diff options
Diffstat (limited to 'src/mame/drivers/mephisto_mm2.cpp')
-rw-r--r-- | src/mame/drivers/mephisto_mm2.cpp | 558 |
1 files changed, 0 insertions, 558 deletions
diff --git a/src/mame/drivers/mephisto_mm2.cpp b/src/mame/drivers/mephisto_mm2.cpp deleted file mode 100644 index 421b3d86445..00000000000 --- a/src/mame/drivers/mephisto_mm2.cpp +++ /dev/null @@ -1,558 +0,0 @@ -// license:BSD-3-Clause -// copyright-holders:Dirk Verwiebe, Cowering -/****************************************************************************** - Mephisto 4 + 5 Chess Computer - 2007 Dirk V. - -CPU 65C02 P4 (also seen: R65C02P3, G65SC02P-4) -Clock 4.9152 MHz -NMI CLK 600 Hz -IRQ Line is set to VSS -8 KByte SRAM Sony CXK5864-15l - -1-CD74HC4060E 14 Bit Counter -1-CD74HC166E -1-CD74HC251E -1-SN74HC138N TI -1-SN74HC139N TI -1-74HC14AP Toshiba -1-74HC02AP Toshiba -1-74HC00AP Toshiba -1-CD74HC259E - -LCD module: -PCB label HGS 10 122 01 -1-CD4011 -4-CD4015 - -$0000-$1fff S-RAM -$2000 LCD 4 Byte Shift Register writeonly right to left -every 2nd char xor'd by $FF - -2c00-2c07 Keyboard (8to1 Multiplexer) 74HCT251 -2*8 Matrix -Adr. 0x3407 -==0 !=0 -2c00 CL E5 -2c01 POS F6 -2c02 MEMO G7 -2c03 INFO A1 -2c04 LEV H8 -2c05 ENT B2 -2c06 >0 C3 -2c07 <9 D4 - -$3400-$3407 LED 1-6, Buzzer, Keyboard select - -$2400 // Chess Board -$2800 // Chess Board -$3000 // Chess Board - -$4000-7FFF Opening Modul HG550 -$8000-$FFF ROM - -Mephisto 4 Turbo Kit 18mhz - (mm4tk) - This is a replacement rom combining the turbo kit initial rom with the original MM IV. - The Turbo Kit powers up to it's tiny rom, copies itself to ram, banks in normal rom, - copies that to faster SRAM, then patches the checksum and the LED blink delays. - If someone else wants to code up the power up banking, feel free - - There is an undumped MM V Turbo Kit, which will be the exact same except for location of - the patches. The mm5tk just needs the normal mm5 ROM swapped out for that one to - blinks the LEDs a little slower. - - -- Cowering (2011) - -The MM V prototype was the program that Ed Schroeder participated with as "Rebel" at the -1989 WMCCC in Portorose. It was used with the TK20 TurboKit. -http://chesseval.com/ChessEvalJournal/PrototypeMMV.htm - - -TODO: -- need to emulate TurboKit properly, also for mm5p (it's not as simple as a CPU - overclock plus ROM patch) -- LCD module is 8.8.:8.8 like mephisto_brikett/mm1 (so, add ":" in the middle) - -******************************************************************************/ - -#include "emu.h" -#include "cpu/m6502/m65c02.h" -#include "machine/74259.h" -#include "machine/mmboard.h" -#include "machine/timer.h" -#include "sound/dac.h" -#include "sound/volt_reg.h" -#include "bus/generic/slot.h" -#include "bus/generic/carts.h" -#include "speaker.h" - -// internal