summaryrefslogtreecommitdiffstatshomepage
path: root/src/devices/sound/ay8910.cpp
diff options
context:
space:
mode:
Diffstat (limited to 'src/devices/sound/ay8910.cpp')
-rw-r--r--src/devices/sound/ay8910.cpp140
1 files changed, 42 insertions, 98 deletions
diff --git a/src/devices/sound/ay8910.cpp b/src/devices/sound/ay8910.cpp
index 9ee02834f67..71dd5854725 100644
--- a/src/devices/sound/ay8910.cpp
+++ b/src/devices/sound/ay8910.cpp
@@ -120,7 +120,7 @@
/***************************************************************************
- ay8910.cpp
+ ay8910.c
Emulation of the AY-3-8910 / YM2149 sound chip.
@@ -511,56 +511,6 @@ Yamaha YMZ294: limited info: 0 I/O port
between 4MHz (H) and 6MHz (L), while pin 10 is /TEST.
OKI M5255, Winbond WF19054, JFC 95101, File KC89C72, Toshiba T7766A : differences to be listed
-AY8930 Expanded mode registers :
- Bank Register Bits
- A 0 xxxx xxxx Channel A Tone period fine tune
- A 1 xxxx xxxx Channel A Tone period coarse tune
- A 2 xxxx xxxx Channel B Tone period fine tune
- A 3 xxxx xxxx Channel B Tone period coarse tune
- A 4 xxxx xxxx Channel C Tone period fine tune
- A 5 xxxx xxxx Channel C Tone period coarse tune
- A 6 xxxx xxxx Noise period
- A 7 x--- ---- I/O Port B input(0) / output(1)
- -x-- ---- I/O Port A input(0) / output(1)
- --x- ---- Channel C Noise enable(0) / disable(1)
- ---x ---- Channel B Noise enable(0) / disable(1)
- ---- x--- Channel A Noise enable(0) / disable(1)
- ---- -x-- Channel C Tone enable(0) / disable(1)
- ---- --x- Channel B Tone enable(0) / disable(1)
- ---- ---x Channel A Tone enable(0) / disable(1)
- A 8 --x- ---- Channel A Envelope mode
- ---x xxxx Channel A Tone volume
- A 9 --x- ---- Channel B Envelope mode
- ---x xxxx Channel B Tone volume
- A A --x- ---- Channel C Envelope mode
- ---x xxxx Channel C Tone volume
- A B xxxx xxxx Channel A Envelope period fine tune
- A C xxxx xxxx Channel A Envelope period coarse tune
- A D 101- ---- 101 = Expanded mode enable, other AY-3-8910A Compatiblity mode
- ---0 ---- 0 for Register Bank A
- ---- xxxx Channel A Envelope Shape/Cycle
- A E xxxx xxxx 8 bit Parallel I/O on Port A
- A F xxxx xxxx 8 bit Parallel I/O on Port B
-
- B 0 xxxx xxxx Channel B Envelope period fine tune
- B 1 xxxx xxxx Channel B Envelope period coarse tune
- B 2 xxxx xxxx Channel C Envelope period fine tune
- B 3 xxxx xxxx Channel C Envelope period coarse tune
- B 4 ---- xxxx Channel B Envelope Shape/Cycle
- B 5 ---- xxxx Channel C Envelope Shape/Cycle
- B 6 ---- xxxx Channel A Duty Cycle
- B 7 ---- xxxx Channel B Duty Cycle
- B 8 ---- xxxx Channel C Duty Cycle
- B 9 xxxx xxxx Noise "And" Mask
- B A xxxx xxxx Noise "Or" Mask
- B B Reserved (Read as 0)
- B C Reserved (Read as 0)
- B D 101- ---- 101 = Expanded mode enable, other AY-3-8910A Compatiblity mode
- ---1 ---- 1 for Register Bank B
- ---- xxxx Channel A Envelope Shape
- B E Reserved (Read as 0)
- B F Test (Function unknown)
-
Decaps:
AY-3-8914 - http://siliconpr0n.org/map/gi/ay-3-8914/mz_mit20x/
AY-3-8910 - http://privatfrickler.de/blick-auf-den-chip-soundchip-general-instruments-ay-3-8910/
@@ -785,7 +735,7 @@ static const ay8910_device::mosfet_param ay8910_mosfet_param =
*
*************************************/
-static inline void build_3D_table(double rl, const ay8910_device::ay_ym_param *par, const ay8910_device::ay_ym_param *par_env, int normalize, double factor, int zero_is_off, s32 *tab)
