diff options
Diffstat (limited to 'src/mame/drivers/feversoc.cpp')
-rw-r--r-- | src/mame/drivers/feversoc.cpp | 357 |
1 files changed, 0 insertions, 357 deletions
diff --git a/src/mame/drivers/feversoc.cpp b/src/mame/drivers/feversoc.cpp deleted file mode 100644 index a570be10869..00000000000 --- a/src/mame/drivers/feversoc.cpp +++ /dev/null @@ -1,357 +0,0 @@ -// license:BSD-3-Clause -// copyright-holders:Angelo Salese, Nicola Salmoria -/******************************************************************************************* - -Fever Soccer (c) 2004 Seibu Kaihatsu - -A down-grade of the Seibu SPI Hardware with SH-2 as main cpu. - -driver by Angelo Salese & Nicola Salmoria - -The input routines are very convoluted in comparison to previous Seibu games, -looping over a complex control structure. Could these be derived from the -"Touch Panel System" DVD mahjong games Seibu released under the CATS label? - -TODO: -- Layout including lamps -- Hopper only works in "COIN HOPPER" mode -- Do button 5 or remaining DIPs actually do anything outside service mode? - -============================================================================ - -Fever Soccer (JAMMA based Gambling Game) - -Seibu Kaihatsu Inc. - -PCB (c) 2004 SYS_SH2B + SYS_SH2B Rom Board - -Very simple PCB contains: - - CPU: Hitachi SH-2 (HD6417604F28) - Audio: OKI 6295 (rebadged as AD-65) -GFX CHIP: RISE11 (custom graphics chip with programmable decryption) - EEPROM: ST93C56A - OSC: 28.63636MHz - DSW: Single 4 switch - -Other: Battery (CR2032) - Sigma XLINX 9572 - JRC 6355E Serial Real Time Clock (connected to a 32.768KHz OSC) - -RAM: BSI BS62LV1024SC-70 (x2) - EtronTech EM51256C-15J (x4) - - -PRG0.U0139 ST M27C1001 (PCB can handle up to 27C080) -PRG1.U0140 ST M27C1001 - -PCM.U0743 ST M27C4001 - -On the SYS_SH2B ROM BOARD: -OBJ1.U011 ST M27C160 -OBJ2.U012 ST M27C160 -OBJ3.U013 ST M27C160 - -Not used / unpopulated: - -U0145 LH28F800SU (Alt program ROM near SH-2) - -U0744 LH28F800SU (Alt PCM ROM near AD-65) - -U0561 LH28F800SU OBJ1-1 (near ROM BOARD connector & RISE11 chip) -U0562 LH28F800SU OBJ2-1 -U0563 LH28F800SU OBJ3-1 -U0564 LH28F800SU OBJ4-1 - -*******************************************************************************************/ - -#include "emu.h" -#include "cpu/sh/sh2.h" -#include "machine/seibuspi.h" -#include "sound/okim6295.h" -#include "machine/eepromser.h" -#include "machine/rtc4543.h" -#include "machine/nvram.h" -#include "machine/ticket.h" -#include "emupal.h" -#include "screen.h" -#include "speaker.h" - - -class feversoc_state : public driver_device -{ -public: - feversoc_state(const machine_config &mconfig, device_type type, const char *tag) : - driver_device(mconfig, type, tag), - m_mainram1(*this, "workram1"), - m_mainram2(*this, "workram2"), - m_nvram(*this, "nvram"), - m_spriteram(*this, "spriteram"), - m_in(*this, {"IN1", "IN0"}), - m_lamps(*this, "lamp%u", 1U), - m_maincpu(*this, "maincpu"), - m_oki(*this, "oki"), - m_eeprom(*this, "eeprom"), - m_rtc(*this, "rtc"), - m_hopper(*this, "hopper"), - m_gfxdecode(*this, "gfxdecode"), - m_palette(*this, "palette") - { } - - void init_feversoc(); - void feversoc(machine_config &config); - -private: - DECLARE_READ16_MEMBER(in_r); - DECLARE_WRITE16_MEMBER(output_w); - DECLARE_WRITE16_MEMBER(output2_w); - void feversoc_map(address_map &map); - uint32_t screen_update_feversoc(screen_device &screen, bitmap_ind16 &bitmap, const rectangle &cliprect); - DECLARE_WRITE_LINE_MEMBER(feversoc_irq); - DECLARE_WRITE16_MEMBER(feversoc_irq_ack); - virtual void machine_start() override; - - required_shared_ptr<uint32_t> m_mainram1; - required_shared_ptr<uint32_t> m_mainram2; - required_shared_ptr<uint32_t> m_nvram; - required_shared_ptr<uint32_t> m_spriteram; - required_ioport_array<2> m_in; - output_finder<7> m_lamps; - - required_device<sh2_device> m_maincpu; - required_device<okim6295_device> m_oki; - required_device<eeprom_serial_93cxx_device> m_eeprom; - required_device<jrc6355e_device> m_rtc; - required_device<ticket_dispenser_device> m_hopper; - required_device<gfxdecode_device> m_gfxdecode; - required_device<palette_device> m_palette; -}; - - -#define MASTER_CLOCK XTAL(28'636'363) - - -uint32_t feversoc_state::screen_update_feversoc(screen_device &screen, bitmap_ind16 &bitmap, const rectangle &cliprect) -{ - uint32_t *spriteram32 = m_spriteram; - int offs,spr_offs,colour,sx,sy,h,w,dx,dy; - - bitmap.fill(m_palette->pen(0), cliprect); //black pen - - for(offs=(0x2000/4)-2;offs>-1;offs-=2) - { - spr_offs = (spriteram32[offs+0] & 0x3fff); - if(spr_offs == 0) - continue; - sy = (spriteram32[offs+1] & 0x01ff); - sx = (spriteram32[offs+1] & 0x01ff0000)>>16; - colour = (spriteram32[offs+0] & 0x003f0000)>>16; - w = ((spriteram32[offs+0] & 0x07000000)>>24)+1; - h = ((spriteram32[offs+0] & 0x70000000)>>28)+1; - - if( sy & 0x100) - sy-=0x200; - - for(dx=0;dx<w;dx++) - for(dy=0;dy<h;dy++) - m_gfxdecode->gfx(0)->transpen(bitmap,cliprect,spr_offs++,colour,0,0,(sx+dx*16),(sy+dy*16),0x3f); - } - - return 0; -} - - - -READ16_MEMBER(feversoc_state::in_r) -{ - return m_in[offset]->read() & 0xffff; -} - -WRITE16_MEMBER( feversoc_state::output_w ) -{ - machine().bookkeeping().coin_lockout_w(0, ~data & 0x40); - machine().bookkeeping().coin_lockout_w(1, ~data & 0x40); - machine().bookkeeping().coin_counter_w(0, data & 1); - // data & 2 coin out counter - machine().bookkeeping().coin_counter_w(1, data & 4); - m_hopper->motor_w((data & 0x08) >> 3); // coin hopper or prize hopper - m_oki->set_rom_bank((data & 0x20) >> 5); - - m_eeprom->di_write((data & 0x8000) ? 1 : 0); - m_eeprom->clk_write((data & 0x4000) ? ASSERT_LINE : CLEAR_LINE); - m_eeprom->cs_write((data & 0x2000) ? ASSERT_LINE : CLEAR_LINE); - - m_rtc->data_w((data & 0x0800) ? 1 : 0); - m_rtc->wr_w((data & 0x0400) ? ASSERT_LINE : CLEAR_LINE); - m_rtc->clk_w((data & 0x0200) ? ASSERT_LINE : CLEAR_LINE); - m_rtc->ce_w((data & 0x0100) ? ASSERT_LINE : CLEAR_LINE); -} - -WRITE16_MEMBER( feversoc_state::output2_w ) -{ - for (int n = 0; n < 7; n++) - m_lamps[n] = BIT(data, n); // LAMP1-LAMP7 - - machine().bookkeeping().coin_counter_w(2, data & 0x2000); // key in - //data & 0x4000 key out -} - - -void feversoc_state::feversoc_map(address_map &map) -{ - map(0x00000000, 0x0003ffff).rom(); - map(0x02000000, 0x0202ffff).ram().share("workram1"); //work ram - map(0x02030000, 0x02033fff).ram().share("nvram"); - map(0x02034000, 0x0203dfff).ram().share("workram2"); //work ram - map(0x0203e000, 0x0203ffff).ram().share("spriteram"); - map(0x06000000, 0x06000001).w(FUNC(feversoc_state::output_w)); - map(0x06000002, 0x06000003).w(FUNC(feversoc_state::output2_w)); - map(0x06000006, 