diff options
Diffstat (limited to 'src/mame/drivers/coinmstr.cpp')
-rw-r--r-- | src/mame/drivers/coinmstr.cpp | 1586 |
1 files changed, 0 insertions, 1586 deletions
diff --git a/src/mame/drivers/coinmstr.cpp b/src/mame/drivers/coinmstr.cpp deleted file mode 100644 index 3e5bf6a5685..00000000000 --- a/src/mame/drivers/coinmstr.cpp +++ /dev/null @@ -1,1586 +0,0 @@ -// license:BSD-3-Clause -// copyright-holders:Pierpaolo Prazzoli, Roberto Fresca, David Haywood -/*================================================================================== - - Coinmaster trivia and poker games. - - Preliminary driver by Pierpaolo Prazzoli - Additional work by Roberto Fresca. - - - TODO: - - is there extra colour info in attr3 for suprnudge 2 and pokeroul? - - is there colour intensity control? - - finish inputs - - finish question roms reading - - hook up all the PIAs - - -==================================================================================== - - Technical notes.... - - - There are at least 2 different boards. - - A) Unknown, with 2x 6264 RAM, mapped $C000-$DFFF and $E000-$FFFF. - B) 'PCB-001-POK', with 3x 6116 RAM, mapped $E000-$E7FF, $E800-$EFFF, and $F000-$F7FF. - - - All of them seems to have a connector for expansion (as Question Boards). - - - The I/O ports are a mess. Devices could be mapped in different ways. - - - Some trivia seems to accept 2 type of eproms for question roms: - 0x4000 or 0x8000 bytes long. This check is done with the 1st read - from the rom (I think from offset 0) and if it's 0x10, it means a - 0x4000 bytes eprom or if it's 0x20, it means a 0x8000 one. - Also supnudg2 only tests 0x20 as 1st byte, so accepting only - the 2nd type of eproms. - - - * Coinmaster Joker Poker (PCB-001-POK) - - AY-3-8912 - --------- - - - IO pins connected to DIP switches bank. - - Data pin connected to CPU data pin. - - BC1 goes to PAL IC12 pin 12 - - BC2 +5V - - BDIR goes to PAL IC12 pin 13 - - A8 +5V - - PIAs - ---- - - PIA0 (IC24) Port A --> Input. - PIA0 (IC24) Port B --> Output. - - PB output - PB0 to PB6 go to ULN2003 (IC19) then on PCB connector. - PB7 goes to ULM2003 (IC40) pin 1 then on PCB connector. - - - PIA1 (IC39) Port A --> Output. - PIA1 (IC39) Port B --> Output. - - PA0-PA7 go to 22 KOhm resistor, then a "pull up" capacitor, and then into the base of a transistor. - Collector connected to +5V, emitter is the output (1 KOhm pulldown), it goes into an ULN2803 - and then to PCB connector. 3 of that transistors outputs (input of the ULN) are connected - together and connected to another circuit that generate 2 more outputs on PCB connector. - (them seem unused no solder on the pcb connector) - - PB0 to PB6 goes to ULN2003 (IC34) then on PCB connector. - PB7 goes to ULM2003 (IC40) pin 2 then on PCB connector. - - - PIA2 (IC32) Port A --> Input. - PIA2 (IC32) Port B --> Output. - - PB0 to PB6 go to ULN2003 (IC31) then on PCB connector. - PB7 goes to ULM2003 (IC40) pin 3 then on PCB connector. - - -==================================================================================== - - Notes by game.... - - * Coinmaster Joker Poker - - - For Joker Poker (set 2), to start, pulse the KEY OUT (W) to wipe - the credits set at boot stage and reset the game. Otherwise you'll - get 116 credits due to input inconsistences. - - DIP switch #1 changes the minimal hand between "Jacks or Better" and - "Pair of Aces". - - There are two bookkeeping modes. I think these are for different levels - like operator and manager/supervisor. With the DIP switch #4 you can - switch between them. Is possible that this input would be meant to be - routed to a real supervisor key. - - Bookkeeping Types: - - "Weekly Meters" - - Just the operator bookkeeping mode. Only weekly credits in and out. - Erasable with CANCEL button. HOLD 5 shows the settings status. - - "Meter Totals" - - A complete bookkeeping, not erasable. Credits in/out, gamble in/out, - and complete statistics. In the principal bookkeeping screen, HOLD 1 - brings up a sort of values, and HOLD 4 shows the current stake limit - (keep pressing HOLD 4, and press HIGH and LOW to set the stake limit - between 10-100). - - Pressing DEAL/START, you can get the winning hands, occurrence of - spades, diamonds, clubs and hearts. also number of jokers dealt. - - With DIP switch #8 ON, you can enter a sort of test mode, where you - can set the cards using the HOLD buttons, and test the winning hands. - - DIP switch #7 is the 'Factory Install Switch'. It behaves like a PC - CMOS eraser jumper. Turning it ON and then OFF, you will erase the - 'Meter Totals' (all permanent meters and statistics). - - -==================================================================================*/ - -#include "emu.h" -#include "cpu/z80/z80.h" -#include "machine/6821pia.h" -#include "video/mc6845.h" -#include "sound/ay8910.h" -#include "machine/nvram.h" -#include "emupal.h" -#include "screen.h" -#include "speaker.h" -#include "tilemap.h" - - -#define MASTER_CLOCK XTAL(14'000'000) -#define CPU_CLOCK (MASTER_CLOCK/4) -#define SND_CLOCK (MASTER_CLOCK/8) - - -class coinmstr_state : public driver_device -{ -public: - coinmstr_state(const machine_config &mconfig, device_type type, const char *tag) - : driver_device(mconfig, type, tag), - m_videoram(*this, "videoram"), - m_attr_ram1(*this, "attr_ram1"), - m_attr_ram2(*this, "attr_ram2"), - m_attr_ram3(*this, "attr_ram3"), - m_maincpu(*this, "maincpu"), - m_gfxdecode(*this, "gfxdecode"), - m_palette(*this, "palette") { } - - required_shared_ptr<uint8_t> m_videoram; - required_shared_ptr<uint8_t> m_attr_ram1; - required_shared_ptr<uint8_t> m_attr_ram2; - required_shared_ptr<uint8_t> m_attr_ram3; - tilemap_t *m_bg_tilemap; - uint8_t m_question_adr[4]; - DECLARE_WRITE8_MEMBER(quizmstr_bg_w); - DECLARE_WRITE8_MEMBER(quizmstr_attr1_w); - DECLARE_WRITE8_MEMBER(quizmstr_attr2_w); - DECLARE_WRITE8_MEMBER(quizmstr_attr3_w); - DECLARE_READ8_MEMBER(question_r); - DECLARE_WRITE8_MEMBER(question_w); - DECLARE_READ8_MEMBER(ff_r); - void init_coinmstr(); - TILE_GET_INFO_MEMBER(get_bg_tile_info); - virtual void video_start() override; - uint32_t screen_update_coinmstr(screen_device &screen, bitmap_rgb32 &bitmap, const rectangle &cliprect); - required_device<cpu_device> m_maincpu; - required_device<gfxdecode_device> m_gfxdecode; - required_device<palette_device> m_palette; - void coinmstr(machine_config &config); - void pokeroul(machine_config &config); - void supnudg2(machine_config &config); - void jpcoin(machine_config &config); - void quizmstr(machine_config &config); - void trailblz(machine_config &config); - void coinmstr_map(address_map &map); - void jpcoin_io_map(address_map &map); - void jpcoin_map(address_map &map); - void pokeroul_io_map(address_map &map); - void quizmstr_io_map(address_map &map); - void supnudg2_io_map(address_map &map); - void trailblz_io_map(address_map &map); -}; - - -WRITE8_MEMBER(coinmstr_state::quizmstr_bg_w) -{ - uint8_t *videoram = m_videoram; - videoram[offset] = data; - - if(offset >= 0x0240) - m_bg_tilemap->mark_tile_dirty(offset - 0x0240); -} - - -static void coinmstr_set_pal(palette_device &palette, uint32_t paldat, int col) -{ - col = col *4; - - { - int r0, r1, r2, r3; - int g0, g1, g2, g3; - int b0, b1, b2, b3; - - r0 = (paldat & 0x1000) >> 12 ; - g0 = (paldat & 0x0800) >> 11 ; - b0 = (paldat & 0x0400) >> 10 ; - r1 = (paldat & 0x0200) >> 9 ; - g1 = (paldat & 0x0100) >> 8 ; - b1 = (paldat & 0x0080) >> 7 ; - - r2 = (paldat & 0x0020) >> 5 ; - g2 = (paldat & 0x0010) >> 4 ; - b2 = (paldat & 0x0008) >> 3 ; - r3 = (paldat & 0x0004) >> 2 ; - g3 = (paldat & 0x0002) >> 1 ; - b3 = (paldat & 0x0001) >> 0 ; - - - palette.set_pen_color(col+0, (b0 * 255) << 5, (g0 * 255) << 5, (r0 * 255) << 5); - palette.set_pen_color(col+2, (b1 * 255) << 5, (g1 * 255) << 5, (r1 * 255) << 5); - palette.set_pen_color(col+1, (b2 * 255) << 5, (g2 * 255) << 5, (r2 * 255) << 5); - palette.set_pen_color(col+3, (b3 * 255) << 5, (g3 * 255) << 5, (r3 * 255) << 5); - - } -} - - -WRITE8_MEMBER(coinmstr_state::quizmstr_attr1_w) -{ - m_attr_ram1[offset] = data; - - if(offset >= 0x0240) - { - // the later games also use attr3 for something.. - uint32_t paldata = (m_attr_ram1[offset] & 0x7f) | ((m_attr_ram2[offset] & 0x7f) << 7); - m_bg_tilemap->mark_tile_dirty(offset - 0x0240); - - coinmstr_set_pal(*m_palette, paldata, offset - 0x240); - - } -} - -WRITE8_MEMBER(coinmstr_state::quizmstr_attr2_w) -{ - m_attr_ram2[offset] = data; - - if(offset >= 0x0240) - { - // the later games also use attr3 for something.. - uint32_t paldata = (m_attr_ram1[offset] & 0x7f) | ((m_attr_ram2[offset] & 0x7f) << 7); - m_bg_tilemap->mark_tile_dirty(offset - 0x0240); - - coinmstr_set_pal(*m_palette, paldata, offset - 0x240); - - } -} - -WRITE8_MEMBER(coinmstr_state::quizmstr_attr3_w) -{ - m_attr_ram3[offset] = data; - - if(offset >= 0x0240) - m_bg_tilemap->mark_tile_dirty(offset - 0x0240); - -} - - -READ8_MEMBER(coinmstr_state::question_r) -{ - int address; - uint8_t *questions = memregion("user1")->base(); - - switch(m_question_adr[2]) - { - case 0x38: address = 0x00000; break; // m_question_adr[3] == 7 - case 0x39: address = 0x08000; break; // m_question_adr[3] == 7 - case 0x3a: address = 0x10000; break; // m_question_adr[3] == 7 - case 0x3b: address = 0x18000; break; // m_question_adr[3] == 7 - case 0x3c: address = 0x20000; break; // m_question_adr[3] == 7 - case 0x3d: address = 0x28000; break; // m_question_adr[3] == 7 - case 0x3e: address = 0x30000; break; // m_question_adr[3] == 7 - case 0x07: address = 0x38000; break; // m_question_adr[3] == 7 - case 0x0f: address = 0x40000; break; // m_question_adr[3] == 7 - case 0x17: address = 0x48000; break; // m_question_adr[3] == 7 - case 0x1f: address = 0x50000; break; // m_question_adr[3] == 7 - case 0x27: address = 0x58000; break; // m_question_adr[3] == 7 - case 0x2f: address = 0x60000; break; // m_question_adr[3] == 7 - case 0x37: address = 0x68000; break; // m_question_adr[3] == 7 - case 0x3f: address = 0x70000 + m_question_adr[3] * 0x8000; break; - - default: - address = 0; - logerror("unknown question rom # = %02X\n",m_question_adr[2]); - } - - if(m_question_adr[3] == 6 || m_question_adr[3] > 7) - logerror("question_adr[3] = %02X\n",m_question_adr[3]); - -/* - in these offsets they set 0x80... why? - - if( (m_question_adr[0] & 0x5f) == 0x00 || - (m_question_adr[0] & 0x5f) == 0x01 || - (m_question_adr[0] & 0x5f) == 0x0f || - (m_question_adr[0] & 0x5f) == 0x56 ) -*/ - - -// don't know... -// address |= ((m_question_adr[0] & 0x7f) << 8) | m_question_adr[1]; - address |= (m_question_adr[1] << 7) | (m_question_adr[0] & 0x7f); - - return questions[address]; -} - -WRITE8_MEMBER(coinmstr_state::question_w) -{ - if(data != m_question_adr[offset]) - { - logerror("offset = %d data = %02X\n",offset,data); - } - - m_question_adr[offset] = data; -} - -READ8_MEMBER(coinmstr_state::ff_r) -{ - return 0xff; -} - -// Common memory map - -void coinmstr_state::coinmstr_map(address_map &map) -{ - map(0x0000, 0xbfff).rom(); - map(0xc000, 0xdfff).ram(); - map(0xe000, 0xe7ff).ram().w(FUNC(coinmstr_state::quizmstr_bg_w)).share("videoram"); - map(0xe800, 0xefff).ram().w(FUNC(coinmstr_state::quizmstr_attr1_w)).share("attr_ram1"); - map(0xf000, 0xf7ff).ram().w(FUNC(coinmstr_state::quizmstr_attr2_w)).share("attr_ram2"); - map(0xf800, 0xffff).ram().w(FUNC(coinmstr_state::quizmstr_attr3_w)).share("attr_ram3"); -} - -/* 2x 6462 hardware C000-DFFF & E000-FFFF */ -void coinmstr_state::jpcoin_map(address_map &map) -{ - map(0x0000, 0xbfff).rom(); - map(0xc000, 0xdfff).ram(); /* 2x 6462 hardware */ - map(0xe000, 0xe7ff).ram().w(FUNC(coinmstr_state::quizmstr_bg_w)).share("videoram"); - map(0xe800, 0xefff).ram().w(FUNC(coinmstr_state::quizmstr_attr1_w)).share("attr_ram1"); - map(0xf000, 0xf7ff).ram().w(FUNC(coinmstr_state::quizmstr_attr2_w)).share("attr_ram2"); - map(0xf800, 0xffff).ram().w(FUNC(coinmstr_state::quizmstr_attr3_w)).share("attr_ram3"); -} - -// Different I/O mappping for every game - -void coinmstr_state::quizmstr_io_map(address_map &map) -{ - map.unmap_value_high(); - map.global_mask(0xff); - map(0x00, 0x00).r(FUNC(coinmstr_state::question_r)); - map(0x00, 0x03).w(FUNC(coinmstr_state::question_w)); - map(0x40, 0x41).w("aysnd", FUNC(ay8910_device::address_data_w)); - map(0x41, 0x41).r("aysnd", FUNC(ay8910_device::data_r)); - map(0x48, 0x4b).rw("pia0", FUNC(pia6821_device::read), FUNC(pia6821_device::write)); - map(0x50, 0x53).nopr(); - map(0x50, 0x53).nopw(); - map(0x58, 0x5b).rw("pia2", FUNC(pia6821_device::read), FUNC(pia6821_device::write)); - map(0x70, 0x70).w("crtc", FUNC(mc6845_device::address_w)); - map(0x71, 0x71).w("crtc", FUNC(mc6845_device::register_w)); - map(0xc0, 0xc3).nopr(); - map(0xc0, 0xc3).nopw(); -} - -void coinmstr_state::trailblz_io_map(address_map &map) -{ - map.global_mask(0xff); - map(0x00, 0x00).r(FUNC(coinmstr_state::question_r)); - map(0x00, 0x03).w(FUNC(coinmstr_state::question_w)); - map(0x40, 0x40).w("crtc", FUNC(mc6845_device::address_w)); - map(0x41, 0x41).w("crtc", FUNC(mc6845_device::register_w)); - map(0x48, 0x49).w("aysnd", FUNC(ay8910_device::address_data_w)); - map(0x49, 0x49).r("aysnd", FUNC(ay8910_device::data_r)); - map(0x50, 0x53).rw("pia0", FUNC(pia6821_device::read), FUNC(pia6821_device::write)); //? - map(0x60, 0x63).rw("pia1", FUNC(pia6821_device::read), FUNC(pia6821_device::write)); - map(0x70, 0x73).rw("pia2", FUNC(pia6821_device::read), FUNC(pia6821_device::write)); - map(0xc1, 0xc3).nopw(); -} - -void coinmstr_state::supnudg2_io_map(address_map &map) -{ -/* -out 40 -in 40 -in 43 -out 43 -out 42 - -out 48 CRTC -out 49 CRTC - -in 53 -out 53 -out 52 -out 50 - -in 69 -out 69 -out 68 -in 6B -out 6B -out 6A - -out C1 -out C2 -out C3 - -E0-E1 CRTC -*/ - map.unmap_value_high(); - map.global_mask(0xff); - map(0x00, 0x00).r(FUNC(coinmstr_state::question_r)); - map(0x00, 0x03).w(FUNC(coinmstr_state::question_w)); - map(0x48, 0x48).w("crtc", FUNC(mc6845_device::address_w)); - map(0x49, 0x49).w("crtc", FUNC(mc6845_device::register_w)); - map(0x40, 0x43).rw("pia0", FUNC(pia6821_device::read), FUNC(pia6821_device::write)); - map(0x50, 0x53).rw("pia1", FUNC(pia6821_device::read), FUNC(pia6821_device::write)); - map(0x68, 0x6b).rw("pia2", FUNC(pia6821_device::read), FUNC(pia6821_device::write)); - map(0x78, 0x79).w("aysnd", FUNC(ay8910_device::address_data_w)); - map(0x79, 0x79).r("aysnd", FUNC(ay8910_device::data_r)); - map(0xc0, 0xc1).nopr(); - map(0xc0, 0xc3).nopw(); -} - -void coinmstr_state::pokeroul_io_map(address_map &map) -{ -/* -out 68 -in 69 - -in 6B -out 6B -out 6A - -in 59 -out 59 -out 58 -out 5B -out 5A - -in 7B -out 7B -out 7A - -E0-E1 CRTC -*/ - map.global_mask(0xff); - map(0x40, 0x40).w("crtc", FUNC(mc6845_device::address_w)); - map(0x41, 0x41).w("crtc", FUNC(mc6845_device::register_w)); - map(0x48, 0x49).w("aysnd", FUNC(ay8910_device::address_data_w)); - map(0x49, 0x49).r("aysnd", FUNC(ay8910_device::data_r)); - map(0x58, 0x5b).rw("pia0", FUNC(pia6821_device::read), FUNC(pia6821_device::write)); /* confirmed */ - map(0x68, 0x6b).rw("pia1", FUNC(pia6821_device::read), FUNC(pia6821_device::write)); /* confirmed */ - map(0x78, 0x7b).rw("pia2", FUNC(pia6821_device::read), FUNC(pia6821_device::write)); /* confirmed */ - map(0xc0, 