diff options
Diffstat (limited to 'src/mame/drivers/pasha2.c')
-rw-r--r-- | src/mame/drivers/pasha2.c | 464 |
1 files changed, 464 insertions, 0 deletions
diff --git a/src/mame/drivers/pasha2.c b/src/mame/drivers/pasha2.c new file mode 100644 index 00000000000..d49b0fb75af --- /dev/null +++ b/src/mame/drivers/pasha2.c @@ -0,0 +1,464 @@ +/******************************************************************** + +Pasha Pasha 2 +Dong Sung, 1998 + +3PLAY +|--------------------------------------------------| +| DA1311 UM53 AD-65 DREAM 9.6MHz | +|KA22065 TL062 UM51 AD-65 RESET_SW | +| VOL1 VOL2 1MHz TL7705 | +| | +| DSW2(8) 20MHz GM71C18163 | +| 93C46 UM2 | +| PAL | +|J | +|A | +|M E1-16XT AT89C52| +|M | +|A U102 | +| 6116 | +| 6116 U3 U101 | +| | +| | +| 12MHz| +| A42MX16 | +| DSW1(8) | +| UCN5801 | +| UCN5801 | +| 16MHz | +|--------------------------------------------------| +Notes: + U3 - 27C040 EPROM (DIP32) + UM2/UM51/53- 29F040 EPROM (PLCC32) + U101/102 - Each location contains a small adapter board plugged into a DIP42 socket. Each + adapter board holds 2x Intel E28F016S5 TSOP40 16M FlashROMs. On the PCB under the ROMs + it's marked '32MASK'. However, the adapter boards are not standard. If you try to read + the ROMs while they are _ON-THE-ADAPTER_ as a 32M DIP42 EPROM (such as 27C322), the + FlashROMs are damaged and the PCB no longer works :( + Thus, the FlashROMs must be removed and read separately! + The small adapter boards with their respective FlashROMs are laid out like this........ + + |------------------------------| + | | + | U2 U1 | U102 + | | + |------------------------------| + + |------------------------------| + | | + | U2 U1 | U101 + | | + |------------------------------| + + A42MX16 - Actel A42MX16 FPGA (QFP160) + AT89C52 - Atmel AT89C52 Microcontroller w/8k internal FlashROM, clock 12MHz (DIP40) + E1-16XT - Hyperstone E1-16XT CPU, clock 20MHz + DREAM - ATMEL DREAM SAM9773 Single Chip Synthesizer/MIDI with Effects and Serial Interface, clock 9.6MHz (TQFP80) + AD-65 - Oki compatible M6295 sound chip, clock 1MHz + 5493R45 - ISSI 5493R45-001 128k x8 SRAM (SOJ32) + GM71C18163 - Hynix 1M x16 DRAM (SOJ42) + VSync - 60Hz + HSync - 15.15kHz + + driver by Pierpaolo Prazzoli + + TODO: + - eeprom - is it used? + - irq2 - sound related? reads the 2 unmapped input registers. + - irq3 - it only writes a 0 into memory and changes a registe + - simulate music (DREAM chip) + +*********************************************************************/ + +#include "driver.h" +#include "machine/eeprom.h" +#include "sound/okim6295.h" + +static UINT16 *bitmap0, *bitmap1, *wram; +static int vbuffer = 0; + +static WRITE16_HANDLER( pasha2_misc_w ) +{ + if(offset) + { + if(data & 0x0800) + { + static int old_bank = -1; + int bank = data & 0xf000; + + if(bank != old_bank) + { + old_bank = bank; + + switch(bank) + { + case 0x8000: memory_set_bankptr(1, memory_region(REGION_USER2) + 0x400000 * 0); break; + case 0x9000: memory_set_bankptr(1, memory_region(REGION_USER2) + 0x400000 * 1); break; + case 0xa000: memory_set_bankptr(1, memory_region(REGION_USER2) + 0x400000 * 2); break; + case 0xb000: memory_set_bankptr(1, memory_region(REGION_USER2) + 0x400000 * 3); break; + case 0xc000: memory_set_bankptr(1, memory_region(REGION_USER2) + 0x400000 * 4); break; + case 0xd000: memory_set_bankptr(1, memory_region(REGION_USER2) + 0x400000 * 5); break; + } + } + } + } +} + +static WRITE16_HANDLER( pasha2_palette_w ) +{ + int color; + COMBINE_DATA(&paletteram16[offset]); + + offset &= 0xff; + + color = (paletteram16[offset] >> 8) | (paletteram16[offset+0x100] & 0xff00); + palette_set_color_rgb(Machine,offset*2+0,pal5bit(color),pal5bit(color >> 5),pal5bit(color >> 10)); + + color = (paletteram16[offset] & 0xff) | ((paletteram16[offset+0x100] & 0xff) << 8); + palette_set_color_rgb(Machine,offset*2+1,pal5bit(color),pal5bit(color >> 5),pal5bit(color >> 10)); +} + +static WRITE16_HANDLER( vbuffer_set_w ) +{ + vbuffer = 1; +} + +static WRITE16_HANDLER( vbuffer_clear_w ) +{ + vbuffer = 0; +} + +static WRITE16_HANDLER( bitmap_0_w ) +{ + COMBINE_DATA(&bitmap0[offset + vbuffer*0x20000/2]); +} + +static WRITE16_HANDLER( bitmap_1_w ) +{ + // handle overlapping pixels without writing them + switch(mem_mask) + { + case 0: + bitmap_1_w(offset,data,0x00ff); + bitmap_1_w(offset,data,0xff00); + return; + + case 0x00ff: + if((data & 0xff00) == 0xff00) + return; + break; + + case 0xff00: + if((data & 0x00ff) == 0x00ff) + return; + break; + } + + COMBINE_DATA(&bitmap1[offset + vbuffer*0x20000/2]); +} + +static READ16_HANDLER( oki_0_r ) +{ + if(offset) + return OKIM6295_status_0_r(0); + else + return 0; +} + +static WRITE16_HANDLER( oki_0_w ) +{ + if(offset) + OKIM6295_data_0_w(0, data); +} + +static WRITE16_HANDLER( oki_1_w ) +{ + if(offset) + OKIM6295_data_1_w(0, data); +} + +static READ16_HANDLER( oki_1_r ) +{ + if(offset) + return OKIM6295_status_1_r(0); + else + return 0; +} + +static WRITE16_HANDLER( oki_0_bank_w ) +{ + if(offset) + OKIM6295_set_bank_base(0, (data & 1) * 0x40000); +} + +static WRITE16_HANDLER( oki_1_bank_w ) +{ + if(offset) + OKIM6295_set_bank_base(1, (data & 1) * 0x40000); +} + +static WRITE16_HANDLER( pasha2_lamps_w ) +{ + if(data) + popmessage("1P: %c%c%c 2P: %c%c%c 3P: %c%c%c", + (data & 0x001) ? 