summaryrefslogtreecommitdiffstatshomepage
diff options
context:
space:
mode:
-rw-r--r--src/mame/heathkit/h89.cpp245
1 files changed, 137 insertions, 108 deletions
diff --git a/src/mame/heathkit/h89.cpp b/src/mame/heathkit/h89.cpp
index 4ab54aea254..93727e84aef 100644
--- a/src/mame/heathkit/h89.cpp
+++ b/src/mame/heathkit/h89.cpp
@@ -238,7 +238,7 @@ void h89_state::h89_io(address_map &map)
map(0xf0, 0xf1).rw(FUNC(h89_state::raise_NMI_r),FUNC(h89_state::raise_NMI_w));
// General Purpose Port (GPP)
- map(0xf2, 0xf2).w(FUNC(h89_state::port_f2_w)).portr("MTR90_SW501");
+ map(0xf2, 0xf2).w(FUNC(h89_state::port_f2_w)).portr("SW501");
// port defined on the H8. On the H89, access to these addresses causes a NMI
map(0xfa, 0xfb).rw(FUNC(h89_state::raise_NMI_r), FUNC(h89_state::raise_NMI_w));
@@ -246,133 +246,162 @@ void h89_state::h89_io(address_map &map)
// Input ports
static INPUT_PORTS_START( h89 )
-/*
- // Settings with the MTR-88 ROM (#444-40)
- PORT_START("MTR88_SW501")
- PORT_DIPNAME( 0x1f, 0x00, "Unused" ) PORT_DIPLOCATION("S1:1,2,3,4,5")
- PORT_DIPNAME( 0x20, 0x20, "Perform memory test at start" ) PORT_DIPLOCATION("S1:6")
- PORT_DIPSETTING( 0x20, DEF_STR( Off ) )
- PORT_DIPSETTING( 0x00, DEF_STR( On ) )
- PORT_DIPNAME( 0xc0, 0x00, "Console Baud rate" ) PORT_DIPLOCATION("S1:7,8")
- PORT_DIPSETTING( 0x00, "9600" )
- PORT_DIPSETTING( 0x40, "19200" )
- PORT_DIPSETTING( 0x80, "38400" )
- PORT_DIPSETTING( 0xc0, "57600" )
-
- // Settings with the MTR-89 ROM (#444-62)
- PORT_START("MTR89_SW501")
- PORT_DIPNAME( 0x03, 0x00, "Disk I/O #2" ) PORT_DIPLOCATION("S1:1,2")
- PORT_DIPSETTING( 0x00, "H-88-1" )
- PORT_DIPSETTING( 0x01, "H/Z-47" )
- PORT_DIPSETTING( 0x02, "Undefined" )
- PORT_DIPSETTING( 0x03, "Undefined" )
- PORT_DIPNAME( 0x0c, 0x00, "Disk I/O #1" ) PORT_DIPLOCATION("S1:3,4")
- PORT_DIPSETTING( 0x00, "Unused" )
- PORT_DIPSETTING( 0x04, "H/Z-47" )
- PORT_DIPSETTING( 0x08, "Undefined" )
- PORT_DIPSETTING( 0x0c, "Undefined" )
- PORT_DIPNAME( 0x10, 0x00, "Primary Boot from" ) PORT_DIPLOCATION("S1:5")
- PORT_DIPSETTING( 0x00, "Disk I/O #2" )
- PORT_DIPSETTING( 0x10, "Disk I/O #1" )
- PORT_DIPNAME( 0x20, 0x20, "Perform memory test at start" ) PORT_DIPLOCATION("S1:6")
- PORT_DIPSETTING( 0x20, DEF_STR( Off ) )
- PORT_DIPSETTING( 0x00, DEF_STR( On ) )
- PORT_DIPNAME( 0x40, 0x00, "Console Baud rate" ) PORT_DIPLOCATION("S1:7")
- PORT_DIPSETTING( 0x00, "9600" )
- PORT_DIPSETTING( 0x40, "19200" )
- PORT_DIPNAME( 0x80, 0x00, "Boot mode" ) PORT_DIPLOCATION("S1:8")
- PORT_DIPSETTING( 0x00, DEF_STR( Normal ) )
- PORT_DIPSETTING( 0x80, "Auto" )