0xc1).r(FUNC(coinmstr_state::ff_r)); /* needed to boot */ -} - -void coinmstr_state::jpcoin_io_map(address_map &map) -{ -/* -out C0 -in C1 - -in C8 -out CA - -in D0 -out D1 -out D2 - -in DA -out DA - -E0-E1 CRTC -*/ - map.global_mask(0xff); - map(0xe0, 0xe0).w("crtc", FUNC(mc6845_device::address_w)); /* confirmed */ - map(0xe1, 0xe1).w("crtc", FUNC(mc6845_device::register_w)); /* confirmed */ - map(0xc0, 0xc1).w("aysnd", FUNC(ay8910_device::address_data_w)); - map(0xc1, 0xc1).r("aysnd", FUNC(ay8910_device::data_r)); - map(0xc8, 0xcb).rw("pia0", FUNC(pia6821_device::read), FUNC(pia6821_device::write)); /* confirmed */ - map(0xd0, 0xd3).rw("pia1", FUNC(pia6821_device::read), FUNC(pia6821_device::write)); - map(0xd8, 0xdb).rw("pia2", FUNC(pia6821_device::read), FUNC(pia6821_device::write)); /* confirmed */ -// map(0xc0, 0xc1).r(FUNC(coinmstr_state::ff_r)); /* needed to boot */ - map(0xc4, 0xc4).r(FUNC(coinmstr_state::ff_r)); /* needed to boot */ -} - - -static INPUT_PORTS_START( quizmstr ) - PORT_START("PIA0.A") - PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_UNKNOWN ) - PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_SERVICE1) PORT_NAME("Bookkeeping") PORT_TOGGLE /* Button 2 for second page, Button 3 erases data */ - PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_COIN3 ) - PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_COIN1 ) - PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_COIN2 ) - PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_SERVICE) PORT_TOGGLE - PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_BUTTON2 ) - PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_BUTTON3 ) - - PORT_START("PIA0.B") - PORT_DIPNAME( 0x01, 0x01, "PIA0.B" ) - PORT_DIPSETTING( 0x01, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x02, 0x02, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x02, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x04, 0x04, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x04, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x08, 0x08, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x08, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x10, 0x10, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x10, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x20, 0x20, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x20, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x40, 0x40, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x40, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x80, 0x80, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x80, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - - PORT_START("PIA1.A") - PORT_DIPNAME( 0x01, 0x01, "PIA1.A" ) - PORT_DIPSETTING( 0x01, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x02, 0x02, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x02, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x04, 0x04, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x04, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x08, 0x08, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x08, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x10, 0x10, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x10, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x20, 0x20, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x20, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x40, 0x40, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x40, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x80, 0x80, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x80, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - - PORT_START("PIA1.B") - PORT_DIPNAME( 0x01, 0x01, "PIA1.B" ) - PORT_DIPSETTING( 0x01, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x02, 0x02, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x02, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x04, 0x04, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x04, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x08, 0x08, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x08, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x10, 0x10, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x10, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x20, 0x20, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x20, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x40, 0x40, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x40, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x80, 0x80, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x80, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - - PORT_START("PIA2.A") - PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_BUTTON4 ) - PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_BUTTON5 ) - PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_BUTTON6 ) - PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_START1 ) - PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_START2 ) - PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_BUTTON1 ) - /* If 0x40 is HIGH the DIP Test Mode does work but bookkeeping shows always 0's */ - /* If 0x40 is LOW Bookkeeping does work, but the second page (selected categories) is missing */ - PORT_BIT( 0x40, IP_ACTIVE_HIGH, IPT_UNKNOWN ) - PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_UNKNOWN ) - - PORT_START("PIA2.B") - PORT_DIPNAME( 0x01, 0x01, "PIA2.B" ) - PORT_DIPSETTING( 0x01, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x02, 0x02, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x02, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x04, 0x04, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x04, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x08, 0x08, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x08, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x10, 0x10, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x10, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x20, 0x20, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x20, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x40, 0x40, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x40, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x80, 0x80, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x80, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - - PORT_START("DSW1") - PORT_DIPNAME( 0x01, 0x01, DEF_STR( Coin_A ) ) - PORT_DIPSETTING( 0x00, DEF_STR( 2C_1C ) ) - PORT_DIPSETTING( 0x01, DEF_STR( 1C_1C ) ) - PORT_DIPNAME( 0x02, 0x02, "4-02" ) - PORT_DIPSETTING( 0x02, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x04, 0x04, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x04, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x08, 0x08, "Test Mode" ) - PORT_DIPSETTING( 0x08, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x10, 0x10, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x10, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x20, 0x20, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x20, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x40, 0x40, "NVRAM Reset?" ) - PORT_DIPSETTING( 0x40, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x80, 0x80, "Self Test" ) - PORT_DIPSETTING( 0x00, DEF_STR( No )) - PORT_DIPSETTING( 0x80, DEF_STR( Yes )) -INPUT_PORTS_END - -static INPUT_PORTS_START( trailblz ) - PORT_START("PIA0.A") - PORT_DIPNAME( 0x01, 0x01, "PIA0.A" ) - PORT_DIPSETTING( 0x01, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x02, 0x02, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x02, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x04, 