summaryrefslogtreecommitdiffstatshomepage
path: root/src/mame/drivers/epos.cpp
diff options
context:
space:
mode:
Diffstat (limited to 'src/mame/drivers/epos.cpp')
-rw-r--r--src/mame/drivers/epos.cpp862
1 files changed, 0 insertions, 862 deletions
diff --git a/src/mame/drivers/epos.cpp b/src/mame/drivers/epos.cpp
deleted file mode 100644
index 783c06b6e31..00000000000
--- a/src/mame/drivers/epos.cpp
+++ /dev/null
@@ -1,862 +0,0 @@
-// license:BSD-3-Clause
-// copyright-holders:Zsolt Vasvari
-/***************************************************************************
-
- Epos games
-
- driver by Zsolt Vasvari
-
-
- Notes:
-
- - To walk in IGMO, hold down button 2.
- - Super Glob seems like a later revision of The Glob, the most obvious
- difference being an updated service mode.
- - These games don't have cocktail mode.
- - The CPU clock divisor 4 was derived using the timing loop used to split
- the screen in the middle. This loop takes roughly 24200 cycles, giving
- 2500 + (24200 - 2500) * 2 * 60 = 2754000 = 2.75MHz for the CPU speed,
- assuming 60 fps and a 2500 cycle VBLANK period.
- This also matches the IGMO schematic, as it is the /CLK signal, which is
- derived from the 11MHz xtal by dividing it down by two 74LS193 chips, one
- (U92) dividing the clock by 2, and another (U91) having 3 taps, further
- dividing the already divided clock by 2 (/CLK), 4 (/PLOAD) and 8 (CLOCK).
- The CLOCK signal drives the AY.
- - I think theglob2 is earlier than theglob. They only differ in one routine,
- but it appears to be a bug fix. Also, theglob3 appears to be even older.
-
- To Do:
-
- - Super Blob uses a busy loop during the color test to split the screen
- between the two palettes. This effect is not emulated, but since both
- halves of the palette are identical, this is not an issue. See $039c.
- The other games have a different color test, not using the busy loop.
-
- - dealer/beastf/revngr84: "PSG registers not OK" in service mode thru
- sound menu, internal ay8910 not right?
-
-***************************************************************************/
-
-#include "emu.h"
-#include "includes/epos.h"
-
-#include "cpu/z80/z80.h"
-#include "machine/i8255.h"
-#include "machine/watchdog.h"
-#include "machine/nvram.h"
-#include "sound/ay8910.h"
-#include "screen.h"
-#include "speaker.h"
-
-
-void epos_state::dealer_decrypt_rom(offs_t offset, uint8_t data)
-{
- if (offset & 0x04)
- m_counter = (m_counter + 1) & 0x03;
- else
- m_counter = (m_counter - 1) & 0x03;
-
- //logerror("PC %08x: ctr=%04x\n",m_maincpu->pc(), m_counter);
-
- membank("bank1")->set_entry(m_counter);
-
- // is the 2nd bank changed by the counter or it always uses the 1st key?
-}
-
-
-/*************************************
- *
- * Main CPU memory handlers
- *
- *************************************/
-
-void epos_state::epos_map(address_map &map)
-{
- map(0x0000, 0x77ff).rom();
- map(0x7800, 0x7fff).ram();
- map(0x8000, 0xffff).ram().share("videoram");
-}
-
-void epos_state::dealer_map(address_map &map)
-{
- map(0x0000, 0x5fff).bankr("bank1");
- map(0x6000, 0x6fff).bankr("bank2");
- map(0x7000, 0x7fff).ram().share("nvram");
- map(0x8000, 0xffff).ram().share("videoram");
-}
-
-
-/*************************************
- *
- * Main CPU port handlers
- *
- *************************************/
-
-void epos_state::epos_io_map(address_map &map)
-{
- map.global_mask(0xff);
- map(0x00, 0x00).portr("DSW").w("watchdog", FUNC(watchdog_timer_device::reset_w));
- map(0x01, 0x01).portr("SYSTEM").w(FUNC(epos_state::port_1_w));
- map(0x02, 0x02).portr("INPUTS").w("aysnd", FUNC(ay8910_device::data_w));
- map(0x03, 0x03).portr("UNK");
- map(0x06, 0x06).w("aysnd", FUNC(ay8910_device::address_w));
-}
-
-void epos_state::dealer_io_map(address_map &map)
-{
- map.global_mask(0xff);
- map(0x00, 0x0f).w(FUNC(epos_state::dealer_pal_w));
- map(0x10, 0x13).rw("ppi8255", FUNC(i8255_device::read), FUNC(i8255_device::write));
- map(0x20, 0x24).w(FUNC(epos_state::dealer_decrypt_rom));
- map(0x34, 0x34).w("aysnd", FUNC(ay8910_device::data_w));
- map(0x38, 0x38).r("aysnd", FUNC(ay8910_device::data_r));
- map(0x3c, 0x3c).w("aysnd", FUNC(ay8910_device::address_w));
- map(0x40, 0x40).w("watchdog", FUNC(watchdog_timer_device::reset_w));
-}
-
-uint8_t epos_state::i8255_porta_r()
-{
- uint8_t data = 0xff;
-
- if (!BIT(m_input_multiplex, 0))
- data &= m_inputs[0]->read();
-
- if (!BIT(m_input_multiplex, 1))
- data &= m_inputs[1]->read();
-
- return data;
-}
-
-/*
- ROMs U01-U03 are checked with the same code in a loop.
- There's a separate ROM check for banked U04 at 30F3.
- It looks like dealer/revenger uses ppi8255 to control bankswitching.
