0f, IP_ACTIVE_LOW, IPT_UNUSED ) - PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_BUTTON1 ) PORT_PLAYER(1) - PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_BUTTON2 ) PORT_PLAYER(1) PORT_NAME("P1 Button 2 (Cheat)") - PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_COIN1 ) - PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_START1 ) - - PORT_START("IN2") - PORT_BIT( 0x0f, IP_ACTIVE_LOW, IPT_UNUSED ) - PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_BUTTON1 ) PORT_PLAYER(2) - PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_BUTTON2 ) PORT_PLAYER(2) PORT_NAME("P2 Button 2 (Cheat)") /* not working ? */ - PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_COIN2 ) - PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_START2 ) - - PORT_START("AN1") /* spinner 1 - read at f000/1 */ - PORT_BIT( 0x0fff, 0x0000, IPT_DIAL ) PORT_SENSITIVITY(70) PORT_KEYDELTA(15) PORT_PLAYER(1) PORT_RESET - - PORT_START("AN2") /* spinner 2 - read at f002/3 */ - PORT_BIT( 0x0fff, 0x0000, IPT_DIAL ) PORT_SENSITIVITY(70) PORT_KEYDELTA(15) PORT_PLAYER(2) PORT_RESET -INPUT_PORTS_END - - -static const gfx_layout tnzs_charlayout = -{ - 16,16, - RGN_FRAC(1,4), - 4, - { RGN_FRAC(3,4), RGN_FRAC(2,4), RGN_FRAC(1,4), RGN_FRAC(0,4) }, - { 0, 1, 2, 3, 4, 5, 6, 7, - 8*8+0, 8*8+1, 8*8+2, 8*8+3, 8*8+4, 8*8+5, 8*8+6, 8*8+7 }, - { 0*8, 1*8, 2*8, 3*8, 4*8, 5*8, 6*8, 7*8, - 16*8, 17*8, 18*8, 19*8, 20*8, 21*8, 22*8, 23*8 }, - 32*8 -}; - -static const gfx_layout insectx_charlayout = -{ - 16,16, - 8192, - 4, - { 8, 0, 8192*64*8+8, 8192*64*8 }, - { 0, 1, 2, 3, 4, 5, 6, 7, - 8*16+0, 8*16+1, 8*16+2, 8*16+3, 8*16+4, 8*16+5, 8*16+6, 8*16+7 }, - { 0*16, 1*16, 2*16, 3*16, 4*16, 5*16, 6*16, 7*16, - 16*16, 17*16, 18*16, 19*16, 20*16, 21*16, 22*16, 23*16 }, - 64*8 -}; - -static GFXDECODE_START( gfx_tnzs ) - GFXDECODE_ENTRY( "gfx1", 0, tnzs_charlayout, 0, 32 ) -GFXDECODE_END - -static GFXDECODE_START( gfx_insectx ) - GFXDECODE_ENTRY( "gfx1", 0, insectx_charlayout, 0, 32 ) -GFXDECODE_END - -void tnzs_base_state::tnzs_base(machine_config &config) -{ - /* basic machine hardware */ - Z80(config, m_maincpu, XTAL(12'000'000)/2); /* 6.0 MHz ??? - Main board Crystal is 12MHz, verified on insectx, kageki, tnzsb */ - m_maincpu->set_addrmap(AS_PROGRAM, &tnzs_base_state::main_map); - m_maincpu->set_vblank_int("screen", FUNC(tnzs_base_state::irq0_line_hold)); - - Z80(config, m_subcpu, XTAL(12'000'000)/2); /* 6.0 MHz ??? - Main board Crystal is 12MHz, verified on insectx, kageki, tnzsb */ - m_subcpu->set_addrmap(AS_PROGRAM, &tnzs_base_state::base_sub_map); - m_subcpu->set_vblank_int("screen", FUNC(tnzs_base_state::irq0_line_hold)); - - tnzs_mainbank(config); - - config.set_perfect_quantum(m_maincpu); - - /* video hardware */ - SETA001_SPRITE(config, m_seta001, 0); - m_seta001->set_gfxdecode_tag("gfxdecode"); - - SCREEN(config, m_screen, SCREEN_TYPE_RASTER); - m_screen->set_refresh_hz(60); - m_screen->set_vblank_time(ATTOSECONDS_IN_USEC(0)); - m_screen->set_size(32*8, 32*8); - m_screen->set_visarea(0*8, 32*8-1, 2*8, 30*8-1); - m_screen->set_screen_update(FUNC(tnzs_base_state::screen_update_tnzs)); - m_screen->screen_vblank().set(FUNC(tnzs_base_state::screen_vblank_tnzs)); - m_screen->set_palette(m_palette); - - GFXDECODE(config, m_gfxdecode, m_palette, gfx_tnzs); - PALETTE(config, m_palette).set_format(palette_device::xRGB_555, 512); - - /* sound hardware */ - SPEAKER(config, "speaker").front_center(); -} - -void tnzs_mcu_state::tnzs(machine_config &config) -{ - tnzs_base(config); - I8742(config, m_mcu, 12000000/2); /* 400KHz ??? - Main board Crystal is 12MHz */ - m_mcu->p1_in_cb().set(FUNC(tnzs_mcu_state::mcu_port1_r)); - m_mcu->p2_in_cb().set(FUNC(tnzs_mcu_state::mcu_port2_r)); - m_mcu->p2_out_cb().set(FUNC(tnzs_mcu_state::mcu_port2_w)); - m_mcu->t0_in_cb().set_ioport("COIN1"); - m_mcu->t1_in_cb().set_ioport("COIN2"); - - m_subcpu->set_addrmap(AS_PROGRAM, &tnzs_mcu_state::tnzs_sub_map); - - /* video hardware */ - m_screen->set_refresh_hz(59.15); /* it should be the same as the newer pcb vsync */ - m_screen->set_vblank_time(ATTOSECONDS_IN_USEC(2500)); /* not accurate */ - - /* sound hardware */ - ym2203_device &ymsnd(YM2203(config, "ymsnd", XTAL(12'000'000)/4)); - ymsnd.port_a_read_callback().set_ioport("DSWA"); - ymsnd.port_b_read_callback().set_ioport("DSWB"); - ymsnd.add_route(ALL_OUTPUTS, "speaker", 0.3); -} - -void extrmatn_state::extrmatn(machine_config &config) -{ - tnzs(config); - - /* basic machine hardware */ - m_maincpu->set_addrmap(AS_PROGRAM, &extrmatn_state::prompal_main_map); - - /* video hardware */ - m_screen->set_refresh_hz(60); - m_screen->set_vblank_time(ATTOSECONDS_IN_USEC(0)); - - m_palette->set_init(FUNC(extrmatn_state::prompalette)); -} - -void extrmatn_state::plumppop(machine_config &config) -{ - extrmatn(config); - - UPD4701A(config, m_upd4701); - m_upd4701->set_portx_tag("AN1"); - m_upd4701->set_porty_tag("AN2"); -} - -void arknoid2_state::arknoid2(machine_config &config) -{ - plumppop(config); - - /* basic machine hardware */ - m_maincpu->set_vblank_int("screen", FUNC(arknoid2_state::mcu_interrupt)); - m_subcpu->set_addrmap(AS_PROGRAM, &arknoid2_state::arknoid2_sub_map); - - subdevice<cpu_device>("mcu")->set_disable(); -} - -void insectx_state::insectx(machine_config &config) -{ - tnzs_base(config); - - /* basic machine hardware */ - m_subcpu->set_addrmap(AS_PROGRAM, &insectx_state::insectx_sub_map); - - /* video hardware */ - m_gfxdecode->set_info(gfx_insectx); - - /* sound hardware */ - ym2203_device &ymsnd(YM2203(config, "ymsnd", XTAL(12'000'000)/4)); /* verified on pcb */ - ymsnd.port_a_read_callback().set_ioport("DSWA"); - ymsnd.port_b_read_callback().set_ioport("DSWB"); - ymsnd.add_route(ALL_OUTPUTS, "speaker", 0.3); -} - -void kageki_state::kageki(machine_config &config) -{ - tnzs_base(config); - - /* basic machine hardware */ - m_subcpu->set_addrmap(AS_PROGRAM, &kageki_state::kageki_sub_map); - - /* sound hardware */ - ym2203_device &ymsnd(YM2203(config, "ymsnd", XTAL(12'000'000)/4)); /* verified on pcb */ - ymsnd.port_a_read_callback().set(FUNC(kageki_state::csport_r)); - ymsnd.port_b_write_callback().set(FUNC(kageki_state::csport_w)); - ymsnd.add_route(0, "speaker", 0.15); - ymsnd.add_route(1, "speaker", 0.15); - ymsnd.add_route(2, "speaker", 0.15); - ymsnd.add_route(3, "speaker", 0.35); - - SAMPLES(config, m_samples); - m_samples->set_channels(1); - m_samples->set_samples_start_callback(FUNC(kageki_state::init_samples)); - m_samples->add_route(ALL_OUTPUTS, "speaker", 1.0); -} - -void tnzsb_state::tnzsb(machine_config &config) -{ - tnzs_base(config); - - /* basic machine hardware */ - m_maincpu->set_addrmap(AS_PROGRAM, &tnzsb_state::tnzsb_main_map); - m_subcpu->set_addrmap(AS_PROGRAM, &tnzsb_state::tnzsb_sub_map); - - Z80(config, m_audiocpu, XTAL(12'000'000)/2); /* verified on pcb */ - m_audiocpu->set_addrmap(AS_PROGRAM, &tnzsb_state::tnzsb_cpu2_map); - m_audiocpu->set_addrmap(AS_IO, &tnzsb_state::tnzsb_io_map); - - /* video hardware */ - m_screen->set_refresh_hz(59.15); /* verified on pcb */ - - /* sound hardware */ - GENERIC_LATCH_8(config, m_soundlatch); - - ym2203_device &ymsnd(YM2203(config, "ymsnd", XTAL(12'000'000)/4)); /* verified on pcb */ - ymsnd.irq_handler().set(FUNC(tnzsb_state::ym2203_irqhandler)); - ymsnd.add_route(0, "speaker", 1.0); - ymsnd.add_route(1, "speaker", 1.0); - ymsnd.add_route(2, "speaker", 1.0); - ymsnd.add_route(3, "speaker", 2.0); -} - -void kabukiz_state::kabukiz(machine_config &config) -{ - tnzsb(config); - - /* basic machine hardware */ - m_subcpu->set_addrmap(AS_PROGRAM, &kabukiz_state::kabukiz_sub_map); - m_audiocpu->set_addrmap(AS_PROGRAM, &kabukiz_state::kabukiz_cpu2_map); - - /* sound hardware */ - ym2203_device &ymsnd(*subdevice<ym2203_device>("ymsnd")); - ymsnd.port_a_write_callback().set(FUNC(kabukiz_state::sound_bank_w)); - ymsnd.port_b_write_callback().set("dac", FUNC(dac_byte_interface::data_w)); - - DAC_8BIT_R2R(config, "dac", 0).add_route(ALL_OUTPUTS, "speaker", 0.5); // unknown DAC - voltage_regulator_device &vref(VOLTAGE_REGULATOR(config, "vref", 0)); - vref.add_route(0, "dac", 1.0, DAC_VREF_POS_INPUT); - vref.add_route(0, "dac", -1.0, DAC_VREF_NEG_INPUT); -} - -void jpopnics_state::jpopnics(machine_config &config) -{ - tnzs_base(config); - - /* basic machine hardware */ - m_maincpu->set_addrmap(AS_PROGRAM, &jpopnics_state::jpopnics_main_map); - m_subcpu->set_addrmap(AS_PROGRAM, &jpopnics_state::jpopnics_sub_map); - - UPD4701A(config, m_upd4701); - m_upd4701->set_portx_tag("AN1"); - m_upd4701->set_porty_tag("AN2"); - - /* video hardware */ - m_palette->set_format(palette_device::GBRx_444, 1024); // wrong, the other 4 bits seem to be used as well - m_palette->set_endianness(ENDIANNESS_BIG); - - /* sound hardware */ - YM2151(config, "ymsnd", XTAL(12'000'000)/4).add_route(ALL_OUTPUTS, "speaker", 0.3); /* Not verified - Main board Crystal is 12MHz */ -} - -/*************************************************************************** - - PCBs - -***************************************************************************/ -/* The TNZS/Seta hardware has a variety of somewhat different pcbs, all of - which have both Seta and Taito Part numbers. - All pcbs have Z80B processors and one 6264 main RAM chip and an X1-001 - and X1-002 video chip and an X1-004 I/O? Chip, and four PALs - -Seta# Taito#s CPUS RxM2 ROM1 MCU? Video RAM PROMs SETA X1 GFXROMs QUADRATURE ESD. PROT Games Picture -P0-022-A K1100245A J1100108A 2xZ80B 512/256 512/256 8042 4x6116 Yes, 2 03 23c1000 uPD4701AC 3x X2-003*4 arkanoid2 http://www.classicarcaderesource.com/RevengeOfDoh3.jpg -P0-022-B K1100234A J1100108A 2xZ80B 512/256 512/256 8042 4x6116 Yes, 2 03 27c512(A) uPD4701AC 3x X2-003*4 plumppop N/A -P0-025-A K1100241A J1100107A 2xZ80B 512/256 512/256 8042 4x6116 Yes, 2 03 23c1000 N/A 3x X2-003 drtoppel,extermatn,chukatai(B) http://arcade.ym2149.com/pcb/taito/drtoppel_pcb_partside.jpg -P0-028-A K1100416A J1100332A 2xZ80B 512/256 512/256 8042 4x6116 No 05,06 23c1000 N/A 3x X2-004 chukatai(B) http://i.ebayimg.com/images/g/AhoAAOSw-FZXj5A5/s-l1600.jpg -P0-038A M6100309A 3xZ80B 512/256 512/256 NONE 1x6164 No 05,06 23c1000 N/A 3x X2-003 kageki http://i.ebayimg.com/images/a/(KGrHqJ,!lwE6C8-G97lBOjOu9mwVw~~/s-l1600.jpg -P0-041-1 CA403001A 2xZ80B 61256 27c1000 8742 1x6164 No 05,06 27c1000 N/A 5x X2-005 tnzsop(C) http://arcade.ym2149.com/pcb/taito/tnzs_pcb3_partside.jpg -P0-041-A K1100356A J1100156A 2xZ80B 61256 27c1000 8042 1x6164 No 05,06 23c1000 N/A 5x X2-005 tnzs(j,u)o http://arcade.ym2149.com/pcb/taito/tnzs_pcb1_partside.jpg -P0-043A M6100356A 3xZ80B* 61256 27512** NONE 1x6164 No 05,06 LH534000* N/A 4x X2-004 tnzs(j,u), kabukiz http://arcade.ym2149.com/pcb/taito/tnzs_pcb2_mainboard_partside.jpg -P0-056A K1100476A J1100201A 3xZ80B EMPTY*3 27c1000 NONE 1x6164 No 05,06 LH534000 N/A 5x X2-005 insectx(D) http://www.jammarcade.net/images/2014/04/InsectorX.jpg - -(A) GFX ROM mapping is slightly different to P0-022-A pcb, possibly configured - by a jumper. -(B) chukatai has one set which unlike its earlier sets uses the P0-025-A - PCB, but with a daughterboard which converts four of the 23c1000 gfx ROM - sockets into 8 27c1000 EPROM sockets, and DOES use color PROMs! - The other pcb set uses P0-028-A pcb and 23c1000 mask ROMs and color RAM, - but has lower ROM id numbers. The higher numbered set was likely created - by Taito to 'use up' a stock of older P0-025-A pcbs. -(C) This is a development/prototype PCB, hence it has 32 pin sockets for the - gfx ROMs as 27c1000 EPROMs, instead of 28 pin sockets for 23c1000 mask - ROMs. It also uses an (unprotected?) 