diff options
Diffstat (limited to 'src/mame/drivers/e100.cpp')
-rw-r--r-- | src/mame/drivers/e100.cpp | 627 |
1 files changed, 0 insertions, 627 deletions
diff --git a/src/mame/drivers/e100.cpp b/src/mame/drivers/e100.cpp deleted file mode 100644 index 65ec913ec7a..00000000000 --- a/src/mame/drivers/e100.cpp +++ /dev/null @@ -1,627 +0,0 @@ -// license:BSD-3-Clause -// copyright-holders:Joakim Larsson Edstrom -/* - * - * History of Didact - *------------------ - * See didact.cpp - * - * The Esselte 100 was an original design with a CRT and a full Keyboard that also had a BASIC interpreter - * extended with commands suitable for educational experiments using the exapansion bus and its built in - * io control capabilities. - * - * The Esselte 1000 was an educational package based on Apple II plus software and literature but the relation - * to Didact is at this point unknown so it is probably a pure Esselte software production. If this branded - * distribution is recovered it will be added as a clone of the Apple II driver or just as softlist item. - * - * Misc links about the boards supported by this driver. - *----------------------------------------------------- - * http://elektronikforumet.com/forum/download/file.php?id=63988&mode=view - * http://elektronikforumet.com/forum/viewtopic.php?f=2&t=79576&start=150#p1203915 - * - * TODO: - * ------------------------------- - * - Dump more ROM:s - * - Keyboard for early rev PCB - * - Expansion bus - * - Expansion overlay - * - Serial - ****************************************************************************/ - -#include "emu.h" -#include "cpu/m6800/m6800.h" -#include "machine/6821pia.h" -#include "machine/74145.h" -#include "machine/timer.h" - -// Features -#include "imagedev/cassette.h" -#include "bus/rs232/rs232.h" -#include "speaker.h" -#include "emupal.h" -#include "screen.h" - -//************************************************************************** -// MACROS / CONSTANTS -//************************************************************************** - -//#define LOG_GENERAL (1U << 0) -#define LOG_SETUP (1U << 1) -#define LOG_SCAN (1U << 2) -#define LOG_BANK (1U << 3) -#define LOG_SCREEN (1U << 4) -#define LOG_READ (1U << 5) -#define LOG_CS (1U << 6) - -//#define VERBOSE (LOG_READ | LOG_GENERAL | LOG_SETUP | LOG_BANK) -//#define LOG_OUTPUT_FUNC printf -#include "logmacro.h" - -#define LOGSETUP(...) LOGMASKED(LOG_SETUP, __VA_ARGS__) -#define LOGSCAN(...) LOGMASKED(LOG_SCAN, __VA_ARGS__) -#define LOGBANK(...) LOGMASKED(LOG_BANK, __VA_ARGS__) -#define LOGSCREEN(...) LOGMASKED(LOG_SCREEN, __VA_ARGS__) -#define LOGR(...) LOGMASKED(LOG_READ, __VA_ARGS__) -#define LOGCS(...) LOGMASKED(LOG_CS, __VA_ARGS__) - -#ifdef _MSC_VER -#define FUNCNAME __func__ -#else -#define FUNCNAME __PRETTY_FUNCTION__ -#endif - -#define PIA1_TAG "pia1" -#define PIA2_TAG "pia2" - -/* __________________________________________________________________________________________________________________________________________ - * | The Didact Esselte 100 CPU board rev1, 14/8 1980 in-PCB coil +---- - * | +--+ +--+ +--+ +--+ +--+ +--+ +--------+ |VHF - * | 74 74 74 74 74 74 7805CT 7805CT trim 3,5-13pF |+-----+ | | TV - * | 157 393 04 10 00 03 2N2369 | || o-+ | | +---- - * | +--+ +--+ +--+ +--+ +--+ +--+ | |+---+ | | | - * |1Kohm | +------+ | +---- - * |trim +----------+ |CVS - * | 8 +--+ +--+ +--+ 7805CP | MON - * | 0 74 74 74 +---- - * | 0 132 157 93 | - * | 8 +--+ +--+ +--+ J401 | - * | 1 +--+ +--+ +--+ LM339 | - * | 4 74 +--+ +--+ 74 74 +--+ +--+ J402 | - * | 165 74 74 122 00 74 74 4Mhz | - * | J +--+ 