-*/
- // Settings with the MTR-90 ROM (#444-84 or 444-142)
- PORT_START("MTR90_SW501")
- PORT_DIPNAME( 0x03, 0x00, "Disk I/O #2" ) PORT_DIPLOCATION("SW501:1,2")
+
+ PORT_START("SW501")
+ // Generic definition
+ PORT_DIPNAME( 0x01, 0x00, "Switch 0" ) PORT_DIPLOCATION("SW501:1") PORT_CONDITION("CONFIG", 0x3c, EQUALS, 0x00)
+ PORT_DIPSETTING( 0x00, DEF_STR( Off ) )
+ PORT_DIPSETTING( 0x01, DEF_STR( On ) )
+ PORT_DIPNAME( 0x02, 0x00, "Switch 1" ) PORT_DIPLOCATION("SW501:2") PORT_CONDITION("CONFIG", 0x3c, EQUALS, 0x00)
+ PORT_DIPSETTING( 0x00, DEF_STR( Off ) )
+ PORT_DIPSETTING( 0x02, DEF_STR( On ) )
+ PORT_DIPNAME( 0x04, 0x00, "Switch 2" ) PORT_DIPLOCATION("SW501:3") PORT_CONDITION("CONFIG", 0x3c, EQUALS, 0x00)
+ PORT_DIPSETTING( 0x00, DEF_STR( Off ) )
+ PORT_DIPSETTING( 0x04, DEF_STR( On ) )
+ PORT_DIPNAME( 0x08, 0x00, "Switch 3" ) PORT_DIPLOCATION("SW501:4") PORT_CONDITION("CONFIG", 0x3c, EQUALS, 0x00)
+ PORT_DIPSETTING( 0x00, DEF_STR( Off ) )
+ PORT_DIPSETTING( 0x08, DEF_STR( On ) )
+ PORT_DIPNAME( 0x10, 0x00, "Switch 4" ) PORT_DIPLOCATION("SW501:5") PORT_CONDITION("CONFIG", 0x3c, EQUALS, 0x00)
+ PORT_DIPSETTING( 0x00, DEF_STR( Off ) )
+ PORT_DIPSETTING( 0x10, DEF_STR( On ) )
+ PORT_DIPNAME( 0x20, 0x20, "Switch 5" ) PORT_DIPLOCATION("SW501:6") PORT_CONDITION("CONFIG", 0x3c, EQUALS, 0x00)
+ PORT_DIPSETTING( 0x00, DEF_STR( Off ) )
+ PORT_DIPSETTING( 0x20, DEF_STR( On ) )
+ PORT_DIPNAME( 0x40, 0x00, "Switch 6" ) PORT_DIPLOCATION("SW501:7") PORT_CONDITION("CONFIG", 0x3c, EQUALS, 0x00)
+ PORT_DIPSETTING( 0x00, DEF_STR( Off ) )
+ PORT_DIPSETTING( 0x40, DEF_STR( On ) )
+ PORT_DIPNAME( 0x80, 0x00, "Switch 7" ) PORT_DIPLOCATION("SW501:8") PORT_CONDITION("CONFIG", 0x3c, EQUALS, 0x00)
+ PORT_DIPSETTING( 0x00, DEF_STR( Off ) )
+ PORT_DIPSETTING( 0x80, DEF_STR( On ) )
+
+ // MTR-90 (444-84 or 444-142)
+ PORT_DIPNAME( 0x03, 0x00, "Disk I/O #2" ) PORT_DIPLOCATION("SW501:1,2") PORT_CONDITION("CONFIG", 0x3c, EQUALS, 0x04)
PORT_DIPSETTING( 0x00, "H-88-1 (Not yet implemented)" )
PORT_DIPSETTING( 0x01, "H/Z-47 (Not yet implemented)" )
PORT_DIPSETTING( 0x02, "Z-67 (Not yet implemented)" )
PORT_DIPSETTING( 0x03, "Undefined" )
- PORT_DIPNAME( 0x0c, 0x00, "Disk I/O #1" ) PORT_DIPLOCATION("SW501:3,4")
+ PORT_DIPNAME( 0x0c, 0x00, "Disk I/O #1" ) PORT_DIPLOCATION("SW501:3,4") PORT_CONDITION("CONFIG", 0x3c, EQUALS, 0x04)
PORT_DIPSETTING( 0x00, "H-89-37" )
PORT_DIPSETTING( 0x04, "H/Z-47 (Not yet implemented)" )
PORT_DIPSETTING( 0x08, "Z-67 (Not yet implemented)" )
PORT_DIPSETTING( 0x0c, "Undefined" )
- PORT_DIPNAME( 0x10, 0x00, "Primary Boot from" ) PORT_DIPLOCATION("SW501:5")