'R' : '-', + (data & 0x002) ? 'G' : '-', + (data & 0x004) ? 'B' : '-', + (data & 0x010) ? 'R' : '-', + (data & 0x020) ? 'G' : '-', + (data & 0x040) ? 'B' : '-', + (data & 0x100) ? 'R' : '-', + (data & 0x200) ? 'G' : '-', + (data & 0x400) ? 'B' : '-'); +} + +static ADDRESS_MAP_START( pasha2_map, ADDRESS_SPACE_PROGRAM, 16 ) + AM_RANGE(0x00000000, 0x001fffff) AM_RAM AM_BASE(&wram) + AM_RANGE(0x40000000, 0x4001ffff) AM_RAM AM_WRITE(bitmap_0_w) + AM_RANGE(0x40020000, 0x4003ffff) AM_RAM AM_WRITE(bitmap_1_w) + AM_RANGE(0x40060000, 0x40060001) AM_WRITENOP + AM_RANGE(0x40064000, 0x40064001) AM_WRITENOP + AM_RANGE(0x40068000, 0x40068001) AM_WRITENOP + AM_RANGE(0x4006c000, 0x4006c001) AM_WRITENOP + AM_RANGE(0x40070000, 0x40070001) AM_WRITE(vbuffer_clear_w) + AM_RANGE(0x40074000, 0x40074001) AM_WRITE(vbuffer_set_w) + AM_RANGE(0x40078000, 0x40078001) AM_WRITENOP //once at startup -> to disable the eeprom? + AM_RANGE(0x80000000, 0x803fffff) AM_ROMBANK(1) + AM_RANGE(0xe0000000, 0xe00003ff) AM_RAM AM_WRITE(pasha2_palette_w) AM_BASE(&paletteram16) //tilemap? palette? + AM_RANGE(0xfff80000, 0xffffffff) AM_ROM AM_REGION(REGION_USER1,0) +ADDRESS_MAP_END + +static ADDRESS_MAP_START( pasha2_io, ADDRESS_SPACE_IO, 16 ) + AM_RANGE(0x08, 0x0b) AM_READNOP //sound status? + AM_RANGE(0x18, 0x1b) AM_READNOP //sound status? + AM_RANGE(0x20, 0x23) AM_WRITE(pasha2_lamps_w) + AM_RANGE(0x40, 0x43) AM_READ(input_port_0_word_r) + AM_RANGE(0x60, 0x63) AM_READ(input_port_1_word_r) + AM_RANGE(0x80, 0x83) AM_READ(input_port_2_word_r) + AM_RANGE(0xa0, 0xa3) AM_WRITENOP //soundlatch? + AM_RANGE(0xc0, 0xc3) AM_WRITE(pasha2_misc_w) + AM_RANGE(0xe0, 0xe3) AM_READWRITE(oki_0_r, oki_0_w) + AM_RANGE(0xe4, 0xe7) AM_READWRITE(oki_1_r, oki_1_w) + AM_RANGE(0xe8, 0xeb) AM_WRITE(oki_0_bank_w) + AM_RANGE(0xec, 0xef) AM_WRITE(oki_1_bank_w) +ADDRESS_MAP_END + +static INPUT_PORTS_START( pasha2 ) + PORT_START + PORT_BIT( 0x0001, IP_ACTIVE_LOW, IPT_UNKNOWN ) + PORT_BIT( 0x0002, IP_ACTIVE_LOW, IPT_UNKNOWN ) + PORT_BIT( 0x0004, IP_ACTIVE_LOW, IPT_UNKNOWN ) + PORT_BIT( 0x0008, IP_ACTIVE_LOW, IPT_UNKNOWN ) + PORT_BIT( 0x0010, IP_ACTIVE_LOW, IPT_UNKNOWN ) + PORT_BIT( 0x0020, IP_ACTIVE_LOW, IPT_UNKNOWN ) + PORT_BIT( 0x0040, IP_ACTIVE_LOW, IPT_UNKNOWN ) + PORT_BIT( 0x0080, IP_ACTIVE_LOW, IPT_UNKNOWN ) + PORT_BIT( 0x0100, IP_ACTIVE_LOW, IPT_COIN1 ) + PORT_BIT( 0x0200, IP_ACTIVE_LOW, IPT_COIN2 ) + PORT_BIT( 0x0400, IP_ACTIVE_LOW, IPT_COIN3 ) + PORT_BIT( 0x0800, IP_ACTIVE_LOW, IPT_UNKNOWN ) + PORT_BIT( 0x1000, IP_ACTIVE_LOW, IPT_UNKNOWN ) + PORT_BIT( 0x2000, IP_ACTIVE_LOW, IPT_UNKNOWN ) + PORT_BIT( 0x4000, IP_ACTIVE_LOW, IPT_UNKNOWN ) + PORT_BIT( 0x8000, IP_ACTIVE_LOW, IPT_UNKNOWN ) + + // 2 physical dip-switches + PORT_START + PORT_DIPNAME( 0x0001, 0x0001, DEF_STR( Unknown ) ) + PORT_DIPSETTING( 0x0001, DEF_STR( Off ) ) + PORT_DIPSETTING( 0x0000, DEF_STR( On ) ) + PORT_DIPNAME( 0x0002, 0x0002, DEF_STR( Unknown ) ) + PORT_DIPSETTING( 0x0002, DEF_STR( Off ) ) + PORT_DIPSETTING( 0x0000, DEF_STR( On ) ) + PORT_DIPNAME( 0x0004, 0x0004, DEF_STR( Unknown ) ) + PORT_DIPSETTING( 0x0004, DEF_STR( Off ) ) + PORT_DIPSETTING( 0x0000, DEF_STR( On ) ) + PORT_DIPNAME( 0x0018, 0x0008, DEF_STR( Lives ) ) + PORT_DIPSETTING( 0x0018, "1" ) + PORT_DIPSETTING( 0x0010, "2" ) + PORT_DIPSETTING( 0x0008, "3" ) + PORT_DIPSETTING( 0x0000, "5" ) + PORT_DIPNAME( 0x0060, 0x0060, DEF_STR( Coinage ) ) + PORT_DIPSETTING( 0x0000, DEF_STR( 5C_1C ) ) + PORT_DIPSETTING( 0x0020, DEF_STR( 3C_1C ) ) + PORT_DIPSETTING( 0x0040, DEF_STR( 2C_1C ) ) + PORT_DIPSETTING( 0x0060, DEF_STR( 1C_1C ) ) + PORT_DIPNAME( 0x0080, 0x0080, DEF_STR( Free_Play ) ) + PORT_DIPSETTING( 0x0080, DEF_STR( Off ) ) + PORT_DIPSETTING( 0x0000, DEF_STR( On ) ) + PORT_DIPNAME( 0x0100, 0x0100, DEF_STR( Unknown ) ) + PORT_DIPSETTING( 0x0100, DEF_STR( Off ) ) + PORT_DIPSETTING( 0x0000, DEF_STR( On ) ) + PORT_DIPNAME( 0x0200, 0x0200, DEF_STR( Unknown ) ) + PORT_DIPSETTING( 0x0200, DEF_STR( Off ) ) + PORT_DIPSETTING( 0x0000, DEF_STR( On ) ) + PORT_DIPNAME( 0x0400, 0x0400, DEF_STR( Unknown ) ) + PORT_DIPSETTING( 0x0400, DEF_STR( Off ) ) + PORT_DIPSETTING( 0x0000, DEF_STR( On ) ) + PORT_DIPNAME( 0x0800, 0x0800, DEF_STR( Unknown ) ) + PORT_DIPSETTING( 0x0800, DEF_STR( Off ) ) + PORT_DIPSETTING( 0x0000, DEF_STR( On ) ) + PORT_DIPNAME( 0x1000, 0x1000, DEF_STR( Unknown ) ) + PORT_DIPSETTING( 0x1000, DEF_STR( Off ) ) + PORT_DIPSETTING( 0x0000, DEF_STR( On ) ) + PORT_DIPNAME( 0x2000, 0x2000, DEF_STR( Unknown ) ) + PORT_DIPSETTING( 0x2000, DEF_STR( Off ) ) + PORT_DIPSETTING( 0x0000, DEF_STR( On ) ) + PORT_DIPNAME( 0x4000, 0x4000, DEF_STR( Unknown ) ) + PORT_DIPSETTING( 0x4000, DEF_STR( Off ) ) + PORT_DIPSETTING( 0x0000, DEF_STR( On ) ) + PORT_DIPNAME( 0x8000, 0x8000, DEF_STR( Unknown ) ) + PORT_DIPSETTING( 