8742 MCU. - Another curious thing is the Taito ID number may have accidentally been - printed in backwards order, i.e should be C1100304A which fits the pattern - of the other boards. -(D) InsectorX has a lot of rework on its PCB, two greenwires for each of the - two LH534000 mask ROMs, and four wires connected to the X1-004 I/O chip - pins 18, 19, 20, and 21, connecting it to the 4 input pins of a Toshiba - TD62064AP Darlington driver @ U43. -* tnzs(j,u) uses a sub board with a z80b and 23c1000 mask ROMs on it for gfx, - plugged into the four LH534000 mask ROM sockets and the 2nd z80 socket. - Like Kageki's P0-038A mainboard, this mainboard has a third z80 on it which - acts in place of the 8x42 mcu used by the older tnzs sets. -** This is a 28-pin 27512 in a 32-pin socket which alternately holds a 27c1000. -*3 This is unpopulated, but the pcb can accept a 61256 SRAM here. -*4 arkanoid2 and plumppop lack all but one or two buttons, so two of the three - ESD protection modules are unpopulated. -*/ - - -/*************************************************************************** - - Game driver(s) - -***************************************************************************/ - -ROM_START( plumppop ) - ROM_REGION( 0x20000, "maincpu", 0 ) /* 64k + bankswitch areas for the first CPU */ - ROM_LOAD( "a98__09.11c", 0x00000, 0x10000, CRC(107f9e06) SHA1(0aa7f32721c3cab96eccc7c831b9f57877c4e1dc) ) - ROM_LOAD( "a98__10.9c", 0x10000, 0x10000, CRC(df6e6af2) SHA1(792f97f587e84cdd67f0d1efe1fd13ea904d7e20) ) - - ROM_REGION( 0x10000, "sub", 0 ) /* 64k for the second CPU */ - ROM_LOAD( "a98__11.4e", 0x00000, 0x10000, CRC(bc56775c) SHA1(0c22c22c0e9d7ec0e34f8ab4bfe61068f65e8759) ) - - ROM_REGION( 0x10000, "mcu", 0 ) /* M-Chip (i8x42 internal ROM) */ - ROM_LOAD( "b06__14.1g", 0x0000, 0x0800, CRC(28907072) SHA1(21c7017af8a8ceb8e43d7e798f48518b136fd45c) ) /* Labeled B06-14 and under printed label "Taito M-001, 128P, 720100", is a mask 8042 */ - - ROM_REGION( 0x100000, "gfx1", 0 ) - ROM_LOAD( "a98__01.mbm27c512.13a", 0x00000, 0x10000, CRC(f3033dca) SHA1(130744998f0531a82de2814231dddea3ad710f60) ) - ROM_RELOAD( 0x10000, 0x10000 ) - ROM_LOAD( "a98__02.mbm27c512.12a", 0x20000, 0x10000, CRC(f2d17b0c) SHA1(418c8e383b8d4d54d723ae3512829a95e6897ee1) ) - ROM_RELOAD( 0x30000, 0x10000 ) - ROM_LOAD( "a98__03.mbm27c512.10a", 0x40000, 0x10000, CRC(1a519b0a) SHA1(9217c6bf564ccd4a44f9cf2045102e667dc0b036) ) - ROM_RELOAD( 0x40000, 0x10000 ) - ROM_LOAD( "a98__04.mbm27c512.8a", 0x60000, 0x10000, CRC(b64501a1) SHA1(6d96172b7d7d2276787013fe6b47bb7fef0a4e36) ) - ROM_RELOAD( 0x70000, 0x10000 ) - ROM_LOAD( "a98__05.mbm27c512.7a", 0x80000, 0x10000, CRC(45c36963) SHA1(2f23bff22e218f542c50bf7e4ae8ab6db93180b0) ) - ROM_RELOAD( 0x90000, 0x10000 ) - ROM_LOAD( "a98__06.mbm27c512.5a", 0xa0000, 0x10000, CRC(e075341b) SHA1(b5e68b5da7933c7eff21fa832e089edcbb49cdb4) ) - ROM_RELOAD( 0xb0000, 0x10000 ) - ROM_LOAD( "a98__07.mbm27c512.4a", 0xc0000, 0x10000, CRC(8e16cd81) SHA1(6bc9dc8e29197b75c3c4ac4f066037bb9b8cebb4) ) - ROM_RELOAD( 0xd0000, 0x10000 ) - ROM_LOAD( "a98__08.mbm27c512.2a", 0xe0000, 0x10000, CRC(bfa7609a) SHA1(0b9aa89b5954334f40dda1f14b1691852c74fc37) ) - ROM_RELOAD( 0xf0000, 0x10000 ) - - ROM_REGION( 0x0400, "proms", 0 ) /* color PROMs */ - ROM_LOAD( "a98-13.15f", 0x0000, 0x200, CRC(7cde2da5) SHA1(0cccfc35fb716ebb4cffa85c75681f33ca80a56e) ) /* hi bytes, AM27S29 or compatible like MB7124 */ - ROM_LOAD( "a98-12.17f", 0x0200, 0x200, CRC(90dc9da7) SHA1(f719dead7f4597e5ee6f1103599505b98cb58299) ) /* lo bytes, AM27S29 or compatible like MB7124 */ - - ROM_REGION( 0x10000, "pal", 0 ) /* pals on plumppop are the same set as arkanoid2/extrmatn/drtoppel/chukataio/etc with the exception of d9? */ - ROM_LOAD( "b06-10-1.pal16l8a.d9.jed", 0x00000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-11.pal16l8a.d6.jed", 0x01000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-12.pal16l8a.c3.jed", 0x02000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-13.pal16l8a.c2.jed", 0x03000, 0x01000, NO_DUMP) -ROM_END - -ROM_START( jpopnics ) - ROM_REGION( 0x20000, "maincpu", 0 ) /* 64k + bankswitch areas for the first CPU */ - ROM_LOAD( "u96cpu2", 0x00000, 0x20000, CRC(649e951c) SHA1(b26bb157da9fcf5d3eddbb637a4cb2cb1b0fedac) ) - - ROM_REGION( 0x10000, "sub", 0 ) /* 64k for the second CPU */ - ROM_LOAD( "u124cpu1", 0x00000, 0x10000, CRC(8453e8e4) SHA1(aac1bd501a15f79e3ed566c949504169b2aa762d) ) - - ROM_REGION( 0x100000, "gfx1", 0 ) - ROM_LOAD( "u94gfx", 0x00000, 0x10000, CRC(e49f2fdd) SHA1(6824c6520d0039c062f028e69cbfa7b3790ea756) ) - ROM_CONTINUE( 0x20000, 0x10000 ) - ROM_LOAD( "u93gfx", 0x40000, 0x10000, CRC(a7791b5b) SHA1(4abfe9b2612ed0d17f1282a60879cf1d0620ae4c) ) - ROM_CONTINUE( 0x60000, 0x10000 ) - ROM_LOAD( "u92gfx", 0x80000, 0x10000, CRC(b30caac7) SHA1(a434f67e1bec9848d9c3e184734d8cebee048176) ) - ROM_CONTINUE( 0xa0000, 0x10000 ) - ROM_LOAD( "u91gfx", 0xc0000, 0x10000, CRC(18ada5f2) SHA1(3307dd11e5cd0d0abe8b7751a5fbf54998558b34) ) - ROM_CONTINUE( 0xe0000, 0x10000 ) -ROM_END - -ROM_START( extrmatn ) - ROM_REGION( 0x20000, "maincpu", 0 ) /* Region 0 - main cpu */ - ROM_LOAD( "b06-05.11c", 0x00000, 0x10000, CRC(918e1fe3) SHA1(1aa69e7ae393f275d440b3d5bf817475e443045d) ) - ROM_LOAD( "b06-06.9c", 0x10000, 0x10000, CRC(8842e105) SHA1(68675e77801504c5f67f82fae42f55152ffadebe) ) - - ROM_REGION( 0x10000, "sub", 0 ) /* Region 2 - sound cpu */ - ROM_LOAD( "b06-19.4e", 0x00000, 0x10000, CRC(8de43ed9) SHA1(53e6d8fa93889c38733d169e983f2caf1da71f43) ) - - ROM_REGION( 0x10000, "mcu", 0 ) /* M-Chip (i8x42 internal ROM) */ - ROM_LOAD( "b06__14.1g", 0x0000, 0x0800, CRC(28907072) SHA1(21c7017af8a8ceb8e43d7e798f48518b136fd45c) ) /* Labeled B06-14 and under printed label "Taito M-001, 128P, 720100", is a mask 8042 */ - - ROM_REGION( 0x80000, "gfx1", 0 ) - ROM_LOAD( "b06-01.13a", 0x00000, 0x20000, CRC(d2afbf7e) SHA1(28b4cf94798f049a9f8375464741dbef208d7290) ) - ROM_LOAD( "b06-02.10a", 0x20000, 0x20000, CRC(e0c2757a) SHA1(3c89044caa28b10b4d1bef1515881810c23d312a) ) - ROM_LOAD( "b06-03.7a", 0x40000, 0x20000, CRC(ee80ab9d) SHA1(f4e4833cadff7d856b5a8075a61d902427653e16) ) - ROM_LOAD( "b06-04.4a", 0x60000, 0x20000, CRC(3697ace4) SHA1(6d6e4e64147365bcfcf74a84eb7ae84dffedd304) ) - - ROM_REGION( 0x0400, "proms", 0 ) - ROM_LOAD( "b06-09.15f", 0x00000, 0x200, CRC(f388b361) SHA1(f00db6ad6994cfe9b7ad76e30b7049b11f8c16e4) ) /* hi bytes, AM27S29 or compatible like MB7124 */ - ROM_LOAD( "b06-08.17f", 0x00200, 0x200, CRC(10c9aac3) SHA1(09d6f791dea358e78099af7a370b00b8504ffc97) ) /* lo bytes, AM27S29 or compatible like MB7124 */ - - ROM_REGION( 0x10000, "pal", 0 ) /* these are shared with several other games on this hardware */ - ROM_LOAD( "b06-10.pal16l8a.d9.jed", 0x00000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-11.pal16l8a.d6.jed", 0x01000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-12.pal16l8a.c3.jed", 0x02000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-13.pal16l8a.c2.jed", 0x03000, 0x01000, NO_DUMP) -ROM_END - -ROM_START( extrmatnu ) - ROM_REGION( 0x20000, "maincpu", 0 ) /* Region 0 - main cpu */ - ROM_LOAD( "b06-20.11c", 0x00000, 0x10000, CRC(04e3fc1f) SHA1(b1cf2f79f43fa33d6175368c897f84ec6aa6e746) ) - ROM_LOAD( "b06-21.9c", 0x10000, 0x10000, CRC(1614d6a2) SHA1(f23d465af231ab5653c55748f686d8f25f52394b) ) - - ROM_REGION( 0x10000, "sub", 0 ) /* Region 2 - sound cpu */ - ROM_LOAD( "b06-22.4e", 0x00000, 0x10000, CRC(744f2c84) SHA1(7565c1594c2a3bae1ae45afcbf93363fe2b12d58) ) - - ROM_REGION( 0x10000, "mcu", 0 ) /* M-Chip (i8x42 internal ROM) */ - ROM_LOAD( "b06__14.1g", 0x0000, 0x0800, CRC(28907072) SHA1(21c7017af8a8ceb8e43d7e798f48518b136fd45c) ) /* Labeled B06-14 and under printed label "Taito M-001, 128P, 720100", is a mask 8042 */ - - ROM_REGION( 0x80000, "gfx1", 0 ) - ROM_LOAD( "b06-01.13a", 0x00000, 0x20000, CRC(d2afbf7e) SHA1(28b4cf94798f049a9f8375464741dbef208d7290) ) - ROM_LOAD( "b06-02.10a", 0x20000, 0x20000, CRC(e0c2757a) SHA1(3c89044caa28b10b4d1bef1515881810c23d312a) ) - ROM_LOAD( "b06-03.7a", 0x40000, 0x20000, CRC(ee80ab9d) SHA1(f4e4833cadff7d856b5a8075a61d902427653e16) ) - ROM_LOAD( "b06-04.4a", 0x60000, 0x20000, CRC(3697ace4) SHA1(6d6e4e64147365bcfcf74a84eb7ae84dffedd304) ) - - ROM_REGION( 0x0400, "proms", 0 ) - ROM_LOAD( "b06-09.15f", 0x00000, 0x200, CRC(f388b361) SHA1(f00db6ad6994cfe9b7ad76e30b7049b11f8c16e4) ) /* hi bytes, AM27S29 or compatible like MB7124 */ - ROM_LOAD( "b06-08.17f", 0x00200, 0x200, CRC(10c9aac3) SHA1(09d6f791dea358e78099af7a370b00b8504ffc97) ) /* lo bytes, AM27S29 or compatible like MB7124 */ - - ROM_REGION( 0x10000, "pal", 0 ) /* these are shared with several other games on this hardware */ - ROM_LOAD( "b06-10.pal16l8a.d9.jed", 0x00000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-11.pal16l8a.d6.jed", 0x01000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-12.pal16l8a.c3.jed", 0x02000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-13.pal16l8a.c2.jed", 0x03000, 0x01000, NO_DUMP) -ROM_END - -ROM_START( extrmatnur ) - ROM_REGION( 0x20000, "maincpu", 0 ) /* Region 0 - main cpu */ - ROM_LOAD( "b06-15.11c", 0x00000, 0x10000, CRC(4b3ee597) SHA1(024964faebd0fa894ab4868a8e009267e828cbfb) ) - ROM_LOAD( "b06-16.9c", 0x10000, 0x10000, CRC(86175ea4) SHA1(0f30cbb1a6a32355528543707799f752a1b9b75e) ) - - ROM_REGION( 0x10000, "sub", 0 ) /* Region 2 - sound cpu */ - ROM_LOAD( "b06-17.4e", 0x00000, 0x10000, CRC(744f2c84) SHA1(7565c1594c2a3bae1ae45afcbf93363fe2b12d58) ) - - ROM_REGION( 0x10000, "mcu", 0 ) /* M-Chip (i8x42 internal ROM) */ - ROM_LOAD( "b06__14.1g", 0x0000, 0x0800, CRC(28907072) SHA1(21c7017af8a8ceb8e43d7e798f48518b136fd45c) ) /* Labeled B06-14 and under printed label "Taito M-001, 128P, 720100", is a mask 8042 */ - - ROM_REGION( 0x80000, "gfx1", 0 ) - ROM_LOAD( "b06-01.13a", 0x00000, 0x20000, CRC(d2afbf7e) SHA1(28b4cf94798f049a9f8375464741dbef208d7290) ) - ROM_LOAD( "b06-02.10a", 