diff options
Diffstat (limited to 'src/mame/drivers/pcxt.cpp')
-rw-r--r-- | src/mame/drivers/pcxt.cpp | 617 |
1 files changed, 0 insertions, 617 deletions
diff --git a/src/mame/drivers/pcxt.cpp b/src/mame/drivers/pcxt.cpp deleted file mode 100644 index 1a02af6f5d9..00000000000 --- a/src/mame/drivers/pcxt.cpp +++ /dev/null @@ -1,617 +0,0 @@ -// license:BSD-3-Clause -// copyright-holders:Angelo Salese, Chris Hardy, David Haywood, Tomasz Slanina -/****************************************************************************************** - -PC-XT (c) 1987 IBM - -(Actually Arcade games running on more or less modified PC-XT HW) - -driver by Angelo Salese & Chris Hardy -original tetriunk.c by David Haywood & Tomasz Slanina - -Notes: -- The Korean Tetris is a blantant rip-off of the Mirrorsoft/Andromeda Software Tetris PC - version; - -TODO: -- 02851: tetriskr: Corrupt game graphics after some time of gameplay, caused by a wrong - reading of the i/o $3c8 bit 1. (seems fixed?) -- tetriskr can store inputs read during the timer irq. If ds is 0x40 when the irq is taken - it will corrupt the BIOS data area which can lead to corrupt graphics -- Add a proper FDC device. -- buzzer sound has issues in both games - -******************************************************************************************** -Filetto HW notes: -The PCB is a un-modified IBM-PC with a CGA adapter & a prototyping card that controls the -interface between the pc and the Jamma connectors.Additionally there's also a UM5100 sound -chip for the sound. -PCB Part Number: S/N 90289764 NOVARXT -PCB Contents: -1x UMC 8923S-UM5100 voice processor (upper board) -1x MMI PAL16L8ACN-940CRK9 (upper board) -1x AMD AMPAL16R8APC-8804DM (upper board) -1x AMD P8088-1 main processor 8.000MHz (lower board) -1x Proton PT8010AF PLCC 28.636MHz (lower board) -1x UMC 8928LP-UM8272A floppy disk controller (lower board) -1x UMC 8935CS-UM82C11 Printer Adapter Interface (lower board) -1x UMC 8936CS-UM8250B Programmable asynchronous communications element (lower board) -1x UMC 8937NS-UM82C8167 Real Time Clock (lower board) -1x Yamaha V6363 CMDC QFP (lower board) -There isn't any keyboard found connected to the pcb. -******************************************************************************************** -Filetto SW notes: -The software of this game can be extracted with a normal Windows program extractor. -The files names are: --command.com (1) --ibmbio.com (1) --ibmdos.com (1) --ansi.sys (1) --config.sys (2) --autoexec.bat (3) --x.exe (4) -(1)This is an old Italian version of MS-DOS (v3.30 18th March 1987). -(2)Contains "device=ansi.sys",it's an hook-up for the graphics used by the BIOS. -(3)It has an Echo off (as you can notice from the game itself) and then the loading of the -main program (x.exe). -(4)The main program,done in plain Basic with several Italian comments in it.The date of -the main program is 9th October 1990. - -******************************************************************************************/ - -#include "emu.h" -#include "bus/isa/cga.h" -#include "cpu/i86/i86.h" -#include "sound/hc55516.h" -#include "machine/bankdev.h" -#include "machine/genpc.h" - -class pcxt_state : public driver_device -{ -public: - pcxt_state(const machine_config &mconfig, device_type type, const char *tag) - : driver_device(mconfig, type, tag), - m_maincpu(*this, "maincpu"), - m_mb(*this, "mb"), - m_bank(*this, "bank"), - m_cvsd(*this, "voice"), - m_samples(*this, "samples"){ } - - void tetriskr(machine_config &config); - void filetto(machine_config &config); - -protected: - virtual void machine_start() override; - virtual void machine_reset() override; - virtual void device_timer(emu_timer &timer, device_timer_id id, int param, void *ptr) override; - -private: - int m_lastvalue; - uint8_t m_disk_data[2]; - uint8_t m_port_b_data; - uint8_t m_status; - uint8_t m_clr_status; - uint8_t m_voice, m_bit; - uint32_t m_vaddr; - emu_timer *m_sample; - - uint8_t disk_iobank_r(offs_t offset); - void disk_iobank_w(offs_t offset, uint8_t data); - uint8_t fdc765_status_r(); - uint8_t fdc765_data_r(); - void fdc765_data_w(uint8_t data); - void fdc_dor_w(uint8_t data); - uint8_t port_a_r(); - uint8_t port_b_r(); - uint8_t port_c_r(); - void port_b_w(uint8_t data); - void voice_start_w(uint8_t data); - - required_device<cpu_device> m_maincpu; - required_device<pc_noppi_mb_device> m_mb; - optional_device<address_map_bank_device> m_bank; - optional_device<hc55516_device> m_cvsd; - optional_memory_region m_samples; - void bank_map(address_map &map); - void filetto_io(address_map &map); - void filetto_map(address_map &map); - void tetriskr_io(address_map &map); - void tetriskr_map(address_map &map); -}; - - -class isa8_cga_filetto_device : public isa8_cga_device -{ -public: - // construction/destruction - isa8_cga_filetto_device(const machine_config &mconfig, const char *tag, device_t *owner, uint32_t clock); - - virtual const tiny_rom_entry *device_rom_region() const override; -}; - -DEFINE_DEVICE_TYPE(ISA8_CGA_FILETTO, isa8_cga_filetto_device, "filetto_cga", "ISA8_CGA_FILETTO") - -//------------------------------------------------- -// isa8_cga_filetto_device - constructor -//------------------------------------------------- - -isa8_cga_filetto_device::isa8_cga_filetto_device(const machine_config &mconfig, const char *tag, device_t *owner, uint32_t clock) : - isa8_cga_device(mconfig, ISA8_CGA_FILETTO, tag, owner, clock) -{ -} - -ROM_START( filetto_cga ) - ROM_REGION( 0x2000, "gfx1", 0 ) - ROM_LOAD("u67.bin", 0x0000, 0x2000, CRC(09710122) SHA1(de84bdd9245df287bbd3bb808f0c3531d13a3545) ) -ROM_END - -const tiny_rom_entry *isa8_cga_filetto_device::device_rom_region() const -{ - return ROM_NAME( filetto_cga ); -} - - - -class isa8_cga_tetriskr_device : public isa8_cga_superimpose_device -{ -public: - // construction/destruction - isa8_cga_tetriskr_device(const machine_config &mconfig, const char *tag, device_t *owner, uint32_t clock); - - virtual uint32_t screen_update(screen_device &screen, bitmap_rgb32 &bitmap, const rectangle &cliprect) override; - virtual void device_start() override; - virtual const tiny_rom_entry *device_rom_region() const override; - - uint8_t