+static inline void build_3D_table(double rl, const ay8910_device::ay_ym_param *par, const ay8910_device::ay_ym_param *par_env, int normalize, double factor, int zero_is_off, int32_t *tab)
{
double min = 10.0, max = 0.0;
@@ -844,7 +794,7 @@ static inline void build_3D_table(double rl, const ay8910_device::ay_ym_param *p
/* for (e=0;e<16;e++) printf("%d %d\n",e<<10, tab[e<<10]); */
}
-static inline void build_single_table(double rl, const ay8910_device::ay_ym_param *par, int normalize, s32 *tab, int zero_is_off)
+static inline void build_single_table(double rl, const ay8910_device::ay_ym_param *par, int normalize, int32_t *tab, int zero_is_off)
{
int j;
double rt;
@@ -883,7 +833,7 @@ static inline void build_single_table(double rl, const ay8910_device::ay_ym_para
}
-static inline void build_mosfet_resistor_table(const ay8910_device::mosfet_param &par, const double rd, s32 *tab)
+static inline void build_mosfet_resistor_table(const ay8910_device::mosfet_param &par, const double rd, int32_t *tab)
{
int j;
@@ -907,7 +857,7 @@ static inline void build_mosfet_resistor_table(const ay8910_device::mosfet_param
}
-u16 ay8910_device::mix_3D()
+uint16_t ay8910_device::mix_3D()
{
int indx = 0, chan;
@@ -939,7 +889,6 @@ u16 ay8910_device::mix_3D()
void ay8910_device::ay8910_write_reg(int r, int v)
{
//if (r >= 11 && r <= 13 ) printf("%d %x %02x\n", PSG->index, r, v);
- device_type chip_type = type();
m_regs[r] = v;
switch( r )
@@ -981,14 +930,6 @@ void ay8910_device::ay8910_write_reg(int r, int v)
m_last_enable = m_regs[AY_ENABLE];
break;
case AY_ESHAPE:
- if (chip_type == AY8930)
- {
- m_mode = (v >> 4) & 0xf;
- if ((m_mode & 0xe) == 0xa) // AY8930 expanded mode
- logerror("warning: activated unemulated extended mode at %s, bank %02x\n", name(), m_mode & 1);
- else if (m_mode & 0xf)
- logerror("warning: activated unknown mode %02x at %s\n", m_mode & 0xf, name());
- }
if ( (v & 0x0f) > 0)
osd_printf_verbose("EShape\n");
m_attack = (m_regs[AY_ESHAPE] & 0x04) ? m_env_step_mask : 0x00;
@@ -1234,7 +1175,6 @@ void ay8910_device::ay8910_statesave()
save_item(NAME(m_attack));
save_item(NAME(m_holding));
save_item(NAME(m_rng));
- save_item(NAME(m_mode));
}
//-------------------------------------------------
@@ -1262,7 +1202,7 @@ void ay8910_device::device_start()
m_streams = 1;
}
- m_vol3d_table = make_unique_clear<s32[]>(8*32*32*32);
+ m_vol3d_table = make_unique_clear<int32_t[]>(8*32*32*32);
build_mixer_table();
@@ -1293,7 +1233,7 @@ void ay8910_device::ay8910_reset_ym()
m_count_env = 0;
m_prescale_noise = 0;
m_last_enable = -1; /* force a write */
- for (i = 0; i < AY_PORTA; i++)
+ for (i = 0;i < AY_PORTA;i++)
ay8910_write_reg(i,0);
m_ready = 1;
#if ENABLE_REGISTER_TEST
@@ -1338,7 +1278,7 @@ void ay8910_device::device_clock_changed()
ay_set_clock(clock());
}
-void ay8910_device::ay8910_write_ym(int addr, u8 data)
+void ay8910_device::ay8910_write_ym(int addr, uint8_t data)
{
if (addr & 1)
{
@@ -1369,7 +1309,7 @@ void ay8910_device::ay8910_write_ym(int addr, u8 data)
}
}
-u8 ay8910_device::ay8910_read_ym()
+uint8_t ay8910_device::ay8910_read_ym()
{
device_type chip_type = type();
int r = m_register_latch;
@@ -1418,13 +1358,13 @@ u8 ay8910_device::ay8910_read_ym()
- YM2149: no anomaly
*/
if (chip_type == AY8910) {
- const u8 mask[0x10]={
+ const uint8_t mask[0x10]={