0x8000, DEF_STR( Off ) ) + PORT_DIPSETTING( 0x0000, DEF_STR( On ) ) + + PORT_START + PORT_BIT( 0x0001, IP_ACTIVE_LOW, IPT_BUTTON1 ) PORT_PLAYER(1) + PORT_BIT( 0x0002, IP_ACTIVE_LOW, IPT_BUTTON2 ) PORT_PLAYER(1) + PORT_BIT( 0x0004, IP_ACTIVE_LOW, IPT_BUTTON3 ) PORT_PLAYER(1) + PORT_BIT( 0x0008, IP_ACTIVE_LOW, IPT_START1 ) + PORT_BIT( 0x0010, IP_ACTIVE_LOW, IPT_BUTTON1 ) PORT_PLAYER(2) + PORT_BIT( 0x0020, IP_ACTIVE_LOW, IPT_BUTTON2 ) PORT_PLAYER(2) + PORT_BIT( 0x0040, IP_ACTIVE_LOW, IPT_BUTTON3 ) PORT_PLAYER(2) + PORT_BIT( 0x0080, IP_ACTIVE_LOW, IPT_START2 ) + PORT_BIT( 0x0100, IP_ACTIVE_LOW, IPT_UNKNOWN ) + PORT_BIT( 0x0200, IP_ACTIVE_LOW, IPT_UNKNOWN ) + PORT_BIT( 0x0400, IP_ACTIVE_LOW, IPT_UNKNOWN ) + PORT_BIT( 0x0800, IP_ACTIVE_LOW, IPT_UNKNOWN ) + PORT_BIT( 0x1000, IP_ACTIVE_LOW, IPT_BUTTON1 ) PORT_PLAYER(3) + PORT_BIT( 0x2000, IP_ACTIVE_LOW, IPT_BUTTON2 ) PORT_PLAYER(3) + PORT_BIT( 0x4000, IP_ACTIVE_LOW, IPT_BUTTON3 ) PORT_PLAYER(3) + PORT_BIT( 0x8000, IP_ACTIVE_LOW, IPT_START3 ) +INPUT_PORTS_END + +static VIDEO_START( pasha2 ) +{ + bitmap0 = auto_malloc(0x40000); + bitmap1 = auto_malloc(0x40000); +} + +static VIDEO_UPDATE( pasha2 ) +{ + int x,y,count; + int color; + + /* 2 512x256 bitmaps */ + + count = 0; + for (y=0;y <= cliprect->max_y;y++) + { + for (x=0;x < 512/2;x++) + { + if(x*2 < cliprect->max_x) + { + color = (bitmap0[count + (vbuffer^1)*0x20000/2] & 0xff00) >> 8; + *BITMAP_ADDR16(bitmap, y, x*2 + 0) = machine->pens[(color + 0x100)]; + + color = bitmap0[count + (vbuffer^1)*0x20000/2] & 0xff; + *BITMAP_ADDR16(bitmap, y, x*2 + 1) = machine->pens[(color + 0x100)]; + } + + count++; + } + } + + count = 0; + for (y=0;y <= cliprect->max_y;y++) + { + for (x=0;x < 512/2;x++) + { + if(x*2 < cliprect->max_x) + { + color = bitmap1[count + (vbuffer^1)*0x20000/2] & 0xff; + if(color != 0) + *BITMAP_ADDR16(bitmap, y, x*2 + 1) = machine->pens[(color)]; + + color = (bitmap1[count + (vbuffer^1)*0x20000/2] & 0xff00) >> 8; + if(color != 0) + *BITMAP_ADDR16(bitmap, y, x*2 + 0) = machine->pens[(color)]; + } + + count++; + } + } + + return 0; +} + +static MACHINE_DRIVER_START( pasha2 ) + MDRV_CPU_ADD(E116T /*E116XT*/, 20000000) /* 20 MHz */ + MDRV_CPU_PROGRAM_MAP(pasha2_map,0) + MDRV_CPU_IO_MAP(pasha2_io,0) + MDRV_CPU_VBLANK_INT(irq5_line_pulse, 1) + + MDRV_SCREEN_REFRESH_RATE(60) + MDRV_SCREEN_VBLANK_TIME(DEFAULT_60HZ_VBLANK_DURATION) + + MDRV_NVRAM_HANDLER(93C46) + + /* video hardware */ + MDRV_VIDEO_ATTRIBUTES(VIDEO_TYPE_RASTER) + MDRV_SCREEN_FORMAT(BITMAP_FORMAT_INDEXED16) + MDRV_SCREEN_SIZE(512, 