summaryrefslogtreecommitdiffstatshomepage
path: root/src/mame/drivers/aquarius.cpp
diff options
context:
space:
mode:
Diffstat (limited to 'src/mame/drivers/aquarius.cpp')
-rw-r--r--src/mame/drivers/aquarius.cpp424
1 files changed, 0 insertions, 424 deletions
diff --git a/src/mame/drivers/aquarius.cpp b/src/mame/drivers/aquarius.cpp
deleted file mode 100644
index fddd71c9a5d..00000000000
--- a/src/mame/drivers/aquarius.cpp
+++ /dev/null
@@ -1,424 +0,0 @@
-// license:BSD-3-Clause
-// copyright-holders:Nathan Woods
-/***************************************************************************
-
- Mattel Aquarius
-
-
- TODO:
-
- - slot interface for cartridges
- - hand controllers
- - scramble RAM also
- - CAQ tape support
- - memory mapper
- - proper video timings
- - PAL mode
- - floppy support (I/O 0xe6-0xe7 = drive 1, 0xea-0xeb = drive 2)
- - modem
- - "old" version of BASIC ROM
- - Aquarius II
-
-***************************************************************************/
-
-#include "emu.h"
-#include "includes/aquarius.h"
-
-#include "softlist.h"
-#include "speaker.h"
-
-
-/***************************************************************************
- CONSTANTS
-***************************************************************************/
-
-#define XTAL1 8866000
-#define XTAL2 XTAL(7'159'090)
-
-
-/***************************************************************************
- GLOBAL VARIABLES
-***************************************************************************/
-
-
-
-/***************************************************************************
- READ/WRITE HANDLERS
-***************************************************************************/
-
-/*
- To read stored data from cassette the program should look at bit zero of
- the cassette input port and measure the time difference between leading
- edges or trailing edges. This is to prevent DC level shifting from altering
- pulse width of data. The program should then look for sync bytes for data
- synchronisation before data block transfer. If there is any task that must
- be performed during cassette loading, the maximum allowable time to do the
- job after one byte from cassette, must be less than 80% of the period of a
- mark cycle. Control must be returned at that time to the cassette routine
- in order to maintain data integrity.
-*/
-READ8_MEMBER(aquarius_state::cassette_r)
-{
- return ((m_cassette)->input() < +0.0) ? 0 : 1;
-}
-
-
-/*
- Sound and cassette port use a common pin. Therefore the signal to cassette
- will appear on audio output. Sound port is a simple one bit I/O and therefore
- it must be toggled at a specific rate under software control.
-*/
-WRITE8_MEMBER(aquarius_state::cassette_w)
-{
- m_speaker->level_w(BIT(data, 0));
- m_cassette->output(BIT(data, 0) ? +1.0 : -1.0);
-}
-
-
-/*
- The current state of the vertical sync will appear on bit 0 during a read of
- this port. The waveform and timing spec is shown as follows:
-
- |<- Active scan period ->|V.sync |<-
- | 12.8 ms |3.6 ms (PAL)
- | |2.8 ms (NTSC)
- +++++++++++++++++++++++++++++++ ++++++++++++
- + + +
- + + +
- +++++ +++++++++
-*/
-READ8_MEMBER(aquarius_state::vsync_r)
-{
- return m_screen->vblank() ? 0 : 1;
-}
-
-
-/*
- Bit D0 of this port controls the swapping of the lower 16K block in the memory
- map with the upper 16K. A 1 in this bit indicates swapping. This bit is reset
- after power up initialization.
-*/
-WRITE8_MEMBER(aquarius_state::mapper_w)
-{
-}
-
-
-/*
- Printer handshaking port (read) Port 0xFE when read, presents the clear
- to send status from PRNHASK pin at bit D0. A 1 indicates printer is ready,
- 0 means not ready.
-*/
-READ8_MEMBER(aquarius_state::printer_r)
-{
- return 1; /* ready */
-}
-
-
-/*
- This is a single bit I/O at D0, it will perform as a serial output
- port under software control. Since timing is done by software the
- baudrate is variable. In BASIC this is a 1200 baud printer port for
- the 40 column thermal printer.
-*/
-WRITE8_MEMBER(aquarius_state::printer_w)
-{
-}
-
-
-/*
- This port is 6 bits wide, when read, it returns the row data from the
- keyboard matrix. The keyboard is usually scanned in the following manner:
-
- The keyboard is a 6 row by 8 column matrix. The column is connected to
- the higher order address bus A15-A8. When Z80 executes its input
- instruction sets, either the current content of the accumulator (A) or
- the content of register (B) will go to the higher order address bus.