artwork -#include "mephisto_mm2.lh" -#include "mephisto_bup.lh" - - -class mephisto_state : public driver_device -{ -public: - mephisto_state(const machine_config &mconfig, device_type type, const char *tag) - : driver_device(mconfig, type, tag) - , m_maincpu(*this, "maincpu") - , m_outlatch(*this, "outlatch") - , m_dac(*this, "dac") - , m_key1(*this, "KEY1_%u", 0U) - , m_key2(*this, "KEY2_%u", 0U) - , m_digits(*this, "digit%u", 0U) - { } - - DECLARE_INPUT_CHANGED_MEMBER(reset_button); - - void rebel5(machine_config &config); - void mm4(machine_config &config); - void mm4tk(machine_config &config); - void mm5(machine_config &config); - void mm5p(machine_config &config); - void mm2(machine_config &config); - void bup(machine_config &config); - -private: - required_device<m65c02_device> m_maincpu; - required_device<hc259_device> m_outlatch; - required_device<dac_bit_interface> m_dac; - required_ioport_array<8> m_key1; - required_ioport_array<8> m_key2; - output_finder<4> m_digits; - - DECLARE_WRITE8_MEMBER(write_lcd); - DECLARE_WRITE8_MEMBER(mephisto_nmi_w); - DECLARE_READ8_MEMBER(read_keys); - DECLARE_WRITE_LINE_MEMBER(write_led7); - uint8_t m_lcd_shift_counter; - uint8_t m_led7; - uint8_t m_allowNMI; - virtual void machine_start() override; - virtual void machine_reset() override; - TIMER_DEVICE_CALLBACK_MEMBER(update_nmi); - TIMER_DEVICE_CALLBACK_MEMBER(update_nmi_r5); - - void bup_mem(address_map &map); - void mm2_mem(address_map &map); - void mm4_mem(address_map &map); - void mm5p_mem(address_map &map); - void rebel5_mem(address_map &map); -}; - -void mephisto_state::machine_start() -{ - m_digits.resolve(); - - save_item(NAME(m_lcd_shift_counter)); - save_item(NAME(m_led7)); - save_item(NAME(m_allowNMI)); -} - -void mephisto_state::machine_reset() -{ - m_lcd_shift_counter = 3; - m_allowNMI = 1; - m_led7 = 0xff; -} - - - -/****************************************************************************** - I/O -******************************************************************************/ - -TIMER_DEVICE_CALLBACK_MEMBER(mephisto_state::update_nmi) -{ - if (m_allowNMI) - { - m_allowNMI = 0; - m_maincpu->pulse_input_line(INPUT_LINE_NMI, attotime::zero); - } -} - -TIMER_DEVICE_CALLBACK_MEMBER(mephisto_state::update_nmi_r5) -{ - m_maincpu->pulse_input_line(INPUT_LINE_NMI, attotime::zero); -} - -WRITE8_MEMBER(mephisto_state::write_lcd) -{ - if (m_led7 == 0) - m_digits[m_lcd_shift_counter] = data; // 0x109 MM IV // 0x040 MM V - - m_lcd_shift_counter--; - m_lcd_shift_counter &= 3; - - m_maincpu->set_input_line(0, CLEAR_LINE); -} - -WRITE8_MEMBER(mephisto_state::mephisto_nmi_w) -{ - m_allowNMI = 1; -} - -READ8_MEMBER(mephisto_state::read_keys) -{ - uint8_t data = 0; - - if (!m_outlatch->q7_r()) - { - data = m_key1[offset]->read(); - } - else - { - data = m_key2[offset]->read(); - } - - return data | 0x7f; -} - -WRITE_LINE_MEMBER(mephisto_state::write_led7) -{ - m_led7 = state ? 