+ PORT_DIPNAME( 0x10, 0x00, "Primary Boot from" ) PORT_DIPLOCATION("SW501:5") PORT_CONDITION("CONFIG", 0x3c, EQUALS, 0x04)
PORT_DIPSETTING( 0x00, "Disk I/O #2" )
PORT_DIPSETTING( 0x10, "Disk I/O #1" )
- PORT_DIPNAME( 0x20, 0x20, "Perform memory test at start" ) PORT_DIPLOCATION("SW501:6")
- PORT_DIPSETTING( 0x20, DEF_STR( Off ) )
- PORT_DIPSETTING( 0x00, DEF_STR( On ) )
- PORT_DIPNAME( 0x40, 0x00, "Console Baud rate" ) PORT_DIPLOCATION("SW501:7")
+ PORT_DIPNAME( 0x20, 0x20, "Perform memory test at start" ) PORT_DIPLOCATION("SW501:6") PORT_CONDITION("CONFIG", 0x3c, EQUALS, 0x04)
+ PORT_DIPSETTING( 0x20, DEF_STR( No ) )
+ PORT_DIPSETTING( 0x00, DEF_STR( Yes ) )
+ PORT_DIPNAME( 0x40, 0x00, "Console Baud rate" ) PORT_DIPLOCATION("SW501:7") PORT_CONDITION("CONFIG", 0x3c, EQUALS, 0x04)
PORT_DIPSETTING( 0x00, "9600" )
PORT_DIPSETTING( 0x40, "19200" )
- PORT_DIPNAME( 0x80, 0x00, "Boot mode" ) PORT_DIPLOCATION("SW501:8")
+ PORT_DIPNAME( 0x80, 0x00, "Boot mode" ) PORT_DIPLOCATION("SW501:8") PORT_CONDITION("CONFIG", 0x3c, EQUALS, 0x04)
PORT_DIPSETTING( 0x00, DEF_STR( Normal ) )
PORT_DIPSETTING( 0x80, "Auto" )
-/*
- // Settings with the MMS 84-B
- PORT_START("MMS84B_SW501")
- PORT_DIPNAME( 0x03, 0x00, "Disk I/O #2" ) PORT_DIPLOCATION("S1:1,2")
- PORT_DIPSETTING( 0x00, "H-88-1" )
- PORT_DIPSETTING( 0x01, "H/Z-47 (Not yet implemented)" )
- PORT_DIPSETTING( 0x02, "MMS 77320 SASI or Z-67 (Not yet implemented)" )
- PORT_DIPSETTING( 0x03, "MMS 77422 Network Controller" )
- PORT_DIPNAME( 0x0c, 0x00, "Disk I/O #1" ) PORT_DIPLOCATION("S1:3,4")
- PORT_DIPSETTING( 0x00, "H-89-37" )
- PORT_DIPSETTING( 0x04, "H/Z-47 (Not yet implemented)" )
- PORT_DIPSETTING( 0x08, "MMS 77320 SASI or Z-67 (Not yet implemented)" )
- PORT_DIPSETTING( 0x0c, "MMS 77422 Network Controller" )
- PORT_DIPNAME( 0x70, 0x00, "Default Boot Device" ) PORT_DIPLOCATION("S1:5,6,7")
- PORT_DIPSETTING( 0x00, "MMS 77316 Dbl Den 5\"" )
- PORT_DIPSETTING( 0x10, "MMS 77316 Dbl Den 8\"" )
- PORT_DIPSETTING( 0x20, "Disk Device at 0x7C" )
- PORT_DIPSETTING( 0x30, "Disk Device at 0x78" )
- PORT_DIPSETTING( 0x40, "reserved for future use" )
- PORT_DIPSETTING( 0x50, "reserved for future use" )
- PORT_DIPSETTING( 0x60, "MMS Network (77422)" )
- PORT_DIPSETTING( 0x70, "Use MMS I/O board Config Port" )
- PORT_DIPNAME( 0x80, 0x00, "Boot mode" ) PORT_DIPLOCATION("S1:8")
- PORT_DIPSETTING( 0x00, DEF_STR( Normal ) )
- PORT_DIPSETTING( 0x80, "Auto" )
-
- // Settings for the Kres KMR-100
-
- PORT_START("MTR90_SW501")