157 393 +--+ +--+ 138 138 XTAL +---- - * | G +--+ +--+ +--+ +--+ +----+ +----+ +----+ |TAPE - * | +----+ +----+ optional | - * | CHAR VIDEO +--+ +----+ +----+ +----+ +----+ +----+ +----+ +----+ +----+ +====++ CPU PIA2 PIA1 +---- - * | ROM RAM 74 6116 6116 6116 6116 || | - * | 2716 MK4118 245 alt alt alt alt 2x || 6802 6821 6821 +---- - * | +----+ +----+ +--+ MK4118 MK4118 MK4118 MK4118 2716 2716 2716 2716 2716|| |PRNT - * |DIDACT ESS 100 CPU +----+ +----+ +----+ +----+ +----+ +----+ +----+ +----+ +----++ | - * |___________________________________________________________________________________________________________+----+__+----+__+----+_____+---- - * - * rev2 board had 4Kb more ROM memory, 2 x 2764 instead of the 6 x 2716 (note the rev1 piggyback on rightmost 2716) with funny address decoding. - * Once we get a rom dump for rev 1 the driver need to accomodate another keymap too so probably needs to be splitted somehow. - * __________________________________________________________________________________________________________________________________________ - * | The Didact Esselte 100 CPU board rev2, 15/4 1983 in-PCB coil +---- - * | +--+ +--+ +--+ +--+ +--+ +--+ +--------+ |VHF - * | 74 74 74 74 74 74 7805CT 7805CT trim 3,5-13pF |+-----+ | | TV - * | 93 393 10 393 00 03 2N2369 | || o-+ | | +---- - * | +--+ +--+ +--+ +--+ +--+ +--+ | |+---+ | | | - * |1Kohm | +------+ | +---- - * |trim +----------+ |CVS - * | +--+ +--+ +--+ +--+ +--+ J 7805CP | MON - * | 74 74 74 74 74 2 +---- - * | 165 132 157 157 04 0 | - * | +--+ +--+ +--+ +--+ +--+ 1 J 2 0 2 +----+ +----+ J401 | - * | | - * | +----+ +----+ +--+ +--+ +--+ +--+ +--+ U202 U201 J402 | - * | CHAR VIDEO 74 74 74 74 74 4Mhz | - * | ROM RAM 157 138 08 00 138 2764 2764 XTAL +---- - * | 2716 HM6116 +--+ +--+ +--+ +--+ +--+ +----+ +----+ +----+ |TAPE - * | +----+ +----+ J +----+ +----+ optional | - * | +--+ 2 +----+ +----+ +----+ +----+ +----+ +----+ +----+ +----+ CPU PIA2 PIA1 +---- - * | 74 0 6116 6116 6116 6116 6116 6116 6116 6116 +--+ | - * | 8169 830415 245 3 opt opt opt opt 6802 6821 6821 LM +---- - * | ESSELTE 100 +--+ 339 |PRNT - * | CPU 100 +----+ +----+ +----+ +----+ +----+ +----+ +----+ +----+ +--+ | - * |___________________________________________________________________________________________________________+----+__+----+__+----+_____+---- - * - * Both rev1 and rev2 has a matrix keyboard PCB with a 74LS145 connected to J402 (PIA2) - */ - -/* Esselte 100 driver class */ -class e100_state : public driver_device -{ -public: - e100_state(const machine_config &mconfig, device_type type, const char * tag) - : driver_device(mconfig, type, tag) - ,m_maincpu(*this, "maincpu") - ,m_kbd_74145(*this, "kbd_74145") - ,m_vram(*this, "vram") - ,m_cassette(*this, "cassette") - ,m_rs232(*this, "rs232") - ,m_chargen(*this, "chargen") - ,m_io_line0(*this, "LINE0") - ,m_io_line1(*this, "LINE1") - ,m_io_line2(*this, "LINE2") - ,m_io_line3(*this, "LINE3") - ,m_io_line4(*this, "LINE4") - ,m_io_line5(*this, "LINE5") - ,m_io_line6(*this, "LINE6") - ,m_io_line7(*this, "LINE7") - ,m_io_line8(*this, "LINE8") - ,m_io_line9(*this, "LINE9") - ,m_pia1(*this, PIA1_TAG) - ,m_pia2(*this, PIA2_TAG) - ,m_pia1_B(0) - ,m_50hz(0) - { } - - void e100(machine_config &config); - -private: - required_device<m6802_cpu_device> m_maincpu; - required_device<ttl74145_device> m_kbd_74145; - required_shared_ptr<uint8_t> m_vram; - required_device<cassette_image_device> m_cassette; - optional_device<rs232_port_device> m_rs232; - required_region_ptr<uint8_t> m_chargen; - uint32_t screen_update(screen_device &screen, bitmap_ind16 &bitmap, const rectangle &cliprect); - virtual void machine_reset() override { m_maincpu->reset(); LOG("--->%s()\n", FUNCNAME); }; - virtual void machine_start() override; - DECLARE_READ8_MEMBER( pia_r ); - DECLARE_WRITE8_MEMBER( pia_w ); - DECLARE_READ8_MEMBER( pia1_kbA_r ); - DECLARE_WRITE8_MEMBER( pia1_kbA_w ); - DECLARE_READ8_MEMBER( pia1_kbB_r ); - DECLARE_WRITE8_MEMBER( pia1_kbB_w ); - DECLARE_READ_LINE_MEMBER( pia1_ca1_r ); - DECLARE_READ_LINE_MEMBER( pia1_cb1_r ); - DECLARE_WRITE_LINE_MEMBER( pia1_ca2_w); - DECLARE_WRITE_LINE_MEMBER( pia1_cb2_w); - TIMER_DEVICE_CALLBACK_MEMBER(rtc_w); - void e100_map(address_map &map); - - required_ioport m_io_line0; - required_ioport m_io_line1; - required_ioport m_io_line2; - required_ioport m_io_line3; - required_ioport m_io_line4; - required_ioport m_io_line5; - required_ioport m_io_line6; - required_ioport m_io_line7; - required_ioport m_io_line8; - required_ioport m_io_line9; - required_device<pia6821_device> m_pia1; - required_device<pia6821_device> m_pia2; - uint8_t m_pia1_B; - uint8_t m_50hz; -}; - -TIMER_DEVICE_CALLBACK_MEMBER(e100_state::rtc_w) -{ - m_pia2->ca1_w((m_50hz++ & 1)); -} - -void e100_state::machine_start() -{ - LOG("%s()\n", FUNCNAME); - - /* register for state saving */ - save_item(NAME(m_50hz)); - save_item(NAME(m_pia1_B)); -} - -uint32_t e100_state::screen_update(screen_device &screen, bitmap_ind16 &bitmap, const rectangle &cliprect) -{ - int x, y; - int vramad; - uint8_t *chardata; - uint8_t charcode; - - LOGSCREEN("%s()\n", FUNCNAME); - vramad = 0; - for (int row = 0; row < 32 * 8; row += 8) - { - for (int col = 0; col < 32 * 8; col += 8) - { - /* look up the character data */ - charcode = m_vram[vramad]; - if (VERBOSE && charcode != 0x20 && charcode != 0) LOGSCREEN("\n %c at X=%d Y=%d: ", charcode, col, row); - chardata = &m_chargen[(charcode * 8)]; - /* plot the character */ - for (y = 0; y < 8; y++) - { - if (VERBOSE && charcode != 0x20 && charcode != 0) LOGSCREEN("\n %02x: ", *chardata); - for (x = 0; x < 8; x++) - { - if (VERBOSE && charcode != 0x20 && charcode != 0) LOGSCREEN(" %02x: ", *chardata); - bitmap.pix16(row + y, col + x) = (*chardata & (1 << x)) ? 1 : 0; - } - chardata++; - } - vramad++; - } - if (VERBOSE && charcode != 0x20 && charcode != 0) LOGSCREEN("\n"); - } - - return 0; -} - -/* PIA write - the Esselte 100 allows the PIA:s to be accessed simultaneously */ -WRITE8_MEMBER( e100_state::pia_w ) -{ - LOG("%s(%02x)\n", FUNCNAME, data); - if ((offset & 0x08) == 0x08) - { - LOG("- PIA1\n"); - m_pia1->write(offset, data); - } - if ((offset & 0x10) == 0x10) - { - LOG("- PIA2\n"); - m_pia2->write(offset, data); - } - if (VERBOSE && (offset & 0x18) == 0x18) - { - LOGCS("- Dual device write access!\n"); - } - if (VERBOSE && (offset & 0x18) == 0x00) - { - logerror("- Funny write at offset %02x!\n", offset); - } -} - -/* PIA read - the Esselte 100 allows the PIA:s to be accessed simultaneously */ -READ8_MEMBER( e100_state::pia_r ) -{ - uint8_t data = 0; - - switch (offset & 0x18) - { - case 0x18: // read PIA1 and PIA2 at the same time, should really only happen for writes... - { - uint8_t data1 = m_pia1->read(offset); - uint8_t data2 = m_pia2->read(offset); - logerror("%s: Dual device read may have caused unpredictable results on real hardware\n", FUNCNAME); - data = data1 & data2; // We assume that the stable behaviour is that data lines with a low level by either device succeeds - LOGCS("%s %s[%02x] %02x & %02x -> %02x Dual device read!!