-*/
-void epos_state::i8255_portc_w(uint8_t data)
-{
- membank("bank2")->set_entry(data & 0x01);
- m_input_multiplex = (data >> 5) & 3;
-}
-
-uint8_t epos_state::ay_porta_mpx_r()
-{
- return (m_ay_porta_multiplex ? 0xFF : ioport("DSW")->read());
-}
-
-void epos_state::flip_screen_w(uint8_t data)
-{
- flip_screen_set(BIT(data, 7));
- // bit 6: ay8910 port A/B multiplexer read
- m_ay_porta_multiplex = BIT(data, 6);
-}
-
-
-/*************************************
- *
- * Port definitions
- *
- *************************************/
-
-/* I think the upper two bits of port 1 are used as a simple form of protection,
- so that ROMs couldn't be simply swapped. Each game checks these bits and halts
- the processor if an unexpected value is read. */
-
-static INPUT_PORTS_START( megadon )
- // There are odd port mappings (old=new)
- // 02=10, 04=40, 08=02, 10=20, 20=04, 40=08
- PORT_START("DSW")
- PORT_DIPNAME( 0x01, 0x00, DEF_STR( Coinage ) ) PORT_DIPLOCATION("SW1:1")
- PORT_DIPSETTING( 0x00, DEF_STR( 1C_1C ) )
- PORT_DIPSETTING( 0x01, DEF_STR( 1C_2C ) )
- PORT_DIPNAME( 0x50, 0x00, DEF_STR( Lives ) ) PORT_DIPLOCATION("SW1:2,3")
- PORT_DIPSETTING( 0x00, "3" )
- PORT_DIPSETTING( 0x10, "4" )
- PORT_DIPSETTING( 0x40, "5" )
- PORT_DIPSETTING( 0x50, "6" )
- PORT_DIPNAME( 0x02, 0x00, "Fuel Consumption" ) PORT_DIPLOCATION("SW1:4")
- PORT_DIPSETTING( 0x00, "Slow" )
- PORT_DIPSETTING( 0x02, "Fast" )
- PORT_DIPNAME( 0x20, 0x20, "Enemy Fire Rate" ) PORT_DIPLOCATION("SW1:5")
- PORT_DIPSETTING( 0x20, "Slow" )
- PORT_DIPSETTING( 0x00, "Fast" )
- PORT_DIPNAME( 0x04, 0x00, "Rotation" ) PORT_DIPLOCATION("SW1:6")
- PORT_DIPSETTING( 0x04, "Slow" )
- PORT_DIPSETTING( 0x00, "Fast" )
- PORT_DIPNAME( 0x08, 0x08, "ERG" ) PORT_DIPLOCATION("SW1:7")
- PORT_DIPSETTING( 0x08, DEF_STR( Easy ) )
- PORT_DIPSETTING( 0x00, DEF_STR( Hard ) )
- PORT_DIPNAME( 0x80, 0x00, "Game Mode" ) PORT_DIPLOCATION("SW1:8")
- PORT_DIPSETTING( 0x00, "Arcade" )
- PORT_DIPSETTING( 0x80, "Contest" )
-
- PORT_START("SYSTEM")
- PORT_BIT( 0x01, IP_ACTIVE_HIGH, IPT_COIN1 )
- PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_UNKNOWN )
- PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_START1 )
- PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_START2 )
- PORT_SERVICE_NO_TOGGLE(0x10, IP_ACTIVE_LOW)
- PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_UNKNOWN )
- PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_CUSTOM ) /* this has to be HI */
- PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_CUSTOM ) /* this has to be HI */
-
- PORT_START("INPUTS")
- PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_JOYSTICK_RIGHT )
- PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_JOYSTICK_LEFT )
- PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_BUTTON1 )
- PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_BUTTON2 )
- PORT_BIT( 0xf0, IP_ACTIVE_LOW, IPT_UNKNOWN )
-
- PORT_START("UNK")
- PORT_BIT( 0xff, IP_ACTIVE_HIGH, IPT_UNKNOWN )
-INPUT_PORTS_END
-
-
-static INPUT_PORTS_START( suprglob )
- // There are odd port mappings (old=new)
- // 02=10, 04=40, 08=20, 10=02, 20=04, 40=08
- PORT_START("DSW")
- PORT_DIPNAME( 0x01, 0x00, DEF_STR( Coinage ) ) PORT_DIPLOCATION("SW1:1")
- PORT_DIPSETTING( 0x00, DEF_STR( 1C_1C ) )
- PORT_DIPSETTING( 0x01, DEF_STR( 1C_2C ) )
- PORT_DIPNAME( 0x50, 0x00, DEF_STR( Lives ) ) PORT_DIPLOCATION("SW1:2,3")
- PORT_DIPSETTING( 0x00, "3" )
- PORT_DIPSETTING( 0x10, "4" )
- PORT_DIPSETTING( 0x40, "5" )
- PORT_DIPSETTING( 0x50, "6" )
- PORT_DIPNAME( 0x26, 0x00, DEF_STR( Difficulty ) ) PORT_DIPLOCATION("SW1:4,5,6")
- PORT_DIPSETTING( 0x00, "1" )
- PORT_DIPSETTING( 0x02, "2" )
- PORT_DIPSETTING( 0x20, "3" )
- PORT_DIPSETTING( 0x22, "4" )
- PORT_DIPSETTING( 0x04, "5" )
- PORT_DIPSETTING( 0x06, "6" )
- PORT_DIPSETTING( 0x24, "7" )
- PORT_DIPSETTING( 0x26, "8" )
- PORT_DIPNAME( 0x08, 0x00, DEF_STR( Bonus_Life ) ) PORT_DIPLOCATION("SW1:7")
- PORT_DIPSETTING( 0x00, "10000 + Difficulty * 10000" )
- PORT_DIPSETTING( 0x08, "90000 + Difficulty * 10000" )
- PORT_DIPNAME( 0x80, 0x00, DEF_STR( Demo_Sounds ) ) PORT_DIPLOCATION("SW1:8")
- PORT_DIPSETTING( 0x80, DEF_STR( Off ) )
- PORT_DIPSETTING( 0x00, DEF_STR( On ) )
-
- PORT_START("SYSTEM")
- PORT_BIT( 0x01, IP_ACTIVE_HIGH, IPT_COIN1 )
- PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_UNKNOWN )
- PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_START1 )
- PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_START2 )
- PORT_SERVICE_NO_TOGGLE(0x10, IP_ACTIVE_LOW)
- PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_UNKNOWN )
- PORT_BIT( 0x40, IP_ACTIVE_HIGH, IPT_CUSTOM ) /* this has to be LO */
- PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_CUSTOM ) /* this has to be HI */
-
- PORT_START("INPUTS")
- PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_JOYSTICK_RIGHT )
- PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_JOYSTICK_LEFT )
- PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_BUTTON1 )
- PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_BUTTON2 )
- PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_JOYSTICK_UP )
- PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_JOYSTICK_DOWN )
- PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_UNKNOWN )
- PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_UNKNOWN )
-
- PORT_START("UNK")
- PORT_BIT( 0xff, IP_ACTIVE_HIGH, IPT_UNKNOWN )
-INPUT_PORTS_END
-
-
-static INPUT_PORTS_START( igmo )
- // There are odd port mappings (old=new)
- // 02=10, 04=40, 08=20, 10=02, 20=04, 40=08
- PORT_START("DSW")
- PORT_DIPNAME( 0x01, 0x00, DEF_STR( Coinage ) ) PORT_DIPLOCATION("SW1:1")
- PORT_DIPSETTING( 0x00, DEF_STR( 1C_1C ) )
- PORT_DIPSETTING( 0x01, DEF_STR( 1C_2C ) )
- PORT_DIPNAME( 0x50, 0x00, DEF_STR( Lives ) ) PORT_DIPLOCATION("SW1:2,3")
- PORT_DIPSETTING( 0x00, "3" )
- PORT_DIPSETTING( 0x10, "4" )
- PORT_DIPSETTING( 0x40, "5" )
- PORT_DIPSETTING( 0x50, "6" )
- PORT_DIPNAME( 0x22, 0x00, DEF_STR( Bonus_Life ) ) PORT_DIPLOCATION("SW1:4,5")
- PORT_DIPSETTING( 0x00, "20000" )
- PORT_DIPSETTING( 0x02, "40000" )
- PORT_DIPSETTING( 0x20, "60000" )
- PORT_DIPSETTING( 0x22, "80000" )
