diff options
Diffstat (limited to 'src/emu/cpu/m68000/m68kconf.h')
-rw-r--r-- | src/emu/cpu/m68000/m68kconf.h | 201 |
1 files changed, 201 insertions, 0 deletions
diff --git a/src/emu/cpu/m68000/m68kconf.h b/src/emu/cpu/m68000/m68kconf.h new file mode 100644 index 00000000000..0ad15013557 --- /dev/null +++ b/src/emu/cpu/m68000/m68kconf.h @@ -0,0 +1,201 @@ +/* ======================================================================== */ +/* ========================= LICENSING & COPYRIGHT ======================== */ +/* ======================================================================== */ +/* + * MUSASHI + * Version 3.31 + * + * A portable Motorola M680x0 processor emulation engine. + * Copyright 1998-2007 Karl Stenerud. All rights reserved. + * + * This code may be freely used for non-commercial purposes as long as this + * copyright notice remains unaltered in the source code and any binary files + * containing this code in compiled form. + * + * All other lisencing terms must be negotiated with the author + * (Karl Stenerud). + * + * The latest version of this code can be obtained at: + * http://kstenerud.cjb.net + */ + + + +#ifndef M68KCONF__HEADER +#define M68KCONF__HEADER + + +/* Configuration switches. + * Use OPT_SPECIFY_HANDLER for configuration options that allow callbacks. + * OPT_SPECIFY_HANDLER causes the core to link directly to the function + * or macro you specify, rather than using callback functions whose pointer + * must be passed in using m68k_set_xxx_callback(). + */ +#define OPT_OFF 0 +#define OPT_ON 1 +#define OPT_SPECIFY_HANDLER 2 + + +/* ======================================================================== */ +/* ============================== MAME STUFF ============================== */ +/* ======================================================================== */ + +/* If you're compiling this for MAME, only change M68K_COMPILE_FOR_MAME + * to OPT_ON and use m68kmame.h to configure the 68k core. + */ +#ifndef M68K_COMPILE_FOR_MAME +#define M68K_COMPILE_FOR_MAME OPT_ON +#endif /* M68K_COMPILE_FOR_MAME */ + + +#if M68K_COMPILE_FOR_MAME == OPT_OFF + + +/* ======================================================================== */ +/* ============================= CONFIGURATION ============================ */ +/* ======================================================================== */ + +/* Turn ON if you want to use the following M68K variants */ +#define M68K_EMULATE_008 OPT_ON +#define M68K_EMULATE_010 OPT_ON +#define M68K_EMULATE_EC020 OPT_ON +#define M68K_EMULATE_020 OPT_ON +#define M68K_EMULATE_040 OPT_ON + + +/* If ON, the CPU will call m68k_read_immediate_xx() for immediate addressing + * and m68k_read_pcrelative_xx() for PC-relative addressing. + * If off, all read requests from the CPU will be redirected to m68k_read_xx() + */ +#define M68K_SEPARATE_READS OPT_OFF + +/* If ON, the CPU will call m68k_write_32_pd() when it executes move.l with a + * predecrement destination EA mode instead of m68k_write_32(). + * To simulate real 68k behavior, m68k_write_32_pd() must first write the high + * word to [address+2], and then write the low word to [address]. + */ +#define M68K_SIMULATE_PD_WRITES OPT_OFF + +/* If ON, CPU will call the interrupt acknowledge callback when it services an + * interrupt. + * If off, all interrupts will be autovectored and all interrupt requests will + * auto-clear when the interrupt is serviced. + */ +#define M68K_EMULATE_INT_ACK OPT_OFF +#define M68K_INT_ACK_CALLBACK(A) your_int_ack_handler_function(A) + + +/* If ON, CPU will call the breakpoint acknowledge callback when it encounters + * a breakpoint instruction and it is running a 68010+. + */ +#define M68K_EMULATE_BKPT_ACK OPT_OFF +#define M68K_BKPT_ACK_CALLBACK() your_bkpt_ack_handler_function() + + +/* If ON, the CPU will monitor the trace flags and take trace exceptions + */ +#define M68K_EMULATE_TRACE OPT_OFF + + +/* If ON, CPU will call the output reset callback when it encounters a reset + * instruction. + */ +#define M68K_EMULATE_RESET OPT_OFF +#define M68K_RESET_CALLBACK() your_reset_handler_function() + + +/* If ON, CPU will call the callback when it encounters a cmpi.l #v, dn + * instruction. + */ +#define M68K_CMPILD_HAS_CALLBACK OPT_OFF +#define M68K_CMPILD_CALLBACK(v,r) your_cmpild_handler_function(v,r) + + +/* If ON, CPU will call the callback when it encounters a rte + * instruction. + */ +#define M68K_RTE_HAS_CALLBACK OPT_OFF +#define M68K_RTE_CALLBACK() your_rte_handler_function() + +/* If ON, CPU will call the callback when it encounters a tas + * instruction. + */ +#define M68K_TAS_HAS_CALLBACK OPT_OFF +#define M68K_TAS_CALLBACK() your_tas_handler_function() + + +/* If ON, CPU will call the set fc callback on every memory access to + * differentiate between user/supervisor, program/data access like a real + * 68000 would. This should be enabled and the callback should be set if you + * want to properly emulate the m68010 or higher. (moves uses function codes + * to read/write data from different address spaces) + */ +#define M68K_EMULATE_FC OPT_OFF +#define M68K_SET_FC_CALLBACK(A) your_set_fc_handler_function(A) + + +/* If ON, CPU will call the pc changed callback when it changes the PC by a + * large value. This allows host programs to be nicer when it comes to + * fetching immediate data and instructions on a banked memory system. + */ +#define M68K_MONITOR_PC OPT_OFF +#define M68K_SET_PC_CALLBACK(A) your_pc_changed_handler_function(A) + + +/* If ON, CPU will call the instruction hook callback before every + * instruction. + */ +#define M68K_INSTRUCTION_HOOK OPT_OFF +#define M68K_INSTRUCTION_CALLBACK() your_instruction_hook_function() + + +/* If ON, the CPU will emulate the 4-byte prefetch queue of a real 68000 */ +#define M68K_EMULATE_PREFETCH OPT_OFF + + +/* If ON, the CPU will generate address error exceptions if it tries to + * access a word or longword at an odd address. + * NOTE: This is only emulated properly for 68000 mode. + */ +#define M68K_EMULATE_ADDRESS_ERROR OPT_OFF + + +/* Turn ON to enable logging of illegal instruction calls. + * M68K_LOG_FILEHANDLE must be #defined to a stdio file stream. + * Turn on M68K_LOG_1010_1111 to log all 1010 and 1111 calls. + */ +#define M68K_LOG_ENABLE OPT_OFF +#define M68K_LOG_1010_1111 OPT_OFF +#define M68K_LOG_FILEHANDLE some_file_handle + + +/* ----------------------------- COMPATIBILITY ---------------------------- */ + +/* The following options set optimizations that violate the current ANSI + * standard, but will be compliant under the forthcoming C9X standard. + */ + + +/* If ON, the enulation core will use 64-bit integers to speed up some + * operations. +*/ +#define M68K_USE_64_BIT OPT_OFF + + +/* Set to your compiler's static inline keyword to enable it, or + * set it to blank to disable it. + * If you define INLINE in the makefile, it will override this value. + * NOTE: not enabling inline functions will SEVERELY slow down emulation. + */ +#ifndef INLINE +#define INLINE static __inline__ +#endif /* INLINE */ + +#endif /* M68K_COMPILE_FOR_MAME */ + + +/* ======================================================================== */ +/* ============================== END OF FILE ============================= */ +/* ======================================================================== */ + +#endif /* M68KCONF__HEADER */ |