\n", PIA1_TAG "/" PIA2_TAG, FUNCNAME, offset, data1, data2, data); - } - break; - case 0x08: // PIA1 - data = m_pia1->read(offset); - LOGCS("%s %s(%02x)\n", PIA1_TAG, FUNCNAME, data); - break; - case 0x10: // PIA2 - data = m_pia2->read(offset); - LOGCS("%s %s(%02x)\n", PIA2_TAG, FUNCNAME, data); - break; - default: // None of the devices are selected - logerror("%s: Funny read at offset %02x\n", FUNCNAME, offset); - } - return data; -} - -WRITE8_MEMBER( e100_state::pia1_kbA_w ) -{ - LOG("%s(%02x)\n", FUNCNAME, data); -} - -READ8_MEMBER( e100_state::pia1_kbA_r ) -{ - int ls145; - uint8_t pa = 0x00; - - // Read out the selected column - ls145 = m_kbd_74145->read() & 0x3ff; - - // read out the artwork - switch (ls145) - { - case 0: pa = 0x00; break; - case 1 << 0: pa = (~m_io_line0->read()) & 0xff; break; - case 1 << 1: pa = (~m_io_line1->read()) & 0xff; break; - case 1 << 2: pa = (~m_io_line2->read()) & 0xff; break; - case 1 << 3: pa = (~m_io_line3->read()) & 0xff; break; - case 1 << 4: pa = (~m_io_line4->read()) & 0xff; break; - case 1 << 5: pa = (~m_io_line5->read()) & 0xff; break; - case 1 << 6: pa = (~m_io_line6->read()) & 0xff; break; - case 1 << 7: pa = (~m_io_line7->read()) & 0xff; break; - case 1 << 8: pa = (~m_io_line8->read()) & 0xff; break; - case 1 << 9: pa = (~m_io_line9->read()) & 0xff; break; - default: logerror("Keyboard is misconfigured, please report!: %04x", ls145); break; - } - if (VERBOSE && ls145 && pa) LOGSCAN("%s [%03x]%04x\n", FUNCNAME, ls145, pa); - - return ~pa; -} - -/* - PB0-PB3 is connected to U601 (74LS145) which select a column to scan - PB4-PB5 together with CA1, CA2, CB1 and CB2 are used for the printer interface - PB6-PB7 forms the cassette interface - - The serial bitbanging performs unreliably atm, can be poor original code or inexact CPU timing. - Best results is achieved with 8 bit at 9600 baud as follows: - - mame e100 -window -rs232 null_modem -bitbngr socket.127.0.0.1:4321 - - Start the favourite Telnet client towards the 4321 port and exit the startup screen of MAME. - At the "Esselte 100 #" prompt change to 8 bit communication and start the terminal mode: - - POKE (69,1) - TERM(9600) - - It is now possible to send characters from the Esselte screen to the Telnet terminal. When a - carriage return has been sent to the terminal the Esselte 100 goes into receiving mode until - it receives a carriage return from the terminal at which point it will start sending again. - - TODO: - - Fix key mapping of the Ctl-PI exit sequence to get out of the TERM mode. - - Fix timing issues for the PIA bit banging, could be related to that the CPU emulation is not - cycle exact or the ROM code is buggy -*/ - -#define SERIAL_OUT 0x10 -#define SERIAL_IN 0x20 -#define CASS_OUT 0x40 -#define CASS_IN 0x80 -WRITE8_MEMBER( e100_state::pia1_kbB_w ) -{ - uint8_t col; - - // Keyboard - // if (VERBOSE && data != m_pia1_B) LOGSCAN("%s(%02x)\n", FUNCNAME, data); - m_pia1_B = data; - col = data & 0x0f; - m_kbd_74145->write( col ); - - // Cassette - m_cassette->output(data & CASS_OUT ? 1.0 : -1.0); - - // Serial - m_rs232->write_txd(data & SERIAL_OUT ? 0 : 1); -} - -READ8_MEMBER( e100_state::pia1_kbB_r ) -{ - m_pia1_B &= ~(CASS_IN|SERIAL_IN); - - m_pia1_B |= (m_cassette->input() > 0.03 ? CASS_IN : 0x00); - - m_pia1_B |= (m_rs232->rxd_r() != 0 ? SERIAL_IN : 0x00); - - return m_pia1_B; -} - -READ_LINE_MEMBER(e100_state::pia1_ca1_r) -{ - // TODO: Make this a slot device for time meassurements - return ASSERT_LINE; // Default is handshake for serial port TODO: Fix RS 232 handshake as default -} - -READ_LINE_MEMBER(e100_state::pia1_cb1_r) -{ - return m_rs232->rxd_r(); -} - -WRITE_LINE_MEMBER(e100_state::pia1_ca2_w) -{ - // TODO: Make this a slot device to trigger time meassurements -} - -WRITE_LINE_MEMBER(e100_state::pia1_cb2_w) -{ - m_rs232->write_txd(!state); -} - -// This map is derived from info in "TEMAL 100 - teknisk manual Esselte 100" -void e100_state::e100_map(address_map &map) -{ - map(0x0000, 0x1fff).ram(); - map(0x8000, 0x87ff).rom().region("roms", 0); - map(0xc000, 0xc3ff).ram().share(m_vram); - map(0xc800, 0xc81f).rw(FUNC(e100_state::pia_r), FUNC(e100_state::pia_w)).mirror(0x07e0); - map(0xd000, 0xffff).rom().region("roms", 0x1000); -} - -/* E100 Input ports - * Four e100 keys are not mapped yet, - * - The redundant '*' on the keyboard together with the '\'' single quote, both on same e100 key - * - The 'E' key on the keypad, presumably used for calculator applications to remove the last entered number - * - The 'Break' key on rev2 will be mapped to NMI at some point, a recomended modification of the rev1 mother board - * - The 'REPT' key has a so far unknown function - */ -static INPUT_PORTS_START( e100 ) -/* Bits read on PIA1 A when issueing line number on PIA1 B bits 0-3 through a 74145 demultiplexer */ - PORT_START("LINE0") - PORT_BIT(0x01, IP_ACTIVE_LOW, IPT_UNUSED) - PORT_BIT(0x02, IP_ACTIVE_LOW, IPT_UNUSED) - PORT_BIT(0x04, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_SPACE) PORT_CHAR(' ') - PORT_BIT(0x08, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_LSHIFT) PORT_CODE(KEYCODE_RSHIFT) PORT_CHAR(UCHAR_SHIFT_1) - PORT_BIT(0x10, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_LCONTROL) PORT_CHAR(UCHAR_SHIFT_2) - PORT_BIT(0x20, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME("REPT") /* Not mapped yet */ - PORT_BIT(0x40, IP_ACTIVE_LOW, IPT_UNUSED) - PORT_BIT(0x80, IP_ACTIVE_LOW, IPT_UNUSED) - - PORT_START("LINE1") - PORT_BIT(0x01, IP_ACTIVE_LOW, IPT_UNUSED) - PORT_BIT(0x02, IP_ACTIVE_LOW, IPT_UNUSED) - PORT_BIT(0x04, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_Z) PORT_CHAR('z') PORT_CHAR('Z') - PORT_BIT(0x08, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_A) PORT_CHAR('a') PORT_CHAR('A') - PORT_BIT(0x10, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_Q) PORT_CHAR('q') PORT_CHAR('Q') - PORT_BIT(0x20, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_1) PORT_CHAR('1') PORT_CHAR('!') - PORT_BIT(0x40, IP_ACTIVE_LOW, IPT_UNUSED) - PORT_BIT(0x80, IP_ACTIVE_LOW, IPT_UNUSED) - - PORT_START("LINE2") - PORT_BIT(0x01, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_PLUS_PAD) PORT_CHAR('+') - PORT_BIT(0x02, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_MINUS_PAD) PORT_CHAR('-') - PORT_BIT(0x04, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_X) PORT_CHAR('x') PORT_CHAR('X') - PORT_BIT(0x08, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_S) PORT_CHAR('s') PORT_CHAR('S') - PORT_BIT(0x10, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_W) PORT_CHAR('w') PORT_CHAR('W') - PORT_BIT(0x20, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_2) PORT_CHAR('2') PORT_CHAR('"') - PORT_BIT(0x40, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_SLASH_PAD) PORT_CHAR('/') - PORT_BIT(0x80, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_ASTERISK) PORT_CHAR('*') - - PORT_START("LINE3") - PORT_BIT(0x01, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_COLON) PORT_CHAR(0xF6) PORT_CHAR(0xD6) - PORT_BIT(0x02, IP_ACTIVE_LOW, IPT_UNUSED) - PORT_BIT(0x04, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_STOP) PORT_CHAR('.') PORT_CHAR(':') - PORT_BIT(0x08, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_L) PORT_CHAR('l') PORT_CHAR('L') - PORT_BIT(0x10, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_O) PORT_CHAR('o') PORT_CHAR('O') - PORT_BIT(0x20, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_9) PORT_CHAR(')') PORT_CHAR('9') - PORT_BIT(0x40, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_P) PORT_CHAR('p') PORT_CHAR('P') - PORT_BIT(0x80, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_0) PORT_CHAR('0') PORT_CHAR('=') - - PORT_START("LINE4") - PORT_BIT(0x01, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_QUOTE) PORT_CHAR(0xE4) PORT_CHAR(0xC4) - PORT_BIT(0x02, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_SLASH) PORT_CHAR('-') PORT_CHAR('_') - PORT_BIT(0x04, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_COMMA) PORT_CHAR(',') PORT_CHAR(';') - PORT_BIT(0x08, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_K) PORT_CHAR('k') PORT_CHAR('K') - PORT_BIT(0x10, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_I) PORT_CHAR('i') PORT_CHAR('I') - PORT_BIT(0x20, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_8) PORT_CHAR('8') PORT_CHAR('(') - PORT_BIT(0x40, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_OPENBRACE) PORT_CHAR(0xE5) PORT_CHAR(0xC5) - PORT_BIT(0x80, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_MINUS) PORT_CHAR('+') PORT_CHAR('?') - - PORT_START("LINE5") - PORT_BIT(0x01, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME("'/*") /* No good mapping */ - PORT_BIT(0x02, IP_ACTIVE_LOW, IPT_UNUSED) - PORT_BIT(0x04, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_M) PORT_CHAR('m') PORT_CHAR('M') - PORT_BIT(0x08, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_J) PORT_CHAR('j') PORT_CHAR('J') - PORT_BIT(0x10, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_U) PORT_CHAR('u') PORT_CHAR('U') - PORT_BIT(0x20, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_7) PORT_CHAR('7') PORT_CHAR('/') - PORT_BIT(0x40, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_CLOSEBRACE) PORT_CHAR('^') - PORT_BIT(0x80, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME("PI") PORT_CODE(KEYCODE_ESC) PORT_CHAR(0x27) - - PORT_START("LINE6") - PORT_BIT(0x01, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_LEFT) PORT_CHAR(UCHAR_MAMEKEY(LEFT)) PORT_CHAR(UCHAR_MAMEKEY(UP)) - PORT_BIT(0x02, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_RIGHT) PORT_CHAR(UCHAR_MAMEKEY(RIGHT)) PORT_CHAR(UCHAR_MAMEKEY(DOWN)) - PORT_BIT(0x04, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_N) PORT_CHAR('n') PORT_CHAR('N') - PORT_BIT(0x08, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_H) PORT_CHAR('h') PORT_CHAR('H') - PORT_BIT(0x10, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_Y) PORT_CHAR('y') PORT_CHAR('Y') - PORT_BIT(0x20, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_6) PORT_CHAR('&') PORT_CHAR('6') - PORT_BIT(0x40, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_ENTER) PORT_CHAR('\r') - PORT_BIT(0x80, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_BACKSLASH2) PORT_CHAR('<') PORT_CHAR('>') - - PORT_START("LINE7") - PORT_BIT(0x01, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_1_PAD) PORT_CHAR(UCHAR_MAMEKEY(1_PAD)) - PORT_BIT(0x02, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_0_PAD) PORT_CHAR(UCHAR_MAMEKEY(0_PAD)) - PORT_BIT(0x04, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_B) PORT_CHAR('b') PORT_CHAR('B') - PORT_BIT(0x08, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_G) PORT_CHAR('g') PORT_CHAR('G') - PORT_BIT(0x10, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_T) PORT_CHAR('t') PORT_CHAR('T') - PORT_BIT(0x20, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