0x00 : 0xff; -} - - - -/****************************************************************************** - Address Maps -******************************************************************************/ - -void mephisto_state::bup_mem(address_map &map) -{ - map(0x0000, 0x0fff).ram(); - map(0x1000, 0x1007).w("outlatch", FUNC(hc259_device::write_d7)); - map(0x1800, 0x1807).r(FUNC(mephisto_state::read_keys)); - map(0x2000, 0x2000).r("board", FUNC(mephisto_board_device::input_r)); - map(0x2800, 0x2800).w(FUNC(mephisto_state::write_lcd)); - map(0x3000, 0x3000).w("board", FUNC(mephisto_board_device::led_w)); - map(0x3800, 0x3800).w("board", FUNC(mephisto_board_device::mux_w)); - map(0x8000, 0xffff).rom(); -} - -void mephisto_state::mm2_mem(address_map &map) -{ - bup_mem(map); - map(0x4000, 0x7fff).r("cartslot", FUNC(generic_slot_device::read_rom)); // opening library -} - -void mephisto_state::rebel5_mem(address_map &map) -{ - map(0x0000, 0x1fff).ram(); - map(0x2000, 0x2007).w("outlatch", FUNC(hc259_device::write_d7)); - map(0x3000, 0x4000).r("board", FUNC(mephisto_board_device::input_r)); - map(0x3000, 0x3007).r(FUNC(mephisto_state::read_keys)); - map(0x5000, 0x5000).w(FUNC(mephisto_state::write_lcd)); - map(0x6000, 0x6000).w("board", FUNC(mephisto_board_device::led_w)); - map(0x7000, 0x7000).w("board", FUNC(mephisto_board_device::mux_w)); - map(0x8000, 0xffff).rom(); -} - -void mephisto_state::mm5p_mem(address_map &map) -{ - map(0x0000, 0x1fff).ram(); - map(0x2000, 0x2000).w(FUNC(mephisto_state::write_lcd)); - map(0x2400, 0x2407).w("board", FUNC(mephisto_board_device::led_w)).nopr(); - map(0x2800, 0x2800).w("board", FUNC(mephisto_board_device::mux_w)); - map(0x2c00, 0x2c07).r(FUNC(mephisto_state::read_keys)); - map(0x3000, 0x3000).r("board", FUNC(mephisto_board_device::input_r)); - map(0x3400, 0x3407).w("outlatch", FUNC(hc259_device::write_d7)).nopr(); - map(0x3800, 0x3800).w(FUNC(mephisto_state::mephisto_nmi_w)); - map(0x4000, 0xffff).rom(); -} - -void mephisto_state::mm4_mem(address_map &map) -{ - mm5p_mem(map); - map(0x4000, 0x7fff).r("cartslot", FUNC(generic_slot_device::read_rom)); -} - - - -/****************************************************************************** - Input Ports -******************************************************************************/ - -static INPUT_PORTS_START( mephisto ) - PORT_START("KEY1_0") //Port $2c00 - PORT_BIT(0x080, IP_ACTIVE_LOW, IPT_KEYPAD) PORT_NAME("CL") PORT_CODE(KEYCODE_DEL) PORT_CODE(KEYCODE_BACKSPACE) - PORT_START("KEY1_1") //Port $2c01 - PORT_BIT(0x080, IP_ACTIVE_LOW, IPT_KEYPAD) PORT_NAME("POS") PORT_CODE(KEYCODE_O) - PORT_START("KEY1_2") //Port $2c02 - PORT_BIT(0x080, IP_ACTIVE_LOW, IPT_KEYPAD) PORT_NAME("MEM") PORT_CODE(KEYCODE_M) - PORT_START("KEY1_3") //Port $2c03 - PORT_BIT(0x080, IP_ACTIVE_LOW, IPT_KEYPAD) PORT_NAME("INFO") PORT_CODE(KEYCODE_I) - PORT_START("KEY1_4") //Port $2c04 - PORT_BIT(0x080, IP_ACTIVE_LOW, IPT_KEYPAD) PORT_NAME("LEV") PORT_CODE(KEYCODE_L) - PORT_START("KEY1_5") //Port $2c05 - PORT_BIT(0x080, IP_ACTIVE_LOW, IPT_KEYPAD) PORT_NAME("ENT") PORT_CODE(KEYCODE_ENTER) PORT_CODE(KEYCODE_ENTER_PAD) - PORT_START("KEY1_6") //Port $2c06 - PORT_BIT(0x080, IP_ACTIVE_LOW, IPT_KEYPAD) PORT_NAME("Right / White / 0") PORT_CODE(KEYCODE_0) PORT_CODE(KEYCODE_0_PAD) PORT_CODE(KEYCODE_RIGHT) - PORT_START("KEY1_7") //Port $2c07 - PORT_BIT(0x080, IP_ACTIVE_LOW, IPT_KEYPAD) PORT_NAME("Left / Black / 9") PORT_CODE(KEYCODE_9) PORT_CODE(KEYCODE_9_PAD) PORT_CODE(KEYCODE_LEFT) - - PORT_START("KEY2_0") //Port $2c08 - PORT_BIT(0x080, IP_ACTIVE_LOW, IPT_KEYPAD) PORT_NAME("E / 5 / Queen") PORT_CODE(KEYCODE_E) PORT_CODE(KEYCODE_5) PORT_CODE(KEYCODE_5_PAD) - PORT_START("KEY2_1") //Port $2c09 - PORT_BIT(0x080, IP_ACTIVE_LOW, IPT_KEYPAD) PORT_NAME("F / 6 / King") PORT_CODE(KEYCODE_F) PORT_CODE(KEYCODE_6) PORT_CODE(KEYCODE_6_PAD) - PORT_START("KEY2_2") //Port $2c0a - PORT_BIT(0x080, IP_ACTIVE_LOW, IPT_KEYPAD) PORT_NAME("G / 7") PORT_CODE(KEYCODE_G) PORT_CODE(KEYCODE_7) PORT_CODE(KEYCODE_7_PAD) - PORT_START("KEY2_3") //Port $2c0b - PORT_BIT(0x080, IP_ACTIVE_LOW, IPT_KEYPAD) PORT_NAME("A / 1 / Pawn") PORT_CODE(KEYCODE_A) PORT_CODE(KEYCODE_1) PORT_CODE(KEYCODE_1_PAD) - PORT_START("KEY2_4") //Port $2c0c - PORT_BIT(0x080, IP_ACTIVE_LOW, IPT_KEYPAD) PORT_NAME("H / 8") PORT_CODE(KEYCODE_H) PORT_CODE(KEYCODE_8) PORT_CODE(KEYCODE_8_PAD) - PORT_START("KEY2_5") //Port $2c0d - PORT_BIT(0x080, IP_ACTIVE_LOW, IPT_KEYPAD) PORT_NAME("B / 2 / Knight") PORT_CODE(KEYCODE_B) PORT_CODE(KEYCODE_2) PORT_CODE(KEYCODE_2_PAD) - PORT_START("KEY2_6") //Port $2c0e - PORT_BIT(0x080, IP_ACTIVE_LOW, IPT_KEYPAD) PORT_NAME("C / 3 / Bishop") PORT_CODE(KEYCODE_C) PORT_CODE(KEYCODE_3) PORT_CODE(KEYCODE_3_PAD) - PORT_START("KEY2_7") //Port $2c0f - PORT_BIT(0x080, IP_ACTIVE_LOW, IPT_KEYPAD) PORT_NAME("D / 4 / Rook") PORT_CODE(KEYCODE_D) PORT_CODE(KEYCODE_4) PORT_CODE(KEYCODE_4_PAD) - - PORT_START("RESET") - PORT_BIT(0x01, IP_ACTIVE_HIGH, IPT_KEYPAD) PORT_NAME("RES 1") PORT_CODE(KEYCODE_Z) PORT_CODE(KEYCODE_F1) PORT_CHANGED_MEMBER(DEVICE_SELF, mephisto_state, reset_button, 0) - PORT_BIT(0x02, IP_ACTIVE_HIGH, IPT_KEYPAD) PORT_NAME("RES 2") PORT_CODE(KEYCODE_X) PORT_CODE(KEYCODE_F1) PORT_CHANGED_MEMBER(DEVICE_SELF, mephisto_state, reset_button, 0) -INPUT_PORTS_END - -static INPUT_PORTS_START( bup ) - PORT_START("KEY1_0") - PORT_BIT(0x080, IP_ACTIVE_LOW, IPT_KEYPAD) PORT_NAME("1 / Pawn") PORT_CODE(KEYCODE_1) PORT_CODE(KEYCODE_1_PAD) - PORT_START("KEY1_1") - PORT_BIT(0x080, IP_ACTIVE_LOW, IPT_KEYPAD) PORT_NAME("2 / Knight") PORT_CODE(KEYCODE_2) PORT_CODE(KEYCODE_2_PAD) - PORT_START("KEY1_2") - PORT_BIT(0x080, IP_ACTIVE_LOW, IPT_KEYPAD) PORT_NAME("3 / Bishop") PORT_CODE(KEYCODE_3) PORT_CODE(KEYCODE_3_PAD) - PORT_START("KEY1_3") - PORT_BIT(0x080, IP_ACTIVE_LOW, IPT_KEYPAD) PORT_NAME("4 / Rook") PORT_CODE(KEYCODE_4) PORT_CODE(KEYCODE_4_PAD) - PORT_START("KEY1_4") - PORT_BIT(0x080, IP_ACTIVE_LOW, IPT_KEYPAD) PORT_NAME("5 / Queen") PORT_CODE(KEYCODE_5) PORT_CODE(KEYCODE_5_PAD) - PORT_START("KEY1_5") - PORT_BIT(0x080, IP_ACTIVE_LOW, IPT_KEYPAD) PORT_NAME("6 / King") PORT_CODE(KEYCODE_6) PORT_CODE(KEYCODE_6_PAD) - PORT_START("KEY1_6") - PORT_BIT(0x080, IP_ACTIVE_LOW, IPT_KEYPAD) PORT_NAME("White") PORT_CODE(KEYCODE_W) - PORT_START("KEY1_7") - PORT_BIT(0x080, IP_ACTIVE_LOW, IPT_KEYPAD) PORT_NAME("Black") PORT_CODE(KEYCODE_B) - - PORT_START("KEY2_0") - PORT_BIT(0x080, IP_ACTIVE_LOW, IPT_KEYPAD) PORT_NAME("CL") PORT_CODE(KEYCODE_DEL) PORT_CODE(KEYCODE_BACKSPACE) - PORT_START("KEY2_1") - PORT_BIT(0x080, IP_ACTIVE_LOW, IPT_KEYPAD) PORT_NAME("ENT") PORT_CODE(KEYCODE_ENTER) PORT_CODE(KEYCODE_ENTER_PAD) - PORT_START("KEY2_2") - PORT_BIT(0x080, IP_ACTIVE_LOW, IPT_KEYPAD) PORT_NAME("BEST") PORT_CODE(KEYCODE_S) - PORT_START("KEY2_3") - PORT_BIT(0x080, IP_ACTIVE_LOW, IPT_KEYPAD) PORT_NAME("INFO") PORT_CODE(KEYCODE_I) - PORT_START("KEY2_4") - PORT_BIT(0x080, IP_ACTIVE_LOW, IPT_KEYPAD) PORT_NAME("MON") PORT_CODE(KEYCODE_N) - PORT_START("KEY2_5") - PORT_BIT(0x080, IP_ACTIVE_LOW, IPT_KEYPAD) PORT_NAME("POS") PORT_CODE(KEYCODE_O) - PORT_START("KEY2_6") - PORT_BIT(0x080, IP_ACTIVE_LOW, IPT_KEYPAD) PORT_NAME("LEV") PORT_CODE(KEYCODE_L) - PORT_START("KEY2_7") - PORT_BIT(0x080, IP_ACTIVE_LOW, IPT_KEYPAD) PORT_NAME("MEM") PORT_CODE(KEYCODE_M) - - PORT_START("RESET") - PORT_BIT(0x01, IP_ACTIVE_HIGH, IPT_KEYPAD) PORT_NAME("RES 1") PORT_CODE(KEYCODE_Z) PORT_CODE(KEYCODE_F1) PORT_CHANGED_MEMBER(DEVICE_SELF, mephisto_state, reset_button, 0) - PORT_BIT(0x02, IP_ACTIVE_HIGH, IPT_KEYPAD) PORT_NAME("RES 2") PORT_CODE(KEYCODE_X) PORT_CODE(KEYCODE_F1) PORT_CHANGED_MEMBER(DEVICE_SELF, mephisto_state, reset_button, 0) -INPUT_PORTS_END - -INPUT_CHANGED_MEMBER(mephisto_state::reset_button) -{ - // RES buttons in serial tied to CPU RESET - if (ioport("RESET")->read() == 3) - { - m_maincpu->pulse_input_line(INPUT_LINE_RESET, attotime::zero); - machine_reset(); - } -} - - - -/****************************************************************************** - Machine Configs -******************************************************************************/ - -void mephisto_state::rebel5(machine_config &config) -{ - /* basic machine hardware */ - M65C02(config, m_maincpu, 9.8304_MHz_XTAL / 