diff options
Diffstat (limited to 'src/mame/audio/copsnrob.c')
-rw-r--r-- | src/mame/audio/copsnrob.c | 56 |
1 files changed, 28 insertions, 28 deletions
diff --git a/src/mame/audio/copsnrob.c b/src/mame/audio/copsnrob.c index d8cbcfbe46d..fa35a6e7169 100644 --- a/src/mame/audio/copsnrob.c +++ b/src/mame/audio/copsnrob.c @@ -184,7 +184,7 @@ static const discrete_555_cc_desc copsnrob_motor01_555cc = DISC_555_OUT_COUNT_R | DISCRETE_555_CC_TO_DISCHARGE_PIN, 5, /* v_pos */ DEFAULT_555_CC_SOURCE, - 1, /* v_out_high - ignored */ + 1, /* v_out_high - ignored */ 0.6 /* v_cc_junction */ }; @@ -202,7 +202,7 @@ static const discrete_555_cc_desc copsnrob_motor01_555cc = #define COPSNROB_MOTOR01(_output, _input, _num) \ /* simulate the RC connected to the transistor with a DAC */ \ DISCRETE_DAC_R1(COPSNROB_MOTOR01_NODE(_num, 0), \ - _input, 4.2, &copsnrob_motor01_cc_dac) /* DATA; VDATA - TTL with light load */ \ + _input, 4.2, &copsnrob_motor01_cc_dac) /* DATA; VDATA - TTL with light load */ \ DISCRETE_555_CC(COPSNROB_MOTOR01_NODE(_num, 1), /* IC F2, pin 10 from IC F3, pin 9 */ \ 1, /* RESET - IC F3, pin 10 */ \ COPSNROB_MOTOR01_NODE(_num, 0), /* VIN */ \ @@ -222,7 +222,7 @@ static const discrete_555_cc_desc copsnrob_motor01_555cc = COPSNROB_MOTOR01_NODE(_num, 3), 2, /* INP1, INP2 */ \ "02&2/12*+") /* get bits ready for DAC */\ DISCRETE_DAC_R1(_output, \ - COPSNROB_MOTOR01_NODE(_num, 4), 4.2, &copsnrob_motor01_out_dac) /* DATA; VDATA - TTL with light load */ + COPSNROB_MOTOR01_NODE(_num, 4), 4.2, &copsnrob_motor01_out_dac) /* DATA; VDATA - TTL with light load */ /************************************************ * MOTOR0/1 Definition Start @@ -235,7 +235,7 @@ static const discrete_555_cc_desc copsnrob_motor01_555cc = #define COPSNROB_MOTOR23(_output, _input, _num) \ /* simulate the RC connected to the 555 CV pin with a DAC */ \ DISCRETE_DAC_R1(COPSNROB_MOTOR23_NODE(_num, 0), \ - _input, 4.2, &copsnrob_motor23_cv_dac) /* DATA; VDATA - TTL with light load */ \ + _input, 4.2, &copsnrob_motor23_cv_dac) /* DATA; VDATA - TTL with light load */ \ DISCRETE_555_ASTABLE_CV(COPSNROB_MOTOR23_NODE(_num, 1), /* IC J2, pin 5 */ \ 1, /* RESET */ \ COPSNROB_R64, COPSNROB_R42, COPSNROB_C24, \ @@ -294,8 +294,8 @@ DISCRETE_STEP(copsnrob_custom_noise) t_used += node->info->sample_time; /* This clock will never run faster then the sample rate, - * so we do not bother to check. - */ + * so we do not bother to check. + */ if (t_used > t1) { /* calculate the overshoot time */ @@ -403,10 +403,10 @@ DISCRETE_STEP(copsnrob_zings_555_monostable) /* From testing a real IC */ /* Trigger going low overides everything. It forces the FF/Output high. - * If Threshold is high, the output will still go high as long as trigger is low. - * The output will then go low when trigger rises above it's 1/3VCC value. - * If threshold is below it's 2/3VCC value, the output will remain high. - */ + * If Threshold is high, the output will still go high as long as trigger is low. + * The output will then go low when trigger rises above it's 1/3VCC value. + * If threshold is below it's 2/3VCC value, the output will remain high. + */ if (ff_set) { flip_flop = 1; @@ -550,9 +550,9 @@ DISCRETE_STEP(copsnrob_zings_555_astable) v_trigger = v_cap1 / 3; /* This oscillator will never create a frequency