summaryrefslogtreecommitdiffstatshomepage
path: root/src/mame/drivers/berzerk.c
diff options
context:
space:
mode:
Diffstat (limited to 'src/mame/drivers/berzerk.c')
-rw-r--r--src/mame/drivers/berzerk.c86
1 files changed, 51 insertions, 35 deletions
diff --git a/src/mame/drivers/berzerk.c b/src/mame/drivers/berzerk.c
index b2ec8e1f923..7f2b10bb0ec 100644
--- a/src/mame/drivers/berzerk.c
+++ b/src/mame/drivers/berzerk.c
@@ -877,13 +877,45 @@ static READ8_HANDLER( moonwarp_p1_r )
ret= dialoutput | ((direction==1)?0x10:0) | buttons;
- //fprintf(stderr, "dialread: %02x, lastdialread: %02x, dialoutput: %02x, spinner ret is %02x\n", dialread, lastdialread, dialoutput, ret);
+ //fprintf(stderr, "dialread1: %02x, lastdialread: %02x, dialoutput: %02x, spinner ret is %02x\n", dialread, lastdialread, dialoutput, ret);
+ lastdialread = dialread;
+ return ret;
+}
+
+static READ8_HANDLER( moonwarp_p2_r )
+{
+ // This seems to be the same type of dial as the later 'moon war 2' set uses
+ // see http://www.cityofberwyn.com/schematics/stern/MoonWar_opto.tiff for schematic
+ // I.e. a 74ls161 counts from 0 to 15 which is the absolute number of bars passed on the quadrature
+ // one difference is it lacks the strobe input (does it?), which if not active causes
+ // the dial input to go open bus. This is used in moon war 2 to switch between player 1
+ // and player 2 dials.
+ static int lastdialread = -1;
+ int dialread = input_port_read(space->machine,"P2_DIAL");
+ static int dialoutput = 0;
+ static int direction = 0;
+ UINT8 ret;
+ UINT8 buttons = (input_port_read(space->machine,"P2")&0xe0);
+ // following two lines are to fix the direction being wrong for one read
+ // when the 0xFF<->0x00 border is passed on IPT_DIAL
+ if ((lastdialread > 250) && (dialread < 5)) direction = 1;
+ else if ((lastdialread < 5) && (dialread > 250)) direction = 0;
+ else if ((lastdialread - dialread) < 0) direction = 1;
+ else if ((lastdialread - dialread) > 0) direction = 0;
+ // note when lastdialread and dialread are the same direction is left alone.
+ dialoutput += abs(dialread - lastdialread);
+ dialoutput &= 0xf;
+
+ ret= dialoutput | ((direction==1)?0x10:0) | buttons;
+
+ //fprintf(stderr, "dialread2: %02x, lastdialread: %02x, dialoutput: %02x, spinner ret is %02x\n", dialread, lastdialread, dialoutput, ret);
lastdialread = dialread;
return ret;
}
static INPUT_PORTS_START( moonwarp )
PORT_START("P1")
+ //PORT_BIT( 0x1f, IP_ACTIVE_HIGH, IPT_SPECIAL ) // spinner/dial
PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_BUTTON3 )
PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_BUTTON2 )
PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_BUTTON1 )
@@ -895,38 +927,22 @@ static INPUT_PORTS_START( moonwarp )
PORT_START("SYSTEM")
PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_START1 )
PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_START2 )
- PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_UNUSED )
- PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_BUTTON4 )
+ PORT_BIT( 0x04, IP_ACTIVE_HIGH, IPT_UNUSED ) // is wired high for upright harness, low for cocktail; if high, cocktail dipswitch is ignored.
+ PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_BUTTON4 ) // Hyper flip button is common for both players in cocktail mode.
PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_UNUSED )
PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_COIN3 )
PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_COIN2 )
PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_COIN1 )
- PORT_START("P2") // doesn't seem to be read by moonwarp at all?