2); - m_maincpu->set_addrmap(AS_PROGRAM, &mephisto_state::rebel5_mem); - - TIMER(config, "nmi_timer").configure_periodic(FUNC(mephisto_state::update_nmi_r5), attotime::from_hz(600)); - - HC259(config, m_outlatch); - m_outlatch->q_out_cb<0>().set_output("led100"); - m_outlatch->q_out_cb<1>().set_output("led101"); - m_outlatch->q_out_cb<2>().set_output("led102"); - m_outlatch->q_out_cb<3>().set_output("led103"); - m_outlatch->q_out_cb<4>().set_output("led104"); - m_outlatch->q_out_cb<5>().set_output("led105"); - m_outlatch->q_out_cb<6>().set(m_dac, FUNC(dac_bit_interface::write)); - m_outlatch->q_out_cb<7>().set(FUNC(mephisto_state::write_led7)); - - MEPHISTO_SENSORS_BOARD(config, "board"); - config.set_default_layout(layout_mephisto_mm2); - - /* sound hardware */ - SPEAKER(config, "speaker").front_center(); - DAC_1BIT(config, m_dac).add_route(ALL_OUTPUTS, "speaker", 0.25); - VOLTAGE_REGULATOR(config, "vref").add_route(0, "dac", 1.0, DAC_VREF_POS_INPUT); -} - -void mephisto_state::mm5p(machine_config &config) -{ - rebel5(config); - - /* basic machine hardware */ - m_maincpu->set_clock(4.9152_MHz_XTAL); - m_maincpu->set_addrmap(AS_PROGRAM, &mephisto_state::mm5p_mem); - - TIMER(config.replace(), "nmi_timer").configure_periodic(FUNC(mephisto_state::update_nmi), attotime::from_hz(600)); -} - -void mephisto_state::mm4(machine_config &config) -{ - mm5p(config); - - /* basic machine hardware */ - m_maincpu->set_addrmap(AS_PROGRAM, &mephisto_state::mm4_mem); - - GENERIC_CARTSLOT(config, "cartslot", generic_plain_slot, "mephisto_cart"); - SOFTWARE_LIST(config, "cart_list").set_original("mephisto_mm4"); -} - -void mephisto_state::mm4tk(machine_config &config) -{ - mm4(config); - m_maincpu->set_clock(18000000); -} - -void mephisto_state::mm5(machine_config &config) -{ - mm4(config); - SOFTWARE_LIST(config.replace(), "cart_list").set_original("mephisto_mm5"); -} - -void mephisto_state::bup(machine_config &config) -{ - rebel5(config); - - /* basic machine hardware */ - m_maincpu->set_clock(7.3728_MHz_XTAL / 2); - m_maincpu->set_addrmap(AS_PROGRAM, &mephisto_state::bup_mem); - - config.device_remove("nmi_timer"); - const attotime irq_period = attotime::from_hz(7.3728_MHz_XTAL / 2 / 0x2000); // 450Hz from 4020 Q13 - m_maincpu->set_periodic_int(FUNC(mephisto_state::irq0_line_assert), irq_period); - - m_outlatch->q_out_cb<7>().set(FUNC(mephisto_state::write_led7)).invert(); - - config.set_default_layout(layout_mephisto_bup); -} - -void mephisto_state::mm2(machine_config &config) -{ - bup(config); - - /* basic machine hardware */ - m_maincpu->set_addrmap(AS_PROGRAM, &mephisto_state::mm2_mem); - - config.set_default_layout(layout_mephisto_mm2); - - GENERIC_CARTSLOT(config, "cartslot", generic_plain_slot, "mephisto_cart"); - SOFTWARE_LIST(config, "cart_list").set_original("mephisto_mm2"); -} - - - -/****************************************************************************** - ROM