greater then 1/2 the sample rate, - * so we won't worry about missing samples */ + * so we won't worry about missing samples */ /* No need to optimize the charge circuit. It always charges/discharges to a voltage - * greater then it will ever reach. */ + * greater then it will ever reach. */ if (flip_flop) { /* charge */ @@ -619,15 +619,15 @@ static const discrete_custom_info copsnrob_zings_555_astable = DISCRETE_SOUND_START(copsnrob) /************************************************ - * Input register mapping - ************************************************/ + * Input register mapping + ************************************************/ DISCRETE_INPUT_LOGIC(COPSNROB_MOTOR0_INV) DISCRETE_INPUT_LOGIC(COPSNROB_MOTOR1_INV) DISCRETE_INPUT_LOGIC(COPSNROB_MOTOR2_INV) DISCRETE_INPUT_LOGIC(COPSNROB_MOTOR3_INV) /* !! DISABLED UNTIL ADDRESS IS FOUND !! */ -// DISCRETE_INPUTX_LOGIC(COPSNROB_ZINGS_INV, 4, 0, 0) -// DISCRETE_INPUT_LOGIC(COPSNROB_FIRES_INV) +// DISCRETE_INPUTX_LOGIC(COPSNROB_ZINGS_INV, 4, 0, 0) +// DISCRETE_INPUT_LOGIC(COPSNROB_FIRES_INV) DISCRETE_INPUT_NOT(COPSNROB_CRASH_INV) /* inverted for counter use */ DISCRETE_INPUT_LOGIC(COPSNROB_SCREECH_INV) DISCRETE_INPUT_NOT(COPSNROB_AUDIO_ENABLE) /* IC A1, pins 2 & 12 */ @@ -639,20 +639,20 @@ DISCRETE_SOUND_START(copsnrob) DISCRETE_CONSTANT(COPSNROB_FIRES_INV, 4) /* data bit will be normally high */ /************************************************ - * MOTOR0/1 - ************************************************/ + * MOTOR0/1 + ************************************************/ COPSNROB_MOTOR01(COPSNROB_MOTOR0_SND, COPSNROB_MOTOR0_INV, 0) COPSNROB_MOTOR01(COPSNROB_MOTOR1_SND, COPSNROB_MOTOR1_INV, 1) /************************************************ - * MOTOR2/3 - ************************************************/ + * MOTOR2/3 + ************************************************/ COPSNROB_MOTOR23(COPSNROB_MOTOR2_SND, COPSNROB_MOTOR2_INV, 0) COPSNROB_MOTOR23(COPSNROB_MOTOR3_SND, COPSNROB_MOTOR3_INV, 1) /************************************************ - * CRASH - ************************************************/ + * CRASH + ************************************************/ DISCRETE_CUSTOM1(COPSNROB_NOISE_1, /* IC J2, pin 10 */ COPSNROB_2V, /* CLK */ &copsnrob_custom_noise) @@ -672,13 +672,13 @@ DISCRETE_SOUND_START(copsnrob) &copsnrob_crash_dac) /************************************************ - * SCREECH - ************************************************/ + * SCREECH + ************************************************/ DISCRETE_CONSTANT(COPSNROB_SCREECH_SND, 0) /************************************************ - * FZ (Fires, Zings) - ************************************************/ + * FZ (Fires, Zings) + ************************************************/ DISCRETE_CUSTOM3(NODE_60, /* IC D3, pin 5 */ /* We can ignore R47 & R48 */ COPSNROB_ZINGS_INV, /* IC D3, pin 6 */ @@ -699,8 +699,8 @@ DISCRETE_SOUND_START(copsnrob) COPSNROB_R73 / COPSNROB_R26) /************************************************ - * MIXER - ************************************************/ + * MIXER + ************************************************/ DISCRETE_MIXER5(NODE_90, /* IC B3, pin 3 */ COPSNROB_AUDIO_ENABLE, /* ENAB */ COPSNROB_MOTOR1_SND, COPSNROB_MOTOR0_SND, COPSNROB_FZ_SND, COPSNROB_SCREECH_SND, COPSNROB_CRASH_SND, |