- PORT_DIPNAME( 0x0f, 0x00, "Default Boot Device" ) PORT_DIPLOCATION("SW501:1,2,3,4")
- PORT_DIPSETTING( 0x00, "H-17 hard-sectored 5\" floppy units 0-2" )
- PORT_DIPSETTING( 0x01, "H-37 soft-sectored 5\" floppy units 0-3" )
- PORT_DIPSETTING( 0x02, "Corvus hard disk/Magnolia interface, partitions 0-8" )
- PORT_DIPSETTING( 0x03, "CDR 5\"/8\" double density floppy, units 0-3" )
- PORT_DIPSETTING( 0x04, "H-47 8\" floppy at port 0x78/0170, units 0-3" )
- PORT_DIPSETTING( 0x05, "H-47 8\" floppy at port 0x7c/0174, units 0-3" )
- PORT_DIPSETTING( 0x06, "Reserved" )
- PORT_DIPSETTING( 0x07, "Help - lists boot devices" )
- PORT_DIPSETTING( 0x08, "Reserved" )
- PORT_DIPSETTING( 0x09, "SASI controller or Z-67 at port 0x78/0170, units 0-7" )
- PORT_DIPSETTING( 0x0a, "SASI controller or Z-67 at port 0x7c/0174, units 0-7" )
- PORT_DIPSETTING( 0x0b, "Livingston 8\" single density floppy, units 0-3" )
- PORT_DIPSETTING( 0x0c, "Magnolia 5\"/8\" double density floppy, units 0-3 (8\"), 4-7 (5\")" )
- PORT_DIPSETTING( 0x0d, "Reserved" )
- PORT_DIPSETTING( 0x0e, "Reserved" )
- PORT_DIPSETTING( 0x0f, "Magnolia 128K pseudo disk, banks 0-1" )
- PORT_DIPNAME( 0x10, 0x00, "Map ROM into RAM" ) PORT_DIPLOCATION("SW501:5")
- PORT_DIPSETTING( 0x00, "Map to RAM" )
- PORT_DIPSETTING( 0x10, "ROM" )
- PORT_DIPNAME( 0x20, 0x20, "Perform memory test at start" ) PORT_DIPLOCATION("SW501:6")
- PORT_DIPSETTING( 0x20, DEF_STR( Off ) )
- PORT_DIPSETTING( 0x00, DEF_STR( On ) )
- PORT_DIPNAME( 0x40, 0x00, "LLL controller" ) PORT_DIPLOCATION("SW501:7")
- PORT_DIPSETTING( 0x00, "No LLL controller" )
- PORT_DIPSETTING( 0x40, "LLL controller" )
- PORT_DIPNAME( 0x80, 0x00, "Boot mode" ) PORT_DIPLOCATION("SW501:8")
- PORT_DIPSETTING( 0x00, DEF_STR( Normal ) )
- PORT_DIPSETTING( 0x80, "Auto" )
-*/
+
+ // MTR-88 (444-40)
+ PORT_DIPNAME( 0x1f, 0x00, "Unused" ) PORT_DIPLOCATION("SW501:1,2,3,4,5") PORT_CONDITION("CONFIG", 0x3c, EQUALS, 0x08)
+ PORT_DIPNAME( 0x20, 0x20, "Perform memory test at start" ) PORT_DIPLOCATION("SW501:6") PORT_CONDITION("CONFIG", 0x3c, EQUALS, 0x08)
+ PORT_DIPSETTING( 0x20, DEF_STR( No ) )
+ PORT_DIPSETTING( 0x00, DEF_STR( Yes ) )
+ PORT_DIPNAME( 0xc0, 0x00, "Console Baud rate" ) PORT_DIPLOCATION("SW501:7,8") PORT_CONDITION("CONFIG", 0x3c, EQUALS, 0x08)
+ PORT_DIPSETTING( 0x00, "9600" )
+ PORT_DIPSETTING( 0x40, "19200" )
+ PORT_DIPSETTING( 0x80, "38400" )
+ PORT_DIPSETTING( 0xc0, "57600" )
+
+ // MTR-89 (444-62)
+ PORT_DIPNAME( 0x03, 0x00, "Disk I/O #2" ) PORT_DIPLOCATION("SW501:1,2") PORT_CONDITION("CONFIG", 0x3c, EQUALS, 0x0c)
+ PORT_DIPSETTING( 0x00, "H-88-1" )
+ PORT_DIPSETTING( 0x01, "H/Z-47" )