0x06000007).w(FUNC(feversoc_state::feversoc_irq_ack)); - map(0x06000008, 0x0600000b).r(FUNC(feversoc_state::in_r)); - map(0x0600000d, 0x0600000d).rw(m_oki, FUNC(okim6295_device::read), FUNC(okim6295_device::write)); - //map(0x06010000, 0x0601007f).rw("obj", FUNC(seibu_encrypted_sprite_device::read), FUNC(seibu_encrypted_sprite_device::write)); - map(0x06010060, 0x06010063).nopw(); // sprite buffering - map(0x06018000, 0x06019fff).ram().w(m_palette, FUNC(palette_device::write32)).share("palette"); -} - -static const gfx_layout spi_spritelayout = -{ - 16,16, - RGN_FRAC(1,3), - 6, - { RGN_FRAC(0,3)+0,RGN_FRAC(0,3)+8,RGN_FRAC(1,3)+0,RGN_FRAC(1,3)+8,RGN_FRAC(2,3)+0,RGN_FRAC(2,3)+8 }, - { - 7,6,5,4,3,2,1,0,23,22,21,20,19,18,17,16 - }, - { - 0*32,1*32,2*32,3*32,4*32,5*32,6*32,7*32,8*32,9*32,10*32,11*32,12*32,13*32,14*32,15*32 - }, - 16*32 -}; - - -static GFXDECODE_START( gfx_feversoc ) - GFXDECODE_ENTRY( "gfx1", 0, spi_spritelayout, 0, 0x40 ) -GFXDECODE_END - -static INPUT_PORTS_START( feversoc ) - // The "ANALIZE" input shown in test mode does not exist on this hardware. - PORT_START("IN0") - PORT_BIT( 0x0001, IP_ACTIVE_LOW, IPT_START1 ) - PORT_BIT( 0x0002, IP_ACTIVE_LOW, IPT_COIN2 ) - PORT_BIT( 0x0004, IP_ACTIVE_LOW, IPT_SERVICE ) - PORT_BIT( 0x0008, IP_ACTIVE_LOW, IPT_GAMBLE_KEYIN ) PORT_NAME("Key In (Service)") - PORT_BIT( 0x0010, IP_ACTIVE_LOW, IPT_COIN1 ) - PORT_BIT( 0x0020, IP_ACTIVE_HIGH, IPT_CUSTOM ) PORT_READ_LINE_DEVICE_MEMBER("hopper", ticket_dispenser_device, line_r) - PORT_BIT( 0x0040, IP_ACTIVE_HIGH, IPT_CUSTOM ) PORT_READ_LINE_DEVICE_MEMBER("eeprom", eeprom_serial_93cxx_device, do_read) - PORT_BIT( 0x0080, IP_ACTIVE_HIGH, IPT_CUSTOM ) PORT_READ_LINE_DEVICE_MEMBER("rtc", rtc4543_device, data_r) - PORT_DIPNAME( 0x0100, 0x0100, DEF_STR( Service_Mode ) ) PORT_DIPLOCATION( "DIP1:1" ) - PORT_DIPSETTING( 0x0100, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x0000, DEF_STR( On ) ) - PORT_DIPUNKNOWN_DIPLOC( 0x0200, 0x0200, "DIP1:2" ) - PORT_DIPNAME( 0x0400, 0x0400, "Backup Memory" ) PORT_DIPLOCATION( "DIP1:3" ) - PORT_DIPSETTING( 0x0400, "Use" ) - PORT_DIPSETTING( 0x0000, "Reset" ) - PORT_DIPUNKNOWN_DIPLOC( 0x0800, 0x0800, "DIP1:4" ) - PORT_DIPUNKNOWN_DIPLOC( 0x1000, 0x1000, "DIP1:5" ) - PORT_DIPUNKNOWN_DIPLOC( 0x2000, 0x2000, "DIP1:6" ) - PORT_DIPUNKNOWN_DIPLOC( 0x4000, 0x4000, "DIP1:7" ) - PORT_DIPUNKNOWN_DIPLOC( 0x8000, 0x8000, "DIP1:8" ) - - PORT_START("IN1") - PORT_BIT( 0x0001, IP_ACTIVE_LOW, IPT_SLOT_STOP1 ) PORT_NAME("Stop 1 (BTN1)") - PORT_BIT( 0x0002, IP_ACTIVE_LOW, IPT_SLOT_STOP2 ) PORT_NAME("Stop 2 (BTN2)") - PORT_BIT( 0x0004, IP_ACTIVE_LOW, IPT_SLOT_STOP3 ) PORT_NAME("Stop 3 (BTN3)") - PORT_BIT( 0x0008, IP_ACTIVE_LOW, IPT_GAMBLE_BET ) PORT_NAME("Bet (BTN4)") - PORT_BIT( 0x0010, IP_ACTIVE_LOW, IPT_OTHER ) PORT_NAME("Unknown (BTN5)") PORT_CODE(KEYCODE_J) - PORT_BIT( 0x0020, IP_ACTIVE_LOW, IPT_GAMBLE_KEYOUT ) PORT_NAME("Key Out (BTN6)") - PORT_BIT( 0x0040, IP_ACTIVE_LOW, IPT_GAMBLE_PAYOUT ) PORT_NAME("Coin Out (BTN7)") - PORT_BIT( 0x0080, IP_ACTIVE_LOW, IPT_MEMORY_RESET ) - PORT_BIT( 0xff00, IP_ACTIVE_LOW, IPT_UNUSED ) -INPUT_PORTS_END - -WRITE_LINE_MEMBER(feversoc_state::feversoc_irq) -{ - if (state) - m_maincpu->set_input_line(8, ASSERT_LINE); -} - -WRITE16_MEMBER(feversoc_state::feversoc_irq_ack) -{ - m_maincpu->set_input_line(8, CLEAR_LINE); -} - -void feversoc_state::machine_start() -{ - m_lamps.resolve(); -} - -void feversoc_state::feversoc(machine_config &config) -{ - /* basic machine hardware */ - SH2(config, m_maincpu, MASTER_CLOCK); - m_maincpu->set_addrmap(AS_PROGRAM, &feversoc_state::feversoc_map); - - /* video hardware */ - screen_device &screen(SCREEN(config, "screen", SCREEN_TYPE_RASTER)); - screen.set_refresh_hz(60); - screen.set_vblank_time(ATTOSECONDS_IN_USEC(0)); - screen.set_size(40*8, 32*8); - screen.set_visarea(0*8, 40*8-1, 0*8, 30*8-1); //dynamic resolution? - screen.set_screen_update(FUNC(feversoc_state::screen_update_feversoc)); - screen.set_palette(m_palette); - screen.screen_vblank().set(FUNC(feversoc_state::feversoc_irq)); - - GFXDECODE(config, m_gfxdecode, m_palette, gfx_feversoc); - PALETTE(config, m_palette).set_format(palette_device::xBGR_555, 0x1000); - - /* sound hardware */ - SPEAKER(config, "mono").front_center(); - OKIM6295(config, m_oki, MASTER_CLOCK/16, okim6295_device::PIN7_LOW).add_route(ALL_OUTPUTS, "mono", 0.6); //pin 7 & frequency not verified (clock should be 28,6363 / n) - - EEPROM_93C56_16BIT(config, "eeprom"); - - JRC6355E(config, m_rtc, XTAL(32'768)); - - NVRAM(config, "nvram", nvram_device::DEFAULT_ALL_0); - - TICKET_DISPENSER(config, m_hopper, attotime::from_msec(60), TICKET_MOTOR_ACTIVE_HIGH, TICKET_STATUS_ACTIVE_HIGH); -} - -/*************************************************************************** - - Game driver(s) - -***************************************************************************/ - -// Date of build, as displayed in service mode, is Apr 30 2004/22:44:21. -// Program ROMs also contain leftover strings and tables from a previous build dated Apr 26 2004/20:25:31. -ROM_START( feversoc ) - ROM_REGION32_BE( 0x40000, "maincpu", 0 ) - ROM_LOAD16_BYTE( "prog0.u0139", 0x00001, 0x20000, CRC(fa699503) SHA1(96a834d4f7d5b764aa51db745afc2cd9a7c9783d) ) - ROM_LOAD16_BYTE( "prog1.u0140", 0x00000, 0x20000, CRC(fd4d7943) SHA1(d7d782f878656bc79d70589f9df2cbcfff0adb5e) ) - - ROM_REGION( 0x600000, "gfx1", 0) /* text */ - ROM_LOAD("obj1.u011", 0x000000, 0x200000, CRC(d8c8dde7) SHA1(3ef815fb1e21a0bd907ee835bc7a32d80f6a9d28) ) - ROM_LOAD("obj2.u012", 0x200000, 0x200000, CRC(8e93bfda) SHA1(3b4740cefb164efc320fb69f58e8800d2646fea6) ) - ROM_LOAD("obj3.u013", 0x400000, 0x200000, CRC(8c8c6e8b) SHA1(bed4990d6eebb7aefa200ad2bed9b7e71e6bd064) ) - - ROM_REGION( 0x80000, "oki", 0 ) - ROM_LOAD( "pcm.u0743", 0x00000, 0x80000, CRC(20b0c0e3) SHA1(dcf2f620a8fe695688057dbaf5c431a32a832440) ) -ROM_END - -void feversoc_state::init_feversoc() -{ - uint32_t *rom = (uint32_t *)memregion("maincpu")->base(); - - seibuspi_rise11_sprite_decrypt_feversoc(memregion("gfx1")->base(), 0x200000); - - m_maincpu->sh2drc_set_options(SH2DRC_FASTEST_OPTIONS); - m_maincpu->sh2drc_add_fastram(0x00000000, 0x0003ffff, 1, rom); - m_maincpu->sh2drc_add_fastram(0x02000000, 0x0202ffff, 0, &m_mainram1[0]); - m_maincpu->sh2drc_add_fastram(0x02030000, 0x02033fff, 0, &m_nvram[0]); - m_maincpu->sh2drc_add_fastram(0x02034000, 0x0203dfff, 0, &m_mainram2[0]); - m_maincpu->sh2drc_add_fastram(0x0203e000, 0x0203ffff, 0, &m_spriteram[0]); -} - -GAME( 2004, feversoc, 0, feversoc, feversoc, feversoc_state, init_feversoc, ROT0, "Seibu Kaihatsu", "Fever Soccer", 0 ) |