0x20000, 0x20000, CRC(e0c2757a) SHA1(3c89044caa28b10b4d1bef1515881810c23d312a) ) - ROM_LOAD( "b06-03.7a", 0x40000, 0x20000, CRC(ee80ab9d) SHA1(f4e4833cadff7d856b5a8075a61d902427653e16) ) - ROM_LOAD( "b06-04.4a", 0x60000, 0x20000, CRC(3697ace4) SHA1(6d6e4e64147365bcfcf74a84eb7ae84dffedd304) ) - - ROM_REGION( 0x0400, "proms", 0 ) - ROM_LOAD( "b06-09.15f", 0x00000, 0x200, CRC(f388b361) SHA1(f00db6ad6994cfe9b7ad76e30b7049b11f8c16e4) ) /* hi bytes, AM27S29 or compatible like MB7124 */ - ROM_LOAD( "b06-08.17f", 0x00200, 0x200, CRC(10c9aac3) SHA1(09d6f791dea358e78099af7a370b00b8504ffc97) ) /* lo bytes, AM27S29 or compatible like MB7124 */ - - ROM_REGION( 0x10000, "pal", 0 ) /* these are shared with several other games on this hardware */ - ROM_LOAD( "b06-10.pal16l8a.d9.jed", 0x00000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-11.pal16l8a.d6.jed", 0x01000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-12.pal16l8a.c3.jed", 0x02000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-13.pal16l8a.c2.jed", 0x03000, 0x01000, NO_DUMP) -ROM_END - -ROM_START( extrmatnj ) - ROM_REGION( 0x20000, "maincpu", 0 ) /* Region 0 - main cpu */ - ROM_LOAD( "b06-05.11c", 0x00000, 0x10000, CRC(918e1fe3) SHA1(1aa69e7ae393f275d440b3d5bf817475e443045d) ) - ROM_LOAD( "b06-06.9c", 0x10000, 0x10000, CRC(8842e105) SHA1(68675e77801504c5f67f82fae42f55152ffadebe) ) - - ROM_REGION( 0x10000, "sub", 0 ) /* Region 2 - sound cpu */ - ROM_LOAD( "b06-07.4e", 0x00000, 0x10000, CRC(b37fb8b3) SHA1(10696914b9e39d34d56069a69b9d641339ea2309) ) - - ROM_REGION( 0x10000, "mcu", 0 ) /* M-Chip (i8x42 internal ROM) */ - ROM_LOAD( "b06__14.1g", 0x0000, 0x0800, CRC(28907072) SHA1(21c7017af8a8ceb8e43d7e798f48518b136fd45c) ) /* Labeled B06-14 and under printed label "Taito M-001, 128P, 720100", is a mask 8042 */ - - ROM_REGION( 0x80000, "gfx1", 0 ) - ROM_LOAD( "b06-01.13a", 0x00000, 0x20000, CRC(d2afbf7e) SHA1(28b4cf94798f049a9f8375464741dbef208d7290) ) - ROM_LOAD( "b06-02.10a", 0x20000, 0x20000, CRC(e0c2757a) SHA1(3c89044caa28b10b4d1bef1515881810c23d312a) ) - ROM_LOAD( "b06-03.7a", 0x40000, 0x20000, CRC(ee80ab9d) SHA1(f4e4833cadff7d856b5a8075a61d902427653e16) ) - ROM_LOAD( "b06-04.4a", 0x60000, 0x20000, CRC(3697ace4) SHA1(6d6e4e64147365bcfcf74a84eb7ae84dffedd304) ) - - ROM_REGION( 0x0400, "proms", 0 ) - ROM_LOAD( "b06-09.15f", 0x00000, 0x200, CRC(f388b361) SHA1(f00db6ad6994cfe9b7ad76e30b7049b11f8c16e4) ) /* hi bytes, AM27S29 or compatible like MB7124 */ - ROM_LOAD( "b06-08.17f", 0x00200, 0x200, CRC(10c9aac3) SHA1(09d6f791dea358e78099af7a370b00b8504ffc97) ) /* lo bytes, AM27S29 or compatible like MB7124 */ - - ROM_REGION( 0x10000, "pal", 0 ) /* these are shared with several other games on this hardware */ - ROM_LOAD( "b06-10.pal16l8a.d9.jed", 0x00000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-11.pal16l8a.d6.jed", 0x01000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-12.pal16l8a.c3.jed", 0x02000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-13.pal16l8a.c2.jed", 0x03000, 0x01000, NO_DUMP) -ROM_END - -/* -PCB: -Seta: P0-022-A -Taito: K1100245A J1100108A - -The arknoid2 PCB has a sticker label which says "K1100245A // REVENGE OF DOH" -*/ - -ROM_START( arknoid2 ) - ROM_REGION( 0x20000, "maincpu", 0 ) /* Region 0 - main cpu */ - ROM_LOAD( "b08__05.11c", 0x00000, 0x10000, CRC(136edf9d) SHA1(f632321650897eee585511a84f451a205d1f7704) ) - /* 0x10000 - 0x1ffff empty */ - - ROM_REGION( 0x10000, "sub", 0 ) /* Region 2 - sound cpu */ - ROM_LOAD( "b08__13.3e", 0x00000, 0x10000, CRC(e8035ef1) SHA1(9a54e952cff0036c4b6affd9ffb1097cdccbe255) ) - - ROM_REGION( 0x10000, "mcu", 0 ) /* M-Chip (i8x42 internal ROM) */ - ROM_LOAD( "b08__09.3g", 0x0000, 0x0800, NO_DUMP ) /* Labeled B08 // 09 and under printed label "?Taito M-009?", is a mask 8042 */ - - ROM_REGION( 0x80000, "gfx1", 0 ) - ROM_LOAD( "b08-01.13a", 0x00000, 0x20000, CRC(2ccc86b4) SHA1(eced1d7e687db0331507726946b6a19a690a7604) ) - ROM_LOAD( "b08-02.10a", 0x20000, 0x20000, CRC(056a985f) SHA1(6333b71c631d3307929aae633760870451830e10) ) - ROM_LOAD( "b08-03.7a", 0x40000, 0x20000, CRC(274a795f) SHA1(49353590e1a418843f57c715185e407a20021936) ) - ROM_LOAD( "b08-04.4a", 0x60000, 0x20000, CRC(9754f703) SHA1(0018ebf7da3f501345f3f5085d98d7614f8ce1b6) ) - - ROM_REGION( 0x0400, "proms", 0 ) - ROM_LOAD( "b08-08.15f", 0x00000, 0x200, CRC(a4f7ebd9) SHA1(094eb63c18898c6ee8d722492bdfd28091c61773) ) /* hi bytes, AM27S29 or compatible like MB7124 */ - ROM_LOAD( "b08-07.16f", 0x00200, 0x200, CRC(ea34d9f7) SHA1(9a46edc64f961bd96908419cabd92445d300fc19) ) /* lo bytes, AM27S29 or compatible like MB7124 */ - - ROM_REGION( 0x10000, "pal", 0 ) /* these are shared with extermination */ - ROM_LOAD( "b06-10.pal16l8a.d9.jed", 0x00000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-11.pal16l8a.d6.jed", 0x01000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-12.pal16l8a.c3.jed", 0x02000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-13.pal16l8a.c2.jed", 0x03000, 0x01000, NO_DUMP) -ROM_END - -ROM_START( arknoid2u ) - ROM_REGION( 0x20000, "maincpu", 0 ) /* Region 0 - main cpu */ - ROM_LOAD( "b08__11.11c", 0x00000, 0x10000, CRC(99555231) SHA1(2798f3f5b3f1fa27598fe7a6e95c75d9142c8d34) ) - /* 0x10000 - 0x1ffff empty */ - - ROM_REGION( 0x10000, "sub", 0 ) /* Region 2 - sound cpu */ - ROM_LOAD( "b08__12.3e", 0x00000, 0x10000, CRC(dc84e27d) SHA1(d549d8c9fbec0521517f0c5f5cee763e27d48633) ) - - ROM_REGION( 0x10000, "mcu", 0 ) /* M-Chip (i8x42 internal ROM) */ - ROM_LOAD( "b08__09.3g", 0x0000, 0x0800, NO_DUMP ) /* Labeled B08 // 09 and under printed label "?Taito M-009?", is a mask 8042 */ - - ROM_REGION( 0x80000, "gfx1", 0 ) - ROM_LOAD( "b08-01.13a", 0x00000, 0x20000, CRC(2ccc86b4) SHA1(eced1d7e687db0331507726946b6a19a690a7604) ) - ROM_LOAD( "b08-02.10a", 0x20000, 0x20000, CRC(056a985f) SHA1(6333b71c631d3307929aae633760870451830e10) ) - ROM_LOAD( "b08-03.7a", 0x40000, 0x20000, CRC(274a795f) SHA1(49353590e1a418843f57c715185e407a20021936) ) - ROM_LOAD( "b08-04.4a", 0x60000, 0x20000, CRC(9754f703) SHA1(0018ebf7da3f501345f3f5085d98d7614f8ce1b6) ) - - ROM_REGION( 0x0400, "proms", 0 ) - ROM_LOAD( "b08-08.15f", 0x00000, 0x200, CRC(a4f7ebd9) SHA1(094eb63c18898c6ee8d722492bdfd28091c61773) ) /* hi bytes, AM27S29 or compatible like MB7124 */ - ROM_LOAD( "b08-07.16f", 0x00200, 0x200, CRC(ea34d9f7) SHA1(9a46edc64f961bd96908419cabd92445d300fc19) ) /* lo bytes, AM27S29 or compatible like MB7124 */ - - ROM_REGION( 0x10000, "pal", 0 ) /* these are shared with extermination */ - ROM_LOAD( "b06-10.pal16l8a.d9.jed", 0x00000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-11.pal16l8a.d6.jed", 0x01000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-12.pal16l8a.c3.jed", 0x02000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-13.pal16l8a.c2.jed", 0x03000, 0x01000, NO_DUMP) -ROM_END - -ROM_START( arknoid2j ) - ROM_REGION( 0x20000, "maincpu", 0 ) /* Region 0 - main cpu */ - ROM_LOAD( "b08_05.11c", 0x00000, 0x10000, CRC(136edf9d) SHA1(f632321650897eee585511a84f451a205d1f7704) ) - /* 0x10000 - 0x1ffff empty */ - - ROM_REGION( 0x10000, "sub", 0 ) /* Region 2 - sound cpu */ - ROM_LOAD( "b08_06.3e", 0x00000, 0x10000, CRC(adfcd40c) SHA1(f91299407ed21e2dd244c9b1a315b27ed32f5514) ) - - ROM_REGION( 0x10000, "mcu", 0 ) /* M-Chip (i8x42 internal ROM) */ - ROM_LOAD( "b08__09.3g", 0x0000, 0x0800, NO_DUMP ) /* Labeled B08 // 09 and under printed label "?Taito M-009?", is a mask 8042 */ - - ROM_REGION( 0x80000, "gfx1", 0 ) - ROM_LOAD( "b08-01.13a", 0x00000, 0x20000, CRC(2ccc86b4) SHA1(eced1d7e687db0331507726946b6a19a690a7604) ) - ROM_LOAD( "b08-02.10a", 0x20000, 0x20000, CRC(056a985f) SHA1(6333b71c631d3307929aae633760870451830e10) ) - ROM_LOAD( "b08-03.7a", 0x40000, 0x20000, CRC(274a795f) SHA1(49353590e1a418843f57c715185e407a20021936) ) - ROM_LOAD( "b08-04.4a", 0x60000, 0x20000, CRC(9754f703) SHA1(0018ebf7da3f501345f3f5085d98d7614f8ce1b6) ) - - ROM_REGION( 0x0400, "proms", 0 ) - ROM_LOAD( "b08-08.15f", 0x00000, 0x200, CRC(a4f7ebd9) SHA1(094eb63c18898c6ee8d722492bdfd28091c61773) ) /* hi bytes, AM27S29 or compatible like MB7124 */ - ROM_LOAD( "b08-07.16f", 0x00200, 0x200, CRC(ea34d9f7) SHA1(9a46edc64f961bd96908419cabd92445d300fc19) ) /* lo bytes, AM27S29 or compatible like MB7124 */ - - ROM_REGION( 0x10000, "pal", 0 ) /* these are shared with extermination */ - ROM_LOAD( "b06-10.pal16l8a.d9.jed", 0x00000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-11.pal16l8a.d6.jed", 0x01000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-12.pal16l8a.c3.jed", 0x02000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-13.pal16l8a.c2.jed", 0x03000, 0x01000, NO_DUMP) -ROM_END - -ROM_START( arknoid2b ) - ROM_REGION( 0x20000, "maincpu", 0 ) /* Region 0 - main cpu */ - ROM_LOAD( "boot.11c", 0x00000, 0x10000, CRC(3847dfb0) SHA1(993c8af3df7a4d5a2523f0e31a6df1c07ba13c7d) ) - /* 0x10000 - 0x1ffff empty */ - - ROM_REGION( 0x10000, "sub", 0 ) /* Region 2 - sound cpu */ - ROM_LOAD( "b08_13.3e", 0x00000, 0x10000, CRC(e8035ef1) SHA1(9a54e952cff0036c4b6affd9ffb1097cdccbe255) ) - - ROM_REGION( 0x10000, "mcu", 0 ) /* M-Chip (i8x42 internal ROM) */ - ROM_LOAD( "ark28742.3g", 0x0000, 0x0800, NO_DUMP ) /* Labeled B08 // 09 and under printed label "?Taito M-009?", is a mask 8042... does the bootleg set even HAVE the mcu? */ - - ROM_REGION( 0x80000, "gfx1", 0 ) - ROM_LOAD( "b08-01.13a", 0x00000, 0x20000, CRC(2ccc86b4) SHA1(eced1d7e687db0331507726946b6a19a690a7604) ) - ROM_LOAD( "b08-02.10a", 0x20000, 0x20000, CRC(056a985f) SHA1(6333b71c631d3307929aae633760870451830e10) ) - ROM_LOAD( "b08-03.7a", 0x40000, 0x20000, CRC(274a795f) SHA1(49353590e1a418843f57c715185e407a20021936) ) - ROM_LOAD( "b08-04.4a", 0x60000, 0x20000, CRC(9754f703) SHA1(0018ebf7da3f501345f3f5085d98d7614f8ce1b6) ) - - ROM_REGION( 0x0400, "proms", 0 ) - ROM_LOAD( "b08-08.15f", 0x00000, 0x200, CRC(a4f7ebd9) SHA1(094eb63c18898c6ee8d722492bdfd28091c61773) ) /* hi bytes, AM27S29 or compatible like MB7124 */ - ROM_LOAD( "b08-07.16f", 0x00200, 0x200, CRC(ea34d9f7) SHA1(9a46edc64f961bd96908419cabd92445d300fc19) ) /* lo bytes, AM27S29 or compatible like MB7124 */ - - ROM_REGION( 0x10000, "pal", 0 ) /* these are shared with extermination */ - ROM_LOAD( "b06-10.pal16l8a.d9.jed", 0x00000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-11.pal16l8a.d6.jed", 0x01000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-12.pal16l8a.c3.jed", 0x02000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-13.pal16l8a.c2.jed", 0x03000, 0x01000, NO_DUMP) -ROM_END - -/* -PCB: -Seta: P0-025-A -Taito: K1100241A J1100107A - -The drtoppelj PCB has a sticker label which says "K1100269A // DR. トッペル タンケン" (To'PeRu TaNKeN) -*/ -ROM_START( drtoppel ) - ROM_REGION( 0x20000, "maincpu", 0 ) /* 64k + bankswitch areas