0x04, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x04, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x08, 0x08, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x08, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x10, 0x10, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x10, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x20, 0x20, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x20, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x40, 0x40, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x40, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x80, 0x80, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x80, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - - PORT_START("PIA0.B") - PORT_DIPNAME( 0x01, 0x01, "PIA0.B" ) - PORT_DIPSETTING( 0x01, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x02, 0x02, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x02, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x04, 0x04, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x04, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x08, 0x08, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x08, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x10, 0x10, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x10, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x20, 0x20, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x20, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x40, 0x40, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x40, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x80, 0x80, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x80, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - - PORT_START("PIA1.A") - PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_START1 ) - PORT_DIPNAME( 0x02, 0x02, "1" ) - PORT_DIPSETTING( 0x02, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x04, 0x04, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x04, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_BUTTON3 ) PORT_NAME("Cont") - PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_BUTTON2 ) PORT_NAME("Pass") - PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_BUTTON1 ) PORT_NAME("Sel") - PORT_DIPNAME( 0x40, 0x40, "Show Refill" ) - PORT_DIPSETTING( 0x40, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x80, 0x80, "Show Stats" ) - PORT_DIPSETTING( 0x80, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - - PORT_START("PIA1.B") - PORT_DIPNAME( 0x01, 0x01, "PIA1.B" ) - PORT_DIPSETTING( 0x01, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x02, 0x02, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x02, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x04, 0x04, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x04, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x08, 0x08, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x08, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x10, 0x10, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x10, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x20, 0x20, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x20, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x40, 0x40, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x40, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x80, 0x80, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x80, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - - PORT_START("PIA2.A") - PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_COIN1 ) - PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_COIN2 ) - PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_COIN3 ) - PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_COIN4 ) - PORT_DIPNAME( 0x10, 0x10, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x10, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_SERVICE1 ) - PORT_DIPNAME( 0x40, 0x40, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x40, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_SERVICE( 0x80, IP_ACTIVE_LOW ) - - PORT_START("PIA2.B") - PORT_DIPNAME( 0x01, 0x01, "PIA2.B" ) - PORT_DIPSETTING( 0x01, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x02, 0x02, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x02, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x04, 0x04, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x04, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x08, 0x08, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x08, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x10, 0x10, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x10, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x20, 0x20, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x20, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x40, 0x40, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x40, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x80, 0x80, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x80, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - - PORT_START("DSW1") - PORT_DIPNAME( 0x01, 0x01, "4" ) - PORT_DIPSETTING( 0x01, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x02, 0x02, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x02, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x04, 0x04, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x04, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x08, 0x08, "Tests" ) - PORT_DIPSETTING( 0x08, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x10, 0x10, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x10, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x20, 0x20, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x20, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x40, 0x40, "NVRAM Reset?" ) - PORT_DIPSETTING( 0x40, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x80, 0x80, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x80, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) -INPUT_PORTS_END - -static INPUT_PORTS_START( supnudg2 ) /* need to find the button 'B' to be playable */ - PORT_INCLUDE ( trailblz ) - - PORT_MODIFY("PIA0.A") - PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_COIN1 ) PORT_NAME("1 Pound (5 credits)") // coin x 5 - PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_COIN2 ) PORT_NAME("50 Pence (2.5 credits)") // coin x 2.5 - PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_COIN3 ) PORT_NAME("20 Pence (1 credit)") // coin x 1 - PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_COIN4 ) PORT_NAME("10 Pence (0.5 credit)") // coin x 0.5 - PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_OTHER ) PORT_CODE(KEYCODE_A) PORT_NAME("PIA0.A_0x10") - PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_OTHER ) PORT_CODE(KEYCODE_S) PORT_NAME("PIA0.A_0x20") - PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_OTHER ) PORT_CODE(KEYCODE_D) PORT_NAME("PIA0.A_0x40") - PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_OTHER ) PORT_CODE(KEYCODE_F) PORT_NAME("PIA0.A_0x80") - - PORT_MODIFY("PIA1.A") - PORT_DIPNAME( 0x01, 0x01, "PIA1.A" ) - PORT_DIPSETTING( 0x01, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x02, 0x02, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x02, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x04, 0x04, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x04, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x08, 0x08, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x08, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x10, 0x10, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x10, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x20, 