- Therefore the keyboard can be scanned by placing a specific scanning
- pattern in (A) or (B) and reading the result returned on rows.
-*/
-READ8_MEMBER(aquarius_state::keyboard_r)
-{
- uint8_t result = 0xff;
-
- if (!BIT(offset, 8)) result &= m_y0->read();
- if (!BIT(offset, 9)) result &= m_y1->read();
- if (!BIT(offset, 10)) result &= m_y2->read();
- if (!BIT(offset, 11)) result &= m_y3->read();
- if (!BIT(offset, 12)) result &= m_y4->read();
- if (!BIT(offset, 13)) result &= m_y5->read();
- if (!BIT(offset, 14)) result &= m_y6->read();
- if (!BIT(offset, 15)) result &= m_y7->read();
-
- return result;
-}
-
-
-/*
- Software lock: Writing this port with an 8 bit value will set the software
- scrambler pattern. The data that appears on the output side will be the
- result of the input bus EX-ORed with this pattern, bit by bit. The software
- lock is a scrambler built between the CPU and external interface. The
- scrambling pattern is contained in port 0xFF and is not readable. CPU data
- output to external bus will be XORed with this pattern in a bit by bit
- fashion to generate the real data on external bus. By the same mechanism,
- data from external bus is also XORed with this pattern and read by CPU.
-
- Therefore it the external device is RAM, the software lock simply has no
- effect as long as the scrambling pattern remains unchanged. For I/O
- operation the pattern is gated to 0 and thus scrambling action is nullified.
-
- In BASIC operation the scrambling pattern is generated by a random number
- routine. For game cartridge the lock pattern is generated from data in the
- game cartridge itself.
-*/
-WRITE8_MEMBER(aquarius_state::scrambler_w)
-{
- m_scrambler = data;
-}
-
-READ8_MEMBER(aquarius_state::cartridge_r)
-{
- uint8_t data = 0;
- if (m_cart->exists())
- data = m_cart->read_rom(offset);
-
- return data ^ m_scrambler;
-}
-
-
-/***************************************************************************
- DRIVER INIT
-***************************************************************************/
-
-void aquarius_state::init_aquarius()
-{
- /* install expansion memory if available */
- if (m_ram->size() > 0x1000)
- {
- address_space &space = m_maincpu->space(AS_PROGRAM);
-
- space.install_readwrite_bank(0x4000, 0x4000 + m_ram->size() - 0x1000 - 1, "bank1");
- membank("bank1")->set_base(m_ram->pointer());
- }
-}
-
-
-/***************************************************************************
- ADDRESS MAPS
-***************************************************************************/
-
-void aquarius_state::aquarius_mem(address_map &map)
-{
- map(0x0000, 0x1fff).rom();
- map(0x3000, 0x33ff).ram().w(FUNC(aquarius_state::aquarius_videoram_w)).share("videoram");
- map(0x3400, 0x37ff).ram().w(FUNC(aquarius_state::aquarius_colorram_w)).share("colorram");
- map(0x3800, 0x3fff).ram();
- map(0x4000, 0xbfff).noprw(); /* expansion ram */
- map(0xc000, 0xffff).r(FUNC(aquarius_state::cartridge_r));
-}
-
-void aquarius_state::aquarius_io(address_map &map)
-{
-// map(0x7e, 0x7f).mirror(0xff00).rw(FUNC(aquarius_state::modem_r), FUNC(aquarius_state::modem_w));
- map(0xf6, 0xf6).mirror(0xff00).rw("ay8910", FUNC(ay8910_device::data_r), FUNC(ay8910_device::data_w));
- map(0xf7, 0xf7).mirror(0xff00).w("ay8910", FUNC(ay8910_device::address_w));
- map(0xfc, 0xfc).mirror(0xff00).rw(FUNC(aquarius_state::cassette_r), FUNC(aquarius_state::cassette_w));
- map(0xfd, 0xfd).mirror(0xff00).rw(FUNC(aquarius_state::vsync_r), FUNC(aquarius_state::mapper_w));
- map(0xfe, 0xfe).mirror(0xff00).rw(FUNC(aquarius_state::printer_r), FUNC(aquarius_state::printer_w));
- map(0xff, 0xff).select(0xff00).rw(FUNC(aquarius_state::keyboard_r), FUNC(aquarius_state::scrambler_w));
-}
-
-
-/***************************************************************************
- INPUT PORTS
-***************************************************************************/
-
-/* the 'reset' key is directly tied to the reset line of the cpu */