+ PORT_DIPSETTING( 0x02, "Undefined" )
+ PORT_DIPSETTING( 0x03, "Undefined" )
+ PORT_DIPNAME( 0x0c, 0x00, "Disk I/O #1" ) PORT_DIPLOCATION("SW501:3,4") PORT_CONDITION("CONFIG", 0x3c, EQUALS, 0x0c)
+ PORT_DIPSETTING( 0x00, "Unused" )
+ PORT_DIPSETTING( 0x04, "H/Z-47" )
+ PORT_DIPSETTING( 0x08, "Undefined" )
+ PORT_DIPSETTING( 0x0c, "Undefined" )
+ PORT_DIPNAME( 0x10, 0x00, "Primary Boot from" ) PORT_DIPLOCATION("SW501:5") PORT_CONDITION("CONFIG", 0x3c, EQUALS, 0x0c)
+ PORT_DIPSETTING( 0x00, "Disk I/O #2" )
+ PORT_DIPSETTING( 0x10, "Disk I/O #1" )
+ PORT_DIPNAME( 0x20, 0x20, "Perform memory test at start" ) PORT_DIPLOCATION("SW501:6") PORT_CONDITION("CONFIG", 0x3c, EQUALS, 0x0c)
+ PORT_DIPSETTING( 0x20, DEF_STR( No ) )
+ PORT_DIPSETTING( 0x00, DEF_STR( Yes ) )
+ PORT_DIPNAME( 0x40, 0x00, "Console Baud rate" ) PORT_DIPLOCATION("SW501:7") PORT_CONDITION("CONFIG", 0x3c, EQUALS, 0x0c)
+ PORT_DIPSETTING( 0x00, "9600" )
+ PORT_DIPSETTING( 0x40, "19200" )
+ PORT_DIPNAME( 0x80, 0x00, "Boot mode" ) PORT_DIPLOCATION("SW501:8") PORT_CONDITION("CONFIG", 0x3c, EQUALS, 0x0c)
+ PORT_DIPSETTING( 0x00, DEF_STR( Normal ) )
+ PORT_DIPSETTING( 0x80, "Auto" )
+
+ // MMS 84-B
+ PORT_DIPNAME( 0x03, 0x00, "Disk I/O #2" ) PORT_DIPLOCATION("SW501:1,2") PORT_CONDITION("CONFIG", 0x3c, EQUALS, 0x10)
+ PORT_DIPSETTING( 0x00, "H-88-1" )
+ PORT_DIPSETTING( 0x01, "H/Z-47 (Not yet implemented)" )
+ PORT_DIPSETTING( 0x02, "MMS 77320 SASI or Z-67 (Not yet implemented)" )
+ PORT_DIPSETTING( 0x03, "MMS 77422 Network Controller" )
+ PORT_DIPNAME( 0x0c, 0x00, "Disk I/O #1" ) PORT_DIPLOCATION("SW501:3,4") PORT_CONDITION("CONFIG", 0x3c, EQUALS, 0x10)
+ PORT_DIPSETTING( 0x00, "H-89-37" )
+ PORT_DIPSETTING( 0x04, "H/Z-47 (Not yet implemented)" )
+ PORT_DIPSETTING( 0x08, "MMS 77320 SASI or Z-67 (Not yet implemented)" )
+ PORT_DIPSETTING( 0x0c, "MMS 77422 Network Controller" )
+ PORT_DIPNAME( 0x70, 0x00, "Default Boot Device" ) PORT_DIPLOCATION("SW501:5,6,7") PORT_CONDITION("CONFIG", 0x3c, EQUALS, 0x10)
+ PORT_DIPSETTING( 0x00, "MMS 77316 Dbl Den 5\"" )
+ PORT_DIPSETTING( 0x10, "MMS 77316 Dbl Den 8\"" )
+ PORT_DIPSETTING( 0x20, "Disk Device at 0x7C" )
+ PORT_DIPSETTING( 0x30, "Disk Device at 0x78" )
+ PORT_DIPSETTING( 0x40, "reserved for future use" )
+ PORT_DIPSETTING( 0x50, "reserved for future use" )
+ PORT_DIPSETTING( 0x60, "MMS Network (77422)" )
+ PORT_DIPSETTING( 0x70, "Use MMS I/O board Config Port" )
+ PORT_DIPNAME( 0x80, 0x00, "Boot mode" ) PORT_DIPLOCATION("SW501:8") PORT_CONDITION("CONFIG", 0x3c, EQUALS, 0x10)
+ PORT_DIPSETTING( 0x00, DEF_STR( Normal ) )