512) + MDRV_SCREEN_VISIBLE_AREA(0, 383, 0, 239) + MDRV_PALETTE_LENGTH(0x200) + + MDRV_VIDEO_START(pasha2) + MDRV_VIDEO_UPDATE(pasha2) + + /* sound hardware */ + MDRV_SPEAKER_STANDARD_MONO("mono") + + MDRV_SOUND_ADD(OKIM6295, 1000000) + MDRV_SOUND_CONFIG(okim6295_interface_region_1_pin7high) + MDRV_SOUND_ROUTE(ALL_OUTPUTS, "mono", 1.0) + + MDRV_SOUND_ADD(OKIM6295, 1000000) + MDRV_SOUND_CONFIG(okim6295_interface_region_2_pin7high) + MDRV_SOUND_ROUTE(ALL_OUTPUTS, "mono", 1.0) + + //and ATMEL DREAM SAM9773 +MACHINE_DRIVER_END + +ROM_START( pasha2 ) + ROM_REGION16_BE( 0x80000, REGION_USER1, 0 ) /* Hyperstone CPU Code */ + ROM_LOAD( "pp2.u3", 0x00000, 0x80000, CRC(1c701273) SHA1(f465323a1d3f2fd752c51c178fafe4cc866e28d6) ) + + ROM_REGION16_BE( 0x400000*6, REGION_USER2, ROMREGION_ERASEFF ) /* data roms */ + ROM_LOAD16_BYTE( "pp2-u2.u101", 0x000000, 0x200000, CRC(85c4a2d0) SHA1(452b24b74bd0b65d2d6852486e2917f94e21ecc8) ) + ROM_LOAD16_BYTE( "pp2-u1.u101", 0x000001, 0x200000, CRC(96cbd04e) SHA1(a4e7dd61194584b3c4217674d78ab2fd96b7b2e0) ) + ROM_LOAD16_BYTE( "pp2-u2.u102", 0x400000, 0x200000, CRC(2097d88c) SHA1(7597578e6ddca00909feac35d9d7331f783b2bd6) ) + ROM_LOAD16_BYTE( "pp2-u1.u102", 0x400001, 0x200000, CRC(7a3492fb) SHA1(de72c4d10e17eaf2b7531f637b42cbb3d07819b5) ) + // empty space, but no empty sockets on the pcb + + ROM_REGION( 0x0800, REGION_CPU2, 0 ) /* AT89C52 (protected) */ + ROM_LOAD( "pasha2_at89c52", 0x0000, 0x0800, NO_DUMP ) /* MCU internal 8K flash */ + + ROM_REGION( 0x80000, REGION_USER3, 0 ) /* SAM9773 sound data */ + ROM_LOAD( "pp2.um2", 0x00000, 0x80000, CRC(86814b37) SHA1(70f8a94410e362669570c39e00492c0d69de6b17) ) + + ROM_REGION( 0x80000, REGION_SOUND1, 0 ) /* Oki Samples */ + ROM_LOAD( "pp2.um51", 0x00000, 0x80000, CRC(3b1b1a30) SHA1(1ea1266d280a2b96ac4ef9fe8ee7b1a5f7861672) ) + + ROM_REGION( 0x80000, REGION_SOUND2, 0 ) /* Oki Samples */ + ROM_LOAD( "pp2.um53", 0x00000, 0x80000, CRC(8a29ad03) SHA1(3e9b0c86d8e3bb0b7691f68ad45431f6f9e8edbd) ) +ROM_END + +static READ16_HANDLER( pasha2_speedup_r ) +{ + if(activecpu_get_pc() == 0x8302) + { + cpu_spinuntil_int(); + } + + return wram[(0x95744/2)+offset]; +} + +static DRIVER_INIT( pasha2 ) +{ + memory_install_read16_handler(0, ADDRESS_SPACE_PROGRAM, 0x95744, 0x95747, 0, 0, pasha2_speedup_r ); + + memory_set_bankptr(1, memory_region(REGION_USER2)); +} + +GAME( 1998, pasha2, 0, pasha2, pasha2, pasha2, ROT0, "Dong Sung", "Pasha Pasha 2", GAME_IMPERFECT_SOUND ) |