for the first CPU */ - ROM_LOAD( "b19__09.11c", 0x00000, 0x10000, CRC(3e654f82) SHA1(d9e351d82546b08eb7887ea1d976fa97a259db6e) ) - ROM_LOAD( "b19__10.9c", 0x10000, 0x10000, CRC(7e72fd25) SHA1(6035e4db75e6dc57b13bb6e92217d1c2d0ffdfd2) ) - - ROM_REGION( 0x10000, "sub", 0 ) /* 64k for the second CPU */ - ROM_LOAD( "b19__15.3e", 0x00000, 0x10000, BAD_DUMP CRC(37a0d3fb) SHA1(f65fb9382af5f5b09725c39b660c5138b3912f53) ) /* Region-Hacked??, need correct Taito ROM number */ - - ROM_REGION( 0x10000, "mcu", 0 ) /* M-Chip (i8x42 internal ROM) */ - ROM_LOAD( "b06__14.1g", 0x0000, 0x0800, CRC(28907072) SHA1(21c7017af8a8ceb8e43d7e798f48518b136fd45c) ) /* Labeled B06 // 14 and under printed label "Taito M-001, 128P, 720100", is a mask 8042 */ - - ROM_REGION( 0x100000, "gfx1", 0 ) - ROM_LOAD( "b19-01.23c1000.13a", 0x00000, 0x20000, CRC(a7e8a0c1) SHA1(a2f017ae5b6472d4202f126d0247b3fe4b1321d1) ) - ROM_LOAD( "b19-02.23c1000.12a", 0x20000, 0x20000, CRC(790ae654) SHA1(5fd6b89918e1539e00c918959b96d2a9394c8abe) ) - ROM_LOAD( "b19-03.23c1000.10a", 0x40000, 0x20000, CRC(495c4c5a) SHA1(a23b512cda4c0c535df5508a52faebe401c1797d) ) - ROM_LOAD( "b19-04.23c1000.8a", 0x60000, 0x20000, CRC(647007a0) SHA1(10ec35a15091967038bb26fb116c47d730f69edc) ) - ROM_LOAD( "b19-05.23c1000.7a", 0x80000, 0x20000, CRC(49f2b1a5) SHA1(5e98bb421afaa02471ad02213ea6ca23ff2f0e27) ) - ROM_LOAD( "b19-06.23c1000.5a", 0xa0000, 0x20000, CRC(2d39f1d0) SHA1(2aa89a5cc7f026c8db9922b183319ff66ac4a071) ) - ROM_LOAD( "b19-07.23c1000.4a", 0xc0000, 0x20000, CRC(8bb06f41) SHA1(a0c182d473317f2cdb31bdf39a2593c032002305) ) - ROM_LOAD( "b19-08.23c1000.2a", 0xe0000, 0x20000, CRC(3584b491) SHA1(d0aca90708be241bbd3a1097220a85083337a4bc) ) - - ROM_REGION( 0x0400, "proms", 0 ) /* color PROMs */ - ROM_LOAD( "b19-13.am27s29.15f", 0x0000, 0x200, CRC(6a547980) SHA1(c82f8dfad028565b4b4e5be1167f2f290c929090) ) /* hi bytes, AM27S29 or compatible like MB7124 */ - ROM_LOAD( "b19-12.am27s29.16f", 0x0200, 0x200, CRC(5754e9d8) SHA1(8c7d29e22c90b1f72929b95675dc15e431aae044) ) /* lo bytes, AM27S29 or compatible like MB7124 */ - - ROM_REGION( 0x10000, "pal", 0 ) /* these are shared with extermination */ - ROM_LOAD( "b06-10.pal16l8a.d9.jed", 0x00000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-11.pal16l8a.d6.jed", 0x01000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-12.pal16l8a.c3.jed", 0x02000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-13.pal16l8a.c2.jed", 0x03000, 0x01000, NO_DUMP) -ROM_END - -ROM_START( drtoppelu ) - ROM_REGION( 0x20000, "maincpu", 0 ) /* 64k + bankswitch areas for the first CPU */ - ROM_LOAD( "b19__09.11c", 0x00000, 0x10000, CRC(3e654f82) SHA1(d9e351d82546b08eb7887ea1d976fa97a259db6e) ) - ROM_LOAD( "b19__10.9c", 0x10000, 0x10000, CRC(7e72fd25) SHA1(6035e4db75e6dc57b13bb6e92217d1c2d0ffdfd2) ) - - ROM_REGION( 0x10000, "sub", 0 ) /* 64k for the second CPU */ - ROM_LOAD( "b19__14.3e", 0x00000, 0x10000, BAD_DUMP CRC(05565b22) SHA1(d1aa47b438d3b44c5177337809e38b50f6445c36) ) /* Region-Hacked??, need correct Taito ROM number */ - - ROM_REGION( 0x10000, "mcu", 0 ) /* M-Chip (i8x42 internal ROM) */ - ROM_LOAD( "b06__14.1g", 0x0000, 0x0800, CRC(28907072) SHA1(21c7017af8a8ceb8e43d7e798f48518b136fd45c) ) /* Labeled B06 // 14 and under printed label "Taito M-001, 128P, 720100", is a mask 8042 */ - - ROM_REGION( 0x100000, "gfx1", 0 ) - ROM_LOAD( "b19-01.23c1000.13a", 0x00000, 0x20000, CRC(a7e8a0c1) SHA1(a2f017ae5b6472d4202f126d0247b3fe4b1321d1) ) - ROM_LOAD( "b19-02.23c1000.12a", 0x20000, 0x20000, CRC(790ae654) SHA1(5fd6b89918e1539e00c918959b96d2a9394c8abe) ) - ROM_LOAD( "b19-03.23c1000.10a", 0x40000, 0x20000, CRC(495c4c5a) SHA1(a23b512cda4c0c535df5508a52faebe401c1797d) ) - ROM_LOAD( "b19-04.23c1000.8a", 0x60000, 0x20000, CRC(647007a0) SHA1(10ec35a15091967038bb26fb116c47d730f69edc) ) - ROM_LOAD( "b19-05.23c1000.7a", 0x80000, 0x20000, CRC(49f2b1a5) SHA1(5e98bb421afaa02471ad02213ea6ca23ff2f0e27) ) - ROM_LOAD( "b19-06.23c1000.5a", 0xa0000, 0x20000, CRC(2d39f1d0) SHA1(2aa89a5cc7f026c8db9922b183319ff66ac4a071) ) - ROM_LOAD( "b19-07.23c1000.4a", 0xc0000, 0x20000, CRC(8bb06f41) SHA1(a0c182d473317f2cdb31bdf39a2593c032002305) ) - ROM_LOAD( "b19-08.23c1000.2a", 0xe0000, 0x20000, CRC(3584b491) SHA1(d0aca90708be241bbd3a1097220a85083337a4bc) ) - - ROM_REGION( 0x0400, "proms", 0 ) /* color PROMs */ - ROM_LOAD( "b19-13.am27s29.15f", 0x0000, 0x200, CRC(6a547980) SHA1(c82f8dfad028565b4b4e5be1167f2f290c929090) ) /* hi bytes, AM27S29 or compatible like MB7124 */ - ROM_LOAD( "b19-12.am27s29.16f", 0x0200, 0x200, CRC(5754e9d8) SHA1(8c7d29e22c90b1f72929b95675dc15e431aae044) ) /* lo bytes, AM27S29 or compatible like MB7124 */ - - ROM_REGION( 0x10000, "pal", 0 ) /* these are shared with extermination */ - ROM_LOAD( "b06-10.pal16l8a.d9.jed", 0x00000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-11.pal16l8a.d6.jed", 0x01000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-12.pal16l8a.c3.jed", 0x02000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-13.pal16l8a.c2.jed", 0x03000, 0x01000, NO_DUMP) -ROM_END - -ROM_START( drtoppelj ) - ROM_REGION( 0x20000, "maincpu", 0 ) /* 64k + bankswitch areas for the first CPU */ - ROM_LOAD( "b19__09.11c", 0x00000, 0x10000, CRC(3e654f82) SHA1(d9e351d82546b08eb7887ea1d976fa97a259db6e) ) - ROM_LOAD( "b19__10.9c", 0x10000, 0x10000, CRC(7e72fd25) SHA1(6035e4db75e6dc57b13bb6e92217d1c2d0ffdfd2) ) - - ROM_REGION( 0x10000, "sub", 0 ) /* 64k for the second CPU */ - ROM_LOAD( "b19__11.3e", 0x00000, 0x10000, CRC(524dc249) SHA1(158b2de0fcd17ad16ba72bb24888122bf704e216) ) - - ROM_REGION( 0x10000, "mcu", 0 ) /* M-Chip (i8x42 internal ROM) */ - ROM_LOAD( "b06__14.1g", 0x0000, 0x0800, CRC(28907072) SHA1(21c7017af8a8ceb8e43d7e798f48518b136fd45c) ) /* Labeled B06 // 14 and under printed label "Taito M-001, 128P, 720100", is a mask 8042 */ - - ROM_REGION( 0x100000, "gfx1", 0 ) - ROM_LOAD( "b19-01.23c1000.13a", 0x00000, 0x20000, CRC(a7e8a0c1) SHA1(a2f017ae5b6472d4202f126d0247b3fe4b1321d1) ) - ROM_LOAD( "b19-02.23c1000.12a", 0x20000, 0x20000, CRC(790ae654) SHA1(5fd6b89918e1539e00c918959b96d2a9394c8abe) ) - ROM_LOAD( "b19-03.23c1000.10a", 0x40000, 0x20000, CRC(495c4c5a) SHA1(a23b512cda4c0c535df5508a52faebe401c1797d) ) - ROM_LOAD( "b19-04.23c1000.8a", 0x60000, 0x20000, CRC(647007a0) SHA1(10ec35a15091967038bb26fb116c47d730f69edc) ) - ROM_LOAD( "b19-05.23c1000.7a", 0x80000, 0x20000, CRC(49f2b1a5) SHA1(5e98bb421afaa02471ad02213ea6ca23ff2f0e27) ) - ROM_LOAD( "b19-06.23c1000.5a", 0xa0000, 0x20000, CRC(2d39f1d0) SHA1(2aa89a5cc7f026c8db9922b183319ff66ac4a071) ) - ROM_LOAD( "b19-07.23c1000.4a", 0xc0000, 0x20000, CRC(8bb06f41) SHA1(a0c182d473317f2cdb31bdf39a2593c032002305) ) - ROM_LOAD( "b19-08.23c1000.2a", 0xe0000, 0x20000, CRC(3584b491) SHA1(d0aca90708be241bbd3a1097220a85083337a4bc) ) - - ROM_REGION( 0x0400, "proms", 0 ) /* color PROMs */ - ROM_LOAD( "b19-13.am27s29.15f", 0x0000, 0x200, CRC(6a547980) SHA1(c82f8dfad028565b4b4e5be1167f2f290c929090) ) /* hi bytes, AM27S29 or compatible like MB7124 */ - ROM_LOAD( "b19-12.am27s29.16f", 0x0200, 0x200, CRC(5754e9d8) SHA1(8c7d29e22c90b1f72929b95675dc15e431aae044) ) /* lo bytes, AM27S29 or compatible like MB7124 */ - - ROM_REGION( 0x10000, "pal", 0 ) /* these are shared with extermination */ - ROM_LOAD( "b06-10.pal16l8a.d9.jed", 0x00000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-11.pal16l8a.d6.jed", 0x01000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-12.pal16l8a.c3.jed", 0x02000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-13.pal16l8a.c2.jed", 0x03000, 0x01000, NO_DUMP) -ROM_END - -ROM_START( kageki ) - ROM_REGION( 0x20000, "maincpu", 0 ) - ROM_LOAD( "b35-13.bin", 0x00000, 0x10000, CRC(dc4b025f) SHA1(ed7e0d846693abe0a0ac198e23b272f84b30af46) ) /* World ver */ - ROM_LOAD( "b35-10.9c", 0x10000, 0x10000, CRC(b150457d) SHA1(a58e46e7dfdc93c2cc7c04d623d7754f85ba693b) ) - - ROM_REGION( 0x10000, "sub", 0 ) - ROM_LOAD( "b35-14.bin", 0x00000, 0x10000, CRC(8adef2d0) SHA1(0dc8206b35e898b8fed5cdccbdcc5ff1bad68da4) ) /* World ver */ - - ROM_REGION( 0x100000, "gfx1", 0 ) - ROM_LOAD( "b35__01.13a", 0x00000, 0x20000, CRC(01d83a69) SHA1(92a84329306b58a45f7bb443a8642eeaeb04d553) ) - ROM_LOAD( "b35__02.12a", 0x20000, 0x20000, CRC(d8af47ac) SHA1(2ef9ca991bf55ed6c12bf3a7dc4aa904d7749d5c) ) - ROM_LOAD( "b35__03.10a", 0x40000, 0x20000, CRC(3cb68797) SHA1(e7669b1a9a26dede560cc87695004d29510bc1f5) ) - ROM_LOAD( "b35__04.8a", 0x60000, 0x20000, CRC(71c03f91) SHA1(edce6e5a52b0c83c1c3c6bf9bc6b7957f7941521) ) - ROM_LOAD( "b35__05.7a", 0x80000, 0x20000, CRC(a4e20c08) SHA1(5d1d23d1410fea8650b18c595b0170a17e5d89a6) ) - ROM_LOAD( "b35__06.5a", 0xa0000, 0x20000, CRC(3f8ab658) SHA1(44de7ee2bdb89bc520ed9bc812c26789c3f31411) ) - ROM_LOAD( "b35__07.4a", 0xc0000, 0x20000, CRC(1b4af049) SHA1(09783816d5076219d241538e2711402eb8c4cd03) ) - ROM_LOAD( "b35__08.2a", 0xe0000, 0x20000, CRC(deb2268c) SHA1(318bf3da6cbe20758397d5f78caf3cda02f322d7) ) - - ROM_REGION( 0x10000, "samples", 0 ) /* samples */ - ROM_LOAD( "b35-15.98g", 0x00000, 0x10000, CRC(e6212a0f) SHA1(43891f4fd141b00ed458be47a107a2550a0534c2) ) - - ROM_REGION( 0x10000, "pal", 0 ) /* these are shared with extermination except d9 */ - ROM_LOAD( "b06-101.pal16l8a.d9.jed", 0x00000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-11.pal16l8a.d6.jed", 0x01000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-12.pal16l8a.c3.jed", 0x02000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-13.pal16l8a.c2.jed", 0x03000, 0x01000, NO_DUMP) -ROM_END - -/* M6100309A PCB - P0-038A */ -ROM_START( kagekiu ) - ROM_REGION( 0x20000, "maincpu", 0 ) - ROM_LOAD( "b35-16.11c", 0x00000, 0x10000, CRC(a4e6fd58) SHA1(7cfe5b3fa6c88cdab45719f5b58541270825ad30) ) /* US ver */ - ROM_LOAD( "b35-10.9c", 0x10000, 0x10000, CRC(b150457d) SHA1(a58e46e7dfdc93c2cc7c04d623d7754f85ba693b) ) - - ROM_REGION( 0x10000, "sub", 0 ) - ROM_LOAD( "b35-17.43e", 0x00000, 0x10000, CRC(fdd9c246) SHA1(ac7a59ed19d0d81748cabd8b77a6ba3937e3cc99) ) /* US ver */ - - ROM_REGION( 0x100000, "gfx1", 0 ) - ROM_LOAD( "b35__01.13a", 0x00000, 0x20000, CRC(01d83a69) SHA1(92a84329306b58a45f7bb443a8642eeaeb04d553) ) - ROM_LOAD( "b35__02.12a", 0x20000, 0x20000, CRC(d8af47ac) SHA1(2ef9ca991bf55ed6c12bf3a7dc4aa904d7749d5c) ) - ROM_LOAD( "b35__03.10a", 0x40000, 0x20000, CRC(3cb68797) SHA1(e7669b1a9a26dede560cc87695004d29510bc1f5) ) - ROM_LOAD( "b35__04.8a", 0x60000, 0x20000, CRC(71c03f91) SHA1(edce6e5a52b0c83c1c3c6bf9bc6b7957f7941521) ) - ROM_LOAD( "b35__05.7a", 0x80000, 0x20000, CRC(a4e20c08) SHA1(5d1d23d1410fea8650b18c595b0170a17e5d89a6) ) - ROM_LOAD( "b35__06.5a", 0xa0000, 0x20000, CRC(3f8ab658) SHA1(44de7ee2bdb89bc520ed9bc812c26789c3f31411) ) - ROM_LOAD( "b35__07.4a", 0xc0000, 0x20000, CRC(1b4af049) SHA1(09783816d5076219d241538e2711402eb8c4cd03) ) - ROM_LOAD( "b35__08.2a", 