0xff,0x0f,0xff,0x0f,0xff,0x0f,0x1f,0xff,0x1f,0x1f,0x1f,0xff,0xff,0x0f,0xff,0xff
};
return m_regs[r] & mask[r];
}
else if (chip_type == AY8914) {
- const u8 mask[0x10]={
+ const uint8_t mask[0x10]={
0xff,0x0f,0xff,0x0f,0xff,0x0f,0x1f,0xff,0x3f,0x3f,0x3f,0xff,0xff,0x0f,0xff,0xff
};
return m_regs[r] & mask[r];
@@ -1454,69 +1394,74 @@ void ay8910_device::device_reset()
*
*************************************/
-void ay8910_device::address_w(u8 data)
+READ8_MEMBER( ay8910_device::data_r )
+{
+ return ay8910_read_ym();
+}
+
+WRITE8_MEMBER( ay8910_device::address_w )
{
#if ENABLE_REGISTER_TEST
return;
#else
- ay8910_write_ym(0, data);
+ data_address_w(space, 1, data);
#endif
}
-void ay8910_device::data_w(u8 data)
+WRITE8_MEMBER( ay8910_device::data_w )
{
#if ENABLE_REGISTER_TEST
return;
#else
- ay8910_write_ym(1, data);
+ data_address_w(space, 0, data);
#endif
}
// here, BC1 is hooked up to A0 on the host and BC2 is hooked up to A1
-void ay8910_device::write_bc1_bc2(offs_t offset, u8 data)
+WRITE8_MEMBER( ay8910_device::write_bc1_bc2 )
{
switch (offset & 3)
{
case 0: // latch address
- address_w(data);
+ address_w(space, 0, data);
break;
case 1: // inactive
break;
case 2: // write to psg
- data_w(data);
+ data_w(space, 0, data);
break;
case 3: // latch address
- address_w(data);
+ address_w(space, 0, data);
break;
}
}
-static const u8 mapping8914to8910[16] = { 0, 2, 4, 11, 1, 3, 5, 12, 7, 6, 13, 8, 9, 10, 14, 15 };
+static const int mapping8914to8910[16] = { 0, 2, 4, 11, 1, 3, 5, 12, 7, 6, 13, 8, 9, 10, 14, 15 };
-u8 ay8914_device::read(offs_t offset)
+READ8_MEMBER( ay8914_device::read )
{
- u8 rv;
- address_w(mapping8914to8910[offset & 0xf]);
- rv = data_r();
+ uint16_t rv;
+ address_w(space, 0, mapping8914to8910[offset & 0xf]);
+ rv = (uint16_t) data_r(space, 0);
return rv;
}
-void ay8914_device::write(offs_t offset, u8 data)
+WRITE8_MEMBER( ay8914_device::write )
{
- address_w(mapping8914to8910[offset & 0xf]);
- data_w(data & 0xff);
+ address_w(space, 0, mapping8914to8910[offset & 0xf]);
+ data_w(space, 0, data & 0xff);
}
DEFINE_DEVICE_TYPE(AY8910, ay8910_device, "ay8910", "AY-3-8910A PSG")
-ay8910_device::ay8910_device(const machine_config &mconfig, const char *tag, device_t *owner, u32 clock)
+ay8910_device::ay8910_device(const machine_config &mconfig, const char *tag, device_t *owner, uint32_t clock)
: ay8910_device(mconfig, AY8910, tag, owner, clock, PSG_TYPE_AY, 3, 2)
{
}
-ay8910_device::ay8910_device(const machine_config &mconfig, device_type type, const char *tag, device_t *owner, u32 clock,
+ay8910_device::ay8910_device(const machine_config &mconfig, device_type type, const char *tag, device_t *owner, uint32_t clock,
psg_type_t psg_type, int streams, int ioports)
: device_t(mconfig, type, tag, owner, clock),
device_sound_interface(mconfig, *this),
@@ -1538,7 +1483,6 @@ ay8910_device::ay8910_device(const machine_config &mconfig, device_type type, co
m_attack(0),
m_holding(0),
m_rng(0),
- m_mode(0),
m_env_step_mask(psg_type == PSG_TYPE_AY ? 0x0f : 0x1f),
m_step( psg_type == PSG_TYPE_AY ? 2 : 1),
m_zero_is_off( psg_type == PSG_TYPE_AY ? 1 : 0),
@@ -1584,7 +1528,7 @@ void ay8910_device::set_type(psg_type_t psg_type)
DEFINE_DEVICE_TYPE(AY8912, ay8912_device, "ay8912", "AY-3-8912A PSG")
-ay8912_device::ay8912_device(const machine_config &mconfig, const char *tag, device_t *owner, u32 clock)
+ay8912_device::ay8912_device(const machine_config &mconfig, const char *tag, device_t *owner, uint32_t clock)