- PORT_DIPNAME( 0x8c, 0x00, DEF_STR( Difficulty ) ) PORT_DIPLOCATION("SW1:6,7,8")
- PORT_DIPSETTING( 0x00, "1" )
- PORT_DIPSETTING( 0x04, "2" )
- PORT_DIPSETTING( 0x08, "3" )
- PORT_DIPSETTING( 0x0c, "4" )
- PORT_DIPSETTING( 0x80, "5" )
- PORT_DIPSETTING( 0x84, "6" )
- PORT_DIPSETTING( 0x88, "7" )
- PORT_DIPSETTING( 0x8c, "8" )
-
- PORT_START("SYSTEM")
- PORT_BIT( 0x01, IP_ACTIVE_HIGH, IPT_COIN1 )
- PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_UNKNOWN )
- PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_START1 )
- PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_START2 )
- PORT_SERVICE_NO_TOGGLE(0x10, IP_ACTIVE_LOW)
- PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_UNKNOWN )
- PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_CUSTOM ) /* this has to be HI */
- PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_CUSTOM ) /* this has to be HI */
-
- PORT_START("INPUTS")
- PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_JOYSTICK_RIGHT )
- PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_JOYSTICK_LEFT )
- PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_BUTTON1 )
- PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_BUTTON2 )
- PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_JOYSTICK_UP )
- PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_JOYSTICK_DOWN )
- PORT_BIT( 0xc0, IP_ACTIVE_LOW, IPT_UNKNOWN )
-
- PORT_START("UNK")
- PORT_BIT( 0xff, IP_ACTIVE_HIGH, IPT_UNKNOWN )
-INPUT_PORTS_END
-
-
-static INPUT_PORTS_START( catapult )
- PORT_INCLUDE( igmo )
-
- // There are odd port mappings (old=new)
- // 02=08, 04=20, 08=40, 10=02, 20=10, 40=04
- PORT_MODIFY("DSW")
- PORT_DIPNAME( 0x01, 0x00, DEF_STR( Coinage ) ) PORT_DIPLOCATION("SW1:1")
- PORT_DIPSETTING( 0x00, DEF_STR( 1C_1C ) )
- PORT_DIPSETTING( 0x01, DEF_STR( 1C_2C ) )
- PORT_DIPNAME( 0x50, 0x00, DEF_STR( Lives ) ) PORT_DIPLOCATION("SW1:2,3")
- PORT_DIPSETTING( 0x00, "3" )
- PORT_DIPSETTING( 0x10, "4" )
- PORT_DIPSETTING( 0x40, "5" )
- PORT_DIPSETTING( 0x50, "6" )
- PORT_DIPNAME( 0x22, 0x00, DEF_STR( Difficulty ) ) PORT_DIPLOCATION("SW1:4,5")
- PORT_DIPSETTING( 0x00, "1" )
- PORT_DIPSETTING( 0x02, "2" )
- PORT_DIPSETTING( 0x20, "3" )
- PORT_DIPSETTING( 0x22, "4" )
- PORT_DIPNAME( 0x0c, 0x00, DEF_STR( Bonus_Life ) ) PORT_DIPLOCATION("SW1:6,7")
- PORT_DIPSETTING( 0x00, "20000" )
- PORT_DIPSETTING( 0x04, "40000" )
- PORT_DIPSETTING( 0x08, "60000" )
- PORT_DIPSETTING( 0x0c, "80000" )
- PORT_DIPNAME( 0x80, 0x00, DEF_STR( Demo_Sounds ) ) PORT_DIPLOCATION("SW1:8")
- PORT_DIPSETTING( 0x80, DEF_STR( Off ) )
- PORT_DIPSETTING( 0x00, DEF_STR( On ) )
-INPUT_PORTS_END
-
-
-static INPUT_PORTS_START( eeekk )
- // There are odd port mappings (old=new)
- // 02=10, 04=40, 08=02, 10=20, 20=04, 40=08
- PORT_START("DSW")
- PORT_DIPNAME( 0x01, 0x00, DEF_STR( Coinage ) ) PORT_DIPLOCATION("SW1:1")
- PORT_DIPSETTING( 0x00, DEF_STR( 1C_1C ) )
- PORT_DIPSETTING( 0x01, DEF_STR( 1C_2C ) )
- PORT_DIPNAME( 0x50, 0x00, DEF_STR( Lives ) ) PORT_DIPLOCATION("SW1:2,3")
- PORT_DIPSETTING( 0x00, "3" )
- PORT_DIPSETTING( 0x10, "4" )
- PORT_DIPSETTING( 0x40, "5" )
- PORT_DIPSETTING( 0x50, "6" )
- PORT_DIPNAME( 0x26, 0x06, DEF_STR( Difficulty ) ) PORT_DIPLOCATION("SW1:4,5,6")
- PORT_DIPSETTING( 0x00, "1 (Easy)" )
- PORT_DIPSETTING( 0x02, "2" )
- PORT_DIPSETTING( 0x20, "3" )
- PORT_DIPSETTING( 0x22, "4" )
- PORT_DIPSETTING( 0x04, "5" )
- PORT_DIPSETTING( 0x06, "6" )
- PORT_DIPSETTING( 0x24, "7" )
- PORT_DIPSETTING( 0x26, "8 (Hard)" )
- PORT_DIPNAME( 0x08, 0x08, "Extra Life Range" ) PORT_DIPLOCATION("SW1:7") // exact points value varies by 10000 for every level of difficulty chosen via the dips above
- PORT_DIPSETTING( 0x08, "100000 - 170000 points" )
- PORT_DIPSETTING( 0x00, "20000 - 90000 points" )
- PORT_DIPNAME( 0x80, 0x00, DEF_STR( Demo_Sounds ) ) PORT_DIPLOCATION("SW1:8")
- PORT_DIPSETTING( 0x80, DEF_STR( Off ) )
- PORT_DIPSETTING( 0x00, DEF_STR( On ) )
-
- PORT_START("SYSTEM")
- PORT_BIT( 0x01, IP_ACTIVE_HIGH, IPT_COIN1 )
- PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_UNKNOWN )
- PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_START1 )
- PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_START2 )
- PORT_SERVICE_NO_TOGGLE(0x10, IP_ACTIVE_LOW)
- PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_UNKNOWN )
- PORT_BIT( 0x40, IP_ACTIVE_HIGH, IPT_CUSTOM ) /* this has to be LO */
- PORT_BIT( 0x80, IP_ACTIVE_HIGH, IPT_CUSTOM ) /* this has to be LO */
-
- PORT_START("INPUTS")
- PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_JOYSTICK_RIGHT )
- PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_JOYSTICK_LEFT )
- PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_BUTTON1 )
- PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_BUTTON2 )
- PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_JOYSTICK_UP )
- PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_JOYSTICK_DOWN )
- PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_UNKNOWN )
- PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_UNKNOWN )
-
- PORT_START("UNK")
- PORT_BIT( 0xff, IP_ACTIVE_HIGH, IPT_UNKNOWN )
-INPUT_PORTS_END
-
-
-static INPUT_PORTS_START( dealer )
- PORT_START("DSW")
- PORT_DIPNAME( 0x01, 0x00, DEF_STR( Demo_Sounds ) ) PORT_DIPLOCATION("SW1:1")
- PORT_DIPSETTING( 0x01, DEF_STR( Off ) )
- PORT_DIPSETTING( 0x00, DEF_STR( On ) )
- PORT_DIPNAME( 0x02, 0x02, DEF_STR( Free_Play ) ) PORT_DIPLOCATION("SW1:2")
- PORT_DIPSETTING( 0x02, DEF_STR( Off ) )
- PORT_DIPSETTING( 0x00, DEF_STR( On ) )
- PORT_DIPUNUSED_DIPLOC( 0x04, 0x04, "SW1:3" )
- PORT_DIPUNUSED_DIPLOC( 0x08, 0x08, "SW1:4" )
- PORT_DIPUNUSED_DIPLOC( 0x10, 0x10, "SW1:5" )
- PORT_DIPUNUSED_DIPLOC( 0x20, 0x20, "SW1:6" )
- PORT_DIPNAME( 0x40, 0x40, DEF_STR( Cabinet ) ) PORT_DIPLOCATION("SW1:7")
- PORT_DIPSETTING( 0x40, DEF_STR( Upright ) )
- PORT_DIPSETTING( 0x00, DEF_STR( Cocktail ) )
- PORT_DIPNAME( 0x80, 0x80, DEF_STR( Flip_Screen ) ) PORT_DIPLOCATION("SW1:8")
- PORT_DIPSETTING( 0x80, DEF_STR( Off ) )
- PORT_DIPSETTING( 0x00, DEF_STR( On ) )
-
- PORT_START("SYSTEM")
- PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_UNKNOWN )
- PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_UNKNOWN )
- PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_UNKNOWN )
- PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_UNKNOWN )
- PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_UNKNOWN )
- PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_UNKNOWN )
- PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_UNKNOWN )
- PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_UNKNOWN )
-
- PORT_START("INPUTS")
- PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_POKER_HOLD1 )
- PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_POKER_HOLD2 )
- PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_POKER_HOLD3 )
- PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_POKER_HOLD4 )
- PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_POKER_HOLD5 )
- PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_UNKNOWN )
- PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_UNKNOWN )
- PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_UNKNOWN )
-
- PORT_START("INPUTS2")
- PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_POKER_CANCEL )
- PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_GAMBLE_DEAL ) PORT_NAME( "Draw" )
- PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_GAMBLE_STAND )
- PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_UNKNOWN )
- PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_GAMBLE_BET ) PORT_NAME( "Play" )
- PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_UNKNOWN )
- PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_COIN1 )
- PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_SERVICE )
-INPUT_PORTS_END
-
-static INPUT_PORTS_START( beastf )
- PORT_INCLUDE( dealer )
-
- PORT_MODIFY("INPUTS")
- PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_JOYSTICK_LEFT ) PORT_4WAY
- PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_JOYSTICK_RIGHT ) PORT_4WAY
- PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_JOYSTICK_DOWN ) PORT_4WAY
- PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_JOYSTICK_UP ) PORT_4WAY
- PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_BUTTON1 )
- PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_BUTTON2 )
- PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_START1 )
- PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_START2 )
-
- PORT_MODIFY("INPUTS2")
- PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_JOYSTICK_LEFT ) PORT_4WAY PORT_PLAYER(2)
- PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_JOYSTICK_RIGHT ) PORT_4WAY PORT_PLAYER(2)
- PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_JOYSTICK_DOWN ) PORT_4WAY PORT_PLAYER(2)
- PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_JOYSTICK_UP ) PORT_4WAY PORT_PLAYER(2)
- PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_BUTTON1 ) PORT_PLAYER(2)
- PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_BUTTON2 ) PORT_PLAYER(2)
-INPUT_PORTS_END
-
-
-/*************************************
- *
- * Machine drivers
- *
- *************************************/
-
-MACHINE_START_MEMBER(epos_state,epos)
-{
- save_item(NAME(m_palette_bank));
- save_item(NAME(m_counter));
- save_item(NAME(m_input_multiplex));
- save_item(NAME(m_ay_porta_multiplex));
-}
-
-void epos_state::machine_reset()
-{
- m_palette_bank = 0;
- m_counter = 0;
- m_input_multiplex = 3;
- m_ay_porta_multiplex = 0;
-}
-
-
-MACHINE_START_MEMBER(epos_state,dealer)
-{
- uint8_t *ROM = memregion("maincpu")->base();
- membank("bank1")->configure_entries(0, 4, &ROM[0x0000], 0x10000);
- membank("bank2")->configure_entries(0, 2, &ROM[0x6000], 0x1000);
-
- membank("bank1")->set_entry(0);
- membank("bank2")->set_entry(0);
-
- MACHINE_START_CALL_MEMBER(epos);
-}
-
-void epos_state::epos(machine_config &config) /* EPOS TRISTAR 8000 PCB */
-{
- /* basic machine hardware */
- Z80(config, m_maincpu, XTAL(11'000'000)/4); /* 2.75 MHz schematics confirm 11MHz XTAL (see notes) */
- m_maincpu->set_addrmap(AS_PROGRAM, &epos_state::epos_map);
- m_maincpu->set_addrmap(AS_IO, &epos_state::epos_io_map);
- m_maincpu->set_vblank_int("screen", FUNC(epos_state::irq0_line_hold));
-
- WATCHDOG_TIMER(config, "watchdog");
-
- /* video hardware */
- screen_device &screen(SCREEN(config, "screen", SCREEN_TYPE_RASTER));
- screen.set_refresh_hz(60);
- screen.set_vblank_time(ATTOSECONDS_IN_USEC(2500) /* not accurate */);
- screen.set_size(272, 241);
- screen.set_visarea(0, 271, 0, 235);
- screen.set_screen_update(FUNC(epos_state::screen_update));
-
- PALETTE(config, m_palette, FUNC(epos_state::epos_palette), 32);
-
- /* sound hardware */
- SPEAKER(config, "mono").front_center();
- AY8912(config, "aysnd", XTAL(11'000'000)/16).add_route(ALL_OUTPUTS, "mono", 1.0); /* 0.6875 MHz, confirmed from schematics */
-}
-
-
-void epos_state::dealer(machine_config &config) /* EPOS TRISTAR 9000 PCB */
-{
- /* basic machine hardware */
- Z80(config, m_maincpu, XTAL(22'118'400)/8); /* 2.7648 MHz (measured) */
- m_maincpu->set_addrmap(AS_PROGRAM, &epos_state::dealer_map);
- m_maincpu->set_addrmap(AS_IO, &epos_state::dealer_io_map);
- m_maincpu->set_vblank_int("screen", FUNC(epos_state::irq0_line_hold));
-
- i8255_device &ppi(I8255A(config, "ppi8255"));
- ppi.in_pa_callback().set(FUNC(epos_state::i8255_porta_r));
- ppi.out_pc_callback().set(FUNC(epos_state::i8255_portc_w));
-
- NVRAM(config, "nvram", nvram_device::DEFAULT_ALL_0);
-
- MCFG_MACHINE_START_OVERRIDE(epos_state,dealer)
-
- // RAM-based palette instead of prom
- PALETTE(config, m_palette, palette_device::BLACK, 32);
-
- WATCHDOG_TIMER(config, "watchdog");
-
- /* video hardware */
- screen_device &screen(SCREEN(config, "screen", SCREEN_TYPE_RASTER));
- screen.set_refresh_hz(60);
- screen.set_vblank_time(ATTOSECONDS_IN_USEC(2500) /* not accurate */);
- screen.set_size(272, 241);
- screen.set_visarea(0, 271, 0, 235);
- screen.set_screen_update(FUNC(epos_state::screen_update));
-
- /* sound hardware */
- SPEAKER(config, "mono").front_center();
- ay8910_device &aysnd(AY8910(config, "aysnd", XTAL(22'118'400)/32)); /* 0.6912 MHz (measured) */
- aysnd.add_route(ALL_OUTPUTS, "mono", 1.0);
- aysnd.port_a_read_callback().set(FUNC(epos_state::ay_porta_mpx_r));
- // port a writes?