bg_bank_r(); - void bg_bank_w(uint8_t data); -private: - required_region_ptr<uint8_t> m_bg; - uint8_t m_bg_bank; -}; - - -/* for superimposing CGA over a different source video (i.e. tetriskr) */ -DEFINE_DEVICE_TYPE(ISA8_CGA_TETRISKR, isa8_cga_tetriskr_device, "tetriskr_cga", "ISA8_CGA_TETRISKR") - -//------------------------------------------------- -// isa8_cga_tetriskr_device - constructor -//------------------------------------------------- - -isa8_cga_tetriskr_device::isa8_cga_tetriskr_device(const machine_config &mconfig, const char *tag, device_t *owner, uint32_t clock) : - isa8_cga_superimpose_device(mconfig, ISA8_CGA_TETRISKR, tag, owner, clock), - m_bg(*this, "gfx2") -{ -} - - -void isa8_cga_tetriskr_device::device_start() -{ - m_bg_bank = 0; - isa8_cga_superimpose_device::device_start(); - m_isa->install_device(0x3c0, 0x3c0, read8smo_delegate(*this, FUNC(isa8_cga_tetriskr_device::bg_bank_r)), write8smo_delegate(*this, FUNC(isa8_cga_tetriskr_device::bg_bank_w))); -} - -void isa8_cga_tetriskr_device::bg_bank_w(uint8_t data) -{ - m_bg_bank = (data & 0x0f) ^ 8; -} - -uint8_t isa8_cga_tetriskr_device::bg_bank_r() -{ - return 0xff; -} - - -uint32_t isa8_cga_tetriskr_device::screen_update(screen_device &screen, bitmap_rgb32 &bitmap, const rectangle &cliprect) -{ - //popmessage("%04x",m_start_offs); - - bitmap.fill(rgb_t::black(), cliprect); - - for(int y=cliprect.min_y;y<=cliprect.max_y;y++) - { - int yi = y % 8; - int yj = y / 8; - for(int x=cliprect.min_x;x<=cliprect.max_x;x++) - { - int xi = x % 8; - int xj = x / 8; - uint8_t color = 0; - /* TODO: first byte seems bogus? */ - for(int pen_i = 0;pen_i<4;pen_i++) - color |= ((m_bg[yj*320/8+xj+(pen_i*0x20000)+yi*0x400+m_bg_bank*0x2000+1] >> (7-xi)) & 1) << pen_i; - - bitmap.pix(y, x) = m_palette->pen(color); - } - } - - isa8_cga_device::screen_update(screen, bitmap, cliprect); - return 0; -} - -ROM_START( tetriskr_cga ) - ROM_REGION( 0x2000, "gfx1",ROMREGION_ERASE00 ) /* gfx - 1bpp font*/ - ROM_LOAD( "b-3.u36", 0x1800, 0x0800, CRC(1a636f9a) SHA1(a356cc57914d0c9b9127670b55d1f340e64b1ac9) ) - ROM_IGNORE( 0x1800 ) - - ROM_REGION( 0x80000+1, "gfx2",ROMREGION_INVERT | ROMREGION_ERASEFF ) - ROM_LOAD( "b-1.u59", 0x00000, 0x10000, CRC(4719d986) SHA1(6e0499944b968d96fbbfa3ead6237d69c769d634)) - ROM_LOAD( "b-2.u58", 0x10000, 0x10000, CRC(599e1154) SHA1(14d99f90b4fedeab0ac24ffa9b1fd9ad0f0ba699)) - ROM_LOAD( "b-4.u54", 0x20000, 0x10000, CRC(e112c450) SHA1(dfdecfc6bd617ec520b7563b7caf44b79d498bd3)) - ROM_LOAD( "b-5.u53", 0x30000, 0x10000, CRC(050b7650) SHA1(5981dda4ed43b6e81fbe48bfba90a8775d5ecddf)) - ROM_LOAD( "b-6.u49", 0x40000, 0x10000, CRC(d596ceb0) SHA1(8c82fb638688971ef11159a6b240253e63f0949d)) - ROM_LOAD( "b-7.u48", 0x50000, 0x10000, CRC(79336b6c) SHA1(7a95875f3071bdc3ee25c0e6a5a3c00ef02dc977)) - ROM_LOAD( "b-8.u44", 0x60000, 0x10000, CRC(1f82121a) SHA1(106da0f39f1260d0761217ed0a24c1611bfd7f05)) - ROM_LOAD( "b-9.u43", 0x70000, 0x10000, CRC(4ea22349) SHA1(14dfd3dbd51f8bd6f3290293b8ea1c165e8cf7fd)) -ROM_END - -const tiny_rom_entry *isa8_cga_tetriskr_device::device_rom_region() const -{ - return ROM_NAME( tetriskr_cga ); -} - -uint8_t pcxt_state::disk_iobank_r(offs_t offset) -{ - //printf("Read Prototyping card [%02x] @ PC=%05x\n",offset,m_maincpu->pc()); - //if(offset == 0) return ioport("DSW")->read(); - if(offset == 1) return ioport("IN1")->read(); - - return m_disk_data[offset]; -} - -void pcxt_state::disk_iobank_w(offs_t offset, uint8_t data) -{ -/* - BIOS does a single out $0310,$F0 on reset - - Then does 2 outs to set the bank.. - - X1 X2 - - $F0 $F2 = m0 - $F1 $F2 = m1 - $F0 $F3 = m2 - $F1 $F3 = m3 - - The sequence of - - out $0310,X1 - out $0310,X2 - - sets the selected rom that appears in $C0000-$CFFFF - -*/ - int bank = 0; - -// printf("bank %d set to %02X\n", offset,data); - - if (data == 0xF0) - { - bank = 0; - } - else - { - if((m_lastvalue == 0xF0) && (data == 0xF2)) - bank = 0; - else if ((m_lastvalue == 0xF1) && (data == 0xF2)) - bank = 1; - else if ((m_lastvalue == 0xF0) && (data == 0xF3)) - bank = 2; - else if ((m_lastvalue == 0xF1) && (data == 0xF3)) - bank = 3; - } - - if (!(data & 0xf0)) - { - int bit = (data >> 1) - 2; - m_voice &= ~(1 << bit); - m_voice |= BIT(data, 0) << bit; - } - - m_bank->set_bank(bank); - - m_lastvalue = data; - - m_disk_data[offset] = data; -} - -uint8_t pcxt_state::port_a_r() -{ - return 0xaa;//harmless keyboard error occurs without this -} - -uint8_t pcxt_state::port_b_r() -{ - return m_port_b_data; -} - -uint8_t pcxt_state::port_c_r() -{ - return 0x00;// DIPS? -} - -/*'buzzer' sound routes here*/ -/* Filetto uses this for either beep and um5100 sound routing,probably there's a mux somewhere.*/ -/* The Korean Tetris uses it as a regular buzzer,probably the sound is all in there...*/ -void pcxt_state::port_b_w(uint8_t data) -{ - m_mb->m_pit8253->write_gate2(BIT(data, 0)); - m_mb->pc_speaker_set_spkrdata(BIT(data, 1)); - m_port_b_data = data; -// m_cvsd->digit_w(data); -} - -/*Floppy Disk Controller 765 device*/ -/*Currently we only emulate it at a point that the BIOS will pass the checks*/ - -#define FDC_BUSY 0x10 -#define FDC_WRITE 0x40 -#define FDC_READ 0x00 /*~0x40*/ - -uint8_t pcxt_state::fdc765_status_r() -{ - uint8_t tmp; - tmp = m_status | 0x80; - m_clr_status++; - if(m_clr_status == 0x10) - { - m_status = 0; - m_clr_status = 0; - } - return tmp; -} - -uint8_t pcxt_state::fdc765_data_r() -{ - m_status = (FDC_READ); - m_mb->m_pic8259->ir6_w(0); - return 0xc0; -} - -void pcxt_state::fdc765_data_w(uint8_t data) -{ - m_status = (FDC_WRITE); -} - - -void pcxt_state::fdc_dor_w(uint8_t data) -{ - m_mb->m_pic8259->ir6_w(1); -} - -// TODO: um5100 device; the actual codec may be sightly different -void pcxt_state::voice_start_w(uint8_t data) -{ - m_sample->adjust(attotime::zero, 0, attotime::from_hz(28000)); - m_bit = 7; - m_vaddr = ((m_voice & 0xf / 5) | (BIT(m_voice, 4) << 2)) * 0x8000; - logerror("%x %x\n",m_voice,m_vaddr); -} - -void pcxt_state::filetto_map(address_map &map) -{ - map(0xc0000, 0xcffff).m(m_bank, FUNC(address_map_bank_device::amap8)); - map(0xf0000, 0xfffff).rom().region("bios", 0); -} - -void pcxt_state::filetto_io(address_map &map) -{ - map.global_mask(0x3ff); - map(0x0000, 0x00ff).m(m_mb, FUNC(pc_noppi_mb_device::map)); - map(0x0060, 0x0060).r(FUNC(pcxt_state::port_a_r)); //not a real 8255 - map(0x0061, 0x0061).rw(FUNC(pcxt_state::port_b_r), FUNC(pcxt_state::port_b_w)); - map(0x0062, 0x0062).r(FUNC(pcxt_state::port_c_r)); - map(0x0201, 0x0201).portr("COIN"); //game port - map(0x0310, 0x0311).rw(FUNC(pcxt_state::disk_iobank_r), FUNC(pcxt_state::disk_iobank_w)); //Prototyping card - map(0x0312, 0x0312).portr("IN0"); //Prototyping card,read only - map(0x0313, 0x0313).w(FUNC(pcxt_state::voice_start_w)); - map(0x03f2, 0x03f2).w(FUNC(pcxt_state::fdc_dor_w)); - map(0x03f4, 0x03f4).r(FUNC(pcxt_state::fdc765_status_r)); //765 Floppy Disk Controller (FDC) Status - map(0x03f5, 0x03f5).rw(FUNC(pcxt_state::fdc765_data_r), FUNC(pcxt_state::fdc765_data_w));//FDC Data -} - -void pcxt_state::tetriskr_map(address_map &map) -{ - map(0xf0000, 0xfffff).rom().region("bios", 0); -} - -void pcxt_state::tetriskr_io(address_map &map) -{ - map.global_mask(0x3ff); - map(0x0000, 0x00ff).m(m_mb, FUNC(pc_noppi_mb_device::map)); - map(0x0060, 0x0060).r(FUNC(pcxt_state::port_a_r)); //not a real 8255 - map(0x0061, 0x0061).rw(FUNC(pcxt_state::port_b_r), FUNC(pcxt_state::port_b_w)); - map(0x0062, 0x0062).r(FUNC(pcxt_state::port_c_r)); - map(0x03c8, 0x03c8).portr("IN0"); - map(0x03c9, 0x03c9).portr("IN1"); -// map(0x03ce, 0x03ce).portr("IN1"); //read then discarded? -} - -void pcxt_state::bank_map(address_map &map) -{ - map(0x00000, 0x3ffff).rom().region("game_prg", 0); -} - -static INPUT_PORTS_START( filetto ) - PORT_START("IN0") - PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_JOYSTICK_DOWN ) PORT_4WAY PORT_PLAYER(1) - PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_JOYSTICK_LEFT ) PORT_4WAY PORT_PLAYER(1) - PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_JOYSTICK_RIGHT ) PORT_4WAY PORT_PLAYER(1) - PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_BUTTON1 ) PORT_PLAYER(1) - PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_JOYSTICK_DOWN ) PORT_4WAY PORT_PLAYER(2) - PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_JOYSTICK_LEFT ) PORT_4WAY PORT_PLAYER(2) - PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_JOYSTICK_RIGHT ) PORT_4WAY PORT_PLAYER(2) - PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_BUTTON1 ) PORT_PLAYER(2) - - PORT_START("IN1") - PORT_DIPNAME( 0x01, 0x01, DEF_STR( Coinage ) ) - PORT_DIPSETTING( 0x00, DEF_STR( 2C_1C ) ) - PORT_DIPSETTING( 0x01, DEF_STR( 1C_1C ) ) - PORT_DIPNAME( 0x02, 0x00, DEF_STR( Demo_Sounds ) ) - PORT_DIPSETTING( 0x02, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x04, 0x04, "Extra Play" ) - PORT_DIPSETTING( 0x04, DEF_STR( No ) ) - PORT_DIPSETTING( 0x00, "Play at 6th match reached" ) - PORT_DIPNAME( 0x08, 0x08, DEF_STR( Difficulty ) ) - PORT_DIPSETTING( 0x00, DEF_STR( Normal ) ) - PORT_DIPSETTING( 0x08, DEF_STR( Hard ) ) - PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_START1 ) - PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_START2 ) - PORT_BIT( 0xc0, IP_ACTIVE_LOW, IPT_UNUSED ) - - PORT_START("COIN") - PORT_BIT( 