: ay8910_device(mconfig, AY8912, tag, owner, clock, PSG_TYPE_AY, 3, 1)
{
}
@@ -1592,7 +1536,7 @@ ay8912_device::ay8912_device(const machine_config &mconfig, const char *tag, dev
DEFINE_DEVICE_TYPE(AY8913, ay8913_device, "ay8913", "AY-3-8913 PSG")
-ay8913_device::ay8913_device(const machine_config &mconfig, const char *tag, device_t *owner, u32 clock)
+ay8913_device::ay8913_device(const machine_config &mconfig, const char *tag, device_t *owner, uint32_t clock)
: ay8910_device(mconfig, AY8913, tag, owner, clock, PSG_TYPE_AY, 3, 0)
{
}
@@ -1600,7 +1544,7 @@ ay8913_device::ay8913_device(const machine_config &mconfig, const char *tag, dev
DEFINE_DEVICE_TYPE(AY8914, ay8914_device, "ay8914", "AY-3-8914A PSG")
-ay8914_device::ay8914_device(const machine_config &mconfig, const char *tag, device_t *owner, u32 clock)
+ay8914_device::ay8914_device(const machine_config &mconfig, const char *tag, device_t *owner, uint32_t clock)
: ay8910_device(mconfig, AY8914, tag, owner, clock, PSG_TYPE_AY, 3, 2)
{
}
@@ -1608,7 +1552,7 @@ ay8914_device::ay8914_device(const machine_config &mconfig, const char *tag, dev
DEFINE_DEVICE_TYPE(AY8930, ay8930_device, "ay8930", "AY8930 EPSG")
-ay8930_device::ay8930_device(const machine_config &mconfig, const char *tag, device_t *owner, u32 clock)
+ay8930_device::ay8930_device(const machine_config &mconfig, const char *tag, device_t *owner, uint32_t clock)
: ay8910_device(mconfig, AY8930, tag, owner, clock, PSG_TYPE_AY, 3, 2)
{
}
@@ -1616,7 +1560,7 @@ ay8930_device::ay8930_device(const machine_config &mconfig, const char *tag, dev
DEFINE_DEVICE_TYPE(YM2149, ym2149_device, "ym2149", "YM2149 SSG")
-ym2149_device::ym2149_device(const machine_config &mconfig, const char *tag, device_t *owner, u32 clock)
+ym2149_device::ym2149_device(const machine_config &mconfig, const char *tag, device_t *owner, uint32_t clock)
: ay8910_device(mconfig, YM2149, tag, owner, clock, PSG_TYPE_YM, 3, 2)
{
}
@@ -1624,7 +1568,7 @@ ym2149_device::ym2149_device(const machine_config &mconfig, const char *tag, dev
DEFINE_DEVICE_TYPE(YM3439, ym3439_device, "ym3439", "YM3439 SSGC")
-ym3439_device::ym3439_device(const machine_config &mconfig, const char *tag, device_t *owner, u32 clock)
+ym3439_device::ym3439_device(const machine_config &mconfig, const char *tag, device_t *owner, uint32_t clock)
: ay8910_device(mconfig, YM3439, tag, owner, clock, PSG_TYPE_YM, 3, 2)
{
}
@@ -1632,7 +1576,7 @@ ym3439_device::ym3439_device(const machine_config &mconfig, const char *tag, dev
DEFINE_DEVICE_TYPE(YMZ284, ymz284_device, "ymz284", "YMZ284 SSGL")
-ymz284_device::ymz284_device(const machine_config &mconfig, const char *tag, device_t *owner, u32 clock)
+ymz284_device::ymz284_device(const machine_config &mconfig, const char *tag, device_t *owner, uint32_t clock)
: ay8910_device(mconfig, YMZ284, tag, owner, clock, PSG_TYPE_YM, 1, 0)
{
}
@@ -1640,7 +1584,7 @@ ymz284_device::ymz284_device(const machine_config &mconfig, const char *tag, dev
DEFINE_DEVICE_TYPE(YMZ294, ymz294_device, "ymz294", "YMZ294 SSGLP")
-ymz294_device::ymz294_device(const machine_config &mconfig, const char *tag, device_t *owner, u32 clock)
+ymz294_device::ymz294_device(const machine_config &mconfig, const char *tag, device_t *owner, uint32_t clock)
: ay8910_device(mconfig, YMZ294, tag, owner, clock, PSG_TYPE_YM, 1, 0)
{
}