- aysnd.port_b_write_callback().set(FUNC(epos_state::flip_screen_w)); // flipscreen and ay port a multiplex control
-}
-
-
-/*************************************
- *
- * ROM definitions
- *
- *************************************/
-
-// Tristar 8000 boards:
-ROM_START( megadon )
- ROM_REGION( 0x10000, "maincpu", 0 )
- ROM_LOAD( "2732u10b.bin", 0x0000, 0x1000, CRC(af8fbe80) SHA1(2d7857616462112fe17343a9357ee51d8f965a0f) )
- ROM_LOAD( "2732u09b.bin", 0x1000, 0x1000, CRC(097d1e73) SHA1(b6141155b2c63c33a367dd18fe53ff9f01b99380) )
- ROM_LOAD( "2732u08b.bin", 0x2000, 0x1000, CRC(526784da) SHA1(7d9f43dc6975a018bec95982029ce7ac9f675869) )
- ROM_LOAD( "2732u07b.bin", 0x3000, 0x1000, CRC(5b060910) SHA1(98a719bf0ffe8010437565de681aaefa647d9a6c) )
- ROM_LOAD( "2732u06b.bin", 0x4000, 0x1000, CRC(8ac8af6d) SHA1(53c123f0e9f0443737c39c01dbdb685189cffa92) )
- ROM_LOAD( "2732u05b.bin", 0x5000, 0x1000, CRC(052bb603) SHA1(eb74a9563f44cca50dc2c475e4a376ed14e4f56f) )
- ROM_LOAD( "2732u04b.bin", 0x6000, 0x1000, CRC(9b8b7e92) SHA1(051ad9a8ba51740a865e3c95a738658b30bbbe60) )
- ROM_LOAD( "2716u11b.bin", 0x7000, 0x0800, CRC(599b8b61) SHA1(e687c6f475a0fead3e47f05b1d1b3b29cf4a83a1) )
-
- ROM_REGION( 0x0020, "proms", 0 )
- ROM_LOAD( "74s288.bin", 0x0000, 0x0020, CRC(c779ea99) SHA1(7702ae3684579950b36274ea91d4267c96faeeb8) )
-ROM_END
-
-
-ROM_START( catapult )
- ROM_REGION( 0x10000, "maincpu", 0 )
- ROM_LOAD( "co3223.u10", 0x0000, 0x1000, CRC(50abcfd2) SHA1(13ce04addc7bcaa1ec6659da26b1c13ed9dc28f9) )
- ROM_LOAD( "co3223.u09", 0x1000, 0x1000, CRC(fd5a9a1c) SHA1(512374e8450459537ba2cc41e7d0178052445316) )
- ROM_LOAD( "co3223.u08", 0x2000, 0x1000, BAD_DUMP CRC(4bfc36f3) SHA1(b916805eed40cfeff0c1b0cb3cdcbcc6e362a236) ) /* BADADDR xxxx-xxxxxxx */
- ROM_LOAD( "co3223.u07", 0x3000, 0x1000, CRC(4113bb99) SHA1(3cebb874dae211d75082209e913d4afa4f621de1) )
- ROM_LOAD( "co3223.u06", 0x4000, 0x1000, CRC(966bb9f5) SHA1(1a217c6f7a88c58e0deae0290bc5ddd2789d18eb) )
- ROM_LOAD( "co3223.u05", 0x5000, 0x1000, CRC(65f9fb9a) SHA1(63b616a736d9e39a8f2f76889fd7c5fe4128a966) )
- ROM_LOAD( "co3223.u04", 0x6000, 0x1000, CRC(648453bc) SHA1(8e4538aedad4d32bd046aad474dbcc689ee8fe53) )
- ROM_LOAD( "co3223.u11", 0x7000, 0x0800, CRC(08fb8c28) SHA1(0b08cc2727a54e0ad7472234be0f637b46bc3253) )
-
- ROM_REGION( 0x0020, "proms", 0 )
- ROM_LOAD( "co3223.u66", 0x0000, 0x0020, CRC(e7de76a7) SHA1(101ce85459a59c0d01ce3ea96480f1f8413a788e) )
-ROM_END
-
-
-ROM_START( suprglob )
- ROM_REGION( 0x10000, "maincpu", 0 )
- ROM_LOAD( "u10", 0x0000, 0x1000, CRC(c0141324) SHA1(a54bd71da233eb22f45da630693fddd5a0bcf25b) )
- ROM_LOAD( "u9", 0x1000, 0x1000, CRC(58be8128) SHA1(534f0a093b3ff577a2a5461498bc11ce14dc6d97) )
- ROM_LOAD( "u8", 0x2000, 0x1000, CRC(6d088c16) SHA1(0929ea1b58eab997b5d9c9642f8b47557a4045f1) )
- ROM_LOAD( "u7", 0x3000, 0x1000, CRC(b2768203) SHA1(9de52f4dbe6a46ea1b9b7f9cf70378211d372353) )
- ROM_LOAD( "u6", 0x4000, 0x1000, CRC(976c8f46) SHA1(120c76eff8c04ccb5ad945c4333e8c9de0cbc3af) )
- ROM_LOAD( "u5", 0x5000, 0x1000, CRC(340f5290) SHA1(2e5fa0c41d1626e5a435f2c55eec0bcdcb004223) )
- ROM_LOAD( "u4", 0x6000, 0x1000, CRC(173bd589) SHA1(25690a0c3cd0e017f8d220d8fbf2eaeb86f05fc5) )
- ROM_LOAD( "u11", 0x7000, 0x0800, CRC(d45b740d) SHA1(54c15f378b6d91ea1aba0a51921178bb15854079) )
-
- ROM_REGION( 0x0020, "proms", 0 )
- ROM_LOAD( "82s123.u66", 0x0000, 0x0020, CRC(f4f6ddc5) SHA1(cab915acbefb5f451f538dd538bf9b3dd14bb1f5) )
-ROM_END
-
-
-ROM_START( theglob )
- ROM_REGION( 0x10000, "maincpu", 0 )
- ROM_LOAD( "globu10.bin", 0x0000, 0x1000, CRC(08fdb495) SHA1(739efa676b5a3df36a6061382aeb8c2d495ba23f) )
- ROM_LOAD( "globu9.bin", 0x1000, 0x1000, CRC(827cd56c) SHA1(3aedc1cefb463cf6b31befb33e50c832dc2e3941) )
- ROM_LOAD( "globu8.bin", 0x2000, 0x1000, CRC(d1219966) SHA1(571349f9c978fdcf826a0c66c3fb11a9e27b240a) )
- ROM_LOAD( "globu7.bin", 0x3000, 0x1000, CRC(b1649da7) SHA1(1509d48a72e545195e45d1170cdb113c6aecc8d9) )
- ROM_LOAD( "globu6.bin", 0x4000, 0x1000, CRC(b3457e67) SHA1(1347bdf085ad69879f9a9e7e4ed1ca4869e8e8cd) )
- ROM_LOAD( "globu5.bin", 0x5000, 0x1000, CRC(89d582cd) SHA1(f331c7a2fce606153992abb312c5406251a7fb3b) )