-INPUT_CHANGED_MEMBER(aquarius_state::aquarius_reset)
-{
- m_maincpu->set_input_line(INPUT_LINE_RESET, newval ? CLEAR_LINE : ASSERT_LINE);
-}
-
-static INPUT_PORTS_START( aquarius )
- PORT_START("Y0")
- PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("= +\tNEXT") PORT_CODE(KEYCODE_EQUALS) PORT_CHAR('=') PORT_CHAR('+')
- PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("\xE2\x86\x90 \\") PORT_CODE(KEYCODE_BACKSPACE) PORT_CHAR(8) PORT_CHAR('\\')
- PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME(": *\tPEEK") PORT_CODE(KEYCODE_QUOTE) PORT_CHAR(':') PORT_CHAR('*')
- PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("RTN") PORT_CODE(KEYCODE_ENTER) PORT_CHAR(13)
- PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("; @\tPOKE") PORT_CODE(KEYCODE_COLON) PORT_CHAR(';') PORT_CHAR('@')
- PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME(". >\tVAL") PORT_CODE(KEYCODE_STOP) PORT_CHAR('.') PORT_CHAR('>')
- PORT_BIT( 0xc0, IP_ACTIVE_LOW, IPT_UNUSED )
-
- PORT_START("Y1")
- PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("- _\tFOR") PORT_CODE(KEYCODE_MINUS) PORT_CHAR('-') PORT_CHAR('_')
- PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("/ ^") PORT_CODE(KEYCODE_OPENBRACE) PORT_CHAR('/') PORT_CHAR('^')
- PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("0 ?") PORT_CODE(KEYCODE_0) PORT_CHAR('0') PORT_CHAR('?')
- PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_P) PORT_CHAR('p') PORT_CHAR('P') PORT_CHAR(16)
- PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("L\tPOINT") PORT_CODE(KEYCODE_L) PORT_CHAR('l') PORT_CHAR('L') PORT_CHAR(12)
- PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME(", <\tSTR$") PORT_CODE(KEYCODE_COMMA) PORT_CHAR(',') PORT_CHAR('<')
- PORT_BIT( 0xc0, IP_ACTIVE_LOW, IPT_UNUSED )
-
- PORT_START("Y2")
- PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("9 )\tCOPY") PORT_CODE(KEYCODE_9) PORT_CHAR('9') PORT_CHAR(')')
- PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_O) PORT_CHAR('o') PORT_CHAR('O') PORT_CHAR(15)
- PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("K\tPRESET") PORT_CODE(KEYCODE_K) PORT_CHAR('k') PORT_CHAR('K') PORT_CHAR(11)
- PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_M) PORT_CHAR('m') PORT_CHAR('M') PORT_CHAR(13)
- PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("N\tRIGHT$") PORT_CODE(KEYCODE_N) PORT_CHAR('n') PORT_CHAR('N') PORT_CHAR(14)
- PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("J\tPSET") PORT_CODE(KEYCODE_J) PORT_CHAR('j') PORT_CHAR('J') PORT_CHAR(10)
- PORT_BIT( 0xc0, IP_ACTIVE_LOW, IPT_UNUSED )
-
- PORT_START("Y3")
- PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("8 (\tRETURN") PORT_CODE(KEYCODE_8) PORT_CHAR('8') PORT_CHAR('(')
- PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_I) PORT_CHAR('i') PORT_CHAR('I') PORT_CHAR(9)
- PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("7 '\tGOSUB") PORT_CODE(KEYCODE_7) PORT_CHAR('7') PORT_CHAR('\'')
- PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_U) PORT_CHAR('u') PORT_CHAR('U') PORT_CHAR(21)
- PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_H) PORT_CHAR('h') PORT_CHAR('H') PORT_CHAR(8)
- PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("B\tMID$") PORT_CODE(KEYCODE_B) PORT_CHAR('b') PORT_CHAR('B') PORT_CHAR(2)
- PORT_BIT( 0xc0, IP_ACTIVE_LOW, IPT_UNUSED )
-
- PORT_START("Y4")
- PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("6 &\tON") PORT_CODE(KEYCODE_6) PORT_CHAR('6') PORT_CHAR('&')
- PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_Y) PORT_CHAR('y') PORT_CHAR('Y') PORT_CHAR(25)
- PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("G\tBELL") PORT_CODE(KEYCODE_G) PORT_CHAR('g') PORT_CHAR('G') PORT_CHAR(7)
- PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("V\tLEFT$") PORT_CODE(KEYCODE_V) PORT_CHAR('v') PORT_CHAR('V') PORT_CHAR(22)
- PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("C\tSTOP") PORT_CODE(KEYCODE_C) PORT_CHAR('c') PORT_CHAR('C') PORT_CHAR(3)
- PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("F\tDATA") PORT_CODE(KEYCODE_F) PORT_CHAR('f') PORT_CHAR('F') PORT_CHAR(6)
- PORT_BIT( 0xc0, IP_ACTIVE_LOW, IPT_UNUSED )
-
- PORT_START("Y5")
- PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("5 %\tGOTO") PORT_CODE(KEYCODE_5) PORT_CHAR('5') PORT_CHAR('%')
- PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("T\tINPUT") PORT_CODE(KEYCODE_T) PORT_CHAR('t') PORT_CHAR('T') PORT_CHAR(20)
- PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("4 $\tTHEN") PORT_CODE(KEYCODE_4) PORT_CHAR('4') PORT_CHAR('$')
- PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("R\tRETYP") PORT_CODE(KEYCODE_R) PORT_CHAR('r') PORT_CHAR('R') PORT_CHAR(18)
- PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("D\tREAD") PORT_CODE(KEYCODE_D) PORT_CHAR('d') PORT_CHAR('D') PORT_CHAR(4)
- PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("X\tDELINE") PORT_CODE(KEYCODE_X) PORT_CHAR('x') PORT_CHAR('X') PORT_CHAR(24)
- PORT_BIT( 0xc0, IP_ACTIVE_LOW, IPT_UNUSED )
-
- PORT_START("Y6")
- PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("3 #\tIF") PORT_CODE(KEYCODE_3) PORT_CHAR('3') PORT_CHAR('#')
- PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("E\tDIM") PORT_CODE(KEYCODE_E) PORT_CHAR('e') PORT_CHAR('E') PORT_CHAR(5)
- PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("S\tSTPLST") PORT_CODE(KEYCODE_S) PORT_CHAR('s') PORT_CHAR('S') PORT_CHAR(19)
- PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("Z\tCLOAD") PORT_CODE(KEYCODE_Z) PORT_CHAR('z') PORT_CHAR('Z') PORT_CHAR(26)
- PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("SPACE\tCHR$") PORT_CODE(KEYCODE_SPACE) PORT_CHAR(32)
- PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("A\tCSAVE") PORT_CODE(KEYCODE_A) PORT_CHAR('a') PORT_CHAR('A') PORT_CHAR(1)
- PORT_BIT( 0xc0, IP_ACTIVE_LOW, IPT_UNUSED )
-
- PORT_START("Y7")
- PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("2 \"\tLIST") PORT_CODE(KEYCODE_2) PORT_CHAR('2') PORT_CHAR('\"')
- PORT_BIT( 0x02, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("W\tREM") PORT_CODE(KEYCODE_W) PORT_CHAR('w') PORT_CHAR('W') PORT_CHAR(23)
- PORT_BIT( 0x04, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("1 !\tRUN") PORT_CODE(KEYCODE_1) PORT_CHAR('1') PORT_CHAR('!')
- PORT_BIT( 0x08, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_CODE(KEYCODE_Q) PORT_CHAR('q') PORT_CHAR('Q') PORT_CHAR(17)
- PORT_BIT( 0x10, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("SHIFT") PORT_CODE(KEYCODE_LSHIFT) PORT_CODE(KEYCODE_RSHIFT) PORT_CHAR(UCHAR_SHIFT_1)
- PORT_BIT( 0x20, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("CTL") PORT_CODE(KEYCODE_LCONTROL) PORT_CHAR(UCHAR_SHIFT_2)
- PORT_BIT( 0xc0, IP_ACTIVE_LOW, IPT_UNUSED )
-
- PORT_START("RESET")
- PORT_BIT( 0x01, IP_ACTIVE_LOW, IPT_KEYBOARD ) PORT_NAME("RST") PORT_CODE(KEYCODE_F10) PORT_CHANGED_MEMBER(DEVICE_SELF, aquarius_state, aquarius_reset, 0)
-
- PORT_START("LEFT")
- PORT_BIT( 0xff, IP_ACTIVE_LOW, IPT_UNKNOWN )
-
- PORT_START("RIGHT")
- PORT_BIT( 0xff, IP_ACTIVE_LOW, IPT_UNKNOWN )
-INPUT_PORTS_END
-
-
-/***************************************************************************
- CHARACTER LAYOUT
-***************************************************************************/
-
-static const gfx_layout aquarius_charlayout =
-{
- 8, 8,
- 256,
- 1,
- { 0 },
- { 0, 1, 2, 3, 4, 5, 6, 7 },
- { 0*8, 1*8, 2*8, 3*8, 4*8, 5*8, 6*8, 7*8, },
- 8 * 8
-};
-
-/* Graphics Decode Information */
-
-static GFXDECODE_START( gfx_aquarius )
- GFXDECODE_ENTRY( "gfx1", 0x0000, aquarius_charlayout, 0, 256 )
-GFXDECODE_END
-
-
-/***************************************************************************
- MACHINE DRIVERS
-***************************************************************************/
-
-void aquarius_state::aquarius(machine_config &config)
-{
- /* basic machine hardware */
- Z80(config, m_maincpu, XTAL(3'579'545)); // ???
