summaryrefslogtreecommitdiffstatshomepage
path: root/src/mame/drivers/microkit.cpp
diff options
context:
space:
mode:
Diffstat (limited to 'src/mame/drivers/microkit.cpp')
-rw-r--r--src/mame/drivers/microkit.cpp137
1 files changed, 137 insertions, 0 deletions
diff --git a/src/mame/drivers/microkit.cpp b/src/mame/drivers/microkit.cpp
new file mode 100644
index 00000000000..2d225dc65ff
--- /dev/null
+++ b/src/mame/drivers/microkit.cpp
@@ -0,0 +1,137 @@
+// license:BSD-3-Clause
+// copyright-holders:Curt Coder
+/*
+
+ RCA COSMAC Microkit
+
+ http://www.vintagecomputer.net/browse_thread.cfm?id=511
+
+ Press CR or LF to get the * prompt.
+ Commands:
+ $Pxxxx - Jump to address xxxx
+ ?Mxxxx yyyy - Dump memory starting at xxxx for yyyy bytes
+ !Mxxxx yy zz... - Write data (yy etc) to memory xxxx. Data gets entered when you
+ press the space after the data.
+
+ There's no sound or storage facilities, therefore no software.
+
+ ToDo:
+ - No technical manual or schematic available, so the entire driver is bodgy guesswork.
+ - Address 0 needs to be read/writeable, otherwise the numbers you enter will get
+ internally corrupted.
+ - Address 8000 is IDL which hangs the system, so program counter is preset to 8001.
+ - The keyboard is hooked up serially, which is ok, but the output to the terminal
+ is rubbish, so parallel is used so you can at least see something.
+ - When you enter commands, you can't see what you're doing.
+ - When you enter numbers, they display as rubbish or act as control codes. They
+ internally work though.
+ - The computer looks like a rack-mount metal box with a rudimentary front panel.
+ Buttons are: Reset; Load; Run program; Run Utility
+ There is a RUN LED.
+ None of these items are emulated.
+ It also has a power switch and lamp, and a fuse.
+
+*****************************************************************************************/
+
+#include "emu.h"
+#include "cpu/cosmac/cosmac.h"
+#include "bus/rs232/rs232.h"
+#include "machine/terminal.h"
+
+
+class microkit_state : public driver_device
+{
+public:
+ microkit_state(const machine_config &mconfig, device_type type, const char *tag)
+ : driver_device(mconfig, type, tag)
+ , m_maincpu(*this, "maincpu")
+ , m_rs232(*this, "rs232")
+ , m_terminal(*this, "terminal")
+ { }
+
+ DECLARE_READ_LINE_MEMBER(clear_r);
+ DECLARE_WRITE8_MEMBER(ram_w);
+ DECLARE_READ8_MEMBER(ram_r);
+
+private:
+ virtual void machine_reset();
+ UINT8 m_resetcnt;
+ UINT8 m_ram_data;
+ required_device<cosmac_device> m_maincpu;
+ required_device<rs232_port_device> m_rs232;
+ required_device<generic_terminal_device> m_terminal;
+};
+
+static ADDRESS_MAP_START( microkit_mem, AS_PROGRAM, 8, microkit_state )
+ AM_RANGE(0x0000, 0x0000) AM_READWRITE(ram_r,ram_w)
+ AM_RANGE(0x8000, 0x81ff) AM_ROM AM_REGION("maincpu", 0)
+ AM_RANGE(0x8200, 0x83ff) AM_RAM
+ADDRESS_MAP_END
+
+static ADDRESS_MAP_START( microkit_io, AS_IO, 8, microkit_state )
+ AM_RANGE(0x07, 0x07) AM_WRITENOP // writes a lots of zeros here
+ADDRESS_MAP_END
+
+static INPUT_PORTS_START( microkit )
+INPUT_PORTS_END
+
+READ_LINE_MEMBER( microkit_state::clear_r )
+{
+ if (m_resetcnt < 0x10)
+ m_maincpu->set_state_int(COSMAC_R0, 0x8001); // skip IDL
+ if (m_resetcnt < 0x20)
+ m_resetcnt++;
+ // set reset pin to normal
+ return 1;
+}
+
+READ8_MEMBER( microkit_state::ram_r )
+{
+ return m_ram_data;
+}
+
+WRITE8_MEMBER( microkit_state::ram_w )
+{
+ m_ram_data = data;
+ if (data > 0 && data < 0x80)
+ m_terminal->write(space, 0, data);
+}
+
+void microkit_state::machine_reset()
+{
+ m_resetcnt = 0;
+ m_ram_data = 0;
+}
+
+static DEVICE_INPUT_DEFAULTS_START( serial_keyb )
+ DEVICE_INPUT_DEFAULTS( "RS232_TXBAUD", 0xff, RS232_BAUD_300 )
+ DEVICE_INPUT_DEFAULTS( "RS232_RXBAUD", 0xff, RS232_BAUD_300 )
+ DEVICE_INPUT_DEFAULTS( "RS232_STARTBITS", 0xff, RS232_STARTBITS_1 )
+ DEVICE_INPUT_DEFAULTS( "RS232_DATABITS", 0xff, RS232_DATABITS_8 )
+ DEVICE_INPUT_DEFAULTS( "RS232_PARITY", 0xff, RS232_PARITY_NONE )
+ DEVICE_INPUT_DEFAULTS( "RS232_STOPBITS", 0xff, RS232_STOPBITS_2 )
+DEVICE_INPUT_DEFAULTS_END
+
+
+static MACHINE_CONFIG_START( microkit, microkit_state )
+ // basic machine hardware
+ MCFG_CPU_ADD("maincpu", CDP1802, 1750000)
+ MCFG_CPU_PROGRAM_MAP(microkit_mem)
+ MCFG_CPU_IO_MAP(microkit_io)
+ MCFG_COSMAC_WAIT_CALLBACK(VCC)
+ MCFG_COSMAC_CLEAR_CALLBACK(READLINE(microkit_state, clear_r))
+
+ /* video hardware */
+ MCFG_RS232_PORT_ADD("rs232", default_rs232_devices, "keyboard")
+ MCFG_RS232_RXD_HANDLER(DEVWRITELINE("maincpu", cosmac_device, ef4_w))
+ MCFG_DEVICE_CARD_DEVICE_INPUT_DEFAULTS("keyboard", serial_keyb)
+ MCFG_DEVICE_ADD("terminal", GENERIC_TERMINAL, 0)
+MACHINE_CONFIG_END
+
+ROM_START( microkit )
+ ROM_REGION( 0x200, "maincpu", ROMREGION_INVERT )
+ ROM_LOAD( "3.2b", 0x000, 0x100, CRC(6799357e) SHA1(c46e3322b8b1b6534a7da04806be29fa265951b7) )
+ ROM_LOAD( "4.2a", 0x100, 0x100, CRC(27267bad) SHA1(838df9be2dc175584a1a6ee1770039118e49482e) )
+ROM_END
+
+COMP( 1975, microkit, 0, 0, microkit, microkit, driver_device, 0, "RCA", "COSMAC Microkit", MACHINE_IS_SKELETON | MACHINE_NOT_WORKING | MACHINE_NO_SOUND )