0xe0000, 0x20000, CRC(deb2268c) SHA1(318bf3da6cbe20758397d5f78caf3cda02f322d7) ) - - ROM_REGION( 0x10000, "samples", 0 ) /* samples */ - ROM_LOAD( "b35-15.98g", 0x00000, 0x10000, CRC(e6212a0f) SHA1(43891f4fd141b00ed458be47a107a2550a0534c2) ) /* matches World ver */ - - ROM_REGION( 0x10000, "pal", 0 ) /* these are shared with extermination except d9 */ - ROM_LOAD( "b06-101.pal16l8a.d9.jed", 0x00000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-11.pal16l8a.d6.jed", 0x01000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-12.pal16l8a.c3.jed", 0x02000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-13.pal16l8a.c2.jed", 0x03000, 0x01000, NO_DUMP) -ROM_END - -ROM_START( kagekij ) - ROM_REGION( 0x20000, "maincpu", 0 ) - ROM_LOAD( "b35-09.11c", 0x00000, 0x10000, CRC(829637d5) SHA1(0239ae925968336a90cbe16e23519773b6f2f2ac) ) /* JP ver */ - ROM_LOAD( "b35-10.9c", 0x10000, 0x10000, CRC(b150457d) SHA1(a58e46e7dfdc93c2cc7c04d623d7754f85ba693b) ) - - ROM_REGION( 0x10000, "sub", 0 ) - ROM_LOAD( "b35-11.43e", 0x00000, 0x10000, CRC(64d093fc) SHA1(3ca3f69d8946c453c0edb8586b92e2948a2d0b6c) ) /* JP ver */ - - ROM_REGION( 0x100000, "gfx1", 0 ) - ROM_LOAD( "b35-01.13a", 0x00000, 0x20000, CRC(01d83a69) SHA1(92a84329306b58a45f7bb443a8642eeaeb04d553) ) - ROM_LOAD( "b35-02.12a", 0x20000, 0x20000, CRC(d8af47ac) SHA1(2ef9ca991bf55ed6c12bf3a7dc4aa904d7749d5c) ) - ROM_LOAD( "b35-03.10a", 0x40000, 0x20000, CRC(3cb68797) SHA1(e7669b1a9a26dede560cc87695004d29510bc1f5) ) - ROM_LOAD( "b35-04.8a", 0x60000, 0x20000, CRC(71c03f91) SHA1(edce6e5a52b0c83c1c3c6bf9bc6b7957f7941521) ) - ROM_LOAD( "b35-05.7a", 0x80000, 0x20000, CRC(a4e20c08) SHA1(5d1d23d1410fea8650b18c595b0170a17e5d89a6) ) - ROM_LOAD( "b35-06.5a", 0xa0000, 0x20000, CRC(3f8ab658) SHA1(44de7ee2bdb89bc520ed9bc812c26789c3f31411) ) - ROM_LOAD( "b35-07.4a", 0xc0000, 0x20000, CRC(1b4af049) SHA1(09783816d5076219d241538e2711402eb8c4cd03) ) - ROM_LOAD( "b35-08.2a", 0xe0000, 0x20000, CRC(deb2268c) SHA1(318bf3da6cbe20758397d5f78caf3cda02f322d7) ) - - ROM_REGION( 0x10000, "samples", 0 ) /* samples */ - ROM_LOAD( "b35-12.98g", 0x00000, 0x10000, CRC(184409f1) SHA1(711bdd499670e86630ebb6820262b1d8d651c987) ) /* JP ver */ - - ROM_REGION( 0x10000, "pal", 0 ) /* these are shared with extermination except d9 */ - ROM_LOAD( "b06-101.pal16l8a.d9.jed", 0x00000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-11.pal16l8a.d6.jed", 0x01000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-12.pal16l8a.c3.jed", 0x02000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-13.pal16l8a.c2.jed", 0x03000, 0x01000, NO_DUMP) -ROM_END - -/* Board ID is M6100309A - program ROM has been hacked to say 1992 :/ - supported because it appears to be a different code revision to the other supported sets -*/ - -ROM_START( kagekih ) - ROM_REGION( 0x20000, "maincpu", 0 ) - ROM_LOAD( "b35_16.11c", 0x00000, 0x10000, CRC(1cf67603) SHA1(0627285ac69e44312d7694c64b96a81489d8663c) ) /* hacked ver of the World set */ - ROM_LOAD( "b35-10.9c", 0x10000, 0x10000, CRC(b150457d) SHA1(a58e46e7dfdc93c2cc7c04d623d7754f85ba693b) ) - - ROM_REGION( 0x10000, "sub", 0 ) - ROM_LOAD( "b35-11.43e", 0x00000, 0x10000, CRC(64d093fc) SHA1(3ca3f69d8946c453c0edb8586b92e2948a2d0b6c) ) /* JP ver */ - - ROM_REGION( 0x100000, "gfx1", 0 ) - ROM_LOAD( "b35-01.13a", 0x00000, 0x20000, CRC(01d83a69) SHA1(92a84329306b58a45f7bb443a8642eeaeb04d553) ) - ROM_LOAD( "b35-02.12a", 0x20000, 0x20000, CRC(d8af47ac) SHA1(2ef9ca991bf55ed6c12bf3a7dc4aa904d7749d5c) ) - ROM_LOAD( "b35-03.10a", 0x40000, 0x20000, CRC(3cb68797) SHA1(e7669b1a9a26dede560cc87695004d29510bc1f5) ) - ROM_LOAD( "b35-04.8a", 0x60000, 0x20000, CRC(71c03f91) SHA1(edce6e5a52b0c83c1c3c6bf9bc6b7957f7941521) ) - ROM_LOAD( "b35-05.7a", 0x80000, 0x20000, CRC(a4e20c08) SHA1(5d1d23d1410fea8650b18c595b0170a17e5d89a6) ) - ROM_LOAD( "b35-06.5a", 0xa0000, 0x20000, CRC(3f8ab658) SHA1(44de7ee2bdb89bc520ed9bc812c26789c3f31411) ) - ROM_LOAD( "b35-07.4a", 0xc0000, 0x20000, CRC(1b4af049) SHA1(09783816d5076219d241538e2711402eb8c4cd03) ) - ROM_LOAD( "b35-08.2a", 0xe0000, 0x20000, CRC(deb2268c) SHA1(318bf3da6cbe20758397d5f78caf3cda02f322d7) ) - - ROM_REGION( 0x10000, "samples", 0 ) /* samples */ - ROM_LOAD( "b35-12.98g", 0x00000, 0x10000, CRC(184409f1) SHA1(711bdd499670e86630ebb6820262b1d8d651c987) ) /* JP ver */ - - ROM_REGION( 0x10000, "pal", 0 ) /* these are shared with extermination except d9 */ - ROM_LOAD( "b06-101.pal16l8a.d9.jed", 0x00000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-11.pal16l8a.d6.jed", 0x01000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-12.pal16l8a.c3.jed", 0x02000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-13.pal16l8a.c2.jed", 0x03000, 0x01000, NO_DUMP) -ROM_END - - -/* -Chuka Taisen -Taito, 1988 - - Seta: P0-028-A -Taito: K1100416A J1100332A -|--------------------------------------------------| -| SETA SETA 12MHz | -| X1-003 6116 X1-001 | -| 6116 YM3906 | -| SETA 6116 | -| X1-006 6116 | -| | -| SETA | -| X1-002A | -| | -| DSWB | -|J B44-01.8 | -|A PRG10.32 | -|M DSWA PRG11.31 B44-05.7 | -|M 6264 | -|A B44-02.6 | -| YM3014 | -| B44-06.5 | -| B06-101.36(PAL) | -| B44-03.4 | -| YM2203 Z80B | -| B06-11.35(PAL) B44-07.3 | -| B44_12.38 | -| SETA B44-04.2 | -| X1-004 Z80B | -| B06-12.26(PAL) B44-08.1 | -| B06-11.25(PAL) | -|--------------------------------------------------| -Notes: - 6264: 8K x8 SRAM - 6116: 2K x8 SRAM - Graphics ROMs are 23C1000/TC531000 mask ROMs - - -Chuka Taisen 'later' version: - Seta: PO-025-A - Taito: K1100241A J1100107A -Sticker: K1100364A CHUKA TAISEN - -Technically newer ROM ID#s but was used to get rid of old pcb stock. -This set, unlike the PO-028-A PCB versions, uses two color PROMs. - - -************************************************ -Guru-Readme for EPROM version of Chuuka Taisen ------------------------------------------------- - -Main Board (same as Extermination/Dr Toppel etc) ----------- -PO-025-A -J1100107A K1100241A -Sticker: K1100364A CHUUKA TAISEN -Sticker: M4300092A CHUUKA TAISEN - -All EPROMs are NEC D27C512D-15 -M-Chip labelled "B06 14" at location 3G - -PALs (all MMI PAL16L8A-2CN): B06-13.2C, B06-12.3C, B06-11.6D, B06-10.8D -PALs are protected - -PROMs are AM27S29 - - -ROM Board ---------- -K9100189A J9100141A ROM7PCB -Sticker: K9100189A CHUUKA TAISEN - -All EPROMs are Toshiba TC571000D-20 - -************************************************ - -*/ - -ROM_START( chukatai ) - ROM_REGION( 0x20000, "maincpu", 0 ) /* 64k + bankswitch areas for the first CPU */ - ROM_LOAD( "b44-10", 0x00000, 0x10000, CRC(8c69e008) SHA1(7825965f517f3562a508345b7c0d32b8a57bd38a) ) /* P0-028-A PCB set */ - ROM_LOAD( "b44-11", 0x10000, 0x10000, CRC(32484094) SHA1(f320fea2910816b5085ca9aa37e30af665fb6be1) ) - - ROM_REGION( 0x10000, "sub", 0 ) /* 64k for the second CPU */ - ROM_LOAD( "b44-12w", 0x00000, 0x10000, CRC(e80ecdca) SHA1(cd96403ca97f18f630118dcb3dc2179c01147213) ) /* Hacked??, need correct Taito ROM number */ - - ROM_REGION( 0x10000, "mcu", 0 ) /* M-Chip (i8x42 internal ROM) */ - ROM_LOAD( "b44-8742.mcu", 0x0000, 0x0800, CRC(7dff3f9f) SHA1(bbf4e036d025fe8179b053d639f9b8ad401e6e68) ) /* B44 // 09 is the label? what is the mask number under the label? maybe Taito M-011? last digit is definitely 1 */ - - ROM_REGION( 0x100000, "gfx1", 0 ) - ROM_LOAD( "b44-01.a13", 0x00000, 0x20000, CRC(aae7b3d5) SHA1(52809ea22d98811ece2fb27e80db6ddf4fbacb07) ) - ROM_LOAD( "b44-02.a12", 0x20000, 0x20000, CRC(7f0b9568) SHA1(415d2638d1b0eb36b2e2f63219cbc0dbebe02dc6) ) - ROM_LOAD( "b44-03.a10", 0x40000, 0x20000, CRC(5a54a3b9) SHA1(6b219f1c3570f16eb4a06221d7e527c735437bac) ) - ROM_LOAD( "b44-04.a08", 0x60000, 0x20000, CRC(3c5f544b) SHA1(d3b0ee18f1027483a36ef02757b62f42a086a8e2) ) - ROM_LOAD( "b44-05.a07", 0x80000, 0x20000, CRC(d1b7e314) SHA1(8b4181caa32955b4274614a4238bb24d67ecb729) ) - ROM_LOAD( "b44-06.a05", 0xa0000, 0x20000, CRC(269978a8) SHA1(aef7b8d3d00dcc4201e0a1e28026f6f1bdafd0b7) ) - ROM_LOAD( "b44-07.a04", 0xc0000, 0x20000, CRC(3e0e737e) SHA1(f8d62c7b69c79da9df7ef5ce454060d3645e5884) ) - ROM_LOAD( "b44-08.a02", 0xe0000, 0x20000, CRC(6cb1e8fc) SHA1(4ab0c2cce1de2616044a9bfb9bf17f95a49baffd) ) - - ROM_REGION( 0x10000, "pal", 0 ) /* these are shared with extermination except d9 */ - ROM_LOAD( "b06-101.pal16l8a.d9.jed", 0x00000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-11.pal16l8a.d6.jed", 0x01000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-12.pal16l8a.c3.jed", 0x02000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-13.pal16l8a.c2.jed", 0x03000, 0x01000, NO_DUMP) -ROM_END - -ROM_START( chukataiu ) - ROM_REGION( 0x20000, "maincpu", 0 ) /* 64k + bankswitch areas for the first CPU */ - ROM_LOAD( "b44-10", 0x00000, 0x10000, CRC(8c69e008) SHA1(7825965f517f3562a508345b7c0d32b8a57bd38a) ) /* P0-028-A PCB set */ - ROM_LOAD( "b44-11", 0x10000, 0x10000, CRC(32484094) SHA1(f320fea2910816b5085ca9aa37e30af665fb6be1) ) - - ROM_REGION( 0x10000, "sub", 0 ) /* 64k for the second CPU */ - ROM_LOAD( "b44-12u", 0x00000, 0x10000, BAD_DUMP CRC(9f09fd5c) SHA1(ae92f2e893e1e666dcabbd793f1a778c5e3d7bab) ) /* Hacked??, need correct Taito ROM number */ - - ROM_REGION( 0x1000, "mcu", 0 ) /* M-Chip (i8x42 internal ROM) */ - ROM_LOAD( "b44-8742.mcu", 0x0000, 0x0800, CRC(7dff3f9f) SHA1(bbf4e036d025fe8179b053d639f9b8ad401e6e68) ) /* B44 // 09 is the label? what is the mask number under the label? maybe Taito M-011? last digit is definitely 1 */ - - ROM_REGION( 0x100000, "gfx1", 0 ) - ROM_LOAD( "b44-01.a13", 0x00000, 0x20000, CRC(aae7b3d5) SHA1(52809ea22d98811ece2fb27e80db6ddf4fbacb07) ) - ROM_LOAD( "b44-02.a12", 0x20000, 0x20000, CRC(7f0b9568) SHA1(415d2638d1b0eb36b2e2f63219cbc0dbebe02dc6) ) - ROM_LOAD( "b44-03.a10", 0x40000, 0x20000, CRC(5a54a3b9) SHA1(6b219f1c3570f16eb4a06221d7e527c735437bac) ) - ROM_LOAD( "b44-04.a08", 0x60000, 0x20000, CRC(3c5f544b) SHA1(d3b0ee18f1027483a36ef02757b62f42a086a8e2) ) - ROM_LOAD( "b44-05.a07", 0x80000, 0x20000, CRC(d1b7e314) SHA1(8b4181caa32955b4274614a4238bb24d67ecb729) ) - ROM_LOAD( "b44-06.a05", 0xa0000, 0x20000, CRC(269978a8) SHA1(aef7b8d3d00dcc4201e0a1e28026f6f1bdafd0b7) ) - ROM_LOAD( "b44-07.a04", 0xc0000, 0x20000, CRC(3e0e737e) SHA1(f8d62c7b69c79da9df7ef5ce454060d3645e5884) ) - ROM_LOAD( "b44-08.a02", 0xe0000, 0x20000, CRC(6cb1e8fc) SHA1(4ab0c2cce1de2616044a9bfb9bf17f95a49baffd) ) - - ROM_REGION( 0x10000, "pal", 0 ) /* these are shared with extermination except d9 */ - ROM_LOAD( "b06-101.pal16l8a.d9.jed", 0x00000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-11.pal16l8a.d6.jed", 0x01000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-12.pal16l8a.c3.jed", 0x02000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-13.pal16l8a.c2.jed", 0x03000, 0x01000, NO_DUMP) -ROM_END - -ROM_START( chukataij ) - ROM_REGION( 0x20000, "maincpu", 0 ) /* 64k + bankswitch areas for the first CPU */ - ROM_LOAD( "b44-10", 0x00000, 0x10000, CRC(8c69e008) SHA1(7825965f517f3562a508345b7c0d32b8a57bd38a) ) /* P0-028-A PCB set */ - ROM_LOAD( "b44-11", 0x10000, 0x10000, CRC(32484094) SHA1(f320fea2910816b5085ca9aa37e30af665fb6be1) ) - - ROM_REGION( 0x10000, "sub", 0 ) /* 64k for the second CPU */ - ROM_LOAD( "b44-12", 0x00000, 0x10000, CRC(0600ace6) SHA1(3d5767b91ea63128bfbff3527ddcf90fcf43af2e) ) - - ROM_REGION( 0x10000, "mcu", 0 ) /* M-Chip (i8x42 internal ROM) */ - ROM_LOAD( "b44-8742.mcu", 0x0000, 0x0800, CRC(7dff3f9f) SHA1(bbf4e036d025fe8179b053d639f9b8ad401e6e68) ) /* B44 // 09 is the label? what is the mask number under the label? maybe Taito M-011? last digit is definitely 1 */ - - ROM_REGION( 0x100000, "gfx1", 0 ) - ROM_LOAD( "b44-01.a13", 0x00000, 0x20000, CRC(aae7b3d5) SHA1(52809ea22d98811ece2fb27e80db6ddf4fbacb07) ) - ROM_LOAD( "b44-02.a12", 0x20000, 0x20000, CRC(7f0b9568) SHA1(415d2638d1b0eb36b2e2f63219cbc0dbebe02dc6) ) - ROM_LOAD( "b44-03.a10", 0x40000, 0x20000, CRC(5a54a3b9) SHA1(6b219f1c3570f16eb4a06221d7e527c735437bac) ) - ROM_LOAD( "b44-04.a08", 0x60000, 0x20000, CRC(3c5f544b) SHA1(d3b0ee18f1027483a36ef02757b62f42a086a8e2) ) - ROM_LOAD( "b44-05.a07", 0x80000, 0x20000, CRC(d1b7e314) SHA1(8b4181caa32955b4274614a4238bb24d67ecb729) ) - ROM_LOAD( "b44-06.a05", 0xa0000, 0x20000, CRC(269978a8) SHA1(aef7b8d3d00dcc4201e0a1e28026f6f1bdafd0b7) ) - ROM_LOAD( "b44-07.a04", 0xc0000, 0x20000, CRC(3e0e737e) SHA1(f8d62c7b69c79da9df7ef5ce454060d3645e5884) ) - ROM_LOAD( "b44-08.a02", 0xe0000, 0x20000, CRC(6cb1e8fc) SHA1(4ab0c2cce1de2616044a9bfb9bf17f95a49baffd) ) - - ROM_REGION( 0x10000, "pal", 0 ) /* these are shared with extermination except d9 */ - ROM_LOAD( "b06-101.pal16l8a.d9.jed", 0x00000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-11.pal16l8a.d6.jed", 0x01000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-12.pal16l8a.c3.jed", 0x02000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-13.pal16l8a.c2.jed", 0x03000, 0x01000, NO_DUMP) -ROM_END - -ROM_START( chukataija ) - ROM_REGION( 0x20000, "maincpu", 0 ) /* 64k + bankswitch areas for the first CPU */ - ROM_LOAD( "b44-31.11c", 0x00000, 0x10000, CRC(134d3c9e) SHA1(e686a75b9c267db9e8dad7f162c93f1992e395ec) ) /* P0-025-A PCB set */ - ROM_LOAD( "b44-11.9c", 0x10000, 0x10000, CRC(32484094) SHA1(f320fea2910816b5085ca9aa37e30af665fb6be1) ) - - ROM_REGION( 0x10000, "sub", 0 ) /* 64k for the second CPU */ - ROM_LOAD( "b44-32.4e", 0x00000, 0x10000, CRC(f52d2f90) SHA1(f040b16e29553ae510e50e1ed55344a36fdcc56d) ) - - ROM_REGION( 0x10000, "mcu", 0 ) /* M-Chip (i8x42 internal ROM) */ - ROM_LOAD( "b06__14.1g", 0x0000, 0x0800, CRC(28907072) SHA1(21c7017af8a8ceb8e43d7e798f48518b136fd45c) ) /* Labeled B06-14 and under printed label "Taito M-001, 128P, 720100", is a mask 8042 */ - - ROM_REGION( 0x100000, "gfx1", 0 ) /* located on the K9100189A J9100141A ROM7PCB daughterboard */ - ROM_LOAD( "b44-21.rom4l", 0x00000, 0x20000, CRC(aae7b3d5) SHA1(52809ea22d98811ece2fb27e80db6ddf4fbacb07) ) /* same data as B44-01 through B44-08 */ - ROM_LOAD( "b44-22.rom4h", 0x20000, 0x20000, CRC(7f0b9568) SHA1(415d2638d1b0eb36b2e2f63219cbc0dbebe02dc6) ) - ROM_LOAD( "b44-23.rom3l", 0x40000, 0x20000, CRC(5a54a3b9) SHA1(6b219f1c3570f16eb4a06221d7e527c735437bac) ) - ROM_LOAD( "b44-24.rom3h", 0x60000, 0x20000, CRC(3c5f544b) SHA1(d3b0ee18f1027483a36ef02757b62f42a086a8e2) ) - ROM_LOAD( "b44-25.rom2l", 0x80000, 0x20000, CRC(d1b7e314) SHA1(8b4181caa32955b4274614a4238bb24d67ecb729) ) - ROM_LOAD( "b44-26.rom2h", 0xa0000, 0x20000, CRC(269978a8) SHA1(aef7b8d3d00dcc4201e0a1e28026f6f1bdafd0b7) ) - ROM_LOAD( "b44-27.rom1l", 0xc0000, 0x20000, CRC(3e0e737e) SHA1(f8d62c7b69c79da9df7ef5ce454060d3645e5884) ) - ROM_LOAD( "b44-28.rom1h", 0xe0000, 0x20000, CRC(6cb1e8fc) SHA1(4ab0c2cce1de2616044a9bfb9bf17f95a49baffd) ) - - ROM_REGION( 0x0400, "proms", 0 ) - ROM_LOAD( "b44-30.15f", 0x00000, 0x200, CRC(b3de8312) SHA1(dac0d9bfb593d691fd7030e2b1b13be1218929a4) ) /* hi bytes, AM27S29 or compatible like MB7124 */ - ROM_LOAD( "b44-29.17f", 0x00200, 0x200, CRC(ae44b8fb) SHA1(2bf5aca32bb301c0187deb05a3f4a482ac97f0ef) ) /* lo bytes, AM27S29 or compatible like MB7124 */ - - ROM_REGION( 0x10000, "pal", 0 ) /* these are shared with extermination */ - ROM_LOAD( "b06-10.pal16l8a.d9.jed", 0x00000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-11.pal16l8a.d6.jed", 0x01000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-12.pal16l8a.c3.jed", 0x02000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-13.pal16l8a.c2.jed", 0x03000, 0x01000, NO_DUMP) -ROM_END - - -/* -The New Zealand Story -Taito, 1988 - -PCB Layout ("New style PCB" with 3x z80 and no M-chip, and a daughterboard with ROMs and z80) ----------- -The tnzs PCB has a sticker label which says "M6100409A // N.Z.LAND STORY" - -M6100356A (on PCB) -P0-043A (Seta number; on PCB) -|---------------------------------------------------| -| VOL HA17408 B53-26.U34 DSWB DSWA | -| 4558 YM2203 Z80 62256 Z80| -| 4558 YM3014 | -| | -| B06-13 | -| (PAL) | -| | -| | -| 6264 B53-25.U3| -|J TESTSW | -|A | -|M | -|M B06-101 | -|A (PAL) | -|---------------------------------------------------| <- ROM Board above -| DIP40| main PCB -| X1-001A | -| | -| X1-004 | -| X1-002A 12MHz | -| | -| | -| X1-006 6264 | -|X1-007 DIP40 DIP40 DIP40 DIP40 B53-24.U1| -|---------------------------------------------------| -Notes: - All Z80 CPU's running at 6.000MHz (12/2) - YM2203 running at 3.000MHz (12/4) - VSync 60Hz - DIP40 - Empty sockets used for connection of ROM board - Seta Custom IC's - - X1-001A - X1-002A - X1-004 - X1-006 - X1-007 - - -ROM Board ---------- -K9100209A -J9100159A SUB PCB -K9100209A N. Z. LAND STORY (sticker) -|---------------------------------------------------| -| PAL(B53-15) | -| B53_20 B53_18 B53_16 Z80B DIP40| -|B53_21 B53_19 B53_17 | -| | -| | -| | -|B53_23 | -| B53_22 | -| DIP40 DIP40 DIP40 DIP40 62256 | -|---------------------------------------------------| -Notes: - Z80 clock 6.000MHz - DIP40 - connection pins joining to Main PCB DIP40 sockets - All ROMs are 27010 (DIP32) -*/ - -/* tnzs - new style PCB sets */ -ROM_START( tnzs ) - ROM_REGION( 0x20000, "maincpu", 0 ) /* 64k + bankswitch areas for the first CPU */ - ROM_LOAD( "b53-24.u1", 0x00000, 0x20000, CRC(d66824c6) SHA1(fd381ac0dc52ce670c3fde320ea60a209e288a52) ) - - ROM_REGION( 0x10000, "sub", 0 ) /* 64k for the second CPU */ - ROM_LOAD( "b53-25.u3", 0x00000, 0x10000, CRC(d6ac4e71) SHA1(f3e71624a8a5e4e4c8a6aa01711ed26bdd5abf5a) ) - - ROM_REGION( 0x10000, "audiocpu", 0 ) /* 64k for the third CPU */ - ROM_LOAD( "b53-26.u34", 0x00000, 0x10000, CRC(cfd5649c) SHA1(4f6afccd535d39b41661dc3ccd17af125bfac015) ) - - ROM_REGION( 0x100000, "gfx1", 0 ) /* the newer PCBs have updated GFX ROM labels, content is the same. Located on a SUB PCB */ - ROM_LOAD( "b53-16.ic7", 0x00000, 0x20000, CRC(c3519c2a) SHA1(30fe7946fbc95ab6b3ccb6944fb24bf47bf3d743) ) /* Also labeled as U35L */ - ROM_LOAD( "b53-17.ic8", 0x20000, 0x20000, CRC(2bf199e8) SHA1(4ed73e4f00ae2f5f4028a0ea5ae3cd238863a370) ) /* Also labeled as U35U */ - ROM_LOAD( "b53-18.ic9", 0x40000, 0x20000, CRC(92f35ed9) SHA1(5fdd8d6ddbb7be9887af3c8dea9ad3b58c4e86f9) ) /* Also labeled as U39L */ - ROM_LOAD( "b53-19.ic10", 0x60000, 0x20000, CRC(edbb9581) SHA1(539396a01ca0b69455f000d446759b232530b542) ) /* Also labeled as U39U */ - ROM_LOAD( "b53-22.ic11", 0x80000, 0x20000, CRC(59d2aef6) SHA1(b657b7603c3eb5f169000d38497ebb93f26f7832) ) /* Also labeled as U43L */ - ROM_LOAD( "b53-23.ic13", 0xa0000, 0x20000, CRC(74acfb9b) SHA1(90b544ed7ede7565660bdd13c94c15c54423cda9) ) /* Also labeled as U43U */ - ROM_LOAD( "b53-20.ic12", 0xc0000, 0x20000, CRC(095d0dc0) SHA1(ced2937d0594fa00ae344a4e3a3cba23772dc160) ) /* Also labeled as U46L */ - ROM_LOAD( "b53-21.ic14", 0xe0000, 0x20000, CRC(9800c54d) SHA1(761647177d621ac2cdd8b009876eed35809f3c92) ) /* Also labeled as U46U */ - - ROM_REGION( 0x10000, "pal", 0 ) - /* these are shared with extermination except for the subpcb pal */ - ROM_LOAD( "b06-13.pal16l8a.f2.jed", 0x01000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-101.pal16l8a.i2.jed", 0x02000, 0x01000, NO_DUMP) - ROM_LOAD( "b53-15.pal16l8a.subpcb.ic6.jed", 0x03000, 0x01000, NO_DUMP) // on sub pcb -ROM_END - -ROM_START( tnzsj ) - ROM_REGION( 0x20000, "maincpu", 0 ) /* 64k + bankswitch areas for the first CPU */ - ROM_LOAD( "b53-24.u1", 0x00000, 0x20000, CRC(d66824c6) SHA1(fd381ac0dc52ce670c3fde320ea60a209e288a52) ) - - ROM_REGION( 0x10000, "sub", 0 ) /* 64k for the second CPU */ - ROM_LOAD( "b53-27.u3", 0x00000, 0x10000, CRC(b3415fc3) SHA1(a12b1788509e2ac2b05a083f432eecdce00769f6) ) - - ROM_REGION( 0x10000, "audiocpu", 0 ) /* 64k for the third CPU */ - ROM_LOAD( "b53-26.u34", 0x00000, 0x10000, CRC(cfd5649c) SHA1(4f6afccd535d39b41661dc3ccd17af125bfac015) ) - - ROM_REGION( 0x100000, "gfx1", 0 ) /* the newer PCBs have updated GFX ROM labels, content is the same. Located on a SUB PCB */ - ROM_LOAD( "b53-16.ic7", 0x00000, 0x20000, CRC(c3519c2a) SHA1(30fe7946fbc95ab6b3ccb6944fb24bf47bf3d743) ) /* Also labeled as U35L */ - ROM_LOAD( "b53-17.ic8", 0x20000, 0x20000, CRC(2bf199e8) SHA1(4ed73e4f00ae2f5f4028a0ea5ae3cd238863a370) ) /* Also labeled as U35U */ - ROM_LOAD( "b53-18.ic9", 0x40000, 0x20000, CRC(92f35ed9) SHA1(5fdd8d6ddbb7be9887af3c8dea9ad3b58c4e86f9) ) /* Also labeled as U39L */ - ROM_LOAD( "b53-19.ic10", 0x60000, 0x20000, CRC(edbb9581) SHA1(539396a01ca0b69455f000d446759b232530b542) ) /* Also labeled as U39U */ - ROM_LOAD( "b53-22.ic11", 0x80000, 0x20000, CRC(59d2aef6) SHA1(b657b7603c3eb5f169000d38497ebb93f26f7832) ) /* Also labeled as U43L */ - ROM_LOAD( "b53-23.ic13", 0xa0000, 0x20000, CRC(74acfb9b) SHA1(90b544ed7ede7565660bdd13c94c15c54423cda9) ) /* Also labeled as U43U */ - ROM_LOAD( "b53-20.ic12", 0xc0000, 0x20000, CRC(095d0dc0) SHA1(ced2937d0594fa00ae344a4e3a3cba23772dc160) ) /* Also labeled as U46L */ - ROM_LOAD( "b53-21.ic14", 0xe0000, 0x20000, CRC(9800c54d) SHA1(761647177d621ac2cdd8b009876eed35809f3c92) ) /* Also labeled as U46U */ - - ROM_REGION( 0x10000, "pal", 0 ) - /* these are shared with extermination except for the subpcb pal */ - ROM_LOAD( "b06-13.pal16l8a.f2.jed", 0x01000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-101.pal16l8a.i2.jed", 0x02000, 0x01000, NO_DUMP) - ROM_LOAD( "b53-15.pal16l8a.subpcb.ic6.jed", 0x03000, 0x01000, NO_DUMP) // on sub pcb -ROM_END - -/* tnzs - old style PCB sets -The New Zealand Story -Taito, 1988 - -Taito ID: K1100356A - J1100156A - MAIN PCB -Seta ID: P0-041A -*/ -/* This pcb is derived from the Chuka Taisen,DrToppel and Arkanoid 2 pcbs, replacing the two color PROMs with color RAM; - There is an M-chip i8x42 (with Taito silkscreen) and