0x20, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x20, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x40, 0x40, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x40, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x80, 0x80, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x80, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - - PORT_MODIFY("PIA2.A") - PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_BUTTON4 ) PORT_CODE(KEYCODE_N) PORT_NAME("Pass") - PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_BUTTON1 ) PORT_CODE(KEYCODE_Z) PORT_NAME("Button A") - PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_BUTTON3 ) PORT_CODE(KEYCODE_C) PORT_NAME("Button C") - PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_START1 ) PORT_CODE(KEYCODE_1) PORT_NAME("Start") - PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_SERVICE ) PORT_CODE(KEYCODE_T) PORT_NAME("Test/Check Question Board") - PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_SERVICE ) PORT_CODE(KEYCODE_0) PORT_NAME("Short Term Meters") PORT_TOGGLE - PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_SERVICE ) PORT_CODE(KEYCODE_9) PORT_NAME("Refill") PORT_TOGGLE - PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_OTHER ) PORT_CODE(KEYCODE_Q) PORT_NAME("Remote Credits x5") - - PORT_MODIFY("DSW1") - PORT_DIPNAME( 0x01, 0x01, "4" ) - PORT_DIPSETTING( 0x01, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x02, 0x02, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x02, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x04, 0x04, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x04, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x08, 0x08, "Tests?" ) - PORT_DIPSETTING( 0x08, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x10, 0x10, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x10, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x20, 0x20, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x20, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x40, 0x40, "NVRAM Reset?" ) - PORT_DIPSETTING( 0x40, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x80, 0x80, "First Install (DIL 8)" ) - PORT_DIPSETTING( 0x80, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) -INPUT_PORTS_END - -static INPUT_PORTS_START( pokeroul ) - PORT_START("PIA0.A") - PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_BUTTON5 ) PORT_NAME("Cancel / Collect") PORT_CODE(KEYCODE_N) - PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_BUTTON4 ) PORT_NAME("Hold 1 & 5 (auto?)") PORT_CODE(KEYCODE_Z) - PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_BUTTON3 ) PORT_NAME("Hold 2 / Bet / Half Gamble / Previous Hand") PORT_CODE(KEYCODE_X) - PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_BUTTON1 ) PORT_NAME("Deal / Draw / Gamble") PORT_CODE(KEYCODE_1) - PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_BUTTON2 ) PORT_NAME("Auto Hold") PORT_CODE(KEYCODE_M) - PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_SERVICE ) PORT_NAME("Short Term Meters") PORT_TOGGLE PORT_CODE(KEYCODE_0) - PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_SERVICE ) PORT_NAME("Refill Mode") PORT_TOGGLE PORT_CODE(KEYCODE_9) - PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_OTHER ) PORT_NAME("0-8") PORT_CODE(KEYCODE_S) - - PORT_START("PIA0.B") - PORT_DIPNAME( 0x01, 0x01, "PIA0.B" ) - PORT_DIPSETTING( 0x01, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x02, 0x02, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x02, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x04, 0x04, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x04, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x08, 0x08, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x08, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x10, 0x10, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x10, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x20, 0x20, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x20, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x40, 0x40, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x40, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x80, 0x80, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x80, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - - PORT_START("PIA1.A") - PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_COIN1 ) PORT_IMPULSE (2) - PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_COIN2 ) PORT_IMPULSE (2) - PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_OTHER ) PORT_NAME("PIA1.A_3") PORT_CODE(KEYCODE_Q) - PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_OTHER ) PORT_NAME("PIA1.A_4") PORT_CODE(KEYCODE_W) - PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_OTHER ) PORT_NAME("PIA1.A_5") PORT_CODE(KEYCODE_E) - PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_OTHER ) PORT_NAME("PIA1.A_6") PORT_CODE(KEYCODE_R) - PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_OTHER ) PORT_NAME("PIA1.A_7") PORT_CODE(KEYCODE_T) - PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_OTHER ) PORT_NAME("PIA1.A_8") PORT_CODE(KEYCODE_Y) - - PORT_START("PIA1.B") - PORT_DIPNAME( 0x01, 0x01, "PIA1.B" ) - PORT_DIPSETTING( 0x01, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x02, 0x02, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x02, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x04, 0x04, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x04, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x08, 0x08, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x08, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x10, 0x10, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x10, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x20, 0x20, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x20, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x40, 0x40, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x40, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x80, 0x80, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x80, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - - PORT_START("PIA2.A") - PORT_DIPNAME( 0x01, 0x01, "PIA2.A" ) - PORT_DIPSETTING( 0x01, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x02, 0x02, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x02, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x04, 0x04, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x04, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x08, 0x08, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x08, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x10, 0x10, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x10, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x20, 0x20, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x20, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x40, 0x40, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x40, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x80, 0x80, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x80, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) -/* PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_UNKNOWN ) - PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_UNKNOWN ) - PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_UNKNOWN ) - PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_UNKNOWN ) - PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_UNKNOWN ) - PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_UNKNOWN ) - PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_UNKNOWN ) - PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_UNKNOWN ) -*/ - PORT_START("PIA2.B") - PORT_DIPNAME( 0x01, 0x01, "PIA2.B" ) - PORT_DIPSETTING( 0x01, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x02, 0x02, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x02, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x04, 0x04, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x04, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x08, 0x08, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x08, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x10, 0x10, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x10, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x20, 0x20, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x20, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x40, 0x40, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x40, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x80, 0x80, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x80, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - - PORT_START("DSW1") - PORT_DIPNAME( 0x01, 0x01, "DSW1" ) - PORT_DIPSETTING( 0x01, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x02, 0x02, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x02, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x04, 0x04, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x04, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x08, 0x08, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x08, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x10, 0x10, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x10, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x20, 0x20, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x20, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x40, 0x40, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x40, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x80, 0x80, "Factory Install Switch" ) - PORT_DIPSETTING( 0x80, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) -INPUT_PORTS_END - -static INPUT_PORTS_START( jpcoin ) - PORT_START("PIA0.A") - PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_POKER_HOLD1 ) PORT_NAME("Hold 1") - PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_GAMBLE_BOOK ) PORT_NAME("Bookkeeping") PORT_TOGGLE - PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_COIN3 ) PORT_NAME("credits x10") // credits x10 - PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_COIN1 ) PORT_NAME("credits x1") // credits x1 - PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_COIN2 ) PORT_NAME("credits x5") // credits x5 - PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_GAMBLE_KEYIN ) PORT_NAME("Remote x100") - PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_START1 ) PORT_NAME("Deal/Start") - PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_POKER_HOLD5 ) PORT_NAME("Hold 5") - - PORT_START("PIA0.B") - PORT_DIPNAME( 0x01, 0x01, "PIA0.B" ) - PORT_DIPSETTING( 0x01, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x02, 0x02, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x02, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x04, 0x04, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x04, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x08, 0x08, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x08, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x10, 0x10, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x10, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x20, 0x20, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x20, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x40, 0x40, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x40, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x80, 0x80, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x80, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - - PORT_START("PIA1.A") - PORT_DIPNAME( 0x01, 0x01, "PIA1.A" ) - PORT_DIPSETTING( 0x01, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x02, 0x02, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x02, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x04, 0x04, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x04, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x08, 0x08, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x08, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x10, 0x10, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x10, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x20, 0x20, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x20, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x40, 0x40, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x40, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x80, 0x80, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x80, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - - PORT_START("PIA1.B") - PORT_DIPNAME( 0x01, 0x01, "PIA1.B" ) - PORT_DIPSETTING( 0x01, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x02, 0x02, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x02, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x04, 0x04, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x04, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x08, 0x08, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x08, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x10, 0x10, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x10, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x20, 0x20, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x20, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x40, 0x40, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x40, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x80, 0x80, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x80, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - - PORT_START("PIA2.A") - PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_POKER_HOLD4 ) PORT_NAME("Hold 4") - PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_POKER_HOLD3 ) PORT_NAME("Hold 3") - PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_POKER_HOLD2 ) PORT_NAME("Hold 2") - PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_GAMBLE_LOW ) PORT_NAME("Low") PORT_CODE(KEYCODE_S) - PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_GAMBLE_HIGH ) PORT_NAME("High") PORT_CODE(KEYCODE_A) - PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_POKER_CANCEL ) PORT_NAME("Cancel") - PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_GAMBLE_KEYOUT ) PORT_NAME("Key Out") - PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_GAMBLE_BET ) PORT_NAME("Bet") PORT_IMPULSE(2) - - PORT_START("PIA2.B") - PORT_DIPNAME( 0x01, 0x01, "PIA2.B" ) - PORT_DIPSETTING( 0x01, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x02, 0x02, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x02, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x04, 0x04, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x04, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x08, 0x08, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x08, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x10, 0x10, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x10, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x20, 0x20, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x20, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x40, 0x40, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x40, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x80, 0x80, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x80, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - - PORT_START("DSW1") - PORT_DIPNAME( 0x01, 0x01, "Minimum