0x0f, IP_ACTIVE_LOW, IPT_UNUSED ) - PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_COIN1 ) - PORT_BIT( 0xe0, IP_ACTIVE_LOW, IPT_UNUSED ) - - PORT_START( "pcvideo_cga_config" ) - PORT_BIT( 0xff, IP_ACTIVE_HIGH, IPT_UNUSED ) -INPUT_PORTS_END - -static INPUT_PORTS_START( tetriskr ) - PORT_START("IN0") - PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_COIN1 ) PORT_IMPULSE(2) - PORT_DIPNAME( 0x02, 0x02, DEF_STR( Unknown ) ) //probably unused - PORT_DIPSETTING( 0x02, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_BUTTON2 ) PORT_PLAYER(1) - PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_JOYSTICK_DOWN ) PORT_4WAY PORT_PLAYER(1) - PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_JOYSTICK_LEFT ) PORT_4WAY PORT_PLAYER(1) - PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_JOYSTICK_RIGHT ) PORT_4WAY PORT_PLAYER(1) - PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_BUTTON1 ) PORT_PLAYER(1) - PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_START1 ) - PORT_START("IN1") //dip-switches - PORT_DIPNAME( 0x03, 0x03, "Starting Level" ) - PORT_DIPSETTING( 0x03, "0" ) - PORT_DIPSETTING( 0x02, "2" ) - PORT_DIPSETTING( 0x01, "4" ) - PORT_DIPSETTING( 0x00, "6" ) - PORT_DIPNAME( 0x04, 0x04, "Starting Bomb" ) - PORT_DIPSETTING( 0x00, DEF_STR( No ) ) - PORT_DIPSETTING( 0x04, DEF_STR( Yes ) ) - PORT_DIPNAME( 0x08, 0x08, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x08, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x10, 0x10, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x10, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x20, 0x20, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x20, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0xc0, 0xc0, DEF_STR( Coinage ) ) -// PORT_DIPSETTING( 0x00, DEF_STR( 2C_1C ) ) duplicate - PORT_DIPSETTING( 0x40, DEF_STR( 2C_1C ) ) - PORT_DIPSETTING( 0xc0, DEF_STR( 1C_1C ) ) - PORT_DIPSETTING( 0x80, DEF_STR( 1C_2C ) ) - - PORT_START( "pcvideo_cga_config" ) - PORT_BIT( 0xff, IP_ACTIVE_HIGH, IPT_UNUSED ) -INPUT_PORTS_END - -void pcxt_state::device_timer(emu_timer &timer, device_timer_id id, int param, void *ptr) -{ - m_cvsd->digit_w(BIT(m_samples->as_u8(m_vaddr), m_bit)); - m_cvsd->clock_w(1); - m_cvsd->clock_w(0); - if (m_bit == 0) - { - m_vaddr++; - m_bit = 8; - if (!(m_vaddr % 0x8000)) - m_sample->adjust(attotime::never); - } - m_bit--; -} - -void pcxt_state::machine_start() -{ - m_sample = timer_alloc(); - - m_status = 0; - m_clr_status = 0; -} - -void pcxt_state::machine_reset() -{ - m_lastvalue = -1; - m_voice = 0; -} - -static void filetto_isa8_cards(device_slot_interface &device) -{ - device.option_add_internal("filetto", ISA8_CGA_FILETTO); - device.option_add_internal("tetriskr", ISA8_CGA_TETRISKR); -} - - -void pcxt_state::filetto(machine_config &config) -{ - I8088(config, m_maincpu, XTAL(14'318'181)/3); - m_maincpu->set_addrmap(AS_PROGRAM, &pcxt_state::filetto_map); - m_maincpu->set_addrmap(AS_IO, &pcxt_state::filetto_io); - m_maincpu->set_irq_acknowledge_callback("mb:pic8259", FUNC(pic8259_device::inta_cb)); - - PCNOPPI_MOTHERBOARD(config, m_mb, 