+ PORT_DIPSETTING( 0x80, "Auto" )
+
+ // Kres KMR-100
+ PORT_DIPNAME( 0x0f, 0x00, "Default Boot Device" ) PORT_DIPLOCATION("SW501:1,2,3,4") PORT_CONDITION("CONFIG", 0x3c, EQUALS, 0x14)
+ PORT_DIPSETTING( 0x00, "H-17 hard-sectored 5\" floppy units 0-2" )
+ PORT_DIPSETTING( 0x01, "H-37 soft-sectored 5\" floppy units 0-3" )
+ PORT_DIPSETTING( 0x02, "Corvus hard disk/Magnolia interface, partitions 0-8" )
+ PORT_DIPSETTING( 0x03, "CDR 5\"/8\" double density floppy, units 0-3" )
+ PORT_DIPSETTING( 0x04, "H-47 8\" floppy at port 0x78/0170, units 0-3" )
+ PORT_DIPSETTING( 0x05, "H-47 8\" floppy at port 0x7c/0174, units 0-3" )
+ PORT_DIPSETTING( 0x06, "Reserved" )
+ PORT_DIPSETTING( 0x07, "Help - lists boot devices" )
+ PORT_DIPSETTING( 0x08, "Reserved" )
+ PORT_DIPSETTING( 0x09, "SASI controller or Z-67 at port 0x78/0170, units 0-7" )
+ PORT_DIPSETTING( 0x0a, "SASI controller or Z-67 at port 0x7c/0174, units 0-7" )
+ PORT_DIPSETTING( 0x0b, "Livingston 8\" single density floppy, units 0-3" )
+ PORT_DIPSETTING( 0x0c, "Magnolia 5\"/8\" double density floppy, units 0-3 (8\"), 4-7 (5\")" )
+ PORT_DIPSETTING( 0x0d, "Reserved" )
+ PORT_DIPSETTING( 0x0e, "Reserved" )
+ PORT_DIPSETTING( 0x0f, "Magnolia 128K pseudo disk, banks 0-1" )
+ PORT_DIPNAME( 0x10, 0x00, "Map ROM into RAM" ) PORT_DIPLOCATION("SW501:5") PORT_CONDITION("CONFIG", 0x3c, EQUALS, 0x14)
+ PORT_DIPSETTING( 0x00, "Map to RAM" )
+ PORT_DIPSETTING( 0x10, "ROM" )
+ PORT_DIPNAME( 0x20, 0x20, "Perform memory test at start" ) PORT_DIPLOCATION("SW501:6") PORT_CONDITION("CONFIG", 0x3c, EQUALS, 0x14)
+ PORT_DIPSETTING( 0x20, DEF_STR( No ) )
+ PORT_DIPSETTING( 0x00, DEF_STR( Yes ) )
+ PORT_DIPNAME( 0x40, 0x00, "LLL controller" ) PORT_DIPLOCATION("SW501:7") PORT_CONDITION("CONFIG", 0x3c, EQUALS, 0x14)
+ PORT_DIPSETTING( 0x00, "No LLL controller" )
+ PORT_DIPSETTING( 0x40, "LLL controller" )
+ PORT_DIPNAME( 0x80, 0x00, "Boot mode" ) PORT_DIPLOCATION("SW501:8") PORT_CONDITION("CONFIG", 0x3c, EQUALS, 0x14)
+ PORT_DIPSETTING( 0x00, DEF_STR( Normal ) )
+ PORT_DIPSETTING( 0x80, "Auto" )
+
PORT_START("CONFIG")
PORT_CONFNAME(0x03, 0x00, "CPU Clock Speed Upgrade")
PORT_CONFSETTING(0x00, DEF_STR( None ) )
PORT_CONFSETTING(0x01, "2 / 4 MHz")
PORT_CONFSETTING(0x02, "2 / 6 MHz")
+ PORT_CONFNAME(0x3c, 0x04, "Switch SW501 Definitions")
+ PORT_CONFSETTING(0x00, "Generic" )
+ PORT_CONFSETTING(0x04, "Heath MTR-90")
+ PORT_CONFSETTING(0x08, "Heath MTR-88")
+ PORT_CONFSETTING(0x0c, "Heath MTR-89")
+ PORT_CONFSETTING(0x10, "MMS 84B")
+ PORT_CONFSETTING(0x14, "Kres KMR-100")
+
INPUT_PORTS_END