Hand" ) - PORT_DIPSETTING( 0x01, "Pair of Aces" ) - PORT_DIPSETTING( 0x00, "Jacks or Better" ) - PORT_DIPNAME( 0x02, 0x02, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x02, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x04, 0x04, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x04, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x08, 0x08, "Bookkeeping Type" ) - PORT_DIPSETTING( 0x08, "Weekly Meters" ) - PORT_DIPSETTING( 0x00, "Meter Totals" ) - PORT_DIPNAME( 0x10, 0x10, "Bonus 7s and 9s" ) - PORT_DIPSETTING( 0x10, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x20, 0x20, DEF_STR( Unknown ) ) - PORT_DIPSETTING( 0x20, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x40, 0x40, "Factory Install Switch (Erase Meter Totals)" ) - PORT_DIPSETTING( 0x40, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - PORT_DIPNAME( 0x80, 0x80, "Test Mode" ) - PORT_DIPSETTING( 0x80, DEF_STR( Off ) ) - PORT_DIPSETTING( 0x00, DEF_STR( On ) ) - -INPUT_PORTS_END - - -static const gfx_layout charlayout = -{ - 8,8, - RGN_FRAC(1,2), - 2, - { RGN_FRAC(0,2), RGN_FRAC(1,2) }, - { 0, 1, 2, 3, 4, 5, 6, 7 }, - { 0*8, 1*8, 2*8, 3*8, 4*8, 5*8, 6*8, 7*8 }, - 8*8 -}; - -static GFXDECODE_START( gfx_coinmstr ) - GFXDECODE_ENTRY( "gfx1", 0, charlayout, 0, 46*32 ) -GFXDECODE_END - - -TILE_GET_INFO_MEMBER(coinmstr_state::get_bg_tile_info) -{ - uint8_t *videoram = m_videoram; - int tile = videoram[tile_index + 0x0240]; - int color = tile_index; - - tile |= (m_attr_ram1[tile_index + 0x0240] & 0x80) << 1; - tile |= (m_attr_ram2[tile_index + 0x0240] & 0x80) << 2; - - tile |= (m_attr_ram3[tile_index + 0x0240] & 0x03) << (6+4); - - SET_TILE_INFO_MEMBER(0, tile, color, 0); -} - -void coinmstr_state::video_start() -{ - m_bg_tilemap = &machine().tilemap().create(*m_gfxdecode, tilemap_get_info_delegate(*this, FUNC(coinmstr_state::get_bg_tile_info)), TILEMAP_SCAN_ROWS, 8, 8, 46, 32); -} - -uint32_t coinmstr_state::screen_update_coinmstr(screen_device &screen, bitmap_rgb32 &bitmap, const rectangle &cliprect) -{ - m_bg_tilemap->draw(screen, bitmap, cliprect, 0, 0); - return 0; -} - -void coinmstr_state::coinmstr(machine_config &config) -{ - Z80(config, m_maincpu, CPU_CLOCK); // 7 MHz. - m_maincpu->set_addrmap(AS_PROGRAM, &coinmstr_state::coinmstr_map); - m_maincpu->set_vblank_int("screen", FUNC(coinmstr_state::irq0_line_hold)); - - pia6821_device &pia0(PIA6821(config, "pia0", 0)); - pia0.readpa_handler().set_ioport("PIA0.A"); - pia0.readpb_handler().set_ioport("PIA0.B"); - - pia6821_device &pia1(PIA6821(config, "pia1", 0)); - pia1.readpa_handler().set_ioport("PIA1.A"); - pia1.set_port_a_input_overrides_output_mask(0xff); - pia1.readpb_handler().set_ioport("PIA1.B"); - - pia6821_device &pia2(PIA6821(config, "pia2", 0)); - pia2.readpa_handler().set_ioport("PIA2.A"); - pia2.readpb_handler().set_ioport("PIA2.B"); - - /* video hardware */ - screen_device &screen(SCREEN(config, "screen", SCREEN_TYPE_RASTER)); - screen.set_refresh_hz(60); - screen.set_vblank_time(ATTOSECONDS_IN_USEC(0)); - screen.set_size(64*8, 64*8); - screen.set_visarea(0*8, 46*8-1, 0*8, 32*8-1); - screen.set_screen_update(FUNC(coinmstr_state::screen_update_coinmstr)); - - GFXDECODE(config, m_gfxdecode, m_palette, gfx_coinmstr); - PALETTE(config, m_palette).set_entries(46*32*4); - - mc6845_device &crtc(MC6845(config, "crtc", 14000000 / 16)); - crtc.set_screen("screen"); - crtc.set_show_border_area(false); - crtc.set_char_width(8); - - /* sound hardware */ - SPEAKER(config, "mono").front_center(); - - ay8910_device &aysnd(AY8910(config, "aysnd", SND_CLOCK)); - aysnd.port_a_read_callback().set_ioport("DSW1"); - aysnd.add_route(ALL_OUTPUTS, "mono", 0.25); -} - -void coinmstr_state::quizmstr(machine_config &config) -{ - coinmstr(config); - m_maincpu->set_addrmap(AS_IO, &coinmstr_state::quizmstr_io_map); -} - -void coinmstr_state::trailblz(machine_config &config) -{ - coinmstr(config); - m_maincpu->set_addrmap(AS_IO, &coinmstr_state::trailblz_io_map); -} - -void coinmstr_state::supnudg2(machine_config &config) -{ - coinmstr(config); - m_maincpu->set_addrmap(AS_IO, &coinmstr_state::supnudg2_io_map); -} - -void coinmstr_state::pokeroul(machine_config &config) -{ - coinmstr(config); - m_maincpu->set_addrmap(AS_IO, &coinmstr_state::pokeroul_io_map); -} - -void coinmstr_state::jpcoin(machine_config &config) -{ - coinmstr(config); - m_maincpu->set_addrmap(AS_PROGRAM, &coinmstr_state::jpcoin_map); - m_maincpu->set_addrmap(AS_IO, &coinmstr_state::jpcoin_io_map); -// NVRAM(config, "nvram", nvram_device::DEFAULT_ALL_0); -} - -/* - -Quizmaster -Coinmaster, 1985 - -PCB Layout ----------- - - -PCB 001-POK 5MBYTE MEMORY EXPANSION -|--------------------------------------------------| |------------------------------| -| ULN2803 6821 | | | -| | | | -| NPC_QM4_11.IC45 | |GESCHICH2.IC19 GESCHICH1.IC20| -| ULN2003 6821 | | | -| ULN2003 NPC_QM4_21.IC41 | | * GESCHICH3.IC18| -| | | | -|7 6821 | |POPMUSIK2.IC15 POPMUSIK1.IC16| -|2 HD465055 | | | -|W | | * * | -|A | | | -|Y AY3-8912 6116 | |SPORT2.IC11 SPORT1.IC12 | -| | | | -| | |SPORT4.IC9 SPORT3.IC10 | -| BATTERY 6116 | | | -| DSW1(8) NM_QM4_11.IC9 | |GEOGRAPH2.IC7 GEOGRAPH1.IC8 | -| NE555 | | | -| VOL NP_QM4_21.IC6 6116 | | * * | -| LM380 PAL | | | -| | |ALLGEME2.IC3 ALLGEME1.IC4 | -| PAL | | | -| | | * ALLGEME3.IC2 | -| PAL | | | -| 14MHz | | | -| Z80 CN1 | | CN2 | -| | | PAL | -|--------------------------------------------------| |------------------------------| -CN1/2 is connector for top ROM board * - unpopulated socket - - -*/ - -ROM_START( quizmstr ) - ROM_REGION( 0x10000, "maincpu", ROMREGION_ERASEFF ) - ROM_LOAD( "nm_qm4_11.ic9", 0x0000, 0x4000, CRC(3a233bf0) SHA1(7b91b6f19093e67dd5513a000138421d4ef6f0af) ) - ROM_LOAD( "np_qm4_21.ic6", 0x4000, 0x4000, CRC(a1cd39e4) SHA1(420b0726577471c762ae470bc2138c035f295ad9) ) - /* 0x8000 - 0xbfff empty */ - - ROM_REGION( 0x4000, "gfx1", 0 ) - ROM_LOAD( "npc_qm4_11.ic45", 0x0000, 0x2000, CRC(ed48582a) SHA1(0aa2434a43af2990b8ad1cd3fc9f2e5e962f99c7) ) - ROM_LOAD( "npc_qm4_21.ic41", 0x2000, 0x2000, CRC(b67b0183) SHA1(018cabace593e795edfe914cdaedb9ebdf158567) ) - - ROM_REGION( 0xa0000, "user1", ROMREGION_ERASEFF ) /* Question roms */ - /* empty ic1 */ - ROM_LOAD( "allgeme3.ic2", 0x08000, 0x8000, CRC(e9ead7f0) SHA1(c0b8e4e7905f31b74c8d217f0afc91f73d52927b) ) - ROM_LOAD( "allgeme2.ic3", 0x10000, 0x8000, CRC(ac4d2ee8) SHA1(3a64fba8a24ae2e8bfd9d1c27804342e1779bcf6) ) - ROM_LOAD( "allgeme1.ic4", 0x18000, 0x8000, CRC(896e619b) SHA1(6f0faf0ae206f20387024a4a426b3e92429b3b1d) ) - /* empty ic5 */ - /* empty ic6 */ - ROM_LOAD( "geograph2.ic7", 0x30000, 0x8000, CRC(d809eeb6) SHA1(c557cecd3dd641a9c293f1865a423dafcd71af82) ) - ROM_LOAD( "geograph1.ic8", 0x38000, 0x8000, CRC(8984e83c) SHA1(d22c02e9297f804f8560e2e46793e4b6654d0785) ) - ROM_LOAD( "sport4.ic9", 0x40000, 0x8000, CRC(3c37de48) SHA1(bee26e9b15cec0b8e81af59810db17a8f2bdc299) ) - ROM_LOAD( "sport3.ic10", 0x48000, 0x8000, CRC(24abe1e7) SHA1(77373b1fafa4b117b3a1e4c6e8b530e0bb3b4f42) ) - ROM_LOAD( "sport2.ic11", 0x50000, 0x8000, CRC(26645e8e) SHA1(4922dcd417f7d098aaaa6a0320ed1d3e488d3e63) ) - ROM_LOAD( "sport1.ic12", 0x58000, 0x8000, CRC(7be41758) SHA1(8e6452fd902d25a73d3fa89bd7b4c5563669cc92) ) - /* empty ic13 */ - /* empty ic14 */ - ROM_LOAD( "popmusik2.ic15", 0x70000, 0x8000, CRC(d3b9ea70) SHA1(0a92ecdc4e2ddd3c0f40682a46a88bc617829481) ) - ROM_LOAD( "popmusik1.ic16", 0x78000, 0x8000, CRC(685f047e) SHA1(c0254130d57f60435a70effe6376e0cb3f50223f) ) - /* empty ic17 */ - ROM_LOAD( "geschich3.ic18", 0x88000, 0x8000, CRC(26c3ceec) SHA1(bf6fd24576c6159bf7730b04d2ac451bfcf3f757) ) - ROM_LOAD( "geschich2.ic19", 0x90000, 