summaryrefslogtreecommitdiffstatshomepage
path: root/src/mame/drivers/arkanoid.c
diff options
context:
space:
mode:
Diffstat (limited to 'src/mame/drivers/arkanoid.c')
-rw-r--r--src/mame/drivers/arkanoid.c36
1 files changed, 18 insertions, 18 deletions
diff --git a/src/mame/drivers/arkanoid.c b/src/mame/drivers/arkanoid.c
index 38866d17267..0a10ada7356 100644
--- a/src/mame/drivers/arkanoid.c
+++ b/src/mame/drivers/arkanoid.c
@@ -53,7 +53,7 @@ PCB Layout
Note an original Taito Arkanoid PCB is approximately 10" square and is
painted white. The copper traces are not visible. The part type and
-location of each component is printed in green on the PCB on top of the
+location of each component is printed in green on the PCB on top of the
white paint.
The following MCU images were tested on an original Arkanoid PCB using sets
@@ -61,13 +61,13 @@ The following MCU images were tested on an original Arkanoid PCB using sets
(1) MCU image with CRC 0x389a8cfb
(2) MCU image with CRC 0x515d77b6
-An MCU found on a Tournament Arkanoid PCB was an unprotected type MC68705P3
-and when read the CRC matched (1). So we can assume the MCUs for Arkanoid and
+An MCU found on a Tournament Arkanoid PCB was an unprotected type MC68705P3
+and when read the CRC matched (1). So we can assume the MCUs for Arkanoid and
Tournament Arkanoid are the same.... or are at least interchangeable and work.
-"Tetris (D.R. Korea)" in MAME is a hack on an original Arkanoid PCB.
-The hack can be undone and returned to Arkanoid simply by removing the mod
-wires on the YM2149, replacing the ROMs with Arkanoid ROMs and replacing
+"Tetris (D.R. Korea)" in MAME is a hack on an original Arkanoid PCB.
+The hack can be undone and returned to Arkanoid simply by removing the mod
+wires on the YM2149, replacing the ROMs with Arkanoid ROMs and replacing
the PC030CM which was removed. A working Arkanoid 68705 MCU is also required.
The above 'tested' images can be used.
@@ -110,7 +110,7 @@ K1100181A (ROMSTAR version added sticker)
Notes:
Z80 - Zilog Z0840006 CPU. Clock input 6.000MHz (12/2)
YM2149F - Yamaha YM2149F software-controlled sound generator (SSG). Clock input 1.5MHz (12/8)
- A75_06.IC14 - Motorola MC68705P5 micro-controller. Clock input 3.000MHz (12/4). Labelled 'A75 06' for
+ A75_06.IC14 - Motorola MC68705P5 micro-controller. Clock input 3.000MHz (12/4). Labelled 'A75 06' for
ROMSTAR version. Note original Taito version 68705 and Tournament Arkanoid MCUs work fine.
A75_* - 27C256 EPROMs labelled 'A75 xx'. xx = 01, 03, 04, 05 etc. See ROM loading in the src for exact ROM usage.
A75-0* - MMI 63S241 bipolar PROMs. Compatible with MB7116, 7621, DM74S571N etc
@@ -126,8 +126,8 @@ Notes:
Note the G connector is the 22-way edge connector.
The Japanese manual states (translated to English).....
********
- The coin-SW of this Main PC Board does not work without wiring coin meter to
- coin meter pins of the G-connector.
+ The coin-SW of this Main PC Board does not work without wiring coin meter to
+ coin meter pins of the G-connector.
You need to modify as follows in case coin meter is not connected to Main PC Board.
Coin System A ..... Wire jumper JP4 on Main PC Board. Coin meter not used.
Coin System B ..... Wire jumper JP3 on Main PC Board. Coin meter used.
@@ -137,8 +137,8 @@ Notes:
--------------
HSync - 15.625kHz
VSync - 59.185Hz
-
-
+
+
POWER connector H
-----------------
1 Ground
@@ -153,8 +153,8 @@ Notes:
10 Post
11 NC
12 NC
-
-
+
+
22-way edge connector G
-----------------------
@@ -188,9 +188,9 @@ COIN LOCKOUT (A) |10 L | COIN LOCKOUT (B)
Note about spinner controller
-----------------------------
-This game requires a geared spinner to operate correctly. A trackball or other optical
+This game requires a geared spinner to operate correctly. A trackball or other optical
controller or home-made spinner built from a PC mouse will work but the player moves too
-slowly and the game is unplayable. The Taito geared spinner moves the optical wheel *very*
+slowly and the game is unplayable. The Taito geared spinner moves the optical wheel *very*
fast to ensure the player moves fast enough to follow and return the ball easily. The ratio of
the control knob rotation to the optical wheel rotation is 1:20 so for one rotation of the
control knob the optical wheel rotates 20 times.
@@ -202,14 +202,14 @@ Pin 2 - +5V
Pin 3 - Ground
Pin 4 - Right
-These pins are listed from the Japanese Taito manual and have been tested to be correct with
+These pins are listed from the Japanese Taito manual and have been tested to be correct with
the real Taito Arkanoid spinner.
The US ROMSTAR manual lists pin 4 as left and pin 1 as right. This information is probably
incorrect. Pins 2 and 3 are the same.
Spinner PCB Layout
------------------
-J9000024A
+J9000024A
K9000060A
|-----------|
| OPTO |
@@ -224,7 +224,7 @@ Notes:
POWER - Power input connector. Pin 1 is on the right.
S - Screw positions to show orientation of the PCB with reference to the power connector pin 1
-
+
DIP Switches
+-----------------------------+--------------------------------+
|FACTORY DEFAULT = * | 1 2 3 4 5 6 7 8 |