Definitions -******************************************************************************/ - -ROM_START( rebel5 ) - ROM_REGION( 0x10000, "maincpu", 0 ) - ROM_DEFAULT_BIOS("v2") - - ROM_SYSTEM_BIOS( 0, "v1", "V1" ) - ROMX_LOAD("rebell_5.12.86", 0x8000, 0x8000, CRC(8d02e1ef) SHA1(9972c75936613bd68cfd3fe62bd222e90e8b1083), ROM_BIOS(0) ) - ROM_SYSTEM_BIOS( 1, "v2", "V2" ) - ROMX_LOAD("rebel5_v2.rom", 0x8000, 0x8000, CRC(17232752) SHA1(3cd6893c0071f3dc02785bf99f1950eed81eba39), ROM_BIOS(1) ) -ROM_END - -ROM_START( mm2 ) - ROM_REGION( 0x10000, "maincpu", 0 ) - ROM_DEFAULT_BIOS("v41") // no official versioning, chronological order is assumed here from hex compare - - ROM_SYSTEM_BIOS( 0, "v1", "V1 (2 EPROMs)" ) - ROMX_LOAD("mm2_v1_1.bin", 0x8000, 0x4000, CRC(b91dab77) SHA1(67762304afe51fb8f1eb91259567b2451bf9bbfd), ROM_BIOS(0) ) - ROMX_LOAD("mm2_v1_2.bin", 0xc000, 0x4000, CRC(01143cc1) SHA1(f78474b410dbecb209aa23ef81e9f894e8b54942), ROM_BIOS(0) ) - ROM_SYSTEM_BIOS( 1, "v2", "V2 (2 EPROMs)" ) - ROMX_LOAD("mm2_v2_1.bin", 0x8000, 0x4000, CRC(e2daac82) SHA1(c9fa59ca92362f8ee770733073bfa2ab8c7904ad), ROM_BIOS(1) ) - ROMX_LOAD("mm2_v2_2.bin", 0xc000, 0x4000, CRC(5e296939) SHA1(badd2a377259cf738cd076d8fb245c3dc284c24d), ROM_BIOS(1) ) - ROM_SYSTEM_BIOS( 2, "v3", "V3 (1 EPROM)" ) - ROMX_LOAD("300", 0x8000, 0x8000, CRC(60c777d4) SHA1(a77d678be60094073275558b4e8f0d34b43dd9ae), ROM_BIOS(2) ) // D27C256D-20 - ROM_SYSTEM_BIOS( 3, "v41", "V4 (1 EPROM)" ) // v41 and v42 are binary identical - ROMX_LOAD("400", 0x8000, 0x8000, CRC(e8c1f431) SHA1(c32dfa66eefbf3e539438d2fe6e6916f78a128be), ROM_BIOS(3) ) // HN27C256G-20 - ROM_SYSTEM_BIOS( 4, "v42", "V4 (2 EPROMs)" ) - ROMX_LOAD("mm2_v4_1.bin", 0x8000, 0x4000, CRC(e9adcb8f) SHA1(498f48f96678f7bf429fd43e4f392ec6dd649fc6), ROM_BIOS(4) ) - ROMX_LOAD("mm2_v4_2.bin", 0xc000, 0x4000, CRC(d40cbfc2) SHA1(4e9b19b1a0ad97868b31d7a55143a1778110cc96), ROM_BIOS(4) ) -ROM_END - -ROM_START( bup ) - ROM_REGION( 0x10000, "maincpu", 0 ) - ROM_DEFAULT_BIOS("v2") - - ROM_SYSTEM_BIOS( 0, "v1", "V1" ) - ROMX_LOAD("bup_v1_1.bin", 0x8000, 0x4000, CRC(e1e9625a) SHA1(8a757e28b7afca2a092f8ff419087e06b07b743e), ROM_BIOS(0) ) - ROMX_LOAD("bup_v1_2.bin", 0xc000, 0x4000, CRC(708338ea) SHA1(d617c4aa2161865a22b4b0646ba793f8a1fda863), ROM_BIOS(0) ) - ROM_SYSTEM_BIOS( 1, "v2", "V2" ) - ROMX_LOAD("bup_v2_1.bin", 0x8000, 0x4000, CRC(e1e9625a) SHA1(8a757e28b7afca2a092f8ff419087e06b07b743e), ROM_BIOS(1) ) - ROMX_LOAD("bup_v2_2.bin", 0xc000, 0x4000, CRC(6db30b80) SHA1(df4b379c4e916dff6b4110ec9c3591a9620c3424), ROM_BIOS(1) ) -ROM_END - -ROM_START( mm4 ) - ROM_REGION( 0x10000, "maincpu", 0 ) - ROM_DEFAULT_BIOS("v3") - - ROM_SYSTEM_BIOS( 