- ROM_LOAD( "globu4.bin", 0x6000, 0x1000, CRC(7ee9fdeb) SHA1(a8e0dd5d1cdcff132edc0eb182b66656ce244fa1) )
- ROM_LOAD( "globu11.bin", 0x7000, 0x0800, CRC(9e05dee3) SHA1(751799b23f0e664f59d3785b438ec3ae9f5bab2c) )
-
- ROM_REGION( 0x0020, "proms", 0 )
- ROM_LOAD( "82s123.u66", 0x0000, 0x0020, CRC(f4f6ddc5) SHA1(cab915acbefb5f451f538dd538bf9b3dd14bb1f5) )
-ROM_END
-
-
-ROM_START( theglob2 )
- ROM_REGION( 0x10000, "maincpu", 0 )
- ROM_LOAD( "611293.u10", 0x0000, 0x1000, CRC(870af7ce) SHA1(f901619663313a72997f30ccecdeac8294fe200e) )
- ROM_LOAD( "611293.u9", 0x1000, 0x1000, CRC(a3679782) SHA1(fbc26ae98e2bf10272d61159b084d78a6f410374) )
- ROM_LOAD( "611293.u8", 0x2000, 0x1000, CRC(67499d1a) SHA1(dce7041df5ed1847e0ffc82672d09e00b16de3a9) )
- ROM_LOAD( "611293.u7", 0x3000, 0x1000, CRC(55e53aac) SHA1(20a428db287e8b7fb55cb9fe1a1ed0196481114c) )
- ROM_LOAD( "611293.u6", 0x4000, 0x1000, CRC(c64ad743) SHA1(572ff6acb9b2281581974646e96699d7d2388aff) )
- ROM_LOAD( "611293.u5", 0x5000, 0x1000, CRC(f93c3203) SHA1(8cb88b5202e99d206eccf7d25e168cf23acee19b) )
- ROM_LOAD( "611293.u4", 0x6000, 0x1000, CRC(ceea0018) SHA1(511430539429ef0e5368f7b605f2e680ca9038bc) )
- ROM_LOAD( "611293.u11", 0x7000, 0x0800, CRC(6ac83f9b) SHA1(b1e8482ec04107f0e595a714b7c0f70571aca6e5) )
-
- ROM_REGION( 0x0020, "proms", 0 )
- ROM_LOAD( "82s123.u66", 0x0000, 0x0020, CRC(f4f6ddc5) SHA1(cab915acbefb5f451f538dd538bf9b3dd14bb1f5) )
-ROM_END
-
-
-ROM_START( theglob3 )
- ROM_REGION( 0x10000, "maincpu", 0 )
- ROM_LOAD( "theglob3.u10", 0x0000, 0x1000, CRC(969cfaf6) SHA1(b63226b8694640d6452bca12755780d1b52d1d3c) )
- ROM_LOAD( "theglob3.u9", 0x1000, 0x1000, CRC(8e6c010a) SHA1(ec9627742ce52eb29bbafc9d0555d16ac7146f2e) )
- ROM_LOAD( "theglob3.u8", 0x2000, 0x1000, CRC(1c1ca5c8) SHA1(6e5f9d7f9f016a72003433375c806c5f921ed423) )
- ROM_LOAD( "theglob3.u7", 0x3000, 0x1000, CRC(a54b9d22) SHA1(3db96d1f55642ecf1ebc76387cac76e8f9721919) )
- ROM_LOAD( "theglob3.u6", 0x4000, 0x1000, CRC(5a6f82a9) SHA1(ea92ad949373e8b1f06c65f243ceedad2fdcd934) )
- ROM_LOAD( "theglob3.u5", 0x5000, 0x1000, CRC(72f935db) SHA1(d7023cf5f16a77a42590a9c97c2690ac0e3d282a) )
- ROM_LOAD( "theglob3.u4", 0x6000, 0x1000, CRC(81db53ad) SHA1(a1e4aa8e08ca0f585b3638a3849a465977d44af0) )
- ROM_LOAD( "theglob3.u11", 0x7000, 0x0800, CRC(0e2e6359) SHA1(f231637ad4c997406989cf5a701d26c95e69171e) )
-
- ROM_REGION( 0x0020, "proms", 0 )
- ROM_LOAD( "82s123.u66", 0x0000, 0x0020, CRC(f4f6ddc5) SHA1(cab915acbefb5f451f538dd538bf9b3dd14bb1f5) )
-ROM_END
-
-
-ROM_START( igmo )
- ROM_REGION( 0x10000, "maincpu", 0 )
- ROM_LOAD( "u10_igmo_i05134.u10", 0x0000, 0x1000, CRC(a9f691a4) SHA1(e3f2dc41bd8760fc52e99b7e9faa12c7cf51ffe0) )
- ROM_LOAD( "u9_igmo_i05134.u9", 0x1000, 0x1000, CRC(3c133c97) SHA1(002b5aff6b947b6a9cbabeed5be798c1ddf2bda1) )
- ROM_LOAD( "u8_igmo_i05134.u8", 0x2000, 0x1000, CRC(5692f8d8) SHA1(6ab50775dff49330a85fbfb2d4d4c3a2e54df3d1) )
- ROM_LOAD( "u7_igmo_i05134.u7", 0x3000, 0x1000, CRC(630ae2ed) SHA1(0c293b6192e703b16ed20c277c706ae90773f477) )
- ROM_LOAD( "u6_igmo_i05134.u6", 0x4000, 0x1000, CRC(d3f20e1d) SHA1(c0e0b542ac020adc085ec90c2462c6544098447e) )
- ROM_LOAD( "u5_igmo_i05134.u5", 0x5000, 0x1000, CRC(e26bb391) SHA1(ba0e44c02fbb36e18e0d779d46bb992e6aba6cf1) )
- ROM_LOAD( "u4_igmo_i05134.u4", 0x6000, 0x1000, CRC(762a4417) SHA1(7fed5221950e3e1ce41c0b4ded44597a242a0177) )
- ROM_LOAD( "u11_igmo_i05134.u11", 0x7000, 0x0800, CRC(8c675837) SHA1(2725729693960b53ea01ebffa0a81df2cd425890) )
-
- ROM_REGION( 0x0020, "proms", 0 )
- ROM_LOAD( "82s123.u66", 0x0000, 0x0020, CRC(1ba03ffe) SHA1(f5692c06ae6d20c010430c8d08f5c60e78d36dc9) )
-ROM_END
-
-
-ROM_START( eeekk )
- ROM_REGION( 0x10000, "maincpu", 0 )
- ROM_LOAD( "u10_e12063.u10", 0x0000, 0x1000, CRC(edd05de2) SHA1(25dfa7ad2e29b1ca9ce9bb36bf1a573baabb4d5b) )
- ROM_LOAD( "u9_e12063.u9", 0x1000, 0x1000, CRC(6f57114a) SHA1(417b910a4343da026426b4cfd0a83b9142c87353) )
- ROM_LOAD( "u8_e12063.u8", 0x2000, 0x1000, CRC(bcb0ebbd) SHA1(a2a00dedee12d6006817021e98fb44b2339127a0) )
- ROM_LOAD( "u7_e12063.u7", 0x3000, 0x1000, CRC(a0df8f77) SHA1(ee2afed25ab32bf09b14e8638d03b6e2f8e6b337) )
- ROM_LOAD( "u6_e12063.u6", 0x4000, 0x1000, CRC(61953b0a) SHA1(67bcb4286e39cdda20684a4f580392468b08800e) )