no 3rd z80. - There is no daughter-pcb like the later TNZS pcb has. - GFX Roms on the pcb are 28 pin 23C1000/TC531000 128K mask ROMs */ - -ROM_START( tnzso ) - ROM_REGION( 0x20000, "maincpu", 0 ) /* 64k + bankswitch areas for the first CPU */ - ROM_LOAD( "b53-10.27c1001d.u32", 0x00000, 0x20000, CRC(a73745c6) SHA1(73eb38e75e08312d752332f988dc655084b4a86d) ) - - ROM_REGION( 0x10000, "sub", 0 ) /* 64k for the second CPU */ - ROM_LOAD( "b53-14.u38", 0x00000, 0x10000, CRC(f269c5f1) SHA1(15e00e5bc6394f55fc6c591754e24842708f49f4) ) // World version old style PCB - - ROM_REGION( 0x10000, "mcu", 0 ) /* M-Chip (i8x42 internal ROM) */ - ROM_LOAD( "b53-09.u46", 0x0000, 0x0800, CRC(a4bfce19) SHA1(9340862d5bdc1ad4799dc92cae9bce1428b47478) ) - - ROM_REGION( 0x100000, "gfx1", 0 ) - ROM_LOAD( "b53-08.u8", 0x00000, 0x20000, CRC(c3519c2a) SHA1(30fe7946fbc95ab6b3ccb6944fb24bf47bf3d743) ) - ROM_LOAD( "b53-07.u7", 0x20000, 0x20000, CRC(2bf199e8) SHA1(4ed73e4f00ae2f5f4028a0ea5ae3cd238863a370) ) - ROM_LOAD( "b53-06.u6", 0x40000, 0x20000, CRC(92f35ed9) SHA1(5fdd8d6ddbb7be9887af3c8dea9ad3b58c4e86f9) ) - ROM_LOAD( "b53-05.u5", 0x60000, 0x20000, CRC(edbb9581) SHA1(539396a01ca0b69455f000d446759b232530b542) ) - ROM_LOAD( "b53-04.u4", 0x80000, 0x20000, CRC(59d2aef6) SHA1(b657b7603c3eb5f169000d38497ebb93f26f7832) ) - ROM_LOAD( "b53-03.u3", 0xa0000, 0x20000, CRC(74acfb9b) SHA1(90b544ed7ede7565660bdd13c94c15c54423cda9) ) - ROM_LOAD( "b53-02.u2", 0xc0000, 0x20000, CRC(095d0dc0) SHA1(ced2937d0594fa00ae344a4e3a3cba23772dc160) ) - ROM_LOAD( "b53-01.u1", 0xe0000, 0x20000, CRC(9800c54d) SHA1(761647177d621ac2cdd8b009876eed35809f3c92) ) - - ROM_REGION( 0x10000, "pal", 0 ) /* these are probably shared with extermination except for u35 */ - ROM_LOAD( "b06-12.pal16l8a.u26.jed", 0x00000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-13.pal16l8a.u25.jed", 0x01000, 0x01000, NO_DUMP) - ROM_LOAD( "b53-12.pal16l8a.u35.jed", 0x02000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-101.pal16l8a.u36.jed", 0x03000, 0x01000, NO_DUMP) -ROM_END - -ROM_START( tnzsjo ) - ROM_REGION( 0x20000, "maincpu", 0 ) /* 64k + bankswitch areas for the first CPU */ - ROM_LOAD( "b53-10.27c1001d.u32", 0x00000, 0x20000, CRC(a73745c6) SHA1(73eb38e75e08312d752332f988dc655084b4a86d) ) - - ROM_REGION( 0x10000, "sub", 0 ) /* 64k for the second CPU */ - ROM_LOAD( "b53-11.27c512.u38", 0x00000, 0x10000, CRC(9784d443) SHA1(bc3647aac9974031dbe4898417fbaa99841f9548) ) // Japan version old style PCB - - ROM_REGION( 0x10000, "mcu", 0 ) /* M-Chip (i8x42 internal ROM) */ - ROM_LOAD( "b53-09.u46", 0x0000, 0x0800, CRC(a4bfce19) SHA1(9340862d5bdc1ad4799dc92cae9bce1428b47478) ) - - ROM_REGION( 0x100000, "gfx1", 0 ) - /* ROMs taken from another set (the ones from this set were read incorrectly) */ - ROM_LOAD( "b53-08.u8", 0x00000, 0x20000, CRC(c3519c2a) SHA1(30fe7946fbc95ab6b3ccb6944fb24bf47bf3d743) ) - ROM_LOAD( "b53-07.u7", 0x20000, 0x20000, CRC(2bf199e8) SHA1(4ed73e4f00ae2f5f4028a0ea5ae3cd238863a370) ) - ROM_LOAD( "b53-06.u6", 0x40000, 0x20000, CRC(92f35ed9) SHA1(5fdd8d6ddbb7be9887af3c8dea9ad3b58c4e86f9) ) - ROM_LOAD( "b53-05.u5", 0x60000, 0x20000, CRC(edbb9581) SHA1(539396a01ca0b69455f000d446759b232530b542) ) - ROM_LOAD( "b53-04.u4", 0x80000, 0x20000, CRC(59d2aef6) SHA1(b657b7603c3eb5f169000d38497ebb93f26f7832) ) - ROM_LOAD( "b53-03.u3", 0xa0000, 0x20000, CRC(74acfb9b) SHA1(90b544ed7ede7565660bdd13c94c15c54423cda9) ) - ROM_LOAD( "b53-02.u2", 0xc0000, 0x20000, CRC(095d0dc0) SHA1(ced2937d0594fa00ae344a4e3a3cba23772dc160) ) - ROM_LOAD( "b53-01.u1", 0xe0000, 0x20000, CRC(9800c54d) SHA1(761647177d621ac2cdd8b009876eed35809f3c92) ) - - ROM_REGION( 0x10000, "pal", 0 ) /* these are probably shared with extermination except for u35 */ - ROM_LOAD( "b06-12.pal16l8a.u26.jed", 0x00000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-13.pal16l8a.u25.jed", 0x01000, 0x01000, NO_DUMP) - ROM_LOAD( "b53-12.pal16l8a.u35.jed", 0x02000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-101.pal16l8a.u36.jed", 0x03000, 0x01000, NO_DUMP) -ROM_END - -ROM_START( tnzsuo ) - ROM_REGION( 0x20000, "maincpu", 0 ) /* 64k + bankswitch areas for the first CPU */ - ROM_LOAD( "b53-10.27c1001d.u32", 0x00000, 0x20000, CRC(a73745c6) SHA1(73eb38e75e08312d752332f988dc655084b4a86d) ) - - ROM_REGION( 0x10000, "sub", 0 ) /* 64k for the second CPU */ - ROM_LOAD( "b53-13.27c512.u38", 0x00000, 0x10000, CRC(c09f4d28) SHA1(f1fd3202869738e17abcbb757f9ce7260707dd3d) ) // US version old style PCB - - ROM_REGION( 0x10000, "mcu", 0 ) /* M-Chip (i8x42 internal ROM) */ - ROM_LOAD( "b53-09.u46", 0x0000, 0x0800, CRC(a4bfce19) SHA1(9340862d5bdc1ad4799dc92cae9bce1428b47478) ) - - ROM_REGION( 0x100000, "gfx1", 0 ) - ROM_LOAD( "b53-08.u8", 0x00000, 0x20000, CRC(c3519c2a) SHA1(30fe7946fbc95ab6b3ccb6944fb24bf47bf3d743) ) - ROM_LOAD( "b53-07.u7", 0x20000, 0x20000, CRC(2bf199e8) SHA1(4ed73e4f00ae2f5f4028a0ea5ae3cd238863a370) ) - ROM_LOAD( "b53-06.u6", 0x40000, 0x20000, CRC(92f35ed9) SHA1(5fdd8d6ddbb7be9887af3c8dea9ad3b58c4e86f9) ) - ROM_LOAD( "b53-05.u5", 0x60000, 0x20000, CRC(edbb9581) SHA1(539396a01ca0b69455f000d446759b232530b542) ) - ROM_LOAD( "b53-04.u4", 0x80000, 0x20000, CRC(59d2aef6) SHA1(b657b7603c3eb5f169000d38497ebb93f26f7832) ) - ROM_LOAD( "b53-03.u3", 0xa0000, 0x20000, CRC(74acfb9b) SHA1(90b544ed7ede7565660bdd13c94c15c54423cda9) ) - ROM_LOAD( "b53-02.u2", 0xc0000, 0x20000, CRC(095d0dc0) SHA1(ced2937d0594fa00ae344a4e3a3cba23772dc160) ) - ROM_LOAD( "b53-01.u1", 0xe0000, 0x20000, CRC(9800c54d) SHA1(761647177d621ac2cdd8b009876eed35809f3c92) ) - - ROM_REGION( 0x10000, "pal", 0 ) /* these are probably shared with extermination except for u35 */ - ROM_LOAD( "b06-12.pal16l8a.u26.jed", 0x00000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-13.pal16l8a.u25.jed", 0x01000, 0x01000, NO_DUMP) - ROM_LOAD( "b53-12.pal16l8a.u35.jed", 0x02000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-101.pal16l8a.u36.jed", 0x03000, 0x01000, NO_DUMP) -ROM_END - -ROM_START( tnzsoa ) // is this a legit set, or a hack, or a near-final (later than tnzsop below) prototype? - ROM_REGION( 0x20000, "maincpu", 0 ) /* 64k + bankswitch areas for the first CPU */ - ROM_LOAD( "b53-unknown.27c1001d.u32", 0x00000, 0x20000, CRC(edf3b39e) SHA1(be221c99e50795d569611dba454c3954a259a859) ) // ROM LABEL FOR THIS SET IS UNKNOWN - - ROM_REGION( 0x10000, "sub", 0 ) /* 64k for the second CPU */ - ROM_LOAD( "b53-unknown.27c512.u38", 0x00000, 0x10000, CRC(60340d63) SHA1(12a26d19dc8e407e502f25617a5a4c9cea131ce2) ) // ROM LABEL FOR THIS SET IS UNKNOWN - - ROM_REGION( 0x10000, "mcu", 0 ) /* M-Chip (i8x42 internal ROM) */ - ROM_LOAD( "b53-09.u46", 0x0000, 0x0800, CRC(a4bfce19) SHA1(9340862d5bdc1ad4799dc92cae9bce1428b47478) ) - - ROM_REGION( 0x100000, "gfx1", 0 ) - /* ROMs taken from another set (the ones from this set were read incorrectly) */ - ROM_LOAD( "b53-08.u8", 0x00000, 0x20000, CRC(c3519c2a) SHA1(30fe7946fbc95ab6b3ccb6944fb24bf47bf3d743) ) - ROM_LOAD( "b53-07.u7", 0x20000, 0x20000, CRC(2bf199e8) SHA1(4ed73e4f00ae2f5f4028a0ea5ae3cd238863a370) ) - ROM_LOAD( "b53-06.u6", 0x40000, 0x20000, CRC(92f35ed9) SHA1(5fdd8d6ddbb7be9887af3c8dea9ad3b58c4e86f9) ) - ROM_LOAD( "b53-05.u5", 0x60000, 0x20000, CRC(edbb9581) SHA1(539396a01ca0b69455f000d446759b232530b542) ) - ROM_LOAD( "b53-04.u4", 0x80000, 0x20000, CRC(59d2aef6) SHA1(b657b7603c3eb5f169000d38497ebb93f26f7832) ) - ROM_LOAD( "b53-03.u3", 0xa0000, 0x20000, CRC(74acfb9b) SHA1(90b544ed7ede7565660bdd13c94c15c54423cda9) ) - ROM_LOAD( "b53-02.u2", 0xc0000, 0x20000, CRC(095d0dc0) SHA1(ced2937d0594fa00ae344a4e3a3cba23772dc160) ) - ROM_LOAD( "b53-01.u1", 0xe0000, 0x20000, CRC(9800c54d) SHA1(761647177d621ac2cdd8b009876eed35809f3c92) ) - - ROM_REGION( 0x10000, "pal", 0 ) /* PALS not directly observed on this board but assumed to exist */ - /* these are probably shared with extermination except for u35 */ - ROM_LOAD( "b06-12.pal16l8a.u26.jed", 0x00000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-13.pal16l8a.u25.jed", 0x01000, 0x01000, NO_DUMP) - ROM_LOAD( "b53-12.pal16l8a.u35.jed", 0x02000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-101.pal16l8a.u36.jed", 0x03000, 0x01000, NO_DUMP) -ROM_END - -/* This is a prototype CA403001A PCB (Seta: P0-041-1), and is ALMOST but not exactly the same as the K1100356A/J1100156A (Seta: P0-041A) 'tnzsuo/tnzsjo/arkanoid2/etc' pcb above: -This pcb uses 32-pin 27c1000d EPROMs for the 8 gfx ROMs, and the final K1100356A/J1100156A pcb uses 28 pin 23c1000 mask ROMs instead. Some capacitors near the jamma connector were moved as well. -No other obviously evident routing/wiring changes are present. -This type of pcb might have been used for in-house testing of all the games on this hardware. -*/ -ROM_START( tnzsop ) // prototype (location test?) version; has different ROM labels, and the Seta X1-001 chip has prototype markings revealing it was fabbed by Yamaha, as 'YM3906' - ROM_REGION( 0x20000, "maincpu", 0 ) /* 64k + bankswitch areas for the first CPU */ - ROM_LOAD( "c-11__6-24__1959h.d27c1000d-15.u32", 0x00000, 0x20000, CRC(3c1dae7b) SHA1(0004fccc171714c80565326f8690f9662c5b75d9) ) // Labeled as PCB location, date of 6/24 & checksum - NEC D271000d EPROM - - ROM_REGION( 0x10000, "sub", 0 ) /* 64k for the second CPU */ - ROM_LOAD( "e-3__6-24__c4ach.tmm27512d-20.u38", 0x00000, 0x10000, CRC(c7662e96) SHA1(be28298bfde4e3867cfe75633ffb0f8611dbbd8b) ) // Labeled as PCB location, date of 6/24 & checksum - TMM27512D EPROM - - ROM_REGION( 0x10000, "mcu", 0 ) /* M-Chip (i8x42 internal ROM) */ - ROM_LOAD( "b8042h___88-6-22__0fcc.d8742.u46", 0x0000, 0x0800, CRC(a4bfce19) SHA1(9340862d5bdc1ad4799dc92cae9bce1428b47478) ) // Dated '88/6/22 with checksum - Intel D8742 MCU - - ROM_REGION( 0x100000, "gfx1", 0 ) - ROM_LOAD( "a13__03e8.d27c1000d-15.a13", 0x00000, 0x20000, CRC(7e0bd5bb) SHA1(95dfb00ec915778e02d8bfa996735ab817191adc) ) // labels contain the PCB location & checksum - ROM_LOAD( "a12__f4ec.d27c1000d-15.a12", 0x20000, 0x20000, CRC(95880726) SHA1(f4fdedd23e80a6ccf32f737ab4bc57f9fc0925be) ) // PCB CA403001A did NOT have silkscreened U1 - U8 labels - ROM_LOAD( "a10__f2b5.d27c1000d-15.a10", 0x40000, 0x20000, CRC(2bc4c053) SHA1(cd7668a7733e5e80c2c566d0cf63c4310e5743b4) ) // PCB also labeled as P0-041-1 - ROM_LOAD( "a08__bd49.d27c1000d-15.a8", 0x60000, 0x20000, CRC(8ff8d88c) SHA1(31977e39ad048a077e9b5bd712ff66b14a466d27) ) - ROM_LOAD( "a07__d5f3.d27c1000d-15.a7", 0x80000, 0x20000, CRC(291bcaca) SHA1(4f659a0cd2ff6b4ec04ab95ee8a670222c402c2b) ) - ROM_LOAD( "a05__662a.d27c1000d-15.a5", 0xa0000, 0x20000, CRC(6e762e20) SHA1(66731fe4053b9c09bc9c95d10aba212db08b4636) ) - ROM_LOAD( "a04__0c21.d27c1000d-15.a4", 0xc0000, 0x20000, CRC(e1fd1b9d) SHA1(6027491b927c2ab9c77fbf8895da1abcfbe32d62) ) - ROM_LOAD( "a02__904f.d27c1000d-15.a2", 