0, "v1", "V1" ) - ROMX_LOAD("600", 0x8000, 0x8000, CRC(837d49b9) SHA1(9fb2dfaaeca2559ce582211137635c069180e95f), ROM_BIOS(0) ) - ROM_SYSTEM_BIOS( 1, "v2", "V2" ) - ROMX_LOAD("700", 0x8000, 0x8000, CRC(c97da840) SHA1(10bd2a391338ed2e417b35dcb6396ab4a4e360f0), ROM_BIOS(1) ) - ROM_SYSTEM_BIOS( 2, "v3", "V3" ) - ROMX_LOAD("710", 0x8000, 0x8000, CRC(f68a4124) SHA1(d1d03a9aacc291d5cb720d2ee2a209eeba13a36c), ROM_BIOS(2) ) -ROM_END - -ROM_START( mm4tk ) - ROM_REGION( 0x10000, "maincpu", 0 ) - ROM_LOAD("mm4tk.rom", 0x8000, 0x8000, CRC(51cb36a4) SHA1(9e184b4e85bb721e794b88d8657ae8d2ff5a24af) ) -ROM_END - -ROM_START( mm5 ) - ROM_REGION( 0x10000, "maincpu", 0 ) - ROM_DEFAULT_BIOS("v2") - - ROM_SYSTEM_BIOS( 0, "v1", "V1" ) - ROMX_LOAD("mm50.rom", 0x8000, 0x8000, CRC(fcfa7e6e) SHA1(afeac3a8c957ba58cefaa27b11df974f6f2066da), ROM_BIOS(0) ) - ROM_SYSTEM_BIOS( 1, "v2", "V2" ) - ROMX_LOAD("mephisto5.rom", 0x8000, 0x8000, CRC(89c3d9d2) SHA1(77cd6f8eeb03c713249db140d2541e3264328048), ROM_BIOS(1) ) -ROM_END - -ROM_START( mm5p ) - ROM_REGION( 0x10000,"maincpu", 0 ) - ROM_LOAD("buch.bin", 0x0000, 0x8000, CRC(534607c7) SHA1(d0347a5f8dc4cf6001f649aa13e7a7fe75bec5b9) ) // 1st half empty - ROM_LOAD("programm.bin", 0x8000, 0x8000, CRC(ee22b974) SHA1(37267507be30ee84051bc94c3a63fb1298a00261) ) -ROM_END - - - -/****************************************************************************** - Drivers -******************************************************************************/ - -/* YEAR NAME PARENT COMPAT MACHINE INPUT CLASS INIT COMPANY, FULLNAME, FLAGS */ -CONS( 1984, mm2, 0, 0, mm2, mephisto, mephisto_state, empty_init, "Hegener + Glaser", "Mephisto MM II", MACHINE_SUPPORTS_SAVE | MACHINE_CLICKABLE_ARTWORK ) -CONS( 1985, bup, 0, 0, bup, bup, mephisto_state, empty_init, "Hegener + Glaser", "Mephisto Blitz- und Problemloesungs-Modul", MACHINE_SUPPORTS_SAVE | MACHINE_CLICKABLE_ARTWORK ) -CONS( 1986, rebel5, 0, 0, rebel5, mephisto, mephisto_state, empty_init, "Hegener + Glaser", "Mephisto Rebell 5,0", MACHINE_SUPPORTS_SAVE | MACHINE_CLICKABLE_ARTWORK ) -CONS( 1987, mm4, 0, 0, mm4, mephisto, mephisto_state, empty_init, "Hegener + Glaser", "Mephisto MM IV", MACHINE_SUPPORTS_SAVE | MACHINE_CLICKABLE_ARTWORK ) -CONS( 1987, mm4tk, mm4, 0, mm4tk, mephisto, mephisto_state, empty_init, "hack", "Mephisto MM IV (TurboKit)", MACHINE_SUPPORTS_SAVE | MACHINE_CLICKABLE_ARTWORK | MACHINE_IMPERFECT_TIMING ) -CONS( 1990, mm5, 0, 0, mm5, mephisto, mephisto_state, empty_init, "Hegener + Glaser", "Mephisto MM V", MACHINE_SUPPORTS_SAVE | MACHINE_CLICKABLE_ARTWORK ) -CONS( 1989, mm5p, mm5, 0, mm5p, mephisto, mephisto_state, empty_init, "Hegener + Glaser", "Mephisto MM V (prototype)", MACHINE_SUPPORTS_SAVE | MACHINE_CLICKABLE_ARTWORK | MACHINE_IMPERFECT_TIMING ) |