- ROM_LOAD( "u5_e12063.u5", 0x5000, 0x1000, CRC(4c22c6d9) SHA1(94a8fc951994746f8ccfb77d80f8b98fde8a6f33) )
- ROM_LOAD( "u4_e12063.u4", 0x6000, 0x1000, CRC(3d341208) SHA1(bc4d2567df2779d97e718376c4bf682ba459c01e) )
- ROM_LOAD( "u11_e12063.u11", 0x7000, 0x0800, CRC(417faff0) SHA1(7965155ee32694ea9a10245db73d8beef229408c) )
-
- ROM_REGION( 0x0020, "proms", 0 )
- ROM_LOAD( "74s288.u66", 0x0000, 0x0020, CRC(f2078c38) SHA1(7bfd49932a6fd8840514b7af93a64cedb248122d) )
-ROM_END
-
-
-// Tristar 9000 boards:
-ROM_START( dealer )
- ROM_REGION( 0x40000, "maincpu", 0 )
- ROM_LOAD( "u1.bin", 0x0000, 0x2000, CRC(e06f3563) SHA1(0d58cd1f2e1ca89adb9c64d7dd520bb1f2d50f1a) )
- ROM_LOAD( "u2.bin", 0x2000, 0x2000, CRC(726bbbd6) SHA1(3538f3d655899c2a0f984c43fb7545ea4be1b231) )
- ROM_LOAD( "u3.bin", 0x4000, 0x2000, CRC(ab721455) SHA1(a477da0590e0431172baae972e765473e19dcbff) )
- ROM_LOAD( "u4.bin", 0x6000, 0x2000, CRC(ddb903e4) SHA1(4c06a2048b1c6989c363b110a17c33180025b9c8) )
-
- ROM_REGION( 0x1000, "nvram", 0)
- ROM_LOAD( "dealer.nv", 0, 0x1000, CRC(a6f88459) SHA1(1deda2a71433c97fe3e5cb39defc285f4fa9c9b8) )
-ROM_END
-
-/*
-
-Revenger 84 - EPOS
-
-EPOS TRISTAR 9000
-+-------------------------------+
-| |
-| DSW |
-| 4116 4116 |
-| 8910 Z80A 4116 4116 |
-| 4116 4116 |
-| 6116 BAT 4116 4116 |
-| 6116 4116 4116 |
-| U4 4116 4116 74S189 |
-| U3 4116 4116 74S189 |
-| U2 PAL.U13 4116 4116 |
-| U1 PAL10L8 8255 DM74S288N |
-| 22.1184MHz|
-| |
-| LM384N |
-| VOL |
-+--|28 pin Connector|-----------+
-
- CPU: Z80A 2.764800 MHz [22.1184MHz/8]
-Sound: AY-3-8910 0.691200 MHz [22.1184MHz/32]
- XTAL: 22.1184MHz
- DSW: 8 position dipswitch bank
- BAT: Battery (battery backed up RAM for high scores)
- VOL: Volume Pot
-
-28 Pin non-JAMMA connector
-
- 4 ROMs at U1 through U4 are 2764 type
- BPROM at U60 is a DM74S288N
- 2 pals, U12 is a PAL10L8, U13 PAL type is unknown (markings scrubbed off)
-
-4116 RAS is = 2.764800 MHz [22.1184MHz/8]
-4116 CAS is = 1.382400 MHz [22.1184MHz/16]
-
-*/
-
-ROM_START( revngr84 )
- ROM_REGION( 0x40000, "maincpu", 0 )
- ROM_LOAD( "u_1__revenger__r06254__=c=_epos_corp.m5l2764k.u1", 0x0000, 0x2000, CRC(308f231f) SHA1(cf06695601bd0387e4fcb64d9b34143323e98b07) ) /* labeled as "U 1 // REVENGER // R06254 // (C) EPOS CORP" (hand written R06254 over R06124) */
- ROM_LOAD( "u_2__revenger__r06254__=c=_epos_corp.m5l2764k.u2", 0x2000, 0x2000, CRC(e80bbfb4) SHA1(9302beaef8bbb7376b6a20e9ee5adbcf60d66dd8) ) /* labeled as "U 2 // REVENGER // R06254 // (C) EPOS CORP" (hand written R06254 over R06124) */
- ROM_LOAD( "u_3__revenger__r06254__=c=_epos_corp.m5l2764k.u3", 0x4000, 0x2000, CRC(d9270929) SHA1(a95034b5387a40e02f04bdfa79e1d8e65dad30fe) ) /* labeled as "U 3 // REVENGER // R06254 // (C) EPOS CORP" (hand written R06254 over R06124) */
- ROM_LOAD( "u_4__revenger__r06254__=c=_epos_corp.m5l2764k.u4", 0x6000, 0x2000, CRC(d6e6cfa8) SHA1(f10131bb2e9d088c7b6d6a5d5520073d78ad69cc) ) /* labeled as "U 4 // REVENGER // R06254 // (C) EPOS CORP" (hand written R06254 over R06124) */
-
- ROM_REGION( 0x0020, "proms", 0 )
- ROM_LOAD( "dm74s288n.u60", 0x0000, 0x0020, CRC(be2b0641) SHA1(26982903b6d942af8e0a526412d8e01978d76420) ) // unknown purpose
-
- ROM_REGION( 0x1000, "nvram", 0)
- ROM_LOAD( "revngr84.nv", 0, 0x1000, CRC(a4417770) SHA1(92eded82db0810e7818d2f52a0497032f390fcc1) )
-ROM_END
-
-ROM_START( revenger )
- ROM_REGION( 0x40000, "maincpu", 0 )
- // these roms probably had the same "U x // REVENGER // R06124 // (C) EPOS CORP" printed labels as the newer set above, but without the hand-penned "25" in r06254 written over the printed "12" of r06124 as above
- ROM_LOAD( "r06124.u1", 0x0000, 0x2000, BAD_DUMP CRC(fad1a2a5) SHA1(a31052c91fe67e2e90441abc40b6483f921ecfe3) )
- ROM_LOAD( "r06124.u2", 0x2000, 0x2000, BAD_DUMP CRC(a8e0ee7b) SHA1(f6f78e8ce40eab07de461b364876c1eb4a78d96e) )
- ROM_LOAD( "r06124.u3", 0x4000, 0x2000, BAD_DUMP CRC(cca414a5) SHA1(1c9dd3ff63d57e9452e63083cdbd7f5d693bb686) )
- ROM_LOAD( "r06124.u4", 0x6000, 0x2000, BAD_DUMP CRC(0b81c303) SHA1(9022d18dec11312eb4bb471c22b563f5f897b4f7) )
-