0x8000, CRC(387d166e) SHA1(14edac9ef550ce64fd81567520f3009612aa7221) ) - ROM_LOAD( "geschich1.ic20", 0x98000, 0x8000, CRC(bf4c097f) SHA1(eb14e7bad713d3b03fa3978a7f0087312517cf9e) ) -ROM_END - - -ROM_START( trailblz ) - ROM_REGION( 0x10000, "maincpu", ROMREGION_ERASEFF ) - ROM_LOAD( "1-4.09", 0x0000, 0x4000, CRC(7c34749c) SHA1(3847188a734b32979f376f51f74dff050b610dfb) ) - ROM_LOAD( "2-4.06", 0x4000, 0x4000, CRC(81a9809b) SHA1(4d2bfd5223713a9e2e15130a3176118d400ee63e) ) - /* 0x8000 - 0xbfff empty */ - - ROM_REGION( 0x4000, "gfx1", 0 ) - ROM_LOAD( "1-2.45", 0x0000, 0x2000, CRC(b4a807b1) SHA1(f00a4790adb0c25917a0dc8c98c9b65526304fd3) ) - ROM_LOAD( "2-2.41", 0x2000, 0x2000, CRC(756dd230) SHA1(6d6f440bf1f48cc33d5e46cfc645809d5f8b1f3a) ) - - ROM_REGION( 0xa0000, "user1", ROMREGION_ERASEFF ) /* Question roms */ - ROM_LOAD( "questions.bin", 0x00000, 0xa0000, NO_DUMP ) -ROM_END - - -ROM_START( supnudg2 ) - ROM_REGION( 0x10000, "maincpu", 0 ) - ROM_LOAD( "u3.bin", 0x0000, 0x8000, CRC(ed04e2cc) SHA1(7d90a588cca2d113487710e897771f9d99e37e62) ) - ROM_LOAD( "u4.bin", 0x8000, 0x8000, CRC(0551e859) SHA1(b71640097cc75b78f3013f0e77de328bf1a205b1) ) - - ROM_REGION( 0x10000, "gfx1", 0 ) - ROM_LOAD( "u25.bin", 0x0000, 0x8000, CRC(1f7cef5e) SHA1(3abc31d400a0f5dc29c70d8aac42fd6302290cc9) ) - ROM_LOAD( "u23.bin", 0x8000, 0x8000, CRC(726a48ac) SHA1(cd17840067294812edf5bfa88d71fc967388df8e) ) - - ROM_REGION( 0xa0000, "user1", 0 ) /* Question roms */ - ROM_LOAD( "q1.bin", 0x00000, 0x8000, CRC(245d679a) SHA1(2d3fbed8c1b3d0bffe7f3bd9088e0a5d207654c7) ) - ROM_LOAD( "q2.bin", 0x08000, 0x8000, CRC(e41ae8fb) SHA1(526c7b60e6ee4dfe05bbabf0e1e986e04ac2f544) ) - ROM_LOAD( "q3.bin", 0x10000, 0x8000, CRC(692218a2) SHA1(b9548dd835d9f3fb3e09bd018c7f9cbecafaee28) ) - ROM_LOAD( "q4.bin", 0x18000, 0x8000, CRC(ce4be482) SHA1(4fd8f24d22d3f1789fc728445cbc5339ed454bb4) ) - ROM_LOAD( "q5.bin", 0x20000, 0x8000, CRC(805672bf) SHA1(0fa68cad0d1c2b11a04a364b5ff64facfa573bbc) ) - ROM_LOAD( "q6.bin", 0x28000, 0x8000, CRC(b4405848) SHA1(5f8ca8b017966e6f358f603efde83f45897f3476) ) - ROM_LOAD( "q7.bin", 0x30000, 0x8000, CRC(32329b78) SHA1(114f097678be734355b8f36f6af7f1cb75ece191) ) - ROM_LOAD( "q8.bin", 0x38000, 0x8000, CRC(25c2aa26) SHA1(7f95553bf98381ced086b6606345bef62fe89a3a) ) - ROM_LOAD( "q9.bin", 0x40000, 0x8000, CRC(c98cb15a) SHA1(7d12064c2bcb34668299cadae3072c7f8434c405) ) - ROM_LOAD( "q10.bin", 0x48000, 0x8000, CRC(0c6c2df5) SHA1(49c92e498a0556032bb8ca56ff5afb9f69a80b3f) ) - ROM_LOAD( "q11.bin", 0x50000, 0x8000, CRC(1c53a264) SHA1(c10cc32b032bd4f890497bdc942e7e8c75ea1d6f) ) - ROM_LOAD( "q12.bin", 0x58000, 0x8000, CRC(c9535bff) SHA1(9c9873642c62971f805dc629f8d1006e35a675f9) ) - ROM_LOAD( "q13.bin", 0x60000, 0x8000, CRC(7a9b9f61) SHA1(7e39fef67fc3c29604ae68358e01330cf5130c06) ) - ROM_LOAD( "q14.bin", 0x68000, 0x8000, CRC(ec35e800) SHA1(0e0ca6fec760f31f464b282a1d7341cc4a29c064) ) - ROM_LOAD( "q15.bin", 0x70000, 0x8000, CRC(9f3738eb) SHA1(e841958f37167e7f9adcd3c965d31e2b7e02f52c) ) - ROM_LOAD( "q16.bin", 0x78000, 0x8000, CRC(af92277c) SHA1(093079fab28e3de443b640d2777cc2980b20af6c) ) - ROM_LOAD( "q17.bin", 0x80000, 0x8000, CRC(522fd485) SHA1(6c2a2626c00015962c460eac0dcb46ea263a4a23) ) - ROM_LOAD( "q18.bin", 0x88000, 0x8000, CRC(54d50510) SHA1(2a8ad2a2e1735f9c7d606b99b3653f823f09d1e8) ) - ROM_LOAD( "q19.bin", 0x90000, 0x8000, CRC(30aa2ff5) SHA1(4a2b4fc9c0c5cab3d374ee4738152209589e0807) ) - ROM_LOAD( "q20.bin", 0x98000, 0x8000, CRC(0845b450) SHA1(c373839ee1ad983e2df41cb22f625c14972372b0) ) -ROM_END - -/* - - Poker Roulette (c) 1990 Coinmaster - - - Hardware notes: - - CPU: 1x z80 - RAM: 2x 6264 - I/O: 3x 6821 PIAs - CRTC: 1x 6845 - SND: 1x ay-3-8912 - Xtal: 1x 14MHz. - - - Dev notes: - - 2x gfx banks, switched by bit4 of attr RAM. - -*/ - -ROM_START( pokeroul ) - ROM_REGION( 0x10000, "maincpu", 0 ) - ROM_LOAD( "poker1.ic3", 0x0000, 0x8000, CRC(bfe78d09) SHA1(7cc0f57714ff808a41ce20027a283e5dff60f752) ) - ROM_LOAD( "poker2.ic4", 0x8000, 0x8000, CRC(34c1b55c) SHA1(fa562d230a57dce3fff176c21c86b461a02749f6) ) - - ROM_REGION( 0x10000, "gfx1", 0 ) - ROM_LOAD( "027c1.00_e14.7.88.ic25", 0x0000, 0x8000, CRC(719f9879) SHA1(122e2689a21a22713f938e3bf6cfb72c60fb9a16) ) - ROM_LOAD( "027c1.01_e14.7.88.ic23", 0x8000, 0x8000, CRC(71e5a2fc) SHA1(c28efcea1cf6c9872e70ff191932e3cdb5618917) ) -ROM_END - -/* - Looks like the 2x 6264, since checks C000-DFFF - - BP 1D0 (PIAS init) - BP 1102 (calls) - - Output C0 - Input C1 - - Input C8 - Output C9 (masked) - Output CA - - Input D0 - Output D1 - Output D2 - Input D3 - Output DA - - Output E0 CRTC - Output E1 CRTC - -*/ -ROM_START( jpcoin ) - ROM_REGION( 0x10000, "maincpu", 0 ) - ROM_LOAD( "2.bin", 0x0000, 0x2000, CRC(67e1aa60) SHA1(32301f60a7325f23047d84bb1e9416ea05753493) ) - ROM_LOAD( "1.bin", 0x4000, 0x2000, CRC(6c79e430) SHA1(56e026329ea6aba122d1f66c375bf4c3cc829feb) ) - - ROM_REGION( 0x8000, "gfx1", 0 ) - ROM_LOAD( "4.bin", 0x0000, 0x4000, CRC(2bac1c0b) SHA1(3e45fc38ed6d332e1d49b2b66bf8001610f914c5) ) // 1ST AND 2ND HALF IDENTICAL - ROM_LOAD( "3.bin", 0x4000, 0x4000, CRC(4984053e) SHA1(e0f7c56160f48f7b1c2c407f448c13a191770adc) ) // 1ST AND 2ND HALF IDENTICAL -ROM_END - -/* -Joker Poker from Coinmaster. -It boots to an error screen, seems that PIAs are mapped at different offsets - -Original Coinmaster PCB -Silkscreened: COINMASTER (c) 1884 -and VIDEO BOARD STOCK No PCB-001-POK - -1x SGS Z8400AB1 (Z80 A CPU). -1x MC68A45P CRTC -3x HD68B21P PIAs. - -3x Hitachi HM6116 (2048 X 8bit) RAM - -1x AY-3-8912. -1x LM380 AMP - -1x 3.6 Volts, 100 mAh battery. -1x 8 DIP switches bank. -1x 14 MHz. Xtal. - -CPU CLK 3.5Mhz 14/4 -AY3-89-12 CLK 1.75Mhz 14/8 - -*/ - -ROM_START( jpcoin2 ) - ROM_REGION( 0x10000, "maincpu", 0 ) - ROM_LOAD( "jp88-1.ic9", 0x0000, 0x4000, CRC(60d31daf) SHA1(204537887388f1a174d1a09331186182be31e8ee) ) - - ROM_REGION( 0x4000, "gfx1", 0 ) - ROM_LOAD( "jp88-3.ic45", 0x0000, 0x2000, CRC(f2f92a7e) SHA1(ce6f6fd5af0049269357527650b51a1016caf636) ) - ROM_LOAD( "jp88-2.ic41", 0x2000, 0x2000, CRC(57db61b2) SHA1(a3bc2056866cbb9fdca52e62f2ff4a952d1d7484) ) -ROM_END - - -/************************* -* Driver Init * -*************************/ - -void coinmstr_state::init_coinmstr() -{ - uint8_t *rom = memregion("user1")->base(); - int length = memregion("user1")->bytes(); - std::vector<uint8_t> buf(length); - - memcpy(&buf[0],rom,length); - - for (int i = 0; i < length; i++) - { - int adr = bitswap<24>(i, 23,22,21,20,19,18,17,16,15, 14,8,7,2,5,12,10,9,11,13,3,6,0,1,4); - rom[i] = bitswap<8>(buf[adr],3,2,4,1,5,0,6,7); - } -} - - -/************************* -* Game Drivers * -*************************/ - -// YEAR NAME PARENT MACHINE INPUT STATE INIT ROT COMPANY FULLNAME FLAGS -GAME( 1985, quizmstr, 0, quizmstr, quizmstr, coinmstr_state, init_coinmstr, ROT0, "Loewen Spielautomaten", "Quizmaster (German)", MACHINE_UNEMULATED_PROTECTION ) -GAME( 1987, trailblz, 0, trailblz, trailblz, coinmstr_state, init_coinmstr, ROT0, "Coinmaster", "Trail Blazer", MACHINE_UNEMULATED_PROTECTION | MACHINE_NOT_WORKING ) // or Trail Blazer 2 ? -GAME( 1989, supnudg2, 0, supnudg2, supnudg2, coinmstr_state, init_coinmstr, ROT0, "Coinmaster", "Super Nudger II - P173 (Version 5.21)", MACHINE_UNEMULATED_PROTECTION | MACHINE_NOT_WORKING ) -GAME( 1990, pokeroul, 0, pokeroul, pokeroul, coinmstr_state, empty_init, ROT0, "Coinmaster", "Poker Roulette (Version 8.22)", MACHINE_NOT_WORKING ) -GAME( 1985, jpcoin, 0, jpcoin, jpcoin, coinmstr_state, empty_init, ROT0, "Coinmaster", "Joker Poker (Coinmaster set 1)", 0 ) -GAME( 1990, jpcoin2, 0, jpcoin, jpcoin, coinmstr_state, empty_init, ROT0, "Coinmaster", "Joker Poker (Coinmaster, Amusement Only)", 0 ) |