- m_maincpu->set_addrmap(AS_PROGRAM, &aquarius_state::aquarius_mem);
- m_maincpu->set_addrmap(AS_IO, &aquarius_state::aquarius_io);
- m_maincpu->set_vblank_int("screen", FUNC(aquarius_state::irq0_line_hold));
-
- /* video hardware */
- SCREEN(config, m_screen, SCREEN_TYPE_RASTER);
- m_screen->set_refresh_hz(60);
- m_screen->set_vblank_time(ATTOSECONDS_IN_USEC(2800));
- m_screen->set_size(40 * 8, 25 * 8);
- m_screen->set_visarea(0, 40 * 8 - 1, 0 * 8, 25 * 8 - 1);
- m_screen->set_screen_update(FUNC(aquarius_state::screen_update_aquarius));
- m_screen->set_palette(m_palette);
-
- GFXDECODE(config, m_gfxdecode, m_palette, gfx_aquarius);
- TEA1002(config, m_tea1002, XTAL(8'867'238));
- PALETTE(config, m_palette, FUNC(aquarius_state::aquarius_palette), 512, 16);
-
- /* sound hardware */
- SPEAKER(config, "mono").front_center();
- SPEAKER_SOUND(config, m_speaker).add_route(ALL_OUTPUTS, "mono", 0.25);
-
- ay8910_device &ay8910(AY8910(config, "ay8910", XTAL(3'579'545)/2)); // ??? AY-3-8914
- ay8910.port_a_read_callback().set_ioport("RIGHT");
- ay8910.port_b_read_callback().set_ioport("LEFT");
- ay8910.add_route(ALL_OUTPUTS, "mono", 0.25);
-
- /* cassette */
- CASSETTE(config, m_cassette);
- m_cassette->set_default_state(CASSETTE_STOPPED | CASSETTE_MOTOR_ENABLED | CASSETTE_SPEAKER_ENABLED);
- m_cassette->add_route(ALL_OUTPUTS, "mono", 0.05);
-
- /* cartridge */
- GENERIC_CARTSLOT(config, m_cart, generic_linear_slot, "aquarius_cart");
-
- /* internal ram */
- RAM(config, RAM_TAG).set_default_size("4K").set_extra_options("8K,20K,36K");
-
- /* software lists */
- SOFTWARE_LIST(config, "cart_list").set_original("aquarius");
-}
-
-
-/***************************************************************************
- ROM DEFINITIONS
-***************************************************************************/
-
-ROM_START( aquarius )
- ROM_REGION(0x10000, "maincpu", 0)
-
- /* basic rom */
- ROM_DEFAULT_BIOS("rev2")
- ROM_SYSTEM_BIOS(0, "rev1", "Revision 1")
- ROMX_LOAD("aq1.u2", 0x0000, 0x2000, NO_DUMP, ROM_BIOS(0))
- ROM_SYSTEM_BIOS(1, "rev2", "Revision 2")
- ROMX_LOAD("aq2.u2", 0x0000, 0x2000, CRC(a2d15bcf) SHA1(ca6ef55e9ead41453efbf5062d6a60285e9661a6), ROM_BIOS(1))
-
- /* charrom */
- ROM_REGION(0x800, "gfx1", 0)
- ROM_LOAD("aq2.u5", 0x000, 0x800, CRC(e117f57c) SHA1(3588c0267c67dfbbda615bcf8dc3d3a5c5bd815a))
-ROM_END
-
-
-/***************************************************************************
- GAME DRIVERS
-***************************************************************************/
-
-// YEAR NAME PARENT COMPAT MACHINE INPUT CLASS INIT COMPANY FULLNAME FLAGS
-COMP( 1983, aquarius, 0, 0, aquarius, aquarius, aquarius_state, init_aquarius, "Mattel", "Aquarius (NTSC)", 0 )
-//COMP( 1984, aquariu2, aquarius, 0, aquarius, aquarius, aquarius_state, empty_init, "Mattel", "Aquarius II", MACHINE_NOT_WORKING )