_5) PORT_CHAR('5') PORT_CHAR('%') - PORT_BIT(0x40, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_4_PAD) PORT_CHAR(UCHAR_MAMEKEY(4_PAD)) - PORT_BIT(0x80, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_7_PAD) PORT_CHAR(UCHAR_MAMEKEY(7_PAD)) - - PORT_START("LINE8") - PORT_BIT(0x01, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_2_PAD) PORT_CHAR(UCHAR_MAMEKEY(3_PAD)) - PORT_BIT(0x02, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_DEL_PAD) PORT_CHAR(UCHAR_MAMEKEY(STOP)) - PORT_BIT(0x04, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_V) PORT_CHAR('v') PORT_CHAR('V') - PORT_BIT(0x08, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_F) PORT_CHAR('f') PORT_CHAR('F') - PORT_BIT(0x10, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_R) PORT_CHAR('r') PORT_CHAR('R') - PORT_BIT(0x20, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_4) PORT_CHAR('4') PORT_CHAR('$') - PORT_BIT(0x40, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_5_PAD) PORT_CHAR(UCHAR_MAMEKEY(5_PAD)) - PORT_BIT(0x80, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_8_PAD) PORT_CHAR(UCHAR_MAMEKEY(8_PAD)) - - PORT_START("LINE9") - PORT_BIT(0x01, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_3_PAD) PORT_CHAR(UCHAR_MAMEKEY(3_PAD)) - PORT_BIT(0x02, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_NAME("Keypad E") /* No good mapping */ - PORT_BIT(0x04, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_C) PORT_CHAR('c') PORT_CHAR('C') - PORT_BIT(0x08, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_D) PORT_CHAR('d') PORT_CHAR('D') - PORT_BIT(0x10, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_E) PORT_CHAR('e') PORT_CHAR('E') - PORT_BIT(0x20, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_3) PORT_CHAR('3') PORT_CHAR('#') - PORT_BIT(0x40, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_6_PAD) PORT_CHAR(UCHAR_MAMEKEY(6_PAD)) - PORT_BIT(0x80, IP_ACTIVE_LOW, IPT_KEYBOARD) PORT_CODE(KEYCODE_9_PAD) PORT_CHAR(UCHAR_MAMEKEY(9_PAD)) -INPUT_PORTS_END - -void e100_state::e100(machine_config &config) -{ - M6802(config, m_maincpu, XTAL(4'000'000)); - m_maincpu->set_ram_enable(false); - m_maincpu->set_addrmap(AS_PROGRAM, &e100_state::e100_map); - - /* Devices */ - TTL74145(config, m_kbd_74145, 0); - - /* --PIA inits----------------------- */ - /* 0xF883 0xC818 (PIA1 DDR A) = 0x00 - Port A all inputs */ - /* 0xF883 0xC818 (PIA2 DDR A) = 0x00 - Port A all inputs */ - /* 0xF883 0xC818 (PIA1 Control A) = 0x00 - Channel A IRQ disabled */ - /* 0xF883 0xC818 (PIA2 Control A) = 0x00 - Channel A IRQ disabled */ - /* 0xF886 0xC81A (PIA1 DDR B) = 0x00 - Port B all inputs */ - /* 0xF886 0xC81A (PIA2 DDR B) = 0x00 - Port B all inputs */ - /* 0xF886 0xC81A (PIA1 Control B) = 0x00 - Channel B IRQ disabled */ - /* 0xF886 0xC81A (PIA2 Control B) = 0x00 - Channel B IRQ disabled */ - /* 0xF88e 0xC80A (PIA1 DDR B) = 0x4F - Port B 5 outputs set to 0 */ - /* 0xF890 0xC812 (PIA2 DDR B) = 0xFF - Port B all outputs set to 0 */ - /* 0xF894 0xC818 (PIA1 Control A) = 0x34 - CA2 is low and lock DDRA */ - /* 0xF894 0xC818 (PIA2 Control A) = 0x34 - CA2 is low and lock DDRA */ - /* 0xF896 0xC818 (PIA1 Control B) = 0x34 - CB2 is low and lock DDRB */ - /* 0xF896 0xC818 (PIA2 Control B) = 0x34 - CB2 is low and lock DDRB */ - PIA6821(config, m_pia1, 0); - m_pia1->writepa_handler().set(FUNC(e100_state::pia1_kbA_w)); - m_pia1->readpa_handler().set(FUNC(e100_state::pia1_kbA_r)); - m_pia1->writepb_handler().set(FUNC(e100_state::pia1_kbB_w)); - m_pia1->readpb_handler().set(FUNC(e100_state::pia1_kbB_r)); - m_pia1->readca1_handler().set(FUNC(e100_state::pia1_ca1_r)); - m_pia1->readcb1_handler().set(FUNC(e100_state::pia1_cb1_r)); - m_pia1->ca2_handler().set(FUNC(e100_state::pia1_ca2_w)); - m_pia1->cb2_handler().set(FUNC(e100_state::pia1_cb2_w)); - - /* The