0xe0000, 0x20000, CRC(2ab06bda) SHA1(2b208b564e55c258665e1f66b26fe14a6c68eb96) ) - - ROM_REGION( 0x10000, "pal", 0 ) - /* these are probably shared with extermination except for u35 */ - ROM_LOAD( "b06-12.pal16l8a.u26.jed", 0x00000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-13.pal16l8a.u25.jed", 0x01000, 0x01000, NO_DUMP) - ROM_LOAD( "st-6.pal16l8a.u35.jed", 0x02000, 0x01000, NO_DUMP) - ROM_LOAD( "b06-101.pal16l8a.u36.jed", 0x03000, 0x01000, NO_DUMP) -ROM_END - -/* -Kabuki Z -Taito, 1988 - -This PCB runs on Taito/Seta hardware and the exact same newer PCB as The New Zealand Story. -As such, everything here also applies to The New Zealand Story. -Unlike the newer The New Zealand Story pcb, Kabuki Z lacks the daughterboard with the 3rd z80. - -PCB Layout ----------- - -M6100356A (on PCB) -M6100356A (on sticker) -P0-043A (Seta number; on PCB) -|---------------------------------------------------| -| VOL HA17408 B50-07.U34 DSWB DSWA | -| 4558 YM2203 Z80 62256 Z80| -| 4558 YM3014 | -| | -| B06-13 | -| (PAL) | -| | -| | -| 6264 B50-06.U3| -|J TESTSW | -|A | -|M | -|M | -|A B06-101 | -| (PAL) | -| Z80| -| X1-001A | -| | -| X1-004 | -| X1-002A 12MHz | -| | -| B50-01.U46 B50-03.U39 | -| X1-006 6264 | -|X1-007 B50-02.U43 B50-04.U35 B50-05.U1| -|---------------------------------------------------| -Notes: - All Z80 CPU's running at 6.000MHz (12/2) - YM2203 running at 3.000Mz (12/4) - VSync 60Hz -*/ - -ROM_START( kabukiz ) - ROM_REGION( 0x20000, "maincpu", 0 ) /* 64k + bankswitch areas for the first CPU */ - ROM_LOAD( "b50-05.u1", 0x00000, 0x20000, CRC(9cccb129) SHA1(054faf7657bad7237182e36bcc4388b1748af935) ) - - ROM_REGION( 0x10000, "sub", 0 ) /* 64k for the second CPU */ - ROM_LOAD( "b50-08.1e", 0x00000, 0x10000, CRC(cb92d34c) SHA1(3a666f0e3ff9d3daa599123edee228d94eeae754) ) - - ROM_REGION( 0x20000, "audiocpu", 0 ) /* 64k + bankswitch areas for the third CPU */ - ROM_LOAD( "b50-07.u34", 0x00000, 0x20000, CRC(bf7fc2ed) SHA1(77008d12d9bdbfa100dcd87cd6ca7de3748408c5) ) - - ROM_REGION( 0x200000, "gfx1", 0 ) - ROM_LOAD( "b50-04.u35", 0x000000, 0x80000, CRC(04829aa9) SHA1(a501ec7c802478fc41ec8ef4270b1a6872bcbf34) ) - ROM_LOAD( "b50-03.u39", 0x080000, 0x80000, CRC(31489a4c) SHA1(a4b7e00e2074287b47c7e16add963c1470534376) ) - ROM_LOAD( "b50-02.u43", 0x100000, 0x80000, CRC(90b8a8e7) SHA1(a55e327307606142fbb9d500e757655b35e1f252) ) - ROM_LOAD( "b50-01.u46", 0x180000, 0x80000, CRC(f4277751) SHA1(8f50f843f0eda30d639ba397889236ff0a3edce5) ) -ROM_END - -ROM_START( kabukizj ) - ROM_REGION( 0x20000, "maincpu", 0 ) /* 64k + bankswitch areas for the first CPU */ - ROM_LOAD( "b50-05.u1", 0x00000, 0x20000, CRC(9cccb129) SHA1(054faf7657bad7237182e36bcc4388b1748af935) ) - - ROM_REGION( 0x10000, "sub", 0 ) /* 64k for the second CPU */ - ROM_LOAD( "b50-06.u3", 0x00000, 0x10000, CRC(45650aab) SHA1(00d1fc6044a6ad1e82476ccbe730907b4d780cb9) ) - - ROM_REGION( 0x20000, "audiocpu", 0 ) /* 64k + bankswitch areas for the third CPU */ - ROM_LOAD( "b50-07.u34", 0x00000, 0x20000, CRC(bf7fc2ed) SHA1(77008d12d9bdbfa100dcd87cd6ca7de3748408c5) ) - - ROM_REGION( 0x200000, "gfx1", 0 ) - ROM_LOAD( "b50-04.u35", 0x000000, 0x80000, CRC(04829aa9) SHA1(a501ec7c802478fc41ec8ef4270b1a6872bcbf34) ) - ROM_LOAD( "b50-03.u39", 0x080000, 0x80000, CRC(31489a4c) SHA1(a4b7e00e2074287b47c7e16add963c1470534376) ) - ROM_LOAD( "b50-02.u43", 0x100000, 0x80000, CRC(90b8a8e7) SHA1(a55e327307606142fbb9d500e757655b35e1f252) ) - ROM_LOAD( "b50-01.u46", 0x180000, 0x80000, CRC(f4277751) SHA1(8f50f843f0eda30d639ba397889236ff0a3edce5) ) -ROM_END - -ROM_START( insectx ) - ROM_REGION( 0x20000, "maincpu", 0 ) /* 64k + bankswitch areas for the first CPU */ - ROM_LOAD( "b97__03.u32", 0x00000, 0x20000, CRC(18eef387) SHA1(b22633930d39be1e72fbd5b080972122da3cb3ef) ) - - ROM_REGION( 0x10000, "sub", 0 ) /* 64k for the second CPU */ - ROM_LOAD( "b97__07.u38", 0x00000, 0x10000, CRC(324b28c9) SHA1(db77a4ac60196d0f0f35dbc5c951ec29d6392463) ) /* Label is B97 07* with an asterisk */ - - ROM_REGION( 0x100000, "gfx1", 0 ) /* Mask ROMs */ - ROM_LOAD( "b97__01.u1", 0x00000, 0x80000, CRC(d00294b1) SHA1(f43a4f7d13193ddbbcdef71a5085c1db0fc062d4) ) - ROM_LOAD( "b97__02.u2", 0x80000, 0x80000, CRC(db5a7434) SHA1(71fac872b19a13a7ad25c8ad895c322ec9573fdc) ) -ROM_END - -ROM_START( insectxj ) - ROM_REGION( 0x20000, "maincpu", 0 ) /* 64k + bankswitch areas for the first CPU */ - ROM_LOAD( "b97__03.u32", 0x00000, 0x20000, CRC(18eef387) SHA1(b22633930d39be1e72fbd5b080972122da3cb3ef) ) - - ROM_REGION( 0x10000, "sub", 0 ) /* 64k for the second CPU */ - ROM_LOAD( "b97__04.u38", 0x00000, 0x10000, CRC(dc4549e5) SHA1(9920f7c12e047ee165418d33b3add51ea615df7e) ) /* Label is B97 04* with an asterisk */ - - ROM_REGION( 0x100000, "gfx1", 0 ) /* Mask ROMs */ - ROM_LOAD( "b97__01.u1", 0x00000, 0x80000, CRC(d00294b1) SHA1(f43a4f7d13193ddbbcdef71a5085c1db0fc062d4) ) - ROM_LOAD( "b97__02.u2", 0x80000, 0x80000, CRC(db5a7434) SHA1(71fac872b19a13a7ad25c8ad895c322ec9573fdc) ) -ROM_END - - -// YEAR, NAME, PARENT, MACHINE, INPUT, CLASS, INIT, MONITOR,COMPANY, FULLNAME, FLAGS -GAME( 1987, plumppop, 0, plumppop, plumppop, extrmatn_state, empty_init, ROT0, "Taito Corporation", "Plump Pop (Japan)", MACHINE_SUPPORTS_SAVE ) -GAME( 1992, jpopnics, 0, jpopnics, jpopnics, jpopnics_state, empty_init, ROT0, "Nics", "Jumping Pop (Nics, Korean hack of Plump Pop)", MACHINE_IMPERFECT_GRAPHICS | MACHINE_SUPPORTS_SAVE ) - -GAME( 1987, extrmatn, 0, extrmatn, extrmatn, extrmatn_state, empty_init, ROT270, "Taito Corporation Japan", "Extermination (World)", MACHINE_SUPPORTS_SAVE ) -GAME( 1987, extrmatnu, extrmatn, extrmatn, extrmatn, extrmatn_state, empty_init, ROT270, "Taito (World Games license)", "Extermination (US, World Games)", MACHINE_SUPPORTS_SAVE ) -GAME( 1987, extrmatnur,extrmatn, extrmatn, extrmatn, extrmatn_state, empty_init, ROT270, "Taito America Corporation (Romstar license)", "Extermination (US, Romstar)", MACHINE_SUPPORTS_SAVE ) -GAME( 1987, extrmatnj, extrmatn, extrmatn, extrmatn, extrmatn_state, empty_init, ROT270, "Taito Corporation", "Extermination (Japan)", MACHINE_SUPPORTS_SAVE ) - -GAME( 1987, arknoid2, 0, arknoid2, arknoid2, arknoid2_state, empty_init, ROT270, "Taito Corporation Japan", "Arkanoid - Revenge of DOH (World)", MACHINE_SUPPORTS_SAVE ) -GAME( 1987, arknoid2u, arknoid2, arknoid2, arknid2u, arknoid2_state, empty_init, ROT270, "Taito America Corporation (Romstar license)", "Arkanoid - Revenge of DOH (US)", MACHINE_SUPPORTS_SAVE ) -GAME( 1987, arknoid2j, arknoid2, arknoid2, arknid2u, arknoid2_state, empty_init, ROT270, "Taito Corporation", "Arkanoid - Revenge of DOH (Japan)", MACHINE_SUPPORTS_SAVE ) -GAME( 1987, arknoid2b, arknoid2, arknoid2, arknid2u, arknoid2_state, empty_init, ROT270, "bootleg", "Arkanoid - Revenge of DOH (Japan bootleg)", MACHINE_SUPPORTS_SAVE ) - -GAME( 1987, drtoppel, 0, extrmatn, drtoppel, extrmatn_state, empty_init, ROT90, "Kaneko / Taito Corporation Japan", "Dr. Toppel's Adventure (World)", MACHINE_SUPPORTS_SAVE ) /* Possible region hack */ -GAME( 1987, drtoppelu, drtoppel, extrmatn, drtopplu, extrmatn_state, empty_init, ROT90, "Kaneko / Taito America Corporation", "Dr. Toppel's Adventure (US)", MACHINE_SUPPORTS_SAVE ) /* Possible region hack */ -GAME( 1987, drtoppelj, drtoppel, extrmatn, drtopplu, extrmatn_state, empty_init, ROT90, "Kaneko / Taito Corporation", "Dr. Toppel's Tankentai (Japan)", MACHINE_SUPPORTS_SAVE ) - -GAME( 1988, kageki, 0, kageki, kageki, kageki_state, empty_init, ROT90, "Kaneko / Taito Corporation", "Kageki (World)", MACHINE_SUPPORTS_SAVE ) -GAME( 1988, kagekiu, kageki, kageki, kagekiu, kageki_state, empty_init, ROT90, "Kaneko / Taito America Corporation (Romstar license)", "Kageki (US)", MACHINE_SUPPORTS_SAVE ) -GAME( 1988, kagekij, kageki, kageki, kagekij, kageki_state, empty_init, ROT90, "Kaneko / Taito Corporation", "Kageki (Japan)", MACHINE_SUPPORTS_SAVE ) -GAME( 1992, kagekih, kageki, kageki, kageki, kageki_state, empty_init, ROT90, "hack", "Kageki (hack)", MACHINE_SUPPORTS_SAVE ) // date is hacked at least, might also be a Japan set hacked to show english - -GAME( 1988, chukatai, 0, tnzs, chukatai, tnzs_state, empty_init, ROT0, "Taito Corporation Japan", "Chuka Taisen (World) (P0-028-A PCB)", MACHINE_SUPPORTS_SAVE ) /* Possible region hack */ -GAME( 1988, chukataiu, chukatai, tnzs, chukatau, tnzs_state, empty_init, ROT0, "Taito America Corporation", "Chuka Taisen (US) (P0-028-A PCB)", MACHINE_SUPPORTS_SAVE ) /* Possible region hack */ -GAME( 1988, chukataij, chukatai, tnzs, chukatau, tnzs_state, empty_init, ROT0, "Taito Corporation", "Chuka Taisen (Japan) (P0-028-A PCB)", MACHINE_SUPPORTS_SAVE ) -GAME( 1988, chukataija,chukatai, extrmatn, chukatau, extrmatn_state, empty_init, ROT0, "Taito Corporation", "Chuka Taisen (Japan) (P0-025-A PCB)", MACHINE_SUPPORTS_SAVE ) /* Higher ROM ID# but older PCB stock */ - -GAME( 1988, tnzs, 0, tnzsb, tnzs, tnzsb_state, empty_init, ROT0, "Taito Corporation Japan", "The NewZealand Story (World, new version) (P0-043A PCB)", MACHINE_SUPPORTS_SAVE ) -GAME( 1988, tnzsj, tnzs, tnzsb, tnzsj, tnzsb_state, empty_init, ROT0, "Taito Corporation", "The NewZealand Story (Japan, new version) (P0-043A PCB)", MACHINE_SUPPORTS_SAVE ) -GAME( 1988, tnzso, tnzs, tnzs, tnzsop, tnzs_state, empty_init, ROT0, "Taito Corporation Japan", "The NewZealand Story (World, old version) (P0-041A PCB)", MACHINE_SUPPORTS_SAVE ) -GAME( 1988, tnzsjo, tnzs, tnzs, tnzsjo, tnzs_state, empty_init, ROT0, "Taito Corporation", "The NewZealand Story (Japan, old version) (P0-041A PCB)", MACHINE_SUPPORTS_SAVE ) -GAME( 1988, tnzsuo, tnzs, tnzs, tnzsjo, tnzs_state, empty_init, ROT0, "Taito America Corporation", "The NewZealand Story (US, old version) (P0-041A PCB)", MACHINE_SUPPORTS_SAVE ) -GAME( 1988, tnzsoa, tnzs, tnzs, tnzsop, tnzs_state, empty_init, ROT0, "Taito Corporation Japan", "The NewZealand Story (World, unknown version) (P0-041A PCB)", MACHINE_SUPPORTS_SAVE ) -GAME( 1988, tnzsop, tnzs, tnzs, tnzsop, tnzs_state, empty_init, ROT0, "Taito Corporation Japan", "The NewZealand Story (World, prototype) (P0-041-1 PCB)", MACHINE_SUPPORTS_SAVE ) - -GAME( 1988, kabukiz, 0, kabukiz, kabukiz, kabukiz_state, empty_init, ROT0, "Kaneko / Taito Corporation Japan", "Kabuki-Z (World)", MACHINE_SUPPORTS_SAVE ) -GAME( 1988, kabukizj, kabukiz, kabukiz, kabukizj, kabukiz_state, empty_init, ROT0, "Kaneko / Taito Corporation", "Kabuki-Z (Japan)", MACHINE_SUPPORTS_SAVE ) - -GAME( 1989, insectx, 0, insectx, insectx, insectx_state, empty_init, ROT0, "Taito Corporation Japan", "Insector X (World)", MACHINE_SUPPORTS_SAVE ) -GAME( 1989, insectxj, insectx, insectx, insectxj, insectx_state, empty_init, ROT0, "Taito Corporation", "Insector X (Japan)", MACHINE_SUPPORTS_SAVE ) |