- ROM_REGION( 0x0020, "proms", 0 ) /* this PROM not included in this dump, but assumed to be the same as above set */
- ROM_LOAD( "dm74s288n.u60", 0x0000, 0x0020, CRC(be2b0641) SHA1(26982903b6d942af8e0a526412d8e01978d76420) ) // unknown purpose
-
- ROM_REGION( 0x1000, "nvram", 0)
- ROM_LOAD( "revngr84.nv", 0, 0x1000, CRC(a4417770) SHA1(92eded82db0810e7818d2f52a0497032f390fcc1) )
-ROM_END
-
-ROM_START( beastf )
- ROM_REGION( 0x40000, "maincpu", 0 )
- ROM_LOAD( "u_1__beastie__feastie__b09084.m5l2764k.u1", 0x0000, 0x2000, CRC(820d4019) SHA1(e953aaeeb626776dd86c521066b553d054ae4422) ) /* labeled as "U 1 // BEASTIE // FEASTIE // B09084" */
- ROM_LOAD( "u_2__beastie__feastie__b09084.m5l2764k.u2", 0x2000, 0x2000, CRC(967405d8) SHA1(dd763be909e6966521b01ee878df9cef865c3b30) ) /* labeled as "U 2 // BEASTIE // FEASTIE // B09084" */
- ROM_LOAD( "u_3__beastie__feastie__b09084.m5l2764k.u3", 0x4000, 0x2000, CRC(3edb5381) SHA1(14c236045e6df7a475c32222652860689d4f68ce) ) /* labeled as "U 3 // BEASTIE // FEASTIE // B09084" */
- ROM_LOAD( "u_4__beastie__feastie__b09084.m5l2764k.u4", 0x6000, 0x2000, CRC(c8cd9640) SHA1(72da881b903ead873cc3f4df27646d1ffdd63c1c) ) /* labeled as "U 4 // BEASTIE // FEASTIE // B09084" */
-
- ROM_REGION( 0x1000, "nvram", 0)
- ROM_LOAD( "beastf.nv", 0, 0x1000, CRC(98017b09) SHA1(0e2b2071bb47fc179d5bc36ef9431a9d2727d36a) )
-ROM_END
-
-void epos_state::init_dealer()
-{
- uint8_t *rom = memregion("maincpu")->base();
-
- /* Key 0 */
- for (int A = 0; A < 0x8000; A++)
- rom[A] = bitswap<8>(rom[A] ^ 0xbd, 2,6,4,0,5,7,1,3 );
-
- /* Key 1 */
- for (int A = 0; A < 0x8000; A++)
- rom[A + 0x10000] = bitswap<8>(rom[A], 7,5,4,6,3,2,1,0 );
-
- /* Key 2 */
- for (int A = 0; A < 0x8000; A++)
- rom[A + 0x20000] = bitswap<8>(rom[A] ^ 1, 7,6,5,4,3,0,2,1 );
-
- /* Key 3 */
- for (int A = 0; A < 0x8000; A++)
- rom[A + 0x30000] = bitswap<8>(rom[A] ^ 1, 7,5,4,6,3,0,2,1 );
-
- /*
- there is not enough data to determine key 3.
- the code in question is this:
-
- [this is the data as decrypted by Key 1]
- 2F58: 55 5C 79
- 2F5B: 55 F7 79
- 2F5E: 55 CD 79
-
- it must become
-
- 2F58: 32 3e 78 ld (793e),a
- 2F5B: 32 xx 78 ld (79xx),a
- 2F5E: 32 xx 78 ld (79xx),a
-
- the obvious solution is a combination of key 1 and key 2.
- */
-}
-
-
-/*************************************
- *
- * Game drivers
- *
- *************************************/
-
-/* EPOS TRISTAR 8000 PCB based */
-GAME( 1982, megadon, 0, epos, megadon, epos_state, empty_init, ROT270, "Epos Corporation (Photar Industries license)", "Megadon", MACHINE_SUPPORTS_SAVE )
-GAME( 1982, catapult, 0, epos, catapult, epos_state, empty_init, ROT270, "Epos Corporation", "Catapult", MACHINE_NOT_WORKING | MACHINE_SUPPORTS_SAVE ) /* bad rom, hold f2 for test mode */
-GAME( 1983, suprglob, 0, epos, suprglob, epos_state, empty_init, ROT270, "Epos Corporation", "Super Glob", MACHINE_SUPPORTS_SAVE )
-GAME( 1983, theglob, suprglob, epos, suprglob, epos_state, empty_init, ROT270, "Epos Corporation", "The Glob", MACHINE_SUPPORTS_SAVE )
-GAME( 1983, theglob2, suprglob, epos, suprglob, epos_state, empty_init, ROT270, "Epos Corporation", "The Glob (earlier)", MACHINE_SUPPORTS_SAVE )
-GAME( 1983, theglob3, suprglob, epos, suprglob, epos_state, empty_init, ROT270, "Epos Corporation", "The Glob (set 3)", MACHINE_SUPPORTS_SAVE )
-GAME( 1984, igmo, 0, epos, igmo, epos_state, empty_init, ROT270, "Epos Corporation", "IGMO", MACHINE_SUPPORTS_SAVE )
-GAME( 1983, eeekk, 0, epos, eeekk, epos_state, empty_init, ROT270, "Epos Corporation", "Eeekk!", MACHINE_SUPPORTS_SAVE )
-
-/* EPOS TRISTAR 9000 PCB based */
-GAME( 1984, dealer, 0, dealer, dealer, epos_state, init_dealer, ROT270, "Epos Corporation", "The Dealer", MACHINE_SUPPORTS_SAVE )
-GAME( 1984, revngr84, 0, dealer, beastf, epos_state, init_dealer, ROT270, "Epos Corporation", "Revenger '84 (newer)", MACHINE_SUPPORTS_SAVE )
-GAME( 1984, revenger, revngr84, dealer, beastf, epos_state, init_dealer, ROT270, "Epos Corporation", "Revenger '84 (older)", MACHINE_NOT_WORKING | MACHINE_SUPPORTS_SAVE )
-GAME( 1984, beastf, suprglob, dealer, beastf, epos_state, init_dealer, ROT270, "Epos Corporation", "Beastie Feastie", MACHINE_SUPPORTS_SAVE )