optional second PIA enables the expansion port on CA1 and a software RTC with 50Hz resolution */ - PIA6821(config, m_pia2, 0); - m_pia2->irqa_handler().set_inputline("maincpu", M6800_IRQ_LINE); - - /* Serial port support */ - RS232_PORT(config, m_rs232, default_rs232_devices, nullptr); - - SPEAKER(config, "mono").front_center(); - /* Cassette support - E100 uses 300 baud Kansas City Standard with 1200/2400 Hz modulation */ - /* NOTE on usage: mame e100 -window -cass <wav file> -ui_active - * Once running enable/disable internal UI by pressing Scroll Lock in case it interferes with target keys - * Open the internal UI by pressing TAB and then select 'Tape Control' or use F2/Shift F2 for PLAY/PAUSE - * In order to use a wav file it has first to be created using TAB and select the 'File manager' - * Once created it may be given on the commandline or mounted via TAB and select - * E100 supports cassette through the 'LOAD' and 'SAVE' commands with no arguments - */ - CASSETTE(config, m_cassette); - m_cassette->set_default_state(CASSETTE_STOPPED | CASSETTE_SPEAKER_ENABLED | CASSETTE_MOTOR_ENABLED); - m_cassette->add_route(ALL_OUTPUTS, "mono", 0.05); - - /* screen TODO: simplify the screen config, look at zx.cpp */ - screen_device &screen(SCREEN(config, "screen", SCREEN_TYPE_RASTER)); - screen.set_raw(XTAL(4'000'000)/2, 265, 0, 265, 265, 0, 265); - screen.set_screen_update(FUNC(e100_state::screen_update)); - screen.set_palette("palette"); - PALETTE(config, "palette", palette_device::MONOCHROME); - - /* There is a 50Hz signal from the video circuit to CA1 which generates interrupts and drives a software RTC */ - TIMER(config, "video50hz").configure_periodic(FUNC(e100_state::rtc_w), attotime::from_hz(100)); /* Will be divided by two through toggle in the handler */ -} - -/* ROM sets from Didact was not versioned in general, so the numbering are just assumptions */ -ROM_START( e100 ) - ROM_REGION(0x4000, "roms", 0) - ROM_DEFAULT_BIOS("rev2-basic") - - /* TODO: Get the original ROMs */ - ROM_SYSTEM_BIOS(0, "rev1-basic", "Esselte 100 rev1 BASIC") - ROMX_LOAD( "e100r1u201.bin", 0x1000, 0x0800, NO_DUMP, ROM_BIOS(0) ) - ROMX_LOAD( "e100r1u202.bin", 0x1800, 0x0800, NO_DUMP, ROM_BIOS(0) ) - ROMX_LOAD( "e100r1u203.bin", 0x2000, 0x0800, NO_DUMP, ROM_BIOS(0) ) - ROMX_LOAD( "e100r1u204.bin", 0x2800, 0x0800, NO_DUMP, ROM_BIOS(0) ) - ROMX_LOAD( "e100r1u205.bin", 0x3000, 0x0800, NO_DUMP, ROM_BIOS(0) ) - ROMX_LOAD( "e100r1u206.bin", 0x3800, 0x0800, NO_DUMP, ROM_BIOS(0) ) - - /* This is a prototype ROM, commercial relase not verified. The prototype also have different keyboard and supports - more ram so might need to be split out as a clone later */ - ROM_SYSTEM_BIOS(1, "rev2-basic", "Esselte 100 rev2 BASIC") - ROMX_LOAD( "e100r2u201.bin", 0x0000, 0x2000, CRC(53513b67) SHA1(a91c5c32aead82dcc87db5d818ff286a7fc6a5c8), ROM_BIOS(1) ) - ROMX_LOAD( "e100r2u202.bin", 0x2000, 0x2000, CRC(eab3adf2) SHA1(ff3f5f5c8ea8732702a39cff76d0706ab6b751ee), ROM_BIOS(1) ) - - ROM_REGION(0x0800, "chargen",0) - ROM_LOAD( "e100u506.bin", 0x0000, 0x0800, CRC(fff9f288) SHA1(2dfb3eb551fe1ef67da328f61ef51ae8d1abdfb8) ) -ROM_END - -// YEAR NAME PARENT COMPAT MACHINE INPUT CLASS INIT COMPANY FULLNAME FLAGS -COMP( 1982, e100, 0, 0, e100, e100, e100_state, empty_init, "Didact AB", "Esselte 100", MACHINE_NO_SOUND_HW | MACHINE_SUPPORTS_SAVE) |