- PORT_DIPNAME( 0x01, 0x00, "P2")
- PORT_DIPSETTING( 0x01, DEF_STR( Off ) )
- PORT_DIPSETTING( 0x00, DEF_STR( On ) )
- PORT_DIPNAME( 0x02, 0x00, DEF_STR( Unknown ) )
- PORT_DIPSETTING( 0x02, DEF_STR( Off ) )
- PORT_DIPSETTING( 0x00, DEF_STR( On ) )
- PORT_DIPNAME( 0x04, 0x00, DEF_STR( Unknown ) )
- PORT_DIPSETTING( 0x04, DEF_STR( Off ) )
- PORT_DIPSETTING( 0x00, DEF_STR( On ) )
- PORT_DIPNAME( 0x08, 0x00, DEF_STR( Unknown ) )
- PORT_DIPSETTING( 0x08, DEF_STR( Off ) )
- PORT_DIPSETTING( 0x00, DEF_STR( On ) )
- PORT_DIPNAME( 0x10, 0x00, DEF_STR( Unknown ) )
- PORT_DIPSETTING( 0x10, DEF_STR( Off ) )
- PORT_DIPSETTING( 0x00, DEF_STR( On ) )
- PORT_DIPNAME( 0x20, 0x00, DEF_STR( Unknown ) )
- PORT_DIPSETTING( 0x20, DEF_STR( Off ) )
- PORT_DIPSETTING( 0x00, DEF_STR( On ) )
- PORT_DIPNAME( 0x40, 0x00, DEF_STR( Unknown ) )
- PORT_DIPSETTING( 0x40, DEF_STR( Off ) )
- PORT_DIPSETTING( 0x00, DEF_STR( On ) )
- PORT_DIPNAME( 0x80, 0x00, DEF_STR( Unknown ) )
- PORT_DIPSETTING( 0x80, DEF_STR( Off ) )
- PORT_DIPSETTING( 0x00, DEF_STR( On ) )
+ PORT_START("P2")
+ //PORT_BIT( 0x1f, IP_ACTIVE_HIGH, IPT_SPECIAL ) PORT_COCKTAIL // spinner/dial
+ PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_BUTTON3 ) PORT_COCKTAIL
+ PORT_BIT( 0x40, IP_ACTIVE_LOW, IPT_BUTTON2 ) PORT_COCKTAIL
+ PORT_BIT( 0x80, IP_ACTIVE_LOW, IPT_BUTTON1 ) PORT_COCKTAIL
+
+ PORT_START("P2_DIAL")
+ PORT_BIT( 0xff, 0x0, IPT_DIAL ) PORT_SENSITIVITY(25) PORT_KEYDELTA(5) PORT_COCKTAIL
+
/* fake port for monitor type */
PORT_START(MONITOR_TYPE_PORT_TAG)
@@ -970,9 +986,9 @@ static INPUT_PORTS_START( moonwarp )
PORT_DIPNAME( 0x04, 0x00, DEF_STR( Unknown ) ) PORT_DIPLOCATION("F3:3")
PORT_DIPSETTING( 0x04, DEF_STR( Off ) )
PORT_DIPSETTING( 0x00, DEF_STR( On ) )
- PORT_DIPNAME( 0x08, 0x00, "Reverse Spinner" ) PORT_DIPLOCATION("F3:4")
- PORT_DIPSETTING( 0x00, DEF_STR( Off ) )
- PORT_DIPSETTING( 0x08, DEF_STR( On ) )
+ PORT_DIPNAME( 0x08, 0x00, "Spinner Direction" ) PORT_DIPLOCATION("F3:4")
+ PORT_DIPSETTING( 0x08, DEF_STR( Reverse ) )
+ PORT_DIPSETTING( 0x00, DEF_STR( Standard ) )
PORT_DIPNAME( 0x10, 0x00, DEF_STR( Unknown ) ) PORT_DIPLOCATION("F3:5")
PORT_DIPSETTING( 0x10, DEF_STR( Off ) )
PORT_DIPSETTING( 0x00, DEF_STR( On ) )
@@ -1011,10 +1027,9 @@ static INPUT_PORTS_START( moonwarp )
PORT_DIPNAME( 0x40, 0x00, DEF_STR( Unknown ) ) PORT_DIPLOCATION("F5:7")
PORT_DIPSETTING( 0x40, DEF_STR( Off ) )
PORT_DIPSETTING( 0x00, DEF_STR( On ) )
- PORT_DIPNAME( 0x80, 0x00, DEF_STR( Unknown ) ) PORT_DIPLOCATION("F5:8") // I'm nearly sure this is the cocktail/upright select bit but I can't make it consistently work in cocktail mode. Are there more bits which are depended on?
- PORT_DIPSETTING( 0x80, DEF_STR( Off ) )
- PORT_DIPSETTING( 0x00, DEF_STR( On ) )
-
+ PORT_DIPNAME( 0x80, 0x00, DEF_STR( Cabinet ) ) PORT_DIPLOCATION("F5:8")
+ PORT_DIPSETTING( 0x00, DEF_STR( Upright ) )
+ PORT_DIPSETTING( 0x80, DEF_STR( Cocktail ) )
PORT_START("F6")
BERZERK_COINAGE(3, F6)
@@ -1209,6 +1224,7 @@ static DRIVER_INIT( moonwarp )
{
const address_space *io = cputag_get_address_space(machine, "maincpu", ADDRESS_SPACE_IO);
memory_install_read8_handler (io, 0x48, 0x48, 0, 0, moonwarp_p1_r);
+ memory_install_read8_handler (io, 0x4a, 0x4a, 0, 0, moonwarp_p2_r);
}
/*************************************