0).set_cputag(m_maincpu); - m_mb->int_callback().set_inputline(m_maincpu, 0); - m_mb->nmi_callback().set_inputline(m_maincpu, INPUT_LINE_NMI); - - ISA8_SLOT(config, "isa1", 0, "mb:isa", filetto_isa8_cards, "filetto", true); // FIXME: determine ISA bus clock - - HC55516(config, m_cvsd, 0).add_route(ALL_OUTPUTS, "mb:mono", 0.60); //8923S-UM5100 is a HC55536 with ROM hook-up - - RAM(config, RAM_TAG).set_default_size("640K"); - - ADDRESS_MAP_BANK(config, m_bank).set_map(&pcxt_state::bank_map).set_options(ENDIANNESS_LITTLE, 8, 18, 0x10000); -} - -void pcxt_state::tetriskr(machine_config &config) -{ - I8088(config, m_maincpu, XTAL(14'318'181)/3); - m_maincpu->set_addrmap(AS_PROGRAM, &pcxt_state::tetriskr_map); - m_maincpu->set_addrmap(AS_IO, &pcxt_state::tetriskr_io); - m_maincpu->set_irq_acknowledge_callback("mb:pic8259", FUNC(pic8259_device::inta_cb)); - - PCNOPPI_MOTHERBOARD(config, m_mb, 0).set_cputag(m_maincpu); - m_mb->int_callback().set_inputline(m_maincpu, 0); - m_mb->nmi_callback().set_inputline(m_maincpu, INPUT_LINE_NMI); - - ISA8_SLOT(config, "isa1", 0, "mb:isa", filetto_isa8_cards, "tetriskr", true); // FIXME: determine ISA bus clock - - RAM(config, RAM_TAG).set_default_size("64K"); -} - -ROM_START( filetto ) - ROM_REGION( 0x10000, "bios", 0 ) - ROM_LOAD("u49.bin", 0xc000, 0x2000, CRC(1be6948a) SHA1(9c433f63d347c211ee4663f133e8417221bc4bf0)) - ROM_RELOAD( 0x8000, 0x2000 ) - ROM_RELOAD( 0x4000, 0x2000 ) - ROM_RELOAD( 0x0000, 0x2000 ) - ROM_LOAD("u55.bin", 0xe000, 0x2000, CRC(1e455ed7) SHA1(786d18ce0ab1af45fc538a2300853e497488f0d4) ) - ROM_RELOAD( 0xa000, 0x2000 ) - ROM_RELOAD( 0x6000, 0x2000 ) - ROM_RELOAD( 0x2000, 0x2000 ) - - ROM_REGION( 0x40000, "game_prg", 0 ) // program data - ROM_LOAD( "m0.u1", 0x00000, 0x10000, CRC(2408289d) SHA1(eafc144a557a79b58bcb48545cb9c9778e61fcd3) ) - ROM_LOAD( "m1.u2", 0x10000, 0x10000, CRC(5b623114) SHA1(0d9a14e6b7f57ce4fa09762343b610a973910f58) ) - ROM_LOAD( "m2.u3", 0x20000, 0x10000, CRC(abc64869) SHA1(564fc9d90d241a7b7776160b3fd036fb08037355) ) - ROM_LOAD( "m3.u4", 0x30000, 0x10000, CRC(0c1e8a67) SHA1(f1b9280c65fcfcb5ec481cae48eb6f52d6cdbc9d) ) - - ROM_REGION( 0x40000, "samples", 0 ) // UM5100 sample roms? - ROM_LOAD("v1.u15", 0x00000, 0x20000, CRC(613ddd07) SHA1(ebda3d559315879819cb7034b5696f8e7861fe42) ) - ROM_LOAD("v2.u14", 0x20000, 0x20000, CRC(427e012e) SHA1(50514a6307e63078fe7444a96e39d834684db7df) ) -ROM_END - -ROM_START( tetriskr ) - ROM_REGION( 0x10000, "bios", 0 ) /* code */ - ROM_LOAD( "b-10.u10", 0x0000, 0x10000, CRC(efc2a0f6) SHA1(5f0f1e90237bee9b78184035a32055b059a91eb3) ) - ROM_FILL( 0x1bdb, 1, 0xba ) // patch to work around input bug mentioned above - ROM_FILL( 0x1bdc, 1, 0x00 ) - ROM_FILL( 0x1bdd, 1, 0x01 ) - ROM_FILL( 0x1bde, 1, 0x8e ) - ROM_FILL( 0x1bdf, 1, 0xda ) -ROM_END - -GAME( 1990, filetto, 0, filetto, filetto, pcxt_state, empty_init, ROT0, "Novarmatic", "Filetto (v1.05 901009)", MACHINE_IMPERFECT_SOUND ) -GAME( 1988?,tetriskr, 0, tetriskr, tetriskr, pcxt_state, empty_init, ROT0, "bootleg", "Tetris (Korean bootleg of Mirrorsoft